Re: Still have the same problem
On Sat, 1 Dec 2001, Aaron Stechesen wrote: I think that I may try reinstalling everything but this time I will make three partitions within the first eight gigs. One of four for for OSX.1, two for Darwin, and two for Linux. The last twelve gigs I wil use for file storage. Is it possible to have my /home partition at the end of the drive, say in the last four gigs and evrything run alright? Is two gigs enough for my / and swap? That should be fine. Once the kernel is loaded, I don't think you should have any problems accessing the rest of the drive. I think the problem in is OF/yaboot. I have a similar situation with a 40GB drive on an Intel machine that doesn't care to see it properly. I use an old drive that was failing, but that I managed to mark off a small partition that was clean, and use it to boot the system. Linux had no problem with the other drive and I put the boot drive to sleep after the system is up. 2GB should be enough, depending on what you're going to install and how much swap you're going to use.. I've done a whole install, just taking the defaults, on 2GB partition, and had enough room to do things with it afterward. Stew Benedict -- MandrakeSoftOH/TN, USA http://perso.mandrakesoft.com/~sbenedict/ PPC FAQ: http://www.linux-mandrake.com/en/demos/PPC/FAQ/
Re: Still have the same problem
I just ran the chroot stuff that you told me to and then tried to boot Mandrake. All I have on screen after the Welcome to Mandrake Linux! is: boot: (to which i typed) linux Loading kernel... and then it just sits there and sits there and sits there I got this far before and I know that it will sit there until I get tired and need to turn it off.:( - Original Message - From: Stew Benedict [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, December 01, 2001 6:35 AM Subject: Re: Still have the same problem On Fri, 30 Nov 2001, Aaron Stechesen wrote: here is the yaboot.conf details: init-message=\nWelcome to Mandrake Linux!\n boot=/dev/hda7 ofboot=hd:7 delay=30 timeout=50 install=/usr/local/lib/yaboot/yaboot magicboot=/usr/local/lib/yaboot/ofboot enablecdboot enableofboot defaultos=linux default=linux novram image=hd:8,/boot/vmlinuz label=failsafe root=/dev/hda8 initrd=hd:8./boot/initrd.img append= failsafe read-only macosx=hd:6 image=hd:8,/boot/vmlinuz label=linux root=/dev/hda8 initrd=hd:8,/boot/initrd.img read-write This looks mostly OK. This line is probably just a typo?: initrd=hd:8./boot/initrd.img Note the . instead of , Did you rerun ybin while you were in the chroot? And id so did you get the boot prompt? Also did you check the Open Firmware boot-device settings? To edit in rescue you would use vi. For that I'd suggest checking google, as I'd rather not get into a vi lesson here. Coming from MacOS, vi may seem a bit strange, but it's something you can count on being present on most any unix system you sit down at. Stew Benedict -- MandrakeSoft OH/TN, USA http://perso.mandrakesoft.com/~sbenedict/ PPC FAQ: http://www.linux-mandrake.com/en/demos/PPC/FAQ/
RE: Still have the same problem
VI Basics (I'm bored, why not?): run: vi filename type: I (w/o quotes) use arrows to move up/down/left/right, same as SimpleText except W/O a mouse. when done, ESC to exit editing mode, and ZZ to save/quit, or use :q!ENTER (w/o quotes). Example: vi /mnt/disk/etc/yaboot.conf DOWN DOWN RIGHT DELETE 2 ESC ZZ Used Vi to replcae the 1st character on the third line with a 2. Saved, and quit. Hope to help. Also, you may want to install pico on your system. It's a very useful editor, with help, all. Just pico filename, and everything else is pie. H2H, Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Aaron Stechesen Sent: Saturday, December 01, 2001 8:35 AM To: [EMAIL PROTECTED] Subject: Re: Still have the same problem I just ran the chroot stuff that you told me to and then tried to boot Mandrake. All I have on screen after the Welcome to Mandrake Linux! is: boot: (to which i typed) linux Loading kernel... and then it just sits there and sits there and sits there I got this far before and I know that it will sit there until I get tired and need to turn it off.:( - Original Message - From: Stew Benedict [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, December 01, 2001 6:35 AM Subject: Re: Still have the same problem On Fri, 30 Nov 2001, Aaron Stechesen wrote: here is the yaboot.conf details: init-message=\nWelcome to Mandrake Linux!\n boot=/dev/hda7 ofboot=hd:7 delay=30 timeout=50 install=/usr/local/lib/yaboot/yaboot magicboot=/usr/local/lib/yaboot/ofboot enablecdboot enableofboot defaultos=linux default=linux novram image=hd:8,/boot/vmlinuz label=failsafe root=/dev/hda8 initrd=hd:8./boot/initrd.img append= failsafe read-only macosx=hd:6 image=hd:8,/boot/vmlinuz label=linux root=/dev/hda8 initrd=hd:8,/boot/initrd.img read-write This looks mostly OK. This line is probably just a typo?: initrd=hd:8./boot/initrd.img Note the . instead of , Did you rerun ybin while you were in the chroot? And id so did you get the boot prompt? Also did you check the Open Firmware boot-device settings? To edit in rescue you would use vi. For that I'd suggest checking google, as I'd rather not get into a vi lesson here. Coming from MacOS, vi may seem a bit strange, but it's something you can count on being present on most any unix system you sit down at. Stew Benedict -- MandrakeSoft OH/TN, USA http://perso.mandrakesoft.com/~sbenedict/ PPC FAQ: http://www.linux-mandrake.com/en/demos/PPC/FAQ/ _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
Re: Still have the same problem
Cool, thank you! - Original Message - From: Jonathan Sailor [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, December 01, 2001 11:20 AM Subject: RE: Still have the same problem VI Basics (I'm bored, why not?): run: vi filename type: I (w/o quotes) use arrows to move up/down/left/right, same as SimpleText except W/O a mouse. when done, ESC to exit editing mode, and ZZ to save/quit, or use :q!ENTER (w/o quotes). Example: vi /mnt/disk/etc/yaboot.conf DOWN DOWN RIGHT DELETE 2 ESC ZZ Used Vi to replcae the 1st character on the third line with a 2. Saved, and quit. Hope to help. Also, you may want to install pico on your system. It's a very useful editor, with help, all. Just pico filename, and everything else is pie. H2H, Jonathan -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Aaron Stechesen Sent: Saturday, December 01, 2001 8:35 AM To: [EMAIL PROTECTED] Subject: Re: Still have the same problem I just ran the chroot stuff that you told me to and then tried to boot Mandrake. All I have on screen after the Welcome to Mandrake Linux! is: boot: (to which i typed) linux Loading kernel... and then it just sits there and sits there and sits there I got this far before and I know that it will sit there until I get tired and need to turn it off.:( - Original Message - From: Stew Benedict [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, December 01, 2001 6:35 AM Subject: Re: Still have the same problem On Fri, 30 Nov 2001, Aaron Stechesen wrote: here is the yaboot.conf details: init-message=\nWelcome to Mandrake Linux!\n boot=/dev/hda7 ofboot=hd:7 delay=30 timeout=50 install=/usr/local/lib/yaboot/yaboot magicboot=/usr/local/lib/yaboot/ofboot enablecdboot enableofboot defaultos=linux default=linux novram image=hd:8,/boot/vmlinuz label=failsafe root=/dev/hda8 initrd=hd:8./boot/initrd.img append= failsafe read-only macosx=hd:6 image=hd:8,/boot/vmlinuz label=linux root=/dev/hda8 initrd=hd:8,/boot/initrd.img read-write This looks mostly OK. This line is probably just a typo?: initrd=hd:8./boot/initrd.img Note the . instead of , Did you rerun ybin while you were in the chroot? And id so did you get the boot prompt? Also did you check the Open Firmware boot-device settings? To edit in rescue you would use vi. For that I'd suggest checking google, as I'd rather not get into a vi lesson here. Coming from MacOS, vi may seem a bit strange, but it's something you can count on being present on most any unix system you sit down at. Stew Benedict -- MandrakeSoft OH/TN, USA http://perso.mandrakesoft.com/~sbenedict/ PPC FAQ: http://www.linux-mandrake.com/en/demos/PPC/FAQ/ _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com
Re: Still have the same problem
- Original Message - From: Stew Benedict [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, December 01, 2001 11:15 AM Subject: Re: Still have the same problem On Sat, 1 Dec 2001, Aaron Stechesen wrote: I just ran the chroot stuff that you told me to and then tried to boot Mandrake. All I have on screen after the Welcome to Mandrake Linux! is: boot: (to which i typed) linux Loading kernel... and then it just sits there and sits there and sits there I got this far before and I know that it will sit there until I get tired and need to turn it off.:( try hd:8,/boot/vmlinuz or hd:8,/boot/vmlinuz-2.4.4-6.2mdk can you forward: ls -l /mnt/disk/boot when you are in rescue mode with yoyr partition mounted The bootloader setup seems OK, but perhaps your kernel is missing or corrupted. This is a fresh install of 8.0? Yes sir it is. Installed it last night and this is the same result as the countless time before:( Stew Benedict -- MandrakeSoft OH/TN, USA http://perso.mandrakesoft.com/~sbenedict/ PPC FAQ: http://www.linux-mandrake.com/en/demos/PPC/FAQ/
Re: Still have the same problem
result of ls -l /mnt/disk/boot: total 3672 -rw-r--r-- 1 rootroot 455451 Jun 28 01:32 Sysytem.map-2.4.4-6.2mdk -rw-r--r-- 1 rootroot 28844 Jun 28 01:32 config-2.4.4-6.2mdk -rw-r--r-- 1 rootroot 521397 Nov 30 07:12 initrd-2.4.4-6.2mdk.img lrwxrwxrwx1 rootroot 23 Nov 30 07:12 initrd.img - initrd-2.4.4-6.2mdk.img lrwxrwxrwx1 rootroot 14 Nov 30 07:12 kernel.h - kernel.h-2.4.4 -rw-r--r-- 1 rootroot441 Nov 30 07:12 kernel.h-2.4.4 -rw-r--r-- 1 rootroot0 Nov 30 07:12 mac-us.ext.klt -rw-r--r-- 1 rootroot130 Nov 30 07:12 message lrwxrwxrwx1 rootroot 20 Nov 30 07:12 vmlinuz - vmlinuz-2.4.4-6.2mdk* -rwxr-xr-x 1 rootroot 2720888 Nov 30 07:12 vmlinuz-2.4.4-6.2mdk* the initrd.img in line four, the kernel.h in the next line, and vmlinuz in the second last line are in blue letters. the vmlinuz-2.4.4-6.2mdk in the last two lines are in green letters (not the hash marks though). - Original Message - From: Stew Benedict [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, December 01, 2001 11:15 AM Subject: Re: Still have the same problem On Sat, 1 Dec 2001, Aaron Stechesen wrote: I just ran the chroot stuff that you told me to and then tried to boot Mandrake. All I have on screen after the Welcome to Mandrake Linux! is: boot: (to which i typed) linux Loading kernel... and then it just sits there and sits there and sits there I got this far before and I know that it will sit there until I get tired and need to turn it off.:( try hd:8,/boot/vmlinuz or hd:8,/boot/vmlinuz-2.4.4-6.2mdk can you forward: ls -l /mnt/disk/boot when you are in rescue mode with yoyr partition mounted The bootloader setup seems OK, but perhaps your kernel is missing or corrupted. This is a fresh install of 8.0? Stew Benedict -- MandrakeSoft OH/TN, USA http://perso.mandrakesoft.com/~sbenedict/ PPC FAQ: http://www.linux-mandrake.com/en/demos/PPC/FAQ/
Re: Still have the same problem
On Sat, 1 Dec 2001, Aaron Stechesen wrote: try hd:8,/boot/vmlinuz or hd:8,/boot/vmlinuz-2.4.4-6.2mdk where would i put this? The initrd= line? Should I replace the , 's with . 's on the initrd= and image= lines? type it at the boot: prompt Stew Benedict -- MandrakeSoftOH/TN, USA http://perso.mandrakesoft.com/~sbenedict/ PPC FAQ: http://www.linux-mandrake.com/en/demos/PPC/FAQ/
Re: Still have the same problem
Thanks I'll try. Do you think that this could be one of those instances where the combination of the size of my hard drive and the OF make it impossible to boot past the 8 gig barrier? - Original Message - From: Stew Benedict [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, December 01, 2001 3:27 PM Subject: Re: Still have the same problem On Sat, 1 Dec 2001, Aaron Stechesen wrote: try hd:8,/boot/vmlinuz or hd:8,/boot/vmlinuz-2.4.4-6.2mdk where would i put this? The initrd= line? Should I replace the , 's with . 's on the initrd= and image= lines? type it at the boot: prompt Stew Benedict -- MandrakeSoft OH/TN, USA http://perso.mandrakesoft.com/~sbenedict/ PPC FAQ: http://www.linux-mandrake.com/en/demos/PPC/FAQ/
RE: Still have the same problem
Info on bootloader:
Open firmware booting is weird. First and foremost, there are actually three
files involved in a yaboot configuration. First is, obviously, the kernel.
Second and third are OFBOOT.B and yaboot. OFBOOT.B is some cryptic Forth
commands that instruct Open Firware to display the Mac, Linux, etc. Once an
option is selected, it chainloads to Mac, the CD, or loads Linux. To load
Linux, it calls yaboot. Yaboot is actual binary which does the loading of
Linux itself. Analogy for x86 users:
+-+
| Grub |
+-+
/ |'-\
++ ++ +-+
| {hda8} | | {hda9} | | {hda10} |
++ ++ +-+
|
++
| Linux |
++
In this, Grub is OFBOOT.B, hda8 and 9 are Mac and Darwin, and hda10 would be
Lilo in x86, but is yaboot in ppc. Linux is Linux.
H2H -Jonathan
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Aaron Stechesen
Sent: Saturday, December 01, 2001 8:27 AM
To: [EMAIL PROTECTED]
Subject: Re: Still have the same problem
- Original Message -
From: Stew Benedict [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, December 01, 2001 6:35 AM
Subject: Re: Still have the same problem
On Fri, 30 Nov 2001, Aaron Stechesen wrote:
here is the yaboot.conf details:
init-message=\nWelcome to Mandrake Linux!\n
boot=/dev/hda7
ofboot=hd:7
delay=30
timeout=50
install=/usr/local/lib/yaboot/yaboot
magicboot=/usr/local/lib/yaboot/ofboot
enablecdboot
enableofboot
defaultos=linux
default=linux
novram
image=hd:8,/boot/vmlinuz
label=failsafe
root=/dev/hda8
initrd=hd:8./boot/initrd.img
append= failsafe
read-only
macosx=hd:6
image=hd:8,/boot/vmlinuz
label=linux
root=/dev/hda8
initrd=hd:8,/boot/initrd.img
read-write
This looks mostly OK. This line is probably just a typo?:
initrd=hd:8./boot/initrd.img
Note the . instead of ,
No. I t is. in fact initrd=hd:8,/boot/initrd.img
Did you rerun ybin while you were in the chroot?
Not yet.
And id so did you get the
boot prompt?Also did you check the Open Firmware boot-device settings?
The setting is setenv boot-device hd:7,\\:tbxi
and the bootloader starts just fine. I boot into OS X, Firmware and CDROM
without troubles.
To edit in rescue you would use vi. For that I'd suggest checking google,
as I'd rather not get into a vi lesson here. Coming from MacOS, vi may
seem a bit strange, but it's something you can count on being present on
most any unix system you sit down at.
Just how would I launch it if I need to. Do I even need to? does the ,
need to be .?
Thanks alot for your assistance by the way. There is a serious lack of help
on the mandrake user site and not a heck of alot of info tothis problem
elsewhere.
Stew Benedict
--
MandrakeSoft OH/TN, USA http://perso.mandrakesoft.com/~sbenedict/
PPC FAQ: http://www.linux-mandrake.com/en/demos/PPC/FAQ/
_
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Re: Still have the same problem
On Sat, 1 Dec 2001, Aaron Stechesen wrote: Thanks I'll try. Do you think that this could be one of those instances where the combination of the size of my hard drive and the OF make it impossible to boot past the 8 gig barrier? That's entirely possible and something I overlooked. I dropped a larger drive in my iMac and recall hitting a scenario in one of my tests where it would not boot. I think Ben or someone mentioned an issue with OF on the older machines that may be the limiting factor here. I don't suppose you have a way of getting /boot farther down in the partition table? Alternately, you could put the kernel on an HFS partition and boot it. Once the kernel is up I don't think it will matter. I hate to mix OS's like that, but it beats not booting at all. Stew Benedict -- MandrakeSoftOH/TN, USA http://perso.mandrakesoft.com/~sbenedict/ PPC FAQ: http://www.linux-mandrake.com/en/demos/PPC/FAQ/
Re: Still have the same problem
I think that I may try reinstalling everything but this time I will make three partitions within the first eight gigs. One of four for for OSX.1, two for Darwin, and two for Linux. The last twelve gigs I wil use for file storage. Is it possible to have my /home partition at the end of the drive, say in the last four gigs and evrything run alright? Is two gigs enough for my / and swap? - Original Message - From: Stew Benedict [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Saturday, December 01, 2001 7:06 PM Subject: Re: Still have the same problem On Sat, 1 Dec 2001, Aaron Stechesen wrote: Thanks I'll try. Do you think that this could be one of those instances where the combination of the size of my hard drive and the OF make it impossible to boot past the 8 gig barrier? That's entirely possible and something I overlooked. I dropped a larger drive in my iMac and recall hitting a scenario in one of my tests where it would not boot. I think Ben or someone mentioned an issue with OF on the older machines that may be the limiting factor here. I don't suppose you have a way of getting /boot farther down in the partition table? Alternately, you could put the kernel on an HFS partition and boot it. Once the kernel is up I don't think it will matter. I hate to mix OS's like that, but it beats not booting at all. Stew Benedict -- MandrakeSoft OH/TN, USA http://perso.mandrakesoft.com/~sbenedict/ PPC FAQ: http://www.linux-mandrake.com/en/demos/PPC/FAQ/
Re: Still have the same problem
On Fri, 30 Nov 2001, Aaron Stechesen wrote: last night I posted that I was unable to boot Linux after installing. I still have the same trouble and even through rescue I can't boot! I am very new to this type of trouble when you reply with suggestions please be specific with the commands that I should be typing (/ is on hda8 and the bootloader is on 7), and what I should suspect, change and where i should be looking. Programs I should use if I need to alter or build anything. Thanks in advance! Aaron Boot CD iin rescue mode: Hold down C at boot Type rescue at yaboot boot prompt Mount Linux partion on /mnt/disk mount /dev/hda8 /mnt/disk Check your yaboot.conf at /mnt/disk/etc/yaboot.conf (send it to the list if you like for further examination) If you think it looks good, re-run ybin in a chroot environment: cd / chroot /mnt/disk /sbin/ybin -v exit Reboot: reboot You might also want to check open firmware to see if the boot-device is set properly. The installer should have given you a message telling what needed to be done (did you write down the cryptic commands?) Command(Apple)-Option-O-F at boot printenv boot-device in your case should be hd:7,\\:tbxi If it's not: setenv boot-device hd:7,\\:tbxi shut-down Re-power the machine and see what happens HTH, Stew Benedict -- MandrakeSoftOH/TN, USA http://perso.mandrakesoft.com/~sbenedict/ PPC FAQ: http://www.linux-mandrake.com/en/demos/PPC/FAQ/
