Re: Stus-List VHB tape adhesion

[Matthew L. Wolford via CnC-List]

Yes, no acetone on the acrylic.  1/2 water; 1/2 alcohol

From: Gary Russell via CnC-List 
Sent: Friday, July 06, 2018 6:24 PM
To: C List 
Cc: Gary Russell 
Subject: Re: Stus-List VHB tape adhesion

The bond definitely gets stronger over time.  Make a small test piece (1" x 2" 
acrylic) and wait a day or two.  You shouldn't be able to pull it apart with 
your fingers.  Don't use acetone on the acrylic. 

Gary
S/V Kaylarah

~~~_/)~~



On Fri, Jul 6, 2018 at 6:05 PM, Matthew L. Wolford via CnC-List 
 wrote:

  I just finished this project using VHB tape, Corning 795, and black paint on 
the inside edge.  The windows look much faster – worth at least a half a knot.

  I made a minor mistake in the length of a piece of tape being applied to the 
window cavity.  Based on warnings that the tape never comes off, I was 
concerned that I wouldn’t be able to correct the mistake.  However, I was able 
to remove and replace the piece of tape without issue – it just peeled off.  My 
take-away is that the tape is not quite as permanent as everyone warns.  I did 
read somewhere that the bond gets stronger over time, so this may be why it was 
easy to remove when I first applied it.

  Aside from removing old butyl, filling holes and sanding to create a flat 
surface, the only other prep work I did on the window cavity was vacuuming the 
dust and wiping the surface clean with a generous amount of acetone.  This 
seemed to work fine.

  From: Mark Baldridge via CnC-List 
  Sent: Friday, July 06, 2018 4:38 PM
  To: cnc-list@cnc-list.com 
  Cc: Mark Baldridge 
  Subject: Stus-List VHB tape adhesion

  Hi All,

  I'm having the fixed windows replaced on my C 37/40+. I had fiberglass work 
done to clean up the window opening on the deck before putting the new windows 
on.
  I bought the windows from South Shore and am having them installed with 3M 
VHB tape, then Dow 795 caulking.
  The VHS tape adheres great to the windows, but not so well to the deck. There 
is 2 part epoxy primer on the window openings and it has been properly cleaned. 
A test area has been sanded and the tape doesn't appear to stick there much 
better. There is plenty of heat here in the North Carolina, so that is not the 
problem.

  Has anyone else had this issue of the tape not sticking well to the deck and 
possibly have suggestions that I can pass to the yard?

  Thanks,
  Mark Baldridge
  ~~_/)
  '89 C 37/40+ "The Edge"
  Surf City, NC


--
  ___

  Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



  ___

  Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray







___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List VHB tape adhesion

[Gary Russell via CnC-List]

The bond definitely gets stronger over time.  Make a small test piece (1" x
2" acrylic) and wait a day or two.  You shouldn't be able to pull it apart
with your fingers.  Don't use acetone on the acrylic.

Gary
S/V Kaylarah

~~~_/)~~


On Fri, Jul 6, 2018 at 6:05 PM, Matthew L. Wolford via CnC-List <
cnc-list@cnc-list.com> wrote:

