Re: which file system for sd card?
I found vfat clearly better (less susceptible to corruption) than ext2, however ext3 is better than vfat, but will still play up at times. Using it for OSM maps BillK On Sat, 2009-01-24 at 19:41 +0100, Fernando Martins wrote: > I bought a 2GB sd card which came formatted with FAT. Is this a good > option for the sd card or is it advisable to use another fs? I'm using > it for osm maps. > > Regards, > Fernando > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community -- William Kenworthy Home in Perth! ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [2008.12] Pause mplayer on call ?
On 2009.01.21.14.50, Michal Brzozowski wrote: | 2009/1/20 Dylan Reilly | | > Pausing mplayer is probably going to be problematic without re-writing | > it. Firstly, you would have to run it in slave mode so that you could | > write to the process using a pipe. | | | How about pausing and starting on a signal? No need to read from a pipe. | Probably a simple hack would do it. How about 'killall -STOP mplayer' (equivalent of '^z') and then 'killall -CONT mplayer' (equivalent of 'fg' after the '^z') Toss those into the rules.yaml, eh? --Brock ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: which file system for sd card?
Sean McNeil пишет: > thewire wrote: >> The Digital Pioneer пишет: >> >>> The only reason they come with FAT is so windoze can use it. That said, >>> I don't know much about filesystems, but I would generally go with >>> EXT2/3 over FAT. >>> >> I'm no fs expert either, but i would generally advise to use jffs2 or >> ubifs, as they are specially designed for use in flash memory devices. >> Note that ubifs requires kernel >= 2.6.27. > > Neither of those filesystems are appropriate for sd cards. They have > wear leveling logic that is not necessary or a good thing as it is > already done in firmware for sd. Oh, i see. I was wrong then. Thank you for pointing that. > An efficient journaled filesystem not > designed for memory devices (like ext3) would be best. If SD firmware is "not clever enough" to expect anything that is not FAT — I remember hearing about devices, that corrupt headers of other filesystems because they excepted nothing but FAT. It is also recommended to switch journaling off, because it would cause additional writes. And this would not only wear the device, but also likely not be of any help in event of sudden power loss because of some internal details of SD firmware. Now I again expect experts to fix my opinion ;D. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: which file system for sd card?
thewire wrote: > The Digital Pioneer пишет: > >> The only reason they come with FAT is so windoze can use it. That said, >> I don't know much about filesystems, but I would generally go with >> EXT2/3 over FAT. >> > > I'm no fs expert either, but i would generally advise to use jffs2 or > ubifs, as they are specially designed for use in flash memory devices. > Note that ubifs requires kernel >= 2.6.27. Neither of those filesystems are appropriate for sd cards. They have wear leveling logic that is not necessary or a good thing as it is already done in firmware for sd. An efficient journaled filesystem not designed for memory devices (like ext3) would be best. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: which file system for sd card?
The Digital Pioneer пишет: > The only reason they come with FAT is so windoze can use it. That said, > I don't know much about filesystems, but I would generally go with > EXT2/3 over FAT. I'm no fs expert either, but i would generally advise to use jffs2 or ubifs, as they are specially designed for use in flash memory devices. Note that ubifs requires kernel >= 2.6.27. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: which file system for sd card?
FAT is used for general purpose. It can be recognized on many different systems. So if you what to share files between your Windows or Mac desktop with your Neo using SD card. Then FAT is perfect. If the SD card is only prepared for your Neo, EXT2/3 is preferred. On Sun, Jan 25, 2009 at 2:49 AM, The Digital Pioneer < digitalpion...@gmail.com> wrote: > The only reason they come with FAT is so windoze can use it. That said, I > don't know much about filesystems, but I would generally go with EXT2/3 over > FAT. > > -- > Thanks, > > The Digital Pioneer > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > > -- Best Regards HouYu Li, Karajan karajan_ii (at) hotmail.com karadog (at) gmail.com lihouyu (at) phpex.net PHP Programmer Red Hat Certified Engineer 15th Feb, 2008 Shanghai, China ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Spam
Jim Ancona wrote: > No, looking at the headers, almost certainly not. Someone simply > forged Mickey's address using their email client. I receive spam > "From" my address all the time. The only difference is that they sent > it through the mailing list. Indeed. Readers should exercise common sense when seeing mail from people, especially relatively well-known people in the community, which seems out of character or nonsensical before jumping to conclusions about that person becoming a spammer, going over to the Dark Side, and so on. > A better rule (which I have just violated) is not to reply at all, > since it just clutters the list. To avoid some problems with forged mail, I recommend setting up an SPF policy record: http://www.openspf.org/ See the "Deploying SPF" part of that page and the associated setup wizard. When I looked at openmoko.org's DNS records, I couldn't find any evidence of SPF policies, so perhaps someone should look into it. And everyone else who isn't publishing SPF policies for their domain should consider doing so, too - it's a pain to get a deluge of spam backscatter in one's inbox, but you can prevent it from happening. Paul ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: tangoGPS 0.9.5 is out
>> ps: please cut the mail to the necessary minimum when replying. >> >> > Sure, didn't realise it was an issue. Is it for bandwith/storage, > readibility or something else? well, it is a tad annoying -- to have mail that stretches over several pages with basically nothing but a single line appended. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: tangoGPS 0.9.5 is out
arne anka wrote: >> Also my thanks to the author for such a nice app! GPS was my third >> reason to buy OM. Now it's only missing a navigation guide with voice. >> > > navit. > Thanks, > ps: please cut the mail to the necessary minimum when replying. > > Sure, didn't realise it was an issue. Is it for bandwith/storage, readibility or something else? Fernando ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [debian] zhone not working
