Bug#978758: linux-image-5.5.0-0.bpo.2-amd64: Fails to suspend with „Some devices failed to suspend, or early wake event detected”
On 31-12-2020, at 15:22:01 Ben Hutchings wrote: > Control: tag -1 moreinfo > > On Thu, 2020-12-31 at 13:29 +0100, Emil Nowak wrote: > > Package: src:linux > > Version: 5.5.17-1~bpo10+1 > > This is quite old now; please test whether the issue still exists in > the current version (5.9.6-1~bpo10+1). I upgraded to 5.9.15-1. It doesn't work in a different way: 1. There is no error in dmesg. 2. Monitor seems to go offline - it is blank But, 1. All fans are still spining 2. Power button on komputer is backlit as it was powered-on.
Bug#978758: linux-image-5.5.0-0.bpo.2-amd64: Fails to suspend with „Some devices failed to suspend, or early wake event detected”
Package: src:linux Version: 5.5.17-1~bpo10+1 Severity: normal Dear Maintainer, When I invoke suspend using: # systemctl suspend machine starts suspending but after turning off monitor and disks spinning, it wakes up again. It used to work on the same machine - I'm not sure after which upgrade it failed. In dmesg -T I have: [Thu Dec 31 13:20:32 2020] PM: suspend entry (deep) [Thu Dec 31 13:20:32 2020] Filesystems sync: 0.016 seconds [Thu Dec 31 13:20:36 2020] (NULL device *): firmware: direct-loading firmware intel/ibt-20-1-3.ddc [Thu Dec 31 13:20:36 2020] (NULL device *): firmware: direct-loading firmware iwlwifi-cc-a0-48.ucode [Thu Dec 31 13:20:36 2020] (NULL device *): firmware: direct-loading firmware intel/ibt-20-1-3.sfi [Thu Dec 31 13:20:36 2020] Freezing user space processes ... (elapsed 0.001 seconds) done. [Thu Dec 31 13:20:36 2020] OOM killer disabled. [Thu Dec 31 13:20:36 2020] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [Thu Dec 31 13:20:36 2020] printk: Suspending console(s) (use no_console_suspend to debug) [Thu Dec 31 13:20:36 2020] e1000e: EEE TX LPI TIMER: 0011 [Thu Dec 31 13:20:36 2020] xhci_hcd :06:00.0: WARN: xHC save state timeout [Thu Dec 31 13:20:36 2020] PM: suspend_common(): xhci_pci_suspend+0x0/0xd0 [xhci_pci] returns -110 [Thu Dec 31 13:20:36 2020] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 [usbcore] returns -110 [Thu Dec 31 13:20:36 2020] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns -110 [Thu Dec 31 13:20:36 2020] PM: Device :06:00.0 failed to suspend async: error -110 [Thu Dec 31 13:20:36 2020] sd 7:0:0:0: [sdd] Synchronizing SCSI cache [Thu Dec 31 13:20:36 2020] sd 2:0:0:0: [sda] Synchronizing SCSI cache [Thu Dec 31 13:20:36 2020] sd 6:0:0:0: [sdc] Synchronizing SCSI cache [Thu Dec 31 13:20:36 2020] sd 5:0:0:0: [sdb] Synchronizing SCSI cache [Thu Dec 31 13:20:36 2020] sd 5:0:0:0: [sdb] Stopping disk [Thu Dec 31 13:20:36 2020] sd 6:0:0:0: [sdc] Stopping disk [Thu Dec 31 13:20:36 2020] sd 7:0:0:0: [sdd] Stopping disk [Thu Dec 31 13:20:36 2020] sd 2:0:0:0: [sda] Stopping disk [Thu Dec 31 13:20:37 2020] PM: Some devices failed to suspend, or early wake event detected [Thu Dec 31 13:20:37 2020] sd 2:0:0:0: [sda] Starting disk [Thu Dec 31 13:20:37 2020] sd 5:0:0:0: [sdb] Starting disk [Thu Dec 31 13:20:37 2020] sd 6:0:0:0: [sdc] Starting disk [Thu Dec 31 13:20:37 2020] sd 7:0:0:0: [sdd] Starting disk [Thu Dec 31 13:20:37 2020] iwlwifi :05:00.0: Applying debug destination EXTERNAL_DRAM [Thu Dec 31 13:20:37 2020] iwlwifi :05:00.0: FW already configured (0) - re-configuring [Thu Dec 31 13:20:37 2020] nvme nvme0: 12/0/0 default/read/poll queues [Thu Dec 31 13:20:37 2020] OOM killer enabled. [Thu Dec 31 13:20:37 2020] Restarting tasks ... done. [Thu Dec 31 13:20:37 2020] PM: suspend exit [Thu Dec 31 13:20:37 2020] PM: suspend entry (s2idle) [Thu Dec 31 13:20:38 2020] Filesystems sync: 1.304 seconds [Thu Dec 31 13:20:39 2020] Freezing user space processes ... (elapsed 0.001 seconds) done. [Thu Dec 31 13:20:39 2020] OOM killer disabled. [Thu Dec 31 13:20:39 2020] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [Thu Dec 31 13:20:39 2020] printk: Suspending console(s) (use no_console_suspend to debug) [Thu Dec 31 13:20:39 2020] e1000e: EEE TX LPI TIMER: 0011 [Thu Dec 31 13:20:39 2020] xhci_hcd :06:00.0: WARN: xHC save state timeout [Thu Dec 31 13:20:39 2020] PM: suspend_common(): xhci_pci_suspend+0x0/0xd0 [xhci_pci] returns -110 [Thu Dec 31 13:20:39 2020] PM: pci_pm_suspend(): hcd_pci_suspend+0x0/0x30 [usbcore] returns -110 [Thu Dec 31 13:20:39 2020] PM: dpm_run_callback(): pci_pm_suspend+0x0/0x150 returns -110 [Thu Dec 31 13:20:39 2020] PM: Device :06:00.0 failed to suspend async: error -110 [Thu Dec 31 13:20:39 2020] sd 5:0:0:0: [sdb] Synchronizing SCSI cache [Thu Dec 31 13:20:39 2020] sd 6:0:0:0: [sdc] Synchronizing SCSI cache [Thu Dec 31 13:20:39 2020] sd 5:0:0:0: [sdb] Stopping disk [Thu Dec 31 13:20:39 2020] sd 6:0:0:0: [sdc] Stopping disk [Thu Dec 31 13:20:39 2020] sd 7:0:0:0: [sdd] Synchronizing SCSI cache [Thu Dec 31 13:20:39 2020] sd 2:0:0:0: [sda] Synchronizing SCSI cache [Thu Dec 31 13:20:39 2020] sd 7:0:0:0: [sdd] Stopping disk [Thu Dec 31 13:20:39 2020] sd 2:0:0:0: [sda] Stopping disk [Thu Dec 31 13:20:39 2020] PM: Some devices failed to suspend, or early wake event detected [Thu Dec 31 13:20:39 2020] sd 2:0:0:0: [sda] Starting disk [Thu Dec 31 13:20:39 2020] sd 5:0:0:0: [sdb] Starting disk [Thu Dec 31 13:20:39 2020] sd 6:0:0:0: [sdc] Starting disk [Thu Dec 31 13:20:39 2020] sd 7:0:0:0: [sdd] Starting disk [Thu Dec 31 13:20:39 2020] iwlwifi :05:00.0: Applying debug destination EXTERNAL_DRAM [Thu Dec 31 13:20:39 2020] iwlwifi :05:00.0: FW already configured (0) - re-configuring [Thu Dec 31 13:20:39 2020] nvme nvme0: 12/0/0 default/read/poll queues [Thu Dec 31 13:20:40 2020] OOM killer enabled. [Thu Dec 31 13:20:40 2020] Restarting tasks ... done. [Thu
Bug#949064: policykit-1: configuration with files in /etc/polkit-1/localauthority.conf.d seems broken
This is huge. I would recommend raising up Severity
Bug#944219: synaptic: one-line diff window is unusable
I confirm bug still exists in synaptic 0.84.2 in debian.
Bug#895678: [kcron] users with utf8 charaters cannot save crontab
Package: kcron Version: 4:16.08.0-1 Severity: normal --- Please enter the report below this line. --- I have user-name with utf8 characters called "człowiek.backupu". First of all it is not displayed correctly in user names comboBox. Secondly when I try to save I have error saying that user is unknown. Attached screenshot. --- System information. --- Architecture: Kernel: Linux 4.14.0-0.bpo.3-amd64 Debian Release: 9.4 500 stretch download.docker.com 500 stable-updates httpredir.debian.org 500 stable security.debian.org 500 stable repo.vivaldi.com 500 stable ftp.icm.edu.pl 500 stable dl.google.com 100 stretch-backports ftp.de.debian.org --- Package information. --- Depends (Version) | Installed ==-+-=== kde-config-cron| 4:16.08.0-1 Package's Recommends field is empty. Package's Suggests field is empty.
Bug#834748: libreoffice-gtk3: Main menus overlap
On 2016-09-05, at 18:07:30 Rene Engelhard wrote: > Probably the default (adwaita) if you don't configure something. I have checked that with $ gtk-query-settings 2>/dev/null|grep gtk-theme-name It seems that I had gtk-theme-name: "Clearlooks-Phenix" So I changed it to gtk-theme-name: "Adwaita" in .config/gtk-3.0/settings.ini And it looks normally. So it seems that this is a problem with package clearlooks-phenix-theme. Could you please reassign this bug to this package. > Since you use icewm, why are you using -gtk3 at all? Did dou try with gtk2? > (libreoffice-gtk2, export SAL_USE_VCLPLUGIN=gtk) > Or even gen? (export SAL_USE_VCLPLUGIN=gen)? > > The "problem" here is that if you installed -gtk3 it immediately takes > precendence over "the rest". I installed it because I want it to look and behave like gtk3 application. That is probably the only reason it exists. > See e.g. https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=836531 but in > contrast to that bug we have no detection of icewm or some other "simple" > window managers and I am not sure we should remove gtk3 from the default > fallback list completely and add a new one for MATE/GNOME3 including it... Doesn't make much sense. It is mate/gnome that depends on gtk not the opposite. -- Pozdrowienia
Bug#836767: libreoffice-calc: Slow rendering of UI
Package: libreoffice-calc Version: 1:5.2.0-2 Severity: normal Dear Maintainer, I'm running libreoffice-calc 5.2.0-2 it is really slow on my machine. Opening new empty spreadsheet takes around 2seconds. I can see how each row is rendering, and how they appear one by one on screen one-by-one. My cpu is Xeon 4x3.1GHz, gfx-card GeForce GT 610. Other applications works smooth. I was trying default UI, gtk2, and gtk3 on each version rendering is similar slow -- Package-specific info: Experimental features enabled: false -- System Information: Debian Release: jessie/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 3.11-1-686-pae (SMP w/4 CPU cores) Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages libreoffice-calc depends on: ii coinor-libcbc3 2.8.12-1+b1 ii coinor-libcoinmp1v51.7.6+dfsg1-2 ii dpkg 1.17.24 ii libboost-filesystem1.61.0 1.61.0+dfsg-2.1 ii libboost-iostreams1.61.0 1.61.0+dfsg-2.1 ii libc6 2.23-4 ii libetonyek-0.1-1 0.1.6-2 ii libgcc11:5.2.1-14 ii libicu57 57.1-2 ii liblcms2-2 2.6-3+b3 ii libmwaw-0.3-3 0.3.8-1 ii libodfgen-0.1-10.1.6-1 ii liborcus-0.11-00.11.2-2+b1 ii libreoffice-base-core 1:5.2.0-2 ii libreoffice-core 1:5.2.0-2 ii librevenge-0.0-0 0.0.1-3 ii libstdc++6 6.1.1-12 ii libwps-0.4-4 0.4.3-3 ii libxml22.9.2+dfsg1-1+b1 ii lp-solve 5.5.0.13-7 ii uno-libs3 5.2.0-2 ii ure5.2.0-2 ii zlib1g 1:1.2.8.dfsg-1 libreoffice-calc recommends no packages. Versions of packages libreoffice-calc suggests: pn ocl-icd-libopencl1 Versions of packages libreoffice-core depends on: ii fontconfig2.11.0-6.3 ii fonts-opensymbol 2:102.3+LibO4.1.3-1 ii libboost-date-time1.61.0 1.61.0+dfsg-2.1 ii libc6 2.23-4 ii libcairo2 1.14.0-2.1 ii libclucene-contribs1v52.3.3.4-4.2 ii libclucene-core1v52.3.3.4-4.2 ii libcmis-0.5-5v5 0.5.1+git20160603-1 ii libcups2 1.7.2-1 ii libcurl3-gnutls 7.38.0-4 ii libdbus-1-3 1.10.10-1 ii libdbus-glib-1-2 0.100.2-1 ii libdconf1 0.24.0-2 ii libeot0 0.01-2 ii libexpat1 2.1.0-4 ii libexttextcat-2.0-0 3.4.4-1 ii libfontconfig12.11.0-2 ii libfreetype6 2.5.1-1 ii libgcc1 1:5.2.1-14 ii libgl1-mesa-glx [libgl1] 10.3.2-1+deb8u1 ii libglew1.13 1.13.0-2 ii libglib2.0-0 2.48.1-3 ii libgltf-0.0-0v5 0.0.2-4+b1 ii libglu1-mesa [libglu1]9.0.0-2 ii libgraphite2-31.3.8-1 ii libharfbuzz-icu0 1.2.7-1+b1 ii libharfbuzz0b 1.2.7-1+b1 ii libhunspell-1.4-0 1.4.1-2 ii libhyphen02.8.6-3 ii libice6 2:1.0.9-1+b1 ii libicu57 57.1-2 ii libjpeg62-turbo 1:1.3.1-11 ii liblangtag1 0.5.7-2 ii liblcms2-22.6-3+b3 ii libldap-2.4-2 2.4.31-1+nmu2+b1 ii libmythes-1.2-0 2:1.2.2-1 ii libneon27-gnutls 0.30.0-1 ii libnspr4 2:4.10.7-1 ii libnss3 2:3.17.2-1 ii libodfgen-0.1-1 0.1.6-1 ii libpcre3 2:8.35-3.3 ii libpng16-16 1.6.24-2 ii librdf0 1.0.17-1+b1 ii libreoffice-common1:5.2.0-2 ii librevenge-0.0-0 0.0.1-3 ii libsm62:1.2.1-2 ii libssl1.0.2 1.0.2h-1 ii libstdc++66.1.1-12 ii libx11-6 2:1.6.2-1 ii libxext6 2:1.3.2-1 ii libxinerama1 2:1.1.3-1 ii libxml2 2.9.2+dfsg1-1+b1 ii libxrandr22:1.5.0-1 ii libxrender1 1:0.9.8-1 ii libxslt1.11.1.28-2 ii uno-libs3 5.2.0-2 ii ure 5.2.0-2 ii zlib1g1:1.2.8.dfsg-1 Versions of packages libreoffice-core recommends: ii libpaper-utils 1.1.24+nmu2 -- debconf information: Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/^(.*?)(\\)?\${ <-- HERE ([^{}]+)}(.*)$/ at /usr/share/perl5/Debconf/Question.pm line 72. Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^}]+)}/ at /usr/share/perl5/Debconf/Config.pm line 30.
Bug#834748: libreoffice-gtk3: Main menus overlap
Package: libreoffice-gtk3 Version: 1:5.2.0-2 Severity: normal I installed libreoffice-gtk3 and all menu labels don't have any spacing between them. It is just one single line of text. Screenshot attached. -- System Information: Debian Release: jessie/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 3.11-1-686-pae (SMP w/4 CPU cores) Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages libreoffice-gtk3 depends on: ii dpkg 1.17.24 ii libatk1.0-0 2.16.0-2 ii libc6 2.23-4 ii libcairo-gobject2 1.14.0-2.1 ii libcairo2 1.14.0-2.1 ii libdbus-1-3 1.10.10-1 ii libdbus-glib-1-2 0.100.2-1 ii libgcc1 1:5.2.1-14 ii libgdk-pixbuf2.0-02.31.4-2 ii libgl1-mesa-glx [libgl1] 10.3.2-1+deb8u1 ii libglew1.13 1.13.0-2 ii libglib2.0-0 2.48.1-3 ii libglu1-mesa [libglu1]9.0.0-2 ii libgtk-3-03.20.7-1 ii libice6 2:1.0.9-1+b1 ii libpango-1.0-01.40.1-1 ii libpangocairo-1.0-0 1.40.1-1 ii libreoffice-core 1:5.2.0-2 ii libsm62:1.2.1-2 ii libstdc++66.1.1-12 ii libx11-6 2:1.6.2-1 ii libxext6 2:1.3.2-1 ii uno-libs3 5.2.0-2 ii ure 5.2.0-2 Versions of packages libreoffice-gtk3 recommends: ii libreoffice-style-tango 1:5.2.0-2 Versions of packages libreoffice-gtk3 suggests: pn libreofficekit-data -- debconf information: Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/^(.*?)(\\)?\${ <-- HERE ([^{}]+)}(.*)$/ at /usr/share/perl5/Debconf/Question.pm line 72. Unescaped left brace in regex is deprecated, passed through in regex; marked by <-- HERE in m/\${ <-- HERE ([^}]+)}/ at /usr/share/perl5/Debconf/Config.pm line 30.
Bug#763288: geeqie: almost no mouse or keyboard-response in fullscreen mode
In my opinion mouse wheel issue on fullscreen is not fixed in geeqie 1:1.2-3+b1. In previous version mouse wheel in fullscreen mode was changing images forward/backward. In current version it does nothing. Muse wheel works only if I hold CTRL and scroll mouse wheel, then it scrolls image - that is fine, but it is some other functionality. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#525954: kcron: missing binary to startup application
On 29-04-2009, at 07:23:09 Sune Vuorela wrote: kcmshell4 kcm_cron Oh. Thas great. Thanks for that. I think we should at least update or remove the maunal file /usr/share/man/man8/kcron.8.gz Yes. is gone in the packaging svn. Maybe it will be better just to update te command in the manual with the one You showed above. -- Regards. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#525954: kcron: missing binary to startup application
Package: kcron Version: 4:4.2.2-1 Severity: important The kcron doesn't have /usr/bin/kcron file neither /bin/kcron /usr/sbin/kcron etc... So it seems that there is no binary to lunch this application. However the manual kcron (8) still says such binary exists and how to use it. List of file in current kcron binary: dpkg -L kcron /. /usr /usr/share /usr/share/doc /usr/share/doc/kcron /usr/share/doc/kcron/README /usr/share/doc/kcron/AUTHORS /usr/share/doc/kcron/copyright /usr/share/doc/kcron/changelog.Debian.gz /usr/share/doc/kde4 /usr/share/doc/kde4/HTML /usr/share/doc/kde4/HTML/en /usr/share/doc/kde4/HTML/en/kcron /usr/share/doc/kde4/HTML/en/kcron/index.cache.bz2 /usr/share/doc/kde4/HTML/en/kcron/index.docbook /usr/share/doc/kde4/HTML/en/kcron/kcron.png /usr/share/doc/kde4/HTML/en/kcron/kcronstart.png /usr/share/doc/kde4/HTML/en/kcron/newtask.png /usr/share/doc/kde4/HTML/en/kcron/newvariable.png /usr/share/doc/kde4/HTML/en/kcron/print.png /usr/share/man /usr/share/man/man8 /usr/share/man/man8/kcron.8.gz /usr/share/kde4 /usr/share/kde4/services /usr/share/kde4/services/kcm_cron.desktop /usr/lib /usr/lib/kde4 /usr/lib/kde4/kcm_cron.so /usr/share/doc/kde4/HTML/en/kcron/common -- System Information: Debian Release: squeeze/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-1-686 (SMP w/2 CPU cores) Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages kcron depends on: ii kdebase-runtime 4:4.2.2-1 runtime components from the offici ii kdelibs5 4:4.2.2-2 core libraries for all KDE 4 appli ii libc6 2.9-6 GNU C Library: Shared libraries ii libqtcore44.5.1-1Qt 4 core module ii libqtgui4 4.5.1-1Qt 4 GUI module ii libstdc++64.3.3-3The GNU Standard C++ Library v3 kcron recommends no packages. Versions of packages kcron suggests: ii khelpce 4:4.0.0.really.3.5.9.dfsg.1-2+b1 help center for KDE -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#525954: kcron: missing binary to startup application
Dnia 28-04-2009 (wtorek) o 08:48:15 Sune Vuorela napisał(a): On Tuesday 28 April 2009 08:21:09 Emil Nowak wrote: Package: kcron Version: 4:4.2.2-1 Severity: important The kcron doesn't have /usr/bin/kcron file neither /bin/kcron /usr/sbin/kcron etc... /usr/share/kde4/services/kcm_cron.desktop /usr/lib/kde4/kcm_cron.so It is a module in systemsettings (advanced task scheduler) But I don't use KDE, and so I don't have the systemsettings and advanced and stuff. I was always launching kcron from command line. So now it is not possible? I think we should at least update or remove the maunal file /usr/share/man/man8/kcron.8.gz -- Regards. -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#463682: x11-xserver-utils: xmodmap defalt preferences file is not loaded at startup
On 03-02-2008, at 16:44:42 Brice Goglin wrote: The customization occured after you logged in, right? (which means: your custom keys didn't work in GDM/KDM?) I don't know - I never needed those keys in kdm/gdm screen. Yes, I don't see how this could have ever worked for you. Looking at a Etch system, I can't find anything related to Xmodmap in the scripts that are loaded when opening a new session. Are you sure you weren't running xmodmap manually in your .xsession file or so? Or maybe you add something in /etc/X11/Xsession ? It's hard to say - this system was installed 5 or 7 years ago. Maybe I modified some Xsession script few years ago and I don't remember that. If you think ~/.Xmodmap should not be loaded automatically please close this bug. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#463682: x11-xserver-utils: xmodmap defalt preferences file is not loaded at startup
Package: x11-xserver-utils Version: 7.3+2 Severity: normal I always had a mapping for my custom keys in ~/.Xmodmap and every time I started Xserver using startx or GDM or KDM all my customized keyboard keys were working perfectly. Few x11-server versions ago (I don't remember extracly which one) It stopped working. I just read manual page for xmodmap (1) and it mentions file named .xmodmaprc. I made a copy of my old .Xmodmap with new name (.xmodmaprc) but after restarting Xserver nothing happend. I know that manual doesn't say that it will load such configuration automatically. Maybe some xinit-scripts should do this - so maybe this bug should be reassigned to something else. Anyway the point is: That it was working and now it doesn't. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.22-3-686-bigmem (SMP w/1 CPU core) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Shell: /bin/sh linked to /bin/bash Versions of packages x11-xserver-utils depends on: ii cpp 4:4.2.2-1 The GNU C preprocessor (cpp) ii libc6 2.7-5 GNU C Library: Shared libraries ii libice6 2:1.0.4-1 X11 Inter-Client Exchange library ii libsm62:1.0.3-1 X11 Session Management library ii libx11-6 2:1.0.3-7 X11 client-side library ii libxau6 1:1.0.3-2 X11 authorisation library ii libxaw7 2:1.0.4-1 X11 Athena Widget library ii libxext6 1:1.0.3-2 X11 miscellaneous extension librar ii libxi62:1.1.3-1 X11 Input extension library ii libxmu6 1:1.0.3-1 X11 miscellaneous utility library ii libxmuu1 1:1.0.3-1 X11 miscellaneous micro-utility li ii libxrandr22:1.2.2-1 X11 RandR extension library ii libxrender1 1:0.9.4-1 X Rendering Extension client libra ii libxt61:1.0.5-2 X11 toolkit intrinsics library ii libxtrap6 1:1.0.0-4 X11 event trapping extension libra ii libxxf86misc1 1:1.0.1-2 X11 XFree86 miscellaneous extensio ii libxxf86vm1 1:1.0.1-2 X11 XFree86 video mode extension l ii x11-common1:7.3+10 X Window System (X.Org) infrastruc x11-xserver-utils recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#462694: gimp: changing layer opacity uses too much CPU power
Package: gimp Version: 2.4.3-1 Severity: normal If you make a copy of current layer and try to change opacity of it. You will notice that with version 2.4.3-1 this operation is much much slower that in 2.3.* version. I don't know how to measure it, but the difference is so big that you can simply see it by scrolling/changing opacity value. In my opinion it is like ~10 times slower that in 2.3 version. I have just downgraded to: gimp 2.3.19-1, and here it works great. So definitely this is not a gtk bug or sth. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.22-3-686-bigmem (SMP w/1 CPU core) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Shell: /bin/sh linked to /bin/bash Versions of packages gimp depends on: ii gimp-data 2.4.3-1 Data files for GIMP ii libaa1 1.4p5-30 ascii art library ii libart-2.0-22.3.19-3 Library of functions for 2D graphi ii libatk1.0-0 1.20.0-1 The ATK accessibility toolkit ii libc6 2.7-5GNU C Library: Shared libraries ii libcairo2 1.4.14-1 The Cairo 2D vector graphics libra ii libdbus-1-3 1.1.2-1 simple interprocess messaging syst ii libdbus-glib-1-20.74-1 simple interprocess messaging syst ii libexif12 0.6.16-2 library to parse EXIF files ii libfontconfig1 2.4.91-1 generic font configuration library ii libfreetype62.3.5-1+b1 FreeType 2 font engine, shared lib ii libgimp2.0 2.4.3-1 Libraries for the GNU Image Manipu ii libglib2.0-02.14.5-2 The GLib library of C routines ii libgtk2.0-0 2.12.5-2 The GTK+ graphical user interface ii libgtkhtml2-0 2.11.1-1 HTML rendering/editing library - r ii libhal1 0.5.10-2 Hardware Abstraction Layer - share ii libjpeg62 6b-13The Independent JPEG Group's JPEG ii liblcms11.16-5 Color management library ii libmng1 1.0.9-1 Multiple-image Network Graphics li ii libpango1.0-0 1.18.4-1 Layout and rendering of internatio ii libpng12-0 1.2.15~beta5-0 PNG library - runtime ii libpoppler-glib20.6.2-1 PDF rendering library (GLib-based ii librsvg2-2 2.18.2-1 SAX-based renderer library for SVG ii libtiff43.8.2-7 Tag Image File Format (TIFF) libra ii libwmf0.2-7 0.2.8.4-6Windows metafile conversion librar ii libx11-62:1.0.3-7X11 client-side library ii libxext61:1.0.3-2X11 miscellaneous extension librar ii libxmu6 1:1.0.3-1X11 miscellaneous utility library ii libxpm4 1:3.5.7-1X11 pixmap library ii zlib1g 1:1.2.3.3.dfsg-2 compression library - runtime Versions of packages gimp recommends: pn gimp-gnomevfs | gimp-libcurl none (no description available) pn gimp-python none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#442143: Application crashing
Steps to reproduce: 1. Right click on katapult tray icon 2. Select Configure Katapult from menu * crash -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#444967: katapult: crashes on settings and doesn't work (popup/launch)
I had the same problem, and as You siad: Removing ~/.kde/share/config/katapultrc fixes that. But of course old configuration files should crash katapult - it should be handled nicely. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#453480: postinst - Segmentation fault
On 03-12-2007, at 15:39:19 Aurelien Jarno wrote: Which debconf frontend are you using ? If you are using a graphical one, could you please retry with a text one? I was using KDE frontend after changeing it to text everything works. -- Pozdrowienia -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#453480: postinst - Segmentation fault
Package: libc6 Version: 2.7-2 Severity: important I had libc 2.6.1-2 when I'm trying to upgrade to 2.7-2. I have segfaut: Setting up libc6 (2.7-2) ... dpkg: error processing libc6 (--configure): subprocess post-installation script killed by signal (Segmentation fault) # dpkg -l libc6 iF libc6 2.7-2 # uname -a Linux galeon 2.6.22-3-686 #1 SMP Mon Oct 22 22:11:56 UTC 2007 i686 GNU/Linux -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#453480: postinst - Segmentation fault
On 29-11-2007 Aurelien Jarno wrote: Could you please edit /var/lib/dpkg/info/libc6.postinst and change '#!/bin/sh' into '#!/bin/sh -x'? Then run 'apt-get install -f' and send us the debugging output. Setting up libc6 (2.7-2) ... + set -e + export LC_ALL=C + LC_ALL=C + type=configure + preversion=2.6.1-2 + '[' configure = configure ']' + '[' -f /usr/share/debconf/confmodule ']' + . /usr/share/debconf/confmodule ++ '[' '!' '' ']' ++ PERL_DL_NONLAZY=1 ++ export PERL_DL_NONLAZY ++ '[' '' ']' ++ exec /usr/share/debconf/frontend /var/lib/dpkg/info/libc6.postinst configure 2.6.1-2 dpkg: error processing libc6 (--configure): subprocess post-installation script killed by signal (Segmentation fault) ~$ dpkg -S /usr/share/debconf/frontend debconf: /usr/share/debconf/frontend ~$ apt-cache policy debconf debconf: Installed: 1.5.17 Candidate: 1.5.17 Version table: *** 1.5.17 0 500 http://ftp.de.debian.org unstable/main Packages 100 /var/lib/dpkg/status ~$ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#451121: lilo-installer: doesn't show descriptive error messages
Package: lilo-installer Version: 1.25 I was trying to install lilo using current testing installer. I made a raid0 from my disks, and when I was trying to put lilo here Debian installer showed my error message sth. like this: Running lilo failed - error number 1. It hard to guess what it means. But in a syslog I have this: Nov 13 14:18:42 lilo-installer: Nov 13 14:18:42 lilo-installer: Fatal: Nov 13 14:18:42 lilo-installer: Only RAID1 devices are supported as boot devices Nov 13 14:18:42 lilo-installer: This message Only RAID1 devices are supported as boot devices should be displayed normally in installer GUI not just in syslog. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#451038: pgadmin3: cannot open files without dot in names for backup-restore
Package: pgadmin3 Version: 1.4.3-2.1 Severity: normal When you try to restore some database from backup file pgadmin3 pops up FileSelection dialog from gtk. I can choose here between showing *.backup or *.* files. The second filter howerver doesn't show all files. To show all files in this dialog there muste be * filter. Right now you cannot open files named: my-cool-backup, something coolDatabase... etc.. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.22-3-686 (SMP w/1 CPU core) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Shell: /bin/sh linked to /bin/bash Versions of packages pgadmin3 depends on: ii libc62.6.1-2 GNU C Library: Shared libraries ii libgcc1 1:4.2.2-3 GCC support library ii libpq5 8.2.5-1 PostgreSQL C client library ii libstdc++6 4.2.2-3 The GNU Standard C++ Library v3 ii libwxbase2.6-0 2.6.3.2.2-1 wxBase library (runtime) - non-GUI ii libwxgtk2.6-02.6.3.2.2-1 wxWidgets Cross-platform C++ GUI t ii pgadmin3-data1.4.3-2.1 graphical administration tool for Versions of packages pgadmin3 recommends: pn pgagent none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#451041: reportbug: tab completion for attachments doesn't work for filenames with spaces
Package: reportbug Version: 3.39 Severity: normal Reportbug stops completing if it finds some matching filename with spaces inside name. -- Package-specific info: ** Environment settings: INTERFACE=text ** /home/emil/.reportbugrc: reportbug_version 2.37 mode advanced ui text realname Emil Nowak email [EMAIL PROTECTED] smtphost poczta.o2.pl smtptls editor gvim -f smtpuser emil5 -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.22-3-686 (SMP w/1 CPU core) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Shell: /bin/sh linked to /bin/bash Versions of packages reportbug depends on: ii apt 0.7.9 Advanced front-end for dpkg ii python2.4.4-6An interactive high-level object-o ii python-central0.5.15 register and build utility for Pyt reportbug recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#451043: pgadmin3: cannot restore from plain backup
Package: pgadmin3 Version: 1.4.3-2.1 Severity: normal You can save backup in three types: Compress, Tar, and Plain. But You can restore only from first two types. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.22-3-686 (SMP w/1 CPU core) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Shell: /bin/sh linked to /bin/bash Versions of packages pgadmin3 depends on: ii libc62.6.1-2 GNU C Library: Shared libraries ii libgcc1 1:4.2.2-3 GCC support library ii libpq5 8.2.5-1 PostgreSQL C client library ii libstdc++6 4.2.2-3 The GNU Standard C++ Library v3 ii libwxbase2.6-0 2.6.3.2.2-1 wxBase library (runtime) - non-GUI ii libwxgtk2.6-02.6.3.2.2-1 wxWidgets Cross-platform C++ GUI t ii pgadmin3-data1.4.3-2.1 graphical administration tool for Versions of packages pgadmin3 recommends: pn pgagent none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#451044: pgadmin3: Enter key from num-pad doesn't save data in table-View
Package: pgadmin3 Version: 1.4.3-2.1 Severity: normal When you are editing some data in table normal big enter key saves data in edited cell and moves to next one. But if you hit enter key from num-pad then modifed data is not saved. Row seems to be modifed, cursor is moved to another cell, but nothing is acutally saved to database. IMHO Both enter keys should have the same functionality. If you wan't the numPad Enter to have 'cancel functionality' then viewed data should be reveterted to it's orignal state -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.22-3-686 (SMP w/1 CPU core) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Shell: /bin/sh linked to /bin/bash Versions of packages pgadmin3 depends on: ii libc62.6.1-2 GNU C Library: Shared libraries ii libgcc1 1:4.2.2-3 GCC support library ii libpq5 8.2.5-1 PostgreSQL C client library ii libstdc++6 4.2.2-3 The GNU Standard C++ Library v3 ii libwxbase2.6-0 2.6.3.2.2-1 wxBase library (runtime) - non-GUI ii libwxgtk2.6-02.6.3.2.2-1 wxWidgets Cross-platform C++ GUI t ii pgadmin3-data1.4.3-2.1 graphical administration tool for Versions of packages pgadmin3 recommends: pn pgagent none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#449537: x-ttcidfont-conf: update polish debconf translation
Package: x-ttcidfont-conf Version: 25.1 Severity: wishlist Tags: patch l10n updated polish debonf translation -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.22-3-686 (SMP w/1 CPU core) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Shell: /bin/sh linked to /bin/bash Versions of packages x-ttcidfont-conf depends on: ii cdebconf [debconf-2.0]0.125 Debian Configuration Management Sy ii debconf [debconf-2.0] 1.5.16 Debian configuration management sy ii defoma0.11.10Debian Font Manager -- automatic f ii xfonts-base 1:1.0.0-3 standard fonts for X ii xfonts-encodings 1:1.0.2-1 Encodings for X.Org fonts ii xutils1:7.3+3X Window System utility programs m x-ttcidfont-conf recommends no packages. -- debconf information excluded xttcidfont-pl.po.gz Description: GNU Zip compressed data
Bug#443797: [INTL:pl] Polish translation of menu sections
Package: menu Version: 2.1.35 Severity: wishlist Tags: l10n Here is updated polish transaltion for menu-sections -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.22-1-686 (SMP w/1 CPU core) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Shell: /bin/sh linked to /bin/bash Versions of packages menu depends on: ii dpkg 1.14.6 package maintenance system for Deb ii libc6 2.6.1-2GNU C Library: Shared libraries ii libgcc1 1:4.2.1-4 GCC support library ii libstdc++64.2.1-4The GNU Standard C++ Library v3 menu recommends no packages. -- no debconf information # Menu section translation # Copyright (C) 2003 # This file is distributed under the same license as the menu package. # Bill Allombert [EMAIL PROTECTED], 2003. # Polish translation: # Marcin Owsiany [EMAIL PROTECTED], 2003. # Emil Nowak [EMAIL PROTECTED], 2007. # msgid msgstr Project-Id-Version: menu-section 2.1.9-3\n POT-Creation-Date: 2007-07-04 15:27+0100\n PO-Revision-Date: 2007-09-24 09:05+0200\n Last-Translator: Emil Nowak [EMAIL PROTECTED]\n Language-Team: Polish\n MIME-Version: 1.0\n Content-Type: text/plain; charset=iso-8859-2\n Content-Transfer-Encoding: 8bit\n X-Generator: Gettext Translator 0.9\n #. First level entry #. Policy definition: Normal applications. This is a top-level #. Examples: section, do not put entries here. msgid Applications msgstr Aplikacje #. Second level entry under Applications #. Policy definition: Tools to aid people with disabilities or #. for machines lacking usual input devices. #. Examples: gok, yasr, dasher msgid Accessibility msgstr Dostêpno¶æ #. Second level entry under Applications #. Policy definition: Anything relating to HAM radio. #. Examples: baken, hamsoft, twlog msgid Amateur Radio msgstr Radio Amatorskie #. Second level entry under Applications #. Policy definition: Interactive database programs, collection #. managers, address books, bibliography tools, etc. #. Examples: gaby, alexandria, mdbtools msgid Data Management msgstr Zarz±dzanie Danymi #. Second level entry under Applications #. Policy definition: Editors, other than office word processors, #. for text-based information. #. Examples: ksubtile, nano, hexedit msgid Editors msgstr Edytory #. Second level entry under Applications #. Policy definition: Educational and training software. #. Examples: gtypist, gcompris, quiz msgid Education msgstr Edukacja #. Second level entry under Applications #. Policy definition: Software that allows you to run non-native #. software or more than one OS at a time. #. Examples: wine, dosemu, qemu msgid Emulators msgstr Emulatory #. Second level entry under Applications #. Policy definition: Tools for file management, archiving, #. searching, CD/DVD burning, backup, etc. #. Examples: file-roller, mc, baobab msgid File Management msgstr Zarz±dzanie Plikami #. Second level entry under Applications #. Policy definition: 2D and 3D graphics manipulation software. #. Examples: gimp, inkscape, imagemagick msgid Graphics msgstr Grafika #. Second level entry under Applications #. Policy definition: Software that allows you to interface #. with mobile devices (phones, PDAs, etc.). #. Examples: kandy, gnokii, gnome-pilot msgid Mobile Devices msgstr Urz±dzenia Przeno¶ne #. Second level entry under Applications #. Policy definition: Network related software. This is a three-level #. Examples: section, do not put entries directly here. msgid Network msgstr Sieæ #. Third level entry under Network #. Policy definition: Mail, USENET news, chat, instant messaging, #. IP telephony, video conferencing software, etc. #. Examples: xchat, gaim, mutt msgid Communication msgstr Komunikacja #. Third level entry under Network #. Policy definition: File transfer software such as download #. managers, FTP clients, P2P clients, etc. #. Examples: amule, gftp, d4x msgid File Transfer msgstr Przesy³anie Plików #. Third level entry under Network #. Policy definition: Network monitoring software. #. Examples: gip, ettercap, iptstate msgid Monitoring msgstr Monitorowanie #. Third level entry under Network #. Policy definition: Web browsers, tools for offline browsing, etc. #. Examples: elinks, epiphany-browser, webhttrack msgid Web Browsing msgstr #. Third level entry under Network #. Policy definition: Web feed (RSS, Atom, etc.) #. and podcast aggregators. #. Examples: akregator, kitty, liferea msgid Web News msgstr #. Second level entry under Applications #. Policy definition: Office suites, word processors, spreadsheets, #. CRM, ERP, financial sofware, etc. #. Examples: openoffice.org, tinyerp-client, gnucash msgid Office msgstr Biuro #. Second level entry under Applications #. Policy definition: IDEs, debuggers, etc. #. Examples: anjuta, gdb, eclipse msgid Programming msgstr Programowanie #. Second level
Bug#433195: libxmlrpc-c3-dev: libxmlrpc_cpp.so file is missing or xmlrpc-c-config is generating wrong ouput for linker
Package: libxmlrpc-c3-dev Version: 0.9.10-4 Severity: normal When you try to build example from /usr/share/doc/libxmlrpc-c3-dev/examples/meerkat-app-list.cc with linker flags as described in overview.txt: CLIENT_LIBS=`xmlrpc-c-config c++ libwww-client --libs` You will get a lot of undefined symbols meerkat-app-list.cc:(.text+0x149): undefined reference to `XmlRpcValue::makeStruct()' meerkat-app-list.cc:(.text+0x15f): undefined reference to `XmlRpcValue::makeInt(int)' [...] and so on... $ xmlrpc-c-config is generating -lxmlrpc_cpp flag but there is no /usr/lib/libxmlrpc_cpp.so file, and that's why it probably fails. You can always build it that way: $ g++ libwww-client --libs` meerkat-app-list.o /usr/lib/libxmlrpc_cpp.a -o test So I think that xmlrpc-c-config should not put this -lxmlrpc_cpp in LDFLAGS or there should be appropriate *.so library provided. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.18-4-686 (SMP w/1 CPU core) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Shell: /bin/sh linked to /bin/bash Versions of packages libxmlrpc-c3-dev depends on: ii libc6-dev 2.5-5 GNU C Library: Development Librari ii libwww-dev5.4.0-11 The W3C WWW library - development ii libxmlrpc-c3 0.9.10-4 A lightweight RPC library based on libxmlrpc-c3-dev recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#426366: postgresql-8.2: upper(), lower(), and ilike are broken on UNICODE databases
On 2007-07-06, at 21:34:52 Erwin Brandstetter wrote: Emil, are you sure you were connected to right database when running your tests? I have been having major problems with this bug in version pg 8.1.*, but I think it has been fixed in 8.2. Yes - it was the right database. See the results of my tests: Because your results were different I started to investigate problem on my postgres. Probably something was wrong main cluster. I made a backup of my databases, then removed postgress server with purge. Then I installed it once again, and recovered databases from backup. Now it works. This server was few times upgraded from 7.x version. So I guess something went wrong in pg_upgradecluster during one of previous upgrades. I will close this bug right now. Thanks for help. test=# select 'ı' ilike 'I'; ?column? -- f I think a better test for this is: testy= select 'ı' ilike upper('ı'); ?column? -- f (1 row) I don't know what is this i without a dot, but It seems for me like a bug. Maybe this 'ı' letter exists only in lowercase version?
Bug#431467: mysql-admin: trying to open gnome-www-browser instead of x-www-browser
Package: mysql-admin Version: 1.2.5rc-2 Severity: normal In Helath catagery in last tab we have button called Click here for more information. When I click it it try's to launch gnome-www-browser. I have the following message on txt-console when click this button: sh: gnome-www-browser: command not found I have checked it with: $ strings /usr/bin/mysql-admin |grep gnome and it seems to be hardcoded here. It should call x-www-browser instead of this. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.18-4-686 (SMP w/1 CPU core) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Shell: /bin/sh linked to /bin/bash Versions of packages mysql-admin depends on: ii libatk1.0-0 1.18.0-2 The ATK accessibility toolkit ii libc6 2.5-5GNU C Library: Shared libraries ii libcairo2 1.4.10-1 The Cairo 2D vector graphics libra ii libfontconfig1 2.4.2-1.2generic font configuration library ii libgcc1 1:4.2-20070627-1 GCC support library ii libglade2-0 1:2.6.1-1library to load .glade files at ru ii libglib2.0-02.12.12-1The GLib library of C routines ii libglibmm-2.4-1c2a 2.12.9-0.1 C++ wrapper for the GLib toolkit ( ii libgtk2.0-0 2.10.13-1The GTK+ graphical user interface ii libgtkmm-2.4-1c2a 1:2.10.10-0.1C++ wrappers for GTK+ 2.4 (shared ii libmysqlclient15off 5.0.41a-1MySQL database client library ii libpango1.0-0 1.16.4-1 Layout and rendering of internatio ii libpcre36.7-1Perl 5 Compatible Regular Expressi ii libsigc++-2.0-0c2a 2.0.17-2 type-safe Signal Framework for C++ ii libstdc++6 4.2-20070627-1 The GNU Standard C++ Library v3 ii libx11-62:1.0.3-5X11 client-side library ii libxcursor1 1:1.1.8-2X cursor management library ii libxext61:1.0.3-2X11 miscellaneous extension librar ii libxfixes3 1:4.0.3-2X11 miscellaneous 'fixes' extensio ii libxi6 1:1.0.1-3X11 Input extension library ii libxinerama11:1.0.2-1X11 Xinerama extension library ii libxml2 2.6.29.dfsg-1GNOME XML library ii libxrandr2 2:1.2.1-1X11 RandR extension library ii libxrender1 1:0.9.2-1X Rendering Extension client libra ii mysql-admin-common 1.2.5rc-2Architecture independent files for Versions of packages mysql-admin recommends: ii mysql-query-browser 1.2.5beta-3 Official GUI tool to query MySQL d -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#430288: xfce4-utils: xflock4 fails when there is no xlock installed
Package: xfce4-utils Version: 4.4.1-1 Severity: normal Wjen I try to use xflock4 it fails beacuse there is no xlock utility installed. ~$ xflock4 /usr/bin/xflock4: line 22: xscreensaver-command: command not found /usr/bin/xflock4: line 22: xlock: command not found ~$ So IMHO xfce4-utils should depend on xlock and xscreensaver -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.18-4-686 (SMP w/1 CPU core) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Shell: /bin/sh linked to /bin/bash Versions of packages xfce4-utils depends on: ii konsole [x-terminal-emula 4:3.5.7-1 X terminal emulator for KDE ii libatk1.0-0 1.18.0-2 The ATK accessibility toolkit ii libc6 2.5-5 GNU C Library: Shared libraries ii libcairo2 1.4.8-1The Cairo 2D vector graphics libra ii libfontconfig12.4.2-1.2 generic font configuration library ii libfreetype6 2.2.1-1FreeType 2 font engine, shared lib ii libglib2.0-0 2.12.12-1 The GLib library of C routines ii libgtk2.0-0 2.10.13-1 The GTK+ graphical user interface ii libpango1.0-0 1.16.4-1 Layout and rendering of internatio ii libpng12-01.2.15~beta5-0 PNG library - runtime ii libx11-6 2:1.0.3-5 X11 client-side library ii libxcursor1 1:1.1.8-2 X cursor management library ii libxext6 1:1.0.3-2 X11 miscellaneous extension librar ii libxfce4util4 4.4.1-1Utility functions library for Xfce ii libxfcegui4-4 4.4.1-1Basic GUI C functions for Xfce4 ii libxfixes31:4.0.3-2 X11 miscellaneous 'fixes' extensio ii libxi61:1.0.1-3 X11 Input extension library ii libxinerama1 1:1.0.2-1 X11 Xinerama extension library ii libxrandr22:1.2.1-1 X11 RandR extension library ii libxrender1 1:0.9.2-1 X Rendering Extension client libra ii mrxvt [x-terminal-emulato 0.5.2-2lightweight multi-tabbed X termina ii multi-gnome-terminal [x-t 1.6.2-13 Enhanced the GNOME Terminal ii powershell [x-terminal-em 0.9-8 powerful terminal emulator for GNO ii rxvt [x-terminal-emulator 1:2.6.4-10 VT102 terminal emulator for the X ii rxvt-unicode-lite [x-term 7.9-1 RXVT-like terminal emulator with b ii xfce4-terminal [x-termina 0.2.6-2Xfce terminal emulator ii xterm [x-terminal-emulato 226-1 X terminal emulator ii zlib1g1:1.2.3-13 compression library - runtime Versions of packages xfce4-utils recommends: ii thunar0.8.0-2File Manager for Xfce ii xfce4-panel 4.4.1-1The Xfce4 desktop environment pane pn xfwm4 none (no description available) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429804: gdmXnest show just the gey dotted screen instead of login screen
reopen 429804 stop On 2007-06-22, at 14:00:05 Josselin Mouette wrote: The correct command is gdmflexiserver --xnest. Ok so what is gdmXnest for? Why do we have this file in gdm packages if it is not useful? Even if gdmflexiserver --xnest is correct command it also doesn't work. It just shows message dialog: Cannot start new display The nested X server (Xnest) is not available, or GDM is badly configured. Please install the Xnest package in order to use the nested login. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#420072: xine menu not shown in fullscreen mode
Hello, I cannot reproduce this with current KDE (3.5.7-1) and current xine-ui (0.99.5-2). Maybe you had some special settings in kwin. Some auto-focus, and raise on focus and maybe something else... Maybe You should try creating new user, and then testing this bug on clean KDE configuration. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429804: gdmXnest show just the gey dotted screen instead of login screen
Package: gdm Version: 2.18.2-1 Severity: normal When I start gdmXnest I have just this black on white dots (default Xserver screen or whatever it is) [screenshot attached] Instead of login screen. I remember that few version ago it was working perfectly (something around half year ago). -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.22-rc4-686 (SMP w/1 CPU core) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Shell: /bin/sh linked to /bin/bash Versions of packages gdm depends on: ii adduser3.102 Add and remove users and groups ii cdebconf [debconf-2.0] 0.116 Debian Configuration Management Sy ii debconf [debconf-2.0] 1.5.13Debian configuration management sy ii gksu 1.9.4-1 graphical frontend to su ii icewm [x-window-manager] 1.2.30-1 wonderful Win95-OS/2-Motif-like wi ii icewm-experimental [x-wind 1.2.30-1 wonderful Win95-OS/2-Motif-like wi ii konsole [x-terminal-emulat 4:3.5.7-1 X terminal emulator for KDE ii kwin [x-window-manager]4:3.5.7-1 the KDE window manager ii libart-2.0-2 2.3.19-3 Library of functions for 2D graphi ii libatk1.0-01.18.0-2 The ATK accessibility toolkit ii libattr1 1:2.4.32-1.1 Extended attribute shared library ii libc6 2.5-5 GNU C Library: Shared libraries ii libcairo2 1.4.6-1 The Cairo 2D vector graphics libra ii libdbus-1-31.1.0-1 simple interprocess messaging syst ii libdbus-glib-1-2 0.73-2simple interprocess messaging syst ii libdmx11:1.0.2-2 X11 Distributed Multihead extensio ii libfontconfig1 2.4.2-1.2 generic font configuration library ii libglade2-01:2.6.0-2 library to load .glade files at ru ii libglib2.0-0 2.12.12-1 The GLib library of C routines ii libgnomecanvas2-0 2.14.0-2 A powerful object-oriented display ii libgtk2.0-02.10.13-1 The GTK+ graphical user interface ii libpam-modules 0.79-3Pluggable Authentication Modules f ii libpam-runtime 0.79-3Runtime support for the PAM librar ii libpam0g 0.79-3.2 Pluggable Authentication Modules l ii libpango1.0-0 1.16.4-1 Layout and rendering of internatio ii libpopt0 1.10-2lib for parsing cmdline parameters ii librsvg2-2 2.16.1-2 SAX-based renderer library for SVG ii librsvg2-common2.16.1-2 SAX-based renderer library for SVG ii libselinux12.0.15-2 SELinux shared libraries ii libwrap0 7.6.dbs-9 Wietse Venema's TCP wrappers libra ii libx11-6 2:1.0.3-5 X11 client-side library ii libxau61:1.0.3-2 X11 authorisation library ii libxcursor11:1.1.8-2 X cursor management library ii libxdmcp6 1:1.0.2-2 X11 Display Manager Control Protoc ii libxext6 1:1.0.3-2 X11 miscellaneous extension librar ii libxfixes3 1:4.0.3-2 X11 miscellaneous 'fixes' extensio ii libxi6 1:1.0.1-3 X11 Input extension library ii libxinerama1 1:1.0.2-1 X11 Xinerama extension library ii libxml22.6.29.dfsg-1 GNOME XML library ii libxrandr2 2:1.2.1-1 X11 RandR extension library ii libxrender11:0.9.2-1 X Rendering Extension client libra ii lsb-base 3.1-3 Linux Standard Base 3.1 init scrip ii metacity [x-window-manager 1:2.18.3-1A lightweight GTK2 based Window Ma ii mrxvt [x-terminal-emulator 0.5.2-2 lightweight multi-tabbed X termina ii multi-gnome-terminal [x-te 1.6.2-13 Enhanced the GNOME Terminal ii oroborus [x-window-manager 2.0.18A lightweight themeable windowmana ii powershell [x-terminal-emu 0.9-8 powerful terminal emulator for GNO ii rxvt [x-terminal-emulator] 1:2.6.4-10VT102 terminal emulator for the X ii rxvt-unicode-lite [x-termi 7.9-1 RXVT-like terminal emulator with b ii xbase-clients 1:7.2.ds2-2 miscellaneous X clients ii xfce4-terminal [x-terminal 0.2.6-2 Xfce terminal emulator ii xterm [x-terminal-emulator 226-1 X terminal emulator Versions of packages gdm recommends: ii dialog1.1-20070604-1 Displays user-friendly dialog boxe pn gdm-themesnone (no description available) ii whiptail 0.52.2-4 Displays user-friendly dialog boxe ii zenity2.18.2-1 Display graphical dialog boxes fro -- debconf information: gdm/daemon_name:
Bug#349952: gaim: Gaim is displaying wrong window name if you have tabs with Cyrlic names
Eduard Bloch wrote: please try using the a verdana font I always had ttf font, and changing it to veranda doesn't help here. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429233: dhelp lefts a lot of files in /usr/share/doc/*/.dhelp
Package: dhelp Severity: normal I had dhelp installed and after removing it I still have a lot of .dhelp files in /use/share/doc Package has benn removed and purged without any errors: ~$ dpkg --status dhelp Package: dhelp Status: purge ok not-installed Priority: optional Section: doc ~$ And now I have this files here ~$ find /usr/ -name .dhelp |wc -l 89 ~$ And those files do not belong to any package. ~$ dpkg -S /usr/share/doc/libgtkmm-2.4-doc/.dhelp dpkg: /usr/share/doc/libgtkmm-2.4-doc/.dhelp not found. ~$ First of all those files should be removed by some postrm script. And probably keeping this files here is against Filesystem Hierarchy Standard I guess they should be in some /var/cache or sth. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.22-rc4-686 (SMP w/1 CPU core) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Shell: /bin/sh linked to /bin/bash Versions of packages dhelp depends on: ii cdebconf [debconf-2.0]0.116 Debian Configuration Management Sy ii debconf [debconf-2.0] 1.5.13 Debian configuration management sy ii libc6 2.5-5 GNU C Library: Shared libraries ii libdb33.2.9+dfsg-0.1 Berkeley v3 Database Libraries [ru ii perl-modules 5.8.8-7Core Perl modules Versions of packages dhelp recommends: ii dillo [www-browser]0.8.5-4 Small and fast web browser ii iceape-browser [www-browse 1.1.2-1 Iceape Navigator (Internet browser ii iceweasel [www-browser]2.0.0.4-1 lightweight web browser based on M ii konqueror [www-browser]4:3.5.7-1 KDE's advanced file manager, web b ii links2 [www-browser] 2.1pre28-1Web browser running in both graphi ii opera [www-browser]9.10-20060616 The Opera Web Browser ii w3m [www-browser] 0.5.1-5 WWW browsable pager with excellent -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#428807: linux-image-2.6.21-1-powerpc: keyboard and touchpad doesn't work
When I boot up on 2.6.18 in /dev/input/ I have the following devices: by-path event0 event1 event2 event3 event4 event5 mice mouse0 mouse1 on kernels 2.6.18 I have just two devices here: mice uinput Is that normal? Probably it's not useful but anyway here is my cpuinfo. # cat /proc/cpuinfo processor : 0 cpu : 7447A, altivec supported clock : 1066.666000MHz revision: 0.1 (pvr 8003 0101) bogomips: 73.47 timebase: 18432000 platform: PowerMac machine : PowerBook6,5 motherboard : PowerBook6,5 MacRISC3 Power Macintosh detected as : 287 (iBook G4) pmac flags : 001b L2 cache: 512K unified pmac-generation : NewWorld -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#428807: linux-image-2.6.21-1-powerpc: keyboard and touchpad doesn't work
Package: linux-image-2.6.21-1-powerpc Version: 2.6.21-4 Severity: important After booting up on 2.6.21 keyboard and tuchpad doesn't work. I have few kernels, and last fully-working kernel is 2.6.18-4-powerpc. Simpliy rebooting on old kernel makes keyboard avalialble again. Attached kernel.log diff betweeen 2.6.18 (working keyboard), and 2.6.20 (not working). -- Package-specific info: -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: powerpc (ppc) Kernel: Linux 2.6.18-4-powerpc Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.21-1-powerpc depends on: ii initramfs-tools [linux-initr 0.87b tools for generating an initramfs ii mkvmlinuz33 create a kernel to boot a PowerPC ii module-init-tools3.3-pre11-1 tools for managing Linux kernel mo linux-image-2.6.21-1-powerpc recommends no packages. -- debconf information: shared/kernel-image/really-run-bootloader: true linux-image-2.6.21-1-powerpc/preinst/bootloader-initrd-2.6.21-1-powerpc: true linux-image-2.6.21-1-powerpc/prerm/removing-running-kernel-2.6.21-1-powerpc: true linux-image-2.6.21-1-powerpc/preinst/lilo-has-ramdisk: linux-image-2.6.21-1-powerpc/postinst/old-dir-initrd-link-2.6.21-1-powerpc: true linux-image-2.6.21-1-powerpc/postinst/depmod-error-initrd-2.6.21-1-powerpc: false linux-image-2.6.21-1-powerpc/postinst/old-system-map-link-2.6.21-1-powerpc: true linux-image-2.6.21-1-powerpc/preinst/elilo-initrd-2.6.21-1-powerpc: true linux-image-2.6.21-1-powerpc/postinst/bootloader-error-2.6.21-1-powerpc: linux-image-2.6.21-1-powerpc/preinst/abort-install-2.6.21-1-powerpc: linux-image-2.6.21-1-powerpc/postinst/create-kimage-link-2.6.21-1-powerpc: true linux-image-2.6.21-1-powerpc/preinst/overwriting-modules-2.6.21-1-powerpc: true linux-image-2.6.21-1-powerpc/postinst/bootloader-test-error-2.6.21-1-powerpc: linux-image-2.6.21-1-powerpc/preinst/initrd-2.6.21-1-powerpc: linux-image-2.6.21-1-powerpc/preinst/lilo-initrd-2.6.21-1-powerpc: true linux-image-2.6.21-1-powerpc/preinst/failed-to-move-modules-2.6.21-1-powerpc: linux-image-2.6.21-1-powerpc/preinst/abort-overwrite-2.6.21-1-powerpc: linux-image-2.6.21-1-powerpc/prerm/would-invalidate-boot-loader-2.6.21-1-powerpc: true linux-image-2.6.21-1-powerpc/postinst/depmod-error-2.6.21-1-powerpc: false linux-image-2.6.21-1-powerpc/postinst/kimage-is-a-directory: linux-image-2.6.21-1-powerpc/preinst/already-running-this-2.6.21-1-powerpc: linux-image-2.6.21-1-powerpc/postinst/old-initrd-link-2.6.21-1-powerpc: true --- kern.2.6.18-4.striped.log 2007-06-14 12:02:42.0 +0200 +++ kern.2.6.21.striped.log 2007-06-14 12:02:53.0 +0200 @@ -1,12 +1,12 @@ klogd 1.4.1#17.2, log source = /proc/kmsg started. -Inspecting /boot/System.map-2.6.18-4-powerpc -Loaded 23099 symbols from /boot/System.map-2.6.18-4-powerpc. -Symbols match kernel version 2.6.18. +Inspecting /boot/System.map-2.6.21-1-powerpc +Loaded 24453 symbols from /boot/System.map-2.6.21-1-powerpc. +Symbols match kernel version 2.6.21. No module symbols loaded - kernel modules not enabled. Using PowerMac machine description Total memory = 256MB; using 512kB for hash table (at cff8) -Linux version 2.6.18-4-powerpc (Debian 2.6.18.dfsg.1-11) ([EMAIL PROTECTED]) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Wed Feb 21 13:39:54 CET 2007 -Found initrd at 0xc190:0xc1e1a000 +Linux version 2.6.21-1-powerpc (Debian 2.6.21-4) ([EMAIL PROTECTED]) (gcc version 4.1.3 20070518 (prerelease) (Debian 4.1.2-8)) #1 Sat May 26 14:30:26 CEST 2007 +Found initrd at 0xc190:0xc1eb1000 Found UniNorth memory controller host bridge @ 0xf800 revision: 0xd2 Mapped at 0xfdfc Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf4 @@ -14,6 +14,7 @@ PowerMac motherboard: iBook G4 via-pmu: Server Mode is disabled PMU driver v2 initialized for Core99, firmware: 0c +Entering add_active_range(0, 0, 65536) 0 entries of 256 used Found UniNorth PCI host bridge at 0xf000. Firmware bus number: 0-0 Found UniNorth PCI host bridge at 0xf200. Firmware bus number: 0-0 Found UniNorth PCI host bridge at 0xf400. Firmware bus number: 0-0 @@ -25,14 +26,24 @@ nvram: NR partition at 0x1120 Top of RAM: 0x1000, Total RAM: 0x1000 Memory hole size: 0MB +Zone PFN ranges: + DMA 0 -65536 + Normal 65536 -65536 + HighMem 65536 -65536 +early_node_map[1] active PFN ranges +0:0 -65536 On node 0 totalpages: 65536 - DMA zone: 65536 pages, LIFO batch:15 -Built 1 zonelists. Total pages: 65536 + DMA zone: 512 pages used for memmap + DMA zone: 0 pages reserved + DMA zone: 65024 pages, LIFO batch:15 + Normal zone: 0 pages used for memmap + HighMem zone: 0 pages used for memmap +Built 1 zonelists.
Bug#428807: linux-image-2.6.21-1-powerpc: keyboard and touchpad doesn't work
On 2007-06-14, at 12:50:42 maximilian attems wrote: please test trunk 2.6.22~rc4, see apt lines on - http://wiki.debian.org/DebianKernel I still have the same problem with this 2.6.22-rc4. -- Pozdrowienia -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#428807: linux-image-2.6.21-1-powerpc: keyboard and touchpad doesn't work
After booting up, and ssh'ing from other machine I discovered that 2.6.18 (one with working keyboard) has two additional modules loaded: usbcore and ohci_hcd. In config-2.6.21-1-powerpc those modules are marked as Y, so I guess this is not a problem here. I was trying manually loading and unloading every module from drivers/input, but it doesn't help Usb keyboard doesn't work, but after connecting it there is some response in kernel.log : usb 3-1: new low speed USB device using ohci_hcd and address 7 : usb 3-1: configuration #1 chosen from 1 choice : input: HID 046a:0013 as /class/input/input3 : input: USB HID v1.10 Keyboard [HID 046a:0013] on usb-0001:10:1b.1-1 : input: HID 046a:0013 as /class/input/input4 : input: USB HID v1.10 Device [HID 046a:0013] on usb-0001:10:1b.1-1 other usb-devices like mp3-player are working correctly on this kernel. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#428807: linux-image-2.6.21-1-powerpc: keyboard and touchpad doesn't work
On 2007-06-14, at 13:33:49 maximilian attems wrote: I still have the same problem with this 2.6.22-rc4. hmm ok. did you report on the debian powerpc mailinglist, there are upstream dev around there? Ok, I will try this mailing list. -- thanks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#382669: gconf2: maintainer scripts introduce new dependencies
tags 384660 patch thanks I wrote this gconf-schemas as a shell script. It looks very similar as Your python version so I guess it will be equally maitainable. gconf-schemas Description: Binary data
Bug#382669: gconf2: maintainer scripts introduce new dependencies
On 2007-06-14, at 19:16:08 Josselin Mouette wrote: Thanks. It looks fine apart from some small issues like the is_absolute function. what's wrong with that? I'm keeping it around for the moment, but I don't see much point in replacing the current gconf-schemas without replacing update-gconf-defaults as well. arghh... there is another script. I will try to do this later. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#426366: postgresql-8.2: upper(), lower(), and ilike are broken on UNICODE databases
Package: postgresql-8.2 Version: 8.2.4-1 Severity: normal When I try to use upper(), lower(), or ILIKE on UNICODE databases results are incorrect. For example: testy-utf=# select upper('Żółć'), lower('Żółć'); upper | lower ---+--- ūãłć | (1 row) And now the same thing on database with LATIN2 encoding (here we have correct results): testy=# select upper('Żółć'), lower('Żółć'); upper | lower ---+--- ŻÓŁĆ | żółć (1 row) I have the same problem when using psql command line utility, and pgadmin3 and JDBC driver. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.18-4-686 (SMP w/1 CPU core) Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages postgresql-8.2 depends on: ii libc62.5-5 GNU C Library: Shared libraries ii libcomer 1.39+1.40-WIP-2007.04.07+dfsg-2 common error description library ii libkrb53 1.6.dfsg.1-2MIT Kerberos runtime libraries ii libpam0g 0.79-3.2Pluggable Authentication Modules l ii libpq5 8.2.4-1 PostgreSQL C client library ii libssl0. 0.9.8e-4SSL shared libraries ii postgres 8.2.4-1 front-end programs for PostgreSQL ii postgres 75 manager for PostgreSQL database cl ii tzdata 2007f-1 time zone and daylight-saving time postgresql-8.2 recommends no packages. -- no debconf information
Bug#424646: python-central: It leaves some files after uninstalling
Package: python-central Version: 0.5.13-0.1 Severity: normal I have removed python-central package with purging and apt reported that one directory was not deleted. With python-central removed I still have it's files on my disk: $ ls /usr/share/pycentral-data pyversions.pyc -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#421294: libgloox-dev: linker options in cflags
Package: libgloox-dev Version: 0.8.6~sic-1 Severity: normal Right now cflags output of pkg-config has linker options $ pkg-config --cflags gloox -Wall -g -O2 -Wl,-z,defs this -Wl,-z,defs should be moved to --libs IMHO -Wall -g -O2 should be removed from here. -- System Information: Debian Release: lenny/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.18-4-686 (SMP w/1 CPU core) Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Shell: /bin/sh linked to /bin/bash Versions of packages libgloox-dev depends on: ii libgloox50.8.6~sic-1 C++ jabber/xmpp library ii libgnutls-dev1.6.2-1 the GNU TLS library - development ii libidn11-dev 0.6.5-1 Development files GNU libidn, impl ii libiksemel-dev 1.2-3 C library for the Jabber IM platfo libgloox-dev recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#365545: xbase-clients: Upgrading to Xorg7 make startx broken
On 2007-04-10, at 22:46:51 Brice Goglin wrote: Hi, About a years ago, you reported a bug to the Debian BTS regarding startx not working anymore after an upgrade to Xorg 7. Did you reproduce this problem recently? With Xorg/Etch? If not, I will close this bug in the next weeks. I can't reproduce this on current SID. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#359985: Debian bug follow up (Re: bug 359985)
On 2007-04-05 Sven Arvidsson wrote: This is a follow up to Debian bug 359985. See http://bugs.debian.org/359985 Hi, Does this bug still happen with gtk2-engines version 1:2.8.2-1 (or later) on an up to date Etch system? I don't have Etch, but I can still reproduce that on SID with: gtk2-engines 1:2.8.2-1 gtk-smooth-themes 0.5.8-2.1 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#346174: Debian bug follow up (Re: bug 346174)
On 2007-04-05 Sven Arvidsson wrote: This is a follow up to Debian bug 346174. See http://bugs.debian.org/346174 Hi, Does this bug still happen with gtk2-engines version 1:2.8.2-1 (or later) on an up to date Etch system? I don't have Etch, but I can still reproduce that on SID with: gtk2-engines 1:2.8.2-1 gtk-smooth-themes 0.5.8-2.1 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#416437: dpkg-dev: dpkg-buildpackage asks for key passphrase after displaying help
On 2007-03-28, at 03:32:18 Guillem Jover wrote: tag 416437 unreproducible moreinfo [...] It just came to my mind that you might have dpkg-cross installed, which diverts that file. :-/ Ahh.. Yes I have dpkg-cross installed, and after removing it dpkg-buildpackage works normally. Maybe this bugreport should be reassigned to dpkg-cross ? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#416437: dpkg-dev: dpkg-buildpackage asks for key passphrase after displaying help
Package: dpkg-dev Version: 1.13.25 Severity: minor When you try --help switch you will get something like this: $ dpkg-buildpackage --help Usage: dpkg-buildpackage [options ...] Options: -rgain-root-command [...] You need a passphrase to unlock the secret key for user ... [...] Of curse this question about passphrase for gpg key is not useful here. And btw: It would be nice If we could see help output when current dir!=sources dir. Now when I try to see help, and my current directory is home dir dpkg-builpackage displays only this warning: ~$ dpkg-buildpackage --help dpkg-parsechangelog: error: cannot open debian/changelog to find format: No such file or directory dpkg-buildpackage: cannot determine name of current package ~$ I would be nice to see help messages in every directory. -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-4-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages dpkg-dev depends on: ii binutils 2.17-1 The GNU assembler, linker and bina ii cpio 2.6-17 GNU cpio -- a program to manage ar ii dpkg 1.13.25package maintenance system for Deb ii make 3.81-2 The GNU version of the make util ii patch 2.5.9-4Apply a diff file to an original ii perl [perl5] 5.8.8-6.1 Larry Wall's Practical Extraction ii perl-modules 5.8.8-6.1 Core Perl modules Versions of packages dpkg-dev recommends: ii bzip2 1.0.3-4high-quality block-sorting file co ii gcc [c-compiler] 4:4.1.1-15 The GNU C compiler ii gcc-3.3 [c-compiler] 1:3.3.6-13 The GNU C compiler ii gcc-3.4 [c-compiler] 3.4.6-5The GNU C compiler ii gcc-4.0 [c-compiler] 4.0.3-1The GNU C compiler ii gcc-4.1 [c-compiler] 4.1.1-21 The GNU C compiler -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#351240: #376497 fixed in 0.60.5-1. #351240 seems fixed too [libgtkspell0: crashes when you call popup menu on word written in Cyrlic]
On 2007-02-20 Agustin Martin wrote: Emil, can you confirm if #351240 is also gone for you when using unstable aspell-0.60.5? Yupp. This bug never occurs when using aspell-0.60.5. It seems to be fixed now. Thanks. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#409877: multi-gnome-terminal: Control PageUp/PageDown characters are not recognized inside vim
On 2007-02-05. at 22:48:09 Kamaraju Kusumanchi wrote: Usually one can traverse across these tabs using Control-PageUp, Control-PgDown keys. These two keys work perfectly in konsole, xterm. However they do not seem to work in multi-gnome-terminal. Having this functionality would be tremendously useful for keyboard junkies. I just want to add some information to this bugreport: Those key combinations don't work only for vim. You can use ctrl+up/down in other console applications (MC is good example). If you press ctrl+pageup in vim in MGT it acts like it was plain PagUp -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#405028: libglib2.0-doc: g_key_file_set_string_list function arguments are different in header and different in documentation
Package: libglib2.0-doc Version: 2.12.6-1 Severity: normal When browsing documenatation in devhelp the g_key_file_set_string_list function look like this: void g_key_file_set_string_list(GKeyFile *key_file, const gchar *group_name, const gchar *key); it is in file: file://localhost/usr/share/gtk-doc/html/glib/glib-Key-value-file-parser.html#g-key-file-set-string-list but in /usr/include/glib-2.0/glib/gkeyfile.h it is different: void g_key_file_set_string_list(GKeyFile *key_file, const gchar *group_name, const gchar *key, const gchar *const list[], gsize length); -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-3-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages libglib2.0-doc depends on: ii dillo [www-browser]0.8.5-4 Small and fast web browser ii iceweasel [www-browser 2.0+dfsg-1lightweight web browser based on M ii konqueror [www-browser 4:3.5.5a.dfsg.1-2 KDE's advanced file manager, web b ii links2 [www-browser] 2.1pre26-4Web browser running in both graphi ii mozilla-browser [www-b 2:1.7.13-0.1 The Mozilla Internet application s ii opera [www-browser]8.54-20060330.6 The Opera Web Browser ii w3m [www-browser] 0.5.1-5 WWW browsable pager with excellent libglib2.0-doc recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#402905: bmpx: unable to play music, empty audio system comboBox
Milosz Derezynski wrote: ... can you please check whether other audio apps are working/can play back sound This is the only audio application that doesn't work on my system. Ok please let's stay cool. Your last statement wasn't offensive (yet) in any way but i can already smell the well, everything else works well, so please fix your goddamn thing upcoming. It was just the simplest answer to your question. Can you please give me some example of non-offensive-smelling answer to this question? Also, i'm not going to ask you stuff further in case you're not willing to cooperate; i'm going to ask you stuff from now on on this bug and expect some reply to it; if you don't care about it (BMPx), which is a slight undertone in your last statement(s), then please say so now, otherwise: You know... It's hard to say If I care about BMPx: First I need to test application, compare it's features to other music players... Can you give more information about your system configuration? (Soundcard, etc?) here is lspci output: Creative Labs SB Live! EMU10k1 (rev 08) And it uses normal Alsa modules from 2.6.18 kernel. How are other apps configured to use ALSA? What is the device name (ALSA device name, like hw:1,0 or hw:0,0, etc), they use? in xine, xmms, BMP, audacious, mplayer alsa device is named default, but I can change it to hw:0,0 and they can still play music. There is also hw:0,2 and hw:0,3 - but there is no sound when playing with those devices. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#402905: bmpx: unable to play music, empty audio system comboBox
Milosz Derezynski wrote: In case other apps using ALSA still work, but BMPx doesn't find any ALSA cards/devices, then it's probably still a BMPx bug, can you please check whether other audio apps are working/can play back sound? This is the only audio application that doesn't work on my system. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#402905: bmpx: unable to play music, empty audio system comboBox
Package: bmpx Version: 0.36.0-1 Severity: normal I have just installed bmpx and It cannot play anything. In preferences-Audio-Configuration there is a ComboxBox named AudioSystem, but this combobox is empty. I guess this may be a problem. I use alsa, SBLive sound-card. -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-3-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages bmpx depends on: ii dbus 1.0.1-2 simple interprocess messaging syst ii fftw33.1.2-1 library for computing Fast Fourier ii hal 0.5.8.1-4 Hardware Abstraction Layer ii libasoun 1.0.13-1ALSA library ii libatk1. 1.12.2-1The ATK accessibility toolkit ii libboost 1.33.1-9regular expression library for C++ ii libc62.3.6-15GNU C Library: Shared libraries ii libcairo 1.2.4-4 The Cairo 2D vector graphics libra ii libcairo 0.6.0-4 C++ wrappers for Cairo (shared lib ii libcdpar 3a9.8-11Shared libraries for cdparanoia (r ii libcomer 1.39+1.40-WIP-2006.11.14+dfsg-1 common error description library ii libdbus- 0.94-2 simple interprocess messaging syst ii libdbus- 0.71-3 simple interprocess messaging syst ii libexpat 1.95.8-3XML parsing C library - runtime li ii libfontc 2.4.1-2 generic font configuration library ii libfreet 2.2.1-1 FreeType 2 font engine, shared lib ii libgamin 0.1.8-1 Client library for the gamin file ii libgcc1 1:4.1.1-13 GCC support library ii libglade 1:2.6.0-2 library to load .glade files at ru ii libglade 2.6.2-2 C++ wrappers for libglade2 (shared ii libglib2 2.12.4-2The GLib library of C routines ii libglibm 2.12.0-1C++ wrapper for the GLib toolkit ( ii libgstre 0.10.10-2 GStreamer libraries from the base ii libgstre 0.10.10-2 Core GStreamer libraries and eleme ii libgtk2. 2.8.20-3The GTK+ graphical user interface ii libgtkmm 1:2.8.8-1 C++ wrappers for GTK+ 2.4 (shared ii libhal-s 0.5.8.1-4 Hardware Abstraction Layer - share ii libhal1 0.5.8.1-4 Hardware Abstraction Layer - share ii libice6 1:1.0.1-2 X11 Inter-Client Exchange library ii libkrb53 1.4.4~beta1-1 MIT Kerberos runtime libraries ii libmusic 2.1.4-1 Second generation incarnation of t ii libneon2 0.25.5.dfsg-2 An HTTP and WebDAV client library ii libofa0 0.9.3-1 Library for acoustic fingerprintin ii libpango 1.14.8-2Layout and rendering of internatio ii libpng12 1.2.15~beta5-0 PNG library - runtime ii librsvg2 2.14.4-2SAX-based renderer library for SVG ii libsidpl 1.36.59-4 SID (MOS 6581) emulation library ii libsigc+ 2.0.16-3type-safe Signal Framework for C++ ii libsm6 1:1.0.0-4 X11 Session Management library ii libssl0. 0.9.8c-3SSL shared libraries ii libstart 0.8-2 library for program launch feedbac ii libstdc+ 4.1.1-13The GNU Standard C++ Library v3 ii libtag1c 1.4-4 TagLib Audio Meta-Data Library ii libx11-6 2:1.0.3-2 X11 client-side library ii libxcurs 1.1.7-4 X cursor management library ii libxext6 1:1.0.1-2 X11 miscellaneous extension librar ii libxfixe 1:4.0.1-4 X11 miscellaneous 'fixes' extensio ii libxi6 1:1.0.1-3 X11 Input extension library ii libxiner 1:1.0.1-4.1 X11 Xinerama extension library ii libxml2 2.6.27.dfsg-1 GNOME XML library ii libxrand 2:1.1.0.2-4 X11 RandR extension library ii libxrend 1:0.9.1-3 X Rendering Extension client libra ii zlib1g 1:1.2.3-13 compression library - runtime Versions of packages bmpx recommends: ii gamin 0.1.8-1File and directory monitoring syst pn gstreamer0.10-ffmpeg none (no description available) pn gstreamer0.10-plugins-bad none (no description available) pn gstreamer0.10-plugins-goodnone (no description available) pn gstreamer0.10-plugins-ugly
Bug#401706: segfault when no habak specified
Package: habak Version: 0.2.5-2 Severity: normal Tags: patch When you start habak with no habak (no -h* argument) for example: ~$ habak -mS Segmentation fault ~$ Habak is trying to render defualt habak (Image), but without allocating all needed structures. Attached patch fixes that issue. -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-2-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages habak depends on: ii libc6 2.3.6-15 GNU C Library: Shared libraries ii libimlib2 1.2.1-2powerful image loading and renderi ii libx11-6 2:1.0.3-2 X11 client-side library habak recommends no packages. -- no debconf information diff -ur habak-0.2.5.orig/src/habak.c habak-0.2.5/src/habak.c --- habak-0.2.5.orig/src/habak.c 2004-12-09 18:02:00.0 +0100 +++ habak-0.2.5/src/habak.c 2006-12-05 14:46:29.0 +0100 @@ -341,6 +341,7 @@ } /* Dobra, czas na postprocessing */ +if (!first_list_item) flush_habak(); current_list_item=first_list_item; do {
Bug#397489: gtimer: crashes at startup
On 2006-11-07, at 11:30:14 Russ Allbery wrote: It works fine for me on x86 and I think I tested the current build with AMD64 as well, so my guess is that this is a porting issue of some kind. If you could do that build with debugging symbols, that would be greatly appreciated. Running it under valgrind may also help; I think valgrind exists for PowerPC now. When I run gtimer from package in valgrid it doesn't crash. But more interesting happened when I recompiled gtimer with -g3 flag: It doesn't crash at all. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397489: gtimer: crashes at startup
Package: gtimer Version: 1.1.6-11 Severity: important I have just installed gtimer and it doesn't even start: ~$ gtimer *** glibc detected *** free(): invalid pointer: 0x1006ab78 *** Aborted The gdb output is not useful here. I will have to recompile it with debugging symbols, but anyway here it is: *** glibc detected *** free(): invalid pointer: 0x1006ab80 *** Program received signal SIGABRT, Aborted. 0x0f9d07bc in raise () from /lib/tls/libc.so.6 (gdb) bt #0 0x0f9d07bc in raise () from /lib/tls/libc.so.6 #1 0x0f9d22c0 in abort () from /lib/tls/libc.so.6 #2 0x0fa0af60 in __fsetlocking () from /lib/tls/libc.so.6 #3 0x0fa0af60 in __fsetlocking () from /lib/tls/libc.so.6 #4 0x0fa0af60 in __fsetlocking () from /lib/tls/libc.so.6 #5 0x0fa0af60 in __fsetlocking () from /lib/tls/libc.so.6 #6 0x0fa0af60 in __fsetlocking () from /lib/tls/libc.so.6 #7 0x0fa0af60 in __fsetlocking () from /lib/tls/libc.so.6 #8 0x0fa0af60 in __fsetlocking () from /lib/tls/libc.so.6 #9 0x0fa0af60 in __fsetlocking () from /lib/tls/libc.so.6 #10 0x0fa0af60 in __fsetlocking () from /lib/tls/libc.so.6 #11 0x0fa0af60 in __fsetlocking () from /lib/tls/libc.so.6 Previous frame inner to this frame (corrupt stack?) (gdb) -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: powerpc (ppc) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-1-powerpc Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Versions of packages gtimer depends on: ii libc62.3.6-10GNU C Library: Shared libraries ii libglib1.2 1.2.10-10.1 The GLib library of C routines ii libgtk1.21.2.10-18 The GIMP Toolkit set of widgets fo ii libx11-6 2:1.0.3-2 X11 client-side library ii libxext6 1:1.0.1-2 X11 miscellaneous extension librar ii libxi6 1:1.0.0-5 X11 Input extension library ii libxss1 1:1.0.1-4 X11 Screen Saver extension library gtimer recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#397299: linux-image-2.6.18-1-powerpc: package is not installabe due postinst fail
Package: linux-image-2.6.18-1-powerpc Version: 2.6.18-3 Severity: important When I try to install this linux-image, it fails on postinst script. Below you can see full apt output: Setting up linux-image-2.6.18-1-powerpc (2.6.18-3) ... Running depmod. Finding valid ramdisk creators. Using mkinitramfs-kpkg to build the ramdisk. Missing Required paramater 'Old' at /var/lib/dpkg/info/linux-image-2.6.18-1-powerpc.postinst line 393. dpkg: error processing linux-image-2.6.18-1-powerpc (--configure): subprocess post-installation script returned error exit status 2 Setting up python-cjkcodecs (1.1.1-2+b1) ... pycentral: pycentral pkginstall: python-cjkcodecs needs unavailable runtime (2.3) pycentral pkginstall: python-cjkcodecs needs unavailable runtime (2.3) dpkg: error processing python-cjkcodecs (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: linux-image-2.6.18-1-powerpc python-cjkcodecs E: Sub-process /usr/bin/dpkg returned an error code (1) -- System Information: Debian Release: 4.0 APT prefers unstable APT policy: (500, 'unstable') Architecture: powerpc (ppc) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-1-powerpc Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Versions of packages linux-image-2.6.18-1-powerpc depends on: ii initramfs-tools [linux-initra 0.60 tools for generating an initramfs ii mkvmlinuz 24 create a kernel to boot a PowerPC ii module-init-tools 3.2.2-2tools for managing Linux kernel mo linux-image-2.6.18-1-powerpc recommends no packages. -- debconf information: linux-image-2.6.18-1-powerpc/preinst/abort-overwrite-2.6.18-1-powerpc: shared/kernel-image/really-run-bootloader: true linux-image-2.6.18-1-powerpc/postinst/old-dir-initrd-link-2.6.18-1-powerpc: true linux-image-2.6.18-1-powerpc/postinst/kimage-is-a-directory: linux-image-2.6.18-1-powerpc/preinst/overwriting-modules-2.6.18-1-powerpc: true linux-image-2.6.18-1-powerpc/postinst/bootloader-test-error-2.6.18-1-powerpc: linux-image-2.6.18-1-powerpc/preinst/initrd-2.6.18-1-powerpc: linux-image-2.6.18-1-powerpc/preinst/bootloader-initrd-2.6.18-1-powerpc: true linux-image-2.6.18-1-powerpc/preinst/elilo-initrd-2.6.18-1-powerpc: true linux-image-2.6.18-1-powerpc/postinst/create-kimage-link-2.6.18-1-powerpc: true linux-image-2.6.18-1-powerpc/preinst/lilo-has-ramdisk: linux-image-2.6.18-1-powerpc/prerm/removing-running-kernel-2.6.18-1-powerpc: true linux-image-2.6.18-1-powerpc/postinst/old-system-map-link-2.6.18-1-powerpc: true linux-image-2.6.18-1-powerpc/preinst/lilo-initrd-2.6.18-1-powerpc: true linux-image-2.6.18-1-powerpc/preinst/failed-to-move-modules-2.6.18-1-powerpc: linux-image-2.6.18-1-powerpc/postinst/bootloader-error-2.6.18-1-powerpc: linux-image-2.6.18-1-powerpc/postinst/old-initrd-link-2.6.18-1-powerpc: true linux-image-2.6.18-1-powerpc/prerm/would-invalidate-boot-loader-2.6.18-1-powerpc: true linux-image-2.6.18-1-powerpc/postinst/depmod-error-2.6.18-1-powerpc: false linux-image-2.6.18-1-powerpc/preinst/abort-install-2.6.18-1-powerpc: linux-image-2.6.18-1-powerpc/preinst/already-running-this-2.6.18-1-powerpc: linux-image-2.6.18-1-powerpc/postinst/depmod-error-initrd-2.6.18-1-powerpc: false -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#382733: emacs-snapshot-gtk: changeing default font makes spaces and newlines appear as sqaures
On 2006-10-03 (Tue), at 21:00:09 Romain Francoise wrote: No response from the submitter; I hoped I will find some time to figure out how all those fonts work. Right now I don't know how to check which fonts are TTF, and xft and whatever else. So I can't answer your question :-/ I'll take this bug as a feature request for Xft/Freetype and close it since I don't keep this kind of bugs opened. Oki it might be Feature Request. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#389151: Ctrl+S/Ctrl+F - searching page context does nothing
Package: devhelp Version: 0.12-2 Severity: normal When I'm reading some page sometimes I need to search it context for specific string. In devhelp 0.12 this function doesn't work. I remember that it was working before (maybe in 0.11) there was something like Ctrl+F. There is Ctrl+S in Go-Search but it's for searching index files not current page content. I will start downgrading devhelp - it's getting worse with every new relase :-( -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#382733: emacs-snapshot-gtk: changeing default font makes spaces and newlines appear as sqaures
On 2006-09-10 (Sunday), at 19:49:20 Romain Francoise wrote: (set-default-font -*-freemono-*-r-*-*-*-*-*-*-*-*-*-*) and every font tryed so far has the same error. I guess this is because this font doesn't provide all the characters of the character set you're using. Does it work better with a full font description (no stars in the description)? My guess is that is probably because emacs this snapshot doesn't support XFT http://www.emacswiki.org/cgi-bin/wiki/XftGnuEmacs -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#379996: mpc123: segfault when you pass unsupported long argument
This segfault is caused by a wrong use of getopt_long() function. The third argument (longopts) should be terminated by zeros, but It wasn't. Attached patch pixes that bug.diff -ur mpc123-0.1.9+tla20060120.orig/mpc123.c mpc123-0.1.9+tla20060120/mpc123.c --- mpc123-0.1.9+tla20060120.orig/mpc123.c 2006-06-03 21:56:46.0 +0200 +++ mpc123-0.1.9+tla20060120/mpc123.c 2006-08-31 08:42:12.0 +0200 @@ -130,7 +130,8 @@ {random, ARG_NO, 0, 'Z'}, {shuffle, ARG_NO, 0, 'z'}, {help, ARG_NO, 0, 'h'}, -{version, ARG_NO, 0, 'V'} +{version, ARG_NO, 0, 'V'}, +{0, 0, 0, 0} }; int handled_signals[]={ SIGSEGV,/* mem problems */
Bug#385483: sylpheed-claws-gtk2-i18n: Not installable in Sid
On 2006-08-31 (Thu), at 14:04:39 Steve Langasek wrote: So, install sylpheed-claws-gtk2 2.5.0~rc2-2, as that's the current version? But It's not available on mirrors right now. Binary package of rc2-2 is only on http://incoming.debian.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#384469: (no subject)
On 2006-08-27 (Sun), at 20:56:09 Colin Leroy wrote: 1.9.100 is old as hell. what's keeping 2.4.0 from entering testing ? I think sc 2.4 in testing is waiting for libetapn and libetpan is only 8 days old. It must be 10 days old to go in. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#383034: libcairo2: every gtk app crashes when runs on remote Xsession
On 2006-08-27 (Sun), at 16:38:53 Dave Beckett wrote: Huh I should send this to bts first. that wasn't really helpful as it is some gtk application you wrote. Starting program: /home/emil/programing/C/gtk/fc I used this one because I hade debugging symbols enabled here Can you demonstrate this crashing with a standard debian gtk application? sure. And now gtk-theme-switch2 segfault attached. gtk-theme-switch2.ceash.gdb Description: Binary data
Bug#383034: libcairo2: every gtk app crashes when runs on remote Xsession
On 2006-08-27 (Sun), at 18:04:33 Dave Beckett wrote: So although I can't duplicate this failure, your callback is crazy. cairo_xlib_surface_get_display() is never called in cairo_surface_reference() and never has been. I checked cairo 1.2.2, 1.2.0 and 1.1.10. I don't know why it happens that way. Maybe this are some callback called asynchronously from different parts of gdk internals. Or maybe gdb is showing this in wrong way. At least I have libacairo from .deb package - I have just compared md5sum from libcairo.deb with my localcopy :-D I suggest you have some other corruption going on, outside cairo. Try valgrind or some other test, build debug libraries. Ok here comes the valgrind output. Surprisingly it seems to crash on something different. I will try to build *-dbg package valgrid.log.19862.gz Description: GNU Zip compressed data
Bug#383034: Acknowledgement (libcairo2: every gtk app crashes when runs on remote Xsession)
Here is gdb output with debbuging symbols in libcairoProgram received signal SIGSEGV, Segmentation fault. 0xa78831d9 in _cairo_xlib_surface_show_glyphs (abstract_dst=0x810ae80, op=CAIRO_OPERATOR_OVER, src_pattern=0xafcbb75c, glyphs=0x810ed48, num_glyphs=9, scaled_font=0x80f5748) at /home/emil/kariro-jebane/libcairo-1.2.4.orig/src/cairo-xlib-surface.c:2455 2455n[3] = d[0]; (gdb) bt #0 0xa78831d9 in _cairo_xlib_surface_show_glyphs (abstract_dst=0x810ae80, op=CAIRO_OPERATOR_OVER, src_pattern=0xafcbb75c, glyphs=0x810ed48, num_glyphs=9, scaled_font=0x80f5748) at /home/emil/kariro-jebane/libcairo-1.2.4.orig/src/cairo-xlib-surface.c:2455 #1 0xa78687a1 in _cairo_surface_show_glyphs (surface=0x810ae80, op=CAIRO_OPERATOR_OVER, source=0xafcbb870, glyphs=0x810ed48, num_glyphs=9, scaled_font=0x80f5748) at /home/emil/kariro-jebane/libcairo-1.2.4.orig/src/cairo-surface.c:1820 #2 0xa785cfcc in _cairo_gstate_show_glyphs (gstate=0x810ec00, glyphs=0xafcbb93c, num_glyphs=9) at /home/emil/kariro-jebane/libcairo-1.2.4.orig/src/cairo-gstate.c:1449 #3 0xa7857844 in cairo_show_glyphs (cr=0x80d70d8, glyphs=0x81a7000, num_glyphs=9) at /home/emil/kariro-jebane/libcairo-1.2.4.orig/src/cairo.c:2539 #4 0xa797d0e4 in pango_cairo_show_glyph_string () from /usr/lib/libpangocairo-1.0.so.0 #5 0xa7ba3495 in pango_renderer_draw_glyphs () from /usr/lib/libpango-1.0.so.0 #6 0xa7ba390d in pango_renderer_draw_layout_line () from /usr/lib/libpango-1.0.so.0 #7 0xa7ba3cbb in pango_renderer_draw_layout () from /usr/lib/libpango-1.0.so.0 #8 0xa797c222 in pango_cairo_show_layout () from /usr/lib/libpangocairo-1.0.so.0 #9 0xa7d62693 in gtk_entry_new () from /usr/lib/libgtk-x11-2.0.so.0 #10 0xa7dd5110 in _gtk_marshal_BOOLEAN__BOXED () from /usr/lib/libgtk-x11-2.0.so.0 #11 0xa7b515f9 in g_cclosure_new_swap () from /usr/lib/libgobject-2.0.so.0 #12 0xa7b51cb9 in g_closure_invoke () from /usr/lib/libgobject-2.0.so.0 #13 0xa7b62315 in g_signal_stop_emission () from /usr/lib/libgobject-2.0.so.0 #14 0xa7b631fe in g_signal_emit_valist () from /usr/lib/libgobject-2.0.so.0 #15 0xa7b637f9 in g_signal_emit () from /usr/lib/libgobject-2.0.so.0 #16 0xa7ebecc4 in gtk_widget_get_default_style () from /usr/lib/libgtk-x11-2.0.so.0 #17 0xa7dcfecf in gtk_main_do_event () from /usr/lib/libgtk-x11-2.0.so.0 #18 0xa7c53e00 in gdk_window_is_viewable () from /usr/lib/libgdk-x11-2.0.so.0 #19 0xa7c53faf in gdk_window_process_all_updates () from /usr/lib/libgdk-x11-2.0.so.0 #20 0xa7c54035 in gdk_window_process_all_updates () from /usr/lib/libgdk-x11-2.0.so.0 #21 0xa7adf7d1 in g_child_watch_add () from /usr/lib/libglib-2.0.so.0 #22 0xa7add1bc in g_main_context_dispatch () from /usr/lib/libglib-2.0.so.0 #23 0xa7ae064b in g_main_context_check () from /usr/lib/libglib-2.0.so.0 #24 0xa7ae09a7 in g_main_loop_run () from /usr/lib/libglib-2.0.so.0 #25 0xa7dd0141 in gtk_main () from /usr/lib/libgtk-x11-2.0.so.0 #26 0x0804d2ee in main () (gdb)
Bug#384660: Acknowledgement (xnc: expanding directories from .tar.gz, .tar.bz2, .deb archives doesn't work)
Okii So I figured out how it works. First we need to patch file in src/xsetup/files.tar.dir/data/* There are just definitions for tar, gzip, bzip how to extract archives. It can be fixed by attached patch afs_tar_patch.diff Then we have another problem those definitions are are stored in src/xsetup/sfiles.c file which is auto-generated. You need to call makeconfigdirs from this directory to regenerate sfiles.c Unfortunately shell script makeconfigdirs needs xnc-5.0.4/bin/data2c program, and this dependency is not handled bu autotools. So I make some workaround for this in debian/rules: First we build everything including src/helpers/* and we get - bin/data2c Then we regenerate sfiles.c, to get xnsetup, so we can finish building package. Attached in patch debian_rules.diff diff -ur xnc-5.0.4.orig/src/xsetup/files.tar.dir/data/xnc.afs.tar112 xnc-5.0.4/src/xsetup/files.tar.dir/data/xnc.afs.tar112 --- xnc-5.0.4.orig/src/xsetup/files.tar.dir/data/xnc.afs.tar112 2002-11-10 17:18:51.0 +0100 +++ xnc-5.0.4/src/xsetup/files.tar.dir/data/xnc.afs.tar112 2006-08-26 15:22:39.0 +0200 @@ -58,8 +58,8 @@ syntax: attributes word size date time name; list: bzip2 -c -d archive | tar -tvf -; extract: bzip2 -c -d archive | tar -xf -; -single_ex: bzip2 -c -d archive | tar -xf - file; -list_unpack: bzip2 -c -d archive | tar -xT file -f -; +single_ex: tar --wildcards -xf archive file; +list_unpack: tar --wildcards -xT file -f archive; single_create: tar -cf - file | bzip2 -c -f archive; multi_create: tar -cf - file | bzip2 -c -f archive; endsupport @@ -70,8 +70,8 @@ syntax: attributes word size date time name; list: gzip -c -f -d archive | tar -tvf -; extract: gzip -c -f -d archive | tar -xf -; -single_ex: gzip -c -f -d archive | tar -xf - file; -list_unpack: gzip -c -f -d archive | tar -xT file -f -; +single_ex: tar --wildcards -xf archive file; +list_unpack: tar --wildcards -xT file -f archive; single_create: tar -cf - file | gzip -c -f archive; multi_create: tar -cf - file | gzip -c -f archive; endsupport @@ -91,7 +91,7 @@ #syntax: attributes word size month day time year name; list: dpkg-deb -c archive; extract: dpkg-deb -x archive .; -single_ex: dpkg-deb --fsys-tarfile archive | tar xf - file; +single_ex: dpkg-deb --fsys-tarfile archive | tar --wildcards -xf - file; endsupport #Support for ARJ archives but use 'unarj' Tylko w xnc-5.0.4/src/xsetup: sfiles.tar diff -ur debian/rules debian.new/rules --- debian/rules 2006-08-27 01:31:42.0 +0200 +++ debian.new/rules 2006-08-27 01:25:03.0 +0200 @@ -33,9 +33,16 @@ dh_testdir # Add here commands to compile the package. + + # first we remove sfiles.c which is autogenerated file + -rm src/xsetup/sfiles.c + # then we build all binaries exept xncsetup + $(MAKE) + + # and now we can use bin/data2c tool to genereate sfiles.c + cd src/xsetup; ./makeconfigs + # and we build xnsetup which depends on sfiles.c $(MAKE) - #/usr/bin/docbook-to-man debian/xnc.sgml xnc.1 - touch build-stamp clean:
Bug#384621: [INTL:pl] Polish debconf translation
Package: msttcorefonts Version: 1.2 Severity: wishlist Tags: patch l10n Please add attched pl.po file pl.po.gz Description: GNU Zip compressed data
Bug#384620: [INTL:pl] Polish debconf translation
Package: x-ttcidfont-conf Version: 25 Severity: wishlist Tags: patch l10n Please add attched pl.po file pl.po.gz Description: GNU Zip compressed data
Bug#384660: xnc: expanding directories from .tar.gz, .tar.bz2, .deb archives doesn't work
Package: xnc Version: 5.0.4-2.1 Severity: normal to extract directory from tar archive xnc is using something like that: gzip -c -f -d /home/emil/examplearchive.tar.gz | tar -xf - exampledir/\\* It works for tar 1.15.1, but doesn't work fur current package in sid (tar 1.15.91-2). To make it working with this version of tar we need to add --wildcards argument. And after modyfing those three methods in ~/.xnc/xnc.afs: single_ex: bzip2 -c -d archive | tar --wildcards -xf - file; single_ex: gzip -c -f -d archive | tar --wildcards -xf - file; single_ex: dpkg-deb --fsys-tarfile archive | tar --wildcards -xf - file; it works again. However I don't know how to make those changes in upstream package. This ~/.xnc/afs.xnc is generated when you run xnc for the first time. and all files in xnc-5.0.4/other/xncafs* are different from those newly-generated file. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/dash Kernel: Linux 2.6.16-2-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages xnc depends on: ii libc6 2.3.6-15 GNU C Library: Shared libraries ii libgcc1 1:4.1.1-2 GCC support library ii libice6 1:1.0.0-3 X11 Inter-Client Exchange library ii libjpeg62 6b-11 The Independent JPEG Group's JPEG ii libpng12-01.2.8rel-5 PNG library - runtime ii libsm61:1.0.0-4 X11 Session Management library ii libstdc++64.1.1-2The GNU Standard C++ Library v3 ii libtiff4 3.8.2-2Tag Image File Format (TIFF) libra ii libx11-6 2:1.0.0-8 X11 client-side library ii libxext6 1:1.0.0-4 X11 miscellaneous extension librar ii zlib1g1:1.2.3-13 compression library - runtime xnc recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#374274: Cannot login to kdm after dist-upgrade
john znuck wrote: kdm.log Backtrace printout: Backtrace: 0: /usr/bin/X(xf86SigHandler+0x88) [0x80b8d98] 1: [0xe420] It seems, to be problem witch xserver-xorg or xserver-xorg-video-i810 package. Maybe you had some customized graphics settings in your Kde-Control center, and now new Xserver has some problems in using this settings. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#383034: libcairo2: every gtk app crashes when runs on remote Xsession
Package: libcairo2 Version: 1.2.2-1 Severity: normal I'm using ssh X11Forwarding to run applications remotely from other machines. As long as I remember it worked well. But with the current libairo every gtk application crashes on startup on cairo_xlib_surface_get_display(). When I downgrade to 1.2.0 everything works fine. Complete gdb backtrace attached. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-2-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages libcairo2 depends on: ii libc62.3.6-15GNU C Library: Shared libraries ii libfontconfig1 2.3.2-7 generic font configuration library ii libfreetype6 2.2.1-1 FreeType 2 font engine, shared lib ii libice6 1:1.0.0-3 X11 Inter-Client Exchange library ii libpng12-0 1.2.8rel-5 PNG library - runtime ii libsm6 1:1.0.0-1 X11 Session Management library ii libx11-6 2:1.0.0-6 X11 client-side library ii libxrender1 1:0.9.0.2-4 X Rendering Extension client libra ii zlib1g 1:1.2.3-13 compression library - runtime libcairo2 recommends no packages. -- no debconf information libcairo2 - remote crash.txt.gz Description: Binary data
Bug#382669: gconf2: maintainer scripts introduce new dependencies
Package: gconf2 Version: 2.14.0-4 Severity: normal Normally upstream package of gvonf2 doesn't depend on python. In all other distributions gconf2 also doesn't depend on python. But in debian we have gconf-schemas script which is written in python, and so all programs that need gconf now automatically depend on python. I'm not sure but IMHO such new dependencies should be against debian policy. What if libc6 guys decide to write some post-install script-helper with JavaBeanShell ? -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-2-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages gconf2 depends on: ii gconf2-common 2.14.0-4 GNOME configuration database syste ii libc6 2.3.6-15 GNU C Library: Shared libraries ii libgconf2-42.14.0-4 GNOME configuration database syste ii libglib2.0-0 2.10.3-1 The GLib library of C routines ii libpopt0 1.10-2lib for parsing cmdline parameters ii libxml22.6.26.dfsg-2 GNOME XML library ii psmisc 22.3-1Utilities that use the proc filesy ii python 2.3.5-11 An interactive high-level object-o Versions of packages gconf2 recommends: ii libgtk2.0-0 2.8.18-1 The GTK+ graphical user interface -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#354188: Closing bug
On 2006-08-05 (saturday), at 18:47:11 Reinhard Tartler wrote: Version: 1.1.1+cvs20060624-1 FLAC with vorbis comments should be supported since 1.1.2. Have you tested it with this sample file I send to this BugReport? : http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=354188;msg=24 I have 1.1.2 and It still doesn't work. -- Cheers. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#381945: pan: spellcheker is not working in 0.106
Package: pan Version: 0.106-1 Severity: normal When composing new post spellcheker is not underlining mispelled words. I have spellcheker enabled in Edit - Check Spelling, but it doesn't highlight my errors. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-2-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages pan depends on: ii libatk1.0-0 1.12.1-1The ATK accessibility toolkit ii libbonobo2-0 2.14.0-1Bonobo CORBA interfaces library ii libc62.3.6-15GNU C Library: Shared libraries ii libcairo21.2.0-3 The Cairo 2D vector graphics libra ii libfontconfig1 2.3.2-7 generic font configuration library ii libgcc1 1:4.1.1-2 GCC support library ii libgconf2-4 2.14.0-1GNOME configuration database syste ii libglib2.0-0 2.10.3-1The GLib library of C routines ii libgmime2.1 2.1.19-1MIME library, unstable version ii libgnome2-0 2.14.1-2The GNOME 2 library - runtime file ii libgnomevfs2-0 2.14.2-1GNOME virtual file-system (runtime ii libgtk2.0-0 2.8.18-1The GTK+ graphical user interface ii liborbit21:2.14.0-1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-01.12.3-1Layout and rendering of internatio ii libpcre3 6.4-1.1 Perl 5 Compatible Regular Expressi ii libpopt0 1.10-2 lib for parsing cmdline parameters ii libstdc++6 4.1.1-2 The GNU Standard C++ Library v3 ii libx11-6 2:1.0.0-6 X11 client-side library ii libxcursor1 1.1.5.2-5 X cursor management library ii libxext6 1:1.0.0-4 X11 miscellaneous extension librar ii libxfixes3 1:3.0.1.2-4 X11 miscellaneous 'fixes' extensio ii libxi6 1:1.0.0-5 X11 Input extension library ii libxinerama1 1:1.0.1-4 X11 Xinerama extension library ii libxrandr2 2:1.1.0.2-4 X11 RandR extension library ii libxrender1 1:0.9.0.2-4 X Rendering Extension client libra ii zlib1g 1:1.2.3-13 compression library - runtime pan recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#381945: Acknowledgement (pan: spellcheker is not working in 0.106)
Huh, I discovered another thin If i disable, and enable spellchecker I have error dialog saying: Spellchecker not found! Was this copy of Pan compiled with GtkSpell enabled? So maybe it was just turned of when building this package? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#379996: mpc123: segfault when you pass unsupported long argument
Package: mpc123 Version: 0.1.9+tla20060120-1 Severity: normal I discovered this accidentaly when I forgot to put space between arguments: $ mpc123 --wavOutFile.wav Segmentation Fault. Backtrace follows. NOTE: if you didn't compile with ``make DEBUG=1'', then * this info is probably mostly useless; * recompile with debug activated and try to crash * mpc123 again :) 0: mpc123 [0x8049fdd] 1: [0xe420] 2: /lib/tls/i686/cmov/libc.so.6 [0xa7f11b56] 3: /lib/tls/i686/cmov/libc.so.6 [0xa7f12f61] 4: /lib/tls/i686/cmov/libc.so.6(getopt_long+0x3f) [0xa7f1301f] 5: mpc123 [0x8049d30] 6: /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xd0) [0xa7e70eb0] 7: mpc123 [0x8048d91] Aborting Przerwane It's easy to reproduce. You can pass --whateverYouwant and get this segfault -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-2-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages mpc123 depends on: ii libao20.8.6-3Cross Platform Audio Output Librar ii libc6 2.3.6-15 GNU C Library: Shared libraries ii libmpcdec31.2.2-1Musepack (MPC) format library mpc123 recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#379746: sylpheed-claws-gtk2: all popup windows should be TRANSIENT windows
Package: sylpheed-claws-gtk2 Version: 2.3.1cvs84-1 Severity: normal Right now all child-windows of sylpheed claws appear in random positions. Some windows like preferences window, new-email window are placed in the center of the screen. This is usually good if you have main window maximized. Some windows like Help-About, and this window with progress bar are placed in non controlled way, and this looks ugly. I was checking almost all SC windows with: $ xprop |grep TRANSIENT and It seems that Transient is not used at all. There are ready to use methods for this in gtk and they should be used for all SC windows. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-2-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages sylpheed-claws-gtk2 depends on: ii libaspell15 0.60.4-4 GNU Aspell spell-checker runtime l ii libc6 2.3.6-15 GNU C Library: Shared libraries ii libcompfaceg1 1:1.5.2-3 Compress/decompress images for mai ii libetpan8 0.46-1 mail handling library ii libglib2.0-0 2.10.3-1 The GLib library of C routines ii libgnomeprint2.2-02.12.1-3 The GNOME 2.2 print architecture - ii libgnomeprintui2.2-0 2.12.1-3 GNOME 2.2 print architecture User ii libgtk2.0-0 2.8.18-1 The GTK+ graphical user interface ii libldap2 2.1.30-12 OpenLDAP libraries ii libpango1.0-0 1.12.3-1 Layout and rendering of internatio ii libpisock80.11.8-24 Library for communicating with a P ii libssl0.9.8 0.9.8b-2 SSL shared libraries ii libstartup-notification0 0.8-2 library for program launch feedbac Versions of packages sylpheed-claws-gtk2 recommends: ii aspell-en [aspell-dictionar 6.0-0-5 English dictionary for GNU Aspell ii aspell-pl [aspell-dictionar 20060504-1 Polish dictionary for aspell ii metamail2.7-50 implementation of MIME ii sylpheed-claws-gtk2-i18n2.3.1cvs84-1 Locale data for Sylpheed-Claws GTK pn sylpheed-claws-scripts none (no description available) ii xfonts-100dpi 1:1.0.0-2100 dpi fonts for X ii xfonts-100dpi-transcoded1:1.0.0-2100 dpi fonts for X (transcoded fr ii xfonts-75dpi1:1.0.0-2100 dpi fonts for X ii xfonts-75dpi-transcoded 1:1.0.0-275 dpi fonts for X (transcoded fro -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#379302: yelp: It doesn't show some manual pages
Package: yelp Version: 2.14.2-2 Severity: normal I have to check some methods of std::string (thats a manual page from libstdc++6-doc package). when i type std::string in search box in yelp_2.14 I get a lot of other links insetead the correct one. I can run juest $ pinfo std::string and It shows me what I needed I can do the same in konqueror typing main:/std::string in the address field. I also have old yelp_2.4 on the other machine (the lastest usable version of this progam), and even here typing std::string takes my directly to the right manual page. Why the newer version is broken ? -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: powerpc (ppc) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-1-powerpc Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Versions of packages yelp depends on: ii docbook-xml4.4-4 standard XML documentation system, ii gconf2 2.14.0-1 GNOME configuration database syste ii gnome-doc-utils0.6.0-1 a collection of documentation util ii libart-2.0-2 2.3.17-1 Library of functions for 2D graphi ii libatk1.0-01.11.4-1 The ATK accessibility toolkit ii libbonobo2-0 2.14.0-1 Bonobo CORBA interfaces library ii libbz2-1.0 1.0.3-2 high-quality block-sorting file co ii libc6 2.3.6-10 GNU C Library: Shared libraries ii libgcc11:4.1.1-4 GCC support library ii libgconf2-42.14.0-1 GNOME configuration database syste ii libglade2-01:2.5.1-2 library to load .glade files at ru ii libglib2.0-0 2.10.2-2 The GLib library of C routines ii libgnome2-02.14.1-1 The GNOME 2 library - runtime file ii libgnomeprint2.2-0 2.12.1-3 The GNOME 2.2 print architecture - ii libgnomeprintui2.2-0 2.12.1-2 GNOME 2.2 print architecture User ii libgnomeui-0 2.14.1-1 The GNOME 2 libraries (User Interf ii libgnomevfs2-0 2.14.0-1 GNOME virtual file-system (runtime ii libgtk2.0-02.8.17-2 The GTK+ graphical user interface ii liborbit2 1:2.14.0-1libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.12.3-1 Layout and rendering of internatio ii libpopt0 1.10-2lib for parsing cmdline parameters ii libstartup-notification0 0.8-1 library for program launch feedbac ii libstdc++6 4.1.1-4 The GNU Standard C++ Library v3 ii libx11-6 2:1.0.0-6 X11 client-side library ii libxml22.6.26.dfsg-2 GNOME XML library ii libxslt1.1 1.1.16-2 XSLT processing library - runtime ii libxul0d 1.8.0.1-8 Gecko engine library ii xml-core 0.09-0.1 XML infrastructure and XML catalog ii zlib1g 1:1.2.3-11compression library - runtime yelp recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#379315: yelp: manuals in the see also section are not displayed as links
Package: yelp Version: 2.14.2-2 Severity: normal Almost on every manual page there is See Also section where we have links to some other manuals. Of couse in yelp_2.14 this doesn't work like links - it's just plain text. It's hard to find some other program without this functionality. Again this thing was working in old version of yelp (for example in 2.4), but it's broken as usual. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: powerpc (ppc) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-1-powerpc Locale: LANG=pl_PL.UTF-8, LC_CTYPE=pl_PL.UTF-8 (charmap=UTF-8) Versions of packages yelp depends on: ii docbook-xml4.4-4 standard XML documentation system, ii gconf2 2.14.0-1 GNOME configuration database syste ii gnome-doc-utils0.6.0-1 a collection of documentation util ii libart-2.0-2 2.3.17-1 Library of functions for 2D graphi ii libatk1.0-01.11.4-1 The ATK accessibility toolkit ii libbonobo2-0 2.14.0-1 Bonobo CORBA interfaces library ii libbz2-1.0 1.0.3-2 high-quality block-sorting file co ii libc6 2.3.6-10 GNU C Library: Shared libraries ii libgcc11:4.1.1-4 GCC support library ii libgconf2-42.14.0-1 GNOME configuration database syste ii libglade2-01:2.5.1-2 library to load .glade files at ru ii libglib2.0-0 2.10.2-2 The GLib library of C routines ii libgnome2-02.14.1-1 The GNOME 2 library - runtime file ii libgnomeprint2.2-0 2.12.1-3 The GNOME 2.2 print architecture - ii libgnomeprintui2.2-0 2.12.1-2 GNOME 2.2 print architecture User ii libgnomeui-0 2.14.1-1 The GNOME 2 libraries (User Interf ii libgnomevfs2-0 2.14.0-1 GNOME virtual file-system (runtime ii libgtk2.0-02.8.17-2 The GTK+ graphical user interface ii liborbit2 1:2.14.0-1libraries for ORBit2 - a CORBA ORB ii libpango1.0-0 1.12.3-1 Layout and rendering of internatio ii libpopt0 1.10-2lib for parsing cmdline parameters ii libstartup-notification0 0.8-1 library for program launch feedbac ii libstdc++6 4.1.1-4 The GNU Standard C++ Library v3 ii libx11-6 2:1.0.0-6 X11 client-side library ii libxml22.6.26.dfsg-2 GNOME XML library ii libxslt1.1 1.1.16-2 XSLT processing library - runtime ii libxul0d 1.8.0.1-8 Gecko engine library ii xml-core 0.09-0.1 XML infrastructure and XML catalog ii zlib1g 1:1.2.3-11compression library - runtime yelp recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#378413: sysprof: It is not possible to start systprof - missing libraries: libbfd-2.16.91.so
Package: sysprof Version: 1.0.3-1 Severity: important When trying to start sysprof I have an error about missing libary libbfd: ~$ sysprof sysprof: error while loading shared libraries: libbfd-2.16.91.so: cannot open shared object file: No such file or directory ~$ This libfd was part of binutils some time ago. But now I couldn't find package with this file in debian repostiry. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-2-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages sysprof depends on: ii binutils 2.17-1The GNU assembler, linker and bina ii libatk1.0-01.12.1-1 The ATK accessibility toolkit ii libc6 2.3.6-15 GNU C Library: Shared libraries ii libcairo2 1.2.0-3 The Cairo 2D vector graphics libra ii libfontconfig1 2.3.2-7 generic font configuration library ii libglade2-01:2.5.1-2 library to load .glade files at ru ii libglib2.0-0 2.10.3-1 The GLib library of C routines ii libgtk2.0-02.8.18-1 The GTK+ graphical user interface ii libpango1.0-0 1.12.3-1 Layout and rendering of internatio ii libx11-6 2:1.0.0-6 X11 client-side library ii libxcursor11.1.5.2-5 X cursor management library ii libxext6 1:1.0.0-4 X11 miscellaneous extension librar ii libxfixes3 1:3.0.1.2-4 X11 miscellaneous 'fixes' extensio ii libxi6 1:1.0.0-5 X11 Input extension library ii libxinerama1 1:1.0.1-4 X11 Xinerama extension library ii libxml22.6.26.dfsg-2 GNOME XML library ii libxrandr2 2:1.1.0.2-4 X11 RandR extension library ii libxrender11:0.9.0.2-4 X Rendering Extension client libra ii zlib1g 1:1.2.3-13compression library - runtime Versions of packages sysprof recommends: ii sysprof-module-source 1.0.3-1Source for the sysprof module -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#378413: Acknowledgement (sysprof: It is not possible to start systprof - missing libraries: libbfd-2.16.91.so)
Of course simple rebuilding this package fixes everything. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#378232: libgksu2-0: there should be Replaces: libgksu0 field
Package: libgksu2-0 Version: 1.9.5-1 Severity: normal When I try to upgrade from old version of gksu. I have error saying that there are same files in libgksu0 nad libgsku2. So there should be Replaces: libgksu0 in debian/control for that. apt output: After unpacking 406kB of additional disk space will be used. (Reading database ... 201491 files and directories currently installed.) Unpacking libgksu2-0 (from .../libgksu2-0_1.9.5-1_i386.deb) ... dpkg: error processing /var/cache/apt/archives/libgksu2-0_1.9.5-1_i386.deb (--unpack): trying to overwrite `/usr/share/pixmaps/gksu.png', which is also in package libgksu0 Errors were encountered while processing: /var/cache/apt/archives/libgksu2-0_1.9.5-1_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) # -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-2-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#377650: tidy: short options should have -, and long options should heave --
Package: tidy Version: 20051018-1 Severity: normal I;m not sure if there is some standard about command line options, but almost every program has -- for long options. I think that it is very important for all the programs behave in the same way. Right now in tidy we have: -output file, -o write output to the specified file and it should be: --output file, -o file write output to the specified file -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages tidy depends on: ii libc6 2.3.6-7GNU C Library: Shared libraries ii libtidy-0.99-020051018-1 HTML syntax checker and reformatte tidy recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#369009: coreutils: [INTL:pl] Broken Polish locale messages catalog
Translation in coreutils_5.96.tar.gz is complete mess. We have to use file from translation team: http://www.iro.umontreal.ca/translation/teams/PO/pl/coreutils-5.96.pl.po As a quick-fix users can download it and execute following command: # msgfmt coreutils-5.96.pl.po -o /usr/share/locale/pl/LC_MESSAGES/coreutils.mo ..and all coreutils messages will be readable. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#376601: gettext: java libaries should be in /usr/share/java/*.jar
Package: gettext Version: 0.14.6-1 Severity: minor According to Debian Java policy http://www.debian.org/doc/packaging-manuals/java-policy/ all libaries should be placed in /usr/share/java/ Right now gettext bindings are in /usr/share/gettext/: /usr/share/gettext/gettext.jar /usr/share/gettext/libintl.jar -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages gettext depends on: ii gettext-base 0.14.6-1 GNU Internationalization utilities ii libc6 2.3.6-7GNU C Library: Shared libraries Versions of packages gettext recommends: ii curl 7.15.4-1 Get a file from an HTTP, HTTPS, FT ii wget 1.10.2-1 retrieves files from the web -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#360708: closed by Rene Engelhard [EMAIL PROTECTED] (fixed?)
On 2006-06-27 (Tue), at 06:51:33 Rene Engelhard wrote: are those bugs still present in Linux 2.6.17-1 (which contains bcm43xx now)? If not, please close. wow - It works on 2.6.17 thanks for info. However this was bug about bcm43xx-modules-2.6.15-1-powerpc not linux-image-2.6.17, so I'm not sure if it should be closed. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#368035: dhelp doesn't show any help
On 2006-06-11 (Sun), at 15:45:49 Esteban Manchado Velázquez wrote: 2) Can you send your index.html to the bug report, so we can inspect its contents? oki. It's attached to this message. Thanks. The debian link in HTML/index.html works, right? What about the contents of HTML/debian/index.html? Are there links in that file? Do they work? Mhm I don't know what which one is debian link. OK. Do you have doc-base installed? If not, can you try installing it and checking the HTML directory. If it's still empty, just run again dhelp_parse -r and check again. After installing doc-base and running dhelp_parse I have some documents here. But I still don't have manual and info pages.
Bug#368035: dhelp doesn't show any help
On 2006-06-10 (Sat), at 19:31:50 Esteban Manchado Velázquez wrote: Hi Emil, A couple of questions concerning you bug report: 1) Is /usr/share/doc/HTML empty, apart from index.html? Yes it almost empty. Check this out: /usr/share/doc/HTML$ ls -Rl .: total 12 -rw-r--r-- 1 root root 144 May 19 14:04 README drwxr-xr-x 2 root root 4096 May 19 14:04 debian -rw-r--r-- 1 root root 706 May 19 14:04 index.html ./debian: total 4 -rw-r--r-- 1 root root 719 May 19 14:04 index.html /usr/share/doc/HTML$ 2) Can you send your index.html to the bug report, so we can inspect its contents? oki. It's attached to this message. 3) Can you run dhelp_parse -r, as root, and paste here the output? Are there any errors? Is there anything in /usr/share/doc/HTML now? there was no error, and /usr/share/doc/HTML is still empty. Title: Debian Online Help Debian Online Help debian/ [ info documents | man pages | other documents ]
Bug#369950: eclipse could is not search in the right place for sun-java5-jdk
Package: eclipse Version: 3.1.2-2 Severity: minor So now we have sun jdk in debian, but eclipse is not trying to use it. I know I can set JAVA_HOME and it everytinh manualy. But it will be better to provide correct path to our: /etc/eclipse/java_home and btw: sun-jdk package with filelist is here. http://packages.debian.org/sun-java5-jdk -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages eclipse depends on: ii eclipse-jdt 3.1.2-2Java Development Tools plug-ins fo ii eclipse-pde 3.1.2-2Plug-in Development Environment to ii eclipse-source3.1.2-2Eclipse source code plug-ins eclipse recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#369270: tomcat5-webapps: working servlet examples are different than those in documentation
Package: tomcat5-webapps Version: 5.0.30-9 Severity: minor When viewing documentation through tomcat, we have a nicely colorued servlet examples. I found that RequestHeader example is different in documentation, and different in real. This documentation is by default on: http://localhost:8180/servlets-examples/reqheaders.html and file is in: /var/lib/tomcat5/webapps/servlets-examples/reqheaders.html and when you click the execute button, above the example, the result is a bit different that expected. The real source of this file is in: /var/lib/tomcat5/webapps/servlets-examples/WEB-INF/classes/RequestHeaderExample.java It seems that there are old exmamples in colorful html, and different in real classes. Aren't they automaticly generated? -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages tomcat5-webapps depends on: ii tomcat5 5.0.30-9 Java Servlet 2.4 engine with JSP 2 tomcat5-webapps recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#368963: sylpheed-claws-gtk2: please add icon for debian-menu entry
Package: sylpheed-claws-gtk2 Version: 2.2.0-1 Severity: wishlist Currently debian menu for sc-gtk2 doesn't have icon. It doesn't look nice. Plase add icon for it. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages sylpheed-claws-gtk2 depends on: ii libaspell15 0.60.4-3 GNU Aspell spell-checker runtime l ii libc6 2.3.6-7GNU C Library: Shared libraries ii libcompfaceg1 1:1.5.2-3 Compress/decompress images for mai ii libetpan6 0.45-1 mail handling library ii libglib2.0-0 2.10.2-1 The GLib library of C routines ii libgnomeprint2.2-02.12.1-3 The GNOME 2.2 print architecture - ii libgnomeprintui2.2-0 2.12.1-3 GNOME 2.2 print architecture User ii libgtk2.0-0 2.8.17-2 The GTK+ graphical user interface ii libldap2 2.1.30-12 OpenLDAP libraries ii libpango1.0-0 1.12.1-2 Layout and rendering of internatio ii libpisock80.11.8-17 Library for communicating with a P ii libssl0.9.8 0.9.8b-1 SSL shared libraries Versions of packages sylpheed-claws-gtk2 recommends: ii aspell-en [aspell-dictionary] 6.0-0-5English dictionary for GNU Aspell ii aspell-pl [aspell-dictionary] 20060504-1 Polish dictionary for aspell ii metamail 2.7-50 implementation of MIME ii sylpheed-claws-gtk2-i18n 2.2.0-1Locale data for Sylpheed-Claws GTK pn sylpheed-claws-scriptsnone (no description available) ii xfonts-100dpi 1:1.0.0-2 100 dpi fonts for X ii xfonts-100dpi-transcoded 1:1.0.0-2 100 dpi fonts for X (transcoded fr ii xfonts-75dpi 1:1.0.0-2 100 dpi fonts for X ii xfonts-75dpi-transcoded 1:1.0.0-2 75 dpi fonts for X (transcoded fro -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#369027: amule: copying e2k link makes copy to primary selection instead of clipboard
Package: amule Version: 2.1.1-3 Severity: normal When I click on some download in amule and right click on it then I get this context menu. Here I can copy a e2k link, but after selecting this action from menu, e2k link is stored in primary selection. It should be in normal clipboard. More information about all the clipboards can be found here: http://www.freedesktop.org/Standards/clipboards-spec -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages amule depends on: ii amule-common2.1.1-3 common files for aMule ii libc6 2.3.6-7 GNU C Library: Shared libraries ii libcrypto++5.2c2a 5.2.1c2a-2 General purpose cryptographic shar ii libgcc1 1:4.1.0-1+b1 GCC support library ii libstdc++6 4.1.0-1+b1 The GNU Standard C++ Library v3 ii libwxgtk2.6-0 2.6.3.2.1wxWidgets Cross-platform C++ GUI t ii zlib1g 1:1.2.3-11 compression library - runtime Versions of packages amule recommends: pn amule-daemon none (no description available) pn amule-utils none (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#368035: dhelp doesn't show any help
Package: dhelp Version: 0.5.23 Severity: important I have just installed dhelp, and swish++, info2www, man2html. But there is nothing to read here. The only thing available is the main dhelp pahe, at file://localhost/usr/share/doc/HTML/index.html all the links go to non-exist files. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages dhelp depends on: ii debconf [debconf-2.0] 1.5.1 Debian configuration management sy ii libc6 2.3.6-7GNU C Library: Shared libraries ii libdb33.2.9-23 Berkeley v3 Database Libraries [ru ii perl-modules 5.8.8-4Core Perl modules Versions of packages dhelp recommends: ii dillo [www-browser] 0.8.5-4Small and fast web browser ii firefox [www-browser] 1.5.dfsg+1.5.0.3-2 lightweight web browser based on M ii konqueror [www-browse 4:3.5.2-1 KDE's advanced file manager, web b ii links2 [www-browser] 2.1pre21-1+b1 Web browser running in both graphi ii mozilla-browser [www- 2:1.7.12-1.1 The Mozilla Internet application s ii opera [www-browser] 8.54-20060330.6The Opera Web Browser -- debconf information: * dhelp/www-browser-console: * dhelp/www-browser-x: opera -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#368144: libgtk2.0-doc: the gettext related FAQ section, doesn't have encoding issue described
Package: libgtk2.0-doc Version: 2.8.17-2 Severity: normal in the faq: /usr/share/doc/libgtk2.0-doc/gtk/gtk-question-index.html in secion 1.7, we have described inrenatiolization of gtk-based programs. However the most important (IMHO) thing, about gtk-specyfic things is missing here. gtk uses unicode for all strings, and so we need to call: bind_textdomain_codeset(PACKAGE, UTF-8); If you don't do this all non-ascii characters from *.mo files will produce FATAL worning, and they will be wrongly displayed. This should be mentioned here in this section. -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-1-686 Locale: LANG=pl_PL, LC_CTYPE=pl_PL (charmap=ISO-8859-2) Versions of packages libgtk2.0-doc depends on: ii dillo [www-browser] 0.8.5-4Small and fast web browser ii firefox [www-browser] 1.5.dfsg+1.5.0.3-2 lightweight web browser based on M ii konqueror [www-browse 4:3.5.2-1 KDE's advanced file manager, web b ii links2 [www-browser] 2.1pre21-1+b1 Web browser running in both graphi ii mozilla-browser [www- 2:1.7.12-1.1 The Mozilla Internet application s ii opera [www-browser] 8.54-20060330.6The Opera Web Browser libgtk2.0-doc recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#366253: libgtk2.0-0: Windows created by gtk-apps don't have Transient property
On 2006-05-06 (Sat), at 16:13:56 Emil Nowak wrote: Current GTK version does not set the WM_TRANSIENT_FOR hint for windows. Oki, I have just investigated this problem, and I realized that the second argument I was passing to gtk_set_trasient_for was not a valid GtkWindow*. But usually all gtk methods have some checking for arguments. It seems that this function doesn't have. I have checked the gt sources and in gtkwindow.c, at the begging of this function, there is a checking like this: g_return_if_fail (parent == NULL || GTK_IS_WINDOW (parent)); but it never fails whatever you pass as parent. The attached example shows the problem.#include gtk/gtk.h int main(int argc, char **argv) { gtk_init(argc, argv); GtkWidget *first_win = gtk_window_new(GTK_WINDOW_TOPLEVEL); GtkWidget *second_win = gtk_window_new(GTK_WINDOW_TOPLEVEL); GtkWidget *nothing = NULL; /* That's a check from libgtk*/ g_return_if_fail (nothing == NULL || GTK_IS_WINDOW (nothing)); /* and there is no warning when passign nothig as second argument */ gtk_window_set_transient_for(GTK_WINDOW(second_win), GTK_WINDOW(nothing)); /* of course the below line works. */ //gtk_window_set_transient_for(GTK_WINDOW(second_win), GTK_WINDOW(first_win)); gtk_widget_show(first_win); gtk_widget_show(second_win); gtk_main(); return 0; }