> I just finished this project using VHB tape, Corning 795, and black paint
> on the inside edge.  The windows look much faster – worth at least a half a
> knot.
>
> I made a minor mistake in the length of a piece of tape being applied to
> the window cavity.  Based on warnings that the tape never comes off, I was
> concerned that I wouldn’t be able to correct the mistake.  However, I was
> able to remove and replace the piece of tape without issue – it just peeled
> off.  My take-away is that the tape is not quite as permanent as everyone
> warns.  I did read somewhere that the bond gets stronger over time, so this
> may be why it was easy to remove when I first applied it.
>
> Aside from removing old butyl, filling holes and sanding to create a flat
> surface, the only other prep work I did on the window cavity was vacuuming
> the dust and wiping the surface clean with a generous amount of acetone.
> This seemed to work fine.
>
> *From:* Mark Baldridge via CnC-List 
> *Sent:* Friday, July 06, 2018 4:38 PM
> *To:* cnc-list@cnc-list.com
> *Cc:* Mark Baldridge 
> *Subject:* Stus-List VHB tape adhesion
>
> Hi All,
>
> I'm having the fixed windows replaced on my C 37/40+. I had fiberglass
> work done to clean up the window opening on the deck before putting the new
> windows on.
> I bought the windows from South Shore and am having them installed with 3M
> VHB tape, then Dow 795 caulking.
> The VHS tape adheres great to the windows, but not so well to the deck.
> There is 2 part epoxy primer on the window openings and it has been
> properly cleaned. A test area has been sanded and the tape doesn't appear
> to stick there much better. There is plenty of heat here in the North
> Carolina, so that is not the problem.
>
> Has anyone else had this issue of the tape not sticking well to the deck
> and possibly have suggestions that I can pass to the yard?
>
> Thanks,
> Mark Baldridge
> ~~_/)
> '89 C 37/40+ "The Edge"
> Surf City, NC
>
> --
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List VHB tape adhesion

[Matthew L. Wolford via CnC-List]

I just finished this project using VHB tape, Corning 795, and black paint on 
the inside edge.  The windows look much faster – worth at least a half a knot.

I made a minor mistake in the length of a piece of tape being applied to the 
window cavity.  Based on warnings that the tape never comes off, I was 
concerned that I wouldn’t be able to correct the mistake.  However, I was able 
to remove and replace the piece of tape without issue – it just peeled off.  My 
take-away is that the tape is not quite as permanent as everyone warns.  I did 
read somewhere that the bond gets stronger over time, so this may be why it was 
easy to remove when I first applied it.

Aside from removing old butyl, filling holes and sanding to create a flat 
surface, the only other prep work I did on the window cavity was vacuuming the 
dust and wiping the surface clean with a generous amount of acetone.  This 
seemed to work fine.

From: Mark Baldridge via CnC-List 
Sent: Friday, July 06, 2018 4:38 PM
To: cnc-list@cnc-list.com 
Cc: Mark Baldridge 
Subject: Stus-List VHB tape adhesion

Hi All,

I'm having the fixed windows replaced on my C 37/40+. I had fiberglass work 
done to clean up the window opening on the deck before putting the new windows 
on.
I bought the windows from South Shore and am having them installed with 3M VHB 
tape, then Dow 795 caulking.
The VHS tape adheres great to the windows, but not so well to the deck. There 
is 2 part epoxy primer on the window openings and it has been properly cleaned. 
A test area has been sanded and the tape doesn't appear to stick there much 
better. There is plenty of heat here in the North Carolina, so that is not the 
problem.

Has anyone else had this issue of the tape not sticking well to the deck and 
possibly have suggestions that I can pass to the yard?

Thanks,
Mark Baldridge
~~_/)
'89 C 37/40+ "The Edge"
Surf City, NC




___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List VHB tape adhesion

[Gary Russell via CnC-List]

I cleaned the surface with denatured alcohol and it bonded fine.

