Re: setup-x86_64.exe does not start in win10 20H2
On 2021-12-10 13:19, Kutty, Rejeesh wrote: Renamed that DLL -- same behavior, and same access violation in WinDbg. Killed all Beyond Trust Services/Tasks -- same behavior. You will probably need to restart Windows after any changes in order to unload or reload DLLs and associated data. Does WinDBG still show the DLL loaded? > No it didn't, but it reported access violation after RPCRT4.dll. > (This is the RPC API, as per google). Many of these apps have difficulty handling dynamic modification, cleanly removing themselves from the call or message chains they insert themselves into, transparently passing along arbitrary calls, data, events, or messages, especially when application code is multithreaded and reentrant using mutexes and waits. Beyond Trust is on the Cygwin Big List of Dodgy Apps: poorly written (often so-called "anti-malware", "anti-virus", or "security") software that monitors, logs, blocks, and/or interferes with normal operation of many applications, with effects sometimes indistinguishable from malware, and known to prevent Cygwin working properly; see: https://cygwin.com/faq/faq.html#faq.using.bloda Beyond Trust has caused problems because its certs became outdated unless you kept the product and its certs updated. Try updating the product and check its certs are up to date in the cert store. If that fails you may need to raise a case with the product vendor regarding Cygwin 64; especially useful to mention: https://www.cygwin.com/faq.html#faq.api.fork -- Take care. Thanks, Brian Inglis, Calgary, Alberta, Canada This email may be disturbing to some readers as it contains too much technical detail. Reader discretion is advised. [Data in binary units and prefixes, physical quantities in SI.] -- Problem reports: https://cygwin.com/problems.html FAQ: https://cygwin.com/faq/ Documentation:https://cygwin.com/docs.html Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple
RE: setup-x86_64.exe does not start in win10 20H2
No it didn't, but it reported access violation after RPCRT4.dll. (This is the RPC API, as per google). -Original Message- From: Lavrentiev, Anton (NIH/NLM/NCBI) [C] Sent: Friday, December 10, 2021 3:17 PM To: Kutty, Rejeesh ; cygwin@cygwin.com Subject: RE: setup-x86_64.exe does not start in win10 20H2 [External] > Renamed that DLL -- same behavior, and same access violation in WinDbg. > Killed all Beyond Trust Services/Tasks -- same behavior. Does WinDBG still show the DLL loaded? Anton Lavrentiev Contractor NIH/NLM/NCBI -- Problem reports: https://cygwin.com/problems.html FAQ: https://cygwin.com/faq/ Documentation:https://cygwin.com/docs.html Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple
RE: setup-x86_64.exe does not start in win10 20H2
> Renamed that DLL -- same behavior, and same access violation in WinDbg. > Killed all Beyond Trust Services/Tasks -- same behavior. Does WinDBG still show the DLL loaded? Anton Lavrentiev Contractor NIH/NLM/NCBI -- Problem reports: https://cygwin.com/problems.html FAQ: https://cygwin.com/faq/ Documentation:https://cygwin.com/docs.html Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple
RE: setup-x86_64.exe does not start in win10 20H2
I tried two things (though may not make sense). Renamed that DLL -- same behavior, and same access violation in WinDbg. Killed all Beyond Trust Services/Tasks -- same behavior. -Original Message- From: Cygwin On Behalf Of Ken Brown Sent: Friday, December 10, 2021 1:29 PM To: cygwin@cygwin.com Subject: Re: setup-x86_64.exe does not start in win10 20H2 [External] On 12/10/2021 12:12 PM, Kutty, Rejeesh wrote: > Google says it is part of the Beyond Trust stuff, for security? > I couldn't find anything that tells me how to disable it. > Is this DLL the problem? Could be. Is Beyond Trust something that you have control over? Can you uninstall it, or temporarily suspend it, or tell it to exclude certain directories? Ken -- Problem reports: https://urldefense.com/v3/__https://cygwin.com/problems.html__;!!A3Ni8CS0y2Y!svGaMBRZaWA6cka50TBFP2PYTAVYdIG7Pi8yVgvvn_3Up9m8v_SPOmZkY2mLWW7n9z8$ FAQ: https://urldefense.com/v3/__https://cygwin.com/faq/__;!!A3Ni8CS0y2Y!svGaMBRZaWA6cka50TBFP2PYTAVYdIG7Pi8yVgvvn_3Up9m8v_SPOmZkY2mLuvozMME$ Documentation: https://urldefense.com/v3/__https://cygwin.com/docs.html__;!!A3Ni8CS0y2Y!svGaMBRZaWA6cka50TBFP2PYTAVYdIG7Pi8yVgvvn_3Up9m8v_SPOmZkY2mLJd1xOEo$ Unsubscribe info: https://urldefense.com/v3/__https://cygwin.com/ml/*unsubscribe-simple__;Iw!!A3Ni8CS0y2Y!svGaMBRZaWA6cka50TBFP2PYTAVYdIG7Pi8yVgvvn_3Up9m8v_SPOmZkY2mL0sP5jXE$ -- Problem reports: https://cygwin.com/problems.html FAQ: https://cygwin.com/faq/ Documentation:https://cygwin.com/docs.html Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple
Re: setup-x86_64.exe does not start in win10 20H2
On 12/10/2021 12:12 PM, Kutty, Rejeesh wrote: Google says it is part of the Beyond Trust stuff, for security? I couldn't find anything that tells me how to disable it. Is this DLL the problem? Could be. Is Beyond Trust something that you have control over? Can you uninstall it, or temporarily suspend it, or tell it to exclude certain directories? Ken -- Problem reports: https://cygwin.com/problems.html FAQ: https://cygwin.com/faq/ Documentation:https://cygwin.com/docs.html Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple
RE: setup-x86_64.exe does not start in win10 20H2
Google says it is part of the Beyond Trust stuff, for security? I couldn't find anything that tells me how to disable it. Is this DLL the problem? -Original Message- From: Cygwin On Behalf Of Ken Brown Sent: Friday, December 10, 2021 11:45 AM To: cygwin@cygwin.com Subject: Re: setup-x86_64.exe does not start in win10 20H2 [External] On 12/10/2021 9:39 AM, Kutty, Rejeesh wrote: > I can't launch setup-x86_64.exe, but setup-x86 runs fine. [...] > ModLoad: 7ffd`4371 7ffd`4374a000 > C:\WINDOWS\SYSTEM32\privman64.dll What is this and why is it being loaded? Ken -- Problem reports: https://urldefense.com/v3/__https://cygwin.com/problems.html__;!!A3Ni8CS0y2Y!pcqILE6VYZ3kuNafrVyFcuPl78qLVLvCZ8TDCtcZOeP39W6lRqsjZ7q5B_U2w1cPnrY$ FAQ: https://urldefense.com/v3/__https://cygwin.com/faq/__;!!A3Ni8CS0y2Y!pcqILE6VYZ3kuNafrVyFcuPl78qLVLvCZ8TDCtcZOeP39W6lRqsjZ7q5B_U2LSeCxDU$ Documentation: https://urldefense.com/v3/__https://cygwin.com/docs.html__;!!A3Ni8CS0y2Y!pcqILE6VYZ3kuNafrVyFcuPl78qLVLvCZ8TDCtcZOeP39W6lRqsjZ7q5B_U2TGoD1FI$ Unsubscribe info: https://urldefense.com/v3/__https://cygwin.com/ml/*unsubscribe-simple__;Iw!!A3Ni8CS0y2Y!pcqILE6VYZ3kuNafrVyFcuPl78qLVLvCZ8TDCtcZOeP39W6lRqsjZ7q5B_U23r0nYsU$ -- Problem reports: https://cygwin.com/problems.html FAQ: https://cygwin.com/faq/ Documentation:https://cygwin.com/docs.html Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple
Re: setup-x86_64.exe does not start in win10 20H2
On 12/10/2021 9:39 AM, Kutty, Rejeesh wrote: I can't launch setup-x86_64.exe, but setup-x86 runs fine. [...] ModLoad: 7ffd`4371 7ffd`4374a000 C:\WINDOWS\SYSTEM32\privman64.dll What is this and why is it being loaded? Ken -- Problem reports: https://cygwin.com/problems.html FAQ: https://cygwin.com/faq/ Documentation:https://cygwin.com/docs.html Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple
RE: setup-x86_64.exe does not start in win10 20H2
MD5SUM from bash shell: (seems to match) [/cygdrive/c/Users/rkutty/Downloads]> md5sum setup-*x86_64.exe 82f0a6cf3a2b228acf0b2009dc6f6d42 *setup-2.909.x86_64.exe 02bf8c1db4b4e5ead39c1812bd13 *setup-2.910-3-g217aad.x86_64.exe be948258a63ff971c6f21ebc2a8af43e *setup-2.910.x86_64.exe 82f0a6cf3a2b228acf0b2009dc6f6d42 *setup-x86_64.exe Trying in a different folder on command prompt: c:\TEMP>setup-2.910.x86_64.exe -V But If I run 32bit: c:\TEMP>setup-x86.exe -V c:\TEMP>Cygwin setup 2.909 c:\TEMP> -Original Message- From: Cygwin On Behalf Of Marco Atzeri Sent: Friday, December 10, 2021 10:31 AM To: cygwin@cygwin.com Subject: Re: setup-x86_64.exe does not start in win10 20H2 [External] On 10.12.2021 16:19, Kutty, Rejeesh wrote: > > Thanks, > > I did try deleting, re-downloading many times, no luck. > I also tried the following versions from the link you gave me > (cygwin.com/setup/): > > setup-2.909.x86_64.exe > setup-2.910.x86_64.exe > setup-2.910-3-g217aad.x86_64.exe > > All behave the same way. > can you check the files ? $ md5sum setup-*x86_64.exe be948258a63ff971c6f21ebc2a8af43e *setup-2.910.x86_64.exe 02bf8c1db4b4e5ead39c1812bd13 *setup-2.910-3-g217aad.x86_64.exe 82f0a6cf3a2b228acf0b2009dc6f6d42 *setup-x86_64.exe additional, as I see CommandLine: C:\Users\rkutty\Downloads\setup-x86_64.exe Can you also try to run it in a different directory like C:\TEMP ? -- Problem reports: https://urldefense.com/v3/__https://cygwin.com/problems.html__;!!A3Ni8CS0y2Y!twvpymEizoN61iP3hZzPtTY-xon0FL_RCITMP0pPncMKipVHe8kqbEY7FV-ItQuIXZY$ FAQ: https://urldefense.com/v3/__https://cygwin.com/faq/__;!!A3Ni8CS0y2Y!twvpymEizoN61iP3hZzPtTY-xon0FL_RCITMP0pPncMKipVHe8kqbEY7FV-I2HWLH_w$ Documentation: https://urldefense.com/v3/__https://cygwin.com/docs.html__;!!A3Ni8CS0y2Y!twvpymEizoN61iP3hZzPtTY-xon0FL_RCITMP0pPncMKipVHe8kqbEY7FV-ImxtVucA$ Unsubscribe info: https://urldefense.com/v3/__https://cygwin.com/ml/*unsubscribe-simple__;Iw!!A3Ni8CS0y2Y!twvpymEizoN61iP3hZzPtTY-xon0FL_RCITMP0pPncMKipVHe8kqbEY7FV-Ir-t2QcA$ -- Problem reports: https://cygwin.com/problems.html FAQ: https://cygwin.com/faq/ Documentation:https://cygwin.com/docs.html Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple
Re: Native ARM support for Cygwin
I expect a crawling speed when running Cygwin in a ARM x86_64 emulation mode When I tried that a while ago on a macbook air m1 I was actually quite impressed. I ran windows-10-for-arm within UTM on the Mac. This was back in August and at that time ar least I had some misery with networking in the Windows world. Native ARM code runs with very little slowdown under Windows/UTM but what astonished me was that my own code running under cygwin-x86_64 in that world was maybe only a factor of 3 down on the same code native built on the Mac. So a slowdown but the Mac m1 is sufficiently fast that that is not really a crawl. I have not tried more recently and am concerned with rumours that Microsoft may withdraw x86_64 emulation from W10 (but keep it in W11), and with concerns about windows-for-arm licenses for use in a virtual environment. Arthur -- Problem reports: https://cygwin.com/problems.html FAQ: https://cygwin.com/faq/ Documentation:https://cygwin.com/docs.html Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple
Re: setup-x86_64.exe does not start in win10 20H2
On 10.12.2021 16:19, Kutty, Rejeesh wrote: Thanks, I did try deleting, re-downloading many times, no luck. I also tried the following versions from the link you gave me (cygwin.com/setup/): setup-2.909.x86_64.exe setup-2.910.x86_64.exe setup-2.910-3-g217aad.x86_64.exe All behave the same way. can you check the files ? $ md5sum setup-*x86_64.exe be948258a63ff971c6f21ebc2a8af43e *setup-2.910.x86_64.exe 02bf8c1db4b4e5ead39c1812bd13 *setup-2.910-3-g217aad.x86_64.exe 82f0a6cf3a2b228acf0b2009dc6f6d42 *setup-x86_64.exe additional, as I see CommandLine: C:\Users\rkutty\Downloads\setup-x86_64.exe Can you also try to run it in a different directory like C:\TEMP ? -- Problem reports: https://cygwin.com/problems.html FAQ: https://cygwin.com/faq/ Documentation:https://cygwin.com/docs.html Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple
Re: Re: setup-x86_64.exe does not start in win10 20H2
Thanks, I did try deleting, re-downloading many times, no luck. I also tried the following versions from the link you gave me (cygwin.com/setup/): setup-2.909.x86_64.exe setup-2.910.x86_64.exe setup-2.910-3-g217aad.x86_64.exe All behave the same way. -- Problem reports: https://cygwin.com/problems.html FAQ: https://cygwin.com/faq/ Documentation:https://cygwin.com/docs.html Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple
Re: Native ARM support for Cygwin
On 10.12.2021 15:18, Jon Turney wrote: On 08/12/2021 11:12, Corinna Vinschen wrote: On DecĀ 8 02:07, Aaron Franke via Cygwin wrote: Hello Cygwin, I am wondering what are the plans for adding support for native ARM64 Windows to Cygwin. Currently there are only downloads for x86 (both 32-bit and 64-bit), but not for ARM. I do see in the FAQ that there is a mention of how ARM systems can run the x86 version of Cygwin, however I am interested in a native ARM64 That FAQ is out of date, since with a sufficiently recent Windows (Windows 11, I think), ARM also has x86_64 emulation (which should be preferred). I expect a crawling speed when running Cygwin in a ARM x86_64 emulation mode -- Problem reports: https://cygwin.com/problems.html FAQ: https://cygwin.com/faq/ Documentation:https://cygwin.com/docs.html Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple
Re: setup-x86_64.exe does not start in win10 20H2
On 10.12.2021 15:39, Kutty, Rejeesh wrote: Hi, I can't launch setup-x86_64.exe, but setup-x86 runs fine. Hi Kutty, It works fine on my W10 21H1 May be a corrupted download ? Can you download it again ? You can also try the last setup snapshots: https://sourceware.org/pipermail/cygwin/2021-December/250130.html -- Problem reports: https://cygwin.com/problems.html FAQ: https://cygwin.com/faq/ Documentation:https://cygwin.com/docs.html Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple
setup-x86_64.exe does not start in win10 20H2
Hi, I can't launch setup-x86_64.exe, but setup-x86 runs fine. PC Info: Windows 10, 20H2, OS build: 19042.1348 64-bit operating system, x64-based processor Windows Feature Experience Pack 120.2212.3920.0 I tried to run from a command prompt, same behavior. I tried various flags, -B, -a, -t, -V, same behavior. I tried to debug using the WinDBG tool, here is the output: Apologies in advance, if the following is irrelevant. Microsoft (R) Windows Debugger Version 10.0.22000.194 AMD64 Copyright (c) Microsoft Corporation. All rights reserved. CommandLine: C:\Users\rkutty\Downloads\setup-x86_64.exe * Path validation summary ** Response Time (ms) Location Deferred srv* Symbol search path is: srv* Executable search path is: ModLoad: `0040 `008e4000 image`0040 ModLoad: 7ffd`4629 7ffd`46485000 ntdll.dll ModLoad: 7ffd`45cc 7ffd`45d7e000 C:\WINDOWS\System32\KERNEL32.DLL ModLoad: 7ffd`439b 7ffd`43c78000 C:\WINDOWS\System32\KERNELBASE.dll ModLoad: 7ffd`4476 7ffd`4480c000 C:\WINDOWS\System32\ADVAPI32.DLL ModLoad: 7ffd`45e3 7ffd`45ece000 C:\WINDOWS\System32\msvcrt.dll ModLoad: 7ffd`459f 7ffd`45a8b000 C:\WINDOWS\System32\sechost.dll ModLoad: 7ffd`44b4 7ffd`44c6a000 C:\WINDOWS\System32\RPCRT4.dll (1a1c.3788): Break instruction exception - code 8003 (first chance) ntdll!LdrpDoDebuggerBreak+0x30: 7ffd`463606b0 cc int 3 0:000> g ModLoad: 7ffd`4371 7ffd`4374a000 C:\WINDOWS\SYSTEM32\privman64.dll ModLoad: 7ffd`4493 7ffd`44ad1000 C:\WINDOWS\System32\USER32.dll ModLoad: 7ffd`43d8 7ffd`43da2000 C:\WINDOWS\System32\win32u.dll ModLoad: 7ffd`44c7 7ffd`44c9b000 C:\WINDOWS\System32\GDI32.dll ModLoad: 7ffd`43fd 7ffd`440db000 C:\WINDOWS\System32\gdi32full.dll ModLoad: 7ffd`440e 7ffd`4417d000 C:\WINDOWS\System32\msvcp_win.dll ModLoad: 7ffd`43c8 7ffd`43d8 C:\WINDOWS\System32\ucrtbase.dll ModLoad: 7ffd`44e5 7ffd`4558f000 C:\WINDOWS\System32\SHELL32.dll ModLoad: 7ffd`44ca 7ffd`44dca000 C:\WINDOWS\System32\ole32.dll ModLoad: 7ffd`4559 7ffd`458e5000 C:\WINDOWS\System32\combase.dll ModLoad: 7ffd`44ae 7ffd`44b35000 C:\WINDOWS\System32\SHLWAPI.dll ModLoad: 7ffd`4387 7ffd`4389e000 C:\WINDOWS\SYSTEM32\USERENV.dll ModLoad: 7ffd`458f 7ffd`4592 C:\WINDOWS\System32\IMM32.DLL (1a1c.3788): Access violation - code c005 (first chance) First chance exceptions are reported before any exception handling. This exception may be expected and handled. *** WARNING: Unable to verify timestamp for C:\Users\rkutty\Downloads\setup-x86_64.exe setup_x86_64+0xe34dd: `004e34dd add byte ptr [rax],al ds:`0224=?? 0:000> g (1a1c.3788): Access violation - code c005 (!!! second chance !!!) setup_x86_64+0xe34dd: `004e34dd add byte ptr [rax],al ds:`0224=?? 0:000> g (1a1c.3788): Access violation - code c005 (first chance) First chance exceptions are reported before any exception handling. This exception may be expected and handled. setup_x86_64+0xe34dd: `004e34dd add byte ptr [rax],al ds:`0224=?? Thanks, Rejeesh -- Problem reports: https://cygwin.com/problems.html FAQ: https://cygwin.com/faq/ Documentation:https://cygwin.com/docs.html Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple
Re: Native ARM support for Cygwin
On 08/12/2021 11:12, Corinna Vinschen wrote: On Dec 8 02:07, Aaron Franke via Cygwin wrote: Hello Cygwin, I am wondering what are the plans for adding support for native ARM64 Windows to Cygwin. Currently there are only downloads for x86 (both 32-bit and 64-bit), but not for ARM. I do see in the FAQ that there is a mention of how ARM systems can run the x86 version of Cygwin, however I am interested in a native ARM64 That FAQ is out of date, since with a sufficiently recent Windows (Windows 11, I think), ARM also has x86_64 emulation (which should be preferred). -- Problem reports: https://cygwin.com/problems.html FAQ: https://cygwin.com/faq/ Documentation:https://cygwin.com/docs.html Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple
Re: Help with the prunepaths option with findutils updatedb locate
Brian, Thanks very much for the prunepaths regexes, the /proc/filesystems output, mount command, and info and man command lines, and the suggestions for better posting. -- Problem reports: https://cygwin.com/problems.html FAQ: https://cygwin.com/faq/ Documentation:https://cygwin.com/docs.html Unsubscribe info: https://cygwin.com/ml/#unsubscribe-simple