Re: Failure within netinst: ide-disk and ide-generic are hanging each other
On Wed, Mar 08, 2006 at 12:13:22AM +0200, Arkadi Kagan wrote: I tried the testing image. The only noticible difference is klogd not running or misconfigured. (after running it manually - all the same) Could you please file an installation report about that? Kurt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Failure within netinst: ide-disk and ide-generic are hanging each other
I am trying to run the Debian netinst with my new ASUS motherboard and AMD. The installation process is stuck when I run modprobe ide-generic modprobe ide-disk The same for oposite. The command cat kmsg is claiming about DMA timeout. ( I may misspell the error message since I can`t use a disk to store things ) Unfortunately the ide-disks are the only disks that I have. Therefore this E-Mail I am writing from WindowsXP. image: sarge-amd64-2.6.12-netinst.iso hardware configuration ( from Windows Device Manager :( ): IDE controller: NVIDIA nForce4 Paralell ATA controller primary channel: master:Maxtor 4D040H2 - Ultra DMA6 - Ultra133 (HardDisk) slave: WDC WD2500JB-00GVA0 - Ultra DMA5 - Ultra100 (second HardDisk) secondary channel: master:SAMSUNG DVD-ROM slave: HL-DT-ST DVD-RAM _ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Failure within netinst: ide-disk and ide-generic are hanging each other
On Tue, Mar 07, 2006 at 08:46:50PM +0200, Arkadi Kagan wrote: I am trying to run the Debian netinst with my new ASUS motherboard and AMD. The installation process is stuck when I run modprobe ide-generic modprobe ide-disk The same for oposite. The command cat kmsg is claiming about DMA timeout. ( I may misspell the error message since I can`t use a disk to store things ) Unfortunately the ide-disks are the only disks that I have. Therefore this E-Mail I am writing from WindowsXP. image: sarge-amd64-2.6.12-netinst.iso hardware configuration ( from Windows Device Manager :( ): IDE controller: NVIDIA nForce4 Paralell ATA controller primary channel: master:Maxtor 4D040H2 - Ultra DMA6 - Ultra133 (HardDisk) slave: WDC WD2500JB-00GVA0 - Ultra DMA5 - Ultra100 (second HardDisk) secondary channel: master:SAMSUNG DVD-ROM slave: HL-DT-ST DVD-RAM Hmm. I would have expected an nforce4 board to work rather easily. Which board is it? You also probably shouldn't need ide-generic at all, but rather amd74xx (at least my nforce2 uses that ide driver). Len Sorensen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Failure within netinst: ide-disk and ide-generic are hanging each other
Thanks for your fast answer. The board is ASUS K8N4-E. Without ide-generic the installer is not able to use CD`s it was booted from. If I don`t load ide-disk, the continuation menu of installer appears, but disks can`t be accessed. There is amd74xx module and it is loaded. From: [EMAIL PROTECTED] (Lennart Sorensen) To: Arkadi Kagan [EMAIL PROTECTED] CC: debian-amd64@lists.debian.org Subject: Re: Failure within netinst: ide-disk and ide-generic are hanging each other Date: Tue, 7 Mar 2006 14:04:01 -0500 On Tue, Mar 07, 2006 at 08:46:50PM +0200, Arkadi Kagan wrote: I am trying to run the Debian netinst with my new ASUS motherboard and AMD. The installation process is stuck when I run modprobe ide-generic modprobe ide-disk The same for oposite. The command cat kmsg is claiming about DMA timeout. ( I may misspell the error message since I can`t use a disk to store things ) Unfortunately the ide-disks are the only disks that I have. Therefore this E-Mail I am writing from WindowsXP. image: sarge-amd64-2.6.12-netinst.iso hardware configuration ( from Windows Device Manager :( ): IDE controller: NVIDIA nForce4 Paralell ATA controller primary channel: master:Maxtor 4D040H2 - Ultra DMA6 - Ultra133 (HardDisk) slave: WDC WD2500JB-00GVA0 - Ultra DMA5 - Ultra100 (second HardDisk) secondary channel: master:SAMSUNG DVD-ROM slave: HL-DT-ST DVD-RAM Hmm. I would have expected an nforce4 board to work rather easily. Which board is it? You also probably shouldn't need ide-generic at all, but rather amd74xx (at least my nforce2 uses that ide driver). Len Sorensen _ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Failure within netinst: ide-disk and ide-generic are hanging each other
Unfortunately I am not able to copy-paste the log. However, here is what I succeeded to write down (from kmsg): amd74xx print versioning info, no error ide-generic klogd[243]: segfault [some addresses] error 6 then goes successfull description of IDE controlled devices ide-disk some info, then hda: dma_timer_expiry: dma status == 0xff From: [EMAIL PROTECTED] (Lennart Sorensen) To: Arkadi Kagan [EMAIL PROTECTED] CC: debian-amd64@lists.debian.org Subject: Re: Failure within netinst: ide-disk and ide-generic are hanging each other Date: Tue, 7 Mar 2006 15:21:09 -0500 On Tue, Mar 07, 2006 at 09:52:37PM +0200, Arkadi Kagan wrote: Thanks for your fast answer. The board is ASUS K8N4-E. Without ide-generic the installer is not able to use CD`s it was booted from. If I don`t load ide-disk, the continuation menu of installer appears, but disks can`t be accessed. There is amd74xx module and it is loaded. Hmm. Pretty sure I have seen people report that A8N* boards worked fine, so I would have thought the K8N* boards should work the same. does dmesg show anything detected when amd74xx is loaded? make sure to load that before ide-generic or ide-generic will take over (and it doesn't do dma and would be very very slow). Len Sorensen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] _ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Failure within netinst: ide-disk and ide-generic are hanging each other
On Tue, Mar 07, 2006 at 10:54:59PM +0200, Arkadi Kagan wrote: Unfortunately I am not able to copy-paste the log. However, here is what I succeeded to write down (from kmsg): amd74xx print versioning info, no error ide-generic klogd[243]: segfault [some addresses] error 6 then goes successfull description of IDE controlled devices ide-disk some info, then hda: dma_timer_expiry: dma status == 0xff The lspci -n output would be really handy, especially for the drive controllers. lspci -n |grep 010 Len Sorensen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Failure within netinst: ide-disk and ide-generic are hanging each other
On Tue, Mar 07, 2006 at 08:46:50PM +0200, Arkadi Kagan wrote: image: sarge-amd64-2.6.12-netinst.iso Could you please try the beta2 image? It's available at: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/iso-cd/ It should have a more recent kernel (2.6.15). Kurt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Failure within netinst: ide-disk and ide-generic are hanging each other
I tried the testing image. The only noticible difference is klogd not running or misconfigured. (after running it manually - all the same) From: Kurt Roeckx [EMAIL PROTECTED] To: Arkadi Kagan [EMAIL PROTECTED] CC: debian-amd64@lists.debian.org Subject: Re: Failure within netinst: ide-disk and ide-generic are hanging each other Date: Tue, 7 Mar 2006 22:08:29 +0100 On Tue, Mar 07, 2006 at 08:46:50PM +0200, Arkadi Kagan wrote: image: sarge-amd64-2.6.12-netinst.iso Could you please try the beta2 image? It's available at: http://cdimage.debian.org/cdimage/daily-builds/daily/arch-latest/amd64/iso-cd/ It should have a more recent kernel (2.6.15). Kurt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] _ FREE pop-up blocking with the new MSN Toolbar - get it now! http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Failure within netinst: ide-disk and ide-generic are hanging each other
lspci is not a part of installer. In /proc/pci I didn`t find anyting like 010. From: [EMAIL PROTECTED] (Lennart Sorensen) To: Arkadi Kagan [EMAIL PROTECTED] CC: debian-amd64@lists.debian.org Subject: Re: Failure within netinst: ide-disk and ide-generic are hanging each other Date: Tue, 7 Mar 2006 15:57:57 -0500 On Tue, Mar 07, 2006 at 10:54:59PM +0200, Arkadi Kagan wrote: Unfortunately I am not able to copy-paste the log. However, here is what I succeeded to write down (from kmsg): amd74xx print versioning info, no error ide-generic klogd[243]: segfault [some addresses] error 6 then goes successfull description of IDE controlled devices ide-disk some info, then hda: dma_timer_expiry: dma status == 0xff The lspci -n output would be really handy, especially for the drive controllers. lspci -n |grep 010 Len Sorensen -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] _ Express yourself instantly with MSN Messenger! Download today it's FREE! http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