Gary
S/V Kaylarah
'90 C 37+
East Greenwich, RI, USA

~~~_/)~~


On Fri, Jul 6, 2018 at 4:38 PM, Mark Baldridge via CnC-List <
cnc-list@cnc-list.com> wrote:

> Hi All,
>
> I'm having the fixed windows replaced on my C 37/40+. I had fiberglass
> work done to clean up the window opening on the deck before putting the new
> windows on.
> I bought the windows from South Shore and am having them installed with 3M
> VHB tape, then Dow 795 caulking.
> The VHS tape adheres great to the windows, but not so well to the deck.
> There is 2 part epoxy primer on the window openings and it has been
> properly cleaned. A test area has been sanded and the tape doesn't appear
> to stick there much better. There is plenty of heat here in the North
> Carolina, so that is not the problem.
>
> Has anyone else had this issue of the tape not sticking well to the deck
> and possibly have suggestions that I can pass to the yard?
>
> Thanks,
> Mark Baldridge
> ~~_/)
> '89 C 37/40+ "The Edge"
> Surf City, NC
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List VHB tape adhesion

[svrebeccaleah via CnC-List]

Mark, When I did my windows I didn't use a primer, just stuck the tape 
(VHB4991) straight on the rough epoxy. You might try roughing up thr primer and 
wipe with copious amounts of acetone. One thing I learned is put the windows in 
when they are cool. The plexiglass expands in sunlight by quite a bit. When it 
cools over time it will pull loose from the 795  causing leaks. Also bevel the 
edge towards the hull, and slightly round the outer edge. I also rough up the 
contact area of the plexi.Good luck


Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA.


 Original message From: Mark Baldridge via CnC-List 
 Date: 7/6/18  13:38  (GMT-08:00) To: 
cnc-list@cnc-list.com Cc: Mark Baldridge  Subject: 
Stus-List VHB tape adhesion 

Hi All,



I'm having the fixed windows replaced on my C 37/40+. I had
fiberglass work done to clean up the window opening on the deck
before putting the new windows on.

I bought the windows from South Shore and am having them installed
with 3M VHB tape, then Dow 795 caulking.

The VHS tape adheres great to the windows, but not so well to the
deck. There is 2 part epoxy primer on the window openings and it has
been properly cleaned. A test area has been sanded and the tape
doesn't appear to stick there much better. There is plenty of heat
here in the North Carolina, so that is not the problem.



Has anyone else had this issue of the tape not sticking well to the
deck and possibly have suggestions that I can pass to the yard?



Thanks,

Mark Baldridge

~~_/)

'89 C 37/40+ "The Edge"

Surf City, NC

  
  ___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List VHB tape adhesion

[Mark Baldridge via CnC-List]

Hi All,

I'm having the fixed windows replaced on my C 37/40+. I had fiberglass 
work done to clean up the window opening on the deck before putting the 
new windows on.
I bought the windows from South Shore and am having them installed with 
3M VHB tape, then Dow 795 caulking.
The VHS tape adheres great to the windows, but not so well to the deck. 
There is 2 part epoxy primer on the window openings and it has been 
properly cleaned. A test area has been sanded and the tape doesn't 
appear to stick there much better. There is plenty of heat here in the 
North Carolina, so that is not the problem.


Has anyone else had this issue of the tape not sticking well to the deck 
and possibly have suggestions that I can pass to the yard?


Thanks,
Mark Baldridge
~~_/)
'89 C 37/40+ "The Edge"
Surf City, NC
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Deck fills for landfall 38.

[John via CnC-List]

Thanks

Sent from my iPhone

> On Jul 6, 2018, at 12:11 PM, Matthew L. Wolford via CnC-List 
>  wrote:
> 
> You may find a less expensive alternative at:
> 
> http://www.marinepartdepot.com/new316ststcl2.html
> 
> -Original Message- From: John via CnC-List
> Sent: Friday, July 06, 2018 11:40 AM
> To: cnc-list@cnc-list.com
> Cc: John
> Subject: Re: Stus-List Deck fills for landfall 38.
> 