Re: Still have the same problem
- Original Message - From: Stew Benedict [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, November 30, 2001 6:21 AM Subject: Re: Still have the same problem On Fri, 30 Nov 2001, Aaron Stechesen wrote: last night I posted that I was unable to boot Linux after installing. I still have the same trouble and even through rescue I can't boot! I am very new to this type of trouble when you reply with suggestions please be specific with the commands that I should be typing (/ is on hda8 and the bootloader is on 7), and what I should suspect, change and where i should be looking. Programs I should use if I need to alter or build anything. Thanks in advance! Aaron Boot CD iin rescue mode: Hold down C at boot Type rescue at yaboot boot prompt Mount Linux partion on /mnt/disk mount /dev/hda8 /mnt/disk Check your yaboot.conf at /mnt/disk/etc/yaboot.conf (send it to the list if you like for further examination) when i get to here and type in the string i get the error bash: /mnt/disk/etc/yaboot.conf:permission denied I am root so what is going on here? Suggestions welcome. Again be specific. Thanks. If you think it looks good, re-run ybin in a chroot environment: cd / chroot /mnt/disk /sbin/ybin -v exit Reboot: reboot You might also want to check open firmware to see if the boot-device is set properly. The installer should have given you a message telling what needed to be done (did you write down the cryptic commands?) Command(Apple)-Option-O-F at boot printenv boot-device in your case should be hd:7,\\:tbxi If it's not: setenv boot-device hd:7,\\:tbxi shut-down Re-power the machine and see what happens HTH, Stew Benedict -- MandrakeSoft OH/TN, USA http://perso.mandrakesoft.com/~sbenedict/ PPC FAQ: http://www.linux-mandrake.com/en/demos/PPC/FAQ/
Re: Still have the same problem
On Fri, 30 Nov 2001, Aaron Stechesen wrote: - Original Message - From: Stew Benedict [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, November 30, 2001 6:21 AM Subject: Re: Still have the same problem On Fri, 30 Nov 2001, Aaron Stechesen wrote: last night I posted that I was unable to boot Linux after installing. I still have the same trouble and even through rescue I can't boot! I am very new to this type of trouble when you reply with suggestions please be specific with the commands that I should be typing (/ is on hda8 and the bootloader is on 7), and what I should suspect, change and where i should be looking. Programs I should use if I need to alter or build anything. Thanks in advance! Aaron Boot CD iin rescue mode: Hold down C at boot Type rescue at yaboot boot prompt Mount Linux partion on /mnt/disk mount /dev/hda8 /mnt/disk Check your yaboot.conf at /mnt/disk/etc/yaboot.conf (send it to the list if you like for further examination) when i get to here and type in the string i get the error bash: /mnt/disk/etc/yaboot.conf:permission denied I am root so what is going on here? Suggestions welcome. Again be specific. Thanks. Oops, sorry - you are really new to this ;^) If you just type the name, it is going to try to run it, which won't happen. It's just a text config file, so you want to view it: cat /mnt/disk/etc/yaboot.conf less /mnt/disk/etc/yaboot.conf more /mnt/disk/etc/yaboot.conf are a few ways Stew Benedict -- MandrakeSoftOH/TN, USA http://perso.mandrakesoft.com/~sbenedict/ PPC FAQ: http://www.linux-mandrake.com/en/demos/PPC/FAQ/
Re: Still have the same problem
thanks! yes I am very new to commands, i am slowly learning though. you can thank apple for my idiocy as they always made everything so darn easy:) - Original Message - From: Stew Benedict [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, November 30, 2001 6:12 PM Subject: Re: Still have the same problem On Fri, 30 Nov 2001, Aaron Stechesen wrote: - Original Message - From: Stew Benedict [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, November 30, 2001 6:21 AM Subject: Re: Still have the same problem On Fri, 30 Nov 2001, Aaron Stechesen wrote: last night I posted that I was unable to boot Linux after installing. I still have the same trouble and even through rescue I can't boot! I am very new to this type of trouble when you reply with suggestions please be specific with the commands that I should be typing (/ is on hda8 and the bootloader is on 7), and what I should suspect, change and where i should be looking. Programs I should use if I need to alter or build anything. Thanks in advance! Aaron Boot CD iin rescue mode: Hold down C at boot Type rescue at yaboot boot prompt Mount Linux partion on /mnt/disk mount /dev/hda8 /mnt/disk Check your yaboot.conf at /mnt/disk/etc/yaboot.conf (send it to the list if you like for further examination) when i get to here and type in the string i get the error bash: /mnt/disk/etc/yaboot.conf:permission denied I am root so what is going on here? Suggestions welcome. Again be specific. Thanks. Oops, sorry - you are really new to this ;^) If you just type the name, it is going to try to run it, which won't happen. It's just a text config file, so you want to view it: cat /mnt/disk/etc/yaboot.conf less /mnt/disk/etc/yaboot.conf more /mnt/disk/etc/yaboot.conf are a few ways Stew Benedict -- MandrakeSoft OH/TN, USA http://perso.mandrakesoft.com/~sbenedict/ PPC FAQ: http://www.linux-mandrake.com/en/demos/PPC/FAQ/
Re: Still have the same problem
here is the yaboot.conf details: init-message=\nWelcome to Mandrake Linux!\n boot=/dev/hda7 ofboot=hd:7 delay=30 timeout=50 install=/usr/local/lib/yaboot/yaboot magicboot=/usr/local/lib/yaboot/ofboot enablecdboot enableofboot defaultos=linux default=linux novram image=hd:8,/boot/vmlinuz label=failsafe root=/dev/hda8 initrd=hd:8./boot/initrd.img append= failsafe read-only macosx=hd:6 image=hd:8,/boot/vmlinuz label=linux root=/dev/hda8 initrd=hd:8,/boot/initrd.img read-write Anything you can suggest would be welcome. Also, how do I erase/edit line in this file in rescue mode? Thanks! - Original Message - From: Stew Benedict [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, November 30, 2001 6:12 PM Subject: Re: Still have the same problem On Fri, 30 Nov 2001, Aaron Stechesen wrote: - Original Message - From: Stew Benedict [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, November 30, 2001 6:21 AM Subject: Re: Still have the same problem On Fri, 30 Nov 2001, Aaron Stechesen wrote: last night I posted that I was unable to boot Linux after installing. I still have the same trouble and even through rescue I can't boot! I am very new to this type of trouble when you reply with suggestions please be specific with the commands that I should be typing (/ is on hda8 and the bootloader is on 7), and what I should suspect, change and where i should be looking. Programs I should use if I need to alter or build anything. Thanks in advance! Aaron Boot CD iin rescue mode: Hold down C at boot Type rescue at yaboot boot prompt Mount Linux partion on /mnt/disk mount /dev/hda8 /mnt/disk Check your yaboot.conf at /mnt/disk/etc/yaboot.conf (send it to the list if you like for further examination) when i get to here and type in the string i get the error bash: /mnt/disk/etc/yaboot.conf:permission denied I am root so what is going on here? Suggestions welcome. Again be specific. Thanks. Oops, sorry - you are really new to this ;^) If you just type the name, it is going to try to run it, which won't happen. It's just a text config file, so you want to view it: cat /mnt/disk/etc/yaboot.conf less /mnt/disk/etc/yaboot.conf more /mnt/disk/etc/yaboot.conf are a few ways Stew Benedict -- MandrakeSoft OH/TN, USA http://perso.mandrakesoft.com/~sbenedict/ PPC FAQ: http://www.linux-mandrake.com/en/demos/PPC/FAQ/
