Re: [Cooker] Evolution-0.1
This definitely would be handy. Jeremy Tan wrote: Okso where do i upload the files to ? Can't seem to get write permissions at the server and i tried to upload them at linux-mandrake's ftp but the server complained that it doesn't have enough space. I didn't notice the Don't Upload binaries thing in the directory listing until after i finished uploading the binaries. So I think the binary is still in the server.Where do i upload the files to ? On 28 May 2001 05:20:18 -0700, Brook Humphrey wrote: On Monday 28 May 2001 12:33 am, you wrote: Hi all, For those that use Evolution as their email program, I have edited the source code to remove the development warning window that loads at startup. I got the source code from the mandrake cooker rpms and the spec file that i used is the same one as included in mandrake's src rpm. So there shouldn't be much differences between the cooker version and my version except that you do not have to click OK everytime you start evolution. If anybody is interested, let me know. I will upload the program, devel and src rpms to the Mandrake contribs directory. I would be interested Regards, Jeremy Tan Jeremy Tan -- It requires a very unusual mind to undertake the analysis of the obvious. ANW
RE: [Cooker] Evolution-0.1
Okso where do i upload the files to ? Can't seem to get write permissions at the server and i tried to upload them at linux-mandrake's ftp but the server complained that it doesn't have enough space. I didn't notice the Don't Upload binaries thing in the directory listing until after i finished uploading the binaries. So I think the binary is still in the server.Where do i upload the files to ? On 28 May 2001 05:20:18 -0700, Brook Humphrey wrote: On Monday 28 May 2001 12:33 am, you wrote: Hi all, For those that use Evolution as their email program, I have edited the source code to remove the development warning window that loads at startup. I got the source code from the mandrake cooker rpms and the spec file that i used is the same one as included in mandrake's src rpm. So there shouldn't be much differences between the cooker version and my version except that you do not have to click OK everytime you start evolution. If anybody is interested, let me know. I will upload the program, devel and src rpms to the Mandrake contribs directory. I would be interested Regards, Jeremy Tan Jeremy Tan
Re: [Cooker] Evolution-0.1
On 28 May 2001 22:36:19 +0800 Jeremy Tan [EMAIL PROTECTED] wrote: Okso where do i upload the files to ? Can't seem to get write permissions at the server and i tried to upload them at linux-mandrake's ftp but the server complained that it doesn't have enough space. I didn't notice the Don't Upload binaries thing in the directory listing until after i finished uploading the binaries. So I think the binary is still in the server.Where do i upload the files to ? You can only upload src.rpms to incoming. If you want to make binaries available you should take care of that yourself, or wait till it appears in contrib. If you didn't make them available yet, you can use my ftp. Tell me if you are interested. I'll give you a password. On 28 May 2001 05:20:18 -0700, Brook Humphrey wrote: On Monday 28 May 2001 12:33 am, you wrote: Hi all, For those that use Evolution as their email program, I have edited the source code to remove the development warning window that loads at startup. I got the source code from the mandrake cooker rpms and the spec file that i used is the same one as included in mandrake's src rpm. So there shouldn't be much differences between the cooker version and my version except that you do not have to click OK everytime you start evolution. If anybody is interested, let me know. I will upload the program, devel and src rpms to the Mandrake contribs directory. I would be interested Regards, Jeremy Tan Jeremy Tan -- Marcel Pol [EMAIL PROTECTED] ...my cow ate the CDs.
RE: [Cooker] Evolution-0.1
You can send the details to my email account and I will upload the files to your ftp server as soon as I get the details. Thanx -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Marcel Pol Sent: Tuesday, May 29, 2001 3:41 AM To: [EMAIL PROTECTED] Subject: Re: [Cooker] Evolution-0.1 On 28 May 2001 22:36:19 +0800 Jeremy Tan [EMAIL PROTECTED] wrote: Okso where do i upload the files to ? Can't seem to get write permissions at the server and i tried to upload them at linux-mandrake's ftp but the server complained that it doesn't have enough space. I didn't notice the Don't Upload binaries thing in the directory listing until after i finished uploading the binaries. So I think the binary is still in the server.Where do i upload the files to ? You can only upload src.rpms to incoming. If you want to make binaries available you should take care of that yourself, or wait till it appears in contrib. If you didn't make them available yet, you can use my ftp. Tell me if you are interested. I'll give you a password. On 28 May 2001 05:20:18 -0700, Brook Humphrey wrote: On Monday 28 May 2001 12:33 am, you wrote: Hi all, For those that use Evolution as their email program, I have edited the source code to remove the development warning window that loads at startup. I got the source code from the mandrake cooker rpms and the spec file that i used is the same one as included in mandrake's src rpm. So there shouldn't be much differences between the cooker version and my version except that you do not have to click OK everytime you start evolution. If anybody is interested, let me know. I will upload the program, devel and src rpms to the Mandrake contribs directory. I would be interested Regards, Jeremy Tan Jeremy Tan -- Marcel Pol [EMAIL PROTECTED] ...my cow ate the CDs. _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
Re: [Cooker] Evolution-0.1
On Tue, 29 May 2001 04:17:31 +0800 Jeremy [EMAIL PROTECTED] wrote: You can send the details to my email account and I will upload the files to your ftp server as soon as I get the details. Ah, ok They're available at ftp://mpol.dhs.org In the directory ftp://mpol.dhs.org/Mandrake/Cooker -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Marcel Pol Sent: Tuesday, May 29, 2001 3:41 AM To: [EMAIL PROTECTED] Subject: Re: [Cooker] Evolution-0.1 On 28 May 2001 22:36:19 +0800 Jeremy Tan [EMAIL PROTECTED] wrote: Okso where do i upload the files to ? Can't seem to get write permissions at the server and i tried to upload them at linux-mandrake's ftp but the server complained that it doesn't have enough space. I didn't notice the Don't Upload binaries thing in the directory listing until after i finished uploading the binaries. So I think the binary is still in the server.Where do i upload the files to ? You can only upload src.rpms to incoming. If you want to make binaries available you should take care of that yourself, or wait till it appears in contrib. If you didn't make them available yet, you can use my ftp. Tell me if you are interested. I'll give you a password. On 28 May 2001 05:20:18 -0700, Brook Humphrey wrote: On Monday 28 May 2001 12:33 am, you wrote: Hi all, For those that use Evolution as their email program, I have edited the source code to remove the development warning window that loads at startup. I got the source code from the mandrake cooker rpms and the spec file that i used is the same one as included in mandrake's src rpm. So there shouldn't be much differences between the cooker version and my version except that you do not have to click OK everytime you start evolution. If anybody is interested, let me know. I will upload the program, devel and src rpms to the Mandrake contribs directory. I would be interested Regards, Jeremy Tan Jeremy Tan -- Marcel Pol [EMAIL PROTECTED] ...my cow ate the CDs. _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com -- Marcel Pol [EMAIL PROTECTED] ...my cow ate the CDs.
Re: [Cooker] Evolution-0.1
On Monday 28 May 2001 01:56 pm, you wrote: On Tue, 29 May 2001 04:17:31 +0800 Jeremy [EMAIL PROTECTED] wrote: You can send the details to my email account and I will upload the files to your ftp server as soon as I get the details. Ah, ok They're available at ftp://mpol.dhs.org In the directory ftp://mpol.dhs.org/Mandrake/Cooker It requires a password to download -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Marcel Pol Sent: Tuesday, May 29, 2001 3:41 AM To: [EMAIL PROTECTED] Subject: Re: [Cooker] Evolution-0.1 On 28 May 2001 22:36:19 +0800 Jeremy Tan [EMAIL PROTECTED] wrote: Okso where do i upload the files to ? Can't seem to get write permissions at the server and i tried to upload them at linux-mandrake's ftp but the server complained that it doesn't have enough space. I didn't notice the Don't Upload binaries thing in the directory listing until after i finished uploading the binaries. So I think the binary is still in the server.Where do i upload the files to ? You can only upload src.rpms to incoming. If you want to make binaries available you should take care of that yourself, or wait till it appears in contrib. If you didn't make them available yet, you can use my ftp. Tell me if you are interested. I'll give you a password. On 28 May 2001 05:20:18 -0700, Brook Humphrey wrote: On Monday 28 May 2001 12:33 am, you wrote: Hi all, For those that use Evolution as their email program, I have edited the source code to remove the development warning window that loads at startup. I got the source code from the mandrake cooker rpms and the spec file that i used is the same one as included in mandrake's src rpm. So there shouldn't be much differences between the cooker version and my version except that you do not have to click OK everytime you start evolution. If anybody is interested, let me know. I will upload the program, devel and src rpms to the Mandrake contribs directory. I would be interested Regards, Jeremy Tan Jeremy Tan -- Marcel Pol [EMAIL PROTECTED] ...my cow ate the CDs. _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com -- Marcel Pol [EMAIL PROTECTED] ...my cow ate the CDs. -- -~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~- Brook Humphrey Mobile PC Medic, 420 1st, Cheney, WA 99004, 509-235-9107 http://www.webmedic.net, [EMAIL PROTECTED], [EMAIL PROTECTED] -~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~- My posting or sending this is NOT an invitation for spammers to say that I've asked to be put on a mailing list. You are not permitted to send unsolicited bulk email (commonly referred to as spam) to this address, or to sell this address to people who do. By extracting the address from this page, you agree to pay a fee of $10,000.00 per UBE message you send and $100,000.00 per instance you sold this address. ___-~-___ Holliness unto the Lord He must increase but I must decrease. *-~-*
Re: [Cooker] Evolution-0.1
On Mon, 28 May 2001 13:58:42 -0700 Brook Humphrey [EMAIL PROTECTED] wrote: On Monday 28 May 2001 01:56 pm, you wrote: On Tue, 29 May 2001 04:17:31 +0800 Jeremy [EMAIL PROTECTED] wrote: You can send the details to my email account and I will upload the files to your ftp server as soon as I get the details. Ah, ok They're available at ftp://mpol.dhs.org In the directory ftp://mpol.dhs.org/Mandrake/Cooker It requires a password to download Sorry, my mistake. Hope it's ok now. Oh, it's not such a fast connection though... Hope it's good enough. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Marcel Pol Sent: Tuesday, May 29, 2001 3:41 AM To: [EMAIL PROTECTED] Subject: Re: [Cooker] Evolution-0.1 On 28 May 2001 22:36:19 +0800 Jeremy Tan [EMAIL PROTECTED] wrote: Okso where do i upload the files to ? Can't seem to get write permissions at the server and i tried to upload them at linux-mandrake's ftp but the server complained that it doesn't have enough space. I didn't notice the Don't Upload binaries thing in the directory listing until after i finished uploading the binaries. So I think the binary is still in the server.Where do i upload the files to ? You can only upload src.rpms to incoming. If you want to make binaries available you should take care of that yourself, or wait till it appears in contrib. If you didn't make them available yet, you can use my ftp. Tell me if you are interested. I'll give you a password. On 28 May 2001 05:20:18 -0700, Brook Humphrey wrote: On Monday 28 May 2001 12:33 am, you wrote: Hi all, For those that use Evolution as their email program, I have edited the source code to remove the development warning window that loads at startup. I got the source code from the mandrake cooker rpms and the spec file that i used is the same one as included in mandrake's src rpm. So there shouldn't be much differences between the cooker version and my version except that you do not have to click OK everytime you start evolution. If anybody is interested, let me know. I will upload the program, devel and src rpms to the Mandrake contribs directory. I would be interested Regards, Jeremy Tan Jeremy Tan -- Marcel Pol [EMAIL PROTECTED] ...my cow ate the CDs. _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com -- Marcel Pol [EMAIL PROTECTED] ...my cow ate the CDs. -- -~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~- Brook Humphrey Mobile PC Medic, 420 1st, Cheney, WA 99004, 509-235-9107 http://www.webmedic.net, [EMAIL PROTECTED], [EMAIL PROTECTED] -~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~- My posting or sending this is NOT an invitation for spammers to say that I've asked to be put on a mailing list. You are not permitted to send unsolicited bulk email (commonly referred to as spam) to this address, or to sell this address to people who do. By extracting the address from this page, you agree to pay a fee of $10,000.00 per UBE message you send and $100,000.00 per instance you sold this address. ___-~-___ Holliness unto the Lord He must increase but I must decrease. *-~-* -- Marcel Pol [EMAIL PROTECTED] ...my cow ate the CDs.
Re: [Cooker] Evolution-0.1
On Monday 28 May 2001 02:16 pm, you wrote: On Mon, 28 May 2001 13:58:42 -0700 Sorry, my mistake. Hope it's ok now. Oh, it's not such a fast connection though... Hope it's good enough. It worked good so do the rpm's -- -~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~- Brook Humphrey Mobile PC Medic, 420 1st, Cheney, WA 99004, 509-235-9107 http://www.webmedic.net, [EMAIL PROTECTED], [EMAIL PROTECTED] -~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~-~`'~- My posting or sending this is NOT an invitation for spammers to say that I've asked to be put on a mailing list. You are not permitted to send unsolicited bulk email (commonly referred to as spam) to this address, or to sell this address to people who do. By extracting the address from this page, you agree to pay a fee of $10,000.00 per UBE message you send and $100,000.00 per instance you sold this address. ___-~-___ Holliness unto the Lord He must increase but I must decrease. *-~-*
Re: [Cooker] Evolution-0.1
I've posted an offer several times but I will extend it once again. If anyone has ANY cooker related or general Linux files they would like to make available please email me directly and I will send you the ftp info for my ftp and then post a message to the list when I get the files online. =) -Tim McKenzie [EMAIL PROTECTED] - Original Message - From: Jeremy Tan [EMAIL PROTECTED] To: Cooker Mailing List [EMAIL PROTECTED] Sent: Monday, May 28, 2001 10:36 AM Subject: RE: [Cooker] Evolution-0.1 Okso where do i upload the files to ? Can't seem to get write permissions at the server and i tried to upload them at linux-mandrake's ftp but the server complained that it doesn't have enough space. I didn't notice the Don't Upload binaries thing in the directory listing until after i finished uploading the binaries. So I think the binary is still in the server.Where do i upload the files to ? On 28 May 2001 05:20:18 -0700, Brook Humphrey wrote: On Monday 28 May 2001 12:33 am, you wrote: Hi all, For those that use Evolution as their email program, I have edited the source code to remove the development warning window that loads at startup. I got the source code from the mandrake cooker rpms and the spec file that i used is the same one as included in mandrake's src rpm. So there shouldn't be much differences between the cooker version and my version except that you do not have to click OK everytime you start evolution. If anybody is interested, let me know. I will upload the program, devel and src rpms to the Mandrake contribs directory. I would be interested Regards, Jeremy Tan Jeremy Tan
