Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

2012-07-27 Thread Russ & Melody 

Hi Rich,

Thanks for having a look.
So now I see, the 5 step will allow the bottom step to be well below 
the surface. Good thing.


I had to get my head around the Binnacle site images... the detail 
ones are upside down!


Cheers, Russ
Sweet 35 mk-1

At 12:09 PM 27/07/2012, you wrote:

Also:  I'd get the 5 step unit for any boat over 27 ft or so. Easier to use.

Rich
(mobile)

On 2012-07-27, at 15:45, Russ & Melody 
<russ...@telus.net> wrote:


Hi Rich,

You might want to have a look at the 4 step model too. It may be 
more appropriate for Danny's boat (size = 33').


Cheers, Russ
Sweet 35 mk-1
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List Pulpit wanted for 35mk III

2012-07-27 Thread Morgenstern, Keith E CIV SEA 08 NR 
I think that "Tops in Quality" made the original.  They are still in
business, and I bet they still have the figures/specs.

Even if they don't have the original specs figures, they have a pretty
good measurement form to make a custom one.

I had them make a rear pulpit for an older boat I had (it never had one
before), and it came out perfectly and fit correctly.

They shipped it by truck.

-Keith Morgenstern


-Original Message-
From: Indigo [mailto:ind...@thethomsons.us] 
Sent: Thursday, July 26, 2012 15:11
To: cnc-list@cnc-list.com
Subject: Stus-List Pulpit wanted for 35mk III

Long story but two nights ago a boat in Dering Harbor broke loose and
smashed into my pulpit. Does anyone know where I can get a replacement ?
Does South Shore (is that the correct name) have them?

I am sure that others have been through this before. Is there any chance
of structural hull damage from such an accident? None is visible from
the outside

The collision also caused some deep ish scratches through the already
old awl grip. Any thoughts in what I could reasonably ask the insurance
co (his or Shelter Island Yacht Club) to pay for (a new awl grip job
would be wonderful but I think unlikely!)

--
Jonathan
indigo 35mk III enroute home to Southport


___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List Android as chart plotter

2012-07-27 Thread jtsails 
Steve,
I played with the old version of the navionics app on my droid phone. It didn't 
have all the features that you would need to use it exclusively instead of a 
"real" gps. It was also a little buggy and locked up occasionally. The 
discontinued that version (and orphaned the users) when they came out with the 
new version. The new one is suppose to be a big improvement, but I haven't 
messed with it. BTW, I use my Garmin 76cx exclusively on my boat, and actually 
preferred it to the big RAymarine unit that was on my recent charter in St. 
Martin. Down there, I used the big Raymarine as a chart and did all of my 
course plotting and navigating on the little Garmin. Part of that preference is 
probably just that I am familiar with the Garmin and have never messed with the 
Raymarine units very much.
James
S/V Delaney
C&C 38 Mk 11
  - Original Message - 
  From: Stevan Plavsa 
  To: cnc-list@cnc-list.com 
  Sent: Friday, July 27, 2012 3:42 PM
  Subject: Stus-List Android as chart plotter


  Hi All. The google nexus 7 is out and it has built in GPS that does not rely 
on any cellular data (Google Nexus does not have any cellular hardware, it's 
wifi only). It runs the latest version of Android. There are several marine 
navigation apps, none that I have any experience with. I was wondering if any 
listers have used other Android tablets as chartplotter substitutes and what 
your experiences were like? The Google Nexus is $209 for the 8GB and $259 for 
the 16GB (at least those are the prices up here in Canada).
  I'm tempted to get one but I just bought a Garmin handheld, the 76cx. I'm 
disappointed in it because it feels like ancient history compared to my iPhone 
but I needed a "real" GPS unit.


  Steve
  C&C 32 Sea Swan
  Toronto


--


  ___
  This List is provided by the C&C Photo Album
  http://www.cncphotoalbum.com
  CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List Whale bilge pump model on C&C 24s?

2012-07-27 Thread Ed Dooley 
Thanks guys,
I don¹t mind the rowing (I need the exercise), it¹s the lightning and rain
forecast.  :-)
Ed




> From: Joel Aronson 
> I'd guess a Gusher 10. My boat is also an 83 and has 2 of them. They are easy
> to rebuild.   Just be sure its returnable if unopened!
> Joel 
> 35/3
> 
> On Fri, Jul 27, 2012 at 3:18 PM, Rich Knowles  wrote:
>> Start rowing, Ed. could be one of many. 
>> Rich 
>> (mobile)
>> 
>> 
>> From: Andrew Frame 
> I have a '76 and it doesn't have one.
> 
> 
> 
> On 07/27/2012 03:14 PM, Ed Dooley wrote:
>>> >> I know most on the list have bigger boats, but...
>>> >> anybody happen to know what model of Whale bilge pump came standard on a
>>> C&C24
>>> >> (if there even was a standard model used)?
>>> >> Mine¹s a 1983 and the pump diaphram ripped. I¹d like to order one without
>>> >> having to drive to then row out to the boat in the rain.
>>> >> Thanks,
>>> >> Ed

___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List CnC-List Digest, Vol 78, Issue 49

2012-07-27 Thread Ed Dooley 



On 7/27/12 3:42 PM, "cnc-list-requ...@cnc-list.com"
 wrote:

> Send CnC-List mailing list submissions to
>  cnc-list@cnc-list.com
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>  http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
> or, via email, send a message with subject or body 'help' to
>  cnc-list-requ...@cnc-list.com
> 
> You can reach the person managing the list at
>  cnc-list-ow...@cnc-list.com
> 
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of CnC-List digest..."
> 
> Today's Topics:
> 
>1. Re:  TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS  STEEL
>   (Rich Knowles)
>2. Re:  TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
>   (Joel Aronson)
>3. Re:  TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS  STEEL
>   (djhaug...@juno.com)
>4.  Whale bige pump model on C&C 24s? (Ed Dooley)
>5. Re:  TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS  STEEL
>   (Rich Knowles)
>6. Re:  Whale bige pump model on C&C 24s? (Rich Knowles)
>7. Re:  Whale bige pump model on C&C 24s? (Joel Aronson)
>8. Re:  TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS  STEEL
>   (djhaug...@juno.com)
>9. Re:  Whale bige pump model on C&C 24s? (Andrew Frame)
>   10. Re:  TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS  STEEL
>   (Rich Knowles)
>   11.  Android as chart plotter (Stevan Plavsa)
> 
> ___
> CnC-List mailing list
> CnC-List@cnc-list.com
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com

___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

2012-07-27 Thread Rich Knowles 
Welcome. Any time. 

Rich 
(mobile)

On 2012-07-27, at 19:20, "djhaug...@juno.com"  wrote:

I just ordered it!
Rich that was very gracious of you!!  I'm much obliged!
 
Danny.


-- Original Message --
From: Rich Knowles 
To: "cnc-list@cnc-list.com" 
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS  STEEL
Date: Fri, 27 Jul 2012 16:17:20 -0300

I've installed a few of them. No complaints. 7/8" Diameter.  For real comfort 
I'd also get or make some teak or plastic treads for them. The tubing is hard 
on the feet. 

