RE: Need Cisco expert help [7:34894]

2002-02-08 Thread Vincent Miller

Is 100.0.0.0 registered to you ?
where is the connection to the internet, and how are you translating 
addresses ?


Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=34899t=34894
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]



Re: Need Cisco expert help [7:34894]

2002-02-08 Thread [EMAIL PROTECTED]

I am taking a stab here trying to visualize what you are talking about. But
if you are not doing any routing on the routers outside of statics do you
have ip default-gateway set? Yes when you are not doing routing like eigrp
and ospf you use the default gateway command.
Maybe this will help.


   

   
Mixa
   
cc:
Sent by: Subject: Need Cisco expert help
[7:34894]
   
nobody
   

   

   
02/08/2002
02:54
PM
   
Please
respond
to
   
Mixa
   

   





Thanks for all your help with my previous post. I'll give it a try tonight.
Here is my current situation. I have 3 networks:
192.168.0.0
100.0.0.0
10.0.0.0

Network 1: 192.168.0.0

I have 2 Cisco 2500s, two different win2k domains. i'll like to simulate a
real network but things are not working. Here is my configuration:

I have a DSL router/switch 4 ports with a default IP 192.168.0.1 and NAT.
This segment is 192.168.0.0. In this segment, i have one WIN2K server call
WIN2KAD1 this server can see the internet because it's IP address is
192.168.0.2. I put static IP for it with local DNS 127.0.0.1. In this
segment, i have one Cisco router 2501 connected to the DSL router/switch
and
it's Ethernet E0 has an IP address of 192.168.0.3. It has IOS 12.5. This is
my 192.168.0.0 network.

Network 2: 100.0.0.0
The 2 routers connected to each other using a back-to-back cable. No frame
relay this time. This network is 100.0.0.1 connected to the serial S1 of
the
first Cisco2051. The second Cisco2503 serial1 is connected to the first one
using back-toback cable and its IP address is 100.0.0.2.


Network 3: 10.0.0.0

On the E0 side of the Cisco 2503, its IP address is 10.0.0.1 and i
connected
a crossover cable to my other Win2k box and this box has an IP 10.0.0.2.

What I did?

I used route add on the first Win2k box so that 192.168.0.0 can talk to
100.0.0.0 and 10.0.0.0
I configured static route on both of the cisco router so that network
10.0.0.0 can talk to 192.168.0.0 and 100.0.0.0

All communications are working. I can ping everything from every subnet.
But
I CAN NOT SURF the web from my 10.0.0.0 network. What am i doing wrong
here?

I know this is a long post but please give it a shoot.

Thanks,
Mixa




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=34900t=34894
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]



Re: Need Cisco expert help [7:34894]

2002-02-08 Thread Mixa

The 100.0.0.0 is just a network between the Serial interfaces of the 2
routers. I put put the number in. It's not register. Everything is behind
the DSL/router/firewall using NAT. The connection to the internet is my DSL
router/firewall.


Vincent Miller  wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
 Is 100.0.0.0 registered to you ?
 where is the connection to the internet, and how are you translating
 addresses ?




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=34901t=34894
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]



Re: Need Cisco expert help [7:34894]

2002-02-08 Thread Mixa

So which commands is correct then?
Cisco2503(config)#ip default-gateway 0.0.0.0

This is my router on the 10.0.0.0 network


Or

Cisco2503(config)#ip default-gateway 192.168.0.0

(DSLRouterNAT)192.168.0.1--192.168.0.2(Cisco2501)100.0.0.1--
-100.0.0.2(Cisco2503)---10.0.0.1

How to make a server in 10.0.0.0 see the internet? 10.0.0.2 is the server IP







 wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
 I am taking a stab here trying to visualize what you are talking about.
But
 if you are not doing any routing on the routers outside of statics do you
 have ip default-gateway set? Yes when you are not doing routing like eigrp
 and ospf you use the default gateway command.
 Maybe this will help.




 Mixa

 cc:
 Sent by: Subject: Need Cisco expert
help
 [7:34894]

 nobody



 02/08/2002
 02:54
 PM

 Please
 respond
 to

 Mixa






 Thanks for all your help with my previous post. I'll give it a try
tonight.
 Here is my current situation. I have 3 networks:
 192.168.0.0
 100.0.0.0
 10.0.0.0

 Network 1: 192.168.0.0

 I have 2 Cisco 2500s, two different win2k domains. i'll like to simulate a
 real network but things are not working. Here is my configuration:

 I have a DSL router/switch 4 ports with a default IP 192.168.0.1 and NAT.
 This segment is 192.168.0.0. In this segment, i have one WIN2K server call
 WIN2KAD1 this server can see the internet because it's IP address is
 192.168.0.2. I put static IP for it with local DNS 127.0.0.1. In this
 segment, i have one Cisco router 2501 connected to the DSL router/switch
 and
 it's Ethernet E0 has an IP address of 192.168.0.3. It has IOS 12.5. This
is
 my 192.168.0.0 network.

 Network 2: 100.0.0.0
 The 2 routers connected to each other using a back-to-back cable. No frame
 relay this time. This network is 100.0.0.1 connected to the serial S1 of
 the
 first Cisco2051. The second Cisco2503 serial1 is connected to the first
one
 using back-toback cable and its IP address is 100.0.0.2.


 Network 3: 10.0.0.0

 On the E0 side of the Cisco 2503, its IP address is 10.0.0.1 and i
 connected
 a crossover cable to my other Win2k box and this box has an IP 10.0.0.2.

 What I did?

 I used route add on the first Win2k box so that 192.168.0.0 can talk to
 100.0.0.0 and 10.0.0.0
 I configured static route on both of the cisco router so that network
 10.0.0.0 can talk to 192.168.0.0 and 100.0.0.0

 All communications are working. I can ping everything from every subnet.
 But
 I CAN NOT SURF the web from my 10.0.0.0 network. What am i doing wrong
 here?

 I know this is a long post but please give it a shoot.

 Thanks,
 Mixa




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7i=34902t=34894
--
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]