VoIP problem [7:36396]
Hi all I've a problem with a voice router I'm getting DSP timeout errors on the far end (egress) router and I was wondering if anyone has any ideas. See the text below for the error, it appears after the call is disconnected with "normal call clearing", we use E1s. A reboot will make the problem go away for a short while and we using 12.2(4)T on a 3640. The call routing is fine and I can make csim calls from the far end router to my local router and to my phone no problem, in the other direction I get DSP timeouts. Cheers Pat 10w5d: %VTSP-3-DSP_TIMEOUT: DSP timeout on event 0x6: DSP ID=0x1: DSP Disc (call mode=0) 10w5d: %VTSP-3-DSP_TIMEOUT: DSP timeout on event 0x6: DSP ID=0x1: DSP error stats (call mode=1658181684), chnl info(1, 0, 0) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36396&t=36396 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: VoIP problem [7:36396]
Pat- Question: Are both ends identical in Hardware and/or Software?? More importantly, Are both routers running the same version of IOS? I've seen something very similar to this, and it wound up being a compound problem of buggy version of IOS and a mixture of versions from end to end. If you can, you might think about rolling back a little on the version of IOS, to say, 12.2.1, or something like that but verify it won't break some other feature you're depending on first. Another wise action would be to go onto CCO and check their BugTraq to see if they have any known issues with 12.2.4T. Also, here's a tool that might help with the error message: Error message Decoder Ring! It requires CCO access. http://www.cisco.com/cgi-bin/Support/Errordecoder/home.pl Hope this helps! Mark -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Patrick Donlon Sent: Monday, February 25, 2002 11:35 AM To: [EMAIL PROTECTED] Subject: VoIP problem [7:36396] Hi all I've a problem with a voice router I'm getting DSP timeout errors on the far end (egress) router and I was wondering if anyone has any ideas. See the text below for the error, it appears after the call is disconnected with "normal call clearing", we use E1s. A reboot will make the problem go away for a short while and we using 12.2(4)T on a 3640. The call routing is fine and I can make csim calls from the far end router to my local router and to my phone no problem, in the other direction I get DSP timeouts. Cheers Pat 10w5d: %VTSP-3-DSP_TIMEOUT: DSP timeout on event 0x6: DSP ID=0x1: DSP Disc (call mode=0) 10w5d: %VTSP-3-DSP_TIMEOUT: DSP timeout on event 0x6: DSP ID=0x1: DSP error stats (call mode=1658181684), chnl info(1, 0, 0) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36405&t=36396 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VoIP problem [7:36396]
Mark thanks for the post, yep both are identical, I've already decoded the error and it tells me to contact Cisco, which I've done. Cheers ""Mark Odette II"" wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Pat- > Question: Are both ends identical in Hardware and/or Software?? More > importantly, Are both routers running the same version of IOS? I've seen > something very similar to this, and it wound up being a compound problem of > buggy version of IOS and a mixture of versions from end to end. > > If you can, you might think about rolling back a little on the version of > IOS, to say, 12.2.1, or something like that but verify it won't break > some other feature you're depending on first. > > Another wise action would be to go onto CCO and check their BugTraq to see > if they have any known issues with 12.2.4T. > > Also, here's a tool that might help with the error message: Error message > Decoder Ring! It requires CCO access. > http://www.cisco.com/cgi-bin/Support/Errordecoder/home.pl > > Hope this helps! > > Mark > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Patrick Donlon > Sent: Monday, February 25, 2002 11:35 AM > To: [EMAIL PROTECTED] > Subject: VoIP problem [7:36396] > > > Hi all > > I've a problem with a voice router I'm getting DSP timeout errors on the far > end (egress) router and I was wondering if anyone has any ideas. See the > text below for the error, it appears after the call is disconnected with > "normal call clearing", we use E1s. A reboot will make the problem go away > for a short while and we using 12.2(4)T on a 3640. The call routing is fine > and I can make csim calls from the far end router to my local router and to > my phone no problem, in the other direction I get DSP timeouts. > > Cheers > > Pat > > 10w5d: %VTSP-3-DSP_TIMEOUT: DSP timeout on event 0x6: DSP ID=0x1: DSP Disc > (call mode=0) > 10w5d: %VTSP-3-DSP_TIMEOUT: DSP timeout on event 0x6: DSP ID=0x1: DSP error > stats (call mode=1658181684), chnl info(1, 0, 0) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=36620&t=36396 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VoIP problem [7:36396]
a look at TAC error message decoder yields this result: 1. %VTSP-3-DSP_TIMEOUT: DSP timeout on event [dec]: DSP ID=[hex]: [chars] A timeout on the digital signal processor (DSP) response has occurred. Recommended Action: The DSP has been reset automatically. If the problem persists, contact your Cisco technical support representative. Related documents: No specific documents apply to this error message. you need a CCO login to access this, I believe. http://www.cisco.com/cgi-bin/Support/Errordecoder/home.pl Seems to me that 12.2.4 rings a bell in terms of being just plain bad code. Maybe an IOS upgrade ( or downgrade ) ? ""Patrick Donlon"" wrote in message news:[EMAIL PROTECTED].; > Hi all > > I've a problem with a voice router I'm getting DSP timeout errors on the far > end (egress) router and I was wondering if anyone has any ideas. See the > text below for the error, it appears after the call is disconnected with > "normal call clearing", we use E1s. A reboot will make the problem go away > for a short while and we using 12.2(4)T on a 3640. The call routing is fine > and I can make csim calls from the far end router to my local router and to > my phone no problem, in the other direction I get DSP timeouts. > > Cheers > > Pat > > 10w5d: %VTSP-3-DSP_TIMEOUT: DSP timeout on event 0x6: DSP ID=0x1: DSP Disc > (call mode=0) > 10w5d: %VTSP-3-DSP_TIMEOUT: DSP timeout on event 0x6: DSP ID=0x1: DSP error > stats (call mode=1658181684), chnl info(1, 0, 0) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37118&t=36396 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: VoIP problem [7:36396]
Is this a AS5300? If so then check that you have the latest VCWare on your VFCs. This has been a bug for a long time and it might have been addressed in one of the VCWare releases. Tarek -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Chuck Sent: Sunday, March 03, 2002 7:12 PM To: [EMAIL PROTECTED] Subject: Re: VoIP problem [7:36396] a look at TAC error message decoder yields this result: 1. %VTSP-3-DSP_TIMEOUT: DSP timeout on event [dec]: DSP ID=[hex]: [chars] A timeout on the digital signal processor (DSP) response has occurred. Recommended Action: The DSP has been reset automatically. If the problem persists, contact your Cisco technical support representative. Related documents: No specific documents apply to this error message. you need a CCO login to access this, I believe. http://www.cisco.com/cgi-bin/Support/Errordecoder/home.pl Seems to me that 12.2.4 rings a bell in terms of being just plain bad code. Maybe an IOS upgrade ( or downgrade ) ? ""Patrick Donlon"" wrote in message news:[EMAIL PROTECTED].; > Hi all > > I've a problem with a voice router I'm getting DSP timeout errors on the far > end (egress) router and I was wondering if anyone has any ideas. See the > text below for the error, it appears after the call is disconnected with > "normal call clearing", we use E1s. A reboot will make the problem go away > for a short while and we using 12.2(4)T on a 3640. The call routing is fine > and I can make csim calls from the far end router to my local router and to > my phone no problem, in the other direction I get DSP timeouts. > > Cheers > > Pat > > 10w5d: %VTSP-3-DSP_TIMEOUT: DSP timeout on event 0x6: DSP ID=0x1: DSP Disc > (call mode=0) > 10w5d: %VTSP-3-DSP_TIMEOUT: DSP timeout on event 0x6: DSP ID=0x1: DSP error > stats (call mode=1658181684), chnl info(1, 0, 0) Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=37122&t=36396 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]