Upgrade Cisco 2610
Hi Guys, in my site there is a Cisco Router 2610 with the following hardware and software configuration: Cisco Internetwork Operating System Software IOS (tm) C2600 Software (C2600-D-M), Version 12.0(5)T1, RELEASE SOFTWARE (fc1) Copyright (c) 1986-1999 by cisco Systems, Inc. Compiled Tue 17-Aug-99 13:11 by cmong ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) roma uptime is 2 weeks, 5 days, 22 hours, 47 minutes System returned to ROM by power-on at 10:44:34 UTC Fri Jan 7 2000 System image file is "flash:c2600-d-mz.120-5.T1" cisco 2610 (MPC860) processor (revision 0x203) with 20480K/4096K bytes of memory . Processor board ... M860 processor: part number 0, mask 49 Bridging software. X.25 software, Version 3.0.0. Basic Rate ISDN software, Version 1.1. 1 Ethernet/IEEE 802.3 interface(s) 2 Serial(sync/async) network interface(s) 2 Low-speed serial(sync/async) network interface(s) 4 ISDN Basic Rate interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read/Write) Configuration register is 0x2102 The WIC ( 2 Serial Sync/Async) are busy for two sites, i must do a new site with a link at 2 Mbit. The configuration hardware ( 2 Low speed serial), of course, don't support the new link. With this architecture Can I repalce the WIC Low Speed Serial with the other WIC Serial (Sync/Async) at 2 Mbit? Regards, Carmelo _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Upgrade Cisco 2610
Hi Sasa, sorry , I would want to write, if i can replace the WIC Serial (Sync/Async), with speed up to 128kb, with the WIC-2T interface. In conclusion, is it possibile do I have a router with two WIC-2T in slots? Please you answer me . Regards, Carmelo -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Thursday, November 09, 2000 2:14 PM To: carmelo Garofalo Cc: [EMAIL PROTECTED] Subject: Re: Upgrade Cisco 2610 carmelo Garofalo wrote: With this architecture Can I repalce the WIC Low Speed Serial with the other WIC Serial (Sync/Async) at 2 Mbit? There's no WIC sync/async for 2 Mbps. But, WIC-2T (two port, 2 Mbps SYNC serial) with do the job. Sasa _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Upgrade Cisco 2610
Carmelo Garofalo wrote: sorry , I would want to write, if i can replace the WIC Serial (Sync/Async), with speed up to 128kb, with the WIC-2T interface. Yes, but keep in mind that you cannot connect async line to WIC-2T. In conclusion, is it possibile do I have a router with two WIC-2T in slots? Sure. No problems. Saa _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Upgrade Cisco 2610
carmelo Garofalo wrote: With this architecture Can I repalce the WIC Low Speed Serial with the other WIC Serial (Sync/Async) at 2 Mbit? There's no WIC sync/async for 2 Mbps. But, WIC-2T (two port, 2 Mbps SYNC serial) with do the job. Saa _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]