Re: Stus-List Anyone have a prop?

[schiller via CnC-List]

Chuck,

I see from you area codes that you are here in Michigan.  Give Torresen 
Marine a call to see if they might have a used Campbell Sailor or 
Michigan Wheel prop laying around.  We used them to repower our Redwing 
35 way back when.


Neil Schiller
1983 C&C 35-3, #028, "Grace"
Whitehall, Michigan
WLYC

On 5/27/2019 9:32 PM, Chuck Saur via CnC-List wrote:
Hello listers...anyone have a fixed three blade propeller,  16x9 RH 
for a 1 1/8 shaft?
It's for my 37+ who has a problem with the Max Prop that is currently 
installed.  I want to get a quick solution, and use the fixed blade 
for this year, while I send the MaxProp for reconditioning.
Just hoping someone has a fixed prop languishing in their garage and 
would either sell or loan for a year!!!  Anyone help?  Boat is out of 
commission until I secure a solution!  Thanks!

*
*
*
*

*Chuck Saur*

*Board Chair *

*
Olivia's Gift
*517 490-5926 Cell

616 977-5766 Fax
www.oliviasgift.org 

OG logo


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Oft overlooked source of head odor

[bwhitmore via CnC-List]

Ok, makes sense.Bruce Whitmore 
null___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Anyone have a prop?

[Dennis C. via CnC-List]

There’s a 14x9 on eBay for $310. A few other 1 1/8 RH props as well. Grab one, 
use it, sell it. 

Dennis C.

Sent from my iPhone

> On May 27, 2019, at 8:32 PM, Chuck Saur via CnC-List  
> wrote:
> 
> Hello listers...anyone have a fixed three blade propeller,  16x9 RH for a 1 
> 1/8 shaft?  
> It's for my 37+ who has a problem with the Max Prop that is currently 
> installed.  I want to get a quick solution, and use the fixed blade for this 
> year, while I send the MaxProp for reconditioning.
> Just hoping someone has a fixed prop languishing in their garage and would 
> either sell or loan for a year!!!  Anyone help?  Boat is out of commission 
> until I secure a solution!  Thanks!
> 
> 
> Chuck Saur
> 
> Board Chair  
> 
> 
> Olivia's Gift
> 517 490-5926 Cell
> 
> 616 977-5766 Fax
> www.oliviasgift.org
> 
>  
> 
> 
> 
>  
> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Propane Solenoid

[David Risch via CnC-List]

No response from stove so assume it's the ancient solenoid.  Anybody know if we 
are ¼ or 3/8 hose size for the three burner oven to replace same?

Thanks in advance.

David F. Risch
Gulf Stream Associates
(401) 419-4650

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Prop strut

[Gerald Fennessey via CnC-List]

Hi 
I have a 1985 C&C 35 MK 3 with a very bent prop strut.Talked to Accutech this 
am, the company that made the strutis out of business and it could take as long 
as ten weeks to get anew one cast.If anyone out there knows of a new or used 
strut for this boatplease let me know.Sailing on the hard will not be a fun 
summer.
ThanksGerry FennesseyFianna1985 C&C MK39788521424___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Anyone have a prop?

[George Cone via CnC-List]

I have a fixed 16 x 9 two blade that came off my 81 – 40, it does have a 1 
1/8th taper I believe,

Will that help?
Thanks,
George
1981 C&C 40
Burlington, VT

From: CnC-List  On Behalf Of schiller via 
CnC-List
Sent: Tuesday, May 28, 2019 7:46 AM
To: cnc-list@cnc-list.com
Cc: schiller 
Subject: Re: Stus-List Anyone have a prop?

Chuck,

I see from you area codes that you are here in Michigan.  Give Torresen Marine 
a call to see if they might have a used Campbell Sailor or Michigan Wheel prop 
laying around.  We used them to repower our Redwing 35 way back when.

Neil Schiller
1983 C&C 35-3, #028, "Grace"
Whitehall, Michigan
WLYC
On 5/27/2019 9:32 PM, Chuck Saur via CnC-List wrote:
Hello listers...anyone have a fixed three blade propeller,  16x9 RH for a 1 1/8 
shaft?
It's for my 37+ who has a problem with the Max Prop that is currently 
installed.  I want to get a quick solution, and use the fixed blade for this 
year, while I send the MaxProp for reconditioning.
Just hoping someone has a fixed prop languishing in their garage and would 
either sell or loan for a year!!!  Anyone help?  Boat is out of commission 
until I secure a solution!  Thanks!


Chuck Saur
Board Chair

Olivia's Gift
517 490-5926 Cell
616 977-5766 Fax
www.oliviasgift.org

[OG logo]




___



Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Prop strut

[Paul Fountain via CnC-List]

Try Buck Algonquin: 
https://catalog.hydrasearchrecreational.com/category/struts-1

From: CnC-List  On Behalf Of Gerald Fennessey 
via CnC-List
Sent: May 28, 2019 9:27 AM
To: cnc-list@cnc-list.com
Cc: Gerald Fennessey 
Subject: Stus-List Prop strut

Hi

I have a 1985 C&C 35 MK 3 with a very bent prop strut.
Talked to Accutech this am, the company that made the strut
is out of business and it could take as long as ten weeks to get a
new one cast.
If anyone out there knows of a new or used strut for this boat
please let me know.
Sailing on the hard will not be a fun summer.

Thanks
Gerry Fennessey
Fianna
1985 C&C MK3
9788521424
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Prop strut

[Hoyt, Mike via CnC-List]

Hi Gerry

Is it possible to straighten the strut?

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gerald 
Fennessey via CnC-List
Sent: Tuesday, May 28, 2019 10:27 AM
To: cnc-list@cnc-list.com
Cc: Gerald Fennessey
Subject: Stus-List Prop strut

Hi

I have a 1985 C&C 35 MK 3 with a very bent prop strut.
Talked to Accutech this am, the company that made the strut
is out of business and it could take as long as ten weeks to get a
new one cast.
If anyone out there knows of a new or used strut for this boat
please let me know.
Sailing on the hard will not be a fun summer.

Thanks
Gerry Fennessey
Fianna
1985 C&C MK3
9788521424
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Prop strut

[Gerald Fennessey via CnC-List]

No, you would have to use heat, which would make the metal brittle.Its the base 
of the strut that is bent, which makes bending it back into shape very 
difficult and not very accurate. 


-Original Message-
From: Hoyt, Mike via CnC-List 
To: cnc-list@cnc-list.com 
Cc: Hoyt, Mike 
Sent: Tue, May 28, 2019 10:24 am
Subject: Re: Stus-List Prop strut

#yiv0796819753 #yiv0796819753 -- _filtered #yiv0796819753 {panose-1:2 4 5 3 5 4 
6 3 2 4;} _filtered #yiv0796819753 {font-family:Calibri;panose-1:2 15 5 2 2 2 4 
3 2 4;} _filtered #yiv0796819753 {font-family:Tahoma;panose-1:2 11 6 4 3 5 4 4 
2 4;} #yiv0796819753 #yiv0796819753 p.yiv0796819753MsoNormal, #yiv0796819753 
li.yiv0796819753MsoNormal, #yiv0796819753 div.yiv0796819753MsoNormal 
{margin:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:New;} 
#yiv0796819753 a:link, #yiv0796819753 span.yiv0796819753MsoHyperlink 
{color:blue;text-decoration:underline;} #yiv0796819753 a:visited, 
#yiv0796819753 span.yiv0796819753MsoHyperlinkFollowed 
{color:purple;text-decoration:underline;} #yiv0796819753 
span.yiv0796819753EmailStyle17 {color:#1F497D;} #yiv0796819753 
.yiv0796819753MsoChpDefault {} _filtered #yiv0796819753 {margin:1.0in 1.0in 
1.0in 1.0in;} #yiv0796819753 div.yiv0796819753WordSection1 {} #yiv0796819753 Hi 
Gerry    Is it possible to straighten the strut?    From: CnC-List 
[mailto:cnc-list-boun...@cnc-list.com]On Behalf Of Gerald Fennessey via CnC-List
Sent: Tuesday, May 28, 2019 10:27 AM
To: cnc-list@cnc-list.com
Cc: Gerald Fennessey
Subject: Stus-List Prop strut    Hi     I have a 1985 C&C 35 MK 3 with a very 
bent prop strut. Talked to Accutech this am, the company that made the strut is 
out of business and it could take as long as ten weeks to get a new one cast. 
If anyone out there knows of a new or used strut for this boat please let me 
know. Sailing on the hard will not be a fun summer.    Thanks Gerry Fennessey 
Fianna 1985 C&C MK3 9788521424 ___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Propane Solenoid

[Nathan Post via CnC-List]

Mine was 1/4 inch fittings if I remember correctly. Also when I had that 
problem I found that my solenoid was fine - the pressure regulator was shot and 
no longer let gas through so I suggest checking that first.  Disconnect hose 
before the solenoid and see if gas will flow through it. 

Also check if you have voltage at the solenoid - it could be a wiring or 
breaker fault. The solenoid should get warm to the touch when on. 

- -
Nathan Post
S/V Wisper C&C 34
Lynn MA USA

> On May 28, 2019, at 9:15 AM, David Risch via CnC-List  
> wrote:
> 
> No response from stove so assume it’s the ancient solenoid.  Anybody know if 
> we are ¼ or 3/8 hose size for the three burner oven to replace same?
>  
> Thanks in advance.
>  
> David F. Risch
> Gulf Stream Associates
> (401) 419-4650
>  
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Prop strut

[Jerome Tauber via CnC-List]

Hunter OEM Parts

Hunter prop struts and shafts
Everything you need for your power train
 
BUY NOW
 

Sent from my iPhone

> On May 28, 2019, at 10:42 AM, Gerald Fennessey via CnC-List 
>  wrote:
> 
> No, you would have to use heat, which would make the metal brittle.
> Its the base of the strut that is bent, which makes bending it back into shape
>  very difficult and not very accurate. 
> 
> 
> -Original Message-
> From: Hoyt, Mike via CnC-List 
> To: cnc-list@cnc-list.com 
> Cc: Hoyt, Mike 
> Sent: Tue, May 28, 2019 10:24 am
> Subject: Re: Stus-List Prop strut
> 
> Hi Gerry
>  
> Is it possible to straighten the strut?
>  
> From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gerald 
> Fennessey via CnC-List
> Sent: Tuesday, May 28, 2019 10:27 AM
> To: cnc-list@cnc-list.com
> Cc: Gerald Fennessey
> Subject: Stus-List Prop strut
>  
> Hi 
>  
> I have a 1985 C&C 35 MK 3 with a very bent prop strut.
> Talked to Accutech this am, the company that made the strut
> is out of business and it could take as long as ten weeks to get a
> new one cast.
> If anyone out there knows of a new or used strut for this boat
> please let me know.
> Sailing on the hard will not be a fun summer.
>  
> Thanks
> Gerry Fennessey
> Fianna
> 1985 C&C MK3
> 9788521424
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --  https://www.paypal.me/stumurray
> 
> ___
> 
> Thanks everyone for supporting this list with your contributions.  Each and 
> every one is greatly appreciated.  If you want to support the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray
> 
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Prop strut

[Hoyt, Mike via CnC-List]

Hi Gerry

I believe a lot of the boats have the strut mounted with shims, etc…  Can the 
mount be changed to work with your existing strut to reset the allignmnt?  
Might involve a bit of glass work but overall not a huge job

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gerald 
Fennessey via CnC-List
Sent: Tuesday, May 28, 2019 11:43 AM
To: cnc-list@cnc-list.com
Cc: Gerald Fennessey
Subject: Re: Stus-List Prop strut

No, you would have to use heat, which would make the metal brittle.
Its the base of the strut that is bent, which makes bending it back into shape
 very difficult and not very accurate.

-Original Message-
From: Hoyt, Mike via CnC-List 
To: cnc-list@cnc-list.com 
Cc: Hoyt, Mike 
Sent: Tue, May 28, 2019 10:24 am
Subject: Re: Stus-List Prop strut
Hi Gerry

Is it possible to straighten the strut?

