Re: Stus-List ​Re: Below deck auto pilot installation for C 40 (David)

2018-06-06 Thread Gary Russell via CnC-List 
On Kaylarah (37+) I had to reinforce the rudder assembly and then cut the
rudder tube to insert the Edson Rudder Arm.  See here
<https://drive.google.com/open?id=1PxnlMnxH0HueWkyJDLNkBvv_0oWDnxlQ>.  It
works extremely well.

Gary
S/V Kaylarah
'90 C 37+
East Greenwich, RI, USA

~~~_/)~~


On Wed, Jun 6, 2018 at 1:38 PM, Don Marlin via CnC-List <
cnc-list@cnc-list.com> wrote:

> My boat is a 1983 C 40 AC. The aft part should be similar to most C
> 40's.
>
> Thanks David. Specifically I was looking for ideas around the quadrant.
> Right now the quadrant is tight between the rudder tube and the deck and
> there is no space. I have seen others online who have used the existing
> quadrant but I view this as option B. So I like to see what others have
> done and then decide on the scope. Thanks Dave for the link, shelf looks
> good and will ado[pt some ideas. I plan to use an Octopus drive and
> Raymarine head.
>
>
> On Wed, Jun 6, 2018 at 12:00 PM,  wrote:
>
>> Send CnC-List mailing list submissions to
>> cnc-list@cnc-list.com
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>> or, via email, send a message with subject or body 'help' to
>> cnc-list-requ...@cnc-list.com
>>
>> You can reach the person managing the list at
>> cnc-list-ow...@cnc-list.com
>>
>> When replying, please edit your Subject line so it is more specific
>> than "Re: Contents of CnC-List digest..."
>>
>>
>> Today's Topics:
>>
>>1.
>> ​​
>> Re:  Below deck auto pilot installation for C 40 (David)
>>
>>
>> --
>>
>> Message: 1
>> Date: Wed, 6 Jun 2018 15:59:12 +
>> From: David 
>> To: "cnc-list@cnc-list.com" 
>> Subject: Re: Stus-List Below deck auto pilot installation for C 40
>> Message-ID:
>> > 16.prod.outlook.com>
>>
>> Content-Type: text/plain; charset="windows-1252"
>>
>> Dave...call my  cell to discuss.
>>
>>
>> David F. Risch, J. D.
>>
>> Gulf Stream Associates, LLC
>>
>> (401) 419-4650
>>
>>
>> 
>> From: CnC-List  on behalf of Dave Godwin
>> via CnC-List 
>> Sent: Wednesday, June 6, 2018 11:50 AM
>> To: cnc-list@cnc-list.com
>> Cc: Dave Godwin; Don Marlin
>> Subject: Re: Stus-List Below deck auto pilot installation for C 40
>>
>> Not 40? owner but perhaps the under-cockpit space in our 37? (1980?s
>> version?) is similar. I did this<http://roninrebuild.blogs
>> pot.com/2014/02/autopilots-from-wheel-to-below-deck.html>. Not perfect
>> but it works.
>>
>> Best,
>> Dave Godwin
>> 1982 C 37 - Ronin
>> Reedville - Chesapeake Bay
>> Ronin?s Overdue Refit<http://roninrebuild.blogspot.com/>
>>
>> On Jun 6, 2018, at 11:34 AM, Don Marlin via CnC-List <
>> cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote:
>>
>> I am starting to plan a below deck Autopilot for my C 40. I have looked
>> below and it is clear that I will need to make some modifications to
>> support a tiller arm. I was wondering if there are any other 40 owners who
>> could share pictures of their installations. Currently I have a wheel pilot
>> and it is good for motoring and light winds. Looking for something more
>> capable.
>>
>> Thanks in advance
>>
>> Don Marlin
>>
>> ___
>>
>> Thanks everyone for supporting this list with your contributions.  Each
>> and every one is greatly appreciated.  If you want to support the list -
>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>>
>>
>> -- next part --
>> An HTML attachment was scrubbed...
>> URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachm
>> ents/20180606/dcb01df8/attachment-0001.html>
>>
>> --
>>
>> Subject: Digest Footer
>>
>> ___
>> CnC-List mailing list
>> CnC-List@cnc-list.com
>> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>>
>>
>> --
>>
>> End of CnC-List Digest, Vol 149, Issue 21
>> *
>>
>
>
>
> --
> Don Marlin
> (613) 832 4040
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List CnC-List Digest, Vol 149, Issue 7

2018-06-06 Thread William Walker via CnC-List 
Find A Fastenal store nearby and take it there.  They have everything or will 
get it.
