Hi All,
Anyone ever had this error before:
session: Unable to tunnel to Router-15 (57)
I've a 6500 with a sup1a-2ge with an msfc. Brand new box and confiured the
switch and router. Rebooted the switch and now I can't session into the msfc
or telnet to the msfc. I can only ping the vlan1 int on the msfc.
thnx's in adv for ur help
rgrds
noel
see below:
sg-6509-2> (enable) telnet 10.44.31.249
Trying 10.44.31.249...
Unable to connect to remote host.
csg-6509-2> (enable) ping 10.44.31.249
10.44.31.249 is alive
csg-6509-2> (enable) ses 15
Trying Router-15...
session: Unable to tunnel to Router-15 (57)
csg-6509-2> (enable)
csg-6509-2> (enable)
csg-6509-2> (enable)
csg-6509-2> (enable)
csg-6509-2> (enable) sh ver
WS-C6509 Software, Version NmpSW: 5.5(6a)
Copyright (c) 1995-2001 by Cisco Systems
NMP S/W compiled on Feb 23 2001, 10:23:18
System Bootstrap Version: 5.3(1)
Hardware Version: 2.0 Model: WS-C6509 Serial #: SCA044403NZ
Mod Port Model Serial #Versions
--- --- ---
--
1 2WS-X6K-SUP1A-2GESAD040304HF Hw : 3.3
Fw : 5.3(1)
Fw1: 5.4(2)
Sw : 5.5(6a)
Sw1: 5.5(6a)
WS-F6K-PFC SAD04270KU4 Hw : 1.1
3 8WS-X6408A-GBIC SAD04450CAX Hw : 1.3
Fw : 5.4(2)
Sw : 5.5(6a)
4 48 WS-X6348-RJ-45 SAL04483PG0 Hw : 1.4
Fw : 5.4(2)
Sw : 5.5(6a)
5 48 WS-X6348-RJ-45 SAL04483PFV Hw : 1.4
Fw : 5.4(2)
Sw : 5.5(6a)
15 1WS-F6K-MSFC SAD04240MUZ Hw : 2.0
Fw : 12.1(2)E,
Sw : 12.1(2)E,
DRAMFLASH NVRAM
Module Total UsedFreeTotal UsedFreeTotal Used Free
-- --- --- --- --- --- --- - - -
1 65408K 37491K 27917K 16384K 13186K 3198K 512K 251K 261K
Uptime is 0 day, 0 hour, 39 minutes
csg-6509-2> (enable)
csg-6509-2> (enable)
csg-6509-2> (enable) sh mod
Mod Slot Ports Module-Type Model Sub Status
--- - - --- ---
1 12 1000BaseX Supervisor WS-X6K-SUP1A-2GEyes ok
15 11 Multilayer Switch Feature WS-F6K-MSFC no ok
3 38 1000BaseX EthernetWS-X6408A-GBIC no ok
4 44810/100BaseTX Ethernet WS-X6348-RJ-45 no ok
5 54810/100BaseTX Ethernet WS-X6348-RJ-45 no ok
Mod Module-Name Serial-Num
--- --- ---
1 SAD040304HF
15 SAD04240MUZ
3 SAD04450CAX
4 SAL04483PG0
5 SAL04483PFV
Mod MAC-Address(es)Hw Fw Sw
--- -- -- --
-
1 00-d0-d3-35-6d-4e to 00-d0-d3-35-6d-4f 3.35.3(1) 5.5(6a)
00-d0-d3-35-6d-4c to 00-d0-d3-35-6d-4d
00-d0-03-2f-a0-00 to 00-d0-03-2f-a3-ff
15 00-30-7b-97-9d-20 to 00-30-7b-97-9d-5f 2.012.1(2)E, 12.1(2)E,
3 00-02-7e-f4-9d-48 to 00-02-7e-f4-9d-4f 1.35.4(2) 5.5(6a)
4 00-03-6c-14-d5-d0 to 00-03-6c-14-d5-ff 1.45.4(2) 5.5(6a)
5 00-04-28-62-35-20 to 00-04-28-62-35-4f 1.45.4(2) 5.5(6a)
Mod Sub-TypeSub-Model Sub-Serial Sub-Hw
--- --- --- --- --
1 L3 Switching Engine WS-F6K-PFC SAD04270KU4 1.1
csg-6509-2> (enable)
csg-6509-2> (enable)
csg-6509-2> (enable) sh test
Diagnostic mode: minimal (mode at next reset: minimal)
Environmental Status (. = Pass, F = Fail, U = Unknown, N = Not Present)
PS1: F PS2: . PS1 Fan: F PS2 Fan: .
Chassis-Ser-EEPROM: . Fan: .
Clock(A/B): A Clock A: . Clock B: .
VTT1: .VTT2: .VTT3: .
Module 1 : 2-port 1000BaseX Supervisor
Network Management Processor (NMP) Status: (. = Pass, F = Fail, U = Unknown)
ROM: . Flash-EEPROM: . Ser-EEPROM: . NVRAM: . EOBC Comm: .
Line Card Status for Module 1 : PASS
Port Status :
Ports 1 2
---
. .
Line Card Diag Status for Module 1 (. = Pass, F = Fail, N = N/A)
Module 1
Earl V Status :
NewLearnTest: .
IndexLearnTest: .
DontForwardTest: .
DontLearnTest:.
ConditionalLearnTest: .
BadBpduTest: .
TrapTest: .
MatchTest:.
SpanTest:
