Stus-List George Harding Cuthbertson's Binder #5 Slides

[JohnKelly Cuthbertson via CnC-List]

  
  
Binder #5 of the GHC Archives.
https://www.sugarsync.com/pf/D023919_94423331_3175593
  
3 and 4 haven't been published yet.
As usual if you would care to support my
efforts towards publishing my Dad’s work, please consider
helping the Marine Museum of the Great Lakes in Kingston
digitize C’s drawings
https://www.canadahelps.org/en/dn/60975

  
JKC
  

  
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Old Harken Roller II

[Dave S via CnC-List]

Yes.  I puzzled over this for 2 seasons, and experimented with ineffective 
solutions until I f inally, seriously, cleaned and lubricated the head swivel 
while catching up on maintenance stuff.   I did not  connect this with the 
wrapping at all as 
It had always seemed to turn very freely however it turns out it was binding 
under heavy load.
 I had checked it but could not replicate without the sail set so I could never 
actually see the cause.  It was Dangerous at times and just a real hassle other 
times. 
After cleaning and lubricating the swivel, it spins even more freely, a 
noticeable difference once you have a comparison.  
Hasn’t jammed or wrapped since.  

Dave 

33-2


Sent from my iPhone

> On Jul 9, 2021, at 8:13 PM, Korbey Hunt via CnC-List  
> wrote:
> 
> 
> I keep having problems with my Harken halyard twisting around the top of the 
> sail.  Anyone else experience this?
> Get Outlook for Android
> From: dukatolla--- via CnC-List 
> Sent: Friday, July 9, 2021 8:51:45 AM
> To: Danny Haughey via CnC-List 
> Cc: dukato...@hotmail.com 
> Subject: Stus-List Re: Old Harken Roller II
>  
> Hi Danny,
>  
> I have a Harken II Unit 1
> 
> Same as Bruno Spare Connectors and a Foil..would be a great thing to 
> have in the parts department.
> 
> Cheers
> 
> Johnny Wright
> 1970 C
> Sault Ste Marie, Ontario, Canada
> 
> 
> On Friday, July 9, 2021, 11:19:32 a.m. EDT, Danny Haughey via CnC-List 
>  wrote:
> 
> 
> HI Guys, I replaced my old harken roller furler with a new Sheafer.
>  
> Before I toss it, I thought I'd see if anyone needed any parts.  Maybe I 
> should send it to one of the used boat parts places.  At least maybe it could 
> go to use rather than being trashed...
>  
> I replaced the old harken traveler too.  So, I still have that laying around.
>  
> Danny
> Thanks to all of the subscribers that contributed to the list to help with 
> the costs involved.  If you want to show your support to the list - use 
> PayPal to send contribution --  https://www.paypal.me/stumurray Thanks - Stu
> Thanks to all of the subscribers that contributed to the list to help with 
> the costs involved.  If you want to show your support to the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Old Harken Roller II

[Korbey Hunt via CnC-List]

I keep having problems with my Harken halyard twisting around the top of the 
sail.  Anyone else experience this?
Get Outlook for Android

From: dukatolla--- via CnC-List 
Sent: Friday, July 9, 2021 8:51:45 AM
To: Danny Haughey via CnC-List 
Cc: dukato...@hotmail.com 
Subject: Stus-List Re: Old Harken Roller II

Hi Danny,

I have a Harken II Unit 1

Same as Bruno Spare Connectors and a Foil..would be a great thing to 
have in the parts department.

Cheers

Johnny Wright
1970 C
Sault Ste Marie, Ontario, Canada


On Friday, July 9, 2021, 11:19:32 a.m. EDT, Danny Haughey via CnC-List 
 wrote:


HI Guys, I replaced my old harken roller furler with a new Sheafer.

Before I toss it, I thought I'd see if anyone needed any parts.  Maybe I should 
send it to one of the used boat parts places.  At least maybe it could go to 
use rather than being trashed...

I replaced the old harken traveler too.  So, I still have that laying around.

Danny
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --  https://www.paypal.me/stumurray 

 Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Old Harken Roller II

[David Risch via CnC-List]

FYI. Shipping has gone up appreciably lately.

Sent from my Android. Please forgive typos. Thank you.


From: Hoyt, Mike via CnC-List 
Sent: Friday, July 9, 2021 3:19:12 PM
To: 'Stus-List' 
Cc: Hoyt, Mike 
Subject: Stus-List Re: Old Harken Roller II


Hi Danny



I once sold a complete roller furling assembly off a previous boat.  The one 
thing I learned the hard way is that Loc Tite is used when the foils are 
assembled.  Don’t forget to apply heat to the set screws before removal or it 
may not be so pretty.



I used UPS for the shipping.  Sent along with a RF headsail so shipping was 
something like $150 at the time.



Regards



Mike Hoyt

Persistence

Halifax, NS



From: Danny Haughey via CnC-List 
Sent: July 9, 2021 4:09 PM
To: cnc-list@cnc-list.com
Cc: Danny Haughey 
Subject: Stus-List Re: Old Harken Roller II



OK so, Steve Mallet  was the first to respond and he's looking for the lower 
stuff.



I'm in Rehoboth Massachusetts.



I'm sure the foils can be shipped.  Just need a longer box and its all about 
cost from there.



The thing is still completely assembled at the boatyard, in a rack, currently 
in Barrington RI.  I'll have to try and get over there and start pulling it 
apart.



Although, time is always the issue, My boat is now in Mattapoisett Ma in the 
completely opposite direction.



I'll see what I can do about getting it apart.  No one seems to be in a big 
hurry, would these just be spares to have on hand?



I think the first thing to do is get the thing broken down and out of the 
boatyard.  I'll keep you all posted on how that goes.



Danny

-- Original Message --
From: dukatolla--- via CnC-List 
mailto:cnc-list@cnc-list.com>>
To: Danny Haughey via CnC-List 
mailto:cnc-list@cnc-list.com>>
Cc: "dukato...@hotmail.com" 
mailto:dukato...@hotmail.com>>
Subject: Stus-List Re: Old Harken Roller II
Date: Fri, 9 Jul 2021 16:51:45 + (UTC)



Hi Danny,



I have a Harken II Unit 1



Same as Bruno Spare Connectors and a Foil..would be a great thing to 
have in the parts department.



Cheers



Johnny Wright

1970 C

Sault Ste Marie, Ontario, Canada



On Friday, July 9, 2021, 11:19:32 a.m. EDT, Danny Haughey via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:





HI Guys, I replaced my old harken roller furler with a new Sheafer.



Before I toss it, I thought I'd see if anyone needed any parts.  Maybe I should 
send it to one of the used boat parts places.  At least maybe it could go to 
use rather than being trashed...



I replaced the old harken traveler too.  So, I still have that laying around.



Danny

Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --  https://www.paypal.me/stumurray 

 Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Old Harken Roller II

[Hoyt, Mike via CnC-List]

Hi Danny

I once sold a complete roller furling assembly off a previous boat.  The one 
thing I learned the hard way is that Loc Tite is used when the foils are 
assembled.  Don't forget to apply heat to the set screws before removal or it 
may not be so pretty.

I used UPS for the shipping.  Sent along with a RF headsail so shipping was 
something like $150 at the time.

Regards

Mike Hoyt
Persistence
Halifax, NS

From: Danny Haughey via CnC-List 
Sent: July 9, 2021 4:09 PM
To: cnc-list@cnc-list.com
Cc: Danny Haughey 
Subject: Stus-List Re: Old Harken Roller II

OK so, Steve Mallet  was the first to respond and he's looking for the lower 
stuff.

I'm in Rehoboth Massachusetts.

I'm sure the foils can be shipped.  Just need a longer box and its all about 
cost from there.

The thing is still completely assembled at the boatyard, in a rack, currently 
in Barrington RI.  I'll have to try and get over there and start pulling it 
apart.

Although, time is always the issue, My boat is now in Mattapoisett Ma in the 
completely opposite direction.

I'll see what I can do about getting it apart.  No one seems to be in a big 
hurry, would these just be spares to have on hand?

I think the first thing to do is get the thing broken down and out of the 
boatyard.  I'll keep you all posted on how that goes.

Danny

-- Original Message --
From: dukatolla--- via CnC-List 
mailto:cnc-list@cnc-list.com>>
To: Danny Haughey via CnC-List 
mailto:cnc-list@cnc-list.com>>
Cc: "dukato...@hotmail.com" 
mailto:dukato...@hotmail.com>>
Subject: Stus-List Re: Old Harken Roller II
Date: Fri, 9 Jul 2021 16:51:45 + (UTC)

Hi Danny,

I have a Harken II Unit 1

Same as Bruno Spare Connectors and a Foil..would be a great thing to 
have in the parts department.

Cheers

Johnny Wright
1970 C
Sault Ste Marie, Ontario, Canada

On Friday, July 9, 2021, 11:19:32 a.m. EDT, Danny Haughey via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:


HI Guys, I replaced my old harken roller furler with a new Sheafer.

Before I toss it, I thought I'd see if anyone needed any parts.  Maybe I should 
send it to one of the used boat parts places.  At least maybe it could go to 
use rather than being trashed...

I replaced the old harken traveler too.  So, I still have that laying around.

Danny
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --  https://www.paypal.me/stumurray Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Old Harken Roller II

[Danny Haughey via CnC-List]

OK so, Steve Mallet  was the first to respond and he's looking for the lower 
stuff. I'm in Rehoboth Massachusetts. I'm sure the foils can be shipped.  Just 
need a longer box and its all about cost from there. The thing is still 
completely assembled at the boatyard, in a rack, currently in Barrington RI.  
I'll have to try and get over there and start pulling it apart. Although, time 
is always the issue, My boat is now in Mattapoisett Ma in the completely 
opposite direction. I'll see what I can do about getting it apart.  No one 
seems to be in a big hurry, would these just be spares to have on hand? I think 
the first thing to do is get the thing broken down and out of the boatyard.  
I'll keep you all posted on how that goes. Danny
-- Original Message --
From: dukatolla--- via CnC-List 
To: Danny Haughey via CnC-List 
Cc: "dukato...@hotmail.com" 
Subject: Stus-List Re: Old Harken Roller II
Date: Fri, 9 Jul 2021 16:51:45 + (UTC)


 Hi Danny, I have a Harken II Unit 1 Same as Bruno Spare Connectors and a 
Foil..would be a great thing to have in the parts department. Cheers Johnny 
Wright1970 C Ste Marie, Ontario, Canada On Friday, July 9, 2021, 
11:19:32 a.m. EDT, Danny Haughey via CnC-List  wrote:  
HI Guys, I replaced my old harken roller furler with a new Sheafer. Before I 
toss it, I thought I'd see if anyone needed any parts.  Maybe I should send it 
to one of the used boat parts places.  At least maybe it could go to use rather 
than being trashed... I replaced the old harken traveler too.  So, I still have 
that laying around. DannyThanks to all of the subscribers that contributed to 
the list to help with the costs involved.  If you want to show your support to 
the list - use PayPal to send contribution --  https://www.paypal.me/stumurray  
Thanks - StuThanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Old Harken Roller II

[dukatolla--- via CnC-List]

 Hi Danny,
 I have a Harken II Unit 1
Same as Bruno Spare Connectors and a Foil..would be a great thing to 
have in the parts department.
Cheers

Johnny Wright1970 C Ste Marie, Ontario, Canada

On Friday, July 9, 2021, 11:19:32 a.m. EDT, Danny Haughey via CnC-List 
 wrote:  
 
  HI Guys, I replaced my old harken roller furler with a new Sheafer. Before I 
toss it, I thought I'd see if anyone needed any parts.  Maybe I should send it 
to one of the used boat parts places.  At least maybe it could go to use rather 
than being trashed... I replaced the old harken traveler too.  So, I still have 
that laying around. DannyThanks to all of the subscribers that contributed to 
the list to help with the costs involved.  If you want to show your support to 
the list - use PayPal to send contribution --  https://www.paypal.me/stumurray  
Thanks - Stu  Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Old Harken Roller II

[Dave S via CnC-List]

Hi Danny I could use an extrusion and connector myself.  Mine is also missing 
the top bearing.  Thanks for putting this out there.

Dave 33-2 - Toronto area 

Sent from my iPhone

> On Jul 9, 2021, at 11:19 AM, Danny Haughey via CnC-List 
>  wrote:
> 
> 
> HI Guys, I replaced my old harken roller furler with a new Sheafer.
>  
> Before I toss it, I thought I'd see if anyone needed any parts.  Maybe I 
> should send it to one of the used boat parts places.  At least maybe it could 
> go to use rather than being trashed...
>  
> I replaced the old harken traveler too.  So, I still have that laying around.
>  
> Danny
> Thanks to all of the subscribers that contributed to the list to help with 
> the costs involved.  If you want to show your support to the list - use 
> PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Old Harken Roller II

[Bruno Lachance via CnC-List]

Hi Danny,

I have a 1987 unit 1

I dont' know where you are located, but i would be interested to have one or 
two spares foils connectors. Foil section would be nice too but i guess the 
shipping would be challenging.

Thanks

Bruno Lachance
33-2
New-Richmond, Qc


De : Hoyt, Mike via CnC-List 
Envoyé : 9 juillet 2021 11:38
À : 'Stus-List' 
Cc : Hoyt, Mike 
Objet : Stus-List Re: Old Harken Roller II


Hi Danny



What model furler and do you have pictures?  Some of those parts are no loger 
made and very difficult to get.



Mike Hoyt

Persistence

Halifax, NS




From: Danny Haughey via CnC-List 
Sent: July 9, 2021 12:18 PM
To: cnc-list@cnc-list.com
Cc: Danny Haughey 
Subject: Stus-List Old Harken Roller II



HI Guys, I replaced my old harken roller furler with a new Sheafer.



Before I toss it, I thought I'd see if anyone needed any parts.  Maybe I should 
send it to one of the used boat parts places.  At least maybe it could go to 
use rather than being trashed...



I replaced the old harken traveler too.  So, I still have that laying around.



Danny
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: Old Harken Roller II

[Hoyt, Mike via CnC-List]

Hi Danny

What model furler and do you have pictures?  Some of those parts are no loger 
made and very difficult to get.

Mike Hoyt
Persistence
Halifax, NS


From: Danny Haughey via CnC-List 
Sent: July 9, 2021 12:18 PM
To: cnc-list@cnc-list.com
Cc: Danny Haughey 
Subject: Stus-List Old Harken Roller II

HI Guys, I replaced my old harken roller furler with a new Sheafer.

Before I toss it, I thought I'd see if anyone needed any parts.  Maybe I should 
send it to one of the used boat parts places.  At least maybe it could go to 
use rather than being trashed...

I replaced the old harken traveler too.  So, I still have that laying around.

Danny
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Old Harken Roller II

[Danny Haughey via CnC-List]

HI Guys, I replaced my old harken roller furler with a new Sheafer. Before I 
toss it, I thought I'd see if anyone needed any parts.  Maybe I should send it 
to one of the used boat parts places.  At least maybe it could go to use rather 
than being trashed... I replaced the old harken traveler too.  So, I still have 
that laying around. DannyThanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support to the list - use PayPal to 
send contribution --   https://www.paypal.me/stumurray  Thanks - Stu

Stus-List Re: C 37r coming to market soon

[DJ via CnC-List]

No, she's not even listed yet. On Jul 8, 2021 9:36 PM, Joel Delamirande via CnC-List  wrote:Is the 37r sold already On Thu, Jul 8, 2021 at 9:33 PM David Risch via CnC-List  wrote:





You da man. Thank you but  keeping my Corsair for continued NE explorations. Was just offered more than market.  Nope.  My escape valve.   She is so damned pretty.  






Sent from my Android. Please forgive typos. Thank you. 



From: DJ via CnC-List 
Sent: Thursday, July 8, 2021 4:00:19 PM
To: Stus-List 
Cc: DJ 
Subject: Stus-List Re: C 37r coming to market soon
 


You can always come sailing with me! 

On Jul 8, 2021 12:17 PM, David Risch via CnC-List  wrote:



Waiting for the damned boat yard!
 

From: DJ via CnC-List  
Sent: Thursday, July 8, 2021 11:28 AM
To: Stus-List 
Cc: DJ 
Subject: Stus-List Re: C 37r coming to market soon

 

The boat is in Mattapoisett, MA

 


I'm about to have lunch with the owner if there are any questions.   I'll get the usual info


 


David?  Where are you these days?  I want to see your new "stink pot!"  LOL


 


Danny



 

On Jul 8, 2021 11:19 AM, WILLIAM WALKER via CnC-List  wrote:




Where is 37R located?


 




On Thursday, July 8, 2021, 08:04:26 AM EDT, Joel Delamirande via CnC-List  wrote:



 


 





Me too I would like to revive the brand 


I curious to see the boat



 


On Thu, Jul 8, 2021 at 6:22 AM Bob Tallman  wrote:



Good morning,


 


37R is for the racing model of that line.


You had:


37+


37 XL


37 R


Note that they are all 40 foot boats, the fun part of a decision to stretch out the hull and add more stuff but keep the name.  And most marinas know the model is a 40 so not
 much savings per foot there.


 


I owned a 37+ center board, she was fast as well, pointing was not so bad since the CB was actually a large stainless disk that dropped down, not a traditional dagger board.


There were shoal keels and deep fin versions as well.


 


The R is the race circuit model and yes it is a fast boat.  Nice interior but no aft berth, it was a racing setup.  Mid ship berths etc?..


 


The XL was the blended version.  Had all the creature comforts, taller rig, similar to the R, but setup was more cruiser vs. racer.  


Great line, just the dang  C window problem but all fixable?.


 


I moved on to a 121, love C, wish they would magically make one more new run of the lines??..  


 


On Thu, Jul 8, 2021 at 5:45 AM Joel Delamirande via CnC-List  wrote:



That would be great


What does the R stand for?


 




On Wed, Jul 7, 2021 at 9:18 PM Danny via CnC-List  wrote:



Hello all, 

 


A friend of mine, who is not on the list,  is about to list his beautiful C 37r for sale. 


 


I don't know all the details yet but, i do know it's been very well cared for, is in great condition, and is really fast! 


 


I've been on this boat a number of times.  It's in really great shape! 


 


Let me know if there are any questions I can get answers to. 


 


I'll get year and price and such soon.  I just thought i would throw this out there in case anyone was looking or knew someone that might be interested. 


 


Thanks, 


Danny


Thanks to all of the subscribers that contributed to the list to help with the costs involved.  If you want to show your support to the list - use PayPal to send contribution
 --   https://www.paypal.me/stumurray 
 Thanks - Stu



--





Joel Delamirande





www.jdroofing.ca


 




Thanks to all of the subscribers that contributed to the list to help with the costs involved. If you want to show your support to the list - use PayPal to send contribution
 -- 
https://www.paypal.me/stumurray Thanks - Stu



--


Regards,

Bob Tallman
631.387.6748





--





Joel Delamirande





www.jdroofing.ca


 







Thanks to all of the subscribers that contributed to the list to help with the costs involved.  If you want to show your support to the list - use PayPal to send contribution
 --  
https://www.paypal.me/stumurray Thanks - Stu








 










Thanks to all of the subscribers that contributed to the list to help with the costs involved.  If you want to show your support to the list - use PayPal to send contribution --   https://www.paypal.me/stumurray  Thanks - Stu-- Joel Delamirande
www.jdroofing.ca
Thanks to all of the subscribers that contributed to the list to help with the 
costs involved.  If you want to show your support