Re: rescue grub -- help!
On 3/24/06, David Liontooth [EMAIL PROTECTED] wrote: I cloned a drive, starting with the MBR: dd if=/dev/hda of=/dev/hdc bs=446 count=1 However, after installing the cloned drive in the new machine, all I get is a scrolling GRUB filling the screen. I downloaded an amd64 netboot CD, mounted / and /boot in /target, Did you do a mount -o bind /dev /target/dev ? [...] In the installer shell, I get ~ # df Filesystem 1k-blocks Used Available Use% Mounted on tmpfs 102400 30248 72152 30% / /dev/cdroms/cdrom0 86390 86390 0 100% /cdrom /dev/ide/host0/bus0/target0/lun0/part2 7740384 3197252 4149944 44% /target /dev/ide/host0/bus0/target0/lun0/part197826 9736 82871 11% /target/boot So /dev is not bind mounted in target, try bind mounting it So it's using devfs, which I thought was deprecated? http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=274511 AFAIK Sarge CD uses devfs, but the etch installer uses udev, quote from that bugreport: d-i uses the device naming scheme originally used by devfs (although we use udev now). What do I tell grub-installer? Use devfs naming, /dev/ide/host0/, see where is the equivalent of hda. [...] klogd[245]: segfault at 003e rip 002a9568b94e rsp 007fbfffe2a0 error 6 How did this segfault happen? [...] What can I do? All I want is to rewrite the MBR, the installation itself is fine. If the netboot CD isnt working for you, could you try using a LiveCD, like Knoppix?
Re: Controlling allocation in 64-bit space
Quoting Goswin von Brederlow [EMAIL PROTECTED]: mmap /dev/zero, that way you can pick the address you want. Yep. This was the thing that finally occurred to me. Seems to work as might be expected. Thanks for your help, --d -- Davyd MadeleySoftware Engineer Fugro Seismic Imaging, Perth Australia -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Controlling allocation in 64-bit space
Le Fri, Mar 24, 2006 at 04:24:46PM +0800, Davyd Madeley écrivait/wrote: Quoting Goswin von Brederlow [EMAIL PROTECTED]: mmap /dev/zero, that way you can pick the address you want. I suggest more precisely to mmap((void*)0, (size_t)size, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, (int)-1 /*no fd*/, (off_t)0) with MAP_ANONYMOUS you don't need to open /dev/zero (but internally it is the same) Regards -- Basile STARYNKEVITCH http://starynkevitch.net/Basile/ email: basileatstarynkevitchdotnet aliases: basileattunesdotorg = bstarynkatnerimdotnet 8, rue de la Faïencerie, 92340 Bourg La Reine, France -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: amd64 dualcore nad raid1
I use that exact board with the same setup. The RAID1 on it is not true RAID, so I use the Linux Software RAID to set up two RAID1 arrays of 2 drives each (i need two separate physical arrays for my purposes). It works well, and performance is good. Debian Sarge with the 2.6 kernel detects all hardware nicely. I recommend that setup. - Naz Francesco Pietra wrote: i intend to setup a workstation for quantum mechanical calculations (organic chemistry) with a couple of amd64 dualcore 265 and a couple of STA hard disks 360GB raid 1 (mirroring for security reasons). Do you think that mainboard Tyan Thunder S2877ANDF x 2 Dual Opteron under debian testing/unstable provides adequate raid 1 support without going to expensive 3ware products? I plan to have 2GB ram, but that is not enough for the calculations and frequent access to disk occurs. Remember that i am based in italy where the market is under rigid control by whom you can easily imagine so that it is not easy to get what one wants (for example main boards). i am happy when i meet a handler who follows my linux requests, most do not. thanks for answering Francesco Pietra -- MrNaz photo gallery and journal at: www.mrnaz.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: amd64 dualcore nad raid1
Apologies, I use a slightly different board, the one on the Tyan Transport Server Chassis GT24. Its the same chipset though, so you can pretty safely assume Sarge will have the same support for it. - Naz. Naz Gassiep wrote: I use that exact board with the same setup. The RAID1 on it is not true RAID, so I use the Linux Software RAID to set up two RAID1 arrays of 2 drives each (i need two separate physical arrays for my purposes). It works well, and performance is good. Debian Sarge with the 2.6 kernel detects all hardware nicely. I recommend that setup. - Naz Francesco Pietra wrote: i intend to setup a workstation for quantum mechanical calculations (organic chemistry) with a couple of amd64 dualcore 265 and a couple of STA hard disks 360GB raid 1 (mirroring for security reasons). Do you think that mainboard Tyan Thunder S2877ANDF x 2 Dual Opteron under debian testing/unstable provides adequate raid 1 support without going to expensive 3ware products? I plan to have 2GB ram, but that is not enough for the calculations and frequent access to disk occurs. Remember that i am based in italy where the market is under rigid control by whom you can easily imagine so that it is not easy to get what one wants (for example main boards). i am happy when i meet a handler who follows my linux requests, most do not. thanks for answering Francesco Pietra -- MrNaz photo gallery and journal at: www.mrnaz.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Installing Debian on sata drive with adaptec aic-8130 controller V2
Leopold Palomo Avellaneda schrieb: - the sata_mv driver doesn't work in a HP proliant ml150 g2 box. Although the driver detects the hds, the system is very unusable because of time out of access to the hds. Yes, that was for me the same. - the marvell driver is gpl, compiling it in a recent kernel is a pain ..:-( However the combination of version 3.4 (patched) and 2.6.8 works ok. The version 3.6.1 compile in a 2.6.15 but it give me some errors on the device when I load the driver. I used sarge, so I tested it only 2.6.8... - I have only tested on ia32 arch, but I think that it worsewhile to make some test in the amd64 arch. ... on and64. It works. - I don't know what is the best way in this situation. We have two drivers for the same hardware: one of the main company, released in a free licence after some time time, and another a free driver, developed by the community that doesn't work in some some hardware. What do you recommend? I wait, until the modul in the kernel is marked stable, then I will switch to the kernel modul. Up until then I will use the on of the company. Regards, Marc -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
unable to open initial console (was: rescue grub -- help!)
Hi Török, Thank you, that's very helpful. I ended up just installing a new Debian on a different partition; once that was done, the installer agreed to rewrite the MBR, and my old installation showed up in grub. I would much prefer being allowed to rewrite the MBR without first having to install another OS. Once I got that far, I could boot into the OS I'm trying to rescue; however, I now ran into the dreaded warning: unable to open initial console. This is also /dev/ related, and this suggests I have a general dev problem with the partition I cloned. Now that I have a parallel partition that is fully operational, is there a way I can repopulate my /dev directory from chroot, or through a script? Using mount -o bind /dev /root2/dev, I can now chroot into /root2 and see I have a complete /dev directory, so that for instance I can mount /dev/hda1 on a chrooted /boot. How do I make this happen when I boot directly into that partition? I added this to /etc/fstab: devpts /dev/pts devpts mode=0620,gid=5 0 0 But it didn't solve the problem. This seems to be a well-defined problem that should have a straightforward solution. I appreciate your help with this; the partition I'm trying to rescue is in a stable functional state that is no longer possible to duplicate. Dave Török Edvin wrote: On 3/24/06, David Liontooth [EMAIL PROTECTED] wrote: I cloned a drive, starting with the MBR: dd if=/dev/hda of=/dev/hdc bs=446 count=1 However, after installing the cloned drive in the new machine, all I get is a scrolling GRUB filling the screen. I downloaded an amd64 netboot CD, mounted / and /boot in /target, Did you do a mount -o bind /dev /target/dev ? [...] In the installer shell, I get ~ # df Filesystem 1k-blocks Used Available Use% Mounted on tmpfs 102400 30248 72152 30% / /dev/cdroms/cdrom0 86390 86390 0 100% /cdrom /dev/ide/host0/bus0/target0/lun0/part2 7740384 3197252 4149944 44% /target /dev/ide/host0/bus0/target0/lun0/part197826 9736 82871 11% /target/boot So /dev is not bind mounted in target, try bind mounting it So it's using devfs, which I thought was deprecated? http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=274511 AFAIK Sarge CD uses devfs, but the etch installer uses udev, quote from that bugreport: d-i uses the device naming scheme originally used by devfs (although we use udev now). What do I tell grub-installer? Use devfs naming, /dev/ide/host0/, see where is the equivalent of hda. [...] klogd[245]: segfault at 003e rip 002a9568b94e rsp 007fbfffe2a0 error 6 How did this segfault happen? [...] What can I do? All I want is to rewrite the MBR, the installation itself is fine. If the netboot CD isnt working for you, could you try using a LiveCD, like Knoppix? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: rescue grub -- help!