Bill Walker
CnC 36

Sent from AOL Mobile Mail

On Wednesday, June 6, 2018 Garry Cross via CnC-List  
wrote:

I tried a 1/8 straight punch. It was too big. I could not find a smaller 
straight punch. Had to use a tapered punch and pulled the pin out with vice 
grips. 


Question.

Where is replacement from?

Are there connectors available?


Thanks






-- Forwarded message --
From: T power 
To: "cnc-list@cnc-list.com" 
Cc: 
Bcc: 
Date: Sat, 2 Jun 2018 17:06:11 +
Subject: Re: Stus-List Roll pin size

Hi Mike,


Thanks for the info and tip on getting them out, I'm definitely going to try 
pressing them out.


Cheers


Tom Power

Invictus

C 30 MK1

Fredericton, NB

From: CnC-List  on behalf of T power via 
CnC-List 
Sent: Friday, June 1, 2018 8:44:10 PM
To: cnc-list@cnc-list.com
Cc: T power
Subject: Stus-List Roll pin size 

 

Hi everyone, I need to replace a foil on my elderly harken furler. They are 
joined with roll pins, which will need to be drilled out. Anyone have any idea 
what size they would be. Thanks for any help


Tom Power

Invictus

C 30 MK1

Fredericton, NB




-- Forwarded message --
From: "Dennis C." 
To: CnClist 
Cc: 
Bcc: 
Date: Sat, 2 Jun 2018 13:26:38 -0500
Subject: Re: Stus-List Roll pin size

Definitely press or tap the pin out.  My rigger buddy and I have worked on a 
couple of MKI's.  We used an appropriately sized punch and gently tapped out 
the roll pins.  Here's Harken's directions on removing/replacing roll pins.


http://www.harken.com/uploadedfiles/Product_Support/PDF/4884.pdf


Unfortunately, I don't have the diameter of pin to give you.  Harken no longer 
stocks them but they may be able to give you the correct size information.  You 
can them order them from mcmaster.com or another vendor.


Be sure to use the correct size.  If you use a size that's too small, you risk 
having a pin work it's way partially out of the extrusion.  If your swivel is 
up, you won't be able to drop it.  :)  Seen that a couple times.  It isn't 
pretty.


Dennis C.

Touche' 35-1 #83

Mandeville, LA


On Sat, Jun 2, 2018 at 12:06 PM, T power via CnC-List  
wrote:

Hi Mike,


Thanks for the info and tip on getting them out, I'm definitely going to try 
pressing them out.


Cheers


Tom Power

Invictus

C 30 MK1

Fredericton, NB

From: CnC-List  on behalf of T power via 
CnC-List 
Sent: Friday, June 1, 2018 8:44:10 PM
To: cnc-list@cnc-list.com
Cc: T power
Subject: Stus-List Roll pin size 

 

Hi everyone, I need to replace a foil on my elderly harken furler. They are 
joined with roll pins, which will need to be drilled out. Anyone have any idea 
what size they would be. Thanks for any help


Tom Power

Invictus

C 30 

___

Thanks everyone for supporting this list with your contributions. Each and 
every one is greatly appreciated. If you want to support the list - use PayPal 
to send contribution -- https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List CnC-List Digest, Vol 149, Issue 7

2018-06-06 Thread Garry Cross via CnC-List 
>
> I tried a 1/8 straight punch. It was too big. I could not find a smaller
straight punch. Had to use a tapered punch and pulled the pin out with vice
grips.

Question.
Where is replacement from?
Are there connectors available?

Thanks


>


> -- Forwarded message --
> From: T power 
> To: "cnc-list@cnc-list.com" 
> Cc:
> Bcc:
> Date: Sat, 2 Jun 2018 17:06:11 +
> Subject: Re: Stus-List Roll pin size
>
> Hi Mike,
>
>
> Thanks for the info and tip on getting them out, I'm definitely going to
> try pressing them out.
>
>
> Cheers
>
>
> Tom Power 
> Invictus
> C 30 MK1
> Fredericton, NB
> --
> *From:* CnC-List  on behalf of T power via
> CnC-List 
> *Sent:* Friday, June 1, 2018 8:44:10 PM
> *To:* cnc-list@cnc-list.com
> *Cc:* T power
> *Subject:* Stus-List Roll pin size
>
>
> Hi everyone, I need to replace a foil on my elderly harken furler. They
> are joined with roll pins, which will need to be drilled out. Anyone have
> any idea what size they would be. Thanks for any help
>
>
> Tom Power 
> Invictus
> C 30 MK1
> Fredericton, NB
>
>
>
> -- Forwarded message --
> From: "Dennis C." 
> To: CnClist 
> Cc:
> Bcc:
> Date: Sat, 2 Jun 2018 13:26:38 -0500
> Subject: Re: Stus-List Roll pin size
> Definitely press or tap the pin out.  My rigger buddy and I have worked on
> a couple of MKI's.  We used an appropriately sized punch and gently tapped
> out the roll pins.  Here's Harken's directions on removing/replacing roll
> pins.
>
> http://www.harken.com/uploadedfiles/Product_Support/PDF/4884.pdf
>
> Unfortunately, I don't have the diameter of pin to give you.  Harken no
> longer stocks them but they may be able to give you the correct size
> information.  You can them order them from mcmaster.com or another vendor.
>
> Be sure to use the correct size.  If you use a size that's too small, you
> risk having a pin work it's way partially out of the extrusion.  If your
> swivel is up, you won't be able to drop it.  :)  Seen that a couple times.
> It isn't pretty.
>
> Dennis C.
> Touche' 35-1 #83
> Mandeville, LA
>
> On Sat, Jun 2, 2018 at 12:06 PM, T power via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Hi Mike,
>>
>>
>> Thanks for the info and tip on getting them out, I'm definitely going to
>> try pressing them out.
>>
>>
>> Cheers
>>
>>
>> Tom Power 
>> Invictus
>> C 30 MK1
>> Fredericton, NB
>> --
>> *From:* CnC-List  on behalf of T power
>> via CnC-List 
>> *Sent:* Friday, June 1, 2018 8:44:10 PM
>> *To:* cnc-list@cnc-list.com
>> *Cc:* T power
>> *Subject:* Stus-List Roll pin size
>>
>>
>> Hi everyone, I need to replace a foil on my elderly harken furler. They
>> are joined with roll pins, which will need to be drilled out. Anyone have
>> any idea what size they would be. Thanks for any help
>>
>>
>> Tom Power 
>> Invictus
>> C 30
>>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List ​Re: Below deck auto pilot installation for C 40 (David)

2018-06-06 Thread Josh Muckley via CnC-List 
Don I've posted this before.  I don't know if you have seen it or not and
it may not be applicable but here are some pictures of my below deck
installation.

https://drive.google.com/folderview?id=0B8pEh5lnvP1yZU1hczd0QlNEOWc

Josh Muckley
S/V Sea Hawk
1989 C 37+
Solomons, MD




On Wed, Jun 6, 2018, 1:39 PM Don Marlin via CnC-List 
wrote:

> My boat is a 1983 C 40 AC. The aft part should be similar to most C
> 40's.
>
> Thanks David. Specifically I was looking for ideas around the quadrant.
> Right now the quadrant is tight between the rudder tube and the deck and
> there is no space. I have seen others online who have used the existing
> quadrant but I view this as option B. So I like to see what others have
> done and then decide on the scope. Thanks Dave for the link, shelf looks
> good and will ado[pt some ideas. I plan to use an Octopus drive and
> Raymarine head.
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List ​Re: Below deck auto pilot installation for C 40 (David)

2018-06-06 Thread David via CnC-List 
Is your quadrant an Edson radial wheel?

From my Android...


From: CnC-List  on behalf of David via CnC-List 

Sent: Wednesday, June 6, 2018 1:51:13 PM
To: cnc-list@cnc-list.com
Cc: David
Subject: Re: Stus-List ​Re: Below deck auto pilot installation for C 40 
(David)


My 40 (not the aft cabin) has the drive installed upside down and bolted to  
the cockpit floor.  I would think there would be enough space for the tiller 
arm as mine has one installed.   The aft cabin model should not be that much 
different back there...but perhaps they are.


