Re: [concordance-devel] concordance fails to identify Harmony Remote 650

[Scott Talbert]

OK, the PPA should be fixed for congruity.

On Thu, 9 Jun 2016, Robin wrote:

> Scott, thank you. I was finding that despite a lot of effort I could not 
> install concordance manually. I have just updated concordance in  Synaptic. 
> Whilst I was there I also updated congruity, which was the other item in the 
> ppa,  but there was an error as per attached.
>
> Robin
>> Scott Talbert wrote on 09/06/16 04:42:
>> 
>> 
>> Here it is:
>> https://launchpad.net/~swt-techie/+archive/ubuntu/concordance
>> 
>> Scott
>> 
>> On Wed, 8 Jun 2016, Robin wrote:
>> 
>>> Thank you for offering to put it in a PPA. I really appreciate that
>>> help. Let me know when it is ready.
>>> 
>>> Robin
 Scott Talbert wrote on 08/06/16 19:02:
 
 
 On Wed, 8 Jun 2016, Robin wrote:
 
> Scott
> 
> Is the latest version in a repository, which I can use to update? I am
> not doing well with the manual method because I do not know where all
> the required files are kept at the site. If the latest version is not in
> a pre-compiled format, then I have some questions:
 
 It is not currently, but I can probably throw it into a PPA for you.
 Give me a few hours though.
 
 Scott
 
>>> 
>>> 
>>>
>>> 
>>> --
>>>  
>>> What NetFlow Analyzer can do for you? Monitors network bandwidth and 
>>> traffic
>>> patterns at an interface-level. Reveals which users, apps, and protocols 
>>> are
>>> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
>>> J-Flow, sFlow and other flows. Make informed decisions using capacity
>>> planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
>>> ___
>>> concordance-devel mailing list
>>> concordance-devel@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/concordance-devel
>>> 
>> 
>
>
>

--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity 
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
___
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel

Re: [concordance-devel] concordance fails to identify Harmony Remote 650

[Scott Talbert]

I think I see the problem with the congruity package - I'll fix it later.

Does the updated concordance at least let you run 'concordance -iv' 
without having to reboot?

Scott

On Thu, 9 Jun 2016, Robin wrote:

> Scott, thank you. I was finding that despite a lot of effort I could not 
> install concordance manually. I have just updated concordance in  Synaptic. 
> Whilst I was there I also updated congruity, which was the other item in the 
> ppa,  but there was an error as per attached.
>
> Robin
>> Scott Talbert wrote on 09/06/16 04:42:
>> 
>> 
>> Here it is:
>> https://launchpad.net/~swt-techie/+archive/ubuntu/concordance
>> 
>> Scott
>> 
>> On Wed, 8 Jun 2016, Robin wrote:
>> 
>>> Thank you for offering to put it in a PPA. I really appreciate that
>>> help. Let me know when it is ready.
>>> 
>>> Robin
 Scott Talbert wrote on 08/06/16 19:02:
 
 
 On Wed, 8 Jun 2016, Robin wrote:
 
> Scott
> 
> Is the latest version in a repository, which I can use to update? I am
> not doing well with the manual method because I do not know where all
> the required files are kept at the site. If the latest version is not in
> a pre-compiled format, then I have some questions:
 
 It is not currently, but I can probably throw it into a PPA for you.
 Give me a few hours though.
 
 Scott
 
>>> 
>>> 
>>>
>>> 
>>> --
>>>  
>>> What NetFlow Analyzer can do for you? Monitors network bandwidth and 
>>> traffic
>>> patterns at an interface-level. Reveals which users, apps, and protocols 
>>> are
>>> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
>>> J-Flow, sFlow and other flows. Make informed decisions using capacity
>>> planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
>>> ___
>>> concordance-devel mailing list
>>> concordance-devel@lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/concordance-devel
>>> 
>> 
>
>
>

--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity 
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
___
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel

Re: [concordance-devel] concordance fails to identify Harmony Remote 650

[Scott Talbert]

Here it is:
https://launchpad.net/~swt-techie/+archive/ubuntu/concordance

Scott

On Wed, 8 Jun 2016, Robin wrote:

> Thank you for offering to put it in a PPA. I really appreciate that
> help. Let me know when it is ready.
>
> Robin
>> Scott Talbert wrote on 08/06/16 19:02:
>>
>>
>> On Wed, 8 Jun 2016, Robin wrote:
>>
>>> Scott
>>>
>>> Is the latest version in a repository, which I can use to update? I am
>>> not doing well with the manual method because I do not know where all
>>> the required files are kept at the site. If the latest version is not in
>>> a pre-compiled format, then I have some questions:
>>
>> It is not currently, but I can probably throw it into a PPA for you.
>> Give me a few hours though.
>>
>> Scott
>>
>
>
>
> --
> What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
> patterns at an interface-level. Reveals which users, apps, and protocols are
> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
> J-Flow, sFlow and other flows. Make informed decisions using capacity
> planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
> ___
> concordance-devel mailing list
> concordance-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/concordance-devel
>

--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity 
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
___
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel

Re: [concordance-devel] concordance fails to identify Harmony Remote 650

[Robin]

Thank you for offering to put it in a PPA. I really appreciate that 
help. Let me know when it is ready.

Robin
> Scott Talbert wrote on 08/06/16 19:02:
>
>
> On Wed, 8 Jun 2016, Robin wrote:
>
>> Scott
>>
>> Is the latest version in a repository, which I can use to update? I am
>> not doing well with the manual method because I do not know where all
>> the required files are kept at the site. If the latest version is not in
>> a pre-compiled format, then I have some questions:
>
> It is not currently, but I can probably throw it into a PPA for you.  
> Give me a few hours though.
>
> Scott
>



--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity 
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
___
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel

Re: [concordance-devel] concordance fails to identify Harmony Remote 650

[Scott Talbert]

On Wed, 8 Jun 2016, Robin wrote:

> Scott
>
> Is the latest version in a repository, which I can use to update? I am
> not doing well with the manual method because I do not know where all
> the required files are kept at the site. If the latest version is not in
> a pre-compiled format, then I have some questions:

It is not currently, but I can probably throw it into a PPA for you.  Give 
me a few hours though.

Scott

--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity 
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
___
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel

Re: [concordance-devel] concordance fails to identify Harmony Remote 650

[Robin]

Scott

Is the latest version in a repository, which I can use to update? I am 
not doing well with the manual method because I do not know where all 
the required files are kept at the site. If the latest version is not in 
a pre-compiled format, then I have some questions:

   The instructions say:

>
> 0. INSTALL REQUIRED SOFTWARE
>
>   A. You *MUST* install libusb. This library is in most distributions, so
>  apt-get/yum/up2date/urpmi/etc. it.
>
>  If you're compiling from source, you'll also need the libusb 
> development
>  package - usually libusb-dev or libusb-devel, depending on your
>  distribution.
Installed from synaptic for previous installation
>
>   B. Install libconcord - also from the concordance project. See the 
> install
>  instructions provided with libconcord.
>
Where is libconcord?
https://sourceforge.net/projects/concordance/files/
>
> 1. BUILD THE SOFTARE
>
>As a normal user...
>  A. ***IF You are building from CVS, run:
> mkdir m4; autoreconf --install
> B. Run "./configure"
>  C. Run "make"
0.A libusb: installed from
> robins@robins-desktop:/media/robins/xhd_old_bacs/audio_visual/Ubuntu 
> programs/Concordance harmony 
> remote/Applications/concordance-1.2/concordance$ mkdir m4; autoreconf 
> --install
> mkdir: cannot create directory ‘m4’: File exists
> Can't exec "libtoolize": No such file or directory at 
> /usr/share/autoconf/Autom4te/FileUtils.pm line 345,  line 5.
Where do I find libtoolize?
> autoreconf: failed to run libtoolize: No such file or directory
> autoreconf: libtoolize is needed because this package uses Libtool
> robins@robins-desktop:/media/robins/xhd_old_bacs/audio_visual/Ubuntu 
> programs/Concordance harmony 
> remote/Applications/concordance-1.2/concordance$
>
What is CVS?
Has mkdir failed because i did not use sudo? It does not show it in the 
help file.

Robin


> Scott Talbert wrote on 08/06/16 14:23:
>
>
> On Wed, 8 Jun 2016, Robin wrote:
>
>> I ignored the referral to the  myharmony website. Previously, I have
>> used the old site even when the message says that I should go to
>> myharmony. I am asking for help at the moment because the usb connected
>> remote is being recognised by concordance  the first attempt at checking
>> it is present, but thereafter it has the error messages and the remote
>> is not recognised until I reboot the system.
>
> Try using the latest version.  1.0 is rather old and the problem you 
> are reporting sounds familiar, although I can't seem to find anything 
> in the commit history.
>
> Scott
>

Robin


--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity 
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
___
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel

Re: [concordance-devel] concordance fails to identify Harmony Remote 650

[Scott Talbert]

On Wed, 8 Jun 2016, Robin wrote:

> I ignored the referral to the  myharmony website. Previously, I have
> used the old site even when the message says that I should go to
> myharmony. I am asking for help at the moment because the usb connected
> remote is being recognised by concordance  the first attempt at checking
> it is present, but thereafter it has the error messages and the remote
> is not recognised until I reboot the system.

Try using the latest version.  1.0 is rather old and the problem you are 
reporting sounds familiar, although I can't seem to find anything in the 
commit history.