On Sat, Jan 24, 2009 at 12:55:47PM -0800, vale wrote: > > Zhone does not longer work after upgrading debian, [snip] > ImportError: libevas.so.0: cannot open shared object file: No such file or > directory $ apt-file find libevas.so.0 libevas-dbg: /usr/lib/debug/usr/lib/libevas.so.0.9.9 libevas0: /usr/lib/libevas.so.0 libevas0: /usr/lib/libevas.so.0.9.9 So try to install the libevas0 package. It should have been installed automatically, though, through a dependency from zhone. What does $ dpkg --status zhone give? Anyway, last thing I heard was that the libevas0 package in Debian doesn't work. Someone was kind enough to provide a fixed one, but I have forgotten the URL. -- Rask Ingemann Lambertsen Danish law requires addresses in e-mail to be logged and stored for a year ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: tangoGPS 0.9.5 is out
> Also my thanks to the author for such a nice app! GPS was my third > reason to buy OM. Now it's only missing a navigation guide with voice. navit. ps: please cut the mail to the necessary minimum when replying. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: tangoGPS 0.9.5 is out
Great, thanks! I didn't realise the file had been replaced and I just assumed it was correct. BTW, I haven't seen it mentioned but I had a problem with disappearing tiles, specifically at zoom level 14 and in my position, and now it is working well. Also my thanks to the author for such a nice app! GPS was my third reason to buy OM. Now it's only missing a navigation guide with voice. Cheers, Fernando Michael Sheldon wrote: > Fernando Martins wrote: > >> Michael Sheldon wrote: >> >>> Fernando Martins wrote: >>> >>> Michael Sheldon wrote: > Fernando Martins wrote: > > > >> I'm using shr unstable (yesterday's) and I got >> >> * ERROR: Cannot satisfy the following dependencies for tangogps: >> * gtk+-fastscaling (>= 2.10.14) * >> >> I tried: >> >> opkg install gtk+-fastscaling >> >> and I got: >> >> An error ocurred, return value: -50512. >> >> I'm not really familiar with opkg, but I think the packages are supposed >> to come from shr/unstable/ipk, but the package is not there... >> >> >> > Just use --force-depends, in most recent builds the gtk+ package is > simply "gtk+" rather than gtk+-fastscaling. So you'll have all the > necessary files anyway. > > > Thanks, I used: opkg -force-depends install http://www.tangogps.org/downloads /tangogps_0.9.5-r0_armv4t.opk but I still get the same error. (I also tried --force-depends, it seems both syntaxes are accepted). >>> Are you sure it was an error? You'll still see the same message with >>> --force-depends but it will be downgraded to a warning instead of an >>> error and the package will be installed despite it. >>> >>> >>> >> Sorry, you are right; as I said, not really familiar with it, and a too >> quick reading of the message. >> >> Something else, the tangoGPS desktop icon stop being displayed during >> install. The tangogps.desktop file is under /usr/share/applications (I >> believe this is the right one) but it's not displayed anymore. I haven't >> rebooted yet to see if it comes back, but anyway I guess this should not >> be happening. >> > > Yes, it looks like there's a mistake in the tangogps.desktop file, > instead of having the category "Applications" it has the category > "Application". You can fix this in one of two ways, either edit the > tangogps.desktop file in /usr/share/applications or edit > /etc/xdg/menus/applications.menu, scroll down to the bottom and add > "Application" to the section of the > "Accessories" . > > Cheers, >Mike. > > >> Marcus Bauer wrote: >> >> >> >>> Hello, >>> >>> a new release of tangoGPS is out. Improvements are: >>> >>> - better handling of broken NMEA (some people experienced crashers) >>> - fix for correct lat/lon display for eastern longitudes and southern >>> latitudes >>> - Google has changed their URI scheme thus satellite imagery works now >>> too - anyway, there is copyright on them, just use free alternatives >>> - a cool new default repository is opencycle map >>> - the whole repository dialog is now overhauled >>> >>> ...and a couple more things. >>> >>> As usual you can get it at http://www.tangogps.org/ >>> >>> By the way, I will be at FOSDEM and spend some time at the GNOME stand. >>> Just drop by and say hello. >>> >>> Have fun >>> Marcus >>> >>> >>> ___ >>> Openmoko community mailing list >>> community@lists.openmoko.org >>> http://lists.openmoko.org/mailman/listinfo/community >>> >>> >>> >>> >>> >> ___ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community >> >> >> >> > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > > > > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community >>> ___ >>> Openmoko community mailing list >>> community@lists.openmoko.org >>> http://lists.openmoko.org/mailman/listinfo/community >>> >>> >>> >> ___ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.or
Re: tangoGPS 0.9.5 is out
Fernando Martins wrote: > Michael Sheldon wrote: >> Fernando Martins wrote: >> >>> Michael Sheldon wrote: >>> Fernando Martins wrote: > I'm using shr unstable (yesterday's) and I got > > * ERROR: Cannot satisfy the following dependencies for tangogps: > * gtk+-fastscaling (>= 2.10.14) * > > I tried: > > opkg install gtk+-fastscaling > > and I got: > > An error ocurred, return value: -50512. > > I'm not really familiar with opkg, but I think the packages are supposed > to come from shr/unstable/ipk, but the package is not there... > > Just use --force-depends, in most recent builds the gtk+ package is simply "gtk+" rather than gtk+-fastscaling. So you'll have all the necessary files anyway. >>> Thanks, I used: >>> >>> opkg -force-depends install http://www.tangogps.org/downloads >>> /tangogps_0.9.5-r0_armv4t.opk >>> >>> but I still get the same error. (I also tried --force-depends, it seems >>> both syntaxes are accepted). >>> >> Are you sure it was an error? You'll still see the same message with >> --force-depends but it will be downgraded to a warning instead of an >> error and the package will be installed despite it. >> >> > Sorry, you are right; as I said, not really familiar with it, and a too > quick reading of the message. > > Something else, the tangoGPS desktop icon stop being displayed during > install. The tangogps.desktop file is under /usr/share/applications (I > believe this is the right one) but it's not displayed anymore. I haven't > rebooted yet to see if it comes back, but anyway I guess this should not > be happening. Yes, it looks like there's a mistake in the tangogps.desktop file, instead of having the category "Applications" it has the category "Application". You can fix this in one of two ways, either edit the tangogps.desktop file in /usr/share/applications or edit /etc/xdg/menus/applications.menu, scroll down to the bottom and add "Application" to the section of the "Accessories" . Cheers, Mike. > Marcus Bauer wrote: > > >> Hello, >> >> a new release of tangoGPS is out. Improvements are: >> >> - better handling of broken NMEA (some people experienced crashers) >> - fix for correct lat/lon display for eastern longitudes and southern >> latitudes >> - Google has changed their URI scheme thus satellite imagery works now >> too - anyway, there is copyright on them, just use free alternatives >> - a cool new default repository is opencycle map >> - the whole repository dialog is now overhauled >> >> ...and a couple more things. >> >> As usual you can get it at http://www.tangogps.org/ >> >> By the way, I will be at FOSDEM and spend some time at the GNOME stand. >> Just drop by and say hello. >> >> Have fun >> Marcus >> >> >> ___ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community >> >> >> >> > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > > > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community >>> ___ >>> Openmoko community mailing list >>> community@lists.openmoko.org >>> http://lists.openmoko.org/mailman/listinfo/community >>> >>> >> >> ___ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community >> >> > > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: tangoGPS 0.9.5 is out
Michael Sheldon wrote: > Fernando Martins wrote: > >> Michael Sheldon wrote: >> >>> Fernando Martins wrote: >>> >>> I'm using shr unstable (yesterday's) and I got * ERROR: Cannot satisfy the following dependencies for tangogps: * gtk+-fastscaling (>= 2.10.14) * I tried: opkg install gtk+-fastscaling and I got: An error ocurred, return value: -50512. I'm not really familiar with opkg, but I think the packages are supposed to come from shr/unstable/ipk, but the package is not there... >>> Just use --force-depends, in most recent builds the gtk+ package is >>> simply "gtk+" rather than gtk+-fastscaling. So you'll have all the >>> necessary files anyway. >>> >>> >> Thanks, I used: >> >> opkg -force-depends install http://www.tangogps.org/downloads >> /tangogps_0.9.5-r0_armv4t.opk >> >> but I still get the same error. (I also tried --force-depends, it seems >> both syntaxes are accepted). >> > > Are you sure it was an error? You'll still see the same message with > --force-depends but it will be downgraded to a warning instead of an > error and the package will be installed despite it. > > Sorry, you are right; as I said, not really familiar with it, and a too quick reading of the message. Something else, the tangoGPS desktop icon stop being displayed during install. The tangogps.desktop file is under /usr/share/applications (I believe this is the right one) but it's not displayed anymore. I haven't rebooted yet to see if it comes back, but anyway I guess this should not be happening. Cheers, Fernando > Cheers, > Mike. > > Marcus Bauer wrote: > Hello, > > a new release of tangoGPS is out. Improvements are: > > - better handling of broken NMEA (some people experienced crashers) > - fix for correct lat/lon display for eastern longitudes and southern > latitudes > - Google has changed their URI scheme thus satellite imagery works now > too - anyway, there is copyright on them, just use free alternatives > - a cool new default repository is opencycle map > - the whole repository dialog is now overhauled > > ...and a couple more things. > > As usual you can get it at http://www.tangogps.org/ > > By the way, I will be at FOSDEM and spend some time at the GNOME stand. > Just drop by and say hello. > > Have fun > Marcus > > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > > > > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community >>> ___ >>> Openmoko community mailing list >>> community@lists.openmoko.org >>> http://lists.openmoko.org/mailman/listinfo/community >>> >>> >>> >> ___ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community >> >> > > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Is there an echo-free distro?
2009/1/23 ezuall : > > Thanks for that, I will give that new SHR distro a try this weekend. I am trying SHR-unstable now. I called my wife today, and she said something like "ah, at last, a normal sound". She confirmed that the echo was much reduced; there was still something there, but very quiet and not significantly distracting. Neil ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: SHR Unstable
Same here! On Sat, Jan 24, 2009 at 23:08, Neil Jerram wrote: > 2009/1/24 Petr Vanek : You can speed up scrolling by switching to the Software_16 engine (Spanner -> Advanced -> Engine) and reducing the framerate to around 15 >>> >>>I'm probably being stupid, but I don't see any "Advanced" option in >>>the dialog that comes up after touching the spanner... >> >> the icon bar (Display|Look|Screen...) can slide to the left (has more >> items on the right) > > Thanks, I see that, but mine (shr unstable) still only has Display, > Look, Screen and Input. > > Neil > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: SHR Unstable
2009/1/24 Petr Vanek : >>> You can speed up scrolling by switching to the Software_16 engine >>> (Spanner -> Advanced -> Engine) and reducing the framerate to around >>> 15 >> >>I'm probably being stupid, but I don't see any "Advanced" option in >>the dialog that comes up after touching the spanner... > > the icon bar (Display|Look|Screen...) can slide to the left (has more > items on the right) Thanks, I see that, but mine (shr unstable) still only has Display, Look, Screen and Input. Neil ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: SHR Unstable
>> You can speed up scrolling by switching to the Software_16 engine >> (Spanner -> Advanced -> Engine) and reducing the framerate to around >> 15 > >I'm probably being stupid, but I don't see any "Advanced" option in >the dialog that comes up after touching the spanner... the icon bar (Display|Look|Screen...) can slide to the left (has more items on the right) petr ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: tangoGPS 0.9.5 is out
>> but I still get the same error. (I also tried --force-depends, it >> seems both syntaxes are accepted). > > Are you sure it was an error? You'll still see the same message with >--force-depends but it will be downgraded to a warning instead of an >error and the package will be installed despite it. i just tried it and it installs ok on shr unstable: r...@om-gta02 ~ $ opkg -force-depends install http://www.tangogps.org/downloads/tangogps_0.9.5-r0_armv4t.opk Downloading http://www.tangogps.org/downloads/tangogps_0.9.5-r0_armv4t.opk Multiple packages (tangogps and tangogps) providing same name marked HOLD or PREFER. Using latest. Multiple packages (tangogps and tangogps) providing same name marked HOLD or PREFER. Using latest. Multiple packages (tangogps and tangogps) providing same name marked HOLD or PREFER. Using latest. Installing tangogps (0.9.5-r0) to root... Multiple replacers for gpsd, using first one (fso-gpsd) Configuring tangogps Collected errors: * Warning: Cannot satisfy the following dependencies for tangogps: * gtk+-fastscaling (>= 2.10.14) * r...@om-gta02 ~ $ r...@om-gta02 ~ $ opkg list_installed | grep tango tangogps - 0.9.5-r0 - petr ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: SHR Unstable
