Re: Pre-routing [7:61364]
Yes, the solution is policy based routing. Its not very difficult. You define access-lists to identify the traffic you want to policy route. Use route-maps to force the traffic out the desired network/interface. Here is a link to Cisco's documentation: (watch the wrap) http://www.cisco.com/en/US/products/sw/iosswrel/ps1831/products_configuratio n_guide_chapter09186a00800c60d2.html Good luck Lance ""Domingo Ferrero"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > > This is correct. > > You have one solution? > > Thanks and regards, > > -- > --- > Domingo Ferrero Saavedra [EMAIL PROTECTED] > Dept. Sistemas, IdecNet S.A. > c/ Guzman el Bueno 125 > Madrid-Spain > Tfn: +34 91 824 00 00 > http://www.idecnet.com > --- > ""Captain Lance"" escribis en el mensaje > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > This sounds like you want to use Policy-based routing. You want all the > > traffic from the PC on the ethernet interface of the 7200 to be routed out > > the ATM interface? Is this correct? > > > > Lance > > > > ""Domingo Ferrero"" wrote in message > > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > > Hi, > > > > > > I have one router cisco 7200, and two conexions to the other two > routers. > > > > > > Conexion a: point-to-point > > > Conexion b: ATM > > > > > > I want that one pc to the lan of 7200 route to the atm interface but > the > > > interface point-to-point have configured eigrp. > > > > > > Somebody can help me, I think that the solution is in the access-list or > > > prerouting, but i don't know how i can have it. > > > > > > Thanks and Regards, > > > > > > -- > > > --- > > > Domingo Ferrero Saavedra [EMAIL PROTECTED] > > > Dept. Sistemas, IdecNet S.A. > > > c/ Guzman el Bueno 125 > > > Madrid-Spain > > > Tfn: +34 91 824 00 00 > > > http://www.idecnet.com > > > --- Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61379&t=61364 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Pre-routing [7:61364]
Hi, This is correct. You have one solution? Thanks and regards, -- --- Domingo Ferrero Saavedra [EMAIL PROTECTED] Dept. Sistemas, IdecNet S.A. c/ Guzman el Bueno 125 Madrid-Spain Tfn: +34 91 824 00 00 http://www.idecnet.com --- ""Captain Lance"" escribis en el mensaje [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > This sounds like you want to use Policy-based routing. You want all the > traffic from the PC on the ethernet interface of the 7200 to be routed out > the ATM interface? Is this correct? > > Lance > > ""Domingo Ferrero"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > Hi, > > > > I have one router cisco 7200, and two conexions to the other two routers. > > > > Conexion a: point-to-point > > Conexion b: ATM > > > > I want that one pc to the lan of 7200 route to the atm interface but the > > interface point-to-point have configured eigrp. > > > > Somebody can help me, I think that the solution is in the access-list or > > prerouting, but i don't know how i can have it. > > > > Thanks and Regards, > > > > -- > > --- > > Domingo Ferrero Saavedra [EMAIL PROTECTED] > > Dept. Sistemas, IdecNet S.A. > > c/ Guzman el Bueno 125 > > Madrid-Spain > > Tfn: +34 91 824 00 00 > > http://www.idecnet.com > > --- Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61375&t=61364 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Pre-routing [7:61364]
Policy based routing is the answer - use route-maps and access control lists. That should be everything you need Andrew > Hi, > > I have one router cisco 7200, and two conexions to the other two routers. > > Conexion a: point-to-point > Conexion b: ATM > > I want that one pc to the lan of 7200 route to the atm interface but the > interface point-to-point have configured eigrp. > > Somebody can help me, I think that the solution is in the access-list or > prerouting, but i don't know how i can have it. > > Thanks and Regards, > > -- > --- > Domingo Ferrero Saavedra [EMAIL PROTECTED] > Dept. Sistemas, IdecNet S.A. > c/ Guzman el Bueno 125 > Madrid-Spain > Tfn: +34 91 824 00 00 > http://www.idecnet.com > --- Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61373&t=61364 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Pre-routing [7:61364]
This sounds like you want to use Policy-based routing. You want all the traffic from the PC on the ethernet interface of the 7200 to be routed out the ATM interface? Is this correct? Lance ""Domingo Ferrero"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi, > > I have one router cisco 7200, and two conexions to the other two routers. > > Conexion a: point-to-point > Conexion b: ATM > > I want that one pc to the lan of 7200 route to the atm interface but the > interface point-to-point have configured eigrp. > > Somebody can help me, I think that the solution is in the access-list or > prerouting, but i don't know how i can have it. > > Thanks and Regards, > > -- > --- > Domingo Ferrero Saavedra [EMAIL PROTECTED] > Dept. Sistemas, IdecNet S.A. > c/ Guzman el Bueno 125 > Madrid-Spain > Tfn: +34 91 824 00 00 > http://www.idecnet.com > --- Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=61369&t=61364 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