Hi David, I am a little bit curious why you have chosen to clone the drive with dd? I have always used a different route for cloning a system (see also Duping a Drive Under Linux, http://linuxgazette.net/issue64/tag/12.html): 1. Partition the new drive as necessary; 2. Mount the partitions in the right order under your existing system (for instance in /mnt); 3. Copy the complete system with cp -ax; 4. Use grub to install it to the MBR of the new drive; 5. Transfer the drive to your new system. This route has an additional advantage: you can change the size of any partition if necessary, and even use a totally different partition layout! I never encountered any problems on this route. Regards, Clemens On Friday 24 March 2006 05:00, David Liontooth wrote: I cloned a drive, starting with the MBR: dd if=/dev/hda of=/dev/hdc bs=446 count=1 However, after installing the cloned drive in the new machine, all I get is a scrolling GRUB filling the screen. I downloaded an amd64 netboot CD, mounted / and /boot in /target, and issued chroot /target Everything in there works fine -- the applications run. (I'm sitting at another computer at this point with remote access to the installer). But what I was counting on working, namely grub-install /dev/hda which used to work on i386, maybe a year or two ago, now gives me /dev/hda: Not found or not a block device. If I do df, chroot sees only this: Filesystem 1K-blocks Used Available Use% Mounted on sysfs 7740384 3197252 4149944 44% /sys df: `/dev/pts': No such file or directory tmpfs 7740384 3197252 4149944 44% /dev In the installer shell, I get ~ # df Filesystem 1k-blocks Used Available Use% Mounted on tmpfs 102400 30248 72152 30% / /dev/cdroms/cdrom0 86390 86390 0 100% /cdrom /dev/ide/host0/bus0/target0/lun0/part2 7740384 3197252 4149944 44% /target /dev/ide/host0/bus0/target0/lun0/part197826 9736 82871 11% /target/boot So it's using devfs, which I thought was deprecated? What do I tell grub-installer? When I chrooted to /target, it rewrote /etc/fstab (why?), like this: # /etc/fstab: static file system information. # # file system mount point type options dump pass proc/proc procdefaults0 0 /dev/hda2 / ext3defaults,errors=remount-ro 0 1 /dev/hda1 /boot ext3defaults0 2 /dev/hda5 noneswapsw 0 0 /dev/hdc/media/cdrom0 iso9660 ro,user,noauto 0 0 In dmesg, I get NFORCE3-250: :00:08.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA klogd[245]: segfault at 003e rip 002a9568b94e rsp 007fbfffe2a0 error 6 hda: WDC WD800BB-75CAA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: HITACHI DVD-ROM GD-7000, ATAPI CD/DVD-ROM drive Obviously /dev/hda is seen, since the chroot is running on it. What can I do? All I want is to rewrite the MBR, the installation itself is fine. Dave -- --- Clemens Bergmann Schwertlilienweg 14 68259 Mannheim [EMAIL PROTECTED] --- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
KDE 3.4 or 3.5 sarge backports for amd64?
Backports.org used to have what looked like a complete 3.4.x backport to sarge for amd64 (although admittedly I never tried it). Now it looks as though they have a partial (and therefore not installable) 3.5.x backport for amd64... Anyone have any tips where to find a complete KDE backport for some recent version of KDE for amd64? Thanks! Dale -- Dale E. Martin - [EMAIL PROTECTED] http://the-martins.org/~dmartin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: VMWare does not start after update to libc6-i386?
On Wed, 2006-03-22 at 10:37 +0100, Goswin von Brederlow wrote: Joost Kraaijeveld [EMAIL PROTECTED] writes: Hi, Since I updated my Etch AMD64 from with ia32-libs to libc6-i386 I cannot start VMWare 5.5 anymore. Is it possible to let it run again or do I have to try to reinstall ia32-libs? If I should reinstall ia32-libs, how can I do that: I get all sorts of dependency errors that I cannot solve? Should I first completely un-install libc6-i386 and than try to reinstall ia32-libs? TIA Install it from sid. Any problems left? Now I have more problems ;-), more along the lines of one of the other posts: panoramix:/etc# vmware-config.pl The correct version of one or more libraries needed to run VMware Workstation may be missing. This is the output of ldd /usr/bin/vmware: linux-gate.so.1 = (0xe000) libm.so.6 = /emul/ia32-linux/lib/libm.so.6 (0x5557e000) libdl.so.2 = /emul/ia32-linux/lib/libdl.so.2 (0x555a2000) libpthread.so.0 = /emul/ia32-linux/lib/libpthread.so.0 (0x555a6000) libX11.so.6 = not found libXtst.so.6 = not found libXext.so.6 = not found libXt.so.6 = not found libICE.so.6 = not found libSM.so.6 = not found libXrender.so.1 = not found libz.so.1 = not found libc.so.6 = /emul/ia32-linux/lib/libc.so.6 (0x555ba000) /lib/ld-linux.so.2 (0x5000) Joost -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Lost keyring and terminal background after loosin home directory
Hi, I lost part of my stting in my home directory because of a system crash. Before the crash I had the following features that I would like get back (I did not install /configure them on purpose but they appeared suddenly, much to my pleasure): 1. I only had to give my password once during a session after which I could use synaptic and a root console without being asked for a password. 2. The background of a root console was white, the background of an ordinary console black. How do I get these features back again? TIA Joost -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
[P-a-s] Please enable %firebird2/amd64 to help unblock qt-x11-free.
Greetings. As an amd64 user (though admittedly not an official porter), I have been following the new official buildd's progress with some interest, and observed a problem with the potential to block quite a few packages: although the firebird2 source package rightly claims to support amd64 (I just verified that 1.5.3.4870-3 builds without errors on my system), Packages-arch-specific lists it as specific to (hurd-)i386. Could you please bless it for amd64 as well? Thanks! [Ordinarily, this wouldn't necessarily be a big deal; however, the old unofficial buildd built a few versions of firebird2 despite the P-a-s entry, so qt-x11-free wound up adding a build-dependency on firebird2-dev on November 29. As such, it will now be in perpetual dep-wait unless something is done to free it, and in turn hold back quite a few other packages -- particularly given gnome-vfs2's counterintuitive indirect build-dependency on qt-x11-free by way of avahi.] -- Aaron M. Ucko, KB1CJC (amu at alum.mit.edu, ucko at debian.org) Finger [EMAIL PROTECTED] (NOT a valid e-mail address) for more info. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [P-a-s] Please enable %firebird2/amd64 to help unblock qt-x11-free.
On Fri, Mar 24, 2006 at 02:00:12PM -0500, Aaron M. Ucko wrote: Greetings. As an amd64 user (though admittedly not an official porter), I have been following the new official buildd's progress with some interest, and observed a problem with the potential to block quite a few packages: although the firebird2 source package rightly claims to support amd64 (I just verified that 1.5.3.4870-3 builds without errors on my system), Packages-arch-specific lists it as specific to (hurd-)i386. Could you please bless it for amd64 as well? I've requested that myself like half an hour before your mail, and it was added within 10 minutes. Kurt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: VMWare does not start after update to libc6-i386?
Joost Kraaijeveld [EMAIL PROTECTED] writes: On Wed, 2006-03-22 at 10:37 +0100, Goswin von Brederlow wrote: Joost Kraaijeveld [EMAIL PROTECTED] writes: Hi, Since I updated my Etch AMD64 from with ia32-libs to libc6-i386 I cannot start VMWare 5.5 anymore. Is it possible to let it run again or do I have to try to reinstall ia32-libs? If I should reinstall ia32-libs, how can I do that: I get all sorts of dependency errors that I cannot solve? Should I first completely un-install libc6-i386 and than try to reinstall ia32-libs? TIA Install it from sid. Any problems left? Now I have more problems ;-), more along the lines of one of the other posts: panoramix:/etc# vmware-config.pl The correct version of one or more libraries needed to run VMware Workstation may be missing. This is the output of ldd /usr/bin/vmware: linux-gate.so.1 = (0xe000) libm.so.6 = /emul/ia32-linux/lib/libm.so.6 (0x5557e000) libdl.so.2 = /emul/ia32-linux/lib/libdl.so.2 (0x555a2000) libpthread.so.0 = /emul/ia32-linux/lib/libpthread.so.0 (0x555a6000) libX11.so.6 = not found libXtst.so.6 = not found libXext.so.6 = not found libXt.so.6 = not found libICE.so.6 = not found libSM.so.6 = not found libXrender.so.1 = not found libz.so.1 = not found libc.so.6 = /emul/ia32-linux/lib/libc.so.6 (0x555ba000) /lib/ld-linux.so.2 (0x5000) Joost ls -lh /lib/ldconfig/ MfG Goswin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: VMWare does not start after update to libc6-i386?
Goswin von Brederlow said the following on 03/23/2006 08:31 PM: Kourosh [EMAIL PROTECTED] writes: On my system, the libraries are there under /emul/ia32-linux/ but VMware didn't seem to find them. What I did that appears to fix the problem was to add the /emul/ia32-linux/ directories to my /etc/ld.so.conf file and re-run ldconfig as root. This is what I added in my ld.so.conf file: /emul/ia32-linux/lib/ /emul/ia32-linux/usr/lib/ /emul/ia32-linux/usr/X11R6/ /emul/ia32-linux/usr/X11R6/lib/ I'm not sure if all of that is needed, but the last line definitely was. Then I re-ran ldconfig and VMware would start. We'll have to see if it keeps working =) Hope this helps. Kourosh What libc6 version do you have? ls -lh /lib/ldconfig MfG Goswin [EMAIL PROTECTED]:~$ ls -lh /lib/ldconfig/ total 0 lrwxrwxrwx 1 root root 20 2006-03-23 11:36 emul_ia32-linux_lib - /emul/ia32-linux/lib lrwxrwxrwx 1 root root 24 2006-03-23 11:36 emul_ia32-linux_usr_lib - /emul/ia32-linux/usr/lib lrwxrwxrwx 1 root root 30 2006-03-23 11:36 emul_ia32-linux_usr_X11R6_lib - /emul/ia32-linux/usr/X11R6/lib lrwxrwxrwx 1 root root 19 2006-03-22 15:37 x86_64-linux-gnu-lib - ../x86_64-linux-gnu lrwxrwxrwx 1 root root 25 2006-03-22 15:37 x86_64-linux-gnu-usr-lib - /usr/lib/x86_64-linux-gnu [EMAIL PROTECTED]:~$ dpkg -l | grep -e libc6 -e ia32-libs ii ia32-libs 1.6 ia32 shared libraries for use on amd64 and i ri libc6 2.3.6-4 GNU C Library: Shared libraries and Timezone ii libc6-dev 2.3.6-4 GNU C Library: Development Libraries and Hea ii libc6-dev-i386 2.3.6-4 GNU C Library: 32bit development libraries f ii libc6-i386 2.3.6-4 GNU C Library: 32bit shared libraries for AM Regards, Kourosh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Controlling allocation in 64-bit space
Basile STARYNKEVITCH [EMAIL PROTECTED] writes: Le Fri, Mar 24, 2006 at 04:24:46PM +0800, Davyd Madeley écrivait/wrote: Quoting Goswin von Brederlow [EMAIL PROTECTED]: mmap /dev/zero, that way you can pick the address you want. I suggest more precisely to mmap((void*)0, (size_t)size, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, (int)-1 /*no fd*/, (off_t)0) with MAP_ANONYMOUS you don't need to open /dev/zero (but internally it is the same) Regards Is that protable or just a linux speciality? MfG Goswin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: VMWare does not start after update to libc6-i386?
Kourosh [EMAIL PROTECTED] writes: Goswin von Brederlow said the following on 03/23/2006 08:31 PM: Kourosh [EMAIL PROTECTED] writes: On my system, the libraries are there under /emul/ia32-linux/ but VMware didn't seem to find them. What I did that appears to fix the problem was to add the /emul/ia32-linux/ directories to my /etc/ld.so.conf file and re-run ldconfig as root. This is what I added in my ld.so.conf file: /emul/ia32-linux/lib/ /emul/ia32-linux/usr/lib/ /emul/ia32-linux/usr/X11R6/ /emul/ia32-linux/usr/X11R6/lib/ I'm not sure if all of that is needed, but the last line definitely was. Then I re-ran ldconfig and VMware would start. We'll have to see if it keeps working =) Hope this helps. Kourosh What libc6 version do you have? ls -lh /lib/ldconfig MfG Goswin [EMAIL PROTECTED]:~$ ls -lh /lib/ldconfig/ total 0 lrwxrwxrwx 1 root root 20 2006-03-23 11:36 emul_ia32-linux_lib - /emul/ia32-linux/lib lrwxrwxrwx 1 root root 24 2006-03-23 11:36 emul_ia32-linux_usr_lib - /emul/ia32-linux/usr/lib lrwxrwxrwx 1 root root 30 2006-03-23 11:36 emul_ia32-linux_usr_X11R6_lib - /emul/ia32-linux/usr/X11R6/lib Those three replace the entries in ld.so.conf. Please remove the entries from ld.so.conf and check with ldconfig -v that it scans all 3 emul directories and finds the 32bit X libs. It does here but aparently not for others. And I can't figure out what is going wrong. MfG Goswin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: VMWare does not start after update to libc6-i386?
Goswin von Brederlow said the following on 03/24/2006 01:51 PM: Kourosh [EMAIL PROTECTED] writes: Goswin von Brederlow said the following on 03/23/2006 08:31 PM: What libc6 version do you have? ls -lh /lib/ldconfig MfG Goswin [EMAIL PROTECTED]:~$ ls -lh /lib/ldconfig/ total 0 lrwxrwxrwx 1 root root 20 2006-03-23 11:36 emul_ia32-linux_lib - /emul/ia32-linux/lib lrwxrwxrwx 1 root root 24 2006-03-23 11:36 emul_ia32-linux_usr_lib - /emul/ia32-linux/usr/lib lrwxrwxrwx 1 root root 30 2006-03-23 11:36 emul_ia32-linux_usr_X11R6_lib - /emul/ia32-linux/usr/X11R6/lib Those three replace the entries in ld.so.conf. Please remove the entries from ld.so.conf and check with ldconfig -v that it scans all 3 emul directories and finds the 32bit X libs. It does here but aparently not for others. And I can't figure out what is going wrong. MfG Goswin After I remove the /emul entries from ld.so.conf and rerun ldconfig -v, I see that it does _not_ scan the 3 /emul directories and does _not_ find the 32bit X libs and I again get the same error with vmware not finding the correct libs. At least on my system, the 3 /emul entries are required for vmware to work. I don't have any other 32bit software that I can test. I add back the 3 /emul entries, rerun ldconfig -v, and the 3 /emul directories are scanner and vmware works again. Regards, Kourosh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Controlling allocation in 64-bit space
Le Fri, Mar 24, 2006 at 10:44:43PM +0100, Goswin von Brederlow écrivait/wrote: Basile STARYNKEVITCH [EMAIL PROTECTED] writes: I suggest more precisely to mmap((void*)0, (size_t)size, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, (int)-1 /*no fd*/, (off_t)0) with MAP_ANONYMOUS you don't need to open /dev/zero (but internally it is the same) Regards Is that protable or just a linux speciality? It exists in recent Solaris, Linux, BSD. And should be conformant to SUSv3 but not SUSv2. the UNIX (from SCO) has it http://uw713doc.sco.com/en/man/html.2/mmap.2.html I tend to believe that you can test #ifdef MAP_ANONYMOUS; if it is not defined, you'll need to open /dev/zero. I don't know if the availability of /dev/zero is more common today than MAP_ANONYMOUS MAP_ANONYMOUS is not a linuxism anymore (IIRC, SunOS got it before). But I can't be sure that every Unix have it... (IIRC, SunOS4 did not have it, but SunOS5 have it). And MAP_ANONYMOUS is quite common. Google for mmap MAP_ANONYMOUS ! linux gives significant results. Of course, you may find some systems with mmap without MAP_ANONYMOUS but these are rare, and you can detect them with a #ifdef MAP_ANONYMOUS (I'll be extremely surprised by systems where MAP_ANONYMOUS exist but is not a preprocessor name). But I am not a unix lawyer, even if I did practice several unix before Linux. -- Basile STARYNKEVITCH http://starynkevitch.net/Basile/ email: basileatstarynkevitchdotnet aliases: basileattunesdotorg = bstarynkatnerimdotnet 8, rue de la Faïencerie, 92340 Bourg La Reine, France -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Controlling allocation in 64-bit space
Basile STARYNKEVITCH [EMAIL PROTECTED] writes: Le Fri, Mar 24, 2006 at 10:44:43PM +0100, Goswin von Brederlow écrivait/wrote: Basile STARYNKEVITCH [EMAIL PROTECTED] writes: I suggest more precisely to mmap((void*)0, (size_t)size, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, (int)-1 /*no fd*/, (off_t)0) with MAP_ANONYMOUS you don't need to open /dev/zero (but internally it is the same) Regards Is that protable or just a linux speciality? It exists in recent Solaris, Linux, BSD. And should be conformant to SUSv3 but not SUSv2. the UNIX (from SCO) has it http://uw713doc.sco.com/en/man/html.2/mmap.2.html I tend to believe that you can test #ifdef MAP_ANONYMOUS; if it is not defined, you'll need to open /dev/zero. I was more thinking about mmaping -1. But I see from the manpage that the fd is ignored anyway on MAP_ANONYMOUS so anything should do. MfG Goswin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: VMWare does not start after update to libc6-i386?
Kourosh [EMAIL PROTECTED] writes: After I remove the /emul entries from ld.so.conf and rerun ldconfig -v, I see that it does _not_ scan the 3 /emul directories and does _not_ find the 32bit X libs and I again get the same error with vmware not finding the correct libs. At least on my system, the 3 /emul entries are required for vmware to work. I don't have any other 32bit software that I can test. I add back the 3 /emul entries, rerun ldconfig -v, and the 3 /emul directories are scanner and vmware works again. Regards, Kourosh I have the same versions and the same links in /lib/ldconfig on my system and everything works without anything in ld.so.conf. It doesn't make sense for ldconfig to fail completly on some systems. Please file a bug report about this with libc6. Maybe the maintainers have more insight. MfG Goswin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
root-programs in chroot wont work
Hi I have a problem with running X-programs as root in chroot-inviroment. Things work well when i am a normal user, but when i try running from root for instance synaptic i got the following error: # synaptic Xlib: connection to :0.0 refused by server Xlib: No protocol specified (synaptic:21355): Gtk-WARNING **: cannot open display: I have also tried running as gksu but that wont work either. It shows som wierd error message: Failed to fork new proccess:no such file or directory hope sombody can help Thanks in advance Poul-Erik Andreasen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Firefox over 90% CPU-Usage
Jo Shields spake thusly on 03/23/2006 04:28 AM: antonio giulio wrote: Hi, using Firefox (32bit) often my cpu reaches ~95-100% usage... is it possible avoid it? Thanks, Giulio Stop browsing pages which use the Macromedia Flash plugin Since it's not always possible to know what pages will have a flash plugin, I suggest the FlashBlock extension. It's one of my faves. https://addons.mozilla.org/extensions/moreinfo.php?application=firefoxid=433 or http://flashblock.mozdev.org/ -- Scott www.angrykeyboarder.com © 2006 angrykeyboarder™ Elmer Fudd. All Wights Wesewved
Re: rescue grub -- help!
[EMAIL PROTECTED] wrote: Hi David, I am a little bit curious why you have chosen to clone the drive with dd? I have always used a different route for cloning a system (see also Duping a Drive Under Linux, http://linuxgazette.net/issue64/tag/12.html): Looks good, and better suited to my purpose. What I did basically didn't work out. I could have played it safer and done a single massive dd, but I needed a bit more flexibility. Dave 1. Partition the new drive as necessary; 2. Mount the partitions in the right order under your existing system (for instance in /mnt); 3. Copy the complete system with cp -ax; 4. Use grub to install it to the MBR of the new drive; 5. Transfer the drive to your new system. This route has an additional advantage: you can change the size of any partition if necessary, and even use a totally different partition layout! I never encountered any problems on this route. Regards, Clemens On Friday 24 March 2006 05:00, David Liontooth wrote: I cloned a drive, starting with the MBR: dd if=/dev/hda of=/dev/hdc bs=446 count=1 However, after installing the cloned drive in the new machine, all I get is a scrolling GRUB filling the screen. I downloaded an amd64 netboot CD, mounted / and /boot in /target, and issued chroot /target Everything in there works fine -- the applications run. (I'm sitting at another computer at this point with remote access to the installer). But what I was counting on working, namely grub-install /dev/hda which used to work on i386, maybe a year or two ago, now gives me /dev/hda: Not found or not a block device. If I do df, chroot sees only this: Filesystem 1K-blocks Used Available Use% Mounted on sysfs 7740384 3197252 4149944 44% /sys df: `/dev/pts': No such file or directory tmpfs 7740384 3197252 4149944 44% /dev In the installer shell, I get ~ # df Filesystem 1k-blocks Used Available Use% Mounted on tmpfs 102400 30248 72152 30% / /dev/cdroms/cdrom0 86390 86390 0 100% /cdrom /dev/ide/host0/bus0/target0/lun0/part2 7740384 3197252 4149944 44% /target /dev/ide/host0/bus0/target0/lun0/part197826 9736 82871 11% /target/boot So it's using devfs, which I thought was deprecated? What do I tell grub-installer? When I chrooted to /target, it rewrote /etc/fstab (why?), like this: # /etc/fstab: static file system information. # # file system mount point type options dump pass proc/proc procdefaults0 0 /dev/hda2 / ext3defaults,errors=remount-ro 0 1 /dev/hda1 /boot ext3defaults0 2 /dev/hda5 noneswapsw 0 0 /dev/hdc/media/cdrom0 iso9660 ro,user,noauto 0 0 In dmesg, I get NFORCE3-250: :00:08.0 (rev a2) UDMA133 controller ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA klogd[245]: segfault at 003e rip 002a9568b94e rsp 007fbfffe2a0 error 6 hda: WDC WD800BB-75CAA0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: HITACHI DVD-ROM GD-7000, ATAPI CD/DVD-ROM drive Obviously /dev/hda is seen, since the chroot is running on it. What can I do? All I want is to rewrite the MBR, the installation itself is fine. Dave -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
hp cciss raid controller and d-i grub bug - is there an updated install cd?
just started setting up an HP DL385 today and ran into this very nasty bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=341888 the short of it: grub can't be installed. The bug report has been resolved and is closed, but ... the current set of install cd's _still_ contains the buggy grub. The only jigdo files I can find are of the current release (31r0a), which I already have cds of. I've about exhausted google on this for the last couple of hours. So, what am I missing here? Rolling my own installer image, or something? -- Noah Dain Single failures can occur for a variety of reasons that have nothing to do with a hardware defect, such as cosmic radiation ... - IBM Thinkpad R40 maintenance manual, page 25
Re: Firefox over 90% CPU-Usage
using firefox (32bit) often my cpu reaches ~95-100% usage... is it possible avoid it? How did you go about getting 32-bit Firefox running on 64-bit Debian? It runs in chroot 32 with flash plugin. I'm using the i386 version of Debian even though I have an Athlon 3500+ processor. I gave up on 64-bit Linux because I had too many problems getting apps to work like I wanted (Sun JRE and Macromedia Flash are good examples). Then I'd often find obscure apps that I wanted that also were only i386. Keep a parallel 32-env in a 64-env is not nice just to run 2 or 3 32-bit apps... Giulio -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Apple's diskdev for amd64?
The 2.6.16 kernel has support for HFSX, meaning case-sensitive file names in Apple's latest iteration of its OSX file system. GNU Parted supports the file system, and the Darwin project has ported Apple's filesystem tools to Linux in the diskdev package. Has anyone attempted to compile and run these in a 64-bit environment? For details, see http://gentoo-wiki.com/HOWTO_hfsplus#Compiling_Apple.27s_Filesystem_Tools Dave -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
