Bug#572084: linux-image-2.6.32-2-orion5x: NFS kernel daemon support disabled?
Package: linux-2.6
Version: 2.6.32-8
Severity: normal
After upgrading its kernel from 2.6.30-2-orion5x to 2.6.32-2-orion5x, I
cannot mount NFS v4 filesystems exported by my QNAP-409. When attempting
to restart nfs-kernel-server, I get the warning Not starting NFS kernel
daemon: no support in current kernel. (warning).
Looking at /boot/config-2.6.3{0,2}-2-orion5x, I notice that there are no
differences in the NFS defines, so the issue may be elsewhere:
$ diff config-2.6.30-2-orion5x config-2.6.32-2-orion5x | grep NFS
# CONFIG_NFS_V4_1 is not set
Best regards,
Marco
-- Package-specific info:
** Version:
Linux version 2.6.32-2-orion5x (Debian 2.6.32-8) (b...@decadent.org.uk) (gcc
version 4.3.4 (Debian 4.3.4-6) ) #1 Fri Feb 12 18:12:26 UTC 2010
** Command line:
console=ttyS0,115200n8 root=/dev/ram rw initrd=0x80,0x3f
** Not tainted
** Kernel log:
[ 15.807260] disk 1, o:1, dev:sdb4
[ 15.810657] disk 2, o:1, dev:sdc4
[ 15.814053] disk 3, o:1, dev:sdd4
[ 15.817761] md3: detected capacity change from 0 to 2968503189504
[ 15.827266] md3: unknown partition table
[ 16.200899] device-mapper: uevent: version 1.0.3
[ 16.213670] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised:
dm-de...@redhat.com
[ 16.734575] kjournald starting. Commit interval 5 seconds
[ 16.776991] EXT3 FS on md1, internal journal
[ 16.781283] EXT3-fs: mounted filesystem with ordered data mode.
[ 19.760494] udevd version 125 started
[ 28.303276] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 28.440151] MV-643xx 10/100/1000 ethernet driver version 1.4
[ 28.452110] mv643xx_eth smi: probed
[ 28.517926] net eth0: port 0 with MAC address 00:08:9b:ad:18:00
[ 28.780462] usbcore: registered new interface driver usbfs
[ 28.824341] usbcore: registered new interface driver hub
[ 28.856461] usbcore: registered new device driver usb
[ 28.977325] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 28.983933] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 29.013854] orion-ehci orion-ehci.0: new USB bus registered, assigned bus
number 1
[ 29.066231] orion-ehci orion-ehci.0: irq 17, io mem 0xf105
[ 29.086167] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 29.092196] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 29.099128] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 29.106365] usb usb1: Product: Marvell Orion EHCI
[ 29.111066] usb usb1: Manufacturer: Linux 2.6.32-2-orion5x ehci_hcd
[ 29.117347] usb usb1: SerialNumber: orion-ehci.0
[ 29.197741] usb usb1: configuration #1 chosen from 1 choice
[ 29.225771] hub 1-0:1.0: USB hub found
[ 29.229664] hub 1-0:1.0: 1 port detected
[ 29.546139] usb 1-1: new high speed USB device using orion-ehci and address 2
[ 29.717864] usb 1-1: New USB device found, idVendor=05e3, idProduct=0607
[ 29.724560] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 29.731729] usb 1-1: Product: USB2.0 Hub
[ 29.796155] usb 1-1: configuration #1 chosen from 1 choice
[ 29.828269] hub 1-1:1.0: USB hub found
[ 29.856115] hub 1-1:1.0: 4 ports detected
[ 30.146656] usb 1-1.2: new low speed USB device using orion-ehci and address
3
[ 30.370289] usb 1-1.2: New USB device found, idVendor=051d, idProduct=0002
[ 30.377206] usb 1-1.2: New USB device strings: Mfr=3, Product=1,
SerialNumber=2
[ 30.384498] usb 1-1.2: Product: Back-UPS CS 500 FW:808.q8.I USB FW:q8
[ 30.391003] usb 1-1.2: Manufacturer: American Power Conversion
[ 30.396852] usb 1-1.2: SerialNumber: 4B0827P61177
[ 30.504601] usb 1-1.2: configuration #1 chosen from 1 choice
[ 31.872575] usbcore: registered new interface driver hiddev
[ 33.480348] generic-usb 0003:051D:0002.0001: hiddev0,hidraw0: USB HID v1.10
Device [American Power Conversion Back-UPS CS 500 FW:808.q8.I USB FW:q8] on
usb-orion-ehci.0-1.2/input0
[ 33.500871] usbcore: registered new interface driver usbhid
[ 33.512864] usbhid: v2.6:USB HID core driver
[ 35.064935] Adding 489848k swap on /dev/md2. Priority:-1 extents:1
across:489848k
[ 35.836959] EXT3 FS on md1, internal journal
[ 37.925238] loop: module loaded
[ 58.943332] kjournald starting. Commit interval 5 seconds
[ 59.023983] EXT3 FS on dm-0, internal journal
[ 59.028409] EXT3-fs: mounted filesystem with ordered data mode.
[ 59.096987] kjournald starting. Commit interval 5 seconds
[ 59.146857] EXT3 FS on dm-2, internal journal
[ 59.151240] EXT3-fs: mounted filesystem with ordered data mode.
[ 59.284494] kjournald starting. Commit interval 5 seconds
[ 59.302755] EXT3 FS on dm-10, internal journal
[ 59.307264] EXT3-fs: mounted filesystem with ordered data mode.
[ 59.416207] kjournald starting. Commit interval 5 seconds
[ 59.432092] EXT3 FS on dm-9, internal journal
[ 59.436517] EXT3-fs: mounted filesystem with ordered data mode.
[ 59.529291] kjournald starting. Commit interval 5 seconds
[ 59.551157] EXT3 FS
Bug#572084: linux-image-2.6.32-2-orion5x: NFS kernel daemon support disabled?
Martin Michlmayr wrote: * Marco van Zwetselaar zw...@zwets.com [2010-03-01 14:18]: After upgrading its kernel from 2.6.30-2-orion5x to 2.6.32-2-orion5x, I cannot mount NFS v4 filesystems exported by my QNAP-409. When attempting to restart nfs-kernel-server, I get the warning Not starting NFS kernel daemon: no support in current kernel. (warning). You probably ran into this issue: http://bugs.debian.org/550153 Yes, this turned out to be the issue. Thx Marco -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#568310: consolekit: Please upgrade severity: .svn directory causes Not Authorized failures.
Package: consolekit Version: 0.4.1-3 Severity: normal The presence of .svn directories does not just result in a message being logged. As documented in the thread below, its presence in /etc/ConsoleKit/seats.d causes the automounting of USB devices and CD/DVDs to fail with a message Not Authorized. http://www.mail-archive.com/ubuntu-b...@lists.ubuntu.com/msg1868909.html This behaviour was easily reproducible on my system. Users on my system were unable to automount camera's or DVD until I removed the offending directory. Please consider a severity upgrade to important. Best regards, Marco -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.32-05z1 Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages consolekit depends on: ii dbus1.2.20-2 simple interprocess messaging syst ii libc6 2.10.2-2 GNU C Library: Shared libraries ii libck-connector00.4.1-3 ConsoleKit libraries ii libdbus-1-3 1.2.20-2 simple interprocess messaging syst ii libdbus-glib-1-20.84-1 simple interprocess messaging syst ii libglib2.0-02.22.4-1 The GLib library of C routines ii libpolkit-gobject-1-0 0.96-1 PolicyKit Authorization API ii libx11-62:1.3.3-1X11 client-side library ii zlib1g 1:1.2.3.4.dfsg-3 compression library - runtime Versions of packages consolekit recommends: ii libpam-ck-connector 0.4.1-3ConsoleKit PAM module consolekit suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#568310: [Pkg-utopia-maintainers] Bug#568310: consolekit: Please upgrade severity: .svn directory causes Not Authorized failures.
Michael Biebl wrote: tags 568310 moreinfo unreproducible thanks Marco van Zwetselaar wrote: Package: consolekit Version: 0.4.1-3 Severity: normal The presence of .svn directories does not just result in a message being logged. As documented in the thread below, its presence in /etc/ConsoleKit/seats.d causes the automounting of USB devices and CD/DVDs to fail with a message Not Authorized. http://www.mail-archive.com/ubuntu-b...@lists.ubuntu.com/msg1868909.html This behaviour was easily reproducible on my system. Users on my system were unable to automount camera's or DVD until I removed the offending directory. Please consider a severity upgrade to important. I cannot reproduce the problem you are having. I created a .svn directory in /etc/ConsoleKit/seats.d/ and besides the harmless warning message everything is working fine. Could you run kill $(cat /var/run/console-kit-daemon.pid) console-kit-daemon --debug --no-daemon And attach the output. See the attached logs (normal is without the .svn directory present). Note that I logged out, put the .svn directory back, logged in again, started the daemon. Then I inserted a DVD and again got the Not Authorized message (in Gnome). This was at the point where the daemon wrote console-kit-daemon[6010]: DEBUG: CkManager: get session for unix process: 5723 Also included the ck-list-session output. Note that when I run it now (after killing the daemon), there is no output at all. Best regards, Marco console-kit-daemon[5376]: DEBUG: Debugging enabled console-kit-daemon[5376]: DEBUG: initializing console-kit-daemon 0.4.1 console-kit-daemon[5376]: DEBUG: Creating thread for log writing console-kit-daemon[5376]: DEBUG: Creating seat /org/freedesktop/ConsoleKit/Seat1 with 0 devices console-kit-daemon[5376]: DEBUG: Current VT: tty7 console-kit-daemon[5376]: DEBUG: VT 1:on console-kit-daemon[5376]: DEBUG: VT 2:on console-kit-daemon[5376]: DEBUG: VT 3:on console-kit-daemon[5376]: DEBUG: VT 4:on console-kit-daemon[5376]: DEBUG: VT 5:on console-kit-daemon[5376]: DEBUG: VT 6:on console-kit-daemon[5376]: DEBUG: VT 7:on console-kit-daemon[5376]: DEBUG: VT 8:off console-kit-daemon[5376]: DEBUG: VT 9:off console-kit-daemon[5376]: DEBUG: VT 10:off console-kit-daemon[5376]: DEBUG: VT 11:off console-kit-daemon[5376]: DEBUG: VT 12:off console-kit-daemon[5376]: DEBUG: VT 13:off console-kit-daemon[5376]: DEBUG: VT 14:off console-kit-daemon[5376]: DEBUG: VT 15:off console-kit-daemon[5376]: DEBUG: VT 16:off console-kit-daemon[5376]: DEBUG: Creating thread for vt 1 console-kit-daemon[5376]: DEBUG: Creating thread for vt 2 console-kit-daemon[5376]: DEBUG: Creating thread for vt 3 console-kit-daemon[5376]: DEBUG: Creating thread for vt 4 console-kit-daemon[5376]: DEBUG: Creating thread for vt 5 console-kit-daemon[5376]: DEBUG: Creating thread for vt 6 console-kit-daemon[5376]: DEBUG: Creating thread for vt 8 console-kit-daemon[5376]: DEBUG: Creating thread for vt 9 console-kit-daemon[5376]: DEBUG: Creating thread for vt 10 console-kit-daemon[5376]: DEBUG: Creating thread for vt 11 console-kit-daemon[5376]: DEBUG: Creating thread for vt 12 console-kit-daemon[5376]: DEBUG: Creating thread for vt 13 console-kit-daemon[5376]: DEBUG: Creating thread for vt 14 console-kit-daemon[5376]: DEBUG: Creating thread for vt 15 console-kit-daemon[5376]: DEBUG: Creating thread for vt 16 console-kit-daemon[5376]: DEBUG: Creating thread for vt 17 console-kit-daemon[5376]: DEBUG: Creating thread for vt 18 console-kit-daemon[5376]: DEBUG: Creating thread for vt 19 console-kit-daemon[5376]: DEBUG: Creating thread for vt 20 console-kit-daemon[5376]: DEBUG: Creating thread for vt 21 console-kit-daemon[5376]: DEBUG: Creating thread for vt 22 console-kit-daemon[5376]: DEBUG: Creating thread for vt 23 console-kit-daemon[5376]: DEBUG: Creating thread for vt 24 console-kit-daemon[5376]: DEBUG: Creating thread for vt 25 console-kit-daemon[5376]: DEBUG: Creating thread for vt 26 console-kit-daemon[5376]: DEBUG: Creating thread for vt 27 console-kit-daemon[5376]: DEBUG: Creating thread for vt 28 console-kit-daemon[5376]: DEBUG: Creating thread for vt 29 console-kit-daemon[5376]: DEBUG: Creating thread for vt 30 console-kit-daemon[5376]: DEBUG: Creating thread for vt 31 console-kit-daemon[5376]: DEBUG: Creating thread for vt 32 console-kit-daemon[5376]: DEBUG: Creating thread for vt 33 console-kit-daemon[5376]: DEBUG: Creating thread for vt 34 console-kit-daemon[5376]: DEBUG: VT_WAITACTIVE for vt 3 console-kit-daemon[5376]: DEBUG: VT_WAITACTIVE for vt 4 console-kit-daemon[5376]: DEBUG: Creating thread for vt 35 console-kit-daemon[5376]: DEBUG: Creating thread for vt 36 console-kit-daemon[5376]: DEBUG: Creating thread for vt 37 console-kit-daemon[5376]: DEBUG: Creating thread for vt 38 console-kit-daemon[5376]: DEBUG: Creating thread for vt 39 console-kit-daemon[5376]: DEBUG: Creating thread for vt 40 console-kit-daemon[5376]: DEBUG: Creating thread for vt 41 console-kit-daemon[5376
Bug#537142: synce-sync-engine: Please provide opensync-plugin-synce-legacy
Package: synce-sync-engine Version: 0.13-2 Severity: wishlist After a lot of struggle to get an old Dell Axim PDA synchronised using msyntool / synce, I discovered that Windows Mobile and Pocket PCs can't be synchronised using the opensync synce plugin. However a legacy plugin is available that will synchronise Windows Mobile 2003 devices. I installed the one provided by Ubuntu and it works fine. It would be great if you could package and distribute this with Debian. Thanks, Marco -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.30-02z1 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/bash Versions of packages synce-sync-engine depends on: ii python 2.5.4-2 An interactive high-level object-o ii python-central 0.6.11 register and build utility for Pyt ii python-dateutil 1.4.1-3 powerful extensions to the standar ii python-dbus 0.83.0-1 simple interprocess messaging syst ii python-gobject 2.16.1-1 Python bindings for the GObject li ii python-libxml2 2.7.3.dfsg-1 Python bindings for the GNOME XML ii python-libxslt1 1.1.24-2 Python bindings for libxslt1 ii python-rapi20.13.1-2 Make RAPI calls to a Windows Mobil ii python-rra 0.13-2 Library for syncing with Windows M ii python-rtfcomp 1.1-4Library to read compressed RTF fil ii python-tz 2009g-1 Python version of the Olson timezo ii synce-hal [odccm] 0.13.1-2 Daemon to maintain a connection to synce-sync-engine recommends no packages. synce-sync-engine suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#532608: gcompris depends on non-existent gsgstreamer0.10-alsa
Package: gcompris Version: 8.4.12-1 Severity: normal There is a typo in the gstreamer0.10-alsa dependency: it reads gsgstreamer0.10-alsa. The initial gs should be removed. -- System Information: Debian Release: squeeze/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.29-04z1 Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages gcompris depends on: ii gcompris-data 8.4.12-1 Data files for GCompris ii gstreamer0.10-alsa [gs 0.10.23-2 GStreamer plugin for ALSA ii gstreamer0.10-esd [gst 0.10.15-2 GStreamer plugin for ESD ii gstreamer0.10-plugins- 0.10.10.3-1 GStreamer plugins from the bad s ii gstreamer0.10-plugins- 0.10.23-2 GStreamer plugins from the base ii gstreamer0.10-plugins- 0.10.15-2 GStreamer plugins from the good ii libatk1.0-01.26.0-1 The ATK accessibility toolkit ii libc6 2.9-12GNU C Library: Shared libraries ii libcairo2 1.8.6-2+b1The Cairo 2D vector graphics libra ii libfontconfig1 2.6.0-3 generic font configuration library ii libfreetype6 2.3.9-4.1 FreeType 2 font engine, shared lib ii libglib2.0-0 2.20.1-2 The GLib library of C routines ii libgnet2.0-0 2.0.8-1 GNet network library ii libgstreamer0.10-0 0.10.23-1 Core GStreamer libraries and eleme ii libgtk2.0-02.16.1-2 The GTK+ graphical user interface ii libpango1.0-0 1.24.0-3+b1 Layout and rendering of internatio ii librsvg2-common2.22.3-2 SAX-based renderer library for SVG ii libsqlite3-0 3.6.13-1 SQLite 3 shared library ii libx11-6 2:1.2.1-1 X11 client-side library ii libxml22.7.3.dfsg-1 GNOME XML library ii libxxf86vm11:1.0.2-1 X11 XFree86 video mode extension l ii python-gtk22.14.1-3 Python bindings for the GTK+ widge ii python-pysqlite2 2.5.5-1 Python interface to SQLite 3 ii python2.5 2.5.4-1 An interactive high-level object-o ii zlib1g 1:1.2.3.3.dfsg-13 compression library - runtime gcompris recommends no packages. Versions of packages gcompris suggests: pn gnucapnone (no description available) ii gnuchess 5.07-5 Plays a game of chess, either agai ii tuxpaint 1:0.9.20-2 A paint program for young children -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#517771: linux-image-orion5x: please enable CONFIG_USB_HIDDEV
Package: linux-image-2.6.26-1-orion5x Version: 2.6.26-13 Severity: important The current version of the orion kernel image has no hiddev support, which is needed by devices such as UPS-es which connect via USB. For instance, the package apcupsd will not run on this kernel, because it cannot find any /dev/usb/hiddev* devices. Please enable the option CONFIG_USB_HIDDEV to correct this. Severity set to important at request of Martin Michlmayr. We have verified that this option indeed solves the problem. Marco -- System Information: Debian Release: 5.0 APT prefers stable APT policy: (500, 'stable') Architecture: armel (armv5tel) Kernel: Linux 2.6.26-1-orion5x Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages linux-image-2.6.26-1-orion5x depends on: ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs ii module-init-tools 3.4-1 tools for managing Linux kernel mo Versions of packages linux-image-2.6.26-1-orion5x recommends: ii uboot-mkimage 0.4generate kernel image for U-Boot Versions of packages linux-image-2.6.26-1-orion5x suggests: pn fdutils none (no description available) pn linux-doc-2.6.26 none (no description available) -- debconf information excluded -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#514113: exim4-config: REMOTE_SMTP_HELO_DATA macro setting ignored
Package: exim4-config Version: 4.69-9 Severity: normal Tags: patch Setting REMOTE_SMTP_HELO_DATA in exim4.conf.localmacros has no effect because it is shielded (in transport/30_exim4-config_remote_smtp*) by .ifdef REMOTE_SMTP_HELO_FROM_DNS instead of .ifdef REMOTE_SMTP_HELO_DATA. Fix: in these files: - transport/30_exim4-config_remote_smtp - transport/30_exim4-config_remote_smtp_smarthost replace the line reading: .ifdef REMOTE_SMTP_HELO_FROM_DNS by: .ifdef REMOTE_SMTP_HELO_DATA Best regards, Marco -- Package-specific info: Exim version 4.69 #1 built 30-Sep-2008 18:26:35 Copyright (c) University of Cambridge 2006 Berkeley DB: Berkeley DB 4.6.21: (September 27, 2007) Support for: crypteq iconv() IPv6 GnuTLS move_frozen_messages Lookups: lsearch wildlsearch nwildlsearch iplsearch cdb dbm dbmnz dnsdb dsearch nis nis0 passwd Authenticators: cram_md5 plaintext Routers: accept dnslookup ipliteral manualroute queryprogram redirect Transports: appendfile/maildir/mailstore autoreply lmtp pipe smtp Fixed never_users: 0 Size of off_t: 8 Configuration file is /var/lib/exim4/config.autogenerated -- System Information: Debian Release: 5.0 APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.26-12z1 Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages exim4-config depends on: ii adduser 3.110 add and remove users and groups ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy exim4-config recommends no packages. exim4-config suggests no packages. -- debconf information excluded -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#429827: sponsor?
Yaroslav, It would be great if you could sponsor qtstalker. It has been nearly three years since its latest upload. Were there particular problems why noone ended up sponsoring your packages? No, mainly a very lax sponsor ... If not, let me know url to the most recent versions (.dsc's) of your packages (I guess ones from June at http://www.zwets.com/debs/unstable/ could be outdated) and I will have a look and sponsor them if they are ready ;-) I have just prepared and uploaded 0.36-2 to both mentors.debian.net[1] and to my site[2]. In it, I ack the recent NMU (0.32-3.2), and thank you in advance :-) It builds and installs fine against current unstable, and is lintian clean. Note that Qtstalker depends on TA-Lib which isn't in Debian yet. (My ITP for TA-Lib expired after a year.) My packages for TA-Lib are at mentors and my site as well [3,4]. Thanks for the sponsorship offer! Regards, Marco [1] http://mentors.debian.net/debian/pool/main/q/qtstalker/qtstalker_0.36-2.dsc [2] http://www.zwets.com/debs/unstable/qtstalker_0.36-2.dsc [3] http://mentors.debian.net/debian/pool/main/t/ta-lib/ta-lib_0.4.0-2.dsc [4] http://www.zwets.com/debs/unstable/ta-lib_0.4.0-2.dsc -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429827: qtstalker: year later
Adam Majer wrote: http://www.zwets.com/debs/unstable/ Contains the ta-lib, which is needed by qtstalker. Are you looking to have that sponsored as well? Yes, I filed an ITP for it (#437177), but that was closed in August due to the same problem: no sponsor. Also, is there any work being done by upstream to move it to Qt 4? Qt 3 is no longer maintainer by Trolltech. Officially obsolete. So it will most likely be removed from Debian next release cycle. Yes, upstream is working on an upgrade to Qt 4. Initially this used compatibility libraries for Qt 3, but a 'true' Qt 4 version is on its way. Marco -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#495720: eekboek: Broken links in html documentation
Package: eekboek Version: 1.03.92-1 Severity: normal The html documentation for eekboek contains some broken links. Some of the missing files (all href'd from html/setup/index.html): - html/setup/relaties.html - html/setup/mutaties.html - html/setup/init.html There may be other pages missing, I haven't checked all links. I notice that these pages are available at http://www.eekboek.nl/docs. Best regards / vriendelijke groet, Marco -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429827: qtstalker: year later
Adam Majer wrote: It's a year later now since the bug was tagged pending. Do you still need a sponsor for this upload? So far, nothing seems to have happened for a year. Yes, status hasn't changed in a year. Qtstalker still needs a sponsor, though I must say I have given up trying to find one. I recently did an upload of the latest qtstalker release (0.36) to mentors.debian.net. The packages are also available from http://zwets.com/qtstalker. So to any potential sponsor listening in: feel welcome to help me out! Marco -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#418338: fglrx-driver: Fixed for me in 1:8-4-1
Package: fglrx-driver Followup-For: Bug #418338 This bug seems to be (finally!) fixed in 1:8-4-1, at least for my Radeon Mobility 9600 (M10). I have no more lockups when logging off or stopping gdm. Almost seems to be too good to be true :-) Marco -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.25-03z1 Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages fglrx-driver depends on: ii fglrx-glx 1:8-4-1proprietary libGL for the non-free ii libc6 2.7-10 GNU C Library: Shared libraries ii libgl1-mesa-glx [libgl1] 7.0.3-1A free implementation of the OpenG ii libx11-6 2:1.0.3-7 X11 client-side library ii libxext6 2:1.0.4-1 X11 miscellaneous extension librar ii libxrandr22:1.2.2-1 X11 RandR extension library ii libxrender1 1:0.9.4-1 X Rendering Extension client libra ii xserver-xorg 1:7.3+10 the X.Org X server Versions of packages fglrx-driver recommends: ii fglrx-glx 1:8-4-1proprietary libGL for the non-free ii fglrx-kernel-2.6.25-03z1 [fgl 1:8-4-1+r1 ATI binary kernel module for Linux ii fglrx-kernel-src 1:8-4-1kernel module source for the non-f -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#369121: proposed NMU for #454879
Hi Ian, Thank you for the patches to solve qtstalker's FTBFS. Let's hope your sponsor / AM will upload the fixes. My sponsor hasn't exactly been very reponsive ... I notice you're in the NM queue. Would you be interested in taking over qtstalker's maintenance, or could you help getting the current version (0.35) into Debian? I've had packages ready for ages now[1]. Note that 0.35 has a dependency on TA-Lib, so I packaged that as well[2] and filed an ITP[3]. It'd be great if you could be the uploader (or maintainer) for libta-lib as well. Best regards, Marco [1] http://www.zwets.com/qtstalker [2] http://www.zwets.com/ta-lib [3] http://bugs.debian.org/437177 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#474477: freemind: please upgrade to upstream version 0.8.1
Package: freemind Version: 0.7.1-6 Severity: wishlist Upstream has released an 0.8.1 version of freemind. Could you bring that version into Debian? Best regards, Marco -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#463576: please make lastmp provide virtual package mpd-client
Package: lastmp Version: 0.37-1 Severity: wishlist lastmp does not show up in the list of mpd-client packages suggested by mpd. If you add a 'Provides: mpd-client' dependency to the package, it will. Note that mpdscribble (a 'competitor' to lastmp) does show up, but that package didn't work for me. I accidentally stumbled into lastmp and it works fine. Thank you for doing the Debian maintenance! Best regards, Marco -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.24-01z1 Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages lastmp depends on: ii debconf [debconf-2.0] 1.5.18 Debian configuration management sy ii lastfmsubmitd 0.37-1 submission daemon for the Last.fm ii python2.4.4-6An interactive high-level object-o ii python-mpdclient 0.11.1-2 Python interface to MPD lastmp recommends no packages. -- debconf information excluded -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#451119: /usr/bin/fgl_glxgears: Same fgl_glxgears problem on x86
Package: fglrx-driver Version: 8.43.2-1 Followup-For: Bug #451119 Just for the record: contrary to what the original reporter mentions, fgl_glxgears doesn't work on 32-bit either. It produces the exact same error message here (GLXUnsupportedPrivateRequest). This is with version 8.43.2. fgl_glxgears -fbo and glxgears work fine. Let me grab the opportunity to extend a great THANK YOU to Romain for maintaining this troublesome package! Best regards, Marco -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.23-01z1 Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages fglrx-driver depends on: ii libc6 2.7-3 GNU C Library: Shared libraries ii libgl1-mesa-glx [libgl1] 7.0.2-2A free implementation of the OpenG ii libx11-6 2:1.0.3-7 X11 client-side library ii libxext6 1:1.0.3-2 X11 miscellaneous extension librar ii libxrandr22:1.2.2-1 X11 RandR extension library ii libxrender1 1:0.9.4-1 X Rendering Extension client libra ii xserver-xorg 1:7.2-5the X.Org X server Versions of packages fglrx-driver recommends: ii fglrx-kernel-2.6.23-01z1 [fg 8.43.2-1+r1 ATI binary kernel module for Linux ii fglrx-kernel-src 8.43.2-1kernel module source for the ATI g -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#446477: Confirming GNOME's New Login hangs
I can confirm this bug has been around for a long time (at least since 8.28). I suspect it to be related to the infamous Xorg hangs when logging out (a.o. 418338, 400743, 402375, and 345040), which has been plagueing us for nearly two years now. Sigh[1]. I can work around the hang at logout bug by having GDM restart X at each logout (by putting AlwaysRestartServer=true in the [daemon] section of /etc/gdm/gdm.conf). However, New Login still invariably results in a hang. :-( Best regards, Marco [1] Note: this sigh is not directed at Romain or Flavio. They're doing an excellent job. Many kudo's to you two! I just wish upstream would *finally* fix that bug. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#444772: libpdfbox-java: typo in short description: fpr should be for
Package: libpdfbox-java Severity: normal Please correct the typo in the word for in the short description. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 2.6.22-04z1 Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#437177: ta-lib packaged and waiting for upload by sponsor
I have just finished packaging ta-lib v0.3.0. The packages are waiting for approval by my Debian sponsor. The packages have been uploaded to mentors.debian.net. The are also apt-gettable from my site. Instructions are at http://www.zwets.com/ta-lib. Will mark this ITP bug as pending. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#439086: qtstalker-plugin-mysql packaged and waiting for upload by sponsor
I have just finished packaging qtstalker-plugin-mysql v0.34.0. The package is waiting for approval by my Debian sponsor. The package has been uploaded to mentors.debian.net. It is also apt-gettable from my site. More information at http://www.zwets.com/qtstalker. Will mark this ITP bug as pending. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#439086: ITP: qtstalker-plugin-mysql -- MySQL quote plugin for Qtstalker
Package: wnpp Severity: wishlist Owner: Marco van Zwetselaar [EMAIL PROTECTED] * Package name: qtstalker-plugin-mysql Version : 0.34.0 Upstream Author : Marco van Zwetselaar [EMAIL PROTECTED] * URL : http://www.zwets.com/qtstalker-plugin-mysql * License : GPL Programming Lang: C++ Description : MySQL quote plugin for Qtstalker Plugin for downloading quotes from a MySQL database into Qtstalker. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429827: Qtstalker 0.34 packages are ready
I have just finished packaging v0.34. The packages are waiting for approval by my Debian sponsor. The packages have been uploaded to mentors.debian.net. The are also apt-gettable from my site. Instructions are at http://www.zwets.com/qtstalker. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#437177: qtstalker
David Pradier wrote: ta-lib is necessary for the upgrade of qtstalker, which is currently at the 0.32 version. It would be useful to bump its version to 0.34 as the changelog (0.33) mentions things such as : 20060620: Fixed bug in Tester that did not calculate account balances properly as trades are made. We always ended up with a few 100 more unexplained dollars. Which is a fatal problem for a trading system. Depends on which side the balance ends ;-) So the severity could be seen not as a wish, but as a bug. Agreed, but the bug lies with the qtstalker package, which should upgrade to 0.34. See bug #429827. The bug you are sending this info to (#437177) is only the ITP for TA-Lib. This just states my intention to package (= ITP) TA-Lib. ITP bugs are always of wishlist severity. FYI: Qtstalker 0.34 is almost ready. Best regards, Marco -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429827: New upstream version available
Just to let you know: I have started work on packaging qtstalker 0.34 for Debian. I have filed an ITP for ta-lib[1] and am working on it. Once ta-lib gets accepted into Debian, qtstalker 0.34 can follow. Best regards, Marco [1] http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=437177 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#437177: ITP: ta-lib -- common functions for the technical analysis of financial market data
Package: wnpp Severity: wishlist Owner: Marco van Zwetselaar [EMAIL PROTECTED] * Package name: ta-lib Version : 0.3.0 Upstream Author : Mario Fortier [EMAIL PROTECTED] * URL : http://www.ta-lib.org/ * License : BSD Programming Lang: C/C++ Description : common functions for the technical analysis of financial market data TA-Lib is a set of libraries providing common functions for the technical analysis of financial market data. It contains over 130 TA indicators and offers candlestick pattern recognition. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#429827: New upstream version available
The upgrade to Qtstalker 0.34 involves quite a bit of work (including packaging the dependent ta-lib library, which isn't in Debian yet). My spare time currently is very limited, so I'm afraid I won't get around to do the packaging any time soon. Sorry. Best regards, Marco -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#398700: Not a fetchmail bug, is default exim4 configuration
Package: fetchmail Followup-For: Bug #398700 Patrick, have a look in your exim4 log (/var/log/exim4/mainlog). It will have lines saying: no immediate delivery: more than 10 messages received in one connection. In other words, these messages will be delivered in the next queue run, which by default is every 30 minutes. You could adjust the QUEUEINTERVAL parameter in /etc/default/exim4. -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-08z1 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages fetchmail depends on: ii adduser 3.101 Add and remove users and groups ii debianutils 2.17Miscellaneous utilities specific t ii gettext 0.16.1-1GNU Internationalization utilities ii libc62.3.6.ds1-8 GNU C Library: Shared libraries ii libssl0.9.8 0.9.8c-4SSL shared libraries ii lsb-base 3.1-22 Linux Standard Base 3.1 init scrip Versions of packages fetchmail recommends: ii ca-certificates 20061027 Common CA Certificates PEM files -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#406126: fetchmail daemon should not start in single mode
Package: fetchmail Version: 6.3.6~rc3-1 Severity: normal When I boot my system in 'single' mode, the fetchmail daemon starts up. This is not what I would expect; only the bare necessities should run in single mode. There is no link to /etc/init.d/fetchmail in /etc/rcS.d, which is good. I strongly suspect the daemon gets started by the script installed in /etc/resolvconf/update-libc.d/fetchmail. I use resolvconf (1.37) which by default starts in 'single' mode. Best regards, Marco -- System Information: Debian Release: 4.0 APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-08z1 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages fetchmail depends on: ii adduser 3.101 Add and remove users and groups ii debianutils 2.17Miscellaneous utilities specific t ii gettext 0.16.1-1GNU Internationalization utilities ii libc62.3.6.ds1-8 GNU C Library: Shared libraries ii libssl0.9.8 0.9.8c-4SSL shared libraries ii lsb-base 3.1-22 Linux Standard Base 3.1 init scrip Versions of packages fetchmail recommends: ii ca-certificates 20061027 Common CA Certificates PEM files -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#396266: options don't look right in solfege man page
Package: solfege Version: 3.6.3-1 Severity: minor Tom, The short options in the solfege man page show up with \fB prepended to them. Thank you for maintaining this useful package! Marco -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.18-03z1 Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Versions of packages solfege depends on: ii freepats 20060219-1 Free patch set for MIDI audio synt ii libc62.3.6.ds1-4 GNU C Library: Shared libraries ii python 2.4.3-11An interactive high-level object-o ii python-gnome22.12.4-5Python bindings for the GNOME desk ii python-gnome2-extras 2.14.2-1+b1 Python bindings for the GNOME desk ii python-gtk2 2.8.6-6 Python bindings for the GTK+ widge ii python-support 0.5.4 automated rebuilding support for p ii timidity 2.13.2-7.1 Software sound renderer (MIDI sequ solfege recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#345040: fglrx-driver: No console after logging out from Gnome/KDE/X
Flavio, I suggest unmarking this bug's 'patch' status too, since the patch has long been incorporated, and the problem still occurs. (Confirmed here.) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#355485: Info: bug probably fixed in latest upstream release
I have just built and tested the package using the latest upstream release (8.28.8). This seems to fix a substantial number of outstanding bugs for fglrx-driver. It also adds support for Xorg 7.1. Flavio, if you need a head start for the upgrade to 8.28.8, I have put my package up at http://zwets.com/debs. Most of the work was in reworking the make.sh and Makefile patches. Cheers, Marco -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#379856: bootsplash-theme-debian: lintian override filename typo
Package: bootsplash-theme-debian Version: 0.5-6 Severity: minor The lintian override filename contains a superfluous H. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.17-3z1 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages bootsplash-theme-debian depends on: ii debconf [debconf-2.0] 1.5.2 Debian configuration management sy bootsplash-theme-debian recommends no packages. -- debconf information: * shared/bootsplash-theme: bootsplash-theme-debian * bootsplash-theme-debian/resolutions: 1024x768 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#365670: nautilus: shows irrelevant mounted filesystems on the desktop
Package: nautilus Version: 2.12.2-2 Severity: normal Since some time[1], Nautilus is showing icons on my desktop for /usr/local and /var/root. These filesystems have no special options in /etc/fstab: /dev/hda7 /usrext2defaults 0 2 /dev/hda12 /usr/local ext2defaults 0 2 /dev/hda8 /varext2defaults 0 2 /dev/hda13 /var/root ext2defaults 0 2 so I wouldn't expect them to show up on the desktop. I can disable their appearance by unsetting the volumes_visible option in gconf, but then my 'truly hotplugged' filesystems don't show up either. Best regards, Marco [1] I'm sorry, I don't know exactly when this started; it may have started with the 2.10 - 2.12 upgrade. -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-9z1 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages nautilus depends on: ii desktop-file-utils 0.10-1 Utilities for .desktop files ii gconf2 2.14.0-1GNOME configuration database syste ii gnome-control-center 1:2.12.3-2 utilities to configure the GNOME d ii libart-2.0-2 2.3.17-1Library of functions for 2D graphi ii libatk1.0-0 1.11.3-1The ATK accessibility toolkit ii libaudiofile00.2.6-6 Open-source version of SGI's audio ii libbonobo2-0 2.14.0-1Bonobo CORBA interfaces library ii libbonoboui2-0 2.14.0-2The Bonobo UI library ii libc62.3.6-7 GNU C Library: Shared libraries ii libcairo21.0.4-1+b1 The Cairo 2D vector graphics libra ii libeel2-22.12.2-3Eazel Extensions Library (for GNOM ii libesd-alsa0 [libesd0] 0.2.36-3Enlightened Sound Daemon (ALSA) - ii libexif120.6.13-4library to parse EXIF files ii libfontconfig1 2.3.2-5.1 generic font configuration library ii libgail-common 1.8.11-1GNOME Accessibility Implementation ii libgail171.8.11-1GNOME Accessibility Implementation ii libgconf2-4 2.14.0-1GNOME configuration database syste ii libglade2-0 1:2.5.1-2 library to load .glade files at ru ii libglib2.0-0 2.10.2-1The GLib library of C routines ii libgnome-desktop-2 2.14.0-1Utility library for loading .deskt ii libgnome-keyring00.4.9-1 GNOME keyring services library ii libgnome2-0 2.14.0-2The GNOME 2 library - runtime file ii libgnomecanvas2-02.14.0-2A powerful object-oriented display ii libgnomeui-0 2.14.0-1The GNOME 2 libraries (User Interf ii libgnomevfs2-0 2.14.0-2GNOME virtual file-system (runtime ii libgtk2.0-0 2.8.16-1The GTK+ graphical user interface ii libice6 6.9.0.dfsg.1-6 Inter-Client Exchange library ii libnautilus-extension1 2.12.2-2libraries for nautilus components ii liborbit21:2.14.0-1 libraries for ORBit2 - a CORBA ORB ii libpango1.0-01.12.1-2Layout and rendering of internatio ii libpopt0 1.7-5 lib for parsing cmdline parameters ii librsvg2-2 2.14.2-1SAX-based renderer library for SVG ii libsm6 6.9.0.dfsg.1-6 X Window System Session Management ii libstartup-notification0 0.8-1 library for program launch feedbac ii libx11-6 6.9.0.dfsg.1-6 X Window System protocol client li ii libxcursor1 1.1.3-1 X cursor management library ii libxext6 6.9.0.dfsg.1-6 X Window System miscellaneous exte ii libxi6 6.9.0.dfsg.1-6 X Window System Input extension li ii libxinerama1 6.9.0.dfsg.1-6 X Window System multi-head display ii libxml2 2.6.23.dfsg.2-3 GNOME XML library ii libxrandr2 6.9.0.dfsg.1-6 X Window System Resize, Rotate and ii libxrender1 1:0.9.0.2-1 X Rendering Extension client libra ii nautilus-data2.12.2-2data files for nautilus ii shared-mime-info 0.17-1 FreeDesktop.org shared MIME databa ii zlib1g 1:1.2.3-11 compression library - runtime Versions of packages nautilus recommends: ii desktop-base 0.3.16 common files for the Debian Deskto ii eject 2.1.4-1ejects CDs and operates CD-Changer ii nautilus-cd-burner2.12.3-1 CD Burning front-end for Nautilus -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL
Bug#355485: fglrx-driver: Confirming bug persists in 2.6.16 (no console after logging out of X)
Package: fglrx-driver Version: 8.23.7-1 Followup-For: Bug #355485 Ciao Flavio, I have compiled a 2.6.16 kernel using CONFIG_OBSOLETE_INTERMODULE=y, which provides the inter_module functions. The fglrx kernel module loads fine and gives me 3D accel, but I still have Luigi's problem. Regards, Marco PS: thanks for maintaining this package! PPS: I couldn't find a bug report for the missing inter_module dependencies, shall I file one against fglrx-kernel-source? -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.16-7z2 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages fglrx-driver depends on: ii libc6 2.3.6-3GNU C Library: Shared libraries an ii libstdc++51:3.3.6-13 The GNU Standard C++ Library v3 ii libx11-6 6.9.0.dfsg.1-6 X Window System protocol client li ii libxext6 6.9.0.dfsg.1-6 X Window System miscellaneous exte ii xserver-xorg 6.9.0.dfsg.1-6 the X.Org X server Versions of packages fglrx-driver recommends: ii fglrx-kernel-2.6.16-7z2 [fgl 8.23.7-1+r1 ATI binary kernel module for Linux -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#344724: qtstalker: Please upgrade to a newer libdb
This is one of only three packages in Debian still using libdb2. I know, I know. I have an 0.32 ready, which uses libdb4.3 (and is generally much better than the 0.26 currently in Debian), but I still haven't got a sponsor to upload it :-( Marco PS: DDs reading this: please consider sponsoring an upload. The latest packages are at mentors.debian.net and at http://zwets.com/qtstalker. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#343806: Please upgrade build depends to libmysqlclient15-dev
Christian, I'd love to do the upgrade, but have given up finding a sponsor ... I have a fresh 0.32-3 version here (the 0.26 in sid is from mid-2004), built against libmysqlclient15-dev. If you'd be willing to sponsor it, you'd make me very happy. Otherwise, you're welcome to NMU the current sid version (0.26-5.1). It should work just fine if you bump the build depends and suggests from 14 to 15 (and remove the version requirements on them, which are superfluous). Best regards, Marco -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#342478: ipw2100-source: no need to depend on module-assistant
Package: ipw2100-source Version: 1.1.3-1 Severity: wishlist ipw2100-source currently Depends on module-assistant. I suggest downgrading that to a Recommends or a Suggests, since there is no necessity to have module-assistant. For instance, people building their own kernel don't need it. Best regards, Marco -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.14-4z1 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages ipw2100-source depends on: ii debconf [debconf-2.0] 1.4.59 Debian configuration management sy ii debhelper 5.0.7 helper programs for debian/rules ii ieee80211-source 1.1.6-2Source for the 802.11 (wireless) n ii module-assistant 0.10 tool to make module package creati ipw2100-source recommends no packages. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#336483: nvidia-kernel-source: does not work on kernel 2.6.14
Does this still happen under the newest nvidia-kernel-common? The new init script is suppose to handle making the devices. Just upgraded to the 20051028+1 from unstable. It works fine. Thanks! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#336483: nvidia-kernel-source: does not work on kernel 2.6.14
Package: nvidia-kernel-source Version: 1.0.7174-4 Severity: normal The nVidia kernel module does not work on linux kernel 2.6.14.i It installs fine and modprobe does not give error messages, but no /dev/nvidia* devices show up. This is acknowledged by zander from nVidia Corporation in http://www.nvnews.net/vbulletin/showthread.php?p=715440, where he states that that the pre-7676 modules will not work together with sysfs/udev. BTW: I have the module working fine on kernel 2.6.12. Best regards, Marco -- System Information: Debian Release: testing/unstable APT prefers testing APT policy: (990, 'testing'), (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.12-10z1 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages nvidia-kernel-source depends on: ii debhelper 4.9.13 helper programs for debian/rules ii dpatch2.0.15 patch maintenance system for Debia ii make 3.80-11The GNU version of the make util ii sed 4.1.2-8The GNU sed stream editor Versions of packages nvidia-kernel-source recommends: ii devscripts2.9.8 Scripts to make the life of a Debi ii kernel-package9.008 A utility for building Linux kerne ii nvidia-glx1.0.7174-4 NVIDIA binary XFree86 4.x driver -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#327990: qtstalker: uninstallable; needs rebuild for the Qt/KDE transition
Note to NMU-ers: I will very much welcome your NMU of qtstalker. Since I am not a DD, I depend on the willingness of a sponsor to perform the upload. I've tried finding a sponsor several times, unfortunately without success. So please do the NMU. However, if you do, please consider uploading the most recent version of qtstalker (0.32-2). It is more mature than the 0.26-5 version which is currently in testing. The debs are up at mentors.debian.net[1] and at my personal site[2]. You'd make me (and the other Qtstalker users!) very happy. Best regards, Marco [1] http://mentors.debian.net/debian/pool/main/q/qtstalker/ [2] http://www.zwets.com/debs/unstable/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#321318: acknowledged by developer (Fixed in new package upload)
Matthew, To: [EMAIL PROTECTED] Subject: Fixed in new package upload This should be fixed in the latest upload. Just a minor point: since this bug is fixed by an upload, why do you close it using email to its -done address? Marco -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#321318: hotkey-setup: package contains no binaries or (init) scripts
Package: hotkey-setup Version: 0.1-1 Severity: normal The package does not contain the init script that its README.Debian refers to. As a consequence, it doesn't actually do anything. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#319370: lintian: duplicate fields in debian/control erroneously tagged as errors
Package: lintian Version: 1.23.10 Severity: normal Probably as a consequence of the fix for bug #299792, lintian now flags duplicate fields in different paragraphs of debian/control as an error (debian-control-with-duplicate-fields). The duplication check should not span across paragraphs. Multiple binary packages generated from a single source can very well have different Depends fields (or Architecture, Suggests, etc). -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.11-6z1 Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Versions of packages lintian depends on: ii binutils 2.16.1-2 The GNU assembler, linker and bina ii diffstat 1.39-1produces graph of changes introduc ii file 4.12-1Determines file type using magic ii gettext0.14.5-2 GNU Internationalization utilities ii intltool-debian0.30+20040213 Help i18n of RFC822 compliant conf ii man-db 2.4.3-1 The on-line manual pager ii perl [libdigest-md5-perl] 5.8.7-4 Larry Wall's Practical Extraction lintian recommends no packages. -- no debconf information -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#317049: lintian: Package description mentions calibration for policy 3.6.1
Package: lintian Version: 1.23.9 Severity: normal The last sentence of lintian's package description states that it is calibrated for policy version 3.6.1. This line should be updated or removed. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#306240: qtstalker: FTBFS: Versioned Build-Depends on virtual package 'libmysqlclient-dev'
Please change the Build-Depends to 'libmysqlclient12-dev' in debian/control. Or libmysqlclient14-dev, which is the version that upstream currently recommends. I've bumped it to 14 in qtstalker 0.29-2, which I'll upload to m.d.n in a second. I'll be very grateful to the DD who will pick it up from there and NMU / sponsor it.[2] Unfortunately, since I have no ongoing interest in this package, I'm not really willing to do the work behind sponsoring a new upstream version of it. If you could prepare a 0.26-4 version that fixes this particular bug, I'd be happy to sponsor that. Thanks Steve, I've just uploaded 0.26-5 to m.d.n.. It fixes this FTBFS and another potential build-related problem. The diff with 0.26-3 is pretty minimal, so it shouldn't be a lot of work for you. Thanks for picking this up. Marco -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#306240: qtstalker: FTBFS: Versioned Build-Depends on virtual package 'libmysqlclient-dev'
Hello Steve, Andreas, Please change the Build-Depends to 'libmysqlclient12-dev' in debian/control. This bug was fixed long ago, and a new version (0.29-1) has been waiting at mentors.debian.net[1] for months. I would love to see it go into Debian, but my sponsor has been very reluctant, and now seems to have gone without a trace. ... lemme tell you how an orphaned package must feel ;-( Or libmysqlclient14-dev, which is the version that upstream currently recommends. I've bumped it to 14 in qtstalker 0.29-2, which I'll upload to m.d.n in a second. I'll be very grateful to the DD who will pick it up from there and NMU / sponsor it.[2] Best regards, Marco [1] http://mentors.debian.net/debian/pool/main/q/qtstalker/ [2] And eternally grateful I s/he would be willing to take up my sponsorship / advocacy ... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Bug#302639: qtstalker: deb updated on sourceforge though not in debian !
Bonjour Alban, Thank you for your bug report. I have installed your package from sourceforge but wonder why it is not available in debian The reason the Debian version lags this much is that I am not an official Debian developer (DD), but depend on a so-called sponsor (a DD) to upload my packages into the Debian archives. The problem is, my sponsor has been rather unresponsive over the last year :-( However, your bug report has triggered me to work on a fix :-) Either I will get my sponsor to be more involved, or I'll find a new sponsor. Either way, I'll make sure a newer Qtstalker version gets into Debian soon. It is a pity already that the 0.29 version will likely not make it into the Sarge stable release :-( Well and why it still use db2 but i agree that fixing bugs in qtstalker is more important than upgrading to a maybe version of a new db release (notwithstanding the upgrade process). Upstream is working on an upgrade to the 4+ stream of BDB, so this will eventually be fixed. Best regards, Marco -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
