[GitHub] [mynewt-mcumgr-cli] rlevano77 opened a new issue, #29: Image upload does not work over UDP - Zephyr smp_svr sample

[GitBox]

rlevano77 opened a new issue, #29:
URL: https://github.com/apache/mynewt-mcumgr-cli/issues/29

   I am trying to setup the zephyr  samples/subsys/mgmt/mcumgr/smp_svr using UDP
   I am using Windows 11 and Golang v1.18.4
   After I added mcuboot to my atsame54_xpro board.
   I built the smp_svr with UDP support using :
   `west build -p auto -b myboard -d build-signed -- 
-DCONFIG_MCUBOOT_SIGNATURE_KEY_FILE=\"bootloader/mcuboot/root-rsa-2048.pem\" 
-DOVERLAY_CONFIG=overlay-udp.conf`
   
   mcuboot reconigze the image :
Booting Zephyr OS build zephyr-v3.1.0-812-g88ca3aca98c0  
   I: Starting bootloader
   I: Primary image: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
   I: Scratch: magic=unset, swap_type=0x1, copy_done=0x3, image_ok=0x3
   I: Boot source: primary slot
   I: Swap type: none
   I: Bootloader chainload address offset: 0x1
   I: Jumping to the first image slot
   [00:00:00.255,000]  mdio_sam: transfer timedout MDIO
   [00:00:00.510,000]  mdio_sam: transfer timedout MDIO
   [00:00:00.765,000]  mdio_sam: transfer timedout MDIO
Booting Zephyr OS build zephyr-v3.1.0-812-g88ca3aca98c0  
   [00:00:01.020,000]  mdio_sam: transfer timedout MDIO
   [00:00:01.020,000]  eth_sam: MAC: 02:04:25:4b:d0:b9
   [00:00:01.020,000]  eth_sam: Queue 0 activated
   [00:00:06.069,000]  phy_mii: PHY (0) Link speed 100 Mb, full duplex
   [00:00:06.069,000]  eth_sam: Link up
   [00:00:06.070,000]  smp_udp_sample: Network connected
   [00:00:06.070,000]  smp_sample: build time: Jul 20 2022 06:19:25
   [00:00:06.070,000]  smp_udp: Started (IPv4)
   
   I tested the udp connection  and works ok :
   `$ mcumgr --conntype udp --connstring=[192.168.1.71]:1337 echo hello
   hello
   
   $ mcumgr --conntype udp --connstring=[192.168.1.71]:1337 image list
   Images:
image=0 slot=0
   version: 0.0.0
   bootable: true
   flags: active confirmed
   hash: 5fbc81f7d0f5e5de22f254746bc977ce8836bf364e576f4f03c418bd1451679c
   Split status: N/A (0)`
   
   But when I try to upload an image I only see
   $ mcumgr --conntype udp --connstring=[192.168.1.71]:1337 image upload 
build-signed/zephyr/zephyr.signed.bin
0 B / 71.88 KiB 
[]
   0.00%
   and nothing uploads.
   
   


-- 
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.

To unsubscribe, e-mail: commits-unsubscr...@mynewt.apache.org.apache.org

For queries about this service, please contact Infrastructure at:
us...@infra.apache.org

[GitHub] [mynewt-core] kasjer commented on pull request #2858: hw/drivers/flash/spiflash: Add option to ignore JEDEC ID

[GitBox]

kasjer commented on PR #2858:
URL: https://github.com/apache/mynewt-core/pull/2858#issuecomment-1191269201

   Hi, I am out of office, idea is good so definitely I will support it, I
   have not seen the code, I will take a look next week.
   
   Thanks for your submittion.
   Jerzy
   
   czw., 21 lip 2022, 10:17 użytkownik Christoph Honal <
   ***@***.***> napisał:
   
   > @kasjer  Is this something you would consider
   > merging? The feature would be opt-in.
   >
   > —
   > Reply to this email directly, view it on GitHub
   > ,
   > or unsubscribe
   > 

   > .
   > You are receiving this because you were mentioned.Message ID:
   > ***@***.***>
   >
   


-- 
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.

To unsubscribe, e-mail: commits-unsubscr...@mynewt.apache.org

For queries about this service, please contact Infrastructure at:
us...@infra.apache.org

[GitHub] [mynewt-core] StarGate01 commented on pull request #2858: hw/drivers/flash/spiflash: Add option to ignore JEDEC ID

[GitBox]

StarGate01 commented on PR #2858:
URL: https://github.com/apache/mynewt-core/pull/2858#issuecomment-1191185810

   @kasjer Is this something you would consider merging? The feature would be 
opt-in.


-- 
This is an automated message from the Apache Git Service.
To respond to the message, please log on to GitHub and use the
URL above to go to the specific comment.

To unsubscribe, e-mail: commits-unsubscr...@mynewt.apache.org

For queries about this service, please contact Infrastructure at:
us...@infra.apache.org