David F. Risch, J. D.

Gulf Stream Associates, LLC

(401) 419-4650



From: CnC-List  on behalf of Don Marlin via 
CnC-List 
Sent: Wednesday, June 6, 2018 1:38 PM
To: cnc-list@cnc-list.com
Cc: Don Marlin
Subject: Stus-List Re: Below deck auto pilot installation for C 40 (David)

My boat is a 1983 C 40 AC. The aft part should be similar to most C 40's.

Thanks David. Specifically I was looking for ideas around the quadrant. Right 
now the quadrant is tight between the rudder tube and the deck and there is no 
space. I have seen others online who have used the existing quadrant but I view 
this as option B. So I like to see what others have done and then decide on the 
scope. Thanks Dave for the link, shelf looks good and will ado[pt some ideas. I 
plan to use an Octopus drive and Raymarine head.


On Wed, Jun 6, 2018 at 12:00 PM, 
mailto:cnc-list-requ...@cnc-list.com>> wrote:
Send CnC-List mailing list submissions to
cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>

To subscribe or unsubscribe via the World Wide Web, visit
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
or, via email, send a message with subject or body 'help' to
cnc-list-requ...@cnc-list.com<mailto:cnc-list-requ...@cnc-list.com>

You can reach the person managing the list at
cnc-list-ow...@cnc-list.com<mailto:cnc-list-ow...@cnc-list.com>

When replying, please edit your Subject line so it is more specific
than "Re: Contents of CnC-List digest..."


Today's Topics:

   1.
Re:  Below deck auto pilot installation for C 40 (David)


--

Message: 1
Date: Wed, 6 Jun 2018 15:59:12 +
From: David mailto:davidrisc...@msn.com>>
To: "cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>" 
mailto:cnc-list@cnc-list.com>>
Subject: Re: Stus-List Below deck auto pilot installation for C 40
Message-ID:

mailto:cy4pr16mb16538b32f89dcbcb7f319191da...@cy4pr16mb1653.namprd16.prod.outlook.com>>

Content-Type: text/plain; charset="windows-1252"

Dave...call my  cell to discuss.


David F. Risch, J. D.

Gulf Stream Associates, LLC

(401) 419-4650



From: CnC-List 
mailto:cnc-list-boun...@cnc-list.com>> on behalf 
of Dave Godwin via CnC-List 
mailto:cnc-list@cnc-list.com>>
Sent: Wednesday, June 6, 2018 11:50 AM
To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>
Cc: Dave Godwin; Don Marlin
Subject: Re: Stus-List Below deck auto pilot installation for C 40

Not 40? owner but perhaps the under-cockpit space in our 37? (1980?s version?) 
is similar. I did 
this<http://roninrebuild.blogspot.com/2014/02/autopilots-from-wheel-to-below-deck.html>.
 Not perfect but it works.

Best,
Dave Godwin
1982 C 37 - Ronin
Reedville - Chesapeake Bay
Ronin?s Overdue Refit<http://roninrebuild.blogspot.com/>

On Jun 6, 2018, at 11:34 AM, Don Marlin via CnC-List 
mailto:cnc-list@cnc-list.com><mailto:cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>>>
 wrote:

I am starting to plan a below deck Autopilot for my C 40. I have looked below 
and it is clear that I will need to make some modifications to support a tiller 
arm. I was wondering if there are any other 40 owners who could share pictures 
of their installations. Currently I have a wheel pilot and it is good for 
motoring and light winds. Looking for something more capable.

Thanks in advance

Don Marlin

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


-- next part ------
An HTML attachment was scrubbed...
URL: 
<http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20180606/dcb01df8/attachment-0001.html>

--

Subject: Digest Footer

___
CnC-List mailing list
CnC-List@cnc-list.com<mailto:CnC-List@cnc-list.com>
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com


--

End of CnC-List Digest, Vol 149, Issue 21
*



--
Don Marlin
(613) 832 40

Re: Stus-List ​Re: Below deck auto pilot installation for C 40 (David)

2018-06-06 Thread David via CnC-List 
My 40 (not the aft cabin) has the drive installed upside down and bolted to  
the cockpit floor.  I would think there would be enough space for the tiller 
arm as mine has one installed.   The aft cabin model should not be that much 
different back there...but perhaps they are.


David F. Risch, J. D.

Gulf Stream Associates, LLC

(401) 419-4650



From: CnC-List  on behalf of Don Marlin via 
CnC-List 
Sent: Wednesday, June 6, 2018 1:38 PM
To: cnc-list@cnc-list.com
Cc: Don Marlin
Subject: Stus-List Re: Below deck auto pilot installation for C 40 (David)

My boat is a 1983 C 40 AC. The aft part should be similar to most C 40's.

Thanks David. Specifically I was looking for ideas around the quadrant. Right 
now the quadrant is tight between the rudder tube and the deck and there is no 
space. I have seen others online who have used the existing quadrant but I view 
this as option B. So I like to see what others have done and then decide on the 
scope. Thanks Dave for the link, shelf looks good and will ado[pt some ideas. I 
plan to use an Octopus drive and Raymarine head.


On Wed, Jun 6, 2018 at 12:00 PM, 
mailto:cnc-list-requ...@cnc-list.com>> wrote:
Send CnC-List mailing list submissions to
cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>

To subscribe or unsubscribe via the World Wide Web, visit
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
or, via email, send a message with subject or body 'help' to
cnc-list-requ...@cnc-list.com<mailto:cnc-list-requ...@cnc-list.com>

You can reach the person managing the list at
cnc-list-ow...@cnc-list.com<mailto:cnc-list-ow...@cnc-list.com>

When replying, please edit your Subject line so it is more specific
than "Re: Contents of CnC-List digest..."


Today's Topics:

   1.
Re:  Below deck auto pilot installation for C 40 (David)


--

Message: 1
Date: Wed, 6 Jun 2018 15:59:12 +
From: David mailto:davidrisc...@msn.com>>
To: "cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>" 
mailto:cnc-list@cnc-list.com>>
Subject: Re: Stus-List Below deck auto pilot installation for C 40
Message-ID:

mailto:cy4pr16mb16538b32f89dcbcb7f319191da...@cy4pr16mb1653.namprd16.prod.outlook.com>>

Content-Type: text/plain; charset="windows-1252"

Dave...call my  cell to discuss.


David F. Risch, J. D.

Gulf Stream Associates, LLC

(401) 419-4650



From: CnC-List 
mailto:cnc-list-boun...@cnc-list.com>> on behalf 
of Dave Godwin via CnC-List 
mailto:cnc-list@cnc-list.com>>
Sent: Wednesday, June 6, 2018 11:50 AM
To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>
Cc: Dave Godwin; Don Marlin
Subject: Re: Stus-List Below deck auto pilot installation for C 40

Not 40? owner but perhaps the under-cockpit space in our 37? (1980?s version?) 
is similar. I did 
this<http://roninrebuild.blogspot.com/2014/02/autopilots-from-wheel-to-below-deck.html>.
 Not perfect but it works.

Best,
Dave Godwin
1982 C 37 - Ronin
Reedville - Chesapeake Bay
Ronin?s Overdue Refit<http://roninrebuild.blogspot.com/>

On Jun 6, 2018, at 11:34 AM, Don Marlin via CnC-List 
mailto:cnc-list@cnc-list.com><mailto:cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>>>
 wrote:

I am starting to plan a below deck Autopilot for my C 40. I have looked below 
and it is clear that I will need to make some modifications to support a tiller 
arm. I was wondering if there are any other 40 owners who could share pictures 
of their installations. Currently I have a wheel pilot and it is good for 
motoring and light winds. Looking for something more capable.

Thanks in advance

Don Marlin

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


-- next part ------
An HTML attachment was scrubbed...
URL: 
<http://cnc-list.com/pipermail/cnc-list_cnc-list.com/attachments/20180606/dcb01df8/attachment-0001.html>

--

Subject: Digest Footer

___
CnC-List mailing list
CnC-List@cnc-list.com<mailto:CnC-List@cnc-list.com>
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com


--

End of CnC-List Digest, Vol 149, Issue 21
*



--
Don Marlin
(613) 832 4040
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List ​Re: Below deck auto pilot installation for C 40 (David)

2018-06-06 Thread Don Marlin via CnC-List 
My boat is a 1983 C 40 AC. The aft part should be similar to most C
40's.

Thanks David. Specifically I was looking for ideas around the quadrant.
Right now the quadrant is tight between the rudder tube and the deck and
there is no space. I have seen others online who have used the existing
quadrant but I view this as option B. So I like to see what others have
done and then decide on the scope. Thanks Dave for the link, shelf looks
good and will ado[pt some ideas. I plan to use an Octopus drive and
Raymarine head.


On Wed, Jun 6, 2018 at 12:00 PM,  wrote:

> Send CnC-List mailing list submissions to
> cnc-list@cnc-list.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
> or, via email, send a message with subject or body 'help' to
> cnc-list-requ...@cnc-list.com
>
> You can reach the person managing the list at
> cnc-list-ow...@cnc-list.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of CnC-List digest..."
>
>
> Today's Topics:
>
>1.
> ​​
> Re:  Below deck auto pilot installation for C 40 (David)
>
>
> --
>
> Message: 1
> Date: Wed, 6 Jun 2018 15:59:12 +
> From: David 
> To: "cnc-list@cnc-list.com" 
> Subject: Re: Stus-List Below deck auto pilot installation for C 40
> Message-ID:
>  16.prod.outlook.com>
>
> Content-Type: text/plain; charset="windows-1252"
>
> Dave...call my  cell to discuss.
>
>
> David F. Risch, J. D.
>
> Gulf Stream Associates, LLC
>
> (401) 419-4650
>
>
> 
> From: CnC-List  on behalf of Dave Godwin
> via CnC-List 
> Sent: Wednesday, June 6, 2018 11:50 AM
> To: cnc-list@cnc-list.com
> Cc: Dave Godwin; Don Marlin
> Subject: Re: Stus-List Below deck auto pilot installation for C 40
>
> Not 40? owner but perhaps the under-cockpit space in our 37? (1980?s
> version?) is similar. I did this<http://roninrebuild.blogs
> pot.com/2014/02/autopilots-from-wheel-to-below-deck.html>. Not perfect
> but it works.
>
> Best,
> Dave Godwin
> 1982 C 37 - Ronin
> Reedville - Chesapeake Bay
> Ronin?s Overdue Refit<http://roninrebuild.blogspot.com/>
>
> On Jun 6, 2018, at 11:34 AM, Don Marlin via CnC-List <
> cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>> wrote:
>
> I am starting to plan a below deck Autopilot for my C 40. I have looked
> below and it is clear that I will need to make some modifications to
> support a tiller arm. I was wondering if there are any other 40 owners who
> could share pictures of their installations. Currently I have a wheel pilot
> and it is good for motoring and light winds. Looking for something more
> capable.
>
> Thanks in advance
>
> Don Marlin
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
> -- next part --
> An HTML attachment was scrubbed...
> URL: <http://cnc-list.com/pipermail/cnc-list_cnc-list.com/
> attachments/20180606/dcb01df8/attachment-0001.html>
>
> --
>
> Subject: Digest Footer
>
> ___
> CnC-List mailing list
> CnC-List@cnc-list.com
> http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
>
>
> --
>
> End of CnC-List Digest, Vol 149, Issue 21
> *
>



-- 
Don Marlin
(613) 832 4040
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Below deck auto pilot installation for C 40

2018-06-06 Thread David via CnC-List 
Dave...call my  cell to discuss.


David F. Risch, J. D.

Gulf Stream Associates, LLC

(401) 419-4650



From: CnC-List  on behalf of Dave Godwin via 
CnC-List 
Sent: Wednesday, June 6, 2018 11:50 AM
To: cnc-list@cnc-list.com
Cc: Dave Godwin; Don Marlin
Subject: Re: Stus-List Below deck auto pilot installation for C 40

Not 40’ owner but perhaps the under-cockpit space in our 37’ (1980’s version…) 
is similar. I did 
this.
 Not perfect but it works.

Best,
Dave Godwin
1982 C 37 - Ronin
Reedville - Chesapeake Bay
Ronin’s Overdue Refit

On Jun 6, 2018, at 11:34 AM, Don Marlin via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:

I am starting to plan a below deck Autopilot for my C 40. I have looked below 
and it is clear that I will need to make some modifications to support a tiller 
arm. I was wondering if there are any other 40 owners who could share pictures 
of their installations. Currently I have a wheel pilot and it is good for 
motoring and light winds. Looking for something more capable.

