Re: Stus-List New Stripin g...

2017-10-18 Thread Bill Bina - gmail via CnC-List 
Sometimes new car buyers do not like some of the decals or stripes on 
the car they are buying. Car dealer body shops and detailers all use the 
3M stripe remover on brand new cars. It is relatively fast and doesn't 
damage the finish.


Bill Bina


On 10/18/2017 9:41 AM, Hoyt, Mike via CnC-List wrote:


A word of caution …

On painted hulls the green scratchy pad removes gunk when washing with 
soapy water but also leaves permanent scratches.  (Guess how I know).


OTOH the 3m stripe removal wheel takes off lettering without an 
issue.  Great product!


Mike

Persistence

Still Sailing

Halifax

*From:*CnC-List [mailto:cnc-list-boun...@cnc-list.com] *On Behalf Of 
*svpegasus38 via CnC-List

*Sent:* Tuesday, October 17, 2017 12:41 PM
*To:* cnc-list@cnc-list.com
*Cc:* svpegasus38
*Subject:* Re: Stus-List New Stripin g...

I used a heat gun, and plastic scraper to remove my old graphics, to 
remove the old glue I used Ez-off oven cleaner (the lemon stuff) and a 
green scratchy pad. Worked great.


Sent from my T-Mobile 4G LTE Device

Doug Mountjoy

POYC

Pegasus (for sale)

Lf38

Rebecca Leah LF39

 Original message 

From: "Matthew L. Wolford via CnC-List" <mailto:cnc-list@cnc-list.com>>


Date: 10/17/17 08:14 (GMT-08:00)

To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>

Cc: "Matthew L. Wolford" mailto:wolf...@erie.net>>

Subject: Re: Stus-List New Stripin g...

Somebody makes a spray-on graphics remover that I used a few years 
ago.  It worked well as I recall, although multiple applications were 
required for some of the more tenacious areas.  Unfortunately, I can’t 
remember the name of the stuff.  Someone on the list may know.


*From:*David via CnC-List <mailto:cnc-list@cnc-list.com>

*Sent:*Tuesday, October 17, 2017 10:52 AM

*To:*cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>

*Cc:*David <mailto:davidrisc...@msn.com>

*Subject:*Re: Stus-List New Stripin g...

Andy,

Thanks but I speak of overlaying the stripes/stars and not the name 
and hailing port.  It seems that getting the striping out of the 
recesses will be much harder than the flush surface name/hailing.


Did you remove the striping with scraper and heat gun/hair dryer as well?

David F. Risch

(401) 419-4650 (cell)



*From:*CnC-List <mailto:cnc-list-boun...@cnc-list.com>> on behalf of Andrew Burton via 
CnC-List mailto:cnc-list@cnc-list.com>>

*Sent:* Tuesday, October 17, 2017 10:41 AM
*To:* cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>
*Cc:* Andrew Burton
*Subject:* Re: Stus-List New Stripin g...

No, you'll get an uneven finish on the new graphics. You'll also be 
sticking the nice new stuff to lettering stuck on with  old glue. here 
are some tips from one of Sail Magazine's "experts." :)


https://www.sailmagazine.com/diy/removing-and-applying-vinyl-lettering 
<https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.sailmagazine.com%2Fdiy%2Fremoving-and-applying-vinyl-lettering&data=02%7C01%7Cdavidrisch75%40msn.com%7Ccd44c9ed61ae48314a4608d5156d4b7b%7C84df9e7fe9f640afb435%7C1%7C0%7C636438481523576688&sdata=lzA%2FmvzKy05tI5eeaez7c1lOPDwyN4gcTeHNHGlkAu0%3D&reserved=0>


Andy

C&C 40

Peregrine

On Tue, Oct 17, 2017 at 10:33 AM, David via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:


So I am putting on new name graphics and hull striping.   Assuming a 
good clean of the old striping, could I not lay the new over the old 
and eliminate the seemingly arduous (it being in a recess) step of 
removing it all?


Thanks in advance


___

The bills have started coming in for the year 2018 and have gone up 
again.  October will be our fund raising month.  Please consider 
sending a small contribution to help keep this list running.  Use 
PayPal to send contribution -- https://www.paypal.me/stumurray 
<https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurray&data=02%7C01%7Cdavidrisch75%40msn.com%7Ccd44c9ed61ae48314a4608d5156d4b7b%7C84df9e7fe9f640afb435%7C1%7C0%7C636438481523576688&sdata=lN%2F21LdaIETPwvYAMbuQk7mvsRF6KDsgmV3RGV4F5%2BU%3D&reserved=0>


All contributions are greatly appreciated!




--

Andrew Burton
61 W Narragansett Ave
Newport, RI
USA 02840
http://sites.google.com/site/andrewburtonyachtservices/ 
<https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fsites.google.com%2Fsite%2Fandrewburtonyachtservices%2F&data=02%7C01%7Cdavidrisch75%40msn.com%7Ccd44c9ed61ae48314a4608d5156d4b7b%7C84df9e7fe9f640afb435%7C1%7C0%7C636438481523576688&sdata=89zkPVi7DGhRMBBz546w9CBRhQY%2FI8%2Bw85iTv1RefVY%3D&reserved=0>

phone  +401 965 5260



___

Re: Stus-List New Stripin g...

2017-10-18 Thread Hoyt, Mike via CnC-List 
A word of caution …

On painted hulls the green scratchy pad removes gunk when washing with soapy 
water but also leaves permanent scratches.  (Guess how I know).

OTOH the 3m stripe removal wheel takes off lettering without an issue.  Great 
product!

Mike
Persistence
Still Sailing
Halifax

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of svpegasus38 
via CnC-List
Sent: Tuesday, October 17, 2017 12:41 PM
To: cnc-list@cnc-list.com
Cc: svpegasus38
Subject: Re: Stus-List New Stripin g...

I used a heat gun, and plastic scraper to remove my old graphics, to remove the 
old glue I used Ez-off oven cleaner (the lemon stuff) and a green scratchy pad. 
Worked great.



Sent from my T-Mobile 4G LTE Device
Doug Mountjoy
POYC
Pegasus (for sale)
Lf38
Rebecca Leah LF39

 Original message 
From: "Matthew L. Wolford via CnC-List" 
mailto:cnc-list@cnc-list.com>>
Date: 10/17/17 08:14 (GMT-08:00)
To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>
Cc: "Matthew L. Wolford" mailto:wolf...@erie.net>>
Subject: Re: Stus-List New Stripin g...

Somebody makes a spray-on graphics remover that I used a few years ago.  It 
worked well as I recall, although multiple applications were required for some 
of the more tenacious areas.  Unfortunately, I can’t remember the name of the 
stuff.  Someone on the list may know.

From: David via CnC-List<mailto:cnc-list@cnc-list.com>
Sent: Tuesday, October 17, 2017 10:52 AM
To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>
Cc: David<mailto:davidrisc...@msn.com>
Subject: Re: Stus-List New Stripin g...


Andy,



Thanks but I speak of overlaying the stripes/stars and not the name and hailing 
port.  It seems that getting the striping out of the recesses will be much 
harder than the flush surface name/hailing.



Did you remove the striping with scraper and heat gun/hair dryer as well?







David F. Risch

(401) 419-4650 (cell)


From: CnC-List 
mailto:cnc-list-boun...@cnc-list.com>> on behalf 
of Andrew Burton via CnC-List 
mailto:cnc-list@cnc-list.com>>
Sent: Tuesday, October 17, 2017 10:41 AM
To: cnc-list@cnc-list.com<mailto:cnc-list@cnc-list.com>
Cc: Andrew Burton
Subject: Re: Stus-List New Stripin g...