> Almost at the end of my total refit. I am looking for stainless deck 
> fills.See pictures below like the one on the left of the picture.
> 
> The deck fills have a 3-3/4 inch flange with a 1-1/2 inch hose pipe. We need 
> 3 water, 1 Diesel, and 1 waste.
> 
> 
> Thanks everyone.
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Deck fills for landfall 38.

[Matthew L. Wolford via CnC-List]

You may find a less expensive alternative at:

http://www.marinepartdepot.com/new316ststcl2.html

-Original Message- 
From: John via CnC-List

Sent: Friday, July 06, 2018 11:40 AM
To: cnc-list@cnc-list.com
Cc: John
Subject: Re: Stus-List Deck fills for landfall 38.

Almost at the end of my total refit. I am looking for stainless deck 
fills.See pictures below like the one on the left of the picture.


The deck fills have a 3-3/4 inch flange with a 1-1/2 inch hose pipe. We need 
3 water, 1 Diesel, and 1 waste.



Thanks everyone.














___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use 
PayPal to send contribution --   https://www.paypal.me/stumurray



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Deck fills for landfall 38.

[John via CnC-List]

Doug

The deck fills have a 3-3/4 inch flange with a 1-1/2 inch hose pipe. We need 3 
water, 1 Diesel, and 1 waste.



Sent from my iPhone

> On Jul 6, 2018, at 12:07 PM, svrebeccaleah via CnC-List 
>  wrote:
> 
> John,
> What is the diameter of the holes in your deck? I am replacing all of my deck 
> fills using the Seadog line on my LF39. 3 fuel, 2 water, and 2 waste. 
>  
> http://www.sea-dog.com/search?utf8=✓_string=351321-1+=0=0
> 
> 
> Doug Mountjoy 
> Rebecca Leah 
> LF39 
> Port Orchard YC, WA 
> 
> 
> 
>  Original message 
> From: John via CnC-List 
> Date: 7/6/18 08:40 (GMT-08:00)
> To: cnc-list@cnc-list.com
> Cc: John 
> Subject: Re: Stus-List Deck fills for landfall 38.
> 
> Almost at the end of my total refit. I am looking for stainless deck 
> fills.See pictures below like the one on the left of the picture. 
> 
> The deck fills have a 3-3/4 inch flange with a 1-1/2 inch hose pipe. We need 
> 3 water, 1 Diesel, and 1 waste.
> 
> 
> Thanks everyone. 
> 
> 
> 
> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Deck fills for landfall 38.

[svrebeccaleah via CnC-List]

John,What is the diameter of the holes in your deck? I am replacing all of my 
deck fills using the Seadog line on my LF39. 3 fuel, 2 water, and 2 waste.  
http://www.sea-dog.com/search?utf8=✓_string=351321-1+=0=0

Doug Mountjoy Rebecca Leah LF39 Port Orchard YC, WA 


 Original message From: John via CnC-List 
 Date: 7/6/18  08:40  (GMT-08:00) To: 
cnc-list@cnc-list.com Cc: John  Subject: Re: 
Stus-List Deck fills for landfall 38. 
Almost at the end of my total refit. I am looking for stainless deck fills.See 
pictures below like the one on the left of the picture. 

The deck fills have a 3-3/4 inch flange with a 1-1/2 inch hose pipe. We need 3 
water, 1 Diesel, and 1 waste.


Thanks everyone. 




___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Spam or worse?

[Josh Muckley via CnC-List]

Allen apologized and stated that he may have been hacked.  Tom you gotta
start living a little!  I clicked on both links just for kicks!    I got
http errors and didn't attempt any further.

Josh



On Fri, Jul 6, 2018, 10:51 AM Tom Buscaglia via CnC-List <
cnc-list@cnc-list.com> wrote:

> I’m not clicking this.  Did Allen get hacked or what.
>
> Sure looks like a trap to me!
>
> Tom Buscaglia
> S/V Alera
> 1990 C 37+/40
> Vashon WA
> P 206.463.9200
> C 305.409.3660
>
>
> On Jul 6, 2018, at 2:31 AM, cnc-list-requ...@cnc-list.com wrote:
>
> Message: 6
> Date: Fri, 6 Jul 2018 00:12:39 -0500
> From: Allan Rheaume 
> To: Allan , cnc list
>, McNamee, Michael ,
>yr photos 
> Subject: Re: Stus-List (no subject)
> Message-ID: <1530853966.bJ30fwkWqwapxbJ30fBuNK@mf-smf-ucb030c3>
> Content-Type: text/plain; charset="utf-8"
>
>
> http://have.thesportsbrandingagency.com
>
> Allan Rheaume
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Info posting

[Josh Muckley via CnC-List]

Glenn, IIRC your request is not possible since everything goes to an
archive site.  It will be interesting to see what Stu says.

Josh Muckley
S/V Sea Hawk
1989 C 37+
Solomons, MD



On Fri, Jul 6, 2018, 9:01 AM Glenn Gambel via CnC-List <
cnc-list@cnc-list.com> wrote:

> Stu
>
> I accidentally put my information, name, address, and phone number in a
> message I intended to sent privately to Allen Hutton in Australia.  Could
> you remove that posting.
> Thank you.  Also if you send me your address via my private e-mail, I
> would like to make a donation to the list via check.
>
> Glenn Gambel
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Deck fills for landfall 38.

[Frederick G Street via CnC-List]

Or this:

https://www.defender.com/product.jsp?path=-1%7C7504%7C2290180%7C2290181=3744792
 

— Fred

Fred Street -- Minneapolis
S/V Oceanis (1979 C Landfall 38) -- Bayfield, WI

> On Jul 6, 2018, at 10:42 AM, Frederick G Street via CnC-List 
>  wrote:
> 
> John — try this:
> 
> http://www.sea-dog.com/groups/564-hose-deck-fill 
> 
> 
> — Fred
> 
> Fred Street -- Minneapolis
> S/V Oceanis (1979 C Landfall 38) -- Bayfield, WI
> 
>> On Jul 6, 2018, at 10:40 AM, John via CnC-List > > wrote:
>> 
>> Almost at the end of my total refit. I am looking for stainless deck 
>> fills.See pictures below like the one on the left of the picture. 
>> 
>> The deck fills have a 3-3/4 inch flange with a 1-1/2 inch hose pipe. We need 
>> 3 water, 1 Diesel, and 1 waste.
>> 
>> 
>> Thanks everyone.
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Deck fills for landfall 38.

[John via CnC-List]

Awesome, Thanks Fred. 



Sent from my iPhone

> On Jul 6, 2018, at 11:42 AM, Frederick G Street via CnC-List 
>  wrote:
> 
> John — try this:
> 
> http://www.sea-dog.com/groups/564-hose-deck-fill
> 
> — Fred
> 
> Fred Street -- Minneapolis
> S/V Oceanis (1979 C Landfall 38) -- Bayfield, WI
> 
>> On Jul 6, 2018, at 10:40 AM, John via CnC-List  wrote:
>> 
>> Almost at the end of my total refit. I am looking for stainless deck 
>> fills.See pictures below like the one on the left of the picture. 
>> 
>> The deck fills have a 3-3/4 inch flange with a 1-1/2 inch hose pipe. We need 
>> 3 water, 1 Diesel, and 1 waste.
>> 
>> 
>> Thanks everyone.
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Deck fills for landfall 38.

[Frederick G Street via CnC-List]

John — try this:

http://www.sea-dog.com/groups/564-hose-deck-fill 


— Fred

Fred Street -- Minneapolis
S/V Oceanis (1979 C Landfall 38) -- Bayfield, WI

> On Jul 6, 2018, at 10:40 AM, John via CnC-List  wrote:
> 
> Almost at the end of my total refit. I am looking for stainless deck 
> fills.See pictures below like the one on the left of the picture. 
> 
> The deck fills have a 3-3/4 inch flange with a 1-1/2 inch hose pipe. We need 
> 3 water, 1 Diesel, and 1 waste.
> 
> 
> Thanks everyone.
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Deck fills for landfall 38.

[John via CnC-List]

Almost at the end of my total refit. I am looking for stainless deck fills.See 
pictures below like the one on the left of the picture. 

The deck fills have a 3-3/4 inch flange with a 1-1/2 inch hose pipe. We need 3 
water, 1 Diesel, and 1 waste.


Thanks everyone. 


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Spam or worse?

[Tom Buscaglia via CnC-List]

Pierre too?  Or maybe he clicked on that link.

Tom Buscaglia
S/V Alera 
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660


> On Jul 6, 2018, at 2:31 AM, cnc-list-requ...@cnc-list.com wrote:
> 
> Message: 7
> Date: Thu, 5 Jul 2018 19:17:54 -1000
> From: Pierre Tremblay 
> To: Artemano , Cheryl , cnc
>list , GForce , custserv
>
> Subject: Re: Stus-List (no subject)
> Message-ID: <1530854283.bJ85fG1nrXAJnbJ87fG3QI@mf-smf-ucb036c2>
> Content-Type: text/plain; charset="utf-8"
> 
> 
> http://superb.kcmaps.com
> 
> Pierre Tremblay
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Spam or worse?

[Tom Buscaglia via CnC-List]

I’m not clicking this.  Did Allen get hacked or what.  

Sure looks like a trap to me!

Tom Buscaglia
S/V Alera 
1990 C 37+/40
