Re: Traffic Analyses [7:39167]
a 486 with 16mb of ram, linux, and mrtg... -PAtrick >>> "Rafay Aslam" 03/22/02 11:25AM >>> HI Guys I wanted to know how much traffic is passing through my T1 or how much traffic is utilizing my T1 bandwidth. Tell me the most efficent and accurate way of finding it. Thanks, > Confidentiality Disclaimer This email and any files transmitted with it may contain confidential and /or proprietary information in the possession of WellStar Health System, Inc. ("WellStar") and is intended only for the individual or entity to whom addressed. This email may contain information that is held to be privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any unauthorized access, dissemination, distribution or copying of any information from this email is strictly prohibited, and may subject you to criminal and/or civil liability. If you have received this email in error, please notify the sender by reply email and then delete this email and its attachments from your computer. Thank you. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39169&t=39167 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Traffic Analyses [7:39167]
MRTG and any old computer running your favorite flavor of linux ""Rafay Aslam"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > HI Guys > I wanted to know how much traffic is passing through my T1 or how much > traffic is utilizing my T1 bandwidth. Tell me the most efficent and accurate > way of finding it. > > Thanks, Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39170&t=39167 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Traffic Analyses [7:39167]
Guys I wanted to know traffic utilization on my T1 which is connected with a Cisco2600 router. ? ""Patrick Ramsey"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > a 486 with 16mb of ram, linux, and mrtg... > > -PAtrick > > >>> "Rafay Aslam" 03/22/02 11:25AM >>> > HI Guys > I wanted to know how much traffic is passing through my T1 or how much > traffic is utilizing my T1 bandwidth. Tell me the most efficent and accurate > way of finding it. > > Thanks, > > Confidentiality DisclaimerThis email and any files transmitted with it may contain confidential and > /or proprietary information in the possession of WellStar Health System, > Inc. ("WellStar") and is intended only for the individual or entity to whom > addressed. This email may contain information that is held to be > privileged, confidential and exempt from disclosure under applicable law. If > the reader of this message is not the intended recipient, you are hereby > notified that any unauthorized access, dissemination, distribution or > copying of any information from this email is strictly prohibited, and may > subject you to criminal and/or civil liability. If you have received this > email in error, please notify the sender by reply email and then delete this > email and its attachments from your computer. Thank you. > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39173&t=39167 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Traffic Analyses [7:39167]
As everyone else suggested, the free way to do it is run MRTG ( www.mrtg.org ). It can be run on Windows and Linux, better and easier to setup on LINUX. You then configure snmp on your 2600. The machine running mrtg will collect the snmp data and make a graph of your traffic utilization over your serial interface. Here is what a sample graph looks like : http://www.stat.ee.ethz.ch/mrtg/rou-gw-switch-1-lp_129.132.99.91.html It had it installed and running on linux in less than 30 minutes. The other way route is www.solarwinds.net but it costs too much money for me. ""Rafay Aslam"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Guys > I wanted to know traffic utilization on my T1 which is connected with a > Cisco2600 router. > ? > > ""Patrick Ramsey"" wrote in message > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > a 486 with 16mb of ram, linux, and mrtg... > > > > -PAtrick > > > > >>> "Rafay Aslam" 03/22/02 11:25AM >>> > > HI Guys > > I wanted to know how much traffic is passing through my T1 or how much > > traffic is utilizing my T1 bandwidth. Tell me the most efficent and > accurate > > way of finding it. > > > > Thanks, > > > Confidentiality DisclaimerThis email and any files > transmitted with it may contain confidential and > > /or proprietary information in the possession of WellStar Health System, > > Inc. ("WellStar") and is intended only for the individual or entity to > whom > > addressed. This email may contain information that is held to be > > privileged, confidential and exempt from disclosure under applicable law. > If > > the reader of this message is not the intended recipient, you are hereby > > notified that any unauthorized access, dissemination, distribution or > > copying of any information from this email is strictly prohibited, and may > > subject you to criminal and/or civil liability. If you have received this > > email in error, please notify the sender by reply email and then delete > this > > email and its attachments from your computer. Thank you. > > > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39175&t=39167 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Traffic Analyses [7:39167]
