Re: [Cooker] ata66 on a-bit be6 still not working
With either a CDROM boot or a floppy built by dd'ing cdrom.img. Should I try something else? -- On Thu, 11 May 2000, you wrote: > "Jonathan M. Prigot" <[EMAIL PROTECTED]> writes: > > > I don't know how yours is failing, but on my Soyo 6BA-IV+, it recognizes the > > HPT366 chip on the IDE2 and IDE3 interfaces, but it cannot find /dev/hde which > > is where my system disk is. Mandrake 7.0-0 (using the "new" boot floppy) didn't > > have this problem. > > with latest cooker ? -- Jonathan M. Prigot (617-278-0794) Brigham and Women's Hospital 900 Commonwealth Avenue, East Boston, MA 02215-1213
RE: [Cooker] ata66 on a-bit be6 still not working
Yes, 7.1 beta b. Under Mandrake 7.0 it worked ok, but with out the increased speed. It only recognized the drive and allowed you to use it. But 7.1 betas won't even recognize it. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Thursday, May 11, 2000 4:45 AM To: [EMAIL PROTECTED] Subject: Re: [Cooker] ata66 on a-bit be6 still not working "Jonathan M. Prigot" <[EMAIL PROTECTED]> writes: > I don't know how yours is failing, but on my Soyo 6BA-IV+, it recognizes the > HPT366 chip on the IDE2 and IDE3 interfaces, but it cannot find /dev/hde which > is where my system disk is. Mandrake 7.0-0 (using the "new" boot floppy) didn't > have this problem. with latest cooker ?
Re: [Cooker] ata66 on a-bit be6 still not working
"Jonathan M. Prigot" <[EMAIL PROTECTED]> writes: > I don't know how yours is failing, but on my Soyo 6BA-IV+, it recognizes the > HPT366 chip on the IDE2 and IDE3 interfaces, but it cannot find /dev/hde which > is where my system disk is. Mandrake 7.0-0 (using the "new" boot floppy) didn't > have this problem. with latest cooker ?
Re: [Cooker] ata66 on a-bit be6 still not working
David Talbot wrote: > > I agree. I know you mandrake guys are fighting to get 7.1 out the door, but > I'm willing to do a few more fresh installs from ISOs if it means I have a > linux distribution in my hands that is so solid I can put the CD into > virtually any (reasonable) computer and have it install and properly detect > everything. > I'd vote for that. Esp. if there is more than one site serving isos (I'd like to see if the menus get set up properly in kde since beta2) -randy
RE: [Cooker] ata66 on a-bit be6 still not working
then that could be the problem since my ata66 drive would be hde, actually my install partition would be hde6. Bryan -Original Message- From: Jonathan M. Prigot [mailto:[EMAIL PROTECTED]] Sent: Wednesday, May 10, 2000 6:43 PM To: [EMAIL PROTECTED] Subject: Re: [Cooker] ata66 on a-bit be6 still not working I don't know how yours is failing, but on my Soyo 6BA-IV+, it recognizes the HPT366 chip on the IDE2 and IDE3 interfaces, but it cannot find /dev/hde which is where my system disk is. Mandrake 7.0-0 (using the "new" boot floppy) didn't have this problem. --- > >On Wed, 10 May 2000, B. K. Barley wrote: > > > >> Hi, > >> > >> Just downloaded the iso of 7.1 beta b. And setup still fails to recognize > >> an ata66 drive on the a-bit motherboard. I tried passing the io address to > >> the install kernel and it still will not work. I need to install linux on > >> this partition. Thought it was fixed in beta b. > >> > >> B. K. Barley > >> > >> -- Jonathan M. Prigot (781-828-6606) 44 High Street Canton, MA 02021-3609
Re: [Cooker] ata66 on a-bit be6 still not working
I don't know how yours is failing, but on my Soyo 6BA-IV+, it recognizes the HPT366 chip on the IDE2 and IDE3 interfaces, but it cannot find /dev/hde which is where my system disk is. Mandrake 7.0-0 (using the "new" boot floppy) didn't have this problem. --- > >On Wed, 10 May 2000, B. K. Barley wrote: > > > >> Hi, > >> > >> Just downloaded the iso of 7.1 beta b. And setup still fails to recognize > >> an ata66 drive on the a-bit motherboard. I tried passing the io address to > >> the install kernel and it still will not work. I need to install linux on > >> this partition. Thought it was fixed in beta b. > >> > >> B. K. Barley > >> > >> -- Jonathan M. Prigot (781-828-6606) 44 High Street Canton, MA 02021-3609
Re: [Cooker] ata66 on a-bit be6 still not working
I agree. I know you mandrake guys are fighting to get 7.1 out the door, but I'm willing to do a few more fresh installs from ISOs if it means I have a linux distribution in my hands that is so solid I can put the CD into virtually any (reasonable) computer and have it install and properly detect everything. BTW any plans for an NC100 driver? -David Talbot At 12:57 PM 5/10/00 -0700, you wrote: >Perhaps a 7.1 beta 3 iso should be made available to aleviate redundant >bug reports. > >Eric. > >On Wed, 10 May 2000, B. K. Barley wrote: > >> Hi, >> >> Just downloaded the iso of 7.1 beta b. And setup still fails to recognize >> an ata66 drive on the a-bit motherboard. I tried passing the io address to >> the install kernel and it still will not work. I need to install linux on >> this partition. Thought it was fixed in beta b. >> >> B. K. Barley >> >>
Re: [Cooker] ata66 on a-bit be6 still not working
Perhaps a 7.1 beta 3 iso should be made available to aleviate redundant bug reports. Eric. On Wed, 10 May 2000, B. K. Barley wrote: > Hi, > > Just downloaded the iso of 7.1 beta b. And setup still fails to recognize > an ata66 drive on the a-bit motherboard. I tried passing the io address to > the install kernel and it still will not work. I need to install linux on > this partition. Thought it was fixed in beta b. > > B. K. Barley > >
Re: [Cooker] ata66 on a-bit be6 still not working
"B. K. Barley" <[EMAIL PROTECTED]> writes: > Hi, > > Just downloaded the iso of 7.1 beta b. And setup still fails to recognize > an ata66 drive on the a-bit motherboard. I tried passing the io address to > the install kernel and it still will not work. I need to install linux on > this partition. Thought it was fixed in beta b. > What UDMA chipset is it? Promise, HPT? -- fg "You can tune a filesystem but you can't tuna fish" (HP/UX' tunefs manpage)
[Cooker] ata66 on a-bit be6 still not working
Hi, Just downloaded the iso of 7.1 beta b. And setup still fails to recognize an ata66 drive on the a-bit motherboard. I tried passing the io address to the install kernel and it still will not work. I need to install linux on this partition. Thought it was fixed in beta b. B. K. Barley
