[Cooker] [Bug 5535] [usermode-consoleonly] Authorization problem with cerain password forms
http://qa.mandrakesoft.com/show_bug.cgi?id=5535 [EMAIL PROTECTED] changed: What|Removed |Added Status|ASSIGNED|NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-23-09 11:30 --- You don't have to registred to MandrakeClub to download any GPL packages ... so public cooker mirror ftp.club-internet.fr/pub/linux/Mandrake-devel/cooker/i586/Mandrake/RPMS/usermode-1.63-6mdk.i586.rpm Le mar 23/09/2003 à 07:43, [hornet] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: When starting up DrakConf or other Drak* programms as normal user - it pops up a authorisation dialog, wich fails to authorize with my root password, wich begins and ends with blank spaces. If I use normal password - authorization works as expected. Example of my root password having problems to authorize is " test " (without quotes) Thanks!
[Cooker] [Bug 5152] [kernel] Adaptec 29320 controller
http://qa.mandrakesoft.com/show_bug.cgi?id=5152 --- Additional Comments From [EMAIL PROTECTED] 2003-23-09 11:20 --- Problem is resolved in last cooker install. Please respond via bugzilla, you can reply directly to bugzilla mails. Le lun 22/09/2003 à 22:01, Ole Sloth a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: Raid controller not supported
[Cooker] [Bug 5618] [Installation] IDE RAID driver for promise fastrack 378 non-working
http://qa.mandrakesoft.com/show_bug.cgi?id=5618 --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 20:20 --- pcd-ultra really ? normaly pdc-utlra Counld you try noapic boot option ? What is the kernel error message during install ? Le lun 22/09/2003 à 19:53, [saturnine] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Hi, this problem was in 9.2rc1, and rc2. The driver for the fastrack 378 ide raid controller is not installing at all. I am getting the following error message: insmod'ing module pdc-ultra failed at usr/bin perl-install/modules.pm line 408. I have 2 120Gb WD 7200rpm drives in RAID 2 + 0
[Cooker] [Bug 5635] [kernel] scanner not detected
http://qa.mandrakesoft.com/show_bug.cgi?id=5635 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |ASSIGNED Ever Confirmed||1 --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 17:13 --- could you send me back lspcidrake command output after hot-plugged ? -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: HP5200C scanner isn't detected by scannerdrake.
[Cooker] [Bug 5597] [suspend-scripts] 9.2rc2 Software Suspend menu option crashes computer
http://qa.mandrakesoft.com/show_bug.cgi?id=5597 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||WONTFIX --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 17:10 --- Nividia drivers doesn't support very well apm suspend or software suspend ... some hardwre can cause some troubles. -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: This is on a Athlon XP 2600+, no overclocking. ASUS A7N8X Deluxe motherboard, 512mb ram. I'm using a GeforceFX 5600 with nvidia's newest drivers. When the option is selected, the screen becomes very garbled, basically just a mess of blue vertical lines. The system is a 9.2 update from a 9.1 basic install. 9.1 was installed fresh, then upgraded to 9.2, then updated to cooker. Then the nvidia drivers were installed for both the video card and the nforce2 chipset. I did not try a software suspend before this point.
[Cooker] [Bug 5549] [suspend-scripts] should require apmd
http://qa.mandrakesoft.com/show_bug.cgi?id=5549 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 17:06 --- Fixied in 1.6-4mdk Thanks a lot ;) -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: /usr/sbin/pmsuspend use /usr/bin/apm which is provided by apmd, so suspend-scripts should require apmd.
[Cooker] [Bug 5535] [usermode-consoleonly] Authorization problem with cerain password forms
http://qa.mandrakesoft.com/show_bug.cgi?id=5535 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |ASSIGNED Ever Confirmed||1 --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 17:00 --- Could you recheck with last version ? -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: ASSIGNED creation_date: description: When starting up DrakConf or other Drak* programms as normal user - it pops up a authorisation dialog, wich fails to authorize with my root password, wich begins and ends with blank spaces. If I use normal password - authorization works as expected. Example of my root password having problems to authorize is " test " (without quotes) Thanks!
[Cooker] [Bug 5509] [suspend-scripts] Suspend-to-disk progress bar needed from the start
http://qa.mandrakesoft.com/show_bug.cgi?id=5509 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 16:58 --- ok, may be in further version, note there are allready a progress bar on console mode -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: When suspend-to-disk is initiated there is a very long delay before the machine switches to console mode and starts giving feedback. There should be a progress bar informing that services are being shut down or a small window telling that the process may take a while. On resume, the X screensave needs to trigger so that the user becomes aware that the resume process i finished and the computer is ready to use. Nevertheless, I'm very happy to see swsusp working on my Dell Inspiron 8500. Thanks.
[Cooker] [Bug 5481] [usermode] Problem with userpasswd
http://qa.mandrakesoft.com/show_bug.cgi?id=5481 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 16:56 --- fixied in last version by gc -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: Step to reproduce = Launch userpasswd from a terminal. Problem === When you type a new password it doesn't change the password at all, It keeps the old one. -- Jérémie
[Cooker] [Bug 4804] [mkbootdisk] kernels in cooker too big
http://qa.mandrakesoft.com/show_bug.cgi?id=4804 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||WONTFIX --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 16:52 --- Evolution of kernel need ACPI code implemented ... (add somes ko) So look if you can slim initrd instead -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: This isnt a mkbootdisk bug specifically, but it also applies to the draktools for mking boot disks. It seems the kernels are too big for the floppy (1.44 meg floppies). How is it that we are supposed to make boot disks in Cooker? I mean, you need 1.2 megs for the kernel image (even b2zipped), the bootloader, and the initrd. That's not enough space in 1.44 megs. I tried it this past weekend while talking to another person; the floppy just ran out of space.
[Cooker] [Bug 4693] [usermode-consoleonly] Bogus password prompt if "Connect" selected
http://qa.mandrakesoft.com/show_bug.cgi?id=4693 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 16:39 --- fixied normaly -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: If you invoke drakconnect under MCC in a situation where your network is properly configured but doesn't work for some reason (you can simulate this by activating shorewall with its default options which block everything), let it chew on "Testing your connection" until it decides that you aren't connected, and then click on the "Connect" button in the dialog, you get a popup dialog about an invalid password. I have no idea what that's about...
[Cooker] [Bug 3950] [usermode-consoleonly] drakconf from non-root ID loops
http://qa.mandrakesoft.com/show_bug.cgi?id=3950 [EMAIL PROTECTED] changed: What|Removed |Added Status|REOPENED|RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 16:37 --- fixied -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: In the May 18 Cooker, running MCC from the launcher (/usr/sbin/drakconf) from a non-root ID gives the password prompt, and then appears to enter a solid loop. According to "top", it is the drakconf.real process which is looping. If you run "drakconf" from a root session command line, it works fine.
[Cooker] [Bug 3577] [adiusbadsl] kernel crash using adiusbadsl drivers
http://qa.mandrakesoft.com/show_bug.cgi?id=3577 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEEDINFO|RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 16:32 --- normaly done -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: When using adiusbadsl drivers to access Internet, nothing seems to be wrong but when I try to copy a data from a cdrom to the hard drive, or do a md5sum of a cdrom, the system crash. The solution is to compile/install the driver avaible here http://fast800.tuxfamily.org/pub/IMG/gz/eagle-1.0.2-cc5.tar.gz strange thing: the version included in mandrake9.1 does not include the "eth0" interface contrary the eagle version. infos: PHILIPS CDRW48 ?NV11 geForce2 100/200(using GPL drivers :) ?Silicon Integrated Systems [SiS] 7001 USB SiS 5513 [IDE] STORAGE_IDE kernel-2.4.21.0.13mdk-1-1mdk adiusbadsl-1.0.2-0.cc5.2mdk
[Cooker] [Bug 679] [kdebase] Change Password problem
http://qa.mandrakesoft.com/show_bug.cgi?id=679 [EMAIL PROTECTED] changed: What|Removed |Added Status|ASSIGNED|RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-29-08 18:26 --- No activity has been seen on this bug since 20030205 and it is in ASSIGNED state. This probably means that the information provided was not clear enough, or that some attention is needed. Please test and confirm that this bug is still valid with the latest cooker version. --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 16:26 --- fixied in last usermode -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: In this application, at starting, a window appears asking to the user to type current password, if the typed password isn't correct, a window error appears : "Error : Unknow error". The only choice is "close" button and the program ends. The principal window is resizable.
[Cooker] [Bug 4945] [kernel] [RC1] i810 module will not load
http://qa.mandrakesoft.com/show_bug.cgi?id=4945 --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 15:47 --- After booting with acpi=on, machine freeze when you try lspcidrake or cat /proc/pci ? Could you test that ? -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Ok, this is kinda related to bug 4944. When I boot with acpi=off, I get an error saying that insmod i810_audio does not work; when i boot with acpi=on, i810_audio loads fine but then i get bug 4944.
[Cooker] [Bug 5152] [kernel] Adaptec 29320 controller
http://qa.mandrakesoft.com/show_bug.cgi?id=5152 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 15:50 --- boot on install go to console (press ) and send me back lspci you can try to load manualy aic79xx : # modprobe aic79xx go back to graphical installer (ALT-F7) Le dim 21/09/2003 à 21:05, [tvignaud] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: Raid controller not supported
[Cooker] [Bug 5401] [ldetect-lst] [9.2 RC 1] insmod'ing module ehci-hcd failed at...
http://qa.mandrakesoft.com/show_bug.cgi?id=5401 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEEDINFO|UNCONFIRMED --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 15:40 --- please retry on last kernel Le dim 21/09/2003 à 21:03, [tvignaud] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: insmod'ing module ehci-hcd failed at /usr/bin/perl-install/modules.pm line 408 Continuing with 'ok'. No problems with installation. Hardware (G732 notebook, see at greenhat.blogspot.com) has four USB 2.0 ports. The system uses usb-ohci module instead, and everything works OK (presumably reverting to USB 1.1).
[Cooker] [Bug 5760] [drakxtools] Failure to set up Network Properly 9.2-RC2
http://qa.mandrakesoft.com/show_bug.cgi?id=5760 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 15:30 --- Please install lm_sensors package and send me back output of dmidecode command noapic : No Advanced Programmable Interrupt Controller, don't use pci routing table with apic enable Le sam 20/09/2003 à 05:50, [gwg] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: I have two networkcards. On 9.1 they configure properly with the wizard. One usesthe tulip module and the other uses the netsumi module.Both are detected but neither works. My system insists on searching for 127.000.000.001 as a DHCP. I'm sure this can be straigtened out with the command line, but then I don't need drak. This a clean Install /dev/hda7
[Cooker] [Bug 5742] [kernel] Scanner not Scanning
http://qa.mandrakesoft.com/show_bug.cgi?id=5742 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 15:20 --- It seems that you need to update firmware of your scsi card. Could you try it ? Le sam 20/09/2003 à 02:00, [till] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: UMax S-12 Scanner works on preview but freezes on scan. This scanner worked in 9.1 Hw List Is as Follows: MB K7S5A SCSI CARD: Adaptec AIC-7850 PCI Scanner UMAX S-12
[Cooker] [Bug 4868] [kernel] Can't install on my PC (Via KT600)
http://qa.mandrakesoft.com/show_bug.cgi?id=4868 --- Additional Comments From [EMAIL PROTECTED] 2003-22-09 00:00 --- try noapic boot option Le dim 21/09/2003 à 21:44, [kian] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: I can't install Mandrake 9.2! When the installation program scans the ide! My mouse locks up and can't move and it takes 10 min to get one step futher! It's like the installation program doesn't have enough resources and runs very very slow! But it is also very hard to install Mandrake without mouse! The Mainboard is Gigabyte 7VT600 (Bios Version F6)
[Cooker] [Bug 5832] [suspend-scripts] renaming /usr/sbin/pmsuspend breaks apm suspend
http://qa.mandrakesoft.com/show_bug.cgi?id=5832 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-19-09 19:30 --- Fixied in 6mdk thanks a lot ! ;) Le ven 19/09/2003 à 19:08, [mr] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: apmd calls /usr/sbin/pmsuspend to prepare the system for suspend - which doesn't exist any more now.
[Cooker] [Bug 5760] [drakxtools] Failure to set up Network Properly 9.2-RC2
http://qa.mandrakesoft.com/show_bug.cgi?id=5760 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-19-09 15:40 --- please try noapic boot option Le ven 19/09/2003 à 12:57, [dchaumette] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: I have two networkcards. On 9.1 they configure properly with the wizard. One usesthe tulip module and the other uses the netsumi module.Both are detected but neither works. My system insists on searching for 127.000.000.001 as a DHCP. I'm sure this can be straigtened out with the command line, but then I don't need drak. This a clean Install /dev/hda7
[Cooker] [Bug 5644] [Hardware] Magneto Optical MO drive not configured by Mandrake
http://qa.mandrakesoft.com/show_bug.cgi?id=5644 --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 19:30 --- fine, ide-tape module doesn't work ? Le jeu 18/09/2003 à 19:19, [tom_kelly33] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: An internal ATAPI/IDE MO drive from Fujitsu is not recognized or setup by installation (9.2rc2). dmesg outputs "hdd: FUJITSU MCF3064AP, ATAPI OPTICAL drive" but there seems to be no way to access the drive. I was expecting an icon similar to the CD/ROM to be created on the desktop. Email me at [EMAIL PROTECTED] if you desire further details. Thank you.
[Cooker] [Bug 4138] [drakxtools] 1394 disk requires rmmod;modprobe AND distinguishing between /dev/sda and /dev/sdb
http://qa.mandrakesoft.com/show_bug.cgi?id=4138 --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 19:20 --- your script are not very good to integreated in mdk distrib but you can test this workaround to add this line on /etc/modules.conf pre-install usb-storage /bin/sleep 2 Le jeu 18/09/2003 à 18:58, [mandrake] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: External 1394 disks have 2 problems: 1)After the system has booted, one must rmmod all the 1394 modules and then re-modprobe them to get the disk detected. This may be a problem to do with PCMCIA 1394 cards. 2)If there are 2 external removable disks (in my case a 120GB Hard Disk over 1394, and a 1 GB microdrive over a USB Compact Flash reader), then depending on the order in which these are plugged in, either could be /dev/sda or /dev/sdb. This is not predicatable, so, one must distinguish between them before mounting! The URL includes my script (1394mount) to fix the problem. It may not be ideal, but it does work OK for me :-)
[Cooker] [Bug 3470] [Installation] 9.1rc2: LeadTek WinFast 7350KDA motherboard, noapic required
http://qa.mandrakesoft.com/show_bug.cgi?id=3470 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 19:00 --- please install lm_sensors package and send me back output of dmidecode command Le jeu 18/09/2003 à 18:41, [tvignaud] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: USB mouse and PCI network card do not function during install, most likely becaues "noapic" is not passed to the kernel. Also, after installation, "noapic" must be manually added to /etc/lilo.conf for most anything to work...
[Cooker] [Bug 5779] [acpi] ACPI and presario 2100 Mandrake 9.2 RC2
http://qa.mandrakesoft.com/show_bug.cgi?id=5779 --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 19:10 --- So look if you can update your bios revision and boot with acpi=on, else I need to update acpi code. Le jeu 18/09/2003 à 18:52, [patrice.ferlet] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: I am trying Mandrake 9.2 RC2, using the new kernel from contribs. I cannot use acpi, acpid: can't open /proc/acpi/event: No such file or directory So i have set acpi=on on lilo.conf but that freeze the boot sequence. Thanks to all
[Cooker] [Bug 3455] [Installation] installation doesn't work on NEC POWERMATE
http://qa.mandrakesoft.com/show_bug.cgi?id=3455 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 19:00 --- Could you try 'noapic' or 'lapic' or both options ? Le jeu 18/09/2003 à 18:42, [tvignaud] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: The only way to launch the installation on my NEC Powermate, with AMD Athlon, 128Mo, is to use alt1 (kernel 2.2.X ). But the installer doesn't install a kernel 2.2 but only a 2.4.x kernel, so i can't boot on it ! I don't understand why it doesn't work with kernel 2.4, it crash on the word "booting on kernel..." I've tried somethin like linux mem=112M, but it doesn't work anymore... I've Mandrake 9.1 RC2
[Cooker] [Bug 4605] [Installation] Installation - USB timeouts
http://qa.mandrakesoft.com/show_bug.cgi?id=4605 --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 18:50 --- Which kernel version ? If your current kernel is between 2.4.22.2mdk and 2.4.22.6mdk inclusive add lapic option at boot. Try lastest on cooker please. Le jeu 18/09/2003 à 18:14, [tvignaud] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: During the expert install process the keyboard and mouse will stop functioning. I have a AMD Athlon XP System, with a VIA KT266A chipset which supports USB 1.0/1.1 I am using a USB Keyboard (Logitech Internet Navigator) and a USB Mouse (Microsoft Intellimouse Optical USB). I have chosen an expert install, English (British), USB mouse and UK Keyboard. The crash can and has happened at any point in the install. Looking at the logs after shutting down the X-server : usb-uhci.c: interrupt, status 2, frame #1694 <4>usb_control/bulk_msg: timeout (of which there are several) I can usually continue installation by unplugging my USB keyboard and plugging it into the PS/2 port using an adapter - which I guess proves that USB dies. My mouse will not work however as I can't find the adapter ;) The timeout however above might be resulting in me unplugging the keyboard and sticking in the PS/2, of which I am not sure. The USB keyboard works fine with the text install oddly enough. However, the mouse is not used in this case. Perhaps it is bug in the kernel or the graphical installation, I am not sure. If I make it to the end of the install, and reboot, the USB keyboard/mouse work fine in the running linux system. I have noticed that USB devices also fail often when I goto the Mandrake Control Centre and do any kind of device detection. This has been a problem since Mandrake Linux 9.0/9.1 as well.
[Cooker] [Bug 4138] [drakxtools] 1394 disk requires rmmod;modprobe AND distinguishing between /dev/sda and /dev/sdb
http://qa.mandrakesoft.com/show_bug.cgi?id=4138 --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 18:50 --- 1) remove sbp2 from /etc/modules.conf 2) resend your patch please Le jeu 18/09/2003 à 18:23, [tvignaud] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: External 1394 disks have 2 problems: 1)After the system has booted, one must rmmod all the 1394 modules and then re-modprobe them to get the disk detected. This may be a problem to do with PCMCIA 1394 cards. 2)If there are 2 external removable disks (in my case a 120GB Hard Disk over 1394, and a 1 GB microdrive over a USB Compact Flash reader), then depending on the order in which these are plugged in, either could be /dev/sda or /dev/sdb. This is not predicatable, so, one must distinguish between them before mounting! The URL includes my script (1394mount) to fix the problem. It may not be ideal, but it does work OK for me :-)
[Cooker] [Bug 3612] [Installation] can't install from a firewire CD-ROM
http://qa.mandrakesoft.com/show_bug.cgi?id=3612 --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 18:50 --- "missing sb2" is really the message printed ? or sbp2 ? Le jeu 18/09/2003 à 18:38, [tvignaud] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Sony VAIO VX88, installer cannot load stage two from the firewire (iLink) DVD-R/CD-RW. Last error is that it's missing sb2. Drive works fine after a successful network install. Problem existed in 9.0 as well. Expert mode cannot be used to bypass the problem. It wouldn't be so annoying if disk two had network.img as the El Torito boot image HINT HINT HINT. thanks, Jack
[Cooker] [Bug 5644] [Hardware] Magneto Optical MO drive not configured by Mandrake
http://qa.mandrakesoft.com/show_bug.cgi?id=5644 --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 18:40 --- Just add ide-tape in /etc/modules for futher reboot To try it now type modprobe ide-tape as root Le jeu 18/09/2003 à 17:58, [tvignaud] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: An internal ATAPI/IDE MO drive from Fujitsu is not recognized or setup by installation (9.2rc2). dmesg outputs "hdd: FUJITSU MCF3064AP, ATAPI OPTICAL drive" but there seems to be no way to access the drive. I was expecting an icon similar to the CD/ROM to be created on the desktop. Email me at [EMAIL PROTECTED] if you desire further details. Thank you.
[Cooker] [Bug 5618] [Installation] IDE RAID driver for promise fastrack 378 non-working
http://qa.mandrakesoft.com/show_bug.cgi?id=5618 --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 18:40 --- This driver seems doesn't support all fastrack, please send me back lspcidrake -v output Le jeu 18/09/2003 à 17:59, [tvignaud] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Hi, this problem was in 9.2rc1, and rc2. The driver for the fastrack 378 ide raid controller is not installing at all. I am getting the following error message: insmod'ing module pdc-ultra failed at usr/bin perl-install/modules.pm line 408. I have 2 120Gb WD 7200rpm drives in RAID 2 + 0
[Cooker] [Bug 5051] [Installation] Installation freezes after displaying "ESR value before enabling vector : 00000002"
http://qa.mandrakesoft.com/show_bug.cgi?id=5051 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 18:40 --- Note typo : noAPIC is not the same as noapic for the kernel, so retry please. If doesn't work try pci=noacpi Try all these option with lastest for exemple kernel 2.4.22.10mdk Le jeu 18/09/2003 à 18:08, [tvignaud] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: This also appears with 9.1 and 9.1b1 (befoire ?). I read forums about this problem, trying to start the installation with "text noAPIC" but with no result. It seems that many computer with AMD processor have the same problem, also with RedHat distribution (kernel bug ?) Gushterul from security.org proposed to comment the line : apic.c : apic_write(APIC_ESR, 0); but I'm not strong enough to do this myself. My config is : - CPU Type: AMD Duron XP, 1300 MHz (6.5 x 200) Motherboard Name: Mercury KOB KM266 FDSMx Motherboard Chipset : VIA VT8375 ProSavageDDR KM266 System Memory : 480 MB (DDR SDRAM) BIOS Type : AMI (07/02/02) Video Adapter : S3 Graphics ProSavageDDR (32 MB) 3D Accelerator : S3 SuperSavageDDR Audio Adapter : VIA AC'97 Enhanced Audio Controller Network Adapter : 3Com EtherLink PCI Hope this will help you. If you want me to do other tests, there will be welcome.
[Cooker] [Bug 2101] [Installation] RC1 install did not detect SMP
http://qa.mandrakesoft.com/show_bug.cgi?id=2101 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 17:50 --- Fixed in 9.1 and 9.2 dmi tables detection added ;) Le jeu 18/09/2003 à 17:32, [qa] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: During 9.1 RC1 install non SMP kernel was selected on dual Celeron system. After adding the smp kernel package by hand and changing lilo config SMP works as expected.
[Cooker] [Bug 5779] [acpi] ACPI and presario 2100 Mandrake 9.2 RC2
http://qa.mandrakesoft.com/show_bug.cgi?id=5779 --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 17:50 --- Your machine can't boot on ACPI so if you have apm support you can saw battery level. /proc/apm Le jeu 18/09/2003 à 17:38, [patrice.ferlet] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: I am trying Mandrake 9.2 RC2, using the new kernel from contribs. I cannot use acpi, acpid: can't open /proc/acpi/event: No such file or directory So i have set acpi=on on lilo.conf but that freeze the boot sequence. Thanks to all
[Cooker] [Bug 1205] [Installation] Warning: insmod'ing module hptraid failed
http://qa.mandrakesoft.com/show_bug.cgi?id=1205 --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 17:40 --- hptraid doesn't support all high point _software_ raid cards. Note: hptraid still dangerous on some hardware and is as alpha state. Le jeu 18/09/2003 à 17:28, [qa] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: Beta 3: During installation I got a dialog box saying: insmod'ing module hptraid failed at /usr/bin/perl-install/modules.pm line 390. I switched to console F3 and there it was: runing /usr/bin/insmod_2> /dev/tty5 /tmp/hptraid.o In console F5 it said: /tmp/hptraid.o: init_module: No such device There were also the same warnings about modules imm and pmm in console but not in GUI. I don't know what imm and ppa are but I do have HPT 372 RAID controller on my motherboard (Abit KT7A-RAID) so I think that there should be device which hptraid module is supposed to load for.
[Cooker] [Bug 5641] [kernel] Adds extra instance each time
http://qa.mandrakesoft.com/show_bug.cgi?id=5641 [EMAIL PROTECTED] changed: What|Removed |Added Status|ASSIGNED|NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 17:20 --- ID removed in 2.4.22.10mdk (final 9.2 kernel) Le jeu 18/09/2003 à 17:02, [till] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: I just added a HP PSC 1210 muti-funtion printer to my system. Every time I run printerdrake, it adds another instance of that model to the list of printers. So if I run it three times, I get a list of three HP PSC 1210's connected to my system.
[Cooker] [Bug 5779] [acpi] ACPI and presario 2100 Mandrake 9.2 RC2
http://qa.mandrakesoft.com/show_bug.cgi?id=5779 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 11:50 --- ACPI support in our kernel depend of bios version, some bios is not compilant with ACPI specification, so to solve your problem if your machine don't boot with ACPI, simply remove acpi acpid packages Le jeu 18/09/2003 à 03:14, [patrice.ferlet] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: I am trying Mandrake 9.2 RC2, using the new kernel from contribs. I cannot use acpi, acpid: can't open /proc/acpi/event: No such file or directory So i have set acpi=on on lilo.conf but that freeze the boot sequence. Thanks to all
[Cooker] [Bug 5771] [kernel] Promise FasttTrack sx4000 raid controller (pdc20621) is not supported
http://qa.mandrakesoft.com/show_bug.cgi?id=5771 --- Additional Comments From [EMAIL PROTECTED] 2003-18-09 11:40 --- add -DMODVERSIONS -include /usr/src/linux/include/linux/modversions.h in Makefile to use it with your current kernel. Also you need too install kernel-source with same version that currently running. Le mer 17/09/2003 à 21:30, [tvignaud] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I have a new PC with the Promise FastTrack sx4000 configured as RAID 5. The chip set is PDC20621. I have tried to install Mandrake 9.2 rc2 and this storage media in not dectected in the set up. I tried some drivers compiled here :http://majestic.lugh.de/~fs/promise/ put the FastTrack.o file on a ext2 formated floppy and tried again. The driver failed to load. "ismod failed" or something like that, looked on other screen and it said something about symbols mismatching. I suppose i could install 9.2 rc2 to anothe machine, and compile the drivers and try that, but i think that i would have to do this EVERYTIME i upgrade. Can some one use the source at http://majestic.lugh.de/~fs/promise/ to help make it so that Mandrake supports this card? Please help.
[Cooker] [Bug 5641] [drakxtools] Adds extra instance each time
http://qa.mandrakesoft.com/show_bug.cgi?id=5641 --- Additional Comments From [EMAIL PROTECTED] 2003-17-09 15:54 --- Do like till but add reset=1 on when you modprobe lp module, so : # modprobe scanner # modprobe lp reset=1 -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: I just added a HP PSC 1210 muti-funtion printer to my system. Every time I run printerdrake, it adds another instance of that model to the list of printers. So if I run it three times, I get a list of three HP PSC 1210's connected to my system.
[Cooker] [Bug 5678] [kernel] acpi=ht boot command causes gpf at power down
http://qa.mandrakesoft.com/show_bug.cgi?id=5678 [EMAIL PROTECTED] changed: What|Removed |Added Status|ASSIGNED|NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-15-09 15:30 --- Strange, send me your boot cmdline that works, cat /proc/cmdline > /tmp/cmdline Le lun 15/09/2003 à 13:00, [tvignaud] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: For 9.2rc2, the installer puts acpi=ht on the boot command line for the Grub bootloader. This is a desktop, IWill XP333-R motherboard, latest BIOS, ALi Magik 1 (ALi M1647 Northbridge, ALi M1535D+ Southbridge) chipset, socket A, Athlon XP processor. Booting with the acpi=ht parameter will cause a general protection fault:fdf8, Bad EIP value at power down. Removing this command allows the computer to shut down cleanly. The behavior is the same with kernel-2.4.22.9mdk and updated cooker.
[Cooker] [Bug 4944] [kernel] [RC1] kernel crashes system when acpi=on
http://qa.mandrakesoft.com/show_bug.cgi?id=4944 --- Additional Comments From [EMAIL PROTECTED] 2003-11-09 18:30 --- Your computer must boot with lapic not nolapic option for 7mdk lapic (reenable local apic) -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: UNCONFIRMED creation_date: description: When I boot a system with acpi=on, the system hangs during the boot sequence on "checking for new hardware". The computer is a Toshiba Satellite 5200-711. If I skip Harddrake during the boot sequence, the system hangs after i log in.
[Cooker] [Bug 5194] [kernel] Mustek GSmartMini2 USB digicamera not recognized
http://qa.mandrakesoft.com/show_bug.cgi?id=5194 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 23:10 --- could you try to boot with pci=noacpi boot option ? Le mer 10/09/2003 à 22:56, [weiss] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I can not load the digicamera Mustek GSmartMini2. Error messages with GTKam: "Bad parameters: Could not list folders in /" "Bad parameters: Could not initialize camera" With MDK9.1 and kernel 2.4.21-x I have no problems.
[Cooker] [Bug 5194] [kernel] Mustek GSmartMini2 USB digicamera not recognized
http://qa.mandrakesoft.com/show_bug.cgi?id=5194 --- Additional Comments From [EMAIL PROTECTED] 2003-10-09 22:30 --- Do you have some problem with other usb device on your machine ? Please, send me back your dmesg. Le mer 10/09/2003 à 22:06, [till] a écrit : [EMAIL PROTECTED] -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I can not load the digicamera Mustek GSmartMini2. Error messages with GTKam: "Bad parameters: Could not list folders in /" "Bad parameters: Could not initialize camera" With MDK9.1 and kernel 2.4.21-x I have no problems.
[Cooker] [Bug 4975] [suspend-scripts] [RC1] Mouse and suspend
http://qa.mandrakesoft.com/show_bug.cgi?id=4975 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-03-09 16:50 --- Could you try to change the line USB_RESTART="no" to "yes" in /etc/sysconfig/suspend, nomaly this will be done for you. Le ven 29/08/2003 à 21:38, [emmanuel.moll] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: Hi, I can put my computer into software suspend fine and i can come out fine, but when i come out of hibernate, the mouse is stuck and does not move. KDE is not crashed cause working through the keybord works fine. BTW, what is K->Suspend Computer linked to i.e. which command does it run?? Emmanuel
[Cooker] [Bug 4070] [acpi] ACPI doesn't load on startup
http://qa.mandrakesoft.com/show_bug.cgi?id=4070 [EMAIL PROTECTED] changed: What|Removed |Added Status|ASSIGNED|NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-02-09 17:30 --- Do you have acpi=on or no acpi option in kernel parametters ? After that could you have a /proc/acpi directory on your system. If not your system is not supported (blacklisted) or acpi is disable in bios ? send me back full dmesg please. Le ven 29/08/2003 à 18:29, [qa] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: I have really struggled with getting the fan working on my Toshiba (2805-S201) laptop: tried everything (APM, tosh-utils, etc.). Now am on ACPI. I installed the ACPI packages and tried to load. But I get an error on system startup: "can't open /proc/acpi/event" ... it says that there is no such file, or something to that effect. Any help would be greatly appreciated, since CPU cooling is the last major obstacle to my getting a healthy Linux install on my laptop. -Jorge
[Cooker] [Bug 3465] [ethemes] Do NOT package .xvpics directory
http://qa.mandrakesoft.com/show_bug.cgi?id=3465 --- Additional Comments From [EMAIL PROTECTED] 2003-02-09 16:30 --- Hi, phpgroupware fixed in 0.9.14.006-2mdk Thanks for your support, Le mar 02/09/2003 à 08:43, andre a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: some temporary files were packaged by error. search the .xvpics directory in Aliens and minEguE theme
[Cooker] [Bug 4193] [faces] Bad perms on /usr/bin/faces
http://qa.mandrakesoft.com/show_bug.cgi?id=4193 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-01-09 16:20 --- fixed in 1.6.1-19mdk Le ven 29/08/2003 à 18:29, [qa] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: /usr/bin/faces does not have the read bit for all set.
[Cooker] [Bug 3577] [adiusbadsl] kernel crash using adiusbadsl drivers
http://qa.mandrakesoft.com/show_bug.cgi?id=3577 --- Additional Comments From [EMAIL PROTECTED] 2003-01-09 15:50 --- please try with kernel 2.4.22.2mdk or newest. Le ven 29/08/2003 à 18:28, [qa] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: When using adiusbadsl drivers to access Internet, nothing seems to be wrong but when I try to copy a data from a cdrom to the hard drive, or do a md5sum of a cdrom, the system crash. The solution is to compile/install the driver avaible here http://fast800.tuxfamily.org/pub/IMG/gz/eagle-1.0.2-cc5.tar.gz strange thing: the version included in mandrake9.1 does not include the "eth0" interface contrary the eagle version. infos: PHILIPS CDRW48 ?NV11 geForce2 100/200(using GPL drivers :) ?Silicon Integrated Systems [SiS] 7001 USB SiS 5513 [IDE] STORAGE_IDE kernel-2.4.21.0.13mdk-1-1mdk adiusbadsl-1.0.2-0.cc5.2mdk
[Cooker] [Bug 1920] [adiusbadsl] UBS2-SIS & kernel
http://qa.mandrakesoft.com/show_bug.cgi?id=1920 --- Additional Comments From [EMAIL PROTECTED] 2003-01-09 15:50 --- Normaly still not valid for 9.2RC1, please test it Le ven 29/08/2003 à 18:25, [qa] a écrit : -- Configure bugmail: http://qa.mandrakesoft.com/userprefs.cgi?tab=email --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: I have to install my modem but it is not detected. Normally it should see the modem in lspcidrake, therefore I have a problem directly on the level of the usb, a problem kernel CM : ABIT SR7-8X (ubs2, chips SIS) [EMAIL PROTECTED] root]# lspcidrake unknown : unknown (1039/0648//) unknown : Silicon Integrated Systems [SiS]|5591/5592 AGP unknown : Silicon Integrated Systems [SiS]|85C503/5513 unknown : Silicon Integrated Systems [SiS]|5513 [IDE] usb-ohci : Silicon Integrated Systems [SiS]|7001 USB usb-ohci : Silicon Integrated Systems [SiS]|7001 USB usb-ohci : Silicon Integrated Systems [SiS]|7001 USB unknown : unknown (1039/7002//) 8139too : Realtek|RTL-8139 unknown : CMD Technology Inc.|PCI-680 UltraATA/133 EIDE Controller snd-emu10k1 : Creative Labs|SB Live! (audio) unknown : unknown (10de/0281//) unknown : Virtual|Hub [] unknown : Virtual|Hub []
[Cooker] [Bug 3577] [adiusbadsl] kernel crash using adiusbadsl drivers
http://qa.mandrakesoft.com/show_bug.cgi?id=3577 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-04-01 19:10 --- eagle 1.0.3 must be included in next kernel version --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: When using adiusbadsl drivers to access Internet, nothing seems to be wrong but when I try to copy a data from a cdrom to the hard drive, or do a md5sum of a cdrom, the system crash. The solution is to compile/install the driver avaible here http://fast800.tuxfamily.org/pub/IMG/gz/eagle-1.0.2-cc5.tar.gz strange thing: the version included in mandrake9.1 does not include the "eth0" interface contrary the eagle version. infos: PHILIPS CDRW48 ?NV11 geForce2 100/200(using GPL drivers :) ?Silicon Integrated Systems [SiS] 7001 USB SiS 5513 [IDE] STORAGE_IDE kernel-2.4.21.0.13mdk-1-1mdk adiusbadsl-1.0.2-0.cc5.2mdk
[Cooker] [Bug 3242] [procps] top loop run when closing console
http://qa.mandrakesoft.com/show_bug.cgi?id=3242 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-03-13 11:00 --- I can't reporduce this pb, could you send me - version of this package (rpm -qi procps) - rpm -qa --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: Open konsole and type (as root for me) "top", then without stopping top, close the konsole window. Now "gkrellmm" or everthing which can show you the CPU load shows that 99% of cpu load is used by top... Killall top is a solution but this bug is very important !
[Cooker] [Bug 2324] [kernel] 1024 MB kernel oops/panic -> Mandrake 9.1 RC1
http://qa.mandrakesoft.com/show_bug.cgi?id=2324 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-03-12 19:49 --- Text install don't set the vga=788 at install boot time, so vga is not set in lilo.conf, and your system reboot. Note that your problem is very specific 1Go of mem and strange bios that not correctly report memsize so framebuffer is corrupt Your can verify/edit your lilo.conf at install time (there are a shell ) --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: Hi, When installing Mandrake 9.1 RC1 on a computer with 1024MB (1 gig) of memory after the initial "install screen" the computer just dies and the caps lock and scroll lock start blinking. This is a showstopper for the installation! Tried on 2 setups: P4 2.5 with ati 9700 Asus p4pe and AMD 2000+ with nvidia ti4600 Asus a7v8x. Both motherboards (after previous failure) flashed with the newest (beta) Bios -> Same problem. Same setup with 512 MB works just fine. CU PacMan
[Cooker] [Bug 1920] [adiusbadsl] UBS2-SIS & kernel
http://qa.mandrakesoft.com/show_bug.cgi?id=1920 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-03-12 19:10 --- send the output of : - lsmod - cat /proc/bus/usb/devices Try to boot with option noapic --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: I have to install my modem but it is not detected. Normally it should see the modem in lspcidrake, therefore I have a problem directly on the level of the usb, a problem kernel CM : ABIT SR7-8X (ubs2, chips SIS) [EMAIL PROTECTED] root]# lspcidrake unknown : unknown (1039/0648//) unknown : Silicon Integrated Systems [SiS]|5591/5592 AGP unknown : Silicon Integrated Systems [SiS]|85C503/5513 unknown : Silicon Integrated Systems [SiS]|5513 [IDE] usb-ohci : Silicon Integrated Systems [SiS]|7001 USB usb-ohci : Silicon Integrated Systems [SiS]|7001 USB usb-ohci : Silicon Integrated Systems [SiS]|7001 USB unknown : unknown (1039/7002//) 8139too : Realtek|RTL-8139 unknown : CMD Technology Inc.|PCI-680 UltraATA/133 EIDE Controller snd-emu10k1 : Creative Labs|SB Live! (audio) unknown : unknown (10de/0281//) unknown : Virtual|Hub [] unknown : Virtual|Hub []
[Cooker] [Bug 1605] [procps] procps produces very long lines
http://qa.mandrakesoft.com/show_bug.cgi?id=1605 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-03-12 19:06 --- It's normal output, ps ax (don't print environement variables) Note: - is depricated --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: % ps -eax Produces a few extremely long lines (showing the complete command line and environment strings). Not all lines are very long. Mostly KDE processes. Try: % ps -eax | grep kdeinit
[Cooker] [Bug 2626] [usermode] DrakConf won't start as a non root user
http://qa.mandrakesoft.com/show_bug.cgi?id=2626 --- Additional Comments From [EMAIL PROTECTED] 2003-03-12 16:00 --- Fixed in usermode-1.63-5mdk --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: When I start DrakConf as a non root user, it says "Erreur inconnue" ("Unknown error") and stops. (I can start it as root) It happens when I use gdm to login. When I use autologin or kdm, it works fine. Anyway, thanks for this tool :)
[Cooker] [Bug 2791] [usermode] Unable to start userdrake
http://qa.mandrakesoft.com/show_bug.cgi?id=2791 [EMAIL PROTECTED] changed: What|Removed |Added Status|NEW |RESOLVED Resolution||FIXED --- Additional Comments From [EMAIL PROTECTED] 2003-03-12 16:03 --- Fixed in usermode-1.63-5mdk --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: I can't start userdrake neither from Mandrake Control Center, nor from command line. When I try to launch it, a message box "Unknown error" appears. How can I find more details to help you resolve this bug ?
[Cooker] [Bug 2226] [kernel] Logitech Mx500 USB mouse not detected
http://qa.mandrakesoft.com/show_bug.cgi?id=2226 [EMAIL PROTECTED] changed: What|Removed |Added Status|UNCONFIRMED |NEEDINFO --- Additional Comments From [EMAIL PROTECTED] 2003-03-11 20:20 --- Fixed in final --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEEDINFO creation_date: description: I have just installed Mandrake 9.1 rc1, and my Logitech Mx500 is not detected. When I use the PS2 adaptator, the mouse is well recognize, but with the USB plug, the mouse doesn't work neither in the installation program, nor in Xfree.
[Cooker] [Bug 2851] [kernel] lircd does not create /dev/lirc/0
http://qa.mandrakesoft.com/show_bug.cgi?id=2851 --- Additional Comments From [EMAIL PROTECTED] 2003-03-07 15:01 --- please send me the result of - ls -l /dev/lirc - lsmod --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: With the latest cooker update from 6th of March, lircd does not create /dev/lirc/0. I am taking a stab in the dark and assuming that because I run a system with devfs that the module is not creating the devfs entry. Changing /etc/sysconfig/lircd from: (this results in lircmd and crew not being able to communicate with the kernel space portion of this and hence all the problems that arrise from that) # The device node that communicates with the IR device. # with devfs enabled DEVICE=/dev/lirc/0 # without devfs #DEVICE=/dev/lirc To: # The device node that communicates with the IR device. # with devfs enabled #DEVICE=/dev/lirc/0 # without devfs DEVICE=/dev/lirc Fixes the problem and all other remaining mdk packages work as expected (tested with irw and xawtv). I've banged my head about this one for a month or so now since getting my new PV951 tuner card and just decided to have another dig at it. Hopefully this will get fixed for the final release.
[Cooker] [Bug 2324] [kernel] 1024 MB kernel oops/panic -> Mandrake 9.1 RC1
http://qa.mandrakesoft.com/show_bug.cgi?id=2324 --- Additional Comments From [EMAIL PROTECTED] 2003-03-07 13:50 --- Strange things, so just boot on CD with option mem=512M at boot time, install distro and install manualy enterprise kernel (don't forget to edit /etc/lilo.conf and remove mem=512M on append enterprise line). --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Hi, When installing Mandrake 9.1 RC1 on a computer with 1024MB (1 gig) of memory after the initial "install screen" the computer just dies and the caps lock and scroll lock start blinking. This is a showstopper for the installation! Tried on 2 setups: P4 2.5 with ati 9700 Asus p4pe and AMD 2000+ with nvidia ti4600 Asus a7v8x. Both motherboards (after previous failure) flashed with the newest (beta) Bios -> Same problem. Same setup with 512 MB works just fine. CU PacMan
[Cooker] [Bug 2022] [procps-devel] procps-devel-3.1.6-1mdk.i586.rpm is missing
http://qa.mandrakesoft.com/show_bug.cgi?id=2022 --- Additional Comments From [EMAIL PROTECTED] 2003-03-06 14:30 --- fixed in cooker and supposed to be in rc2 --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: The package procps is at version 3.1.6-1mdk, but the devel package on all mirrors and the 9.1rc1 CDs is 3.1.5-3mdk.
[Cooker] [Bug 2324] [kernel] 1024 MB kernel oops/panic -> Mandrake 9.1 RC1
http://qa.mandrakesoft.com/show_bug.cgi?id=2324 --- Additional Comments From [EMAIL PROTECTED] 2003-03-06 11:30 --- Please update with the lastest kernel 2.4.21-0.12mdk and retry. With 1Go of RAM on your system, you must use kernel-enterprise. Note: Please try release Bios instead of Beta bios --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Hi, When installing Mandrake 9.1 RC1 on a computer with 1024MB (1 gig) of memory after the initial "install screen" the computer just dies and the caps lock and scroll lock start blinking. This is a showstopper for the installation! Tried on 2 setups: P4 2.5 with ati 9700 Asus p4pe and AMD 2000+ with nvidia ti4600 Asus a7v8x. Both motherboards (after previous failure) flashed with the newest (beta) Bios -> Same problem. Same setup with 512 MB works just fine. CU PacMan
[Cooker] [Bug 1454] [kernel] orinoco_cs not really working: Error -5 writing Tx descriptor to BAP
http://qa.mandrakesoft.com/show_bug.cgi?id=1454 --- Additional Comments From [EMAIL PROTECTED] 2003-03-06 11:30 --- Working now since 2.4.21-0.11mdk --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: RESOLVED creation_date: description: When using the new orinoco_cs instead of the old but working and now missing wvlan_cs, the following happens: Feb 9 18:13:55 localhost cardmgr[23748]: socket 0: Lucent Technologies WaveLAN/IEEE Adapter Feb 9 18:13:55 localhost kernel: hermes.c: 5 Apr 2002 David Gibson <[EMAIL PROTECTED]> Feb 9 18:13:56 localhost kernel: orinoco.c 0.11b (David Gibson <[EMAIL PROTECTED]> and others) Feb 9 18:13:56 localhost kernel: orinoco_cs.c 0.11b (David Gibson <[EMAIL PROTECTED]> and others) Feb 9 18:13:56 localhost kernel: eth1: Station identity 001f:0001:0007:0034 Feb 9 18:13:56 localhost kernel: eth1: Looks like a Lucent/Agere firmware version 7.52 Feb 9 18:13:56 localhost kernel: eth1: Ad-hoc demo mode supported Feb 9 18:13:56 localhost kernel: eth1: IEEE standard IBSS ad-hoc mode supported Feb 9 18:13:56 localhost kernel: eth1: WEP supported, 104-bit key Feb 9 18:13:56 localhost kernel: eth1: Station name "HERMES I" Feb 9 18:13:56 localhost kernel: eth1: ready Feb 9 18:13:56 localhost kernel: eth1: index 0x01: Vcc 5.0, irq 4, io 0x0100-0x013f Feb 9 18:13:56 localhost /etc/hotplug/net.agent: invoke ifup eth1 Feb 9 18:13:57 localhost kernel: eth1: Error -5 writing Tx descriptor to BAP Feb 9 18:13:58 localhost last message repeated 627 times The system load gets up to 100%. After removing the card, the system load returns to normal. I've also tested this with another lucent card using firmware 6.16: same as above.
[Cooker] [Bug 1454] [kernel] orinoco_cs not really working: Error -5 writing Tx descriptor to BAP
http://qa.mandrakesoft.com/show_bug.cgi?id=1454 --- Additional Comments From [EMAIL PROTECTED] 2003-02-26 15:20 --- Could you send me the result of lspcidrake -v ? --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: When using the new orinoco_cs instead of the old but working and now missing wvlan_cs, the following happens: Feb 9 18:13:55 localhost cardmgr[23748]: socket 0: Lucent Technologies WaveLAN/IEEE Adapter Feb 9 18:13:55 localhost kernel: hermes.c: 5 Apr 2002 David Gibson <[EMAIL PROTECTED]> Feb 9 18:13:56 localhost kernel: orinoco.c 0.11b (David Gibson <[EMAIL PROTECTED]> and others) Feb 9 18:13:56 localhost kernel: orinoco_cs.c 0.11b (David Gibson <[EMAIL PROTECTED]> and others) Feb 9 18:13:56 localhost kernel: eth1: Station identity 001f:0001:0007:0034 Feb 9 18:13:56 localhost kernel: eth1: Looks like a Lucent/Agere firmware version 7.52 Feb 9 18:13:56 localhost kernel: eth1: Ad-hoc demo mode supported Feb 9 18:13:56 localhost kernel: eth1: IEEE standard IBSS ad-hoc mode supported Feb 9 18:13:56 localhost kernel: eth1: WEP supported, 104-bit key Feb 9 18:13:56 localhost kernel: eth1: Station name "HERMES I" Feb 9 18:13:56 localhost kernel: eth1: ready Feb 9 18:13:56 localhost kernel: eth1: index 0x01: Vcc 5.0, irq 4, io 0x0100-0x013f Feb 9 18:13:56 localhost /etc/hotplug/net.agent: invoke ifup eth1 Feb 9 18:13:57 localhost kernel: eth1: Error -5 writing Tx descriptor to BAP Feb 9 18:13:58 localhost last message repeated 627 times The system load gets up to 100%. After removing the card, the system load returns to normal. I've also tested this with another lucent card using firmware 6.16: same as above.
[Cooker] [Bug 2324] [kernel] 1024 MB kernel oops/panic -> Mandrake 9.1 RC1
https://qa.mandrakesoft.com/show_bug.cgi?id=2324 --- Additional Comments From [EMAIL PROTECTED] 2003-02-24 18:31 --- Oops, please ignore this and last message Le lun 24/02/2003 à 16:18, Planel Nicolas a écrit : --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Hi, When installing Mandrake 9.1 RC1 on a computer with 1024MB (1 gig) of memory after the initial "install screen" the computer just dies and the caps lock and scroll lock start blinking. This is a showstopper for the installation! Tried on 2 setups: P4 2.5 with ati 9700 Asus p4pe and AMD 2000+ with nvidia ti4600 Asus a7v8x. Both motherboards (after previous failure) flashed with the newest (beta) Bios -> Same problem. Same setup with 512 MB works just fine. CU PacMan
[Cooker] [Bug 2226] [kernel] Logitech Mx500 USB mouse not detected
https://qa.mandrakesoft.com/show_bug.cgi?id=2226 [EMAIL PROTECTED] changed: What|Removed |Added AssignedTo|1934|4967 --- Additional Comments From [EMAIL PROTECTED] 2003-02-24 18:31 --- Please try noapic option at boot time, so : When you boot from cd press the key and type "linux noapic" in the prompt If this workaround fix your problem please install your system and lm_sensors package, - send me the result of dmidecode (run it as root) - add noapic in append section of the /etc/lilo.conf (don't forget to run lilo after) --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: I have just installed Mandrake 9.1 rc1, and my Logitech Mx500 is not detected. When I use the PS2 adaptator, the mouse is well recognize, but with the USB plug, the mouse doesn't work neither in the installation program, nor in Xfree.
[Cooker] [Bug 2324] [kernel] 1024 MB kernel oops/panic -> Mandrake 9.1 RC1
https://qa.mandrakesoft.com/show_bug.cgi?id=2324 [EMAIL PROTECTED] changed: What|Removed |Added AssignedTo|1934|4967 --- Additional Comments From [EMAIL PROTECTED] 2003-02-24 16:20 --- Please try noapic option at boot time, so : When you boot from cd press the key and type "linux noapic" in the prompt If this workaround fix your problem please install your system and lm_sensors package, - send me the result of dmidecode (run it as root) - add noapic in append section of the /etc/lilo.conf (don't forget to run lilo after) --- You are receiving this mail because: --- You are on the CC list for the bug, or are watching someone who is. --- Reminder: --- assigned_to: [EMAIL PROTECTED] status: NEW creation_date: description: Hi, When installing Mandrake 9.1 RC1 on a computer with 1024MB (1 gig) of memory after the initial "install screen" the computer just dies and the caps lock and scroll lock start blinking. This is a showstopper for the installation! Tried on 2 setups: P4 2.5 with ati 9700 Asus p4pe and AMD 2000+ with nvidia ti4600 Asus a7v8x. Both motherboards (after previous failure) flashed with the newest (beta) Bios -> Same problem. Same setup with 512 MB works just fine. CU PacMan