you mean something like this? This is a png of our internet connection Use mrtg http://people.ee.ethz.ch/~oetiker/webtools/mrtg/ >>> "Rafay Aslam" 03/22/02 11:46AM >>> Guys I wanted to know traffic utilization on my T1 which is connected with a Cisco2600 router. ? ""Patrick Ramsey"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > a 486 with 16mb of ram, linux, and mrtg... > > -PAtrick > > >>> "Rafay Aslam" 03/22/02 11:25AM >>> > HI Guys > I wanted to know how much traffic is passing through my T1 or how much > traffic is utilizing my T1 bandwidth. Tell me the most efficent and accurate > way of finding it. > > Thanks, > > Confidentiality DisclaimerThis email and any files transmitted with it may contain confidential and > /or proprietary information in the possession of WellStar Health System, > Inc. ("WellStar") and is intended only for the individual or entity to whom > addressed. This email may contain information that is held to be > privileged, confidential and exempt from disclosure under applicable law. If > the reader of this message is not the intended recipient, you are hereby > notified that any unauthorized access, dissemination, distribution or > copying of any information from this email is strictly prohibited, and may > subject you to criminal and/or civil liability. If you have received this > email in error, please notify the sender by reply email and then delete this > email and its attachments from your computer. Thank you. > > > Confidentiality Disclaimer This email and any files transmitted with it may contain confidential and /or proprietary information in the possession of WellStar Health System, Inc. ("WellStar") and is intended only for the individual or entity to whom addressed. This email may contain information that is held to be privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any unauthorized access, dissemination, distribution or copying of any information from this email is strictly prohibited, and may subject you to criminal and/or civil liability. If you have received this email in error, please notify the sender by reply email and then delete this email and its attachments from your computer. Thank you. [GroupStudy.com removed an attachment of type image/png which had a name of jarjar_6-day.png] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39174&t=39167 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Traffic Analyses [7:39167]
An excellent piece of software is Concord. It uses SNMP to poll all the intefaces on all the routers in your network and gather bandwidth usage data from any day or time period. As weel as other useful things. Danny ""Rafay Aslam"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > HI Guys > I wanted to know how much traffic is passing through my T1 or how much > traffic is utilizing my T1 bandwidth. Tell me the most efficent and accurate > way of finding it. > > Thanks, Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39176&t=39167 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Traffic Analyses [7:39167]
> I wanted to know traffic utilization on my T1 which is > connected with a Cisco2600 router. MRTG is a freeware perl script that was written to gather router/switch interface statistics using SNMP. It creates attractive graphs and many of us use it to do long-term monitoring/graphing of their connections. You can get more information at www.mrtg.org. Of course, you could just do a SHOW INTERFACE command on the serial port and add the two data rates togetherif you just want to check once. CO05R201#sh int s0/0 Serial0/0 is up, line protocol is up [snip] 5 minute input rate 579000 bits/sec, 132 packets/sec 5 minute output rate 1241000 bits/sec, 242 packets/sec [snip] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39179&t=39167 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Traffic Analyses [7:39167]
>>> "Patrick Ramsey" 03/22 11:35 AM >>> a 486 with 16mb of ram, linux, and mrtg... -PAtrick >>> "Rafay Aslam" 03/22/02 11:25AM >>> HI Guys I wanted to know how much traffic is passing through my T1 or how much traffic is utilizing my T1 bandwidth. Tell me the most efficent and accurate way of finding it. Thanks, > Confidentiality Disclaimer This email and any files transmitted with it may contain confidential and /or proprietary information in the possession of WellStar Health System, Inc. ("WellStar") and is intended only for the individual or entity to whom addressed. This email may contain information that is held to be privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any unauthorized access, dissemination, distribution or copying of any information from this email is strictly prohibited, and may subject you to criminal and/or civil liability. If you have received this email in error, please notify the sender by reply email and then delete this email and its attachments from your computer. Thank you. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39186&t=39167 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Traffic Analyses [7:39167]
