[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 --- Additional Comments From [EMAIL PROTECTED] 2003-02-06 18:00 --- Installing 9.1 Beta3 fails on my computer. I am presented with the very first screen and advised to choose 'enter' or type 'expert' or other specific command, but no matter what I do, the computer spins for awhile, then reboots to present me with the exact same screen again. My first drive is on the hpt374 controller, but I can't even use the 'expert' option to try another module. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880
--- Additional Comments From [EMAIL PROTECTED] 2003-02-04 13:48 ---
I tried and tried with different boot parameters and I still can't access the
drive on HighPoint contrller. I laso get a lot of errors like these during bootup:
hde: read_intr: status=0x51 { DriveReady SeekComplete Error }
hde: read_intr: error=0x04 { DriveStatusError }
hde: read_intr: status=0x51 { DriveReady SeekComplete Error }
hde: read_intr: error=0x04 { DriveStatusError }
hde: read_intr: status=0x51 { DriveReady SeekComplete Error }
hde: read_intr: error=0x04 { DriveStatusError }
hde: read_intr: status=0x51 { DriveReady SeekComplete Error }
hde: read_intr: error=0x04 { DriveStatusError }
ide2: reset: success
hde: read_intr: status=0x51 { DriveReady SeekComplete Error }
hde: read_intr: error=0x04 { DriveStatusError }
end_request: I/O error, dev 21:00 (hde), sector 2
hde: read_intr: status=0x51 { DriveReady SeekComplete Error }
hde: read_intr: error=0x04 { DriveStatusError }
hde: read_intr: status=0x51 { DriveReady SeekComplete Error }
hde: read_intr: error=0x04 { DriveStatusError }
hde: read_intr: status=0x51 { DriveReady SeekComplete Error }
hde: read_intr: error=0x04 { DriveStatusError }
hde: read_intr: status=0x51 { DriveReady SeekComplete Error }
hde: read_intr: error=0x04 { DriveStatusError }
ide2: reset: success
hde: read_intr: status=0x51 { DriveReady SeekComplete Error }
hde: read_intr: error=0x04 { DriveStatusError }
hde: read_intr: status=0x51 { DriveReady SeekComplete Error }
hde: read_intr: error=0x04 { DriveStatusError }
hde: read_intr: status=0x51 { DriveReady SeekComplete Error }
hde: read_intr: error=0x04 { DriveStatusError }
hde: read_intr: status=0x51 { DriveReady SeekComplete Error }
hde: read_intr: error=0x04 { DriveStatusError }
ide2: reset: success
hde: read_intr: status=0x51 { DriveReady SeekComplete Error }
hde: read_intr: error=0x04 { DriveStatusError }
end_request: I/O error, dev 21:00 (hde), sector 4
--- You are receiving this mail because: ---
You are on the CC list for the bug, or are watching someone who is.
--- Reminder: ---
assigned_to: [EMAIL PROTECTED]
description:
I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only
thing I get on screen is some debug info and some error message about /dev/hde.
