[Cooker-PPC] ATI XClaim VR Modelines
If anyone is using an xclaim vr at 1024x768@75Hz, could you please send your modeline for it ? Thanks, AH - Original Message - From: "Stew Benedict" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, November 05, 2002 8:07 PM Subject: Re: [Cooker-PPC] Changing display mode > > On Tue, 5 Nov 2002, Alex Horvath wrote: > > > Stew, > > > > the error I get from Mandrake Control Center is: > > > > (EE)Mouse1: Unknown protocol "imps2" > > (EE) Preinit failed for input device "Mouse1" > > > > Also, of I use /dev/usbmouse, the mouse stops working. I'm currently using > > /dev/input/mice. > > > > The default install should look like this for usb or adb mice: > > [stew@powerbook stew]$ ls -l /dev/mouse > lr-xr-xr-x1 root root8 Oct 26 08:25 /dev/mouse -> usbmouse > [stew@powerbook stew]$ ls -l /dev/usbmouse > lr-xr-xr-x1 root root 10 Oct 26 08:25 /dev/usbmouse -> input/mice > > > If I add a modeline from the site, it gives me a Signal 11, if I comment it > > out, x starts fine. Funny thing is, the modeline I add is for 1024x768, and > > the default resolution is 800x600, so it shouldn't even look at it until I > > try to change the res with xfdrake. > > > > Sounds like the modeline isn't valid then. There are already several > 1024x768 modelines in the file ( I count 4 here), plus the X server in in > many case capable of working this out itself, you just add a resolution > entry: > > Subsection "Display" > Depth 24 > Modes "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubsection > > > > I'll keep working at it. > > - Original Message - > > From: "Stew Benedict" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Monday, November 04, 2002 7:39 PM > > Subject: Re: [Cooker-PPC] Changing display mode > > > > > > > > > > On Mon, 4 Nov 2002, Alex Horvath wrote: > > > > > > > Hi All > > > > > > > > I have a Supermac j900 running Mandrake 8.2PPC. > > > > > > > > I've got an ATI Xclaim VR (Rage II) and an Apple 17" Monitor. > > > > > > > > The current display mode is 800x600 (i think the refresh is 75). > > > > > > > > I'd like to change the display mode to 1024x768 @75 or 85, but I can't > > seem to do it. > > > > > > > > I figured out that X is using the /etc/X11/XF86Config-4 file for the > > configs, but if I add 1024x768 to the Screen section, X errors out with a > > signal 11. > > > > > > > > I know that the monitor and card can do 1024x768@75 because I use this > > on the MacOS. > > > > > > > > I've tried the default 1024x768 settings, plus my own that I generated > > at http://xtiming.sourceforge.net > > > > > > > > Thanks in advance!!! > > > > > > > > > > Hi Alan, > > > > > > I saw this earlier. It's odd that trying different resolutions would > > > cause a signal 11. Normally X would just exit saying it couldn't do that > > > resolution or fall back to a lower one. The server certainly is capable > > > of it, I run 1024x768 on all my machines. Sometimes if your horizontal or > > > vertical frequency range limit is too narrow, the X server may think it > > > can't achieve the desired resolution, but still it shouldn't generate a > > > signal 11. > > > > > > Stew Benedict > > > > > > -- > > > MandrakeSoft > > > PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3 > > > IRC: irc.openproject.net #cooker-ppc > > > Archives: http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&r=1&w=2 > > > > > > > > > > > > > > > Stew Benedict > > -- > MandrakeSoft > PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3 > IRC: irc.openproject.net #cooker-ppc > Archives: http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&r=1&w=2 > >
Re: [Cooker-PPC] Changing display mode
Stew, This is interesting. Found out by studying the log file that 4MB isn't enough to do 1024x768 @ 24bit colour. Fine, changed the default colour to 16. I can do 1024x768 @ millions of colours (24bit) on the MacOS. I had added a few 1024x768 modelines. X started, but it flickered on and off, like it couldn't sync. So I REM'd all but one of the 1024x768 modelines. X wouldn't start. UnREM'd another one, it started. It seems X needs at least 2 modelines for each resolution, even if the two are the same. Fine. I tried a bunch of different modelines with different refresh rates, and each one gave me the same result: a screen that jitters because it can't sync to the card. It works perfectly in the MacOS. I noticed that some of the Mac modes have +- hsync and vsync, so I tried playing with those, but it didn't help. The logfile confirms that X is using the modeline I specified, so I know it's not just picking a mode form thin air. Is there something I'm missing ? I can't figure this out. Also, even in the 800x600 mode, it will start to flicker after about 10 minutes. If i switch to text mode and back, it clears itself for another 10 minutes. I don't know what to do anymore. Thanks, AH - Original Message - From: "Stew Benedict" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, November 05, 2002 8:07 PM Subject: Re: [Cooker-PPC] Changing display mode > > On Tue, 5 Nov 2002, Alex Horvath wrote: > > > Stew, > > > > the error I get from Mandrake Control Center is: > > > > (EE)Mouse1: Unknown protocol "imps2" > > (EE) Preinit failed for input device "Mouse1" > > > > Also, of I use /dev/usbmouse, the mouse stops working. I'm currently using > > /dev/input/mice. > > > > The default install should look like this for usb or adb mice: > > [stew@powerbook stew]$ ls -l /dev/mouse > lr-xr-xr-x1 root root8 Oct 26 08:25 /dev/mouse -> usbmouse > [stew@powerbook stew]$ ls -l /dev/usbmouse > lr-xr-xr-x1 root root 10 Oct 26 08:25 /dev/usbmouse -> input/mice > > > If I add a modeline from the site, it gives me a Signal 11, if I comment it > > out, x starts fine. Funny thing is, the modeline I add is for 1024x768, and > > the default resolution is 800x600, so it shouldn't even look at it until I > > try to change the res with xfdrake. > > > > Sounds like the modeline isn't valid then. There are already several > 1024x768 modelines in the file ( I count 4 here), plus the X server in in > many case capable of working this out itself, you just add a resolution > entry: > > Subsection "Display" > Depth 24 > Modes "1024x768" "800x600" "640x480" > ViewPort 0 0 > EndSubsection > > > > I'll keep working at it. > > - Original Message - > > From: "Stew Benedict" <[EMAIL PROTECTED]> > > To: <[EMAIL PROTECTED]> > > Sent: Monday, November 04, 2002 7:39 PM > > Subject: Re: [Cooker-PPC] Changing display mode > > > > > > > > > > On Mon, 4 Nov 2002, Alex Horvath wrote: > > > > > > > Hi All > > > > > > > > I have a Supermac j900 running Mandrake 8.2PPC. > > > > > > > > I've got an ATI Xclaim VR (Rage II) and an Apple 17" Monitor. > > > > > > > > The current display mode is 800x600 (i think the refresh is 75). > > > > > > > > I'd like to change the display mode to 1024x768 @75 or 85, but I can't > > seem to do it. > > > > > > > > I figured out that X is using the /etc/X11/XF86Config-4 file for the > > configs, but if I add 1024x768 to the Screen section, X errors out with a > > signal 11. > > > > > > > > I know that the monitor and card can do 1024x768@75 because I use this > > on the MacOS. > > > > > > > > I've tried the default 1024x768 settings, plus my own that I generated > > at http://xtiming.sourceforge.net > > > > > > > > Thanks in advance!!! > > > > > > > > > > Hi Alan, > > > > > > I saw this earlier. It's odd that trying different resolutions would > > > cause a signal 11. Normally X would just exit saying it couldn't do that > > > resolution or fall back to a lower one. The server certainly is capable > > > of it, I run 1024x768 on all my machines. Sometimes if your horizontal or > > > vertical frequency range limit is too narrow, the X server may think it > > > can't achieve the desired resolution, but still it shouldn't generate a > > > signal 11. > > > > > > Stew Benedict > > > > > > -- > > > MandrakeSoft > > > PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3 > > > IRC: irc.openproject.net #cooker-ppc > > > Archives: http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&r=1&w=2 > > > > > > > > > > > > > > > Stew Benedict > > -- > MandrakeSoft > PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3 > IRC: irc.openproject.net #cooker-ppc > Archives: http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&r=1&w=2 > >
Re: [Cooker-PPC] Changing display mode
On Tue, 5 Nov 2002, Alex Horvath wrote: > Stew, > > the error I get from Mandrake Control Center is: > > (EE)Mouse1: Unknown protocol "imps2" > (EE) Preinit failed for input device "Mouse1" > > Also, of I use /dev/usbmouse, the mouse stops working. I'm currently using > /dev/input/mice. > The default install should look like this for usb or adb mice: [stew@powerbook stew]$ ls -l /dev/mouse lr-xr-xr-x1 root root8 Oct 26 08:25 /dev/mouse -> usbmouse [stew@powerbook stew]$ ls -l /dev/usbmouse lr-xr-xr-x1 root root 10 Oct 26 08:25 /dev/usbmouse -> input/mice > If I add a modeline from the site, it gives me a Signal 11, if I comment it > out, x starts fine. Funny thing is, the modeline I add is for 1024x768, and > the default resolution is 800x600, so it shouldn't even look at it until I > try to change the res with xfdrake. > Sounds like the modeline isn't valid then. There are already several 1024x768 modelines in the file ( I count 4 here), plus the X server in in many case capable of working this out itself, you just add a resolution entry: Subsection "Display" Depth 24 Modes "1024x768" "800x600" "640x480" ViewPort 0 0 EndSubsection > I'll keep working at it. > - Original Message - > From: "Stew Benedict" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, November 04, 2002 7:39 PM > Subject: Re: [Cooker-PPC] Changing display mode > > > > > > On Mon, 4 Nov 2002, Alex Horvath wrote: > > > > > Hi All > > > > > > I have a Supermac j900 running Mandrake 8.2PPC. > > > > > > I've got an ATI Xclaim VR (Rage II) and an Apple 17" Monitor. > > > > > > The current display mode is 800x600 (i think the refresh is 75). > > > > > > I'd like to change the display mode to 1024x768 @75 or 85, but I can't > seem to do it. > > > > > > I figured out that X is using the /etc/X11/XF86Config-4 file for the > configs, but if I add 1024x768 to the Screen section, X errors out with a > signal 11. > > > > > > I know that the monitor and card can do 1024x768@75 because I use this > on the MacOS. > > > > > > I've tried the default 1024x768 settings, plus my own that I generated > at http://xtiming.sourceforge.net > > > > > > Thanks in advance!!! > > > > > > > Hi Alan, > > > > I saw this earlier. It's odd that trying different resolutions would > > cause a signal 11. Normally X would just exit saying it couldn't do that > > resolution or fall back to a lower one. The server certainly is capable > > of it, I run 1024x768 on all my machines. Sometimes if your horizontal or > > vertical frequency range limit is too narrow, the X server may think it > > can't achieve the desired resolution, but still it shouldn't generate a > > signal 11. > > > > Stew Benedict > > > > -- > > MandrakeSoft > > PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3 > > IRC: irc.openproject.net #cooker-ppc > > Archives: http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&r=1&w=2 > > > > > > > > Stew Benedict -- MandrakeSoft PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3 IRC: irc.openproject.net #cooker-ppc Archives: http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&r=1&w=2
Stefan Mintier
Stefan, in the /etc/X11/XF86Config-4, in the "InputDevice" "Mouse1" section, change "dev/usbmouse" to "dev'input/mice" See Stew's previous email for the key mapping code for 2nd and 3rd buttons. Thanks Stew!!! AH - Original Message - From: "Stefan Mintier" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, November 05, 2002 2:12 PM Subject: Alex Horvath > Alex > I too have a UMAX s900 and have had trouble with configuring my adb > mouse among other things. I was wondering if I could correspond with > you about configuring my machine? my E-mail address is > [EMAIL PROTECTED] > Thank you very much for your time > Stefan > -- >
Re: [Cooker-PPC] Changing display mode
Stew, the error I get from Mandrake Control Center is: (EE)Mouse1: Unknown protocol "imps2" (EE) Preinit failed for input device "Mouse1" Also, of I use /dev/usbmouse, the mouse stops working. I'm currently using /dev/input/mice. If I add a modeline from the site, it gives me a Signal 11, if I comment it out, x starts fine. Funny thing is, the modeline I add is for 1024x768, and the default resolution is 800x600, so it shouldn't even look at it until I try to change the res with xfdrake. I'll keep working at it. - Original Message - From: "Stew Benedict" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, November 04, 2002 7:39 PM Subject: Re: [Cooker-PPC] Changing display mode > > On Mon, 4 Nov 2002, Alex Horvath wrote: > > > Hi All > > > > I have a Supermac j900 running Mandrake 8.2PPC. > > > > I've got an ATI Xclaim VR (Rage II) and an Apple 17" Monitor. > > > > The current display mode is 800x600 (i think the refresh is 75). > > > > I'd like to change the display mode to 1024x768 @75 or 85, but I can't seem to do it. > > > > I figured out that X is using the /etc/X11/XF86Config-4 file for the configs, but if I add 1024x768 to the Screen section, X errors out with a signal 11. > > > > I know that the monitor and card can do 1024x768@75 because I use this on the MacOS. > > > > I've tried the default 1024x768 settings, plus my own that I generated at http://xtiming.sourceforge.net > > > > Thanks in advance!!! > > > > Hi Alan, > > I saw this earlier. It's odd that trying different resolutions would > cause a signal 11. Normally X would just exit saying it couldn't do that > resolution or fall back to a lower one. The server certainly is capable > of it, I run 1024x768 on all my machines. Sometimes if your horizontal or > vertical frequency range limit is too narrow, the X server may think it > can't achieve the desired resolution, but still it shouldn't generate a > signal 11. > > Stew Benedict > > -- > MandrakeSoft > PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3 > IRC: irc.openproject.net #cooker-ppc > Archives: http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&r=1&w=2 > > >
Re: [Cooker-PPC] Changing display mode
On Tue, 5 Nov 2002, Alex Horvath wrote: > Stew, > > I wiped out my 2+3 button mappings. > > Could you give me the config lines and the file they are from so I can get > them back ? > They are currently only done by the installer: /etc/sysctl.conf: dev.mac_hid.mouse_button_emulation = 1 dev.mac_hid.mouse_button2_keycode = 87 dev.mac_hid.mouse_button3_keycode = 88 sysctl -p will reload the settings mouse.pm in the install source has more codes, the above are F11, F12 As you found out, mousedrake will nicely wipe those settings out. Stew > Thanks, > > AH > - Original Message - > From: "Stew Benedict" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, November 05, 2002 6:37 AM > Subject: Re: [Cooker-PPC] Changing display mode > > > > > > On Mon, 4 Nov 2002, Alex Horvath wrote: > > > > > Could it have something to do with my mouse ? If I try to change it > from > > > inside X, using the control centre, the display blanks, then when it > comes > > > back, it gives me an error about IMPS2 not being a correct mode. > > > > > > Any other ideas ? > > > > IMPS2 should be valid, although in the XConfig it's written IMPS/2. > > Here's a snippet of mine, altered by using mousedrake: > > > > Section "InputDevice" > > Identifier "Mouse1" > > Driver "mouse" > > Option "Protocol" "IMPS/2" > > Option "Device" "/dev/usbmouse" > > Option "ZAxisMapping" "4 5" > > EndSection > > > > I'm using both the Powerbook trackpad and a wheeled Logitech USB mouse. > > You should be aware that mousedrake isn't PPC savvy, and will wipe out > > your 2nd, 3rd button emulations for you :(. > > > > Even a bad mouseconfig shouldn't be giving you signal 11. That's a fairly > > severe error: > > > > SIGSEGV 11 CoreInvalid memory reference > > > > You can readily eliminate the mouse from your troubleshooting by using: > > > > startx -- -allowMouseOpenFail > > > > Stew Benedict > > > > -- > > MandrakeSoft > > PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3 > > IRC: irc.openproject.net #cooker-ppc > > Archives: http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&r=1&w=2 > > > > > > Stew Benedict -- MandrakeSoft PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3 IRC: irc.openproject.net #cooker-ppc Archives: http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&r=1&w=2
Re: [Cooker-PPC] Changing display mode
Stew, I wiped out my 2+3 button mappings. Could you give me the config lines and the file they are from so I can get them back ? Thanks, AH - Original Message - From: "Stew Benedict" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Tuesday, November 05, 2002 6:37 AM Subject: Re: [Cooker-PPC] Changing display mode > > On Mon, 4 Nov 2002, Alex Horvath wrote: > > > Could it have something to do with my mouse ? If I try to change it from > > inside X, using the control centre, the display blanks, then when it comes > > back, it gives me an error about IMPS2 not being a correct mode. > > > > Any other ideas ? > > IMPS2 should be valid, although in the XConfig it's written IMPS/2. > Here's a snippet of mine, altered by using mousedrake: > > Section "InputDevice" > Identifier "Mouse1" > Driver "mouse" > Option "Protocol" "IMPS/2" > Option "Device" "/dev/usbmouse" > Option "ZAxisMapping" "4 5" > EndSection > > I'm using both the Powerbook trackpad and a wheeled Logitech USB mouse. > You should be aware that mousedrake isn't PPC savvy, and will wipe out > your 2nd, 3rd button emulations for you :(. > > Even a bad mouseconfig shouldn't be giving you signal 11. That's a fairly > severe error: > > SIGSEGV 11 CoreInvalid memory reference > > You can readily eliminate the mouse from your troubleshooting by using: > > startx -- -allowMouseOpenFail > > Stew Benedict > > -- > MandrakeSoft > PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3 > IRC: irc.openproject.net #cooker-ppc > Archives: http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&r=1&w=2 > >
Re: PPC installation problems with GeForce Video Card
On Tue, 5 Nov 2002, Patrick, Robert W (CAP, CORP) wrote: > > Does anyone have advice on installing Mandrake 8.2PPC on a dual 1Ghz > Mac? > > I have had zero success with installing and using Linux with this > system. > > The system is a Dual 1Ghz Apple (Quicksilver, I think) > > Video card is a Nvidia GeForce4 MX > > And it uses the USB sound system and the sound sticks from Harmon > Kardon. > > Also the flat panel display. > > My two biggest problems that I can as yet identify are: > > Bootstrap/ patitioning > > And video support. > > Any help would be greatly appreciated! :-) > > Thanks to all in advance. > > > > P.S. My goal would be to have a Linux only MAC. Not Dual boot... is > that possible? Or must I have a Mac partition first? > We need a few more details on what the problems are to be able to help. You can have a Linux only system, although having a Mac partition on the disk will make things easier. Stew Benedict -- MandrakeSoft PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3 IRC: irc.openproject.net #cooker-ppc Archives: http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&r=1&w=2
PPC installation problems with GeForce Video Card
Does anyone have advice on installing Mandrake 8.2PPC on a dual 1Ghz Mac? I have had zero success with installing and using Linux with this system. The system is a Dual 1Ghz Apple (Quicksilver, I think) Video card is a Nvidia GeForce4 MX And it uses the USB sound system and the sound sticks from Harmon Kardon. Also the flat panel display. My two biggest problems that I can as yet identify are: Bootstrap/ patitioning And video support. Any help would be greatly appreciated! J Thanks to all in advance. P.S. My goal would be to have a Linux only MAC. Not Dual boot… is that possible? Or must I have a Mac partition first?
Alex Horvath
Alex I too have a UMAX s900 and have had trouble with configuring my adb mouse among other things. I was wondering if I could correspond with you about configuring my machine? my E-mail address is [EMAIL PROTECTED] Thank you very much for your time Stefan --
Re: [Cooker-PPC] Changing display mode
On Mon, 4 Nov 2002, Alex Horvath wrote: > Could it have something to do with my mouse ? If I try to change it from > inside X, using the control centre, the display blanks, then when it comes > back, it gives me an error about IMPS2 not being a correct mode. > > Any other ideas ? IMPS2 should be valid, although in the XConfig it's written IMPS/2. Here's a snippet of mine, altered by using mousedrake: Section "InputDevice" Identifier "Mouse1" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/usbmouse" Option "ZAxisMapping" "4 5" EndSection I'm using both the Powerbook trackpad and a wheeled Logitech USB mouse. You should be aware that mousedrake isn't PPC savvy, and will wipe out your 2nd, 3rd button emulations for you :(. Even a bad mouseconfig shouldn't be giving you signal 11. That's a fairly severe error: SIGSEGV 11 CoreInvalid memory reference You can readily eliminate the mouse from your troubleshooting by using: startx -- -allowMouseOpenFail Stew Benedict -- MandrakeSoft PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3 IRC: irc.openproject.net #cooker-ppc Archives: http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&r=1&w=2
