[c-nsp] WS-X6148-RJ-21 performance check
Hi all, how I can check if a C6513/WS-X6148-RJ-21 module reached the maximum forward capacity (in this case 15 Mpps) ? Best regards, Diogo -- ./diogo -montagner ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] WS-X6148-RJ-21 performance check
Hi Diogo, On Thu, 2008-03-13 at 10:59 -0300, Diogo Montagner wrote: how I can check if a C6513/WS-X6148-RJ-21 module reached the maximum forward capacity (in this case 15 Mpps) ? You can check the forwarding engine load with show platform hardware capacity forwarding, it shows up at the bottom. The 15 mpps are for the whole system, not per card. The show mls statistics gives you some information too, including the current forwarding rate. If you're using a fabric enabled supervisor, the show platform hardware capacity fabric can also give you some information, though not about bus-cards like the 6100-series. Regards, Peter ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] WS-X6148-RJ-21 performance check
Since, the 6148 linecard does not have a DFC, and relies on central forwarding from the EARL on the sup, you could check the current forwarding rates of the Central EARL using either: sup-720#show mls statistics Statistics for Earl in Module 6 L2 Forwarding Engine Total packets Switched: 85667923 --- L3 Forwarding Engine Total packets L3 Switched : 77712372 @ 20 pps or 2-13-mid-720#show platform hardware capacity forwarding snip Forwarding engine load: Module pps peak-pps peak-time 5 20 2882 23:35:31 UTC Sun Nov 30 2008 6 22 2791 23:35:17 UTC Sun Nov 30 2008 sukumar -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Diogo Montagner Sent: Thursday, March 13, 2008 7:00 AM To: cisco-nsp@puck.nether.net Subject: [c-nsp] WS-X6148-RJ-21 performance check Hi all, how I can check if a C6513/WS-X6148-RJ-21 module reached the maximum forward capacity (in this case 15 Mpps) ? Best regards, Diogo -- ./diogo -montagner ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
Re: [c-nsp] WS-X6148-RJ-21 performance check
Thanks for all replies. Diogo On Thu, Mar 13, 2008 at 2:32 PM, Sukumar Subburayan (sukumars) [EMAIL PROTECTED] wrote: Since, the 6148 linecard does not have a DFC, and relies on central forwarding from the EARL on the sup, you could check the current forwarding rates of the Central EARL using either: sup-720#show mls statistics Statistics for Earl in Module 6 L2 Forwarding Engine Total packets Switched: 85667923 --- L3 Forwarding Engine Total packets L3 Switched : 77712372 @ 20 pps or 2-13-mid-720#show platform hardware capacity forwarding snip Forwarding engine load: Module pps peak-pps peak-time 5 20 2882 23:35:31 UTC Sun Nov 30 2008 6 22 2791 23:35:17 UTC Sun Nov 30 2008 sukumar -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Diogo Montagner Sent: Thursday, March 13, 2008 7:00 AM To: cisco-nsp@puck.nether.net Subject: [c-nsp] WS-X6148-RJ-21 performance check Hi all, how I can check if a C6513/WS-X6148-RJ-21 module reached the maximum forward capacity (in this case 15 Mpps) ? Best regards, Diogo -- ./diogo -montagner ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/ -- ./diogo -montagner ___ cisco-nsp mailing list cisco-nsp@puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp archive at http://puck.nether.net/pipermail/cisco-nsp/
