Re: Re: interface vlan 1 -- no shut [7:53682]
Hi All, Tom very rightly pointed the management VLAN stuff. I would like to add on one more thing into it. What you were trying to do was, that you were trying to up a layer three interface, whereas VLANS, a layer two entity are created in the VLAN Database. regards, Vikram Get Your Private, Free E-mail from Indiatimes at http://email.indiatimes.com Buy Music, Video, CD-ROM, Audio-Books and Music Accessories from http://www.planetm.co.in Change the way you talk. Indiatimes presents Valufon, Your PC to Phone service with clear voice at rates far less than the normal ISD rates. Go to http://www.valufon.indiatimes.com. Choose your plan. BUY NOW. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=53798t=53682 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: interface vlan 1 -- no shut [7:53682]
Thanks, Yes i was in sub interface mode now I think about it. Thanks for the heads up. jb -Original Message- From: Tom Lisa To: [EMAIL PROTECTED] Sent: 9/20/2002 3:51 PM Subject: Re: interface vlan 1 -- no shut [7:53682] If the 3524 is like the 2950 then you just assign the interfaces to the VLAN's directly. For example: Sw(config)# int fa0/5 Sw(config-if)# switchport access vlan 10 Sw(config-if)#int fa0/6 Sw(config-if)# switchport access vlan 10 and so on. You don't create the vlans separately. BTW, when you created the vlan separately, did you find yourself in sub-int mode? You were actually creating another mgt vlan and only one can function at a time. HTH, Prof. Tom Lisa, CCAI Community College of Southern Nevada Cisco ATC/Regional Networking Academy John Brandis wrote: HI All, Got a strange problem on a 3524xl switch. Problem: Need to create 2 VLANS . I issue the statements interface vlan 1 ip address 10.64.18.250 255.255.255.0 no shut interface vlan 2 ip address 10.64.19.25 255.255.255.0 no shut However, when I run sh ip interfaces , I see that only interface vlan 1 is up. I go into int vlan 1 and issue a shutdown, then I notice that VLAN 2 interface comes up... Can any one help with this please, or is this just how it works ? John Brandis Network Security Engineer [EMAIL PROTECTED] Phone: +61 2 9278 0629 Helpdesk: +61 2 9278 0486 Level 20, THH 456 Kent St, Sydney ** visit http://www.solution6.com UK Customers - http://www.solution6.co.uk * This email message (and attachments) may contain information that is confidential to Solution 6. If you are not the intended recipient you cannot use, distribute or copy the message or attachments. In such a case, please notify the sender by return email immediately and erase all copies of the message and attachments. Opinions, conclusions and other information in this message and attachments that do not relate to the official business of Solution 6 are neither given nor endorsed by it. * [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=53702t=53682 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: interface vlan 1 -- no shut [7:53682]
Hi John, The VLAN Interfaces on the 3500/2900 XL series are management VLANs only and there can only be one up at a time. --- John Brandis wrote: HI All, Got a strange problem on a 3524xl switch. Problem: Need to create 2 VLANS . I issue the statements interface vlan 1 ip address 10.64.18.250 255.255.255.0 no shut interface vlan 2 ip address 10.64.19.25 255.255.255.0 no shut However, when I run sh ip interfaces , I see that only interface vlan 1 is up. I go into int vlan 1 and issue a shutdown, then I notice that VLAN 2 interface comes up... Can any one help with this please, or is this just how it works ? Level 20, THH 456 Kent St, Sydney ** visit http://www.solution6.com UK Customers - http://www.solution6.co.uk * This email message (and attachments) may contain information that is confidential to Solution 6. If you are not the intended recipient you cannot use, distribute or copy the message or attachments. In such a case, please notify the sender by return email immediately and erase all copies of the message and attachments. Opinions, conclusions and other information in this message and attachments that do not relate to the official business of Solution 6 are neither given nor endorsed by it. * [EMAIL PROTECTED] __ Do you Yahoo!? New DSL Internet Access from SBC Yahoo! http://sbc.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=53686t=53682 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: interface vlan 1 -- no shut [7:53682]
Only the management interface on a 35xx ( or 29xx ) can be active. Remember this switch doesn't have true layer 3 capabilities, it just has a layer 3 address for management purposes. To switch management interfaces, which is the switch's active vlan , go into the VLAN and type Management. Thanks Larry -Original Message- From: John Brandis [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 19, 2002 10:58 PM To: [EMAIL PROTECTED] Subject: interface vlan 1 -- no shut [7:53682] HI All, Got a strange problem on a 3524xl switch. Problem: Need to create 2 VLANS . I issue the statements interface vlan 1 ip address 10.64.18.250 255.255.255.0 no shut interface vlan 2 ip address 10.64.19.25 255.255.255.0 no shut However, when I run sh ip interfaces , I see that only interface vlan 1 is up. I go into int vlan 1 and issue a shutdown, then I notice that VLAN 2 interface comes up... Can any one help with this please, or is this just how it works ? John Brandis Network Security Engineer [EMAIL PROTECTED] Phone: +61 2 9278 0629 Helpdesk: +61 2 9278 0486 Level 20, THH 456 Kent St, Sydney ** visit http://www.solution6.com UK Customers - http://www.solution6.co.uk * This email message (and attachments) may contain information that is confidential to Solution 6. If you are not the intended recipient you cannot use, distribute or copy the message or attachments. In such a case, please notify the sender by return email immediately and erase all copies of the message and attachments. Opinions, conclusions and other information in this message and attachments that do not relate to the official business of Solution 6 are neither given nor endorsed by it. * Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=53687t=53682 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: interface vlan 1 -- no shut [7:53682]
If the 3524 is like the 2950 then you just assign the interfaces to the VLAN's directly. For example: Sw(config)# int fa0/5 Sw(config-if)# switchport access vlan 10 Sw(config-if)#int fa0/6 Sw(config-if)# switchport access vlan 10 and so on. You don't create the vlans separately. BTW, when you created the vlan separately, did you find yourself in sub-int mode? You were actually creating another mgt vlan and only one can function at a time. HTH, Prof. Tom Lisa, CCAI Community College of Southern Nevada Cisco ATC/Regional Networking Academy John Brandis wrote: HI All, Got a strange problem on a 3524xl switch. Problem: Need to create 2 VLANS . I issue the statements interface vlan 1 ip address 10.64.18.250 255.255.255.0 no shut interface vlan 2 ip address 10.64.19.25 255.255.255.0 no shut However, when I run sh ip interfaces , I see that only interface vlan 1 is up. I go into int vlan 1 and issue a shutdown, then I notice that VLAN 2 interface comes up... Can any one help with this please, or is this just how it works ? John Brandis Network Security Engineer [EMAIL PROTECTED] Phone: +61 2 9278 0629 Helpdesk: +61 2 9278 0486 Level 20, THH 456 Kent St, Sydney ** visit http://www.solution6.com UK Customers - http://www.solution6.co.uk * This email message (and attachments) may contain information that is confidential to Solution 6. If you are not the intended recipient you cannot use, distribute or copy the message or attachments. In such a case, please notify the sender by return email immediately and erase all copies of the message and attachments. Opinions, conclusions and other information in this message and attachments that do not relate to the official business of Solution 6 are neither given nor endorsed by it. * [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=53689t=53682 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