Rich 
(mobile)

On 2012-07-27, at 19:12, "djhaug...@juno.com"  wrote:

 
Thats awesome!!!
 
 
So it is Rich Knowles recommended?  AND its 316 stainless??  What is the 
diameter of the tubiing


-- Original Message --
From: Rich Knowles 
To: "cnc-list@cnc-list.com" 
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS  STEEL
Date: Fri, 27 Jul 2012 16:09:23 -0300

 

Also:  I'd get the 5 step unit for any boat over 27 ft or so. Easier to use. 

Rich 
(mobile)

On 2012-07-27, at 15:45, Russ & Melody  wrote:

 
Hi Rich,
 
You might want to have a look at the 4 step model too. It may be more 
appropriate for Danny's boat (size = 33'). 

Cheers, Russ
Sweet 35 mk-1

At 11:39 AM 27/07/2012, you wrote:
It's a three minute drive. No sweat. 

Rich 
(mobile)

On 2012-07-27, at 18:23, "djhaug...@juno.com"  wrote:

Thats great Rich!  Thanks!
You, maybe, should call first to make sure they have one in stock...?


-- Original Message --
From: "Rich Knowles" 
To: 
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
Date: Fri, 27 Jul 2012 15:15:40 -0300

Will do. I’ll email you in an hour or so.

 

From: cnc-list-boun...@cnc-list.com [ mailto:cnc-list-boun...@cnc-list.com] On 
Behalf Of djhaug...@juno.com
Sent: Friday, July 27, 2012 3:07 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

 

really??

That would be way cool!!!

 

Danny



-- Original Message --
From: "Rich Knowles" 
To: 
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
Date: Fri, 27 Jul 2012 15:05:08 -0300

If you need me to, I can drop into the store and have a look for you.

 

Rich Knowles

Indigo LF38

Halifax, Nova Scotia

 

 

 

From: cnc-list-boun...@cnc-list.com [ mailto:cnc-list-boun...@cnc-list.com] On 
Behalf Of djhaug...@juno.com
Sent: Friday, July 27, 2012 12:05 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

 

yea...it looks like a mis print, but thats a good point.  The standoffs seem to 
be able to move...I'll ask them

-- Original Message --
From: Joel Aronson 
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
Date: Fri, 27 Jul 2012 10:38:46 -0400

Danny,

 

Can the stand-offs be moved? �It seems to me that they should be lower than 
pictured, otherwise the ladder is going to bend. �I don't know about the 
grade of stainless.

 

Joel

On Fri, Jul 27, 2012 at 10:27 AM, djhaug...@juno.com  wrote:

I'm about to order this ladder. �Do any of you have any comments about it?

http://us.binnacle.com/p5308/TRANSOM-LADDER-FOR-SAILBOAT-5-STEP-STAINLESS-STEEL/product_info.html#description
 

Danny


___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com 
CnC-List@cnc-list.com



 

-- 
Joel 
301 541 8551
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com 
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List Whale bige pump model on C&C 24s?

2012-07-27 Thread Andrew Frame 
I have a '76 and it doesn't have one.



On 07/27/2012 03:14 PM, Ed Dooley wrote:
>> I know most on the list have bigger boats, but...
>> anybody happen to know what model of Whale bilge pump came standard on a 
>> C&C24
>> (if there even was a standard model used)?
>> Mine¹s a 1983 and the pump diaphram ripped. I¹d like to order one without
>> having to drive to then row out to the boat in the rain.
>> Thanks,
>> Ed
> 
> 
> 
> 
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
> 

___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

2012-07-27 Thread djhaug...@juno.com 
I just ordered it!Rich that was very gracious of you!!  I'm much obliged! Danny.

-- Original Message --
From: Rich Knowles 
To: "cnc-list@cnc-list.com" 
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS  STEEL
Date: Fri, 27 Jul 2012 16:17:20 -0300


I've installed a few of them. No complaints. 7/8" Diameter.  For real comfort 
I'd also get or make some teak or plastic treads for them. The tubing is hard 
on the feet. 

Rich (mobile)
On 2012-07-27, at 19:12, "djhaug...@juno.com"  wrote:

 Thats awesome!!!  So it is Rich Knowles recommended?  AND its 316 stainless??  
What is the diameter of the tubiing

-- Original Message --
From: Rich Knowles 
To: "cnc-list@cnc-list.com" 
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS  STEEL
Date: Fri, 27 Jul 2012 16:09:23 -0300

 
Also:  I'd get the 5 step unit for any boat over 27 ft or so. Easier to use. 

Rich (mobile)
On 2012-07-27, at 15:45, Russ & Melody  wrote:

 Hi Rich,
  
 You might want to have a look at the 4 step model too. It may be more 
appropriate for Danny's boat (size = 33'). 

 Cheers, Russ
 Sweet 35 mk-1

 At 11:39 AM 27/07/2012, you wrote:
It's a three minute drive. No sweat. 

 Rich 
 (mobile)

 On 2012-07-27, at 18:23, "djhaug...@juno.com"  wrote:

 Thats great Rich!  Thanks!
 You, maybe, should call first to make sure they have one in stock...?

 
 -- Original Message --
 From: "Rich Knowles" 
 To: 
 Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
 Date: Fri, 27 Jul 2012 15:15:40 -0300

 Will do. I’ll email you in an hour or so.

  

 From:  cnc-list-boun...@cnc-list.com [ mailto:cnc-list-boun...@cnc-list.com] 
On Behalf Of djhaug...@juno.com
 Sent: Friday, July 27, 2012 3:07 PM
 To: cnc-list@cnc-list.com
 Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

  

 really??

 That would be way cool!!!

  

 Danny

 

 -- Original Message --
 From: "Rich Knowles" 
 To: 
 Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
 Date: Fri, 27 Jul 2012 15:05:08 -0300

 If you need me to, I can drop into the store and have a look for you.

  

 Rich Knowles

 Indigo LF38

 Halifax, Nova Scotia

  

  

  

 From:  cnc-list-boun...@cnc-list.com [ mailto:cnc-list-boun...@cnc-list.com] 
On Behalf Of djhaug...@juno.com
 Sent: Friday, July 27, 2012 12:05 PM
 To: cnc-list@cnc-list.com
 Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

  

 yea...it looks like a mis print, but thats a good point.  The standoffs seem 
to be able to move...I'll ask them

 -- Original Message --
 From: Joel Aronson 
 To: cnc-list@cnc-list.com
 Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
 Date: Fri, 27 Jul 2012 10:38:46 -0400

 Danny,

  

 Can the stand-offs be moved? �It seems to me that they should be lower than 
pictured, otherwise the ladder is going to bend. �I don't know about the 
grade of stainless.