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Gerald 
Fennessey via CnC-List
Sent: Tuesday, May 28, 2019 10:27 AM
To: cnc-list@cnc-list.com
Cc: Gerald Fennessey
Subject: Stus-List Prop strut

Hi

I have a 1985 C&C 35 MK 3 with a very bent prop strut.
Talked to Accutech this am, the company that made the strut
is out of business and it could take as long as ten weeks to get a
new one cast.
If anyone out there knows of a new or used strut for this boat
please let me know.
Sailing on the hard will not be a fun summer.

Thanks
Gerry Fennessey
Fianna
1985 C&C MK3
9788521424
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --  https://www.paypal.me/stumurray
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Prop strut

[Jim Watts via CnC-List]

When the strut got busted on our 29-2, a local machinist made one from
stainless to replace it in a couple of days.

Jim Watts
Paradigm Shift
C&C 35 Mk III
Victoria, BC


On Tue, 28 May 2019 at 09:32, Hoyt, Mike via CnC-List 
wrote:

> Hi Gerry
>
>
>
> I believe a lot of the boats have the strut mounted with shims, etc…  Can
> the mount be changed to work with your existing strut to reset the
> allignmnt?  Might involve a bit of glass work but overall not a huge job
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Gerald
> Fennessey via CnC-List
> *Sent:* Tuesday, May 28, 2019 11:43 AM
> *To:* cnc-list@cnc-list.com
> *Cc:* Gerald Fennessey
> *Subject:* Re: Stus-List Prop strut
>
>
>
> No, you would have to use heat, which would make the metal brittle.
>
> Its the base of the strut that is bent, which makes bending it back into
> shape
>
>  very difficult and not very accurate.
>
> -Original Message-
> From: Hoyt, Mike via CnC-List 
> To: cnc-list@cnc-list.com 
> Cc: Hoyt, Mike 
> Sent: Tue, May 28, 2019 10:24 am
> Subject: Re: Stus-List Prop strut
>
> Hi Gerry
>
>
>
> Is it possible to straighten the strut?
>
>
>
> *From:* CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of *Gerald
> Fennessey via CnC-List
> *Sent:* Tuesday, May 28, 2019 10:27 AM
> *To:* cnc-list@cnc-list.com
> *Cc:* Gerald Fennessey
> *Subject:* Stus-List Prop strut
>
>
>
> Hi
>
>
>
> I have a 1985 C&C 35 MK 3 with a very bent prop strut.
>
> Talked to Accutech this am, the company that made the strut
>
> is out of business and it could take as long as ten weeks to get a
>
> new one cast.
>
> If anyone out there knows of a new or used strut for this boat
>
> please let me know.
>
> Sailing on the hard will not be a fun summer.
>
>
>
> Thanks
>
> Gerry Fennessey
>
> Fianna
>
> 1985 C&C MK3
>
> 9788521424
>
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --  https://www.paypal.me/stumurray
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Anyone have a prop?

[sv Rebecca Leah via CnC-List]

Alan, How long did it take to get your Max prop refurbished? I need to do mine 
and am debating whether to do it know or wait till winter. Doug Mountjoy Sv 
Rebecca Leah C&C LF39253-208-1412Port Orchard YC wa.
 Original message From: ALAN BERGEN via CnC-List 
 Date: 5/27/19  20:32  (GMT-08:00) To: C&C 
 Cc: ALAN BERGEN  Subject: Re: 
Stus-List Anyone have a prop? I recently had my three blade Max-prop 
refurbished. My engine was running rough, so I thought it might have been the 
cutless bearing. While the boat was out of the water for bottom paint, the yard 
noticed the prop blades were wobbly and the shaft was worn, in addition to the 
worn cutless bearing. The prop was sent back for refurbishing ( It came back 
looking like a brand new prop.), a new shaft was machined and a new cutless 
bearing was installed. The crew and I noticed a significant difference in how 
smooth the engine runs, and I get more boat speed than before the work was 
done.Alan Bergen35 Mk III ThirstyRose City YCPortland, OROn Mon, May 27, 2019 
at 7:41 PM Josh Muckley via CnC-List  wrote:Could you 
describe the problem you are experiencing with your prop?  I want to be on 
guard for problems with mine.Have you talked to Hutch at PYI (Max Prop)?  He 
may be able to help you with minimizing the out of service time.Josh Muckley 
S/V Sea Hawk 1989 C&C 37+Solomons, MDOn Mon, May 27, 2019, 9:33 PM Chuck Saur 
via CnC-List  wrote:Hello listers...anyone have a fixed 
three blade propeller,  16x9 RH for a 1 1/8 shaft?  It's for my 37+ who has a 
problem with the Max Prop that is currently installed.  I want to get a quick 
solution, and use the fixed blade for this year, while I send the MaxProp for 
reconditioning.Just hoping someone has a fixed prop languishing in their garage 
and would either sell or loan for a year!!!  Anyone help?  Boat is out of 
commission until I secure a solution!  Thanks!    Chuck SaurBoard Chair  
Olivia's Gift517 490-5926 Cell616 977-5766 Faxwww.oliviasgift.org  
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=vDBGXwiD31tsJ2O1z1PnHim92Ost62N942Hx3HXx89M&s=DEohROPv_vPE1DzwwPg4SQqYDlqMtX9pBUSGFp3eoYI&e=


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Anyone have a prop?

[detroito91 via CnC-List]

Mine took 3 weeks total. One week there, 2 days refinishing,  and one week 
back. They will give accurate times as they know the work schedule.  Looked and 
performed as a brand new one.Jim Schwartz SEA YA !38 landfall Washington nc 
Sent from my Verizon, Samsung Galaxy smartphone
 Original message From: sv Rebecca Leah via CnC-List 
 Date: 5/28/19  2:09 PM  (GMT-04:00) To: 
cnc-list@cnc-list.com Cc: sv Rebecca Leah  Subject: 
Re: Stus-List Anyone have a prop? Alan, How long did it take to get your Max 
prop refurbished? I need to do mine and am debating whether to do it know or 
wait till winter. Doug Mountjoy Sv Rebecca Leah C&C LF39253-208-1412Port 
Orchard YC wa. Original message From: ALAN BERGEN via CnC-List 
 Date: 5/27/19  20:32  (GMT-08:00) To: C&C 
 Cc: ALAN BERGEN  Subject: Re: 
Stus-List Anyone have a prop? I recently had my three blade Max-prop 
refurbished. My engine was running rough, so I thought it might have been the 
cutless bearing. While the boat was out of the water for bottom paint, the yard 
noticed the prop blades were wobbly and the shaft was worn, in addition to the 
worn cutless bearing. The prop was sent back for refurbishing ( It came back 
looking like a brand new prop.), a new shaft was machined and a new cutless 
bearing was installed. The crew and I noticed a significant difference in how 
smooth the engine runs, and I get more boat speed than before the work was 
done.Alan Bergen35 Mk III ThirstyRose City YCPortland, OROn Mon, May 27, 2019 
at 7:41 PM Josh Muckley via CnC-List  wrote:Could you 
describe the problem you are experiencing with your prop?  I want to be on 
guard for problems with mine.Have you talked to Hutch at PYI (Max Prop)?  He 
may be able to help you with minimizing the out of service time.Josh Muckley 
S/V Sea Hawk 1989 C&C 37+Solomons, MDOn Mon, May 27, 2019, 9:33 PM Chuck Saur 
via CnC-List  wrote:Hello listers...anyone have a fixed 
three blade propeller,  16x9 RH for a 1 1/8 shaft?  It's for my 37+ who has a 
problem with the Max Prop that is currently installed.  I want to get a quick 
solution, and use the fixed blade for this year, while I send the MaxProp for 
reconditioning.Just hoping someone has a fixed prop languishing in their garage 
and would either sell or loan for a year!!!  Anyone help?  Boat is out of 
commission until I secure a solution!  Thanks!    Chuck SaurBoard Chair  
Olivia's Gift517 490-5926 Cell616 977-5766 Faxwww.oliviasgift.org  
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   
https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=vDBGXwiD31tsJ2O1z1PnHim92Ost62N942Hx3HXx89M&s=DEohROPv_vPE1DzwwPg4SQqYDlqMtX9pBUSGFp3eoYI&e=


___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List USCG documentation renewal scam - again

[Dennis C. via CnC-List]

Well, it's that time of year.  I got my annual notice from "Maritime
Documentation Center", Billings, Montana.

For any owners new to this list, this notice always brings a chuckle to
many of us.  Maritime Documentation Center is NOT the USCG Vessel
Documentation Center (VDC).  It is a private third party entity who will
file your renewal for you for what many of us consider an exorbitant fee.

They are always consistent about sending their notice out quite a bit
BEFORE the USCG sends you the official renewal notice.  Simply wait until
you receive the official notice from the USCG VDC and then go online and
renew for $26.  You'll save a few $$$ that you can spend on a new boat toy.

Dennis C.
Touche' 35-1 #83
Mandeville, LA
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List USCG documentation renewal scam - again

[Neil Andersen via CnC-List]

For the record, the USCG Documentation Center is in West Virginia.  Go figure...

Neil
1982 C&C 32 FoxFire
Rock Hall, MD

Neil Andersen
20691 Jamieson Rd
Rock Hall, MD 21661


From: CnC-List  on behalf of Dennis C. via 
CnC-List 
Sent: Tuesday, May 28, 2019 5:11 PM
To: CnClist
Cc: Dennis C.
Subject: Stus-List USCG documentation renewal scam - again

Well, it's that time of year.  I got my annual notice from "Maritime 
Documentation Center", Billings, Montana.

For any owners new to this list, this notice always brings a chuckle to many of 
us.  Maritime Documentation Center is NOT the USCG Vessel Documentation Center 
(VDC).  It is a private third party entity who will file your renewal for you 
for what many of us consider an exorbitant fee.

They are always consistent about sending their notice out quite a bit BEFORE 
the USCG sends you the official renewal notice.  Simply wait until you receive 
the official notice from the USCG VDC and then go online and renew for $26.  
You'll save a few $$$ that you can spend on a new boat toy.

Dennis C.
Touche' 35-1 #83
Mandeville, LA
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List Anyone have a prop?

[ALAN BERGEN via CnC-List]

Doug: I don't know when the yard sent the prop to PYI. Why not call them
and ask? You might ask whether they could expedite the refurbishing.
425-355-3669  i...@pyiinc.com  web: www.pyiinc.com.

On Tue, May 28, 2019 at 11:09 AM sv Rebecca Leah via CnC-List <
cnc-list@cnc-list.com> wrote:

> Alan,
> How long did it take to get your Max prop refurbished? I need to do mine
> and am debating whether to do it know or wait till winter.
>
>
>
> Doug Mountjoy
> Sv Rebecca Leah
> C&C LF39
> 253-208-1412
> Port Orchard YC wa.
>
>  Original message 
> From: ALAN BERGEN via CnC-List 
> Date: 5/27/19 20:32 (GMT-08:00)
> To: C&C 
> Cc: ALAN BERGEN 
> Subject: Re: Stus-List Anyone have a prop?
>
> I recently had my three blade Max-prop refurbished. My engine was running
> rough, so I thought it might have been the cutless bearing. While the boat
> was out of the water for bottom paint, the yard noticed the prop blades
> were wobbly and the shaft was worn, in addition to the worn cutless
> bearing. The prop was sent back for refurbishing ( It came back looking
> like a brand new prop.), a new shaft was machined and a new cutless bearing
> was installed. The crew and I noticed a significant difference in how
> smooth the engine runs, and I get more boat speed than before the work was
> done.
>
> Alan Bergen
> 35 Mk III Thirsty
> Rose City YC
> Portland, OR
>
> On Mon, May 27, 2019 at 7:41 PM Josh Muckley via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> Could you describe the problem you are experiencing with your prop?  I
>> want to be on guard for problems with mine.
>>
>> Have you talked to Hutch at PYI (Max Prop)?  He may be able to help you
>> with minimizing the out of service time.
>>
>> Josh Muckley
>> S/V Sea Hawk
>> 1989 C&C 37+
>> Solomons, MD
>>
>>
>>
>> On Mon, May 27, 2019, 9:33 PM Chuck Saur via CnC-List <
>> cnc-list@cnc-list.com> wrote:
>>
>>> Hello listers...anyone have a fixed three blade propeller,  16x9 RH for
>>> a 1 1/8 shaft?
>>> It's for my 37+ who has a problem with the Max Prop that is currently
>>> installed.  I want to get a quick solution, and use the fixed blade for
>>> this year, while I send the MaxProp for reconditioning.
>>> Just hoping someone has a fixed prop languishing in their garage and
>>> would either sell or loan for a year!!!  Anyone help?  Boat is out of
>>> commission until I secure a solution!  Thanks!
>>>
>>>
>>> *Chuck Saur*
>>>
>>> *Board Chair  *
>>>
>>>
>>>
>>> *Olivia's Gift*517 490-5926 Cell
>>>
>>> 616 977-5766 Fax
>>> www.oliviasgift.org
>>> 
>>>
>>>
>>>
>>> [image: OG logo]
>>>
>>>
>>> ___
>>>
>>> Thanks everyone for supporting this list with your contributions.  Each
>>> and every one is greatly appreciated.  If you want to support the list -
>>> use PayPal to send contribution --   https://www.paypal.me/stumurray
>>> 
>>>
>>> ___
>>
>> Thanks everyone for supporting this list with your contributions.  Each
>> and every one is greatly appreciated.  If you want to support the list -
>> use PayPal to send contribution --
>> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=vDBGXwiD31tsJ2O1z1PnHim92Ost62N942Hx3HXx89M&s=DEohROPv_vPE1DzwwPg4SQqYDlqMtX9pBUSGFp3eoYI&e=
>>
>> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --
> https://urldefense.proofpoint.com/v2/url?u=https-3A__www.paypal.me_stumurray&d=DwICAg&c=clK7kQUTWtAVEOVIgvi0NU5BOUHhpN0H8p7CSfnc_gI&r=9w3G7Cf8YfQnrjmtuNxwDJYr3JMv9f1pAfgAJ9xXYQQ&m=sxe52Ym2EHe9cgyluSCvrjrDI2UZ9iwrZoEAS5cMLcw&s=fTOxs-R-A2uPwhgdfyc5Ru6HNXiyCmoOnzSqSYyHfTA&e=
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List USCG documentation renewal scam - again

[Edward Levert via CnC-List]

In a bit of protest, I marked the notice of the Maritime Documentation
Center "Return to Sender". Let them throw it away!

Ed Levert
C&C 34 Briar Patch
New Orleans, La

On Tue, May 28, 2019 at 4:28 PM Neil Andersen via CnC-List <
cnc-list@cnc-list.com> wrote:

> For the record, the USCG Documentation Center is in West Virginia.  Go
> figure...
>
> Neil
> 1982 C&C 32 FoxFire
> Rock Hall, MD
>
> Neil Andersen
> 20691 Jamieson Rd
> Rock Hall, MD 21661
>
> --
> *From:* CnC-List  on behalf of Dennis C.
> via CnC-List 
> *Sent:* Tuesday, May 28, 2019 5:11 PM
> *To:* CnClist
> *Cc:* Dennis C.
> *Subject:* Stus-List USCG documentation renewal scam - again
>
> Well, it's that time of year.  I got my annual notice from "Maritime
> Documentation Center", Billings, Montana.
>
> For any owners new to this list, this notice always brings a chuckle to
> many of us.  Maritime Documentation Center is NOT the USCG Vessel
> Documentation Center (VDC).  It is a private third party entity who will
> file your renewal for you for what many of us consider an exorbitant fee.
>
> They are always consistent about sending their notice out quite a bit
> BEFORE the USCG sends you the official renewal notice.  Simply wait until
> you receive the official notice from the USCG VDC and then go online and
> renew for $26.  You'll save a few $$$ that you can spend on a new boat toy.
>
> Dennis C.
> Touche' 35-1 #83
> Mandeville, LA
> ___
>
> Thanks everyone for supporting this list with your contributions.  Each
> and every one is greatly appreciated.  If you want to support the list -
> use PayPal to send contribution --   https://www.paypal.me/stumurray
>
>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Re: Stus-List USCG documentation renewal scam - again

[Neil Andersen via CnC-List]

Good.

Neil Andersen
20691 Jamieson Rd
Rock Hall, MD 21661

From: Edward Levert 
Sent: Tuesday, May 28, 2019 6:12:39 PM
To: cnc-list@cnc-list.com
Cc: Neil Andersen
Subject: Re: Stus-List USCG documentation renewal scam - again

In a bit of protest, I marked the notice of the Maritime Documentation Center 
"Return to Sender". Let them throw it away!

Ed Levert
C&C 34 Briar Patch
New Orleans, La

On Tue, May 28, 2019 at 4:28 PM Neil Andersen via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:
For the record, the USCG Documentation Center is in West Virginia.  Go figure...

Neil
1982 C&C 32 FoxFire
Rock Hall, MD

Neil Andersen
20691 Jamieson Rd
Rock Hall, MD 21661


From: CnC-List 
mailto:cnc-list-boun...@cnc-list.com>> on behalf 
of Dennis C. via CnC-List mailto:cnc-list@cnc-list.com>>
Sent: Tuesday, May 28, 2019 5:11 PM
To: CnClist
Cc: Dennis C.
Subject: Stus-List USCG documentation renewal scam - again

Well, it's that time of year.  I got my annual notice from "Maritime 
Documentation Center", Billings, Montana.

For any owners new to this list, this notice always brings a chuckle to many of 
us.  Maritime Documentation Center is NOT the USCG Vessel Documentation Center 
(VDC).  It is a private third party entity who will file your renewal for you 
for what many of us consider an exorbitant fee.

They are always consistent about sending their notice out quite a bit BEFORE 
the USCG sends you the official renewal notice.  Simply wait until you receive 
the official notice from the USCG VDC and then go online and renew for $26.  
You'll save a few $$$ that you can spend on a new boat toy.

Dennis C.
Touche' 35-1 #83
Mandeville, LA
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Anyone have a prop?

[Chuck Saur via CnC-List]

Thanks for all the responses and generous offers of help!  I had the yard
pull DAYDREAM out this morning, and fixed the issue!  Here are some key
things I learned:
-There is no mention of "numbered parts" in the original manual for the
MaxProp Classic three blade feathering prop.  You need to wipe away grease,
and assure that all the part placements are matched with the numbers
stamped on the blades. (1,2 and 3).  The gears, housing and blades are all
stamped with a 1-3 number and need to align, because, according to PYI,
these props prior to around 2000 builds, were basically hand made, and
tuned.  This means each part has small differences that might not be
noticeable. (to someone like me...)
-When re-assembling the blades, make sure they are exactly in the same
position as when they were disassembled. (unless, as in my experience they
may have been reassembled wrong in the past...)

So...thanks again, but my prop is back, and running more smoothly than
ever...and I'm safe in our slip in St Ignace, in the Straits of Mackinac.
If you have other questions, I'll try to convey my new knowledge... Whew!!!
 cs


*Chuck Saur*

*Board Chair  *



*Olivia's Gift*517 490-5926 Cell

616 977-5766 Fax
www.oliviasgift.org



[image: OG logo]
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Stus-List Yanmar 2gm starter problem

[tom via CnC-List]

Hello all,
So my aftermarket starter died last season and I recently pulled it out
looking to compare for fit to a replacement. The local marina looking for
$275 prompted more searching and many seem available for @ $100 or less w 1
year warranty. I believe Yanmar replacement is over $400, so there is the
quality/price issue if anyone can chime in.
However, I now see as a bigger problem. The starter shows a large piece of
the shield for the pinion gear and shaft missing. This part of the shield
section supports the shaft end and that is completely missing...so no
support of the pinion gear shaft. Although I hadn't looked closely at it
when I removed it, I would have noticed loose pieces.  So if this has
broken off inside the bell housing, pieces may still be there. I am
thinking that I must remove the trans for access to clear any remnants. Any
other ideas? Also, any thoughts about why this happened?
Thanks much,
Tom Oryniak
Carry On
33-1 Raritan Bay


Virus-free.
www.avast.com

<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray