Re: [c-nsp] Cisco 7200 NPE-G2 Strange Problem

[Shoaib Farhan]

*Arie*

SHOW IDB command given below

Router 1

Maximum number of Software IDBs 20050.  In use 956.

   HWIDBs SWIDBs
Active 20443
Inactive8513
Total IDBs 28956
Size each (bytes)2888   1432
Total bytes 808641368992

Router 2

Maximum number of Software IDBs 20050.  In use 497.

   HWIDBs SWIDBs
Active 20402
Inactive8 95
Total IDBs 28497
Size each (bytes)2888   1432
Total bytes 80864 711704


Router 3

Maximum number of Software IDBs 20050.  In use 537.

   HWIDBs SWIDBs
Active 18463
Inactive4 74
Total IDBs 22537
Size each (bytes)3176   1192
Total bytes 69872 640104


Juergen

we haven't tested with those IOS.




On Thu, Feb 4, 2016 at 2:55 PM, Juergen Marenda <c...@marenda.net> wrote:

> Also on sp-services or ...SRE...train ?
>
> -Ursprüngliche Nachricht-
> Von: cisco-nsp [mailto:cisco-nsp-boun...@puck.nether.net] Im Auftrag von
> Shoaib Farhan
> Gesendet: Donnerstag, 4. Februar 2016 06:10
> An: cisco-nsp@puck.nether.net
> Betreff: [c-nsp] Cisco 7200 NPE-G2 Strange Problem
>
> Hey Guys,
>
> We have 3 Cisco 7200 NPE-G2 Routers with 3 built-in GigabitEthernet Ports.
> One Interface (Gi0/3) is  in Trunk Mode with 300 Sub-interfaces. And Other
> 2 Ports are used as WAN ports.
>
> Whenever we create New Subinterface or change the primary IP of a
> sub-interface or Gi0/2 port became down the GigabitEthernet 0/1 Port became
> hang. Gi0/1 physically UP, line protocol is up, but no ping response on
> that
> link, even OSPF was showing UP on that interface. After shut/no shut the
> GI0/1 interface it works normally.
>
> We have change the SFP module and checked the fiber link multiple times but
> found no problem.
>
> Here are some Technical Info that might help:
>
> *IOS*
>
> 2 Router with c7200p-advipservicesk9-mz.124-24.T4.bin
> 1 has c7200p-advipservicesk9-mz.150-1.M3.bin
>
> *Memory*
> 2 has 2GB
> 1 has 1 GB
>
> Show controller command output given in attachment.
>
> If any other Information require please don't hesitate to ask.
>
>
>
>
> --
>
> Regards,
>
> Md. Shoaib Farhan
> <http://www.telnet.com.bd>
> ___
> cisco-nsp mailing list  cisco-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>


-- 

Regards,

Md. Shoaib Farhan
<http://www.telnet.com.bd>
___
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

Re: [c-nsp] Cisco 7200 NPE-G2 Strange Problem

[Arie Vayner]

This doesn't sound right to me, but does feel very similar to something
that reminds me an IDB exhaustion...
This is very outdated
,
but your IOS is also quite old... I would check this one with TAC...

HTH
Arie


On Wed, Feb 3, 2016 at 9:10 PM Shoaib Farhan 
wrote:

> Hey Guys,
>
> We have 3 Cisco 7200 NPE-G2 Routers with 3 built-in GigabitEthernet Ports.
> One Interface (Gi0/3) is  in Trunk Mode with 300 Sub-interfaces. And Other
> 2 Ports are used as WAN ports.
>
> Whenever we create New Subinterface or change the primary IP of a
> sub-interface or Gi0/2 port became down the GigabitEthernet 0/1 Port
> became  hang. Gi0/1 physically UP, line protocol is up, but no ping
> response on that link, even OSPF was showing UP on that interface. After
> shut/no shut the GI0/1 interface it works normally.
>
> We have change the SFP module and checked the fiber link multiple times but
> found no problem.
>
> Here are some Technical Info that might help:
>
> *IOS*
>
> 2 Router with c7200p-advipservicesk9-mz.124-24.T4.bin
> 1 has c7200p-advipservicesk9-mz.150-1.M3.bin
>
> *Memory*
> 2 has 2GB
> 1 has 1 GB
>
> Show controller command output given in attachment.
>
> If any other Information require please don't hesitate to ask.
>
>
>
>
> --
>
> Regards,
>
> Md. Shoaib Farhan
> 
> ___
> cisco-nsp mailing list  cisco-nsp@puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
___
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

[c-nsp] Cisco 7200 NPE-G2 Strange Problem

[Shoaib Farhan]

Hey Guys,

We have 3 Cisco 7200 NPE-G2 Routers with 3 built-in GigabitEthernet Ports.
One Interface (Gi0/3) is  in Trunk Mode with 300 Sub-interfaces. And Other
2 Ports are used as WAN ports.

Whenever we create New Subinterface or change the primary IP of a
sub-interface or Gi0/2 port became down the GigabitEthernet 0/1 Port
became  hang. Gi0/1 physically UP, line protocol is up, but no ping
response on that link, even OSPF was showing UP on that interface. After
shut/no shut the GI0/1 interface it works normally.

We have change the SFP module and checked the fiber link multiple times but
found no problem.

Here are some Technical Info that might help:

*IOS*

2 Router with c7200p-advipservicesk9-mz.124-24.T4.bin
1 has c7200p-advipservicesk9-mz.150-1.M3.bin

*Memory*
2 has 2GB
1 has 1 GB

Show controller command output given in attachment.

If any other Information require please don't hesitate to ask.




-- 

Regards,

Md. Shoaib Farhan

___
cisco-nsp mailing list  cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/