On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do
is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID
controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots
just fine on the same computer. The BIOS version is A9 and the BIOS version of
HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 --- Additional Comments From [EMAIL PROTECTED] 2003-02-01 23:56 --- I just installed Beta 3 and it still doesn't quite work. If I start my computer with Linux it doesn work and I get the same problem as before. But if I start the computer witj Linux-NonFB it boots just fine. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 --- Additional Comments From [EMAIL PROTECTED] 2003-02-02 05:35 --- To follow up: 9.1 beta3 is installed and booting from a drive on the hpt372 controller on Iwill XP 333-R, latest bios. DMA is automatically enabled on all hd disks and everything seems to be working well for my setup. Hopefully, this will also work for the many posters at MUO Board and Club who have run into non-usability problems with this controller and at least parity has been achieved with the reportedly functional Red Hat, SUSE, and Knoppix kernels. I don't do RAID, so maybe someone else could test that. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 --- Additional Comments From [EMAIL PROTECTED] 2003-01-30 13:01 --- So it look working with latest kernel, please report me if it does resolv all the issues ? --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 --- Additional Comments From [EMAIL PROTECTED] 2003-01-30 00:45 --- My old Maxtor drive coincidentally died, so I waited until I could install a new Seagate on my hpt372 onboard Iwill XP333-R to report. Running 2.4.21pre3-3mdk on Mandrake Linux Cooker-i586 20030129 22:20. DiskDrake made and reiserfs formatted a partition on this new drive on this controller, I rsynced about 2G onto it, apparently successfully, wrote 1511329366 bytes read 320884 bytes 2608542.28 bytes/sec total size is 2011285280 speedup is 1.33, viewing jpegs, playing oggs, etc. # hdparm -tT /dev/hdg /dev/hdg: Timing buffer-cache reads: 128 MB in 0.48 seconds =266.67 MB/sec Timing buffered disk reads: 64 MB in 1.59 seconds = 40.25 MB/sec Thanks for implementing these patches as it appears to work here. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 --- Additional Comments From [EMAIL PROTECTED] 2003-01-22 12:33 --- Sounds good it mean that i just screwd up the compile of the kernel but it doen't get shock on the kernel. I ask juan to include it and should be fine. I don't close a bug until we get a new kernel. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 --- Additional Comments From [EMAIL PROTECTED] 2003-01-22 16:21 --- If anyone could give me some more explicite instructions, I could see if this 'IDE Backport from AC kernel' would solve the problem I had that was added to this bug report (789). Keep in mind though, that I have yet to get anything installed. For me, the install freezes, so I need help knowing how to use this kernel during the install process. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 --- Additional Comments From [EMAIL PROTECTED] 2003-01-22 16:25 --- It's planned to get integrated in mainline kernel where you can test directly from cooker. Please report problem's here. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 --- Additional Comments From [EMAIL PROTECTED] 2003-01-21 10:57 --- I'm using an ABIT KT333 RAID with chipset HPT372, and encountering the same problem. For having a working pc, i had to recompile my kernel and a a proprietary driver (see http://steletch.free.fr, section Matériel). however with 9.0, the pc boots. With 9.1 beta1, the installation wents fine, but the boot process hangs with a kernel panic. Everything went fine if i disable the raid chipset in the bios. I also tried nodma and acpi stuff with no more luck. The problem is the same ... Stef --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 [EMAIL PROTECTED] changed: What|Removed |Added CC||[EMAIL PROTECTED] --- Additional Comments From [EMAIL PROTECTED] 2003-01-21 13:00 --- On the Linux Kernel somebody said about the HPT370 problem : http://groups.google.com/groups?hl=enlr=ie=UTF-8oe=UTF-8selm=3DF4A736.9010104%40dejong.info , | Well it is about timing indeed. It turned out that as a result for | a quest for speed, some time ago, I left the pci bus running as 35Mhz. | | As soon as I reset it to 33Mhz the attached drive was detected and | kernel panics dissapeard. (Redhat kernel 2.4.18..., 2.4.20-ac1. ) | Other I have not tested. ` Would be great if someone test and tell me if it works or not. --- Additional Comments From [EMAIL PROTECTED] 2003-01-21 13:40 --- , | Jure Repinc [EMAIL PROTECTED] writes: | | Would be great if someone test and tell me if it works or not. | It doesn't. I have nothing overclocked in my system (I just checked | again to make sure) and it doesn't work. ` , | Teletchéa Stéphane [EMAIL PROTECTED] writes: | It doesn't. I have nothing overclocked in my system (I just checked | again to make sure) and it doesn't