  

 Joel

 On Fri, Jul 27, 2012 at 10:27 AM, djhaug...@juno.com  
wrote:

I'm about to order this ladder. �Do any of you have any comments about it?

 
http://us.binnacle.com/p5308/TRANSOM-LADDER-FOR-SAILBOAT-5-STEP-STAINLESS-STEEL/product_info.html#description
 

Danny


 ___
 This List is provided by the C&C Photo Album
 http://www.cncphotoalbum.com 
 CnC-List@cnc-list.com

 

  

 -- 
 Joel 
 301 541 8551
 ___
 This List is provided by the C&C Photo Album
 http://www.cncphotoalbum.com 
 CnC-List@cnc-list.com
 ___
 This List is provided by the C&C Photo Album
  http://www.cncphotoalbum.com
 CnC-List@cnc-list.com___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List Whale bige pump model on C&C 24s?

2012-07-27 Thread Joel Aronson 
I'd guess a Gusher 10. My boat is also an 83 and has 2 of them. They are
easy to rebuild.   Just be sure its returnable if unopened!

Joel
35/3

On Fri, Jul 27, 2012 at 3:18 PM, Rich Knowles  wrote:

> Start rowing, Ed. could be one of many.
>
> Rich
> (mobile)
>
> On 2012-07-27, at 16:14, Ed Dooley  wrote:
>
> I know most on the list have bigger boats, but...
> anybody happen to know what model of Whale bilge pump came standard on a
> C&C24 (if there even was a standard model used)?
> Mine’s a 1983 and the pump diaphram ripped. I’d like to order one without
> having to drive to then row out to the boat in the rain.
> Thanks,
> Ed
>
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>
>


-- 
Joel
301 541 8551
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List Whale bige pump model on C&C 24s?

2012-07-27 Thread Rich Knowles 
Start rowing, Ed. could be one of many. 

Rich 
(mobile)

On 2012-07-27, at 16:14, Ed Dooley  wrote:

I know most on the list have bigger boats, but...
anybody happen to know what model of Whale bilge pump came standard on a C&C24 
(if there even was a standard model used)?
Mine’s a 1983 and the pump diaphram ripped. I’d like to order one without 
having to drive to then row out to the boat in the rain.
Thanks,
Ed
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

2012-07-27 Thread Rich Knowles 
I've installed a few of them. No complaints. 7/8" Diameter.  For real comfort 
I'd also get or make some teak or plastic treads for them. The tubing is hard 
on the feet. 

Rich 
(mobile)

On 2012-07-27, at 19:12, "djhaug...@juno.com"  wrote:

Thats awesome!!!
 
 
So it is Rich Knowles recommended?  AND its 316 stainless??  What is the 
diameter of the tubiing


-- Original Message --
From: Rich Knowles 
To: "cnc-list@cnc-list.com" 
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS  STEEL
Date: Fri, 27 Jul 2012 16:09:23 -0300

Also:  I'd get the 5 step unit for any boat over 27 ft or so. Easier to use. 

Rich 
(mobile)

On 2012-07-27, at 15:45, Russ & Melody  wrote:

 
Hi Rich,
 
You might want to have a look at the 4 step model too. It may be more 
appropriate for Danny's boat (size = 33'). 

Cheers, Russ
Sweet 35 mk-1

At 11:39 AM 27/07/2012, you wrote:
It's a three minute drive. No sweat. 

Rich 
(mobile)

On 2012-07-27, at 18:23, "djhaug...@juno.com"  wrote:

Thats great Rich!  Thanks!
You, maybe, should call first to make sure they have one in stock...?


-- Original Message --
From: "Rich Knowles" 
To: 
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
Date: Fri, 27 Jul 2012 15:15:40 -0300

Will do. I’ll email you in an hour or so.

 

From: cnc-list-boun...@cnc-list.com [ mailto:cnc-list-boun...@cnc-list.com] On 
Behalf Of djhaug...@juno.com
Sent: Friday, July 27, 2012 3:07 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

 

really??

That would be way cool!!!

 

Danny



-- Original Message --
From: "Rich Knowles" 
To: 
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
Date: Fri, 27 Jul 2012 15:05:08 -0300

If you need me to, I can drop into the store and have a look for you.

 

Rich Knowles

Indigo LF38

Halifax, Nova Scotia

 

 

 

From: cnc-list-boun...@cnc-list.com [ mailto:cnc-list-boun...@cnc-list.com] On 
Behalf Of djhaug...@juno.com
Sent: Friday, July 27, 2012 12:05 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

 

yea...it looks like a mis print, but thats a good point.  The standoffs seem to 
be able to move...I'll ask them

-- Original Message --
From: Joel Aronson 
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
Date: Fri, 27 Jul 2012 10:38:46 -0400

Danny,

 

Can the stand-offs be moved? �It seems to me that they should be lower than 
pictured, otherwise the ladder is going to bend. �I don't know about the 
grade of stainless.

 

Joel

On Fri, Jul 27, 2012 at 10:27 AM, djhaug...@juno.com  wrote:

I'm about to order this ladder. �Do any of you have any comments about it?

http://us.binnacle.com/p5308/TRANSOM-LADDER-FOR-SAILBOAT-5-STEP-STAINLESS-STEEL/product_info.html#description
 

Danny


___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com 
CnC-List@cnc-list.com



 

-- 
Joel 
301 541 8551
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com 
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Stus-List Whale bige pump model on C&C 24s?

2012-07-27 Thread Ed Dooley 
> I know most on the list have bigger boats, but...
> anybody happen to know what model of Whale bilge pump came standard on a C&C24
> (if there even was a standard model used)?
> Mine¹s a 1983 and the pump diaphram ripped. I¹d like to order one without
> having to drive to then row out to the boat in the rain.
> Thanks,
> Ed

___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

2012-07-27 Thread djhaug...@juno.com 
Thats awesome!!!  So it is Rich Knowles recommended?  AND its 316 stainless??  
What is the diameter of the tubiing

-- Original Message --
From: Rich Knowles 
To: "cnc-list@cnc-list.com" 
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS  STEEL
Date: Fri, 27 Jul 2012 16:09:23 -0300


Also:  I'd get the 5 step unit for any boat over 27 ft or so. Easier to use. 

Rich (mobile)
On 2012-07-27, at 15:45, Russ & Melody  wrote:

 Hi Rich,
  
 You might want to have a look at the 4 step model too. It may be more 
appropriate for Danny's boat (size = 33'). 

 Cheers, Russ
 Sweet 35 mk-1

 At 11:39 AM 27/07/2012, you wrote:
It's a three minute drive. No sweat. 

 Rich 
 (mobile)

 On 2012-07-27, at 18:23, "djhaug...@juno.com"  wrote:

 Thats great Rich!  Thanks!
 You, maybe, should call first to make sure they have one in stock...?

 
 -- Original Message --
 From: "Rich Knowles" 
 To: 
 Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
 Date: Fri, 27 Jul 2012 15:15:40 -0300

 Will do. I’ll email you in an hour or so.

  

 From:  cnc-list-boun...@cnc-list.com [ mailto:cnc-list-boun...@cnc-list.com] 
On Behalf Of djhaug...@juno.com
 Sent: Friday, July 27, 2012 3:07 PM
 To: cnc-list@cnc-list.com
 Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

  

 really??

 That would be way cool!!!

  

 Danny

 

 -- Original Message --
 From: "Rich Knowles" 
 To: 
 Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
 Date: Fri, 27 Jul 2012 15:05:08 -0300

 If you need me to, I can drop into the store and have a look for you.

  

 Rich Knowles

 Indigo LF38

 Halifax, Nova Scotia

  

  

  

 From:  cnc-list-boun...@cnc-list.com [ mailto:cnc-list-boun...@cnc-list.com] 
On Behalf Of djhaug...@juno.com
 Sent: Friday, July 27, 2012 12:05 PM
 To: cnc-list@cnc-list.com
 Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

  

 yea...it looks like a mis print, but thats a good point.  The standoffs seem 
to be able to move...I'll ask them

 -- Original Message --
 From: Joel Aronson 
 To: cnc-list@cnc-list.com
 Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
 Date: Fri, 27 Jul 2012 10:38:46 -0400

 Danny,

  

 Can the stand-offs be moved? �It seems to me that they should be lower than 
pictured, otherwise the ladder is going to bend. �I don't know about the 
grade of stainless.

  

 Joel

 On Fri, Jul 27, 2012 at 10:27 AM, djhaug...@juno.com  
wrote:

I'm about to order this ladder. �Do any of you have any comments about it?

  
http://us.binnacle.com/p5308/TRANSOM-LADDER-FOR-SAILBOAT-5-STEP-STAINLESS-STEEL/product_info.html#description
 

Danny


 ___
 This List is provided by the C&C Photo Album
 http://www.cncphotoalbum.com 
 CnC-List@cnc-list.com

 

  

 -- 
 Joel 
 301 541 8551
 ___
 This List is provided by the C&C Photo Album
 http://www.cncphotoalbum.com 
 CnC-List@cnc-list.com
 ___
 This List is provided by the C&C Photo Album
  http://www.cncphotoalbum.com
 CnC-List@cnc-list.com___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

2012-07-27 Thread Joel Aronson 
For what its worth, my 35/3 has a 4 step.  The bottom 2 are below the
transom, but it is a big step up from the the top step onto the boat.

Joel
35/3

On Fri, Jul 27, 2012 at 3:08 PM, Rich Knowles  wrote:

> I'm looking at the ladders as I write. They are made of very sturdy 316
> stainless steel and the stand off legs are completely adjustable between
> the rungs. I think you would have to work very hard to bend them at all  On
> the 5 step model the legs can be set anywhere fin 8" to 17" below the
> pivot. On the 4 step unit, they can be anywhere from 5-14 " below the pivot
> point. Both have the mounting pads 11" apart.  The 5 step unit's bottom
> step is 48" below the pivot point and the 4 step is 35".
>
> I'll stand by a bit. Lemme know if you needier info.
>
> Rich
> (mobile)
>
> On 2012-07-27, at 15:45, Russ & Melody  wrote:
>
> Hi Rich,
>
> You might want to have a look at the 4 step model too. It may be more
> appropriate for Danny's boat (size = 33').
>
> ****Cheers, Russ
> *****Sweet *35 mk-1
>
> At 11:39 AM 27/07/2012, you wrote:
>
> It's a three minute drive. No sweat.
>
> Rich
> (mobile)
>
> On 2012-07-27, at 18:23, "djhaug...@juno.com"  wrote:
>
> Thats great Rich!  Thanks!
> You, maybe, should call first to make sure they have one in stock...?
>
>
> -- Original Message --
> From: "Rich Knowles" 
> To: 
> Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
> Date: Fri, 27 Jul 2012 15:15:40 -0300
>
> Will do. I’ll email you in an hour or so.
>
>
>
> *From:* cnc-list-boun...@cnc-list.com 
> [mailto:cnc-list-boun...@cnc-list.com]
> *On Behalf Of *djhaug...@juno.com
> *Sent:* Friday, July 27, 2012 3:07 PM
> *To:* cnc-list@cnc-list.com
> *Subject:* Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS
> STEEL
>
>
>
> really??
>
> That would be way cool!!!
>
>
>
> Danny
>
>
>
> -- Original Message --
> From: "Rich Knowles" 
> To: 
> Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
> Date: Fri, 27 Jul 2012 15:05:08 -0300
>
> If you need me to, I can drop into the store and have a look for you.
>
>
>
> Rich Knowles
>
> Indigo LF38
>
> Halifax, Nova Scotia
>
>
>
>
>
>
>
> *From:* cnc-list-boun...@cnc-list.com 
> [mailto:cnc-list-boun...@cnc-list.com]
> *On Behalf Of *djhaug...@juno.com
> *Sent:* Friday, July 27, 2012 12:05 PM
> *To:* cnc-list@cnc-list.com
> *Subject:* Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS
> STEEL
>
>
>
> yea...it looks like a mis print, but thats a good point.  The standoffs
> seem to be able to move...I'll ask them
>
> -- Original Message --
> From: Joel Aronson 
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
> Date: Fri, 27 Jul 2012 10:38:46 -0400
>
> Danny,
>
>
>
> Can the stand-offs be moved? �It seems to me that they should be lower
> than pictured, otherwise the ladder is going to bend. �I don't know about
> the grade of stainless.
>
>
>
> Joel
>
> On Fri, Jul 27, 2012 at 10:27 AM, djhaug...@juno.com 
> wrote:
>
> I'm about to order this ladder. �Do any of you have any comments about
> it?
>
>
>
> http://us.binnacle.com/p5308/TRANSOM-LADDER-FOR-SAILBOAT-5-STEP-STAINLESS-STEEL/product_info.html#description
>
> Danny
>
>
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>
>
>
>
>
> --
> Joel
> 301 541 8551
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
> ___
> This List is provided by the C&C Photo Album
>  http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>
>


-- 
Joel
301 541 8551
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

2012-07-27 Thread Rich Knowles 
Also:  I'd get the 5 step unit for any boat over 27 ft or so. Easier to use. 

Rich 
(mobile)

On 2012-07-27, at 15:45, Russ & Melody  wrote:

Hi Rich,
 
You might want to have a look at the 4 step model too. It may be more 
appropriate for Danny's boat (size = 33'). 

Cheers, Russ
Sweet 35 mk-1

At 11:39 AM 27/07/2012, you wrote:
> It's a three minute drive. No sweat. 
> 
> Rich 
> (mobile)
> 
> On 2012-07-27, at 18:23, "djhaug...@juno.com"  wrote:
> 
> Thats great Rich!  Thanks!
> You, maybe, should call first to make sure they have one in stock...?
> 
> 
> -- Original Message --
> From: "Rich Knowles" 
> To: 
> Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
> Date: Fri, 27 Jul 2012 15:15:40 -0300
> 
> Will do. I’ll email you in an hour or so.
> 
>  
> 
> From: cnc-list-boun...@cnc-list.com [ mailto:cnc-list-boun...@cnc-list.com] 
> On Behalf Of djhaug...@juno.com
> Sent: Friday, July 27, 2012 3:07 PM
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
> 
>  
> 
> really??
> 
> That would be way cool!!!
> 
>  
> 
> Danny
> 
> 
> 
> -- Original Message --
> From: "Rich Knowles" 
> To: 
> Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
> Date: Fri, 27 Jul 2012 15:05:08 -0300
> 
> If you need me to, I can drop into the store and have a look for you.
> 
>  
> 
> Rich Knowles
> 
> Indigo LF38
> 
> Halifax, Nova Scotia
> 
>  
> 
>  
> 
>  
> 
> From: cnc-list-boun...@cnc-list.com [ mailto:cnc-list-boun...@cnc-list.com] 
> On Behalf Of djhaug...@juno.com
> Sent: Friday, July 27, 2012 12:05 PM
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
> 
>  
> 
> yea...it looks like a mis print, but thats a good point.  The standoffs seem 
> to be able to move...I'll ask them
> 
> -- Original Message --
> From: Joel Aronson 
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
> Date: Fri, 27 Jul 2012 10:38:46 -0400
> 
> Danny,
> 
>  
> 
> Can the stand-offs be moved? �It seems to me that they should be lower than 
> pictured, otherwise the ladder is going to bend. �I don't know about the 
> grade of stainless.
> 
>  
> 
> Joel
> 
> On Fri, Jul 27, 2012 at 10:27 AM, djhaug...@juno.com  
> wrote:
> 
> I'm about to order this ladder. �Do any of you have any comments about it?
> 
> 
> http://us.binnacle.com/p5308/TRANSOM-LADDER-FOR-SAILBOAT-5-STEP-STAINLESS-STEEL/product_info.html#description
>  
> 
> Danny
> 
> 
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com 
> CnC-List@cnc-list.com
> 
> 
> 
>  
> 
> -- 
> Joel 
> 301 541 8551
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com 
> CnC-List@cnc-list.com
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com

___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

2012-07-27 Thread Rich Knowles 
I'm looking at the ladders as I write. They are made of very sturdy 316 
stainless steel and the stand off legs are completely adjustable between the 
rungs. I think you would have to work very hard to bend them at all  On the 5 
step model the legs can be set anywhere fin 8" to 17" below the pivot. On the 4 
step unit, they can be anywhere from 5-14 " below the pivot point. Both have 
the mounting pads 11" apart.  The 5 step unit's bottom step is 48" below the 
pivot point and the 4 step is 35".

I'll stand by a bit. Lemme know if you needier info. 

Rich 
(mobile)

On 2012-07-27, at 15:45, Russ & Melody  wrote:

Hi Rich,
 
You might want to have a look at the 4 step model too. It may be more 
appropriate for Danny's boat (size = 33'). 

Cheers, Russ
Sweet 35 mk-1

At 11:39 AM 27/07/2012, you wrote:
> It's a three minute drive. No sweat. 
> 
> Rich 
> (mobile)
> 
> On 2012-07-27, at 18:23, "djhaug...@juno.com"  wrote:
> 
> Thats great Rich!  Thanks!
> You, maybe, should call first to make sure they have one in stock...?
> 
> 
> -- Original Message --
> From: "Rich Knowles" 
> To: 
> Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
> Date: Fri, 27 Jul 2012 15:15:40 -0300
> 
> Will do. I’ll email you in an hour or so.
> 
>  
> 
> From: cnc-list-boun...@cnc-list.com [ mailto:cnc-list-boun...@cnc-list.com] 
> On Behalf Of djhaug...@juno.com
> Sent: Friday, July 27, 2012 3:07 PM
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
> 
>  
> 
> really??
> 
> That would be way cool!!!
> 
>  
> 
> Danny
> 
> 
> 
> -- Original Message --
> From: "Rich Knowles" 
> To: 
> Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
> Date: Fri, 27 Jul 2012 15:05:08 -0300
> 
> If you need me to, I can drop into the store and have a look for you.
> 
>  
> 
> Rich Knowles
> 
> Indigo LF38
> 
> Halifax, Nova Scotia
> 
>  
> 
>  
> 
>  
> 
> From: cnc-list-boun...@cnc-list.com [ mailto:cnc-list-boun...@cnc-list.com] 
> On Behalf Of djhaug...@juno.com
> Sent: Friday, July 27, 2012 12:05 PM
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
> 
>  
> 
> yea...it looks like a mis print, but thats a good point.  The standoffs seem 
> to be able to move...I'll ask them
> 
> -- Original Message --
> From: Joel Aronson 
> To: cnc-list@cnc-list.com
> Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
> Date: Fri, 27 Jul 2012 10:38:46 -0400
> 
> Danny,
> 
>  
> 
> Can the stand-offs be moved? �It seems to me that they should be lower than 
> pictured, otherwise the ladder is going to bend. �I don't know about the 
> grade of stainless.
> 
>  
> 
> Joel
> 
> On Fri, Jul 27, 2012 at 10:27 AM, djhaug...@juno.com  
> wrote:
> 
> I'm about to order this ladder. �Do any of you have any comments about it?
> 
> 
> http://us.binnacle.com/p5308/TRANSOM-LADDER-FOR-SAILBOAT-5-STEP-STAINLESS-STEEL/product_info.html#description
>  
> 
> Danny
> 
> 
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com 
> CnC-List@cnc-list.com
> 
> 
> 
>  
> 
> -- 
> Joel 
> 301 541 8551
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com 
> CnC-List@cnc-list.com
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com

___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

2012-07-27 Thread djhaug...@juno.com 
Yea I was wondering that as well.  I just want to make boarding as easy as 
possible for my wife.  We like to drop anchor and swim and getting back in 
needs to be easy.  The more she enjoys the boat, the more time I get to be on 
it!!!  LOL

-- Original Message --
From: Russ & Melody 
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS  STEEL
Date: Fri, 27 Jul 2012 11:45:09 -0700

Hi Rich,
  
 You might want to have a look at the 4 step model too. It may be more 
appropriate for Danny's boat (size = 33'). 

 Cheers, Russ
 Sweet 35 mk-1

 At 11:39 AM 27/07/2012, you wrote:
It's a three minute drive. No sweat. 

 Rich 
 (mobile)

 On 2012-07-27, at 18:23, "djhaug...@juno.com"  wrote:

 Thats great Rich!  Thanks!
 You, maybe, should call first to make sure they have one in stock...?

 
 -- Original Message --
 From: "Rich Knowles" 
 To: 
 Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
 Date: Fri, 27 Jul 2012 15:15:40 -0300

 Will do. I’ll email you in an hour or so.

  

 From:  cnc-list-boun...@cnc-list.com [ mailto:cnc-list-boun...@cnc-list.com] 
On Behalf Of djhaug...@juno.com
 Sent: Friday, July 27, 2012 3:07 PM
 To: cnc-list@cnc-list.com
 Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

  

 really??

 That would be way cool!!!

  

 Danny

 

 -- Original Message --
 From: "Rich Knowles" 
 To: 
 Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
 Date: Fri, 27 Jul 2012 15:05:08 -0300

 If you need me to, I can drop into the store and have a look for you.

  

 Rich Knowles

 Indigo LF38

 Halifax, Nova Scotia

  

  

  

 From:  cnc-list-boun...@cnc-list.com [ mailto:cnc-list-boun...@cnc-list.com] 
On Behalf Of djhaug...@juno.com
 Sent: Friday, July 27, 2012 12:05 PM
 To: cnc-list@cnc-list.com
 Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

  

 yea...it looks like a mis print, but thats a good point.  The standoffs seem 
to be able to move...I'll ask them

 -- Original Message --
 From: Joel Aronson 
 To: cnc-list@cnc-list.com
 Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
 Date: Fri, 27 Jul 2012 10:38:46 -0400

 Danny,

  

 Can the stand-offs be moved? �It seems to me that they should be lower 
than pictured, otherwise the ladder is going to bend. �I don't know 
about the grade of stainless.

  

 Joel

 On Fri, Jul 27, 2012 at 10:27 AM, djhaug...@juno.com  
wrote:

I'm about to order this ladder. �Do any of you have any comments about 
it?

  
http://us.binnacle.com/p5308/TRANSOM-LADDER-FOR-SAILBOAT-5-STEP-STAINLESS-STEEL/product_info.html#description
 

Danny


 ___
 This List is provided by the C&C Photo Album
 http://www.cncphotoalbum.com 
 CnC-List@cnc-list.com

 

  

 -- 
 Joel 
 301 541 8551
 ___
 This List is provided by the C&C Photo Album
 http://www.cncphotoalbum.com 
 CnC-List@cnc-list.com
 ___
 This List is provided by the C&C Photo Album
  http://www.cncphotoalbum.com
 CnC-List@cnc-list.com___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

2012-07-27 Thread Russ & Melody 

Hi Rich,

You might want to have a look at the 4 step model 
too. It may be more appropriate for Danny's boat (size = 33').


Cheers, Russ
Sweet 35 mk-1

At 11:39 AM 27/07/2012, you wrote:

It's a three minute drive. No sweat.

Rich
(mobile)

On 2012-07-27, at 18:23, 
"djhaug...@juno.com" 
<djhaug...@juno.com> wrote:


Thats great Rich!  Thanks!
You, maybe, should call first to make sure they have one in stock...?


-- Original Message --
From: "Rich Knowles" <r...@sailpower.ca>
To: <cnc-list@cnc-list.com>
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
Date: Fri, 27 Jul 2012 15:15:40 -0300

Will do. I’ll email you in an hour or so.



From: 
cnc-list-boun...@cnc-list.com 
[mailto:cnc-list-boun...@cnc-list.com] On Behalf 
Of djhaug...@juno.com

Sent: Friday, July 27, 2012 3:07 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL



really??

That would be way cool!!!



Danny



-- Original Message --
From: "Rich Knowles" <r...@sailpower.ca>
To: <cnc-list@cnc-list.com>
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
Date: Fri, 27 Jul 2012 15:05:08 -0300

If you need me to, I can drop into the store and have a look for you.



Rich Knowles

Indigo LF38

Halifax, Nova Scotia







From: 
cnc-list-boun...@cnc-list.com 
[mailto:cnc-list-boun...@cnc-list.com] On Behalf 
Of djhaug...@juno.com

Sent: Friday, July 27, 2012 12:05 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL



yea...it looks like a mis print, but thats a 
good point.  The standoffs seem to be able to move...I'll ask them


-- Original Message --
From: Joel Aronson <joel.aron...@gmail.com>
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
Date: Fri, 27 Jul 2012 10:38:46 -0400

Danny,



Can the stand-offs be moved? �It seems to me 
that they should be lower than pictured, 
otherwise the ladder is going to bend. �I 
don't know about the grade of stainless.




Joel

On Fri, Jul 27, 2012 at 10:27 AM, 
djhaug...@juno.com 
<djhaug...@juno.com> wrote:


I'm about to order this ladder. �Do any of you have any comments about it?


http://us.binnacle.com/p5308/TRANSOM-LADDER-FOR-SAILBOAT-5-STEP-STAINLESS-STEEL/product_info.html#description

Danny


___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com





--
Joel
301 541 8551
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

2012-07-27 Thread Rich Knowles 
It's a three minute drive. No sweat. 

Rich 
(mobile)

On 2012-07-27, at 18:23, "djhaug...@juno.com"  wrote:

Thats great Rich!  Thanks!
You, maybe, should call first to make sure they have one in stock...?


-- Original Message --
From: "Rich Knowles" 
To: 
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
Date: Fri, 27 Jul 2012 15:15:40 -0300

Will do. I’ll email you in an hour or so.

 

From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On 
Behalf Of djhaug...@juno.com
Sent: Friday, July 27, 2012 3:07 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

 

really??

That would be way cool!!!

 

Danny



-- Original Message --
From: "Rich Knowles" 
To: 
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
Date: Fri, 27 Jul 2012 15:05:08 -0300

If you need me to, I can drop into the store and have a look for you.

 

Rich Knowles

Indigo LF38

Halifax, Nova Scotia

 

 

 

From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On 
Behalf Of djhaug...@juno.com
Sent: Friday, July 27, 2012 12:05 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

 

yea...it looks like a mis print, but thats a good point.  The standoffs seem to 
be able to move...I'll ask them

-- Original Message --
From: Joel Aronson 
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
Date: Fri, 27 Jul 2012 10:38:46 -0400

Danny,

 

Can the stand-offs be moved? �It seems to me that they should be lower than 
pictured, otherwise the ladder is going to bend. �I don't know about the grade 
of stainless.

 

Joel

On Fri, Jul 27, 2012 at 10:27 AM, djhaug...@juno.com  wrote:

I'm about to order this ladder. �Do any of you have any comments about it?


http://us.binnacle.com/p5308/TRANSOM-LADDER-FOR-SAILBOAT-5-STEP-STAINLESS-STEEL/product_info.html#description

Danny


___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com




 

-- 
Joel 
301 541 8551

___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

2012-07-27 Thread djhaug...@juno.com 
Thats great Rich!  Thanks!You, maybe, should call first to make sure they have 
one in stock...?

-- Original Message --
From: "Rich Knowles" 
To: 
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
Date: Fri, 27 Jul 2012 15:15:40 -0300

Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

2012-07-27 Thread Rich Knowles 
Will do. I’ll email you in an hour or so.

 

From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On 
Behalf Of djhaug...@juno.com
Sent: Friday, July 27, 2012 3:07 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

 

really??

That would be way cool!!!

 

Danny



-- Original Message --
From: "Rich Knowles" 
To: 
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
Date: Fri, 27 Jul 2012 15:05:08 -0300

If you need me to, I can drop into the store and have a look for you.

 

Rich Knowles

Indigo LF38

Halifax, Nova Scotia

 

 

 

From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On 
Behalf Of djhaug...@juno.com
Sent: Friday, July 27, 2012 12:05 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

 

yea...it looks like a mis print, but thats a good point.  The standoffs seem to 
be able to move...I'll ask them

-- Original Message --
From: Joel Aronson 
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
Date: Fri, 27 Jul 2012 10:38:46 -0400

Danny,

 

Can the stand-offs be moved? �It seems to me that they should be lower than 
pictured, otherwise the ladder is going to bend. �I don't know about the grade 
of stainless.

 

Joel

On Fri, Jul 27, 2012 at 10:27 AM, djhaug...@juno.com  wrote:

I'm about to order this ladder. �Do any of you have any comments about it?


http://us.binnacle.com/p5308/TRANSOM-LADDER-FOR-SAILBOAT-5-STEP-STAINLESS-STEEL/product_info.html#description

Danny


___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com





 

-- 
Joel 
301 541 8551

___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

2012-07-27 Thread djhaug...@juno.com 
really??That would be way cool!!! Danny

-- Original Message --
From: "Rich Knowles" 
To: 
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
Date: Fri, 27 Jul 2012 15:05:08 -0300

Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

2012-07-27 Thread Rich Knowles 
If you need me to, I can drop into the store and have a look for you.

 

Rich Knowles

Indigo LF38

Halifax, Nova Scotia

 

 

 

From: cnc-list-boun...@cnc-list.com [mailto:cnc-list-boun...@cnc-list.com] On 
Behalf Of djhaug...@juno.com
Sent: Friday, July 27, 2012 12:05 PM
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

 

yea...it looks like a mis print, but thats a good point.  The standoffs seem to 
be able to move...I'll ask them

-- Original Message --
From: Joel Aronson 
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
Date: Fri, 27 Jul 2012 10:38:46 -0400

Danny,

 

Can the stand-offs be moved? �It seems to me that they should be lower than 
pictured, otherwise the ladder is going to bend. �I don't know about the grade 
of stainless.

 

Joel

On Fri, Jul 27, 2012 at 10:27 AM, djhaug...@juno.com  wrote:

I'm about to order this ladder. �Do any of you have any comments about it?


http://us.binnacle.com/p5308/TRANSOM-LADDER-FOR-SAILBOAT-5-STEP-STAINLESS-STEEL/product_info.html#description

Danny


___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com





 

-- 
Joel 
301 541 8551

___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

2012-07-27 Thread djhaug...@juno.com 
yea...it looks like a mis print, but thats a good point.  The standoffs seem to 
be able to move...I'll ask them

-- Original Message --
From: Joel Aronson 
To: cnc-list@cnc-list.com
Subject: Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL
Date: Fri, 27 Jul 2012 10:38:46 -0400

Danny,
 Can the stand-offs be moved? �It seems to me that they should be lower 
than pictured, otherwise the ladder is going to bend. �I don't know 
about the grade of stainless. Joel

On Fri, Jul 27, 2012 at 10:27 AM, djhaug...@juno.com  wrote:
I'm about to order this ladder. �Do any of you have any comments about 
it?
 
http://us.binnacle.com/p5308/TRANSOM-LADDER-FOR-SAILBOAT-5-STEP-STAINLESS-STEEL/product_info.html#descriptionDanny
___
 This List is provided by the C&C Photo Album
 http://www.cncphotoalbum.com
 CnC-List@cnc-list.com
 
 -- 
Joel 
301 541 8551___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

2012-07-27 Thread Joel Aronson 
Danny,

Can the stand-offs be moved?  It seems to me that they should be lower than
pictured, otherwise the ladder is going to bend.  I don't know about the
grade of stainless.

Joel

On Fri, Jul 27, 2012 at 10:27 AM, djhaug...@juno.com wrote:

> I'm about to order this ladder.  Do any of you have any comments about it?
>
>
>
> http://us.binnacle.com/p5308/TRANSOM-LADDER-FOR-SAILBOAT-5-STEP-STAINLESS-STEEL/product_info.html#description
>
> Danny
>
>
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>
>


-- 
Joel
301 541 8551
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Stus-List TRANSOM LADDER FOR SAILBOAT 5 STEP STAINLESS STEEL

2012-07-27 Thread djhaug...@juno.com 
I'm about to order this ladder.  Do any of you have any comments about it?
http://us.binnacle.com/p5308/TRANSOM-LADDER-FOR-SAILBOAT-5-STEP-STAINLESS-STEEL/product_info.html#descriptionDanny___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List Great afternoon sail

2012-07-27 Thread Pat Nevitt 
Joel,  I might have a spot on my boat next Wednesday for the races on the West 
River just 15 minutes south of you if you are interested.

Sent from my iPhone

On Jul 27, 2012, at 6:58 AM, Joel Aronson  wrote:

> I've been doing day sails between Sandy Point and Bloody Point. Have not 
> raced. I haven't introduced the GF to sailing yet. She's having minor surgery 
> so I won't be getting her out until after Labor Day. Maybe we can get 
> together mid to late August or September. 
> 
> Joel Aronson
> 
> 
> On Jul 26, 2012, at 5:09 PM, BILL POTTERTON  wrote:
> 
>> Yes, definately. We have been enjoying the new Mike's Crab House at our 
>> marina and haven't traveled at all yet just sailing and racing locally, 
>> would like to head down to Annapolis soon.
>>  
>> Bill
>> On Thu, Jul 26, 2012 at 3:35 PM, Joel Aronson  wrote:
>> Bill
>> 
>> Mill Creek near Cantlers. We should meet up!
>> 
>> Joel Aronson
>> 
>> 
>> On Jul 26, 2012, at 3:26 PM, BILL POTTERTON  wrote:
>> 
>>> Joel,  where do you keep your boat?  I am in White Rocks marina, Rock Creek 
>>> off the mouth of the Patapsco.
>>>  
>>> Bill
>>> JollyMon
>>> 35-3
>>> 
>>> On Thu, Jul 26, 2012 at 2:52 PM, Joel Aronson  
>>> wrote:
>>> Yes, I do get to sail the boat!
>>> 
>>> I took my GF's advice yesterday and ignored the forecast of 1-3 knot winds 
>>> and went for an afternoon sail.  Had a southerly breeze of 6-8 knots and 
>>> air temps in the 80s with low humidity (for the Bay).  I sailed south past 
>>> Annapolis to Thomas Point and back, getting up to 6.1 knots SOG at slack 
>>> tide.  
>>> 
>>> On the way back I saw the Wednesday night racers - which got me thinking.  
>>> I dug out the PHRF certificate from 2000, updated the info with the 
>>> dimensions of the new jib and sent it off.  I doubt I could be competitive 
>>> with the 135 in light air, but it could still be fun if I can put together 
>>> a crew in the fall.  
>>> 
>>> Hope to finish the hatches Saturday!
>>> 
>>> -- 
>>> Joel 
>>> 35/3
>>> The Office
>>> Annapolis
>>> 301 541 8551
>>> 
>>> ___
>>> This List is provided by the C&C Photo Album
>>> http://www.cncphotoalbum.com
>>> CnC-List@cnc-list.com
>>> 
>>> 
>>> ___
>>> This List is provided by the C&C Photo Album
>>> http://www.cncphotoalbum.com
>>> CnC-List@cnc-list.com
>> 
>> ___
>> This List is provided by the C&C Photo Album
>> http://www.cncphotoalbum.com
>> CnC-List@cnc-list.com
>> 
>> 
>> ___
>> This List is provided by the C&C Photo Album
>> http://www.cncphotoalbum.com
>> CnC-List@cnc-list.com
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List Great afternoon sail

2012-07-27 Thread BILL POTTERTON 
Sounds good, will be in touch when the heat wave breaks, the wife does not
like being trapped on the boat when its 95+ on the bay.

