Bug#255545: hppa d-i install success!
Kyle McMartin wrote: System came up fine! Used tasksel to install a few tasks with no issues. The only conceivable problem is that in my xterm running minicom to the B180, tasksel does not highlight what you currently have tabbed, which meant I had to play guessing games to figure out how to hit Finish. Will try using aptitude on tomorrow's build. This will probably be fixed by the tasksel in unstable, which uses the same debconf UI as the rest of the installer. Will try tc2 with a cd-rom boot, when it's released. It would actually be helpful if you could try a sarge_d-i CD build now, or the old tc1, because we've had no install reports on hppa for tc1 at all, and that was one of the reasons it wasn't blessed as a rc1. If it or sarge_d-i still have problems with hppa, we need to get those fixed. -- see shy jo signature.asc Description: Digital signature
Bug#255545: hppa d-i install success!
Package: installation-reports Debian-installer-version: jbailey's 21.06.2004 daily build uname -a: Linux caradhras 2.4.26-32-smp #1 SMP Thu Apr 29 03:20:53 UTC 2004 parisc GNU/Linux Date: Mon Jun 21 13:33:07 EDT 2004 Method: Network booted from local TFTP server. Machine: HP Visualize B180L+ Processor: PA7300LC 180MHz Memory: 416784k Root Device: /dev/sda Root Size/partition table: Device Boot Start End Blocks Id System /dev/sda1 1 31 31728 f0 Linux/PA-RISC boot /dev/sda2 32 275 249856 82 Linux swap /dev/sda3 * 2761740 1500160 83 Linux /dev/sda417414091 2407424 83 Linux sda3 is root, sda4 is /home Output of lspci: caradhras:~# lspci :00:13.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 04) :00:14.0 Ethernet controller: Digital Equipment Corporation DECchip 21142/43 (rev 41) Base System Installation Checklist: Initial boot worked:[O] Configure network HW: [O] Config network: [O] Detect CD: [O] Load installer modules: [O] Detect hard drives: [O] Partition hard drives: [O] Create file systems:[O] Mount partitions: [O] Install base system:[O] Install boot loader:[O] Reboot: [O] [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Comments/Problems: System came up fine! Used tasksel to install a few tasks with no issues. The only conceivable problem is that in my xterm running minicom to the B180, tasksel does not highlight what you currently have tabbed, which meant I had to play guessing games to figure out how to hit Finish. Will try using aptitude on tomorrow's build. Will try tc2 with a cd-rom boot, when it's released. Thanks! -- Kyle McMartin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#255545: hppa d-i install success!
* Kyle McMartin [EMAIL PROTECTED] [2004-06-21 14:10]: System came up fine! Used tasksel to install a few tasks with no issues. The only conceivable problem is that in my xterm running minicom to the B180, tasksel does not highlight what you currently have tabbed, which meant I had to play guessing games to figure out how to I guess you're not using colour with minicom? -- Martin Michlmayr [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#255545: hppa d-i install success!
On Mon, Jun 21, 2004 at 07:24:21PM +0100, Martin Michlmayr wrote: I guess you're not using colour with minicom? I'm using the sane defaults. Regards, -- Kyle McMartin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