show interface serial That's the most efficient method! At 11:25 AM 3/22/02, Rafay Aslam wrote: >HI Guys >I wanted to know how much traffic is passing through my T1 or how much >traffic is utilizing my T1 bandwidth. Tell me the most efficent and accurate >way of finding it. > >Thanks, Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39210&t=39167 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Traffic Analyses [7:39167]
efficient? heh Maybe it's efficient per telnet session... :) oh yeah...that MUST be what you were talking about! now...let's see do that once every 5 minutes (assuming you work 24 hrs a day) and you would telnet into your router 288 times a day :) >>> "Priscilla Oppenheimer" 03/22/02 03:11PM >>> show interface serial That's the most efficient method! At 11:25 AM 3/22/02, Rafay Aslam wrote: >HI Guys >I wanted to know how much traffic is passing through my T1 or how much >traffic is utilizing my T1 bandwidth. Tell me the most efficent and accurate >way of finding it. > >Thanks, Priscilla Oppenheimer http://www.priscilla.com > Confidentiality Disclaimer This email and any files transmitted with it may contain confidential and /or proprietary information in the possession of WellStar Health System, Inc. ("WellStar") and is intended only for the individual or entity to whom addressed. This email may contain information that is held to be privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any unauthorized access, dissemination, distribution or copying of any information from this email is strictly prohibited, and may subject you to criminal and/or civil liability. If you have received this email in error, please notify the sender by reply email and then delete this email and its attachments from your computer. Thank you. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39223&t=39167 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Traffic Analyses [7:39167]
There are more options than mrtg, you could use nrg with RRD Tools Rafay Aslam wrote: > > HI Guys > I wanted to know how much traffic is passing through my T1 or > how much > traffic is utilizing my T1 bandwidth. Tell me the most efficent > and accurate > way of finding it. > > Thanks, > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39228&t=39167 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Traffic Analyses [7:39167]
can you guys explain me , how to setup SNMP on cisco router. command references would be greatly appreciated. -- Make a FREE long distance call from your PC! http://www.eboom.com/free/ ""David j"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > There are more options than mrtg, you could use nrg with RRD Tools > Rafay Aslam wrote: > > > > HI Guys > > I wanted to know how much traffic is passing through my T1 or > > how much > > traffic is utilizing my T1 bandwidth. Tell me the most efficent > > and accurate > > way of finding it. > > > > Thanks, Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39240&t=39167 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Traffic Analyses [7:39167]
> command references would be greatly appreciated. http://www.cisco.com/univercd/cc/td/doc/cisintwk/intsolns/as5xipmo/sysmgt. htm#xtocid14875 All of the basic questions about Cisco devices can be found by searching at www.cisco.com. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39244&t=39167 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Traffic Analyses [7:39167]
watch the word wrap, cut and paste if you need to. padd http://www.google.com/search?sourceid=navclient&q=configuring+snmp+ios >>> Noman 03/22/02 05:54PM >>> can you guys explain me , how to setup SNMP on cisco router. command references would be greatly appreciated. -- Make a FREE long distance call from your PC! http://www.eboom.com/free/ ""David j"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > There are more options than mrtg, you could use nrg with RRD Tools > Rafay Aslam wrote: > > > > HI Guys > > I wanted to know how much traffic is passing through my T1 or > > how much > > traffic is utilizing my T1 bandwidth. Tell me the most efficent > > and accurate > > way of finding it. > > > > Thanks, > Confidentiality Disclaimer This email and any files transmitted with it may contain confidential and /or proprietary information in the possession of WellStar Health System, Inc. ("WellStar") and is intended only for the individual or entity to whom addressed. This email may contain information that is held to be privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient, you are hereby notified that any unauthorized access, dissemination, distribution or copying of any information from this email is strictly prohibited, and may subject you to criminal and/or civil liability. If you have received this email in error, please notify the sender by reply email and then delete this email and its attachments from your computer. Thank you. Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=39254&t=39167 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]