2009/1/24 Michael Sheldon : > > You can speed up scrolling by switching to the Software_16 engine > (Spanner -> Advanced -> Engine) and reducing the framerate to around 15 I'm probably being stupid, but I don't see any "Advanced" option in the dialog that comes up after touching the spanner... Neil ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: tangoGPS 0.9.5 is out
Fernando Martins wrote: > Michael Sheldon wrote: >> Fernando Martins wrote: >> >>> I'm using shr unstable (yesterday's) and I got >>> >>> * ERROR: Cannot satisfy the following dependencies for tangogps: >>> * gtk+-fastscaling (>= 2.10.14) * >>> >>> I tried: >>> >>> opkg install gtk+-fastscaling >>> >>> and I got: >>> >>> An error ocurred, return value: -50512. >>> >>> I'm not really familiar with opkg, but I think the packages are supposed >>> to come from shr/unstable/ipk, but the package is not there... >>> >> Just use --force-depends, in most recent builds the gtk+ package is >> simply "gtk+" rather than gtk+-fastscaling. So you'll have all the >> necessary files anyway. >> > Thanks, I used: > > opkg -force-depends install http://www.tangogps.org/downloads > /tangogps_0.9.5-r0_armv4t.opk > > but I still get the same error. (I also tried --force-depends, it seems > both syntaxes are accepted). Are you sure it was an error? You'll still see the same message with --force-depends but it will be downgraded to a warning instead of an error and the package will be installed despite it. Cheers, Mike. >>> Marcus Bauer wrote: >>> Hello, a new release of tangoGPS is out. Improvements are: - better handling of broken NMEA (some people experienced crashers) - fix for correct lat/lon display for eastern longitudes and southern latitudes - Google has changed their URI scheme thus satellite imagery works now too - anyway, there is copyright on them, just use free alternatives - a cool new default repository is opencycle map - the whole repository dialog is now overhauled ...and a couple more things. As usual you can get it at http://www.tangogps.org/ By the way, I will be at FOSDEM and spend some time at the GNOME stand. Just drop by and say hello. Have fun Marcus ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community >>> ___ >>> Openmoko community mailing list >>> community@lists.openmoko.org >>> http://lists.openmoko.org/mailman/listinfo/community >>> >>> >> >> ___ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community >> >> > > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: tangoGPS 0.9.5 is out
Michael Sheldon wrote: > Fernando Martins wrote: > >> I'm using shr unstable (yesterday's) and I got >> >> * ERROR: Cannot satisfy the following dependencies for tangogps: >> * gtk+-fastscaling (>= 2.10.14) * >> >> I tried: >> >> opkg install gtk+-fastscaling >> >> and I got: >> >> An error ocurred, return value: -50512. >> >> I'm not really familiar with opkg, but I think the packages are supposed >> to come from shr/unstable/ipk, but the package is not there... >> > > Just use --force-depends, in most recent builds the gtk+ package is > simply "gtk+" rather than gtk+-fastscaling. So you'll have all the > necessary files anyway. > Thanks, I used: opkg -force-depends install http://www.tangogps.org/downloads /tangogps_0.9.5-r0_armv4t.opk but I still get the same error. (I also tried --force-depends, it seems both syntaxes are accepted). > Cheers, >Mike. > > >> Marcus Bauer wrote: >> >>> Hello, >>> >>> a new release of tangoGPS is out. Improvements are: >>> >>> - better handling of broken NMEA (some people experienced crashers) >>> - fix for correct lat/lon display for eastern longitudes and southern >>> latitudes >>> - Google has changed their URI scheme thus satellite imagery works now >>> too - anyway, there is copyright on them, just use free alternatives >>> - a cool new default repository is opencycle map >>> - the whole repository dialog is now overhauled >>> >>> ...and a couple more things. >>> >>> As usual you can get it at http://www.tangogps.org/ >>> >>> By the way, I will be at FOSDEM and spend some time at the GNOME stand. >>> Just drop by and say hello. >>> >>> Have fun >>> Marcus >>> >>> >>> ___ >>> Openmoko community mailing list >>> community@lists.openmoko.org >>> http://lists.openmoko.org/mailman/listinfo/community >>> >>> >>> >> ___ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community >> >> > > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: tangoGPS 0.9.5 is out
Fernando Martins wrote: > I'm using shr unstable (yesterday's) and I got > > * ERROR: Cannot satisfy the following dependencies for tangogps: > * gtk+-fastscaling (>= 2.10.14) * > > I tried: > > opkg install gtk+-fastscaling > > and I got: > > An error ocurred, return value: -50512. > > I'm not really familiar with opkg, but I think the packages are supposed > to come from shr/unstable/ipk, but the package is not there... Just use --force-depends, in most recent builds the gtk+ package is simply "gtk+" rather than gtk+-fastscaling. So you'll have all the necessary files anyway. Cheers, Mike. > Marcus Bauer wrote: >> Hello, >> >> a new release of tangoGPS is out. Improvements are: >> >> - better handling of broken NMEA (some people experienced crashers) >> - fix for correct lat/lon display for eastern longitudes and southern >> latitudes >> - Google has changed their URI scheme thus satellite imagery works now >> too - anyway, there is copyright on them, just use free alternatives >> - a cool new default repository is opencycle map >> - the whole repository dialog is now overhauled >> >> ...and a couple more things. >> >> As usual you can get it at http://www.tangogps.org/ >> >> By the way, I will be at FOSDEM and spend some time at the GNOME stand. >> Just drop by and say hello. >> >> Have fun >> Marcus >> >> >> ___ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community >> >> > > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
[debian] zhone not working
Zhone does not longer work after upgrading debian, export DISPLAY=:0 zhone & gives: Traceback (most recent call last): File "/usr/bin/zhone", line 61, in import edje File "/var/lib/python-support/python2.5/edje/__init__.py", line 3, in import c_edje ImportError: libevas.so.0: cannot open shared object file: No such file or directory Some idea? Thx vale -- View this message in context: http://n2.nabble.com/-debian--zhone-not-working-tp2210515p2210515.html Sent from the Openmoko Community mailing list archive at Nabble.com. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: tangoGPS 0.9.5 is out
I'm using shr unstable (yesterday's) and I got * ERROR: Cannot satisfy the following dependencies for tangogps: * gtk+-fastscaling (>= 2.10.14) * I tried: opkg install gtk+-fastscaling and I got: An error ocurred, return value: -50512. I'm not really familiar with opkg, but I think the packages are supposed to come from shr/unstable/ipk, but the package is not there... Fernando Marcus Bauer wrote: > Hello, > > a new release of tangoGPS is out. Improvements are: > > - better handling of broken NMEA (some people experienced crashers) > - fix for correct lat/lon display for eastern longitudes and southern > latitudes > - Google has changed their URI scheme thus satellite imagery works now > too - anyway, there is copyright on them, just use free alternatives > - a cool new default repository is opencycle map > - the whole repository dialog is now overhauled > > ...and a couple more things. > > As usual you can get it at http://www.tangogps.org/ > > By the way, I will be at FOSDEM and spend some time at the GNOME stand. > Just drop by and say hello. > > Have fun > Marcus > > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [shr] fso-gpsd
Am Saturday 24 January 2009 21:25:20 schrieb Petr Vanek: > could someone please shed some light on fso-gpsd for me. > > i had understood that gps chip was turned on/off depending on whether > fso-gpsd was running/not running. No. fso-gpsd running or not is not what counts. fso-gpsd is just one client for the framework, there may be others. > ow it seems that fso-gpsd should run > all the time and depending on whether it has an active client it will > turn the gps on/off? This is correct, _if_ fso-gpsd happens to be the only client for the framework. There may be others. Only if the last client releases the GPS resource, the framework will shut down GPS. > i can't seem to find dbud gps power method > anywhere... This is using the org.freesmartphone.Usage interface, see docs.freesmartphone.org -- yes I realize some introductionary material is missing. I promise to work on that after milestone5. Hope that helps, -- :M: ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
[shr] fso-gpsd
could someone please shed some light on fso-gpsd for me. i had understood that gps chip was turned on/off depending on whether fso-gpsd was running/not running. now it seems that fso-gpsd should run all the time and depending on whether it has an active client it will turn the gps on/off? i can't seem to find dbud gps power method anywhere... i run shr unstable jan 18th. thank you petr ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: which file system for sd card?
The only reason they come with FAT is so windoze can use it. That said, I don't know much about filesystems, but I would generally go with EXT2/3 over FAT. -- Thanks, The Digital Pioneer ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
which file system for sd card?
I bought a 2GB sd card which came formatted with FAT. Is this a good option for the sd card or is it advisable to use another fs? I'm using it for osm maps. Regards, Fernando ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Dead Neo 1973 - drained battery
Try leaving the battery out over night then reinserting it and charging it. I've got a neo1973 on its original battery so yours should still work You can get a very cheap battery and charger from ebay, I provided a link in a previous post http://www.mail-archive.com/community@lists.openmoko.org/msg28392.html ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
shr? - no reboot with usb linked to pc
I don't know if this is shr specific or not, but two times I left the usb cable connected to my desktop during a reboot locked om (at the splash screen). Is this known? Fernando ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
[SHR] SIM Card import/export scripts
Has anyone had trouble with importing contacts to a SIM card? I've gotten all the delete to work, but not importing. The output of my VcfToPhonebook (a pbk file) is empty. Matt ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Accelerometers in Kernel 2.6.28-rc4
On Sat, 24 Jan 2009 17:21:09 +0100 Michael Tansella wrote: > I made a mistake. I do not really get two different values I get > twice the same (3D) value but a different timestamp (see below). But > anyway this is not correct. I don't want to set a threshold, because > I need every value with an equidistant timestamp. Well, it was more to see if the behavior changes with the threshold, but anyway: > Any idea what's going wrong? Looking at http://wiki.openmoko.org/wiki/Accelerometer_data_retrieval#Data_acquisition are you sure this isn't just the synchronization events? |- time --| |type| |code| |-value-| 8c66 4819 721c 0006 0002 0002 03a8 8c66 4819 7222 0006 <--- Time looks quite close to the last non-sync events 8c66 4819 99e6 0006 0002 0048 <--- Larger time distance and real data 8c66 4819 9a36 0006 0002 0001 0024 8c66 4819 9a50 0006 0002 0002 0396 8c66 4819 9a57 0006 <--- Another sync message, small time distance I'm no expert on the data format though. // Simon ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Accelerometers in Kernel 2.6.28-rc4
> Could you test to set the threshold value to something low, e.g., 18 or > so? Also check the threshold file afterward you've set it so that it's > not zero, values which are too low to be represented by the threshold > code get rounded down. HI, I made a mistake. I do not really get two different values I get twice the same (3D) value but a different timestamp (see below). But anyway this is not correct. I don't want to set a threshold, because I need every value with an equidistant timestamp. Any idea what's going wrong? > Do you have this test program to share? I send U the binary of my C++ Acc Test tool offlist. If somebody else wants it I can send it. I attached the source code. You should use it with 2.6.28 Kernel otherwise U must set threshold and sample_rate manually because it is in a different folder. you will need to install one additional lib: opkg install libgio-2.0-0 It's a simple terminal tool use it the following way: MokoAcc [Number of Loops] [Accelerometer 1 or 2] [100 or 400 (Hz)] [threshold] for example: ./MokoAcc 10 2 100 0 and it will create a log file in the same directory: cat AccLog_Acc1.txt 455.131012 -0.528137 0.704183 5.633463 455.322998 -0.528137 0.704183 5.633463 457.576996 -0.176046 0.704183 8.978332 457.766998 -0.176046 0.704183 8.978332 460.061005 -0.352091 0.704183 8.626241 460.411987 -0.352091 0.704183 8.626241 462.503998 -0.352091 0.880229 8.626241 462.700012 -0.352091 0.880229 8.626241 484.566010 -0.352091 0.704183 8.626241 484.790009 -0.352091 0.704183 8.626241 first value is the timestamp in ms the X,Y,Z; Greets Michael AccTest.tar.gz Description: application/compressed-tar ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: SHR Unstable
> > Another thing I noticed is the phone doesn't want to suspend from the > power button menu. It just says it's going to suspend and then does > nothing. > Same thing for me. Every time I try to suspend with the power button menu, this happens to me. But if I "let" the system suspends automatically after the time set from the settings app, it works like a charm. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Sephora not working any longer?