Vashon WA
P 206.463.9200
C 305.409.3660


> On Jul 6, 2018, at 2:31 AM, cnc-list-requ...@cnc-list.com wrote:
> 
> Message: 6
> Date: Fri, 6 Jul 2018 00:12:39 -0500
> From: Allan Rheaume 
> To: Allan , cnc list
>, McNamee, Michael ,
>yr photos 
> Subject: Re: Stus-List (no subject)
> Message-ID: <1530853966.bJ30fwkWqwapxbJ30fBuNK@mf-smf-ucb030c3>
> Content-Type: text/plain; charset="utf-8"
> 
> 
> http://have.thesportsbrandingagency.com
> 
> Allan Rheaume
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Info posting

[Glenn Gambel via CnC-List]

Stu

I accidentally put my information, name, address, and phone number in a 
message I intended to sent privately to Allen Hutton in Australia.  
Could you remove that posting.
Thank you.  Also if you send me your address via my private e-mail, I 
would like to make a donation to the list via check.


Glenn Gambel___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Fw: Landfall 38 - OSR compliance ?

[David via CnC-List]

Contact US Sailing.  They probably have data.


David F. Risch, J. D.

Gulf Stream Associates, LLC

(401) 419-4650



From: CnC-List  on behalf of john sandford via 
CnC-List 
Sent: Thursday, July 5, 2018 9:10 PM
To: cnc-list@cnc-list.com
Cc: john sandford
Subject: Stus-List Landfall 38 - OSR compliance ?


I am researching the ability of my LF 38, to comply with the World Sailing 
Offshore Special Regulations Cat 1, and would appreciate any feedback.

Most of it looks straight forward, and first checks show the boat complies, and 
may even have been built with some of these in mind. Cockpit volume, Hatches, 
etc.

However, I got stumped in the section with; stability calculations, ORC rating, 
etc.

It would be easier if someone has prior history that they could share, hence 
the post.



Here is what OSR says for Stability:



3.04

Stability

-

Monohulls

3.04.1 Able to demonstrate compliance with ISO12217-2* design category A or 
higher, either by EC Recreational Craft Directive certification having obtained 
the CE mark or the designer’s declaration * The latest effective version of 
ISO12217-2 should be used unless the boat was already designed to a previous

version

3.04.2 Where compliance in accordance with 3.04.1 cannot be demonstrated, able 
to demonstrate either:

a) i a STIXvalue not less than 32; and

ii AVS not less than 130 -0.002*m, but always >= 100°, (where “m” is the mass 
of the boat in the minimum operating condition as defined by ISO12217-2); and 
iii a minimum righting energy m*AGZ>172000 (where AGZ is the positive area 
under the righting lever curve in the minimum operating condition, expressed in 
kg metre degrees from upright to AVS); or

b) Stability Index in ORC Rating System of not less than 110; or

c) IRC SSS Base value of not less than 28



Yes I am stumped !



I know that Rick Knowles, “INDIGO” did the HFX/Marblehead race which (today 
anyway) requires the above.



Any help would be greatly appreciated.

Thank you

John




___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Hacked Emails

[Stu via CnC-List]

Our email list has NOT been hacked.  Email addresses from large providers such 
as GMail, Yahoo, and others do get hacked on a regular basis and it looks like 
a couple of our subscribers may have been hit.

There is not a lot you can do to prevent this happening but it is recommended 
that you change your email password on a regular basis.

If you receive any type of suspicious email (like the two today), do not click 
on any links – just delete the message.

Stu

---
This email has been checked for viruses by AVG.
https://www.avg.com
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Hacked

[Allan Rheaume via CnC-List]

 

       Looks like both my address and that of Pierre Tremblay 
have been hacked. I sold my 30-2 last year but I still read most of the posts 
on the list. Can list administrator instruct me on how I can rectify this?

  Thanks,Al Rheaumeformerly Drumroll 30-2
  
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray

  ___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray