RE: c4224 problems [7:73517]
D'oh! You're right. I had to recover the password when I first got the switch and I forgot to set the conf reg back to 0x2102. My mistake. Thanks for the help! Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73532&t=73517 -- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
c4224 problems [7:73517]
I know these are discontinued and I would do well not to use them, but The company I work for has 3 of them laying around and they want me to build a test network using them. I've been playing around with one and I can't seem to save the running config?! I've read the software config documents on cisco.com and tried both copy run start and write mem. Both say they are building the config and then [ok]. c4224#copy run start Destination filename [startup-config]? Building configuration... [OK] c4224# (then just for the heck of it): c4224#write mem Building configuration... [OK] c4224# Now if I reload or power cycle the c4224 it doesn't save the config. It just askes me if I want the initial config dialog and the prompt goes back to "gateway". Also, when I create vlans they don't show up in the "show vlan" command. But that's another issue I guess. Any way, has anyone else had problems saving their configs on a c4224? -Bobby Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73517&t=73517 -- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
RE: c4224 problems [7:73517]
I have never seen a c4224, but this sounds like the config register is not set properly (see also password recovery). Thanks, Zsombor Robert Kimble wrote: > > I know these are discontinued and I would do well not to use > them, but > > The company I work for has 3 of them laying around and they > want me to build a test network using them. > > I've been playing around with one and I can't seem to save the > running config?! > > I've read the software config documents on cisco.com and tried > both copy run start and write mem. > > Both say they are building the config and then [ok]. > > c4224#copy run start > Destination filename [startup-config]? > Building configuration... > [OK] > c4224# > > (then just for the heck of it): > > c4224#write mem > Building configuration... > [OK] > c4224# > > Now if I reload or power cycle the c4224 it doesn't save the > config. > > It just askes me if I want the initial config dialog and the > prompt goes back to "gateway". > > Also, when I create vlans they don't show up in the "show vlan" > command. But that's another issue I guess. > > Any way, has anyone else had problems saving their configs on a > c4224? > > -Bobby > > > > > > Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=73529&t=73517 -- **Please support GroupStudy by purchasing from the GroupStudy Store: http://shop.groupstudy.com FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