Scott

--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity 
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
___
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel

Re: [concordance-devel] concordance fails to identify Harmony Remote 650

[Robin]

I ignored the referral to the  myharmony website. Previously, I have 
used the old site even when the message says that I should go to 
myharmony. I am asking for help at the moment because the usb connected 
remote is being recognised by concordance  the first attempt at checking 
it is present, but thereafter it has the error messages and the remote  
is not recognised until I reboot the system.

Robin


> Parker Reed wrote on 08/06/16 13:09:
>
>
> 1.2 is the latest but even then the 650 is a myharmony remote. mhgui 
> is used for that. I'm not sure if the learning works for it.
>
> On Jun 8, 2016 7:54 AM, "Robin"  > wrote:
>
>
> > Phil Dibowitz wrote on 08/06/16 11:38:
> >
> >
> > What version of libconcord/concordance are you on?
> 1.0-2ubuntu1
> >
> >
> >
> >
> 
> --
> > What NetFlow Analyzer can do for you? Monitors network bandwidth
> and traffic
> > patterns at an interface-level. Reveals which users, apps, and
> protocols are
> > consuming the most bandwidth. Provides multi-vendor support for
> NetFlow,
> > J-Flow, sFlow and other flows. Make informed decisions using
> capacity
> > planning reports.
> https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
> >
> >
> > ___
> > concordance-devel mailing list
> > concordance-devel@lists.sourceforge.net
> 
> > https://lists.sourceforge.net/lists/listinfo/concordance-devel
>
>
>
> 
> --
> What NetFlow Analyzer can do for you? Monitors network bandwidth
> and traffic
> patterns at an interface-level. Reveals which users, apps, and
> protocols are
> consuming the most bandwidth. Provides multi-vendor support for
> NetFlow,
> J-Flow, sFlow and other flows. Make informed decisions using capacity
> planning reports.
> https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
> ___
> concordance-devel mailing list
> concordance-devel@lists.sourceforge.net
> 
> https://lists.sourceforge.net/lists/listinfo/concordance-devel
>



--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity 
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
___
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel

Re: [concordance-devel] concordance fails to identify Harmony Remote 650

[Parker Reed]

1.2 is the latest but even then the 650 is a myharmony remote. mhgui is
used for that. I'm not sure if the learning works for it.


On Jun 8, 2016 7:54 AM, "Robin"  wrote:

>
> > Phil Dibowitz wrote on 08/06/16 11:38:
> >
> >
> > What version of libconcord/concordance are you on?
> 1.0-2ubuntu1
> >
> >
> >
> >
> --
> > What NetFlow Analyzer can do for you? Monitors network bandwidth and
> traffic
> > patterns at an interface-level. Reveals which users, apps, and protocols
> are
> > consuming the most bandwidth. Provides multi-vendor support for NetFlow,
> > J-Flow, sFlow and other flows. Make informed decisions using capacity
> > planning reports.
> https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
> >
> >
> > ___
> > concordance-devel mailing list
> > concordance-devel@lists.sourceforge.net
> > https://lists.sourceforge.net/lists/listinfo/concordance-devel
>
>
>
>
> --
> What NetFlow Analyzer can do for you? Monitors network bandwidth and
> traffic
> patterns at an interface-level. Reveals which users, apps, and protocols
> are
> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
> J-Flow, sFlow and other flows. Make informed decisions using capacity
> planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
> ___
> concordance-devel mailing list
> concordance-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/concordance-devel
>
--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity 
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e___
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel

Re: [concordance-devel] concordance fails to identify Harmony Remote 650

[Robin]

> Phil Dibowitz wrote on 08/06/16 11:38:
>
>
> What version of libconcord/concordance are you on?
1.0-2ubuntu1
>
>
>
> --
> What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
> patterns at an interface-level. Reveals which users, apps, and protocols are
> consuming the most bandwidth. Provides multi-vendor support for NetFlow,
> J-Flow, sFlow and other flows. Make informed decisions using capacity
> planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
>
>
> ___
> concordance-devel mailing list
> concordance-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/concordance-devel



--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity 
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e
___
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel

Re: [concordance-devel] concordance fails to identify Harmony Remote 650

[Phil Dibowitz]

What version of libconcord/concordance are you on?


-- 
Phil Dibowitz p...@ipom.com
Open Source software and tech docsInsanity Palace of Metallica
http://www.phildev.net/   http://www.ipom.com/

"Be who you are and say what you feel, because those who mind don't matter
 and those who matter don't mind."
 - Dr. Seuss



signature.asc
Description: PGP signature
--
What NetFlow Analyzer can do for you? Monitors network bandwidth and traffic
patterns at an interface-level. Reveals which users, apps, and protocols are 
consuming the most bandwidth. Provides multi-vendor support for NetFlow, 
J-Flow, sFlow and other flows. Make informed decisions using capacity 
planning reports. https://ad.doubleclick.net/ddm/clk/305295220;132659582;e___
concordance-devel mailing list
concordance-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/concordance-devel