Re: Stus-List Flooring
There are significant differences even between different varnish finishes. They are not all the same when wet! Bill Bina On 2/22/2016 7:22 PM, schiller via CnC-List wrote: I wouldn't think it would be any worse than a varnished wood floor. Neil Schiller 1970 Redwing 35, Hull #7 (C 35, Mark I) "Corsair" On 2/22/2016 5:29 PM, BillBinaList via CnC-List wrote: My biggest concern would be whether it is slippery when wet. Bill Bina On 2/22/2016 4:44 PM, schiller via CnC-List wrote: We are having new cushions made for Corsair by Canvas Innovations in Holland, Michigan. While we were up finalizing the plan and selecting fabric, we saw a woven vinyl flooring made by Infinity Vinyl that look pretty interesting. It is used in Tiara Yachts and he was doing a Ski boat in his shop. Corsair was built with a fiberglass pan floor. This flooring is interesting because it is laid down like a rug (with snaps on the corners, if needed). It is about 1/4" thick and cushioned. The Admiral was really impressed and is thinking hard about doing a floor set. It runs $9.58/sq ft, so it's not cheap. I liked the Teak and Holly pattern. We have always just done throw rugs. This would be a little step up. ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Flooring
I wouldn't think it would be any worse than a varnished wood floor. Neil Schiller 1970 Redwing 35, Hull #7 (C 35, Mark I) "Corsair" On 2/22/2016 5:29 PM, BillBinaList via CnC-List wrote: My biggest concern would be whether it is slippery when wet. Bill Bina On 2/22/2016 4:44 PM, schiller via CnC-List wrote: We are having new cushions made for Corsair by Canvas Innovations in Holland, Michigan. While we were up finalizing the plan and selecting fabric, we saw a woven vinyl flooring made by Infinity Vinyl that look pretty interesting. It is used in Tiara Yachts and he was doing a Ski boat in his shop. Corsair was built with a fiberglass pan floor. This flooring is interesting because it is laid down like a rug (with snaps on the corners, if needed). It is about 1/4" thick and cushioned. The Admiral was really impressed and is thinking hard about doing a floor set. It runs $9.58/sq ft, so it's not cheap. I liked the Teak and Holly pattern. We have always just done throw rugs. This would be a little step up. The new cushions (with new backs that are attached directly to the walls) with all new foam, using Sunbrella material will be around $3,500 complete. Neil Schiller 1970 Redwing 35, Hull #7 (C 35, Mark I) "Corsair" Soon to be moved to Whitehall, Michigan ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Re: Stus-List Flooring
My biggest concern would be whether it is slippery when wet. Bill Bina On 2/22/2016 4:44 PM, schiller via CnC-List wrote: We are having new cushions made for Corsair by Canvas Innovations in Holland, Michigan. While we were up finalizing the plan and selecting fabric, we saw a woven vinyl flooring made by Infinity Vinyl that look pretty interesting. It is used in Tiara Yachts and he was doing a Ski boat in his shop. Corsair was built with a fiberglass pan floor. This flooring is interesting because it is laid down like a rug (with snaps on the corners, if needed). It is about 1/4" thick and cushioned. The Admiral was really impressed and is thinking hard about doing a floor set. It runs $9.58/sq ft, so it's not cheap. I liked the Teak and Holly pattern. We have always just done throw rugs. This would be a little step up. The new cushions (with new backs that are attached directly to the walls) with all new foam, using Sunbrella material will be around $3,500 complete. Neil Schiller 1970 Redwing 35, Hull #7 (C 35, Mark I) "Corsair" Soon to be moved to Whitehall, Michigan ___ Email address: CnC-List@cnc-list.com To change your list preferences, including unsubscribing -- go to the bottom of page at: http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