Bill

On Fri, Jul 27, 2012 at 6:58 AM, Joel Aronson wrote:

> I've been doing day sails between Sandy Point and Bloody Point. Have not
> raced. I haven't introduced the GF to sailing yet. She's having minor
> surgery so I won't be getting her out until after Labor Day. Maybe we can
> get together mid to late August or September.
>
> Joel Aronson
>
>
> On Jul 26, 2012, at 5:09 PM, BILL POTTERTON  wrote:
>
> Yes, definately. We have been enjoying the new Mike's Crab House at our
> marina and haven't traveled at all yet just sailing and racing locally,
> would like to head down to Annapolis soon.
>
> Bill
> On Thu, Jul 26, 2012 at 3:35 PM, Joel Aronson wrote:
>
>> Bill
>>
>> Mill Creek near Cantlers. We should meet up!
>>
>> Joel Aronson
>>
>>
>> On Jul 26, 2012, at 3:26 PM, BILL POTTERTON  wrote:
>>
>> Joel,  where do you keep your boat?  I am in White Rocks marina, Rock
>> Creek off the mouth of the Patapsco.
>>
>> Bill
>> JollyMon
>> 35-3
>>
>> On Thu, Jul 26, 2012 at 2:52 PM, Joel Aronson wrote:
>>
>>> Yes, I do get to sail the boat!
>>>
>>> I took my GF's advice yesterday and ignored the forecast of 1-3 knot
>>> winds and went for an afternoon sail.  Had a southerly breeze of 6-8 knots
>>> and air temps in the 80s with low humidity (for the Bay).  I sailed south
>>> past Annapolis to Thomas Point and back, getting up to 6.1 knots SOG at
>>> slack tide.
>>>
>>> On the way back I saw the Wednesday night racers - which got me
>>> thinking.  I dug out the PHRF certificate from 2000, updated the info with
>>> the dimensions of the new jib and sent it off.  I doubt I could be
>>> competitive with the 135 in light air, but it could still be fun if I can
>>> put together a crew in the fall.
>>>
>>> Hope to finish the hatches Saturday!
>>>
>>> --
>>> Joel
>>> 35/3
>>> The Office
>>> Annapolis
>>> 301 541 8551
>>>
>>> ___
>>> This List is provided by the C&C Photo Album
>>> http://www.cncphotoalbum.com
>>> CnC-List@cnc-list.com
>>>
>>>
>> ___
>> This List is provided by the C&C Photo Album
>> http://www.cncphotoalbum.com
>> CnC-List@cnc-list.com
>>
>>
>> ___
>> This List is provided by the C&C Photo Album
>> http://www.cncphotoalbum.com
>> CnC-List@cnc-list.com
>>
>>
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>
>
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>
>
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List Great afternoon sail

2012-07-27 Thread Joel Aronson 
I've been doing day sails between Sandy Point and Bloody Point. Have not
raced. I haven't introduced the GF to sailing yet. She's having minor
surgery so I won't be getting her out until after Labor Day. Maybe we can
get together mid to late August or September.

Joel Aronson


On Jul 26, 2012, at 5:09 PM, BILL POTTERTON  wrote:

Yes, definately. We have been enjoying the new Mike's Crab House at our
marina and haven't traveled at all yet just sailing and racing locally,
would like to head down to Annapolis soon.

Bill
On Thu, Jul 26, 2012 at 3:35 PM, Joel Aronson wrote:

> Bill
>
> Mill Creek near Cantlers. We should meet up!
>
> Joel Aronson
>
>
> On Jul 26, 2012, at 3:26 PM, BILL POTTERTON  wrote:
>
> Joel,  where do you keep your boat?  I am in White Rocks marina, Rock
> Creek off the mouth of the Patapsco.
>
> Bill
> JollyMon
> 35-3
>
> On Thu, Jul 26, 2012 at 2:52 PM, Joel Aronson wrote:
>
>> Yes, I do get to sail the boat!
>>
>> I took my GF's advice yesterday and ignored the forecast of 1-3 knot
>> winds and went for an afternoon sail.  Had a southerly breeze of 6-8 knots
>> and air temps in the 80s with low humidity (for the Bay).  I sailed south
>> past Annapolis to Thomas Point and back, getting up to 6.1 knots SOG at
>> slack tide.
>>
>> On the way back I saw the Wednesday night racers - which got me thinking.
>>  I dug out the PHRF certificate from 2000, updated the info with the
>> dimensions of the new jib and sent it off.  I doubt I could be competitive
>> with the 135 in light air, but it could still be fun if I can put together
>> a crew in the fall.
>>
>> Hope to finish the hatches Saturday!
>>
>> --
>> Joel
>> 35/3
>> The Office
>> Annapolis
>> 301 541 8551
>>
>> ___
>> This List is provided by the C&C Photo Album
>> http://www.cncphotoalbum.com
>> CnC-List@cnc-list.com
>>
>>
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>
>
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
>
>
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com

Re: Stus-List Pulpit wanted for 35mk III

2012-07-27 Thread Indigo 
Thanks everybody for the advice. I will definitely get a surveyor to make sure 
there is no structural damage to hull or lifelines

Looks like the replacement pulpit will have to be custom made

Jonathan

On Jul 26, 2012, at 18:39, Tim Goodyear  wrote:

> Sorry to hear that Jonathan.  Are you still in the area?  We in Coecles 
> Harbor, heading to Sag Harbor tomorrow (Friday).
>  
> Tim
> Mojito
> C&C 35-3
> Branford, CT
> 
> On Thu, Jul 26, 2012 at 3:10 PM, Indigo  wrote:
> Long story but two nights ago a boat in Dering Harbor broke loose and smashed 
> into my pulpit. Does anyone know where I can get a replacement ?  Does South 
> Shore (is that the correct name) have them?
> 
> I am sure that others have been through this before. Is there any chance of 
> structural hull damage from such an accident? None is visible from the outside
> 
> The collision also caused some deep ish scratches through the already old awl 
> grip. Any thoughts in what I could reasonably ask the insurance co (his or 
> Shelter Island Yacht Club) to pay for (a new awl grip job would be wonderful 
> but I think unlikely!)
> 
> --
> Jonathan
> indigo 35mk III enroute home to Southport
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
> 
> ___
> This List is provided by the C&C Photo Album
> http://www.cncphotoalbum.com
> CnC-List@cnc-list.com
___
This List is provided by the C&C Photo Album
http://www.cncphotoalbum.com
CnC-List@cnc-list.com