Thanks in advance

Don Marlin

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Below deck auto pilot installation for C 40

2018-06-06 Thread Dave Godwin via CnC-List 
Not 40’ owner but perhaps the under-cockpit space in our 37’ (1980’s version…) 
is similar. I did this 
.
 Not perfect but it works.

Best,
Dave Godwin
1982 C 37 - Ronin
Reedville - Chesapeake Bay
Ronin’s Overdue Refit 

> On Jun 6, 2018, at 11:34 AM, Don Marlin via CnC-List  
> wrote:
> 
> I am starting to plan a below deck Autopilot for my C 40. I have looked 
> below and it is clear that I will need to make some modifications to support 
> a tiller arm. I was wondering if there are any other 40 owners who could 
> share pictures of their installations. Currently I have a wheel pilot and it 
> is good for motoring and light winds. Looking for something more capable.
> 
> Thanks in advance
>  
> Don Marlin
> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Below deck auto pilot installation for C 40

2018-06-06 Thread David via CnC-List 
Don,


I will try and take pics for you over the next eek or so...what year is your 40?


David F. Risch, J. D.

Gulf Stream Associates, LLC

(401) 419-4650



From: CnC-List  on behalf of Don Marlin via 
CnC-List 
Sent: Wednesday, June 6, 2018 11:34 AM
To: cnc-list@cnc-list.com
Cc: Don Marlin
Subject: Stus-List Below deck auto pilot installation for C 40

I am starting to plan a below deck Autopilot for my C 40. I have looked below 
and it is clear that I will need to make some modifications to support a tiller 
arm. I was wondering if there are any other 40 owners who could share pictures 
of their installations. Currently I have a wheel pilot and it is good for 
motoring and light winds. Looking for something more capable.

Thanks in advance

Don Marlin

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Below deck auto pilot installation for C 40

2018-06-06 Thread Don Marlin via CnC-List 
I am starting to plan a below deck Autopilot for my C 40. I have looked
below and it is clear that I will need to make some modifications to
support a tiller arm. I was wondering if there are any other 40 owners who
could share pictures of their installations. Currently I have a wheel pilot
and it is good for motoring and light winds. Looking for something more
capable.

Thanks in advance

Don Marlin
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List water tank replacement suggestions

2018-06-06 Thread Dreuge via CnC-List 
I repaired a water tank by hot air plastic welding.  Plastic welding is pretty 
easy to learn, just get a pack of LDPE welding rods.  I initially tried G/flex 
with alcohol cleaning prep and flame treating the plastic, but it failed.  I 
had a really long crack (~1/3 tank length) along the corner edge.  After 
welding the crack, I welded on a stainless steel mesh over the region for 
structural support.  It may not have looked pretty but it has remained 
leak-free going on 4 years.

I wrote about the repair on my blog:

http://svjohannarose.blogspot.com/search/label/WaterTankRepair 


-
Paul E.
1981 C 38 Landfall 
S/V Johanna Rose
Fort Walton Beach, FL

http://svjohannarose.blogspot.com/

> On Jun 5, 2018, at 10:43 PM, cnc-list-requ...@cnc-list.com wrote:
> 
> Date: Tue, 05 Jun 2018 22:01:26 -0400
> From: bwhitmore mailto:bwhitm...@sbcglobal.net>>
> To: cnc-list@cnc-list.com 
> Subject: Re: Stus-List water tank replacement suggestions
> Message-ID:
>>
> Content-Type: text/plain; charset="utf-8"
> 
> It's also pretty easy to weld yourself.? I posted an in depth report on the 
> subject about 10 months ago.? Good skill to have in your back pocket.? I now 
> use the same approach with other cracked plastics around the house.
> 
> 
> Sent from my Verizon, Samsung Galaxy smartphone
>  Original message From: billbruce--- via CnC-List 
> mailto:cnc-list@cnc-list.com>> Date: 6/5/18  7:55 PM  
> (GMT-05:00) To: cnc-list@cnc-list.com  Cc: 
> billbr...@ns.sympatico.ca  Subject: Re: 
> Stus-List water tank replacement suggestions 
> 
> 
> 
>   I had a 6" crack plastic welded for $30 a few years back. The tank is rock 
> solid.
> 
> 
> 
> Bill Bruce
> 
> Landfall38

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray