RE: [2008.12] Anyone get iptables working?

2009-01-08 Thread Nick Van Fossen

Ahh dang I should have checked my e-mail again earlier.  I followed Timo's 
suggestion to rebuild from source, and that worked like a charm.  But your fix 
would have saved me a bit of time.  If anyone wants an ipk of iptables v1.4.2 
let me know :)

Thanks everyone

-Nick

> Date: Thu, 8 Jan 2009 18:15:48 -0500
> From: freerun...@newkirk.us
> To: community@lists.openmoko.org
> CC: stix...@hotmail.com
> Subject: RE: [2008.12] Anyone get iptables working?
> 
> Try "opkg remove iptables" followed by "opkg install
> http://downloads.openmoko.org/repository/testing/armv4t/iptables_1.3.8-r4_armv4t.opk";
> 
> ;)
> 
> j
> 
> On Thu, 8 Jan 2009 13:47:56 -0800, Nick Van Fossen 
> wrote:
> > 
> > 
> > 
> >> From: timo.lindf...@iki.fi
> >> To: stix...@hotmail.com
> >> CC: community@lists.openmoko.org; timo.lindf...@iki.fi
> >> Subject: Re: [2008.12] Anyone get iptables working?
> >> Date: Thu, 8 Jan 2009 23:23:00 +0200
> >> 
> >> Nick Van Fossen  writes:
> >> > Program received signal SIGILL, Illegal instruction.
> >> > 0x9834 in ?? ()
> >> > (gdb) backtrace
> >> > #0  0x9834 in ?? ()
> >> > Cannot access memory at address 0x2
> >> > (gdb) x/5i $pc
> >> > 0x9834 <__strtoull_internal+1088>:   teqeq   pc, r5, asr r6
> >> 
> >> Very odd. teq should be perfectly legal instructions that is available
> >> on all architecture versions and does not involve exceptions.
> >> 
> >> > 0x9838 <__strtoull_internal+1092>:   cfstrsnemvf4, [r0], 
> >> > #-316
> >> 
> >> What is this? Google finds this in a list about "Cirrus Maverick
> >> co-processor support for GCC".
> >> 
> >>"the following are patches for gas, ld, opcodes, and bfd-- for the
> >> Cirrus DSP arm copprocessor (arm9e)."
> >> 
> >>"/* Cirrus DSP instructions.  */"
> >> 
> >> "+   {"cfstrs",0x0c000400, NULL,   NULL,  
> > ARM_EXT_MAVERIK, do_c_ldst_1},"
> >> 
> >> -- http://sources.redhat.com/ml/binutils/2001-10/msg00134.html
> >> 
> >> Where did you get these? :-) Please run
> >> 
> >> 1) gdb --args iptables -v -A POSTROUTING -t nat -j MASQUERADE -s
> > 192.168.0.0/24
> >> 2) run
> >> 3) shell cat /proc/`pidof iptables`/maps
> >> 
> >> so that we see what library comes with this __strtoull_internal
> >> implementation.
> > 
> > Like I said, I got iptables and iptables-utils from angstrom by adding
> the
> > angstrom repo using instructions at
> > http://wiki.openmoko.org/wiki/Repositories by creating the
> > /etc/opkg/angstrom-feed.conf file per the 2008.8 instructions
> > near the top.  Then I used commands "opkg update" followed by "opkg
> > install iptables iptables-utils".  This also 
> > updated the libgcc1 package, since iptables required a newer version than
> > the openmoko repo contained.  (this includes the libgcc_s.so.1 file
> > mentioned below)
> > 
> > -Nick
> > 
> > r...@om-gta02:/etc/opkg# gdb --args iptables -v -A POSTROUTING -t nat -j
> > MASQUERADE -s 192.168.0.0/24
> > GNU gdb 6.8
> > Copyright (C) 2008 Free Software Foundation, Inc.
> > License GPLv3+: GNU GPL version 3 or later
> > <http://gnu.org/licenses/gpl.html>
> > This is free software: you are free to change and redistribute it.
> > There is NO WARRANTY, to the extent permitted by law.  Type "show
> copying"
> > and "show warranty" for details.
> > This GDB was configured as "arm-angstrom-linux-gnueabi"...
> > (no debugging symbols found)
> > (gdb) run
> > Starting program: /usr/sbin/iptables -v -A POSTROUTING -t nat -j
> > MASQUERADE -s 192.168.0.0/24
> > (no debugging symbols found)
> > (no debugging symbols found)
> > (no debugging symbols found)
> > 
> > Program received signal SIGILL, Illegal instruction.
> > 0x9834 in ?? ()
> > (gdb) shell cat /proc/`pidof iptables`/maps
> > 8000-00021000 r-xp  1f:06 14560  /usr/sbin/iptables
> > 00028000-0002b000 rw-p 00018000 1f:06 14560  /usr/sbin/iptables
> > 0002b000-0004c000 rwxp 0002b000 00:00 0  [heap]
> > 4000-4001c000 r-xp  1f:06 582/lib/ld-2.6.1.so
> > 4002-40022000 rw-p 4002 00:00 0 
> > 40023000-40025000 rw-p 0001b000 1f:06 582/lib/ld-2.6.1.so
> > 40025000-400

RE: [2008.12] Anyone get iptables working?

2009-01-08 Thread Joel Newkirk
Try "opkg remove iptables" followed by "opkg install
http://downloads.openmoko.org/repository/testing/armv4t/iptables_1.3.8-r4_armv4t.opk";

;)

j

On Thu, 8 Jan 2009 13:47:56 -0800, Nick Van Fossen 
wrote:
> 
> 
> 
>> From: timo.lindf...@iki.fi
>> To: stix...@hotmail.com
>> CC: community@lists.openmoko.org; timo.lindf...@iki.fi
>> Subject: Re: [2008.12] Anyone get iptables working?
>> Date: Thu, 8 Jan 2009 23:23:00 +0200
>> 
>> Nick Van Fossen  writes:
>> > Program received signal SIGILL, Illegal instruction.
>> > 0x9834 in ?? ()
>> > (gdb) backtrace
>> > #0  0x9834 in ?? ()
>> > Cannot access memory at address 0x2
>> > (gdb) x/5i $pc
>> > 0x9834 <__strtoull_internal+1088>: teqeq   pc, r5, asr r6
>> 
>> Very odd. teq should be perfectly legal instructions that is available
>> on all architecture versions and does not involve exceptions.
>> 
>> > 0x9838 <__strtoull_internal+1092>: cfstrsnemvf4, [r0], #-316
>> 
>> What is this? Google finds this in a list about "Cirrus Maverick
>> co-processor support for GCC".
>> 
>>"the following are patches for gas, ld, opcodes, and bfd-- for the
>> Cirrus DSP arm copprocessor (arm9e)."
>> 
>>"/* Cirrus DSP instructions.  */"
>> 
>> "+   {"cfstrs",0x0c000400, NULL,   NULL,  
> ARM_EXT_MAVERIK, do_c_ldst_1},"
>> 
>> -- http://sources.redhat.com/ml/binutils/2001-10/msg00134.html
>> 
>> Where did you get these? :-) Please run
>> 
>> 1) gdb --args iptables -v -A POSTROUTING -t nat -j MASQUERADE -s
> 192.168.0.0/24
>> 2) run
>> 3) shell cat /proc/`pidof iptables`/maps
>> 
>> so that we see what library comes with this __strtoull_internal
>> implementation.
> 
> Like I said, I got iptables and iptables-utils from angstrom by adding
the
> angstrom repo using instructions at
> http://wiki.openmoko.org/wiki/Repositories by creating the
> /etc/opkg/angstrom-feed.conf file per the 2008.8 instructions
> near the top.  Then I used commands "opkg update" followed by "opkg
> install iptables iptables-utils".  This also 
> updated the libgcc1 package, since iptables required a newer version than
> the openmoko repo contained.  (this includes the libgcc_s.so.1 file
> mentioned below)
> 
> -Nick
> 
> r...@om-gta02:/etc/opkg# gdb --args iptables -v -A POSTROUTING -t nat -j
> MASQUERADE -s 192.168.0.0/24
> GNU gdb 6.8
> Copyright (C) 2008 Free Software Foundation, Inc.
> License GPLv3+: GNU GPL version 3 or later
> <http://gnu.org/licenses/gpl.html>
> This is free software: you are free to change and redistribute it.
> There is NO WARRANTY, to the extent permitted by law.  Type "show
copying"
> and "show warranty" for details.
> This GDB was configured as "arm-angstrom-linux-gnueabi"...
> (no debugging symbols found)
> (gdb) run
> Starting program: /usr/sbin/iptables -v -A POSTROUTING -t nat -j
> MASQUERADE -s 192.168.0.0/24
> (no debugging symbols found)
> (no debugging symbols found)
> (no debugging symbols found)
> 
> Program received signal SIGILL, Illegal instruction.
> 0x9834 in ?? ()
> (gdb) shell cat /proc/`pidof iptables`/maps
> 8000-00021000 r-xp  1f:06 14560  /usr/sbin/iptables
> 00028000-0002b000 rw-p 00018000 1f:06 14560  /usr/sbin/iptables
> 0002b000-0004c000 rwxp 0002b000 00:00 0  [heap]
> 4000-4001c000 r-xp  1f:06 582/lib/ld-2.6.1.so
> 4002-40022000 rw-p 4002 00:00 0 
> 40023000-40025000 rw-p 0001b000 1f:06 582/lib/ld-2.6.1.so
> 40025000-4002f000 r-xp  1f:06 14557  /lib/libgcc_s.so.1
> 4002f000-40036000 ---p a000 1f:06 14557  /lib/libgcc_s.so.1
> 40036000-40037000 rw-p 9000 1f:06 14557  /lib/libgcc_s.so.1
> 40037000-40148000 r-xp  1f:06 588/lib/libc-2.6.1.so
> 40148000-4015 ---p 00111000 1f:06 588/lib/libc-2.6.1.so
> 4015-40151000 r--p 00111000 1f:06 588/lib/libc-2.6.1.so
> 40151000-40153000 rw-p 00112000 1f:06 588/lib/libc-2.6.1.so
> 40153000-40156000 rw-p 40153000 00:00 0 
> be85-be865000 rwxp befeb000 00:00 0  [stack]
> (gdb) 
> 
> 
> _
> Windows Live™: Keep your life in sync. 
> http://windowslive.com/explore?ocid=TXT_TAGLM_WL_t1_allup_explore_012009
-- 
Joel Newkirk
http://jthinks.com  (blog)
http://newkirk.us/om (FR stuff)


___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


RE: [2008.12] Anyone get iptables working?

2009-01-08 Thread Nick Van Fossen

Thanks again, I'll give that a try!

-Nick

> From: timo.lindf...@iki.fi
> To: stix...@hotmail.com
> CC: timo.lindf...@iki.fi; community@lists.openmoko.org
> Subject: Re: [2008.12] Anyone get iptables working?
> Date: Fri, 9 Jan 2009 00:00:09 +0200
> 
> Nick Van Fossen  writes:
> > 8000-00021000 r-xp  1f:06 14560  /usr/sbin/iptables
> 
> Ok so the address 0x9838 is indeed inside the iptables binary which
> thus has been compiled for wrong instruction set. Go build it for
> armv4 or get a distro that has it prebuilt :-)
> 
> 
> 

_
Windows Live™: Keep your life in sync. 
http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t1_allup_howitworks_012009___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: [2008.12] Anyone get iptables working?

2009-01-08 Thread Timo Juhani Lindfors
Nick Van Fossen  writes:
> 8000-00021000 r-xp  1f:06 14560  /usr/sbin/iptables

Ok so the address 0x9838 is indeed inside the iptables binary which
thus has been compiled for wrong instruction set. Go build it for
armv4 or get a distro that has it prebuilt :-)




___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


RE: [2008.12] Anyone get iptables working?

2009-01-08 Thread Nick Van Fossen



> From: timo.lindf...@iki.fi
> To: stix...@hotmail.com
> CC: community@lists.openmoko.org; timo.lindf...@iki.fi
> Subject: Re: [2008.12] Anyone get iptables working?
> Date: Thu, 8 Jan 2009 23:23:00 +0200
> 
> Nick Van Fossen  writes:
> > Program received signal SIGILL, Illegal instruction.
> > 0x9834 in ?? ()
> > (gdb) backtrace
> > #0  0x9834 in ?? ()
> > Cannot access memory at address 0x2
> > (gdb) x/5i $pc
> > 0x9834 <__strtoull_internal+1088>:  teqeq   pc, r5, asr r6
> 
> Very odd. teq should be perfectly legal instructions that is available
> on all architecture versions and does not involve exceptions.
> 
> > 0x9838 <__strtoull_internal+1092>:  cfstrsnemvf4, [r0], #-316
> 
> What is this? Google finds this in a list about "Cirrus Maverick
> co-processor support for GCC".
> 
>"the following are patches for gas, ld, opcodes, and bfd-- for the
> Cirrus DSP arm copprocessor (arm9e)."
> 
>"/* Cirrus DSP instructions.  */"
> 
> "+   {"cfstrs",0x0c000400, NULL,   NULL,   ARM_EXT_MAVERIK, 
> do_c_ldst_1},"
> 
> -- http://sources.redhat.com/ml/binutils/2001-10/msg00134.html
> 
> Where did you get these? :-) Please run
> 
> 1) gdb --args iptables -v -A POSTROUTING -t nat -j MASQUERADE -s 
> 192.168.0.0/24
> 2) run
> 3) shell cat /proc/`pidof iptables`/maps
> 
> so that we see what library comes with this __strtoull_internal
> implementation.

Like I said, I got iptables and iptables-utils from angstrom by adding the 
angstrom repo using instructions at
http://wiki.openmoko.org/wiki/Repositories by creating the 
/etc/opkg/angstrom-feed.conf file per the 2008.8 instructions
near the top.  Then I used commands "opkg update" followed by "opkg install 
iptables iptables-utils".  This also 
updated the libgcc1 package, since iptables required a newer version than the 
openmoko repo contained.  (this includes the libgcc_s.so.1 file mentioned below)

-Nick

r...@om-gta02:/etc/opkg# gdb --args iptables -v -A POSTROUTING -t nat -j 
MASQUERADE -s 192.168.0.0/24
GNU gdb 6.8
Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "arm-angstrom-linux-gnueabi"...
(no debugging symbols found)
(gdb) run
Starting program: /usr/sbin/iptables -v -A POSTROUTING -t nat -j MASQUERADE -s 
192.168.0.0/24
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)

Program received signal SIGILL, Illegal instruction.
0x9834 in ?? ()
(gdb) shell cat /proc/`pidof iptables`/maps
8000-00021000 r-xp  1f:06 14560  /usr/sbin/iptables
00028000-0002b000 rw-p 00018000 1f:06 14560  /usr/sbin/iptables
0002b000-0004c000 rwxp 0002b000 00:00 0  [heap]
4000-4001c000 r-xp  1f:06 582/lib/ld-2.6.1.so
4002-40022000 rw-p 4002 00:00 0 
40023000-40025000 rw-p 0001b000 1f:06 582/lib/ld-2.6.1.so
40025000-4002f000 r-xp  1f:06 14557  /lib/libgcc_s.so.1
4002f000-40036000 ---p a000 1f:06 14557  /lib/libgcc_s.so.1
40036000-40037000 rw-p 9000 1f:06 14557  /lib/libgcc_s.so.1
40037000-40148000 r-xp  1f:06 588/lib/libc-2.6.1.so
40148000-4015 ---p 00111000 1f:06 588/lib/libc-2.6.1.so
4015-40151000 r--p 00111000 1f:06 588/lib/libc-2.6.1.so
40151000-40153000 rw-p 00112000 1f:06 588/lib/libc-2.6.1.so
40153000-40156000 rw-p 40153000 00:00 0 
be85-be865000 rwxp befeb000 00:00 0  [stack]
(gdb) 


_
Windows Live™: Keep your life in sync. 
http://windowslive.com/explore?ocid=TXT_TAGLM_WL_t1_allup_explore_012009___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: [2008.12] Anyone get iptables working?

2009-01-08 Thread Timo Juhani Lindfors
Nick Van Fossen  writes:
> Program received signal SIGILL, Illegal instruction.
> 0x9834 in ?? ()
> (gdb) backtrace
> #0  0x9834 in ?? ()
> Cannot access memory at address 0x2
> (gdb) x/5i $pc
> 0x9834 <__strtoull_internal+1088>:teqeq   pc, r5, asr r6

Very odd. teq should be perfectly legal instructions that is available
on all architecture versions and does not involve exceptions.

> 0x9838 <__strtoull_internal+1092>:cfstrsnemvf4, [r0], #-316

What is this? Google finds this in a list about "Cirrus Maverick
co-processor support for GCC".

   "the following are patches for gas, ld, opcodes, and bfd-- for the
Cirrus DSP arm copprocessor (arm9e)."

   "/* Cirrus DSP instructions.  */"

"+   {"cfstrs",0x0c000400, NULL,   NULL,   ARM_EXT_MAVERIK, 
do_c_ldst_1},"

-- http://sources.redhat.com/ml/binutils/2001-10/msg00134.html

Where did you get these? :-) Please run

1) gdb --args iptables -v -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24
2) run
3) shell cat /proc/`pidof iptables`/maps

so that we see what library comes with this __strtoull_internal
implementation.

___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


[2008.12] Anyone get iptables working?

2009-01-08 Thread Nick Van Fossen

>>Which instruction is it? Use the following to find out
>>
>>1) gdb --args iptables -v -A POSTROUTING -t nat -j MASQUERADE -s 
>>192.168.0.0/24
>>2) run
>>3) backtrace
>>4) x/5i $pc
>>5) info register

>>Better Cc: me on your reply since I might not notice your reply on the
>>mailing list due to heavy traffic :-)

---

Thanks for the response.  Below is the output.  

-Nick

r...@om-gta02:~# gdb --args iptables -v -A POSTROUTING -t nat -j MASQUERADE -s 1
92.168.0.0/24
GNU gdb 6.8
Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later 
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "arm-angstrom-linux-gnueabi"...
(no debugging symbols found)
(gdb) run
Starting program: /usr/sbin/iptables -v -A POSTROUTING -t nat -j MASQUERADE -s 
192.168.0.0/24
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)

Program received signal SIGILL, Illegal instruction.
0x9834 in ?? ()
(gdb) backtrace
#0  0x9834 in ?? ()
Cannot access memory at address 0x2
(gdb) x/5i $pc
0x9834 <__strtoull_internal+1088>:  teqeq   pc, r5, asr r6
0x9838 <__strtoull_internal+1092>:  cfstrsnemvf4, [r0], #-316
0x983c <__strtoull_internal+1096>:  ldcne   6, cr2, [r12]
0x9840 <__strtoull_internal+1100>:  ldrtmi  r3, [r4], r12, lsl #8
0x9844 <__strtoull_internal+1104>:  blcc0x3108d8
(gdb) info register
r0 0x2b048  176200
r1 0x2895c  166236
r2 0x8002   2147483650
r3 0x19084  102532
r4 0x2a1f8  172536
r5 0x2876c  165740
r6 0x2  2
r7 0x1f0496
r8 0x2a1e4  172516
r9 0x2b048  176200
r100x1f 31
r110x2  2
r120x10 16
sp 0xbe866ab8   0xbe866ab8
lr 0x67 103
pc 0x9834   0x9834 <__strtoull_internal+1088>
fps0x100100016781312
cpsr   0x4010   1073741840
(gdb) 


_
Windows Live™ Hotmail®: Chat. Store. Share. Do more with mail. 
http://windowslive.com/howitworks?ocid=TXT_TAGLM_WL_t1_hm_justgotbetter_howitworks_012009___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


Re: [2008.12] Anyone get iptables working?

2009-01-08 Thread Timo Juhani Lindfors
Nick Van Fossen  writes:
> I've noticed that most but not all iptables commands generate the
> same "Illegal instruction" error as well.  Has anyone got around
> this yet?

Which instruction is it? Use the following to find out

1) gdb --args iptables -v -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24
2) run
3) backtrace
4) x/5i $pc
5) info register

Better Cc: me on your reply since I might not notice your reply on the
mailing list due to heavy traffic :-)



___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community


[2008.12] Anyone get iptables working?

2009-01-08 Thread Nick Van Fossen

So, with 2008.9 I was using iptables to tether my ubuntu laptop to my 
freerunner's gprs connection.  
But as of 2008.12 I'm getting an "Illegal instruction" error each time I run 
the iptables command.  

Commands I run on the freerunner to enable tethering after gprs connection:
iptables -v -A POSTROUTING -t nat -j MASQUERADE -s 192.168.0.0/24
sysctl -w net.ipv4.ip_forward=1

I've noticed that most but not all iptables commands generate the same "Illegal 
instruction" error as well.  
Has anyone got around this yet?

I've installed iptables, iptables-utils, and upgraded libgcc1 to v4.2.4-r5.1 
from the angstrom repository.  

-Nick

_
Windows Live™ Hotmail®: Chat. Store. Share. Do more with mail. 
http://windowslive.com/explore?ocid=TXT_TAGLM_WL_t1_hm_justgotbetter_explore_012009___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community