Re: Installation crashed, kernel exception
On Sat, 21 Dec 2002, Brent Hasty wrote: > I mirrored ftp.sunet.se lat night seem to be much more complete, 2.5 GB > > I have not run gendistrib on these yet, what is the proper procedure for doing > so? > There is a README in the same place you got the ISO that goes through the whole process. Stew Benedict -- MandrakeSoft PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3 IRC: irc.openproject.net #cooker-ppc Archives: http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&r=1&w=2
Re: Installation crashed, kernel exception
On Saturday 21 December 2002 02:56 am, Stew Benedict wrote: > On Fri, 20 Dec 2002, Brent Hasty wrote: > > On Friday 20 December 2002 07:00 pm, Stew Benedict wrote: > > I copied the the key files from cd to my ppc directory I will be doing > > the ftp install from, this time the ftp worked, launched the graphical > > installer, progressed to the point of installing packages then ran into > > this... > > > > When statring to load the packages, the installer is unable to locate > > glibc-2.2.5-20mdk.ppc > > > > I checked in the directory I mirrored (about 800 MB of rpms) and that > > specific file is not there, though there are a couple of glibc-lsb rpm > > files. > > > > I just checked rpmfind.net and my directory is a duplicate of theres, no > > glibc-2.2.5-20mdk.ppc there either. > > > > again the directory on rpm find I mirrored is > > /linux/Mandrake-devel/cooker/ppc > > > > Do I need to get the SRPMS? > > No, you don't need SRPMS, but you do need a LOT more RPMS. > > [stew@rs6000 RPMS]$ du -h . > 2.3G. > > And you definitely want glibc. 800MB is nowhere near a full respository of > the typical 3 CDs of main. > > When you run gendistrib (you did do this right?), look at the output. You > need to decide whether the messages it gives (if any) are important. > > PS: you don't need to CC me - I read the list and I get LOTS of mail > already, I don't need two copies of everything. > > Stew Benedict I mirrored ftp.sunet.se lat night seem to be much more complete, 2.5 GB I have not run gendistrib on these yet, what is the proper procedure for doing so? -- 8:58am up 14:29, 5 users, load average: 0.40, 0.41, 0.44
Re: Installation crashed, kernel exception
On Fri, 20 Dec 2002, Brent Hasty wrote: > On Friday 20 December 2002 07:00 pm, Stew Benedict wrote: > I copied the the key files from cd to my ppc directory I will be doing the ftp > install from, this time the ftp worked, launched the graphical installer, > progressed to the point of installing packages then ran into this... > > When statring to load the packages, the installer is unable to locate > glibc-2.2.5-20mdk.ppc > > I checked in the directory I mirrored (about 800 MB of rpms) and that specific > file is not there, though there are a couple of glibc-lsb rpm files. > > I just checked rpmfind.net and my directory is a duplicate of theres, no > glibc-2.2.5-20mdk.ppc there either. > > again the directory on rpm find I mirrored is > /linux/Mandrake-devel/cooker/ppc > > Do I need to get the SRPMS? > No, you don't need SRPMS, but you do need a LOT more RPMS. [stew@rs6000 RPMS]$ du -h . 2.3G. And you definitely want glibc. 800MB is nowhere near a full respository of the typical 3 CDs of main. When you run gendistrib (you did do this right?), look at the output. You need to decide whether the messages it gives (if any) are important. PS: you don't need to CC me - I read the list and I get LOTS of mail already, I don't need two copies of everything. Stew Benedict -- MandrakeSoft PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3 IRC: irc.openproject.net #cooker-ppc Archives: http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&r=1&w=2
Re: Installation crashed, kernel exception
On Friday 20 December 2002 07:00 pm, Stew Benedict wrote: I copied the the key files from cd to my ppc directory I will be doing the ftp install from, this time the ftp worked, launched the graphical installer, progressed to the point of installing packages then ran into this... When statring to load the packages, the installer is unable to locate glibc-2.2.5-20mdk.ppc I checked in the directory I mirrored (about 800 MB of rpms) and that specific file is not there, though there are a couple of glibc-lsb rpm files. I just checked rpmfind.net and my directory is a duplicate of theres, no glibc-2.2.5-20mdk.ppc there either. again the directory on rpm find I mirrored is /linux/Mandrake-devel/cooker/ppc Do I need to get the SRPMS? > On Fri, 20 Dec 2002, Brent Hasty wrote: > > On Thursday 19 December 2002 03:12 pm, Brent Hasty wrote: > > A continuing saga > > > > What is the proper procedure for using the 9.x-ppc-cooker-install-2.iso > > with the mirrored /linux/Mandrake-devel/cooker/ppc on my local network? > > > > I have set up bootX, I have the mandrake install directory on my Mac OS > > 9.1 desktop, therein i have the install mandrake ppc which I can click > > on, I specify all.gz, and set the ramdisk to 3400. > > > > the wallstreet then exits Mac os, the cd spins up and the system begins > > to boot. > > > > the first menue I get to asks about the medium: > > nfs > > ftp > > cdrom > > hard drive > > > > When I select cdrom I can get as far as package installation with a nice > > 9.0 style installation menue, there it freaks out because at under 200 > > mb, the cd obviously does not contain very many packages. > > > > When I select ftp i run into the problem discussed below. > > > > what is my procedural error? > > You don't need to CC me. I follow the list. Although CD is offered, as > it's a stock install, it's not a true option with this pre-beta ISO. > It doesn't sound to me like you're doing anything wrong prodedurally. > If stage2 loads successfully from CD, but not from you network, I would > next suspect corruption at the network source. > > Stew Benedict -- 7:43pm up 1:14, 4 users, load average: 0.01, 0.02, 0.00
Re: Installation crashed, kernel exception
On Fri, 20 Dec 2002, Brent Hasty wrote: > On Thursday 19 December 2002 03:12 pm, Brent Hasty wrote: > A continuing saga > > What is the proper procedure for using the 9.x-ppc-cooker-install-2.iso with > the mirrored /linux/Mandrake-devel/cooker/ppc on my local network? > > I have set up bootX, I have the mandrake install directory on my Mac OS 9.1 > desktop, therein i have the install mandrake ppc which I can click on, I > specify all.gz, and set the ramdisk to 3400. > > the wallstreet then exits Mac os, the cd spins up and the system begins to > boot. > > the first menue I get to asks about the medium: > nfs > ftp > cdrom > hard drive > > When I select cdrom I can get as far as package installation with a nice 9.0 > style installation menue, there it freaks out because at under 200 mb, the cd > obviously does not contain very many packages. > > When I select ftp i run into the problem discussed below. > > what is my procedural error? > You don't need to CC me. I follow the list. Although CD is offered, as it's a stock install, it's not a true option with this pre-beta ISO. It doesn't sound to me like you're doing anything wrong prodedurally. If stage2 loads successfully from CD, but not from you network, I would next suspect corruption at the network source. Stew Benedict -- MandrakeSoft PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3 IRC: irc.openproject.net #cooker-ppc Archives: http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&r=1&w=2
Re: Installation crashed, kernel exception
On Thursday 19 December 2002 03:12 pm, Brent Hasty wrote: A continuing saga What is the proper procedure for using the 9.x-ppc-cooker-install-2.iso with the mirrored /linux/Mandrake-devel/cooker/ppc on my local network? I have set up bootX, I have the mandrake install directory on my Mac OS 9.1 desktop, therein i have the install mandrake ppc which I can click on, I specify all.gz, and set the ramdisk to 3400. the wallstreet then exits Mac os, the cd spins up and the system begins to boot. the first menue I get to asks about the medium: nfs ftp cdrom hard drive When I select cdrom I can get as far as package installation with a nice 9.0 style installation menue, there it freaks out because at under 200 mb, the cd obviously does not contain very many packages. When I select ftp i run into the problem discussed below. what is my procedural error? > Using the 9.x-ppc-cooker-install-2.iso, about 200 mb, and ftp to a server > containging /linux/Mandrake-devel/cooker/ppc on my local network. > > Following the instructions, I setup bootX and began installation on my > powerbook wallstreet I. > > Installation procedes, it doesnot detect the builtin lan on this G3, I > specifi the kernel module and setup static ip, the network initalized, > specified ftp as the source, directed it to the proper location and it > promptly began the download of the mdkinst_stage2.bz2, the progress bar > gets to about 99% complete > then I get an > > Oops: Exception in kernel mode, sig: 4 > and a bunch of other stuff > > install exited abnormally :-( -- received signal 4 > you may safely reboot. > > Any clues whats crashing the install? -- 6:32pm up 3 min, 3 users, load average: 0.63, 0.45, 0.18
Re: Installation crashed, kernel exception
On Thursday 19 December 2002 03:24 pm, Stew Benedict wrote: > On Thu, 19 Dec 2002, Brent Hasty wrote: > > Using the 9.x-ppc-cooker-install-2.iso, about 200 mb, and ftp to a server > > containging /linux/Mandrake-devel/cooker/ppc on my local network. > > > > Following the instructions, I setup bootX and began installation on my > > powerbook wallstreet I. > > > > Installation procedes, it doesnot detect the builtin lan on this G3, I > > specifi the kernel module and setup static ip, the network initalized, > > specified ftp as the source, directed it to the proper location and it > > promptly began the download of the mdkinst_stage2.bz2, the progress bar > > gets to about 99% complete > > then I get an > > > > Oops: Exception in kernel mode, sig: 4 > > and a bunch of other stuff > > > > install exited abnormally :-( -- received signal 4 > > you may safely reboot. > > You set ramdisk_size=34000? > Stage1 never does detect the Mac ethernet adapters automagically. > > Stew Benedict yes I did set the ramdisk size to 34000 the system is left completly unresponsive, I end up pulling power and battery to reboot. I cannot ctrl alt F key to see any of the other comments that print to screen after the lock up -- 6:21pm up 21:24, 9 users, load average: 0.09, 0.04, 0.01
Re: Installation crashed, kernel exception
On Thu, 19 Dec 2002, Brent Hasty wrote: > Using the 9.x-ppc-cooker-install-2.iso, about 200 mb, and ftp to a server > containging /linux/Mandrake-devel/cooker/ppc on my local network. > > Following the instructions, I setup bootX and began installation on my > powerbook wallstreet I. > > Installation procedes, it doesnot detect the builtin lan on this G3, I specifi > the kernel module and setup static ip, the network initalized, specified ftp > as the source, directed it to the proper location and it promptly began the > download of the mdkinst_stage2.bz2, the progress bar gets to about 99% > complete > then I get an > > Oops: Exception in kernel mode, sig: 4 > and a bunch of other stuff > > install exited abnormally :-( -- received signal 4 > you may safely reboot. > You set ramdisk_size=34000? Stage1 never does detect the Mac ethernet adapters automagically. Stew Benedict -- MandrakeSoft PPC FAQ: http://www.linux-mandrake.com/en/ppcFAQ.php3 IRC: irc.openproject.net #cooker-ppc Archives: http://marc.theaimsgroup.com/?l=mandrake-cooker-ppc&r=1&w=2