work. | | So don't i (HPT372) and i encounter the same problems. (for 9.0, i've | resolved it by installing the proprietary driver). | Stef ` Sounds bad, i wil give a look to the kernel patch, some of you may be able to boot a test kernel ? PS: Please continue to Cc: the bugzilla bug. --- Additional Comments From [EMAIL PROTECTED] 2003-01-21 13:40 --- Le mar 21/01/2003 à 13:33, Chmouel Boudjnah a écrit : I'm your man. Stef Linux 2.4.19-16mdk #1 Fri Sep 20 18:15:05 CEST 2002 1:00pm up 11 days, 52 min, 3 users, load average: 1.52, 1.16, 1.04 --- Additional Comments From [EMAIL PROTECTED] 2003-01-21 13:56 --- *** Bug 789 has been marked as a duplicate of this bug. *** --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 --- Additional Comments From [EMAIL PROTECTED] 2003-01-21 17:28 --- With Iwill XP333-R, which uses the hpt372 onboard controller, I have been building a kernel and the hpt driver to use a Maxtor and Seagate as jbod (sda, sdb) on this controller. Following the kernel list infos about ac1 support for this controller, I have built a 2.4.20-ac1. As hde and hdg, these disks seem to be working well with this kernel: hdparm shows dma enabled; md5sum of isos working correctly. I have not used this extensively but the success of these rudimentary tests is in sharp contrast to the typical failure to mount with previous Mandrake kernels. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 --- Additional Comments From [EMAIL PROTECTED] 2003-01-21 18:05 --- Created an attachment (id=101) -- (https://qa.mandrakesoft.com/attachment.cgi?id=101action=view) IDE Backport from AC kernel --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 --- Additional Comments From [EMAIL PROTECTED] 2003-01-21 18:11 --- Sounds like the ac kernel works, i made a patch with the update of ide subsytem from the AC kernels. Would someone has the power to recompile a kernel with this patch applied and test ? --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 --- Additional Comments From [EMAIL PROTECTED] 2003-01-21 19:40 --- People who get problem with HPT370 and NFORCE2 ide i have a patch (cf: bugzilla attach) and i did a tarball kernel to test it: get the kernel from https://qa.mandrakesoft.com/~chmou/kernel/kernel-2.4.21-pre3q1.tar.bz2 untar it with : tar tvjf kernel-2.4.21-pre3q1.tar.bz2 -C / do a depmod -a and reconfigure your lilo/grub to reboot under this kernel (you may have to regenerate also an initrd). Report on bugzilla sucess/failure please. Cheers. --- Additional Comments From [EMAIL PROTECTED] 2003-01-21 22:57 --- Created an attachment (id=103) -- (https://qa.mandrakesoft.com/attachment.cgi?id=103action=view) screen at freeze --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 --- Additional Comments From [EMAIL PROTECTED] 2003-01-21 22:58 --- With the Iwill XP333-R, hpt372 onboard controller, I installed kernel-2.4.21-pre3q1.tar.bz2 and chmod a-x /boot/vmlinuz-2.4.21-pre3q1, as all the x-bits were on, did depmod -a, mkinitrd, add grub entry and reboot. Progress stopped during or just after disk identification (I saw something about a floppy and queues(?)) with a kernel panic. Reset required. Picture taken of screen at freeze is attached. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 --- Additional Comments From [EMAIL PROTECTED] 2003-01-22 04:26 --- Created an attachment (id=105) -- (https://qa.mandrakesoft.com/attachment.cgi?id=105action=view) screen at freeze While the last attempt with this kernel was on my 9.0 install, I tried this on a 9.1beta2 install. Whereas I used simply depmod -a after installing previously, this time I did depmod -a 2.4.21-pre3q1 -F /boot/System.map-2.4.21-pre3q1 This time, the screen is somewhat different at freeze and, although it references an ext2 /, this / is installed on reiserfs, if that matters. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEW Ever Confirmed||1 --- Additional Comments From [EMAIL PROTECTED] 2003-01-20 11:31 --- Can yout try to put at the command line of your bootloader the arguments : ide=nodma and maybe also : acpi=off --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 --- Additional Comments From [EMAIL PROTECTED] 2003-01-20 20:06 --- Where can I find command line for LILO? --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880
--- Additional Comments From [EMAIL PROTECTED] 2003-01-20 20:40 ---
http://www.ibiblio.org/mdw/HOWTO/BootPrompt-HOWTO-2.html#ss2.2
--- Additional Comments From [EMAIL PROTECTED] 2003-01-20 21:59 ---
OK. I pressed Esc at the Mandrake boot menu to get to the lilo boot prompt. I
tried all these:
linux ide=nodma
linux acpi=off
linux ide=nodma acpi=off
And I still got the debug nessage.
I also tried to boot with failsafe and I also got the debug message. It only had
this at the start:
hde: status error: status=0x58 { DriveReady SeekComplete DataRequest }
hde: drive not ready for command
hde: 681472 sectors (349 MB) w/44KiB cache, CHS=88/88/88
an this added at the end:
spurious 8259A interrupt: IRQ7
If this helps, the drive connected to RAID controller is IBM DHEA-38451 ATA 33
and it has 8.45 GB.
--- You are receiving this mail because: ---
You are on the CC list for the bug, or are watching someone who is.
--- Reminder: ---
assigned_to: [EMAIL PROTECTED]
description:
I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only
thing I get on screen is some debug info and some error message about /dev/hde.
On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do
is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID
controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots
just fine on the same computer. The BIOS version is A9 and the BIOS version of
HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 --- Additional Comments From [EMAIL PROTECTED] 2003-01-20 22:51 --- Maybe these articles from Linux-kernel can help : http://groups.google.com/groups?hl=enlr=ie=UTF-8oe=UTF-8selm=3DF26DF4.F1692AFA%40digeo.com http://groups.google.com/groups?hl=enlr=ie=UTF-8oe=UTF-8selm=3DF4A736.9010104%40dejong.info --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 [EMAIL PROTECTED] changed: What|Removed |Added Severity|blocker |critical Status|ASSIGNED|RESOLVED Resolution||WORKSFORME --- Additional Comments From [EMAIL PROTECTED] 2003-01-20 23:49 --- Ok we need to have to find this card somewhere in our lab to be able to fix it. Blind fix doen't work always *GRIN* --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
[Cooker] [Bug 880] [kernel] New: Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 Product: kernel Component: booting Summary: Can't boot because of HighPoint HPT370 RAID Version: 2.4.21-0.pre3.1mdk Platform: PC OS/Version: All Status: UNCONFIRMED Severity: blocker Priority: P1 AssignedTo: [EMAIL PROTECTED] ReportedBy: [EMAIL PROTECTED] I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34. --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is.
[Cooker] [Bug 880] [kernel] Can't boot because of HighPoint HPT370 RAID
https://qa.mandrakesoft.com/show_bug.cgi?id=880 --- Additional Comments From [EMAIL PROTECTED] 2003-01-19 00:06 --- I took some time and wrote down the last screen I see. Here it is (I hope all is correct): Linux 2.4.21-0.pre3.1mdk [Mandrake logo is shown here] hde: drive not ready for command hde: INVALID GEOMETRY: 88 PHYSICAL HEADS? Unable to handle kernel NULL pointer dereference at virtual address *pde = CPU:0 EIP:0010:[0011abdb] EFLAGS: 00010002 EIP is at (2.4.21-0.pre3.1mdk) eax: c0291938 ebx: ecx: c159df34 edx: c159df2c esi: 0202 edi: c0291938 ebp: c159df24 esp: c159df1c ds: 0018 es: 0018 ss: 0018 Process swapper (pid: 1, stackpage=c159d000) Stack: c0291930 c159c000 c159df48 c0107cae 0001 c159c000 c0291938 c0325988 c0105000 c159df5c c0107e27 c0291930 c0291920 c159dfbc c016e78e c0325988 0001 c159df80 c01603d7 c0291920 Call Trace: [c0107cae] (0xc159df28)) [c0105000] (0xc159df44)) [c0107e27] (0xc159df4c)) [c016e78e] (0xc159df60)) [c01603d7] (0xc159df70)) [c01d4b03] (0xc159df84)) [c01d4cba] (0xc159df98)) [c0105042] (0xc159dfdc)) [c0105000] (0xc159dfe8)) [c0107546] (0xc159dff0)) [c0105030] (0xc159dff8)) Code: 89 0b 89 59 04 56 9d 5b 5e 5d 03 8d 76 00 8d bc 27 00 00 00 0Kernel panic: Attempted do kill init! --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] description: I just installed Mandrake 9.1 Beta 2 and after install I can't boot it. The only thing I get on screen is some debug info and some error message about /dev/hde. On keyboard Caps lock and Scroll Lock are flashing and the only thing I can do is turn off the computer. /dev/hde is a hard drive on HightPint HPT370 RAID controler that is integrated onto motherboard Abit KT7A-RAID. Mandrake 9.0 boots just fine on the same computer. The BIOS version is A9 and the BIOS version of HPT370 is 2.34.
