Re: [Cooker] sblive (soundblaster live) and smp enabled
Roger <[EMAIL PROTECTED]> writes: > O.k. resolved it. went into the /emu10k1/Makefile and change the follwoing: > > smp = y > modversions = y > > and then recompiled. > > went fine this timestill have to check to see if the sound works! looks > like it should according to my previous installs. (no errors showing so far). > why is all this needed? pixel@leia:/tmp>rpm -qpl /RPMS/kernel-2.2.14-12mdk.i586.rpm | grep emu /lib/modules/2.2.14-12mdk/misc/emu10k1.o pixel@leia:/tmp>rpm -qpl /RPMS/kernel-smp-2.2.14-12mdk.i586.rpm | grep emu /lib/modules/2.2.14-12mdksmp/misc/emu10k1.o
Re: [Cooker] sblive (soundblaster live) and smp enabled
Also, just went my website that has midi sound on it and guess what? It works! Usually netscape will wine and complain about a pluggin required! dunno if this was mandrake or sblive, but the sblive had some troubles with midi. i'll stop on this matter since this is resolved and i burned an email off to the ~email (sblive instruction site) on the makefile configuration issue. Sounds like this is the main reason for it not being within the kernel yet (or whatever)...bummer. On Sun, 02 Jan 2000, you wrote: > Yup, it works.(gleefully trying to restrain my self endulged > over-excitement) > > had to reinstall the rpm "licq-data*" since it didn't install the sounds. > also, sounds are found in the /usr/share/licq* dir. should they really be > located within the /home/[user]/.licq directory? > > not complaining one bit! got sblive installed, cd-rw apperantly working (if > not, i made the orange light flash and one coaster!). > > i'll email that persons site and let him know of what i had to do, if the bug > is at his end. > > now just for this stupid lexmark 2050 paper weightmaybe i'll be able to > make the cartridges move sometime soon! > > > On Sun, 02 Jan 2000, you wrote: > > O.k. resolved it. went into the /emu10k1/Makefile and change the follwoing: > > > > smp = y > > modversions = y > > > > and then recompiled. > > > > went fine this timestill have to check to see if the sound works! looks > > like it should according to my previous installs. (no errors showing so far). > > > > > > > > On Sun, 02 Jan 2000, you wrote: > > > using directions found at: > > > > > > http://www.euronet.nl/~mailme/index3.html > > > > > > and downloaded the most recent snapshot from: > > > > > > ftp://opensource.creative.com/pub/snapshots (emu10k1.tar.gz) > > > > > > i get the following error when initiating the /sbin/depmod -a command: > > > > > > /lib/modules/2.2.14-11mdksmp/misc/emu10k1.o: unresolved symbols(s) > > > > > > when doing the modprobe/insmod emu10k1, get tons of unresolved symbols. as > > > usual, i just recompile the kernel to get rid of the "unresolved symbols" and > > > then the sound works for sblive. > > > > > > > > > -- > > > > > > > > > Sent from: > > > > > > Lattitude (deg): 32.7130 > > > Longitude (deg): -117.1530 > > > Altitude (ft):410.0 > > > GMT to Local (hrs): -8.0 (daylight savings enabled) > > > > > > > > > > > > Created with Linux-Mandrake 6.1! > > > > > > http://www.linux-mandrake.com/ > > > > > > Currently Beta Testing Mandrake Ver 7.0 (CODE NAMED: OXYGEN) > > -- > > > > > > Sent from: > > > > Lattitude (deg):32.7130 > > Longitude (deg):-117.1530 > > Altitude (ft): 410.0 > > GMT to Local (hrs): -8.0 (daylight savings enabled) > > > > > > > > Created with Linux-Mandrake 6.1! > > > > http://www.linux-mandrake.com/ > > > > Currently Beta Testing Mandrake Ver 7.0 (CODE NAMED: OXYGEN) > -- > > > Sent from: > > Lattitude (deg): 32.7130 > Longitude (deg): -117.1530 > Altitude (ft):410.0 > GMT to Local (hrs): -8.0 (daylight savings enabled) > > > > Created with Linux-Mandrake 6.1! > > http://www.linux-mandrake.com/ > > Currently Beta Testing Mandrake Ver 7.0 (CODE NAMED: OXYGEN) -- Sent from: Lattitude (deg):32.7130 Longitude (deg):-117.1530 Altitude (ft): 410.0 GMT to Local (hrs): -8.0 (daylight savings enabled) Created with Linux-Mandrake 6.1! http://www.linux-mandrake.com/ Currently Beta Testing Mandrake Ver 7.0 (CODE NAMED: OXYGEN)
Re: [Cooker] sblive (soundblaster live) and smp enabled
Yup, it works.(gleefully trying to restrain my self endulged over-excitement) had to reinstall the rpm "licq-data*" since it didn't install the sounds. also, sounds are found in the /usr/share/licq* dir. should they really be located within the /home/[user]/.licq directory? not complaining one bit! got sblive installed, cd-rw apperantly working (if not, i made the orange light flash and one coaster!). i'll email that persons site and let him know of what i had to do, if the bug is at his end. now just for this stupid lexmark 2050 paper weightmaybe i'll be able to make the cartridges move sometime soon! On Sun, 02 Jan 2000, you wrote: > O.k. resolved it. went into the /emu10k1/Makefile and change the follwoing: > > smp = y > modversions = y > > and then recompiled. > > went fine this timestill have to check to see if the sound works! looks > like it should according to my previous installs. (no errors showing so far). > > > > On Sun, 02 Jan 2000, you wrote: > > using directions found at: > > > > http://www.euronet.nl/~mailme/index3.html > > > > and downloaded the most recent snapshot from: > > > > ftp://opensource.creative.com/pub/snapshots (emu10k1.tar.gz) > > > > i get the following error when initiating the /sbin/depmod -a command: > > > > /lib/modules/2.2.14-11mdksmp/misc/emu10k1.o: unresolved symbols(s) > > > > when doing the modprobe/insmod emu10k1, get tons of unresolved symbols. as > > usual, i just recompile the kernel to get rid of the "unresolved symbols" and > > then the sound works for sblive. > > > > > > -- > > > > > > Sent from: > > > > Lattitude (deg):32.7130 > > Longitude (deg):-117.1530 > > Altitude (ft): 410.0 > > GMT to Local (hrs): -8.0 (daylight savings enabled) > > > > > > > > Created with Linux-Mandrake 6.1! > > > > http://www.linux-mandrake.com/ > > > > Currently Beta Testing Mandrake Ver 7.0 (CODE NAMED: OXYGEN) > -- > > > Sent from: > > Lattitude (deg): 32.7130 > Longitude (deg): -117.1530 > Altitude (ft):410.0 > GMT to Local (hrs): -8.0 (daylight savings enabled) > > > > Created with Linux-Mandrake 6.1! > > http://www.linux-mandrake.com/ > > Currently Beta Testing Mandrake Ver 7.0 (CODE NAMED: OXYGEN) -- Sent from: Lattitude (deg):32.7130 Longitude (deg):-117.1530 Altitude (ft): 410.0 GMT to Local (hrs): -8.0 (daylight savings enabled) Created with Linux-Mandrake 6.1! http://www.linux-mandrake.com/ Currently Beta Testing Mandrake Ver 7.0 (CODE NAMED: OXYGEN)
Re: [Cooker] sblive (soundblaster live) and smp enabled
O.k. resolved it. went into the /emu10k1/Makefile and change the follwoing: smp = y modversions = y and then recompiled. went fine this timestill have to check to see if the sound works! looks like it should according to my previous installs. (no errors showing so far). On Sun, 02 Jan 2000, you wrote: > using directions found at: > > http://www.euronet.nl/~mailme/index3.html > > and downloaded the most recent snapshot from: > > ftp://opensource.creative.com/pub/snapshots (emu10k1.tar.gz) > > i get the following error when initiating the /sbin/depmod -a command: > > /lib/modules/2.2.14-11mdksmp/misc/emu10k1.o: unresolved symbols(s) > > when doing the modprobe/insmod emu10k1, get tons of unresolved symbols. as > usual, i just recompile the kernel to get rid of the "unresolved symbols" and > then the sound works for sblive. > > > -- > > > Sent from: > > Lattitude (deg): 32.7130 > Longitude (deg): -117.1530 > Altitude (ft):410.0 > GMT to Local (hrs): -8.0 (daylight savings enabled) > > > > Created with Linux-Mandrake 6.1! > > http://www.linux-mandrake.com/ > > Currently Beta Testing Mandrake Ver 7.0 (CODE NAMED: OXYGEN) -- Sent from: Lattitude (deg):32.7130 Longitude (deg):-117.1530 Altitude (ft): 410.0 GMT to Local (hrs): -8.0 (daylight savings enabled) Created with Linux-Mandrake 6.1! http://www.linux-mandrake.com/ Currently Beta Testing Mandrake Ver 7.0 (CODE NAMED: OXYGEN)
[Cooker] sblive (soundblaster live) and smp enabled
using directions found at: http://www.euronet.nl/~mailme/index3.html and downloaded the most recent snapshot from: ftp://opensource.creative.com/pub/snapshots (emu10k1.tar.gz) i get the following error when initiating the /sbin/depmod -a command: /lib/modules/2.2.14-11mdksmp/misc/emu10k1.o: unresolved symbols(s) when doing the modprobe/insmod emu10k1, get tons of unresolved symbols. as usual, i just recompile the kernel to get rid of the "unresolved symbols" and then the sound works for sblive. -- Sent from: Lattitude (deg):32.7130 Longitude (deg):-117.1530 Altitude (ft): 410.0 GMT to Local (hrs): -8.0 (daylight savings enabled) Created with Linux-Mandrake 6.1! http://www.linux-mandrake.com/ Currently Beta Testing Mandrake Ver 7.0 (CODE NAMED: OXYGEN)
