Bug#1020315: bind9: Spams /var/log/syslog with appramor DENIED /sys/kernel/mm/transparent_hugepage/enabled

[Debian bugreport]

Package: bind9
Version: 1:9.18.6-2
Severity: normal
Tags: patch
X-Debbugs-Cc: pkg-apparmor-t...@lists.alioth.debian.org

With apparmor enabled for named, the /var/log/syslog file ends up with 
allot of unnecessary DENIED messages,
as the as read access to/sys/kernel/mm/transparent_hugepage/enabled 
seems to have accidentally excluded by the hardening.

Restoring the read access seems to resolve the issue, see attached patch.


Examples:
/var/log/syslog:Sep 18 00:45:12 pippi kernel: [568935.135647] audit: 
type=1400 audit(1663454712.445:191): apparmor="DENIED" operation="open" 
profile="named" name="/sys/kernel
/mm/transparent_hugepage/enabled" pid=234038 comm="named" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
/var/log/syslog:Sep 18 01:54:18 pippi kernel: [573081.399636] audit: 
type=1400 audit(1663458858.813:192): apparmor="DENIED" operation="open" 
profile="named" name="/sys/kernel
/mm/transparent_hugepage/enabled" pid=235380 comm="named" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
/var/log/syslog:Sep 18 03:26:40 pippi kernel: [578622.720520] audit: 
type=1400 audit(1663464400.273:193): apparmor="DENIED" operation="open" 
profile="named" name="/sys/kernel
/mm/transparent_hugepage/enabled" pid=236920 comm="named" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
/var/log/syslog:Sep 18 04:42:21 pippi kernel: [583163.451230] audit: 
type=1400 audit(1663468941.119:194): apparmor="DENIED" operation="open" 
profile="named" name="/sys/kernel
/mm/transparent_hugepage/enabled" pid=237915 comm="named" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
/var/log/syslog:Sep 18 05:50:00 pippi kernel: [587222.657447] audit: 
type=1400 audit(1663473000.425:195): apparmor="DENIED" operation="open" 
profile="named" name="/sys/kernel
/mm/transparent_hugepage/enabled" pid=239109 comm="named" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
/var/log/syslog:Sep 18 07:15:15 pippi kernel: [592337.151577] audit: 
type=1400 audit(1663478115.049:196): apparmor="DENIED" operation="open" 
profile="named" name="/sys/kernel
/mm/transparent_hugepage/enabled" pid=243061 comm="named" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
/var/log/syslog:Sep 18 08:42:55 pippi kernel: [597597.185578] audit: 
type=1400 audit(1663483375.213:197): apparmor="DENIED" operation="open" 
profile="named" name="/sys/kernel
/mm/transparent_hugepage/enabled" pid=247004 comm="named" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
/var/log/syslog:Sep 18 09:52:30 pippi kernel: [601772.451830] audit: 
type=1400 audit(1663487550.586:198): apparmor="DENIED" operation="open" 
profile="named" name="/sys/kernel
/mm/transparent_hugepage/enabled" pid=248343 comm="named" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
/var/log/syslog:Sep 18 11:12:27 pippi kernel: [606569.547243] audit: 
type=1400 audit(1663492347.802:199): apparmor="DENIED" operation="open" 
profile="named" name="/sys/kernel
/mm/transparent_hugepage/enabled" pid=252396 comm="named" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
/var/log/syslog:Sep 18 12:25:25 pippi kernel: [610946.891663] audit: 
type=1400 audit(1663496725.256:200): apparmor="DENIED" operation="open" 
profile="named" name="/sys/kernel
/mm/transparent_hugepage/enabled" pid=254642 comm="named" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
/var/log/syslog:Sep 18 13:50:03 pippi kernel: [616024.685028] audit: 
type=1400 audit(1663501803.180:201): apparmor="DENIED" operation="open" 
profile="named" name="/sys/kernel
/mm/transparent_hugepage/enabled" pid=257604 comm="named" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
/var/log/syslog:Sep 18 15:05:34 pippi kernel: [620555.410211] audit: 
type=1400 audit(1663506334.014:202): apparmor="DENIED" operation="open" 
profile="named" name="/sys/kernel
/mm/transparent_hugepage/enabled" pid=260179 comm="named" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
/var/log/syslog:Sep 18 16:37:47 pippi kernel: [626088.694992] audit: 
type=1400 audit(1663511867.436:203): apparmor="DENIED" operation="open" 
profile="named" name="/sys/kernel
/mm/transparent_hugepage/enabled" pid=262246 comm="named" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
/var/log/syslog:Sep 18 18:00:21 pippi kernel: [631042.827598] audit: 
type=1400 audit(1663516821.692:204): apparmor="DENIED" operation="open" 
profile="named" name="/sys/kernel
/mm/transparent_hugepage/enabled" pid=264295 comm="named" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
/var/log/syslog:Sep 18 19:15:41 pippi kernel: [635562.798692] audit: 
type=1400 audit(1663521341.781:205): apparmor="DENIED" operation="open" 
profile="named" name="/sys/kernel
/mm/transparent_hugepage/enabled" pid=267350 comm="named" 
requested_mask="r" denied_mask="r" fsuid=0 ouid=0
/var/log/syslog:Sep 18 20:43:37 pippi kernel: [640838.555665] audit: 
type=1400 audit(1663526617.670:206): apparmor="DENIED" operation="open" 
profile="named" name="/sys/kernel
/mm/transparent_hugepage/enabled" pid=268844 comm="named" 
requested_mask="r" denied_mask=

Bug#852278: usb: power-bank load via usb is not working

[BugReport]

Package: usbutils
Version: 1:007-2
Severity: normal
File: usb

Dear Maintainer,

*** Reporter, please consider answering these questions, where appropriate ***

   * I tried to load a mobile powerbank IAP 4000 fom ISY via USB-Interface. 
 There were no problems doing this till now 
   * Now the powerbank is not loaded. A rec light near USB Interface at 
 notebook (lenovo T60) is on.
   * It seemes to me that there is a problem with USB Interface hardware?

*** End of the template - remove these template lines ***


-- System Information:
Debian Release: 8.6
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)

Kernel: Linux 3.16.0-4-686-pae (SMP w/2 CPU cores)
Locale: LANG=de_AT.UTF-8, LC_CTYPE=de_AT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages usbutils depends on:
ii  libc6 2.19-18+deb8u6
ii  libusb-1.0-0  2:1.0.19-1
ii  zlib1g1:1.2.8.dfsg-2+b1

usbutils recommends no packages.

Versions of packages usbutils suggests:
ii  wget  1.16-1+deb8u1

-- no debconf information

Bug#813354: Ricochet im UI doesn't display characters correctly

[bugreport]

Package: ricochet-imVersion: 1.1.1-2+b1When launching the program by command 
`ricochet`, the font displayed on UI (as shown at http://imgur.com/8kfxw9p) 
is meaningless (characters can't be recognized and change the language 
setting still display black block characters). I am using Debian GNU/ Linux 
stretch/sid, kernel 4.0.0-2-rt-686-pae, and locale en_US.UTF-8$ which 
ricochet/usr/bin/ricochet$ type ricochetricochet is /usr/bin/ricochet$ dpkg 
--search /usr/bin/ricochetricochet-im: /usr/bin/ricochet$ dpkg --list 
ricochet-im
Desired=Unknown/Install/Remove/Purge/Hold| 
Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend|/ 
Err?=(none)/Reinst-required (Status,Err: uppercase=bad)||/ Name           
Version      Architecture 
Description+++-==---=ii
 
 ricochet-im    1.1.1-2+b1   i386         anonymous metadata-resistant inst$ 
dpkg --status ricochet-imPackage: ricochet-imStatus: install ok 
installedPriority: optionalSection: netInstalled-Size: 4524Maintainer: Debian 
Privacy Tools Maintainers 
Architecture: i386Source: 
ricochet-im (1.1.1-2)Version: 1.1.1-2+b1Depends: libasan2 (>= 5), libc6 (>= 
2.4), libgcc1 (>= 1:4.1.1), libgl1-mesa-glx | libgl1, libprotobuf9v5, 
libqt5core5a (>= 5.5.0), libqt5gui5 (>= 5.1.0), libqt5multimedia5 (>= 5.0.2), 
libqt5network5 (>= 5.0.2), libqt5qml5 (>= 5.1.0), libqt5quick5 (>= 5.0.2), 
libqt5widgets5 (>= 5.0.2), libssl1.0.2 (>= 1.0.2d), libstdc++6 (>= 5.2), 
libubsan0 (>= 5), qml-module-qtquick-controls, qml-module-qtquick-dialogs, 
qml-module-qtmultimedia, tor (>= 0.2.6)Description: anonymous 
metadata-resistant instant messaging Ricochet is an experiment with a 
different kind of instant messaging that doesn't trust anyone with your 
identity, your contact list, or your communications. .   - You can chat 
without exposing your identity (or IP address) to anyone   - Nobody can 
discover who your contacts are or when you talk (metadata-free)   - There are 
no servers or operators to compromise that could access your     information  
 - It's cross-platform and easy for non-technical users .
 Ricochet is a peer-to-peer instant messaging system built on Tor 
hidden services. Your login is your hidden service address, and contacts 
connect to you (not an intermediate server) through Tor. The rendezvous 
system makes it extremely hard for anyone to learn your identity from your 
address. . Ricochet is not affiliated with or endorsed by The Tor Project. 
For more information, you can read about Tor and learn about Ricochet's 
design or protocol (or the old protocol). Everything is open-source and open 
to contribution. . **This software is an experiment**. It hasn't been audited 
or formally reviewed by anyone. Security and anonymity are difficult topics, 
and you should carefully evaluate your risks and exposure with any software. 
Do not rely on Ricochet for your safety.Homepage: 
https://github.com/ricochet-im/ricochet

Bug#778627: live-build: syslinux mbr.bin file not found (again)

[sage-debian-live-bugreport]

Hi,

migrating to jessie, i am experiencing the same problem.

Currently live-build is broken on jessie, which distributes version
4.0.3-1 of live-build, not 4.0.4-1. It is currently not possible to build
hdd images, hence it could be very nice to consider this bug as important
and provide a fix to jessie.

Thanks,
Thierry


-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#678341: Bugs 678341 and 678176 look like duplicates

[bugreport]

Hi there,

these bugs look like duplicates. There might be more duplicates, because 
of the nature of the bug.


http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=678341

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=678176


Malte



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#678341: Digikam crashes when trying to adjust timestamp or geo tag of an image

[bugreport]

Package: digikam
Version: 4:2.6.0-1

Hi there,

when I try to adjust the timestamps of a picture and open the 
corresponding dialogue, Digikam crashes. Same with the geo localization 
dialogue. This behaviour is new and came with some recent updates of 
packages other than Digikam. Because when I used the very same version 
of Digikam before (I had updated right away, when it was uploaded), it 
would display wrong timestamps and/or get mixed up when I adjusted the 
timestamps. When adjusting metatags I prefer an application crashing 
than an application that would get the metatags wrong.


In my installation the following packages (among others) were held back 
in connection with the switch from MySQL 5.1 to 5.5: libqt4-sql 
libqt4-sql-sqlite. I just upgraded MySQL and these packages. But Digikam 
still crashes.


Thx,

Malte




--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#675086: No change with KDE 4.8.3

[bugreport]

Hi there,

I have the same bug in the current Digikam package (I also had this 
problem in the one before that). Rotation is not possible. Usually I 
rotate not by hand, but by using the Exif information. I get the same 
result.


So I installed KDE 4.8.3 with these instructions [1] to see if the 
problem is solved in this. It is not.


Thx,

Malte

[1] http://qt-kde.debian.net/



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#670297: iceweasel: JAVA either does not run or locks up Iceweasel, AMD-64 version

[bugreport]

Package: iceweasel
Version: 3.5.16-13
Severity: normal

Connecting to http://javatester.org/ results in Iceweasel locking up.
Attempting to run the radar loop from
http://radar.weather.gov/radar.php?rid=akq&product=N0R&overlay=1110&loop=no
results in a blank frame. Note: the radar download worked on a previous version
of Iceweasel, with a privious version of JAVA.



-- Package-specific info:

-- System Information:
Debian Release: 6.0.4
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages iceweasel depends on:
ii  debianutils  3.4 Miscellaneous utilities specific t
ii  fontconfig   2.8.0-2.1   generic font configuration library
ii  libc62.11.3-2Embedded GNU C Library: Shared lib
ii  libglib2.0-0 2.24.2-1The GLib library of C routines
ii  libgtk2.0-0  2.20.1-2The GTK+ graphical user interface 
ii  libnspr4-0d  4.8.6-1 NetScape Portable Runtime Library
ii  libstdc++6   4.4.5-8 The GNU Standard C++ Library v3
ii  procps   1:3.2.8-9   /proc file system utilities
ii  xulrunner-1.9.1  1.9.1.16-13 XUL + XPCOM application runner

iceweasel recommends no packages.

Versions of packages iceweasel suggests:
ii  libgssapi-krb5-21.8.3+dfsg-4squeeze5 MIT Kerberos runtime libraries - k
ii  libkrb531.8.3+dfsg-4squeeze5 transitional package for MIT Kerbe
ii  mozplugger  1.14.1-1 Plugin allowing external viewers t
pn  ttf-lyx | latex-xft(no description available)
pn  ttf-mathematica4.1 (no description available)
pn  xfonts-mathml  (no description available)
ii  xprint  2:1.6.0-4X11 print system (binary)

Versions of packages xulrunner-1.9.1 depends on:
ii  libasound21.0.23-2.1 shared library for ALSA applicatio
ii  libatk1.0-0   1.30.0-1   The ATK accessibility toolkit
ii  libbz2-1.01.0.5-6+squeeze1   high-quality block-sorting file co
ii  libc6 2.11.3-2   Embedded GNU C Library: Shared lib
ii  libcairo2 1.8.10-6   The Cairo 2D vector graphics libra
ii  libdbus-1-3   1.2.24-4+squeeze1  simple interprocess messaging syst
ii  libfontconfig12.8.0-2.1  generic font configuration library
ii  libfreetype6  2.4.2-2.1+squeeze4 FreeType 2 font engine, shared lib
ii  libgcc1   1:4.4.5-8  GCC support library
ii  libglib2.0-0  2.24.2-1   The GLib library of C routines
ii  libgtk2.0-0   2.20.1-2   The GTK+ graphical user interface 
ii  libhunspell-1.2-0 1.2.11-1   spell checker and morphological an
ii  libjpeg62 6b1-1  The Independent JPEG Group's JPEG 
ii  libmozjs2d1.9.1.16-13The Mozilla SpiderMonkey JavaScrip
ii  libnspr4-0d   4.8.6-1NetScape Portable Runtime Library
ii  libnss3-1d3.12.8-1+squeeze4  Network Security Service libraries
ii  libpango1.0-0 1.28.3-1+squeeze2  Layout and rendering of internatio
ii  libpng12-01.2.44-1+squeeze4  PNG library - runtime
ii  libreadline6  6.1-3  GNU readline and history libraries
ii  libsqlite3-0  3.7.3-1SQLite 3 shared library
ii  libstartup-notificati 0.10-1 library for program launch feedbac
ii  libstdc++64.4.5-8The GNU Standard C++ Library v3
ii  libx11-6  2:1.3.3-4  X11 client-side library
ii  libxrender1   1:0.9.6-1  X Rendering Extension client libra
ii  libxt61:1.0.7-1  X11 toolkit intrinsics library
ii  zlib1g1:1.2.3.4.dfsg-3   compression library - runtime

-- no debconf information



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#668602: Using IMAP Peek option so email read/unread status is not changed

[bugreport]

Package: getmail4
Version: 4.20.0-1
Severity: wishlist

Hi there,

I would like to back up mails stored in a GMail account automatically on 
a regular basis, while still using said GMail accout. Since I personally 
don't need to preserve the folder structure and don't want copies, I 
just use the "All Mail" folder.


Tools like offlineimap, imapsync and such (all in Debian) can't do this, 
since they propagate changes back and forth. So if I move a backup mail, 
it would be deleted in GMail and if I delete a mail in GMail, it would 
delete this same mail from my backup.


I tried Fetchmail, but it utterly fails, because it only downloads 
unread mails or all mails over and over every time it starts, because it 
doesn't keep it's own database.


In fact, Getmail seems to be the only tool useful for such a job. 
Unfortunately, Getmail will mark all mails as read, once it runs. So if 
I run it at night, all mails that arrive after I switched off the mail 
client will be marked as read when I turn the "normal" client back on.


This could be prevented if Getmail would use the "peek" option. In this 
[1] discussion, the author of Getmail indicated [2], that he won't 
implement it, because it doesn't work properly with all IMAP servers.


Because of that, someone created a fork [3], in which Getmail uses the 
peek option. But only optional. The default behaviour is to act like the 
standard Getmail.


This is exactly how I would like Getmail to work. Have an peek available 
as an option.


It would also be interesting to know exactly which servers and widely 
used IMAP services (AOL, GMail, etc.) don't work well with the "peek" 
option. Maybe have a list available, or even implement it directly in 
Getmail, so it will tell you when it thinks that the peek option is 
unsafe, because it is connecting to an incompatible imap server.


thx,

Malte

[1] http://comments.gmane.org/gmane.mail.getmail.user/3899
[2] http://permalink.gmane.org/gmane.mail.getmail.user/3915
[3] https://github.com/alyandon/getmail-peek



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#666522: b43 driver couldn't find firmware files

[bugreport]

Package: firmware-b43-installer
Version: 1:015-12


Hi there,

my b43 driver (package linux-image-3.2.0-2-686-pae) couldn't find the 
firmware files. So I copied them from /lib/firmware/b43/b43/*fw to 
/lib/firmware/b43/*fw


Now the b43 driver can find the firmware files perfectly.

Malte



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#655404: firmware-linux-nonfree Radeon R300-family problem

[bugreport]

Package: firmware-linux-nonfree
Version: 0.34
Severity: low

Hi there,

I recently tried to install a couple distributions on a Fujitsu Amilo M 
1420 laptop. Kubuntu 11.10, Fedora 16 and PCLinuxOS KDE 2011 all crashed 
either during install or when booting the installed system. Debian 
Squeeze installed fine. Until I installed the firmware-linux-nonfree 
package to get rid of the missing microcode error message from xorg. If 
firmware-linux-nonfree is installed under Wheezy the system won't boot 
properly. In Squeeze it is still possible to remove the 
firmware-linux-nonfree package and reboot, but you first have to stop 
the error messages spamming the console. X11 won't work at all. Trying 
to use it will lock the machine.


This problem could be related to the Xorg-Radeon driver as well as a 
hardware bug in either the ATI Mobility Radeon 9600 PRO (RV350) chip 
generally, of this particular laptop or even this very machine. 
Nonetheless, removing or not installing firmware-linux-nonfree is my 
current workaround. The graphics still work fine.


thx,

Malte



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#651121: After xm restore dumU freezes

[debian bugreport]

Package: linux-image-2.6.32-5-xen-amd64
Version: 2.6.32-38

Steps to reproduce:
/usr/sbin/xm save TEST /xen/domains/TEST/checkpoint
/usr/sbin/xm restore /xen/domains/TEST/checkpoint
xm console # hangs, no input possible

Worked with older version about 2 months ago. Not working since update to 
2.6.32-38.
___
SMS schreiben mit WEB.DE FreeMail - einfach, schnell und
kostenguenstig. Jetzt gleich testen! http://f.web.de/?mc=021192



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#636685: Servers now mostly close to 2.0 version

[bugreport]

Hi,

an upgraded package to 2.4 would, indeed, be nice to have.

Cheers,

Malte



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#597223: udev: The First partition on USB flashdrives always attempts to be mounted as ISOFS

[anderson . bugreport]

The problem seems to be that if the usb-device (hdd,cardreader,etc.) is 
plugged in while resp. before booting debian gets 'confused' about the 
device(s).


I am able to reproduce the problem:
USB HDD plugged in while booting : "UDF-fs: No VRS found", as mentioned 
in this bugreport.
USB HDD plugged out while booting an plugged in after the desktop is up, 
the HDD gets automounted as it should


It is the same like with a cardreader:
I have a cardreader connected to the mainboard usb-pins (stationary) - 
when inerting cards, I get the "UDF-fs: No VRS found". I have another 
cardreader (mobile) - when I plug in the card AFTER I plugged in the 
cardReader to a usb port I got the VRS-Message; when I plug in the card 
into the cardReader BERFORE, the card gets mounted as it should.


debian OS last update 11.04.2011

If you need some more details, pls let me know.


Cheers,
Anderson





--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#611662: kwallet hides behind splash screen, amarok stuck

[bugreport]

Package: amarok
Version: 2.3.1-1
Severity: low

Hi there,

I run IceWM and when I start Amarok it wants to open KWallet. The 
KWallet password entry windows appears next to the Amarok splash screen. 
But when I type in a wrong password, KWallet will hide behind the Amarok 
splash screen and wait for the next try.
I can easily rectify this situation by clicking on the splash screen to 
make it disappear, but that did not occur to me the first time it 
happened. I was wondering why Amarok didn't start up and thought it crashed.


This might be a KWallet bug, but I don't use any other KWallet-dependent 
programs. So...


Cheers,

Malte



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#607797: boot hangs with pcspkr driver error

[bugreport]

Package: udev
Version: 164-3

Hi there,

I just installed Debian Squeeze on my Thinkpad X41 notebook. Then 
installed a couple packages and on reboot the system hangs on this message:


Waiting for /dev to be fully populated... [12.612160] Error: Driver 
'pcspkr' is already registered, aborting ...


Everything is standard, I did not yet change anything. I replaced the 
standard hd with a compact flash module and therefore used the btrfs 
filesystem for my root/home drive (boot drive is seperate) and also 
encrypted it using the installer (encrypt drive using luks).


System booted fine twice when I first installed it. Only hangs after 
installing a whole bunch of desktop related packages, among them udev. 
Feel free to move this bug to an appropriate package if you think udev 
is not responsible.


Thx,

Malte



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#604405: AMD64 "rsyslogd was HUPed, type 'lightweight"

[bugreport]

Package: rsyslog
Version: 4.6.4-1

Hi there,

I have this in my /var/log/messages
Nov 21 10:51:57 kalypso rsyslogd: [origin software="rsyslogd" 
swVersion="4.6.4" x-pid="1494" x-info="http://www.rsyslog.com";] rsyslogd 
was HUPed, type 'lightweight'.
Nov 21 22:16:07 kalypso kernel: [845766.615554] udev[8562]: starting 
version 164


That is all. Nothing more, nothing less. If I restart rsyslogd I won't 
get the error message, but also nothing more. No system logs at all. 
When I reboot I will get all the boot messages and cron-apt sometimes 
manages to put something in there. Here is another couple lines:


Nov 14 10:47:05 kalypso rsyslogd: [origin software="rsyslogd" 
swVersion="4.6.4" x-pid="1494" x-info="http://www.rsyslog.com";] rsyslogd 
was HUPed, type 'lightweight'.
Nov 15 10:47:45 kalypso rsyslogd: [origin software="rsyslogd" 
swVersion="4.6.4" x-pid="1494" x-info="http://www.rsyslog.com";] rsyslogd 
was HUPed, type 'lightweight'.
Nov 16 10:44:33 kalypso backup-manager[22992]: warning * Tar berichtete 
eine geänderte Datei beim Erstellen des Archivs.
Nov 16 10:47:39 kalypso rsyslogd: [origin software="rsyslogd" 
swVersion="4.6.4" x-pid="1494" x-info="http://www.rsyslog.com";] rsyslogd 
was HUPed, type 'lightweight'.
Nov 16 10:47:39 kalypso rsyslogd: [origin software="rsyslogd" 
swVersion="4.6.4" x-pid="1494" x-info="http://www.rsyslog.com";] rsyslogd 
was HUPed, type 'lightweight'.
Nov 17 04:46:04 kalypso cron-apt: CRON-APT RUN [/etc/cron-apt/config]: 
Wed Nov 17 04:00:01 CET 2010
Nov 17 04:46:04 kalypso cron-apt: CRON-APT SLEEP: 2722, Wed Nov 17 
04:45:23 CET 2010

Nov 17 04:46:04 kalypso cron-apt: CRON-APT ACTION: 3-download
Nov 17 04:46:04 kalypso cron-apt: CRON-APT LINE: /usr/bin/apt-get 
dist-upgrade -y -o APT::Get::Show-Upgraded=true

Nov 17 04:46:04 kalypso cron-apt: Reading package lists...
Nov 17 04:46:04 kalypso cron-apt: Building dependency tree...
Nov 17 04:46:04 kalypso cron-apt: Reading state information...
Nov 17 04:46:04 kalypso cron-apt: The following packages will be REMOVED:
Nov 17 04:46:04 kalypso cron-apt:   aptitude libept1
Nov 17 04:46:04 kalypso cron-apt: The following NEW packages will be 
installed:

Nov 17 04:46:04 kalypso cron-apt:   gs-common
Nov 17 04:46:04 kalypso cron-apt: The following packages will be DOWNGRADED:
Nov 17 04:46:04 kalypso cron-apt:   apt apt-utils ghostscript libc-bin 
libc-dev-bin libc6 libc6-dev libgs8

Nov 17 04:46:04 kalypso cron-apt:   linux-libc-dev locales
Nov 17 04:46:04 kalypso cron-apt: 0 upgraded, 1 newly installed, 10 
downgraded, 2 to remove and 2 not upgraded.

Nov 17 04:46:04 kalypso cron-apt: Need to get 18.2 MB of archives.
Nov 17 04:46:04 kalypso cron-apt: After this operation, 17.9 MB disk 
space will be freed.
Nov 17 04:46:04 kalypso cron-apt: E: There are problems and -y was used 
without --force-yes
Nov 17 10:44:35 kalypso backup-manager[13700]: warning * Tar berichtete 
eine geänderte Datei beim Erstellen des Archivs.
Nov 17 10:47:40 kalypso rsyslogd: [origin software="rsyslogd" 
swVersion="4.6.4" x-pid="1494" x-info="http://www.rsyslog.com";] rsyslogd 
was HUPed, type 'lightweight'.
Nov 18 10:51:43 kalypso rsyslogd: [origin software="rsyslogd" 
swVersion="4.6.4" x-pid="1494" x-info="http://www.rsyslog.com";] rsyslogd 
was HUPed, type 'lightweight'.
Nov 19 10:55:54 kalypso rsyslogd: [origin software="rsyslogd" 
swVersion="4.6.4" x-pid="1494" x-info="http://www.rsyslog.com";] rsyslogd 
was HUPed, type 'lightweight'.
Nov 20 10:52:03 kalypso rsyslogd: [origin software="rsyslogd" 
swVersion="4.6.4" x-pid="1494" x-info="http://www.rsyslog.com";] rsyslogd 
was HUPed, type 'lightweight'.
Nov 21 10:51:57 kalypso rsyslogd: [origin software="rsyslogd" 
swVersion="4.6.4" x-pid="1494" x-info="http://www.rsyslog.com";] rsyslogd 
was HUPed, type 'lightweight'.


another couple of lines (the first line is the last line of a reboot):
Nov  4 21:57:20 kalypso kernel: [   18.303749] tun0: Disabled Privacy 
Extensions
Nov  5 10:41:26 kalypso backup-manager[9167]: warning * Tar berichtete 
eine geänderte Datei beim Erstellen des Archivs.
Nov  5 10:44:23 kalypso rsyslogd: [origin software="rsyslogd" 
swVersion="4.6.4" x-pid="1469" x-info="http://www.rsyslog.com";] rsyslogd 
was HUPed, type 'lightweight'.




It is a headless Debian Squeeze server running on a lvm on top of a 
raid1. Two outgoing lines and some fancy routing to have a failover 
working together with some basic load balancing:

http://tech.gaeatimes.com/index.php/archive/how-to-load-balancing-failover-with-dual-multi-wan-adsl-cable-connections-on-linux/

Other than that it is only a standard SMB fileserver. The very same 
setup worked fine in Lenny.


Thx,

Malte



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#602541: pidgin: Logon to ICQ no possible

[bugreport]

On Fri, 05 Nov 2010 you wrote:
> Currenty its not possible to connect with ICQ network in soem
> situations. This has been fixed with 2.7.5 upstream release.
Same situation here. I can not connect to ICQ since end of October.
Yet this is persistent, not just in some situations.
I was using pidgin 2.7.3 from lenny bpo.
I verified that i get the same behaviour with pidgin 2.7.3 on squeeze.
I have not tried 2.7.5.

Some more details (logs from squeeze):

The usual error message is:
> Received unexpected response from 
> https://api.oscar.aol.com/aim/startOSCARSession: Ok

The debug window says:
> (21:20:46) certificate: Successfully verified certificate for 
> api.oscar.aol.com
> (21:20:46) util: request constructed
> (21:20:47) util: Response headers: 'HTTP/1.1 200 OK
> Date: Sat, 06 Nov 2010 20:20:47 GMT
> Server: Apache
> Content-Length: 642
> Pragma: no-cache
> Cache-Control: no-store,no-cache,must-revalidate
> Keep-Alive: timeout=1, max=87
> Connection: Keep-Alive
> Content-Type: text/xml
>
>'
> (21:20:47) util: parsed 642
> (21:20:47) oscar: startOSCARSession response was missing something:  version="1.0" encoding="UTF-8"?>
>  xmlns="http://developer.aim.com/xsd/aim.xsd";>200Ok1289074847205.188.3.84443...
> (21:20:47) connection: Connection error on 0xXXX (reason: 0 description: 
> Received unexpected response from 
> https://api.oscar.aol.com/aim/startOSCARSession: Ok)
> (21:20:47) account: Disconnecting account X (0xXXX)
> (21:20:47) connection: Disconnecting connection 0xXXX
> (21:20:47) oscar: Signed off.
> (21:20:47) connection: Destroying connection 0xXXX
(i have removed the cookie)




After unchecking "Use ClientLogin" in Account Preferences, the error message 
changes to:
> Unable to connect to BOS server: SSL Handshake Failed

with debug window:
> (21:40:47) proxy: Attempting connection to 205.188.3.86
> (21:40:47) proxy: Connecting to 205.188.3.86:5190 with no proxy
> (21:40:47) proxy: Connection in progress
> (21:40:47) proxy: Connecting to 205.188.3.86:5190.
> (21:40:47) proxy: Connected to 205.188.3.86:5190.
> (21:40:48) nss: Handshake failed  (-5961)
> (21:40:48) oscar: unable to connect to FLAP server of type 0x0002
> (21:40:48) connection: Connection error on 0xXXX (reason: 0 description: 
> Unable to connect to BOS server: SSL Handshake Failed)
> (21:40:48) account: Disconnecting account ...



I have not tried to connect without SSL.


The pidgin changelog at http://developer.pidgin.im/wiki/ChangeLog says:
version 2.7.5 (10/31/2010)
AIM and/or ICQ:
# New ICQ accounts default to proper ICQ servers. Old accounts using one of the 
old default servers will be silently migrated to use the proper servers.
# ICQ accounts using clientLogin now use the correct ICQ servers. This is 
separate from the server settings mentioned above.

But changing server from slogin.oscar.aol.com to slogin.icq.com
(as suggested by migrate_icq_server() from pidgin-2.7.5/libpurple/account.c)
does not help.



Regards




-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#524342: wrong package

[bugreport]

Hi,
I didn't use the installer this is the same system that I installed on the 
third of october (see original mail from that day in this report). No reinstall 
this time. I guess this update should go against grub-pc rather than the 
installer. But maybe it is interesting nonetheless, because grub-pc is also 
used in the installer.

bye,

Malte

 Original-Nachricht 
> Datum: Sat, 30 Oct 2010 14:20:41 +0100
> Von: Miguel Figueiredo 
> An: bugrep...@public-files.de, 524...@bugs.debian.org
> Betreff: Re: Bug#524342: Removing spare didn\'t help

> Hi,
> 
> what version of the installer did you use?
> 
> 
> A Sexta 29 Outubro 2010 19:59:58 bugrep...@public-files.de você escreveu:
> > Hi there,
> > 
> > I just removed the spare and that didn't change anything. Otherwise the
> > setup is exactly the same. I did an aptitude update && upgrade first. So
> > it is a Squeeze system. grub-install (after apt-get install grub-pc)
> > results in segfault at 10d3b48 ip 00 error 4 in grub-probe[...]
> > Segmentation fault
> > 
> > Thx,
> > 
> > Malte
> 
> -- 
> Melhores cumprimentos/Best regards,
> 
> Miguel Figueiredo
> http://www.DebianPT.org
> 



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#601823: Root on LVM on Raid1 won't boot custom kernel, stock kernel works fine

[bugreport]

Package: initramfs-tools
Version: 0.98.5
Severity: wishlist

Hi there,

this is most likely not a bug, but rather an error on my part, but I 
thought you might be interested in this. I installed a Squeeze system on 
an LVM sitting on a Linux softraid 1 array. I have a seperate boot 
partition that I finally put on a raid as well, but also tested the 
following when the boot partition was still on a "normal" partition on 
the first disk.
The stock kernel boots fine, but I wanted to build my own kernel. I 
build it using make-kpkg --uc --us --bzimage --initrd kernel_image. All 
necessary kernel options are set correctly (checked that four times) for 
both initramfs, dm and raid. But still the kernel doesn't boot into 
root. It drops right into busybox when it tries to access root. It even 
says it mounts the "other" raid (the one that boot is now sitting on).


Don't know if this is the right place, but in the past I have build a 
lot of kernels and installed lots of systems on softraid. Now on Squeeze 
it won't work in combination (softraid and my own kernel).


Maybe you will be able to reproduce this one easily. I use AMD64 
architecture btw.


I confirmed that initramfs is working, because it is loading a bunch of 
modules for the network and block devices.


Error message is:
mdadm: No devices listed in conf file were found.
Failure: failed to assemble all arrays

And it does load the raid1 modules right above that error message.

append="rootdelay=10" also didn't help.

Thx,

Malte



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#524342: Removing spare didn't help

[bugreport]

Hi there,

I just removed the spare and that didn't change anything. Otherwise the setup 
is exactly the same. I did an aptitude update && upgrade first. So it is a 
Squeeze system.
grub-install (after apt-get install grub-pc) results in segfault at 10d3b48 ip 
00 error 4 in grub-probe[...]
Segmentation fault

Thx,

Malte



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#524342: Problem might be related to raid metadata version

[bugreport]

grub-pc segfaults when raid is root. As mentioned before the boot partition is 
seperate of that raid in the first 500MB of the first disk (ext3). Lilo runs 
fine.

Output of mdadm -D /dev/md0

/dev/md0:
Version : 1.2
  Creation Time : Sun Oct  3 19:01:49 2010
 Raid Level : raid1
 Array Size : 1455076216 (1387.67 GiB 1490.00 GB)
  Used Dev Size : 1455076216 (1387.67 GiB 1490.00 GB)
   Raid Devices : 2
  Total Devices : 3
Persistence : Superblock is persistent

Update Time : Mon Oct  4 02:04:51 2010
  State : clean
 Active Devices : 2
Working Devices : 3
 Failed Devices : 0
  Spare Devices : 1

   Name : kalypso:0  (local to host kalypso)
   UUID : 6726fc4a:a16d65f3:7fb16d57:01f1757e
 Events : 46

Number   Major   Minor   RaidDevice State
   0   850  active sync   /dev/sda5
   1   8   211  active sync   /dev/sdb5

   2   8   37-  spare   /dev/sdc5


 Original-Nachricht 
> Datum: Sun, 3 Oct 2010 18:47:09 +0200
> Von: martin f krafft 
> An: bugrep...@public-files.de, 524...@bugs.debian.org
> CC: 598...@bugs.debian.org
> Betreff: Re: Bug#524342: Problem might be related to raid metadata version

> also sprach bugrep...@public-files.de 
> [2010.10.03.1638 +0200]:
> > from the installation system. After that I booted into the
> > installation and tried to install Grub again on the MBR, but even
> > though I had a simple boot partition that Lilo was able to boot
> > from I got a segfault from both Grub-legacy and Grub-PC trying to
> > install those.
> 
> Does the segfault go away if you let the array synchronise fully
> first?
> 
> -- 
>  .''`.   martin f. krafft   Related projects:
> : :'  :  proud Debian developer   http://debiansystem.info
> `. `'`   http://people.debian.org/~madduckhttp://vcs-pkg.org
>   `-  Debian - when you have better things to do than fixing systems




--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#524342: Problem might be related to raid metadata version

[bugreport]

I should have thought of that one myself (taking out the spare). But 
unfortunately I currently don't have access to that machine. I might be back as 
early as either this week or this weekend, but I am not sure. Sorry.

Background information: One of the softraid guys said that spinning down spare 
drives might work with metadata 1.2, but will not work for sure with metadata 
format 0.9. So the whole point of the ordeal to work with the new metadata 
version, that seems to be the cause of the grub headache was to get a hot spare 
that doesn't spin up.
Otherwise I could just add it as an active member.

Thx for your help, 
Malte

 Original-Nachricht 
> Datum: Sun, 3 Oct 2010 18:47:09 +0200
> Von: martin f krafft 
> An: bugrep...@public-files.de, 524...@bugs.debian.org
> CC: 598...@bugs.debian.org
> Betreff: Re: Bug#524342: Problem might be related to raid metadata version

> also sprach bugrep...@public-files.de 
> [2010.10.03.1638 +0200]:
> > from the installation system. After that I booted into the
> > installation and tried to install Grub again on the MBR, but even
> > though I had a simple boot partition that Lilo was able to boot
> > from I got a segfault from both Grub-legacy and Grub-PC trying to
> > install those.
> 
> Does the segfault go away if you let the array synchronise fully
> first?
> 
> -- 
>  .''`.   martin f. krafft   Related projects:
> : :'  :  proud Debian developer   http://debiansystem.info
> `. `'`   http://people.debian.org/~madduckhttp://vcs-pkg.org
>   `-  Debian - when you have better things to do than fixing systems




--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#524342: Problem might be related to raid metadata version

[bugreport]

Hi there,

I was able to boot into my system using a kernel off the System Rescue CD. But 
neither grub-legacy, grub-pc nor lilo was able to install on either the mbr or 
any partition.

At that time I only had two partitions on all three drives. One was 
softraid1/root and the other softraid1/swap. I believe that problem is related 
to the new metadata version in mdadm (1.2) as pointed out over here:

http://www.mail-archive.com/debian-...@lists.debian.org/msg13759.html

But in that bug report they are talking about older versions of Grub2 (prior 
1.98+20100720-1), but I even installed from sid ((1.98+20100804-5) and Grub 
only gave me segmentation faults.

Then I changed my disk layout during install. This time I created a boot 
partition on /dev/sda with ext3, no softraid, no mdadm and put root into a 
softraid (metdata 1.2, created by squeeze install) over all three drives. The 
softraid partitions start about 1GB into the drives. There is the boot 
partition up front. I was not able to install grub on the drive, but I was able 
to install Lilo from the installation system. After that I booted into the 
installation and tried to install Grub again on the MBR, but even though I had 
a simple boot partition that Lilo was able to boot from I got a segfault from 
both Grub-legacy and Grub-PC trying to install those. On any of the mbrs from 
the three disks as well as the boot partition.

Meanwhile Lenny installs fine with any setup. But Lenny creates softraid 
partitions with the 0.9 version metadata.

Cheers,

Malte



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#576274: I finally have a meaningful log to report

[bugreport]

Hi there,

I am currently running linux-image-2.6.32-5-686 and I checked /var/log/kern.log 
instead of /var/log/Xorg.0.log for clues after another "white screen" (I am 
pretty tired of testing suspend, because the white screen always happens when I 
am right in the middle of work), and here it is. Finally some meaningful log 
output to back up the bug report:

May 27 09:15:29 voltaire kernel: [16440.384972] render error detected, EIR: 
0x0010
May 27 09:15:29 voltaire kernel: [16440.384979] page table error
May 27 09:15:29 voltaire kernel: [16440.384981]   PGTBL_ER: 0x0010
May 27 09:15:29 voltaire kernel: [16440.384986] [drm:i915_handle_error] *ERROR* 
EIR stuck: 0x0010, masking
May 27 09:15:29 voltaire kernel: [16440.384997] render error detected, EIR: 
0x0010
May 27 09:15:29 voltaire kernel: [16440.385000] page table error
May 27 09:15:29 voltaire kernel: [16440.385002]   PGTBL_ER: 0x0010

For almost an hour nothing is in there before that time and nothing happens 
after that until I shut the machine down. 

Thx,

Malte

Problem remains the same, computer is fine after normal boot, but the screen 
goes white after pm-suspend, wake up, and then some time after that.

Here is some log output from the wakeup about an hour earlier:

May 27 08:23:03 voltaire kernel: [13290.179679] i915 :00:02.0: PCI INT A 
disabled
May 27 08:23:03 voltaire kernel: [13290.192162] i915 :00:02.0: power state 
changed by ACPI to D3
May 27 08:23:03 voltaire kernel: [13290.336063] ehci_hcd :00:1d.7: power 
state changed by ACPI to D3
May 27 08:23:03 voltaire kernel: [13290.360073] uhci_hcd :00:1d.1: power 
state changed by ACPI to D3
May 27 08:23:03 voltaire kernel: [13290.384073] uhci_hcd :00:1d.0: power 
state changed by ACPI to D3
May 27 08:23:03 voltaire kernel: [13290.424066] ACPI: Preparing to enter system 
sleep state S3
May 27 08:23:03 voltaire kernel: [13290.596383] Disabling non-boot CPUs ...
May 27 08:23:03 voltaire kernel: [13290.596500] Extended CMOS year: 2000
May 27 08:23:03 voltaire kernel: [13290.596500] Back to C!
May 27 08:23:03 voltaire kernel: [13290.596500] CPU0: Thermal monitoring 
enabled (TM2)
May 27 08:23:03 voltaire kernel: [13290.596500] Extended CMOS year: 2000
May 27 08:23:03 voltaire kernel: [13290.596500] Force enabled HPET at resume
May 27 08:23:03 voltaire kernel: [13290.596500] ACPI: Waking up from system 
sleep state S3
May 27 08:23:03 voltaire kernel: [13291.088143] agpgart-intel :00:00.0: 
restoring config space at offset 0x1 (was 0x900106, writing 0x20900106)
May 27 08:23:03 voltaire kernel: [13291.088167] i915 :00:02.0: restoring 
config space at offset 0x1 (was 0x93, writing 0x97)
May 27 08:23:03 voltaire kernel: [13291.088186] pci :00:02.1: restoring 
config space at offset 0x4 (was 0x0, writing 0x8020)
May 27 08:23:03 voltaire kernel: [13291.088219] pcieport :00:1c.0: 
restoring config space at offset 0x9 (was 0x1fff1, writing 0x80118001)
May 27 08:23:03 voltaire kernel: [13291.088227] pcieport :00:1c.0: 
restoring config space at offset 0x7 (was 0xf0, writing 0x7070)
May 27 08:23:03 voltaire kernel: [13291.088241] pcieport :00:1c.0: 
restoring config space at offset 0x1 (was 0x100107, writing 0x100507)

and then another couple of lines concerning the i915:

May 27 08:23:03 voltaire kernel: [13291.255521] i915 :00:02.0: power state 
changed by ACPI to D0
May 27 08:23:03 voltaire kernel: [13291.255573] i915 :00:02.0: power state 
changed by ACPI to D0
May 27 08:23:03 voltaire kernel: [13291.255583] i915 :00:02.0: PCI INT A -> 
GSI 16 (level, low) -> IRQ 16
May 27 08:23:03 voltaire kernel: [13291.255589] i915 :00:02.0: setting 
latency timer to 64



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#575193: tmux dont refresh console

[debian-bugreport]

I have the same issue on an Debian 5.0 vserver installation, Im using tmux only
over an SSH connection.

The screen wont be refreshed, eg if I type something I dont see the
result, till switch the tab and then switch back...
The bug only appears from time to time, also when I dont restart tmux
the buggy behaviour dissappears for some time...


Thought first its because I had used the libc6 stable version instead of
the testing ver, but upgrading to libc6 testing dont solve the problem..
Dont know the steps to reproduce it, maybe SSH connection losses have
something todo with..


ii  libc62.10.2-6 Embedded GNU C 
Library: Shared libraries
ii  tmux 1.2-4terminal 
multiplexer
i  libncurses5  5.7+20100313-2   shared libraries 
for terminal handling
i  libevent-1.4-2   1.4.13-stable-1  An asynchronous 
event notification library
ii  libevent11.3e-3   An asynchronous 
event notification library


best regards

Fabian


pgphqT4twaSES.pgp
Description: PGP signature

Bug#576274: bug still present in current kernel from Sid

[bugreport]

Hi,

I tested the current linux-image-2.6.32-4-686 in Sid and the problem is indeed 
still there. Current workaround: Don't use suspend.

I use the laptop while testing and I always lose a little of the stuff I work 
on when the screen goes dark (the stuff not saved yet). So I really recommend 
the workaround for now.

Cheers,

Malte
-- 
"Feel free" - 10 GB Mailbox, 100 FreeSMS/Monat ...
Jetzt GMX TopMail testen: http://www.gmx.net/de/go/topmail



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#576274: This time crash with log output

[bugreport]

I finally got a crash with a log output. The strange thing is that this time it 
was an X sever crash instead of "just" the blank screen.

I had about three to four "pm-suspend" (without --auto-quirks). This time the 
keyboard also did not work any more and the screen went black with hyphen bar 
in the upper right corner. Font size looked like the one when not running X.
-- 
"Feel free" - 10 GB Mailbox, 100 FreeSMS/Monat ...
Jetzt GMX TopMail testen: http://www.gmx.net/de/go/topmail


Xorg.0.log
Description: Binary data

Bug#576274: additional info

[bugreport]

I will continue to test new kernels as they come. This has been a long standing 
issue. In early 2.6.32 kernels I had an error message right after Grub. This 
went away with later versions. At the same time my own compiled kernels (from 
recent linux-source-2.6.32) had a blank screen right after Grub (instead of the 
error message I got with the precompiled kernels), but otherwise booted fine. I 
just couldn't get them to display anything. 
I think they put a lot of work into the Intel graphics driver in the kernel 
recently. That is why the error message dissapeared. 

I think the screen blanking only comes after a pm-suspend. Usually when 
browsing the web. I tried both pm-suspend with and without --auto-quirks. 

I don't think it has anything to do with Xorg.conf, since I both tried with and 
without one. 

So it comes back down to the basic kernel. And I don't think I configured 
anything there at all, which leads me to think that it might be a real bug 
after all.

I did check for a bit if other people did report this already, but didn't find 
anything matching my problem very good. Could you keep the bug open for recent 
kernels please? Maybe someone else will come forward with the same problem.

I will see about 2.6.33 from experimental. My internet connection is currently 
a little slow, so I might only do this in a week or two.

Thank you so far for bearing with me.

Malte

 Original-Nachricht 
> Datum: Tue, 6 Apr 2010 04:36:52 +0200
> Von: maximilian attems 
> An: bugrep...@public-files.de
> CC: 576...@bugs.debian.org
> Betreff: Re: Bug#576274: additional info

> On Mon, 05 Apr 2010, bugrep...@public-files.de wrote:
> 
> > I don't have hotkey-setup installed 
> 