Hi i am using Debian and i updated to new fso frameworkd but not the very helpfull tool sephora doesnt work any longer :( I always get an error: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.UnknownMethod: Method "GetPower" with signature "" on interface "org.freesmartphone.Device.PowerControl" doesn't exist I think it has to do with new framework ... is there a fix around? Thanks for hard work and great tool sephora! greetings vale -- View this message in context: http://n2.nabble.com/Sephora-not-working-any-longer--tp2208881p2208881.html Sent from the Openmoko Community mailing list archive at Nabble.com. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Is Israel a Democracy? -- The problem with intellectually insecure whites -- Should Christians Support Israeli Terrorism in Gaza?
Am Saturday 24 January 2009 12:10:29 schrieb Jos vd Snepscheut: > Sorry you must have typed the wrong URL, this list is not about that, I > think. Even better, I didn't send it in the first place, please check the full headers, it's forged. -- :M: ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: [All] To build a better music player
Dylan Reilly wrote: > > I am working on a gstreamer version ATM which will allow me to work > around the limitations of mplayer. If/when I get this done, I will > work on making a package and/or seeing if I can integrate with the > main pythm distribution. > Good to hear. The delays I saw disappeared after another restart of pythm. The only problem I see now, is that the play list no longer show. It is always empty, but the songs I selected play anyway. -- View this message in context: http://n2.nabble.com/-All--To-build-a-better-music-player-tp2164014p2208710.html Sent from the Openmoko Community mailing list archive at Nabble.com. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: SHR Unstable
Michael Sheldon wrote: > Michal Brzozowski wrote: > >> Come on, this thing is slow! Scrolling has a 2 sec latency! Totally >> unusable for me. >> >> > > You can speed up scrolling by switching to the Software_16 engine > (Spanner -> Advanced -> Engine) and reducing the framerate to around 15 > fps. This will reduce the rendering quality though. Alternative you > could use a simpler theme (like the OM2008.x theme). > > Cheers, > Mike. > Thanks, I tried and it's a little bit better. Still far from perfect though. Interestingly, the E settings top menu scrolls smoothly like a dream. Another thing I noticed is the phone doesn't want to suspend from the power button menu. It just says it's going to suspend and then does nothing. It's nice to see that SHR has now good and working basic phone apps. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Xskat for the Freerunner
On Sat, 24 Jan 2009 12:26:35 +0100, Yorick Moko wrote: > add it to opkg.org please Ok. I've added it just now (http://www.opkg.org/package_108.html) elh ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: shr- GPS howto?
satellites move, that can make a difference On Sat, Jan 24, 2009 at 12:31 PM, Fernando Martins wrote: > Thanks, arne, Helge, > > I just made my second try this morning and I got a lock in 35 secs > (tried two times, consistent lock time). 8-) > > I don't know why the different behaviors, but I did the tests inside a > party tent I've in the garden and after reading how GPS behaves in > weather (rain, cloud, snow makes no perceptible difference), the only > thing that comes to my mind is that last time the tent was probably wet > or might even had a thin layer of ice (temp was 0ºC). I don't know if it > was sufficient to compromise the reception (tent now is dry), but I'll > test it again when I get similar conditions. > > Cheers, > Fernando > > > arne anka wrote: >>> slot. If it isn't there, then your phone have this problem. >>> >> >> not necessarily. in fact, if you really have this problem you didn't >> update your kernel a very long time. >> the gps/sd card fix is in all kernels available for a very long time now, >> the hw fix is not necessary. >> >> ___ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community >> >> > > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: SHR Unstable
Michal Brzozowski wrote: > Come on, this thing is slow! Scrolling has a 2 sec latency! Totally > unusable for me. > You can speed up scrolling by switching to the Software_16 engine (Spanner -> Advanced -> Engine) and reducing the framerate to around 15 fps. This will reduce the rendering quality though. Alternative you could use a simpler theme (like the OM2008.x theme). Cheers, Mike. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: shr- GPS howto?
Thanks, arne, Helge, I just made my second try this morning and I got a lock in 35 secs (tried two times, consistent lock time). 8-) I don't know why the different behaviors, but I did the tests inside a party tent I've in the garden and after reading how GPS behaves in weather (rain, cloud, snow makes no perceptible difference), the only thing that comes to my mind is that last time the tent was probably wet or might even had a thin layer of ice (temp was 0ºC). I don't know if it was sufficient to compromise the reception (tent now is dry), but I'll test it again when I get similar conditions. Cheers, Fernando arne anka wrote: >> slot. If it isn't there, then your phone have this problem. >> > > not necessarily. in fact, if you really have this problem you didn't > update your kernel a very long time. > the gps/sd card fix is in all kernels available for a very long time now, > the hw fix is not necessary. > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Xskat for the Freerunner
add it to opkg.org please On Sat, Jan 24, 2009 at 9:59 AM, elh wrote: > Hi, > > out of curiosity I just compiled XSkat [1] (a card game) for the > Freerunner. Not much todo though. Worked almost out of the box. > So if someone wants to enjoy a game of Skat (rules and everything > on [1] if you are unfamiliar with them) against his or her > Freerunner: I've made an ipkg [2]. Tested with om2008.12 > (screenshot [4]). But it shouldn't need anything other then libX11. > For the window to fit on the screen it should be rotated first. A > little script does this automaticly (xrandr -o 3) and returns back > to normal (xrandr -o 0) after the end of the game. Just change > /usr/bin/xskat-om.sh if you like it any other way round, :). > > > Hope it works not just for me, :) > elh > > > [1] XSkat Hompage: http://www.xskat.de/xskat.html > [2] XSkat Ipkg: http://www.elste.org/downloads/xskat_4.0_armv4t.ipk (172k) > [3] XSkat Src: http://www.elste.org/downloads/xskat-4.0-om.tgz (183k) > [4] Sreenshot: http://www.elste.org/images/xskat_screenshot.png > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Is Israel a Democracy? -- The problem with intellectually insecure whites -- Should Christians Support Israeli Terrorism in Gaza?
Sorry you must have typed the wrong URL, this list is not about that, I think. greetings, Jos. Michael 'Mickey' Lauer wrote: > The Jewish State of Israel has no constitution, nor does it name its borders. > Israel's hidden constitution is Judaism. Israel's undeclared borders range > from the Nile to the Euphrates rivers. Israel's desired jurisdiction extends > over the entire Earth. > > It could not be more clear that the Jewish State follows a foreign policy > which obeys Jewish Law as iterated in the Hebrew Bible, the Talmud, > Maimonedes, the Cabalah, and the many commentaries and refinements of same. > The Jews are genociding the native inhabitants of Palestine, just as their > religion advises, and because their religion teaches them to do so. They > treat non-Jews as if non-humans, just as their religion requires them to do. > They make perpetual war on every nation on Earth, just as their genocidal > Jewish God has instructed. > > The Jews of Israel are simply being Jews. Jews are an existential threat to > the human race. > > Israel contains one third of the Jews of the World. It is not some aberration > of the Jewish spirit, but the condensation and concentration of the perverse > Jewish mentality, which malady also pervades the remaining two thirds of > Jewry, who almost unanimously support the Jewish State, and who certainly do > unanimously support the Jewish People and its consistent and constant crimes > against the human race. Israel is Jewry and the danger of Israel is the > danger of the Jewish People to all others, as the Jews have demonstrated each > and every day of their existence. > > The Jews, the entire Jewish People of 15 million, will not relent until they > have wiped out all non-Jews in "Greater Israel". They will not stop > destroying all other cultures, nations, religions, ethnicities, races, > competition, etc. until they are either stopped, or succeed in their ancient > quest to destroy the human race. > > What Israel is doing is not some reaction to outside forces, nor was the > formation of Israel a response to the Holocaust. Israel is simply following > the plan laid out in the Jews' religious texts. The Jews have openly planned > to take Palestine and genocide the native population of Palestine for some > 2,500 years before the Holocaust. The Jews have openly complained that > "anti-Semitism" is a threat that gives them the right to genocide the > Palestinians, not merely since the advent of Nazism, but for some 2,500 years. > > The Jewish religion is the Constitution of the Jewish State of Israel, and, > to a greater or lesser extent, the constitution of the nature of every Jew > alive. The borders of Israel are the range the Jew roams over the entire > World. The perverse Jewish mentality is inbred by a Jew's exposure to his > parents and to his community. Judaism passes in the spit and slobber of > Jewish mother telling her Jewish child that he is a "Jew", as much as Judaism > passes in the poison and pain of a Talmudic tractate. The secular Jews did > not suddenly come to life after the Enlightenment and the Jewish Reformation > a body of vampires that appeared ex nihilo, in vacuo, mostly atheistical and > undetached from formally practiced Judaism. Judaism is the Jew. It is a > mindset that transcends and supercedes religion. It is a belief set, a way of > life, a perception of one's self and one's relation to the World that makes a > Jew, a Jew, and a danger to all of humanity. > > In fact, the religious shell of Judaism is like the stretched and infected > skin of a lycanthropic pustule. When you lance it to cure the infection, the > virus only becomes more contagious and spills directly on the non-Jew. > > The secular Jew is a deliberate product of the hyper-religious Jew, a monster > created out of the hewed corpses of the fanatically religious Jew, a Golem > which is conjured up to enter the World of the non-Jew and poison its blood, > and boil its brain with a rabid lunacy that bites and spreads, until the > infected community feeds on itself and fills the fields with rotting bloating > bodies, where once human beings tilled the soil and tended to their families. > The religious Jew created the secular Jew as an army of Esthers who seduce > with open thighs, broad smiles, and a Siren call that lures in the non-Jew to > cast his skull upon the jagged rocks and color the seas with his blood, > sickened and blinded by the venereal disease of Judaism in secular form. > > Israel is not a secular democracy. It is a religious mockery. It is a rabid > bat flying to the ends of the Earth, to end the Earth. No one will be free > nor safe until the disease is quarantined and dies out. > > Source: > http://www.ziopedia.org/articles/israel/how_can_israel_claim_to_be_a_%27democracy%27_when_it_has_no_constitution_nor_borders?/` > > > > The problem with intellectually insecure whites > > Kevin MacD
Re: How to view Qtopia .pic files
>> was there) and running alian told me that the pre and post install >> scripts were skipped. and it should have likewise tld you "use --scripts" (if not, then it is a minor bug imho, since alien has done that for years and does still here). > However, this directory contains only a svgtopicture.pro file whichs > refers to a main.cpp that is not found anywhere. :( maybe created when running a script or so? or it will be created in the course of compilation, thus calling the .pro later on. ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Accelerometers in Kernel 2.6.28-rc4
On Sat, 24 Jan 2009 10:35:14 +0100 Michael Tansella wrote: > When I read out the Acc values I get strange values. I set the device > to 100 Hz that means I should get one (3D) value every 10 ms but I > get two even with a different time stamp whitch differs round about > 0.4 ms. Because of the axis orientation it cannot be from the second > Accelerometer. So where does this additional (3D)value come from? Two at the price of one :-) Could you test to set the threshold value to something low, e.g., 18 or so? Also check the threshold file afterward you've set it so that it's not zero, values which are too low to be represented by the threshold code get rounded down. > This log I recorded from the first accelerometer with 100 Hz. (If set > to 400 Hz I get two values every 2.5 milliseconds, the same problem) Do you have this test program to share? Thanks, // Simon ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: How to view Qtopia .pic files
Pander wrote: > Pander wrote: >> Marco Trevisan (Treviño) wrote: >>> Pander wrote: How can I view Qtopia .pic files on my Ubuntu machine and possibly convert them to PNG/SVG? >>> They could be converted back to svg, but I wasn't able to make the >>> qtopia tool work for me. >>> I suggest you to browse the Qtopia source to get the original svg files >>> from which the pic files are generated. >> Where can I download this tool? I'm interested in converting back and >> forward to this format. > > Ah, it is called svgtopicture. Building it requires installing > QtExtended SDK (.iso) via install.sh which needs VMware player (.rpm) > rpm on Debian started complaining about not finding /bin/sh (while it > was there) and running alian told me that the pre and post install > scripts were skipped. So I abandoned this path in order to keep my > system sane. > > Anyone else got svgtopicture successfully build? In qtopia-greenphone-sdk-4.3.2.iso is another iso called qtopia.iso. In there is a file called qtopia.tar.bz which contains: SDK/4.3.2/x86/src/tools/svgtopicture However, this directory contains only a svgtopicture.pro file whichs refers to a main.cpp that is not found anywhere. :( How to get hold of the sources or a build version of svgtopicture? > >> Thanks, >> >> Pander >> >> >> >> ___ >> Openmoko community mailing list >> community@lists.openmoko.org >> http://lists.openmoko.org/mailman/listinfo/community > > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
my new sms keyboard
i have personalized the default keyboard for write sms (for italian language) this is a screenshot: http://farm4.static.flickr.com/3405/3222386804_c1e62d4e9e_o.png this is the package: http://minucci.net/file/keyboard.tar.gz (untar in /usr/lib/enlightenment/modules/illume/keyboards but before backup your Default.kbd) this keyboard have two optimized button: one for write a :), and another for write a <3 ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Accelerometers in Kernel 2.6.28-rc4
I already sent this question to the hardware list, but I think it's not really a hardware problem so I post this here again. Hi, In the new Kernel of the latest FSO I noticed some changes. The config files for parameters like threshold, sample rate etc. are now in the following folders: Acc1: /sys/class/i2c-adapter/i2c-0/0-0073/lis302dl.1 Acc2: /sys/class/i2c-adapter/i2c-0/0-0073/lis302dl.2 When I read out the Acc values I get strange values. I set the device to 100 Hz that means I should get one (3D) value every 10 ms but I get two even with a different time stamp whitch differs round about 0.4 ms. Because of the axis orientation it cannot be from the second Accelerometer. So where does this additional (3D)value come from? This log I recorded from the first accelerometer with 100 Hz. (If set to 400 Hz I get two values every 2.5 milliseconds, the same problem) What's going wrong? [mili seconds] [X-Value] [Y-Value] [Z-Value] 761.370972 0.384486 -0.133511 8.770032 761.744995 0.384333 -0.133732 8.770234 771.169006 0.384194 -0.133953 8.770455 771.552002 0.384067 -0.134173 8.770696 780.945984 0.383952 -0.134391 8.770953 781.161987 0.383846 -0.134604 8.771228 790.721008 0.383749 -0.134813 8.771520 790.937012 0.383667 -0.135022 8.771827 800.564026 0.383606 -0.135238 8.772151 800.775024 0.383569 -0.135466 8.772492 810.315002 0.383556 -0.135704 8.772849 810.536011 0.383564 -0.135948 8.773211 820.111023 0.383588 -0.136196 8.773564 820.304993 0.383626 -0.136446 8.773902 829.940979 0.383677 -0.136694 8.774227 830.156006 0.383737 -0.136940 8.774551 839.75 0.383805 -0.137180 8.774886 839.966003 0.383878 -0.137413 8.775231 849.533020 0.383954 -0.137638 8.775575 849.75 0.384033 -0.137852 8.775908 Now I'm using the latest FSO but with tho old kernel an it works fine. If I should open a ticket please tell me where to do that. Best Regards Michael ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: How to view Qtopia .pic files
Pander wrote: > Marco Trevisan (Treviño) wrote: >> Pander wrote: >>> How can I view Qtopia .pic files on my Ubuntu machine and possibly >>> convert them to PNG/SVG? >> They could be converted back to svg, but I wasn't able to make the >> qtopia tool work for me. >> I suggest you to browse the Qtopia source to get the original svg files >> from which the pic files are generated. > > Where can I download this tool? I'm interested in converting back and > forward to this format. Ah, it is called svgtopicture. Building it requires installing QtExtended SDK (.iso) via install.sh which needs VMware player (.rpm) rpm on Debian started complaining about not finding /bin/sh (while it was there) and running alian told me that the pre and post install scripts were skipped. So I abandoned this path in order to keep my system sane. Anyone else got svgtopicture successfully build? > > Thanks, > > Pander > > > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: Re: SHR Unstable
Come on, this thing is slow! Scrolling has a 2 sec latency! Totally unusable for me. 2009/1/23 Steven ** > > Pressing the power button brings up a small menu. One of the options > is suspend. Suspending this way takes a few seconds, but the resume > is pretty snappy. > > -Steven > > On Fri, Jan 23, 2009 at 1:21 PM, Matthew Lane wrote: > > Luckily, I do. Can you manually suspend by tapping the power button, > > like 2008.12? And once the SMS is read, will it then automatically > > suspend? Thanks. > > > > Richy wrote: > >> The phone does suspend. Battery-life is at least a day. (without wifi). > >> > >> However, it doesn't suspend again after receiving an sms. Which is a > >> battery-killer if you don't check your phone every 20min. > >> > >> > >> > > > > ___ > > Openmoko community mailing list > > community@lists.openmoko.org > > http://lists.openmoko.org/mailman/listinfo/community > > > > ___ > Openmoko community mailing list > community@lists.openmoko.org > http://lists.openmoko.org/mailman/listinfo/community > > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Xskat for the Freerunner
Hi, out of curiosity I just compiled XSkat [1] (a card game) for the Freerunner. Not much todo though. Worked almost out of the box. So if someone wants to enjoy a game of Skat (rules and everything on [1] if you are unfamiliar with them) against his or her Freerunner: I've made an ipkg [2]. Tested with om2008.12 (screenshot [4]). But it shouldn't need anything other then libX11. For the window to fit on the screen it should be rotated first. A little script does this automaticly (xrandr -o 3) and returns back to normal (xrandr -o 0) after the end of the game. Just change /usr/bin/xskat-om.sh if you like it any other way round, :). Hope it works not just for me, :) elh [1] XSkat Hompage: http://www.xskat.de/xskat.html [2] XSkat Ipkg: http://www.elste.org/downloads/xskat_4.0_armv4t.ipk (172k) [3] XSkat Src: http://www.elste.org/downloads/xskat-4.0-om.tgz (183k) [4] Sreenshot: http://www.elste.org/images/xskat_screenshot.png ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community
Re: How to view Qtopia .pic files
Marco Trevisan (Treviño) wrote: > Pander wrote: >> How can I view Qtopia .pic files on my Ubuntu machine and possibly >> convert them to PNG/SVG? > > They could be converted back to svg, but I wasn't able to make the > qtopia tool work for me. > I suggest you to browse the Qtopia source to get the original svg files > from which the pic files are generated. Where can I download this tool? I'm interested in converting back and forward to this format. Thanks, Pander > ___ Openmoko community mailing list community@lists.openmoko.org http://lists.openmoko.org/mailman/listinfo/community