I'll need to do a quick search on CCO to verify this but I
don't think the 5ESS switch uses SPIDs, but the DMS-100 and
National ISDN-1 require them. IIRC, that is. I know there is
a link on CCO that shows the differences between the switch
types. Let me go look.
Okay, here's a link similar to what I was remembering:
http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/1
600/1600icg/isdn.htm
Regards,
John
Get your own "800" number
Voicemail, fax, email, and a lot more
http://www.ureach.com/reg/tag
On Tue, 01 Jan 2002, MADMAN ([EMAIL PROTECTED]) wrote:
>
> You do NEED to define your SPIDs
>
> Dave
>
> John Neiberger wrote:
>
> > It appears that the router is dialing but the calls are
> > failing. Can we see the output of "show isdn stat" as well
> > as "debug isdn events" and/or "debug isdn q921" and "debug
isdn
> > q931" ?
> >
> > John
> >
> >
> > Get your own "800" number
> > Voicemail, fax, email, and a lot more
> > http://www.ureach.com/reg/tag
> >
> > On Mon, 31 Dec 2001, McHugh Randy ([EMAIL PROTECTED])
wrote:
> >
> > > This is router 1
> > > r1#sh run int bri 0
> > > Building configuration...
> > >
> > > Current configuration : 124 bytes
> > > !
> > > interface BRI0
> > > ip address 172.16.2.1 255.255.255.0
> > > dialer string 2002
> > > dialer-group 1
> > > isdn switch-type basic-5ess
> > > end
> > > dialer-list 1 protocol ip permit
> > > r1#sh dialer
> > >
> > > BRI0 - dialer type = ISDN
> > >
> > > Dial String Successes FailuresLast DNIS Last
> > status
> > > 2002 0 1000:10:08
> > failed
> > > Default
> > > 0 incoming call(s) have been screened.
> > > 0 incoming call(s) rejected for callback.
> > >
> > > BRI0:1 - dialer type = ISDN
> > > Idle timer (120 secs), Fast idle timer (20 secs)
> > > Wait for carrier (30 secs), Re-enable (15 secs)
> > > Dialer state is idle
> > >
> > > BRI0:2 - dialer type = ISDN
> > > Idle timer (120 secs), Fast idle timer (20 secs)
> > > Wait for carrier (30 secs), Re-enable (15 secs)
> > > Dialer state is idle
> > > r1#
> > > 01:30:17: BR0 DDR: cdp, 275 bytes, outgoing uninteresting
(no
> > list
> > > matched)
> > > 01:30:17: BR0 DDR: sending broadcast to default
destination --
> > failed,
> > > not
> > > connected
> > >
> > > This is router 2
> > > r2#sh run int bri 0
> > > Building configuration...
> > >
> > > Current configuration : 124 bytes
> > > !
> > > interface BRI0
> > > ip address 172.16.2.2 255.255.255.0
> > > dialer string 2001
> > > dialer-group 1
> > > isdn switch-type basic-5ess
> > > end
> > > dialer-list 1 protocol ip permit
> > >
> > > r2#sh dialer
> > >
> > > BRI0 - dialer type = ISDN
> > >
> > > Dial String Successes FailuresLast DNIS Last
> > status
> > > 2001 0 200:16:14
> > failed
> > > Default
> > > 0 incoming call(s) have been screened.
> > > 0 incoming call(s) rejected for callback.
> > >
> > > BRI0:1 - dialer type = ISDN
> > > Idle timer (120 secs), Fast idle timer (20 secs)
> > > Wait for carrier (30 secs), Re-enable (15 secs)
> > > Dialer state is idle
> > >
> > > BRI0:2 - dialer type = ISDN
> > > Idle timer (120 secs), Fast idle timer (20 secs)
> > > Wait for carrier (30 secs), Re-enable (15 secs)
> > > Dialer state is idle
> > >
> > >
> > > I tried reversing the numbers for the dialer string like
2001
> > and 2002
> > > on
> > > each router just in case I had the numbers for the dialer
> > strings
> > > reversed
> > > but that did not help.
> > > Any suggestions appreciated.
> > > Thanks
> > > Randy
> > [EMAIL PROTECTED]
[EMAIL PROTECTED]
>
> --
> David Madland
> CCIE# 2016
> Senior Network Engineer
> Qwest Communications
> 612-664-3367
>
>
>
>
>
>
>
> You do NEED to define your SPIDs
> Dave
> John Neiberger wrote:
> It appears that the router is dialing
but the
> calls
> are
> failing. Can we see the output of "show isdn stat" as
well
> as "debug isdn events" and/or "debug isdn q921"
and "debug isdn
> q931" ?
> John
>
> Get your own "800" number
> Voicemail, fax, email, and a lot more
>
href="http://www.ureach.com/reg/tag";>http://www.ureach.com/reg/t
ag
> On Mon, 31 Dec 2001, McHugh Randy ([EMAIL PROTECTED])
wrote:
> > This is router 1
> > r1#sh run int bri 0
> > Building configuration...
> >
> > Current configuration : 124 bytes
> > !
> > interface BRI0
> > ip address 172.16.2.1 255.255.255.0
> > dialer string 2002
> > dialer-group 1
> > isdn switch-type basic-5ess
> > end
> > dialer-list 1 protocol ip permit
> > r1#sh dialer
> >
> > BRI0 - dialer type = ISDN
> >
> > Dial String Successes
> Failures
> Last DNIS Last
> status
> >
> 2002
> 0 10
> 00:10:08
> failed
> > Default
> > 0 incoming call(s) have been screened.
> > 0 incoming call(s) rejected for callback.
> >
> >
