Re: Stus-List Wood Bulkheads...

2018-05-30 Thread Danny Haughey via CnC-List

David,

you can use some bleach to try and lighten them. if its spots, you just 
kind of wet it on the spot let it sit and then rinse thoroughly with a 
spray bottle and rags.



I used watco danish finish on my boat down below.  I used a palm sander, 
went over it once with 320 grit then again with 420 grit immediately 
following, the wood came back brighter, smooth and with a nice luster.  
You let that sit for about a week and then just add the watco wax as a 
protectant.  The idea with the watco is to get it to develop a slurry 
with the sanding dust, this penetrates down into the grains and then 
hardens to seal and protect the wood and give it a harder finish.  It 
will also bead water, (don't ask how I know that...) even before you add 
the wax.


Danny


On 5/30/2018 2:33 PM, David via CnC-List wrote:


So my forward cabin bulkheads are not looking great.   Used vinegar 
and water to clean and tried a recommended restorative product and it 
turned the worst part black.  WTF.



I assume I can sand it but I also think it is a thin veneer.   Any 
experience?



Thanks in advance.


*David F. Risch, J. D.*

*1981 40-2
*

*/GulfStreamAssociates,LLC/**
*

**

*(401) 419-4650 *


 
	Virus-free. www.avast.com 
 





___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray



Stus-List Wood Bulkheads...

2018-05-30 Thread David via CnC-List
So my forward cabin bulkheads are not looking great.   Used vinegar and water 
to clean and tried a recommended restorative product and it turned the worst 
part black.  WTF.


I assume I can sand it but I also think it is a thin veneer.   Any experience?


Thanks in advance.


David F. Risch, J. D.

1981 40-2

Gulf Stream Associates, LLC

(401) 419-4650

[https://ipmcdn.avast.com/images/icons/icon-envelope-tick-round-orange-animated-no-repeat-v1.gif]
Virus-free. 
www.avast.com
___

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray