RE: Weird OSPF result [7:6369]
Vincent Chong wrote: Hi all; I have very interesting question that I want to discuss. I set up an frame-realy Hub and spoke OSPF in my lab environment ( only 1 routing protocol). r1- Hub (Cisco 2501, Enterprise Plus) r2- Spoke (Cisco 2513, Enterprise Plus) r3- Spoke (Cisco 2620, 1S, 1E, 1BRI, IP Plus) r4- Spoke (Cisco 2511 IP Plus) r5- Frame Relay Switch When I was trying to distribute defualt route into OSPF domain by the following command default-information originate always metric 100 metric-type 1 into R2 The expected result is that, other router in the same OSPF domain will have default route, metric 100 and type 1. But I did not have the expected result, only type 2 distribute in other router, try to adjust bandwidth, etc, . When I tried to implement the same configuration but differnet spoke (2 4) the results was expected. Any comment will welcome! PS. All the spokes have similiar setting, except the one implement defualt route ( 2 areas and 1 defualt route) Vincent Chong Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6377t=6369 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Weird OSPF result [7:6369]
Hi all; I have very interesting question that I want to discuss. I set up an frame-realy Hub and spoke OSPF in my lab environment ( only 1 routing protocol). r1- Hub (Cisco 2501, Enterprise Plus) r2- Spoke (Cisco 2513, Enterprise Plus) r3- Spoke (Cisco 2620, 1S, 1E, 1BRI, IP Plus) r4- Spoke (Cisco 2511 IP Plus) r5- Frame Relay Switch When I was trying to distribute defualt route into OSPF domain by the following command default-information originate always metric 100 metric-type 1 into R2 The expected result is that, other router in the same OSPF domain will have default route, metric 100 and type 1. But I did not have the expected result, only type 2 distribute in other router, try to adjust bandwidth, etc, . When I tried to implement the same configuration but differnet spoke (2 4) the results was expected. Any comment will welcome! PS. All the spokes have similiar setting, except the one implement defualt route ( 2 areas and 1 defualt route) Vincent Chong Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=6369t=6369 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