No, you'll get an uneven finish on the new graphics. You'll also be sticking 
the nice new stuff to lettering stuck on with  old glue. here are some tips 
from one of Sail Magazine's "experts." :)
https://www.sailmagazine.com/diy/removing-and-applying-vinyl-lettering<https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.sailmagazine.com%2Fdiy%2Fremoving-and-applying-vinyl-lettering&data=02%7C01%7Cdavidrisch75%40msn.com%7Ccd44c9ed61ae48314a4608d5156d4b7b%7C84df9e7fe9f640afb435%7C1%7C0%7C636438481523576688&sdata=lzA%2FmvzKy05tI5eeaez7c1lOPDwyN4gcTeHNHGlkAu0%3D&reserved=0>

Andy
C&C 40
Peregrine

On Tue, Oct 17, 2017 at 10:33 AM, David via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:

So I am putting on new name graphics and hull striping.   Assuming a good clean 
of the old striping, could I not lay the new over the old and eliminate the 
seemingly arduous (it being in a recess) step of removing it all?



Thanks in advance



___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   
https://www.paypal.me/stumurray<https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurray&data=02%7C01%7Cdavidrisch75%40msn.com%7Ccd44c9ed61ae48314a4608d5156d4b7b%7C84df9e7fe9f640afb435%7C1%7C0%7C636438481523576688&sdata=lN%2F21LdaIETPwvYAMbuQk7mvsRF6KDsgmV3RGV4F5%2BU%3D&reserved=0>

All contributions are greatly appreciated!



--
Andrew Burton
61 W Narragansett Ave
Newport, RI
USA 02840
http://sites.google.com/site/andrewburtonyachtservices/<https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fsites.google.com%2Fsite%2Fandrewburtonyachtservices%2F&data=02%7C01%7Cdavidrisch75%40msn.com%7Ccd44c9ed61ae48314a4608d5156d4b7b%7C84df9e7fe9f640afb435%7C1%7C0%7C636438481523576688&sdata=89zkPVi7DGhRMBBz546w9CBRhQY%2FI8%2Bw85iTv1RefVY%3D&reserved=0>
phone  +401 965 5260

___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!
___

The bills have started coming in for the year 2018 a

Re: Stus-List New Stripin g...

2017-10-17 Thread Neil Andersen via CnC-List 
Do you use it parallel or perpendicular to the strip?

Neil
C&C32, Rock Hall, MD

Neil Andersen
20691 Jamieson Rd
Rock Hall, MD 21661

From: CnC-List  on behalf of Dennis C. via 
CnC-List 
Sent: Tuesday, October 17, 2017 6:31:47 PM
To: CnClist
Cc: Dennis C.
Subject: Re: Stus-List New Stripin g...

Like Gary said, use a 3M Stripe Off wheel and a drill.  It was recommended by 
the guy that painted my boat and it really works.  Took my cove stripe off 
quickly and completely with no damage to underlying paint.  It's just a big 
round gum eraser.

Dennis C.
Touche' 35-1 #83
Mandeville, LA

On Tue, Oct 17, 2017 at 9:33 AM, David via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:

So I am putting on new name graphics and hull striping.   Assuming a good clean 
of the old striping, could I not lay the new over the old and eliminate the 
seemingly arduous (it being in a recess) step of removing it all?


Thanks in advance


___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!


___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List New Stripin g...

2017-10-17 Thread Dennis C. via CnC-List 
Like Gary said, use a 3M Stripe Off wheel and a drill.  It was recommended
by the guy that painted my boat and it really works.  Took my cove stripe
off quickly and completely with no damage to underlying paint.  It's just a
big round gum eraser.

Dennis C.
Touche' 35-1 #83
Mandeville, LA

On Tue, Oct 17, 2017 at 9:33 AM, David via CnC-List 
wrote:

> So I am putting on new name graphics and hull striping.   Assuming a good
> clean of the old striping, could I not lay the new over the old and
> eliminate the seemingly arduous (it being in a recess) step of removing it
> all?
>
>
> Thanks in advance
>
>
>
> ___
>
> The bills have started coming in for the year 2018 and have gone up
> again.  October will be our fund raising month.  Please consider sending a
> small contribution to help keep this list running.  Use PayPal to send
> contribution --   https://www.paypal.me/stumurray
>
> All contributions are greatly appreciated!
>
>
___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List New Stripin g...

2017-10-17 Thread Chuck Gilchrest via CnC-List 
I’ve used something called elbow grease.  My father recommended it to me years 
ago, but I’ve yet to find it in our local stores.

Chuck Gilchrest

S/V Half Magic (Formerly Brain Wave, Formerly Orion)

1983 Landfall 35

Padanaram, MA

 

From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Matthew L. 
Wolford via CnC-List
Sent: Tuesday, October 17, 2017 11:15 AM
To: cnc-list@cnc-list.com
Cc: Matthew L. Wolford 
Subject: Re: Stus-List New Stripin g...

 

Somebody makes a spray-on graphics remover that I used a few years ago.  It 
worked well as I recall, although multiple applications were required for some 
of the more tenacious areas.  Unfortunately, I can’t remember the name of the 
stuff.  Someone on the list may know.

 

From: David via CnC-List <mailto:cnc-list@cnc-list.com>  

Sent: Tuesday, October 17, 2017 10:52 AM

To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com>  

Cc: David <mailto:davidrisc...@msn.com>  

Subject: Re: Stus-List New Stripin g...

 

Andy,

 

Thanks but I speak of overlaying the stripes/stars and not the name and hailing 
port.  It seems that getting the striping out of the recesses will be much 
harder than the flush surface name/hailing. 

 

Did you remove the striping with scraper and heat gun/hair dryer as well?

 

 

 

David F. Risch

(401) 419-4650 (cell)

 

  _  

From: CnC-List mailto:cnc-list-boun...@cnc-list.com> > on behalf of Andrew Burton via 
CnC-List mailto:cnc-list@cnc-list.com> >
Sent: Tuesday, October 17, 2017 10:41 AM
To: cnc-list@cnc-list.com <mailto:cnc-list@cnc-list.com> 
Cc: Andrew Burton
Subject: Re: Stus-List New Stripin g... 

 

No, you'll get an uneven finish on the new graphics. You'll also be sticking 
the nice new stuff to lettering stuck on with  old glue. here are some tips 
from one of Sail Magazine's "experts." :)

https://www.sailmagazine.com/diy/removing-and-applying-vinyl-lettering 
<https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.sailmagazine.com%2Fdiy%2Fremoving-and-applying-vinyl-lettering&data=02%7C01%7Cdavidrisch75%40msn.com%7Ccd44c9ed61ae48314a4608d5156d4b7b%7C84df9e7fe9f640afb435%7C1%7C0%7C636438481523576688&sdata=lzA%2FmvzKy05tI5eeaez7c1lOPDwyN4gcTeHNHGlkAu0%3D&reserved=0>
 

 

Andy

C&C 40

Peregrine

 

On Tue, Oct 17, 2017 at 10:33 AM, David via CnC-List mailto:cnc-list@cnc-list.com> > wrote:

So I am putting on new name graphics and hull striping.   Assuming a good clean 
of the old striping, could I not lay the new over the old and eliminate the 
seemingly arduous (it being in a recess) step of removing it all?

 

Thanks in advance

 


___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray 
<https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurray&data=02%7C01%7Cdavidrisch75%40msn.com%7Ccd44c9ed61ae48314a4608d5156d4b7b%7C84df9e7fe9f640afb435%7C1%7C0%7C636438481523576688&sdata=lN%2F21LdaIETPwvYAMbuQk7mvsRF6KDsgmV3RGV4F5%2BU%3D&reserved=0>
 

All contributions are greatly appreciated!




-- 

Andrew Burton
61 W Narragansett Ave
Newport, RI
USA 02840
http://sites.google.com/site/andrewburtonyachtservices/ 
<https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fsites.google.com%2Fsite%2Fandrewburtonyachtservices%2F&data=02%7C01%7Cdavidrisch75%40msn.com%7Ccd44c9ed61ae48314a4608d5156d4b7b%7C84df9e7fe9f640afb435%7C1%7C0%7C636438481523576688&sdata=89zkPVi7DGhRMBBz546w9CBRhQY%2FI8%2Bw85iTv1RefVY%3D&reserved=0>
 
phone  +401 965 5260

  _  

___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List New Stripin g...

2017-10-17 Thread Gary Russell via CnC-List 
Use a 3M Stripe off wheel.  See here
.
It is safe for Awlgrip and gelcoat.  It sounds scary, but it is much easier
and safer than a heat gun.  Final result here

.

Gary
S/V Kaylarah
'90 C&C 37+
East Greenwich, RI, USA

~~~_/)~~


On Tue, Oct 17, 2017 at 10:33 AM, David via CnC-List 
wrote:

> So I am putting on new name graphics and hull striping.   Assuming a good
> clean of the old striping, could I not lay the new over the old and
> eliminate the seemingly arduous (it being in a recess) step of removing it
> all?
>
>
> Thanks in advance
>
>
>
> ___
>
> The bills have started coming in for the year 2018 and have gone up
> again.  October will be our fund raising month.  Please consider sending a
> small contribution to help keep this list running.  Use PayPal to send
> contribution --   https://www.paypal.me/stumurray
>
> All contributions are greatly appreciated!
>
>
___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List New Stripin g...

2017-10-17 Thread svpegasus38 via CnC-List 
I used a heat gun, and plastic scraper to remove my old graphics, to remove the 
old glue I used Ez-off oven cleaner (the lemon stuff) and a green scratchy pad. 
Worked great. 


Sent from my T-Mobile 4G LTE DeviceDoug Mountjoy POYC Pegasus (for sale) Lf38 
Rebecca Leah LF39 
 Original message From: "Matthew L. Wolford via CnC-List" 
 Date: 10/17/17  08:14  (GMT-08:00) To: 
cnc-list@cnc-list.com Cc: "Matthew L. Wolford"  Subject: Re: 
Stus-List New Stripin g... 



Somebody makes a spray-on graphics remover that I used a few years 
ago.  It worked well as I recall, although multiple applications were 
required for some of the more tenacious areas.  Unfortunately, I can’t 
remember the name of the stuff.  Someone on the list may know.


 

From: David via CnC-List 
Sent: Tuesday, October 17, 2017 10:52 AM
To: cnc-list@cnc-list.com 
Cc: David 
Subject: Re: Stus-List New Stripin g...
 


Andy,
 
Thanks but I speak of overlaying the stripes/stars and not the name and 
hailing port.  It seems that getting the striping out of the recesses will 
be much harder than the flush surface name/hailing. 
 
Did you remove the striping with scraper and heat gun/hair dryer as 
well?

 
 
 


David F. Risch

(401) 419-4650 (cell)






From: CnC-List 
 on behalf of Andrew Burton via CnC-List 

Sent: Tuesday, October 17, 2017 10:41 
AM
To: cnc-list@cnc-list.com
Cc: Andrew 
Burton
Subject: Re: Stus-List New Stripin g... 
 


No, you'll get an uneven finish on the new graphics. You'll also be 
sticking the nice new stuff to lettering stuck on with  old glue. here are 
some tips from one of Sail Magazine's "experts." :)
https://www.sailmagazine.com/diy/removing-and-applying-vinyl-lettering
 
Andy
C&C 40
Peregrine

 
On Tue, Oct 17, 2017 at 10:33 AM, David via CnC-List 
 wrote:


  
  
  So I am putting on new name graphics and hull striping.   
  Assuming a good clean of the old striping, could I not lay the new over the 
  old and eliminate the seemingly arduous (it being in a recess) step of 
  removing it all?
   
  Thanks in advance

   
___

The 
  bills have started coming in for the year 2018 and have gone up again.  
  October will be our fund raising month.  Please consider sending a small 
  contribution to help keep this list running.  Use PayPal to send 
  contribution --   https://www.paypal.me/stumurray

All 
  contributions are greatly appreciated!




-- 

Andrew Burton
61 W Narragansett Ave
Newport, 
RI
USA 02840
http://sites.google.com/site/andrewburtonyachtservices/
phone  
+401 965 5260


___

The bills have started 
coming in for the year 2018 and have gone up again.  October will be our 
fund raising month.  Please consider sending a small contribution to help 
keep this list running.  Use PayPal to send contribution --   
https://www.paypal.me/stumurray

All contributions are greatly 
appreciated!
___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List New Stripin g...

2017-10-17 Thread Matthew L. Wolford via CnC-List 
Somebody makes a spray-on graphics remover that I used a few years ago.  It 
worked well as I recall, although multiple applications were required for some 
of the more tenacious areas.  Unfortunately, I can’t remember the name of the 
stuff.  Someone on the list may know.

From: David via CnC-List 
Sent: Tuesday, October 17, 2017 10:52 AM
To: cnc-list@cnc-list.com 
Cc: David 
Subject: Re: Stus-List New Stripin g...

Andy,



Thanks but I speak of overlaying the stripes/stars and not the name and hailing 
port.  It seems that getting the striping out of the recesses will be much 
harder than the flush surface name/hailing. 



Did you remove the striping with scraper and heat gun/hair dryer as well?








David F. Risch


(401) 419-4650 (cell)








From: CnC-List  on behalf of Andrew Burton via 
CnC-List 
Sent: Tuesday, October 17, 2017 10:41 AM
To: cnc-list@cnc-list.com
Cc: Andrew Burton
Subject: Re: Stus-List New Stripin g... 

No, you'll get an uneven finish on the new graphics. You'll also be sticking 
the nice new stuff to lettering stuck on with  old glue. here are some tips 
from one of Sail Magazine's "experts." :)
https://www.sailmagazine.com/diy/removing-and-applying-vinyl-lettering

Andy
C&C 40
Peregrine

On Tue, Oct 17, 2017 at 10:33 AM, David via CnC-List  
wrote:

  So I am putting on new name graphics and hull striping.   Assuming a good 
clean of the old striping, could I not lay the new over the old and eliminate 
the seemingly arduous (it being in a recess) step of removing it all?



  Thanks in advance





  ___

  The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

  All contributions are greatly appreciated!





-- 

Andrew Burton
61 W Narragansett Ave
Newport, RI
USA 02840
http://sites.google.com/site/andrewburtonyachtservices/
phone  +401 965 5260



___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!
___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List New Stripin g...

2017-10-17 Thread Andrew Burton via CnC-List 
That's why I used quotation marks. Obviously just another hack!

Andy
C&C 40
Peregrine

On Tue, Oct 17, 2017 at 10:45 AM, Joel Aronson via CnC-List <
cnc-list@cnc-list.com> wrote:

> What does THAT guy know?  :)
>
> Joel
>
>
> 
>  Virus-free.
> www.avg.com
> 
> <#m_6234565777941267872_DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
>
> On Tue, Oct 17, 2017 at 10:41 AM, Andrew Burton via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> No, you'll get an uneven finish on the new graphics. You'll also be
>> sticking the nice new stuff to lettering stuck on with  old glue. here are
>> some tips from one of Sail Magazine's "experts." :)
>> https://www.sailmagazine.com/diy/removing-and-applying-vinyl-lettering
>>
>> Andy
>> C&C 40
>> Peregrine
>>
>> On Tue, Oct 17, 2017 at 10:33 AM, David via CnC-List <
>> cnc-list@cnc-list.com> wrote:
>>
>>> So I am putting on new name graphics and hull striping.   Assuming a
>>> good clean of the old striping, could I not lay the new over the old and
>>> eliminate the seemingly arduous (it being in a recess) step of removing it
>>> all?
>>>
>>>
>>> Thanks in advance
>>>
>>>
>>>
>>> ___
>>>
>>> The bills have started coming in for the year 2018 and have gone up
>>> again.  October will be our fund raising month.  Please consider sending a
>>> small contribution to help keep this list running.  Use PayPal to send
>>> contribution --   https://www.paypal.me/stumurray
>>>
>>> All contributions are greatly appreciated!
>>>
>>>
>>
>>
>> --
>> Andrew Burton
>> 61 W Narragansett Ave
>> Newport, RI
>> USA 02840
>> http://sites.google.com/site/andrewburtonyachtservices/
>> phone  +401 965 5260
>>
>> ___
>>
>> The bills have started coming in for the year 2018 and have gone up
>> again.  October will be our fund raising month.  Please consider sending a
>> small contribution to help keep this list running.  Use PayPal to send
>> contribution --   https://www.paypal.me/stumurray
>>
>> All contributions are greatly appreciated!
>>
>>
>
>
> --
> Joel
> 301 541 8551 <(301)%20541-8551>
>
> ___
>
> The bills have started coming in for the year 2018 and have gone up
> again.  October will be our fund raising month.  Please consider sending a
> small contribution to help keep this list running.  Use PayPal to send
> contribution --   https://www.paypal.me/stumurray
>
> All contributions are greatly appreciated!
>
>


-- 
Andrew Burton
61 W Narragansett Ave
Newport, RI
USA 02840
http://sites.google.com/site/andrewburtonyachtservices/
phone  +401 965 5260
___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List New Stripin g...

2017-10-17 Thread David via CnC-List 
Andy,


Thanks but I speak of overlaying the stripes/stars and not the name and hailing 
port.  It seems that getting the striping out of the recesses will be much 
harder than the flush surface name/hailing.


Did you remove the striping with scraper and heat gun/hair dryer as well?




David F. Risch

(401) 419-4650 (cell)



From: CnC-List  on behalf of Andrew Burton via 
CnC-List 
Sent: Tuesday, October 17, 2017 10:41 AM
To: cnc-list@cnc-list.com
Cc: Andrew Burton
Subject: Re: Stus-List New Stripin g...

No, you'll get an uneven finish on the new graphics. You'll also be sticking 
the nice new stuff to lettering stuck on with  old glue. here are some tips 
from one of Sail Magazine's "experts." :)
https://www.sailmagazine.com/diy/removing-and-applying-vinyl-lettering<https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.sailmagazine.com%2Fdiy%2Fremoving-and-applying-vinyl-lettering&data=02%7C01%7Cdavidrisch75%40msn.com%7Ccd44c9ed61ae48314a4608d5156d4b7b%7C84df9e7fe9f640afb435%7C1%7C0%7C636438481523576688&sdata=lzA%2FmvzKy05tI5eeaez7c1lOPDwyN4gcTeHNHGlkAu0%3D&reserved=0>

Andy
C&C 40
Peregrine

On Tue, Oct 17, 2017 at 10:33 AM, David via CnC-List 
mailto:cnc-list@cnc-list.com>> wrote:

So I am putting on new name graphics and hull striping.   Assuming a good clean 
of the old striping, could I not lay the new over the old and eliminate the 
seemingly arduous (it being in a recess) step of removing it all?


Thanks in advance


___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   
https://www.paypal.me/stumurray<https://nam04.safelinks.protection.outlook.com/?url=https%3A%2F%2Fwww.paypal.me%2Fstumurray&data=02%7C01%7Cdavidrisch75%40msn.com%7Ccd44c9ed61ae48314a4608d5156d4b7b%7C84df9e7fe9f640afb435%7C1%7C0%7C636438481523576688&sdata=lN%2F21LdaIETPwvYAMbuQk7mvsRF6KDsgmV3RGV4F5%2BU%3D&reserved=0>

All contributions are greatly appreciated!




--
Andrew Burton
61 W Narragansett Ave
Newport, RI
USA 02840
http://sites.google.com/site/andrewburtonyachtservices/<https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fsites.google.com%2Fsite%2Fandrewburtonyachtservices%2F&data=02%7C01%7Cdavidrisch75%40msn.com%7Ccd44c9ed61ae48314a4608d5156d4b7b%7C84df9e7fe9f640afb435%7C1%7C0%7C636438481523576688&sdata=89zkPVi7DGhRMBBz546w9CBRhQY%2FI8%2Bw85iTv1RefVY%3D&reserved=0>
phone  +401 965 5260
___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List New Stripin g...

2017-10-17 Thread Joel Aronson via CnC-List 
What does THAT guy know?  :)

Joel


Virus-free.
www.avg.com

<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

On Tue, Oct 17, 2017 at 10:41 AM, Andrew Burton via CnC-List <
cnc-list@cnc-list.com> wrote:

> No, you'll get an uneven finish on the new graphics. You'll also be
> sticking the nice new stuff to lettering stuck on with  old glue. here are
> some tips from one of Sail Magazine's "experts." :)
> https://www.sailmagazine.com/diy/removing-and-applying-vinyl-lettering
>
> Andy
> C&C 40
> Peregrine
>
> On Tue, Oct 17, 2017 at 10:33 AM, David via CnC-List <
> cnc-list@cnc-list.com> wrote:
>
>> So I am putting on new name graphics and hull striping.   Assuming a good
>> clean of the old striping, could I not lay the new over the old and
>> eliminate the seemingly arduous (it being in a recess) step of removing it
>> all?
>>
>>
>> Thanks in advance
>>
>>
>>
>> ___
>>
>> The bills have started coming in for the year 2018 and have gone up
>> again.  October will be our fund raising month.  Please consider sending a
>> small contribution to help keep this list running.  Use PayPal to send
>> contribution --   https://www.paypal.me/stumurray
>>
>> All contributions are greatly appreciated!
>>
>>
>
>
> --
> Andrew Burton
> 61 W Narragansett Ave
> Newport, RI
> USA 02840
> http://sites.google.com/site/andrewburtonyachtservices/
> phone  +401 965 5260
>
> ___
>
> The bills have started coming in for the year 2018 and have gone up
> again.  October will be our fund raising month.  Please consider sending a
> small contribution to help keep this list running.  Use PayPal to send
> contribution --   https://www.paypal.me/stumurray
>
> All contributions are greatly appreciated!
>
>


-- 
Joel
301 541 8551
___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!

Re: Stus-List New Stripin g...

2017-10-17 Thread Andrew Burton via CnC-List 
No, you'll get an uneven finish on the new graphics. You'll also be
sticking the nice new stuff to lettering stuck on with  old glue. here are
some tips from one of Sail Magazine's "experts." :)
https://www.sailmagazine.com/diy/removing-and-applying-vinyl-lettering

Andy
C&C 40
Peregrine

On Tue, Oct 17, 2017 at 10:33 AM, David via CnC-List 
wrote:

> So I am putting on new name graphics and hull striping.   Assuming a good
> clean of the old striping, could I not lay the new over the old and
> eliminate the seemingly arduous (it being in a recess) step of removing it
> all?
>
>
> Thanks in advance
>
>
>
> ___
>
> The bills have started coming in for the year 2018 and have gone up
> again.  October will be our fund raising month.  Please consider sending a
> small contribution to help keep this list running.  Use PayPal to send
> contribution --   https://www.paypal.me/stumurray
>
> All contributions are greatly appreciated!
>
>


-- 
Andrew Burton
61 W Narragansett Ave
Newport, RI
USA 02840
http://sites.google.com/site/andrewburtonyachtservices/
phone  +401 965 5260
___

The bills have started coming in for the year 2018 and have gone up again.  
October will be our fund raising month.  Please consider sending a small 
contribution to help keep this list running.  Use PayPal to send contribution 
--   https://www.paypal.me/stumurray

All contributions are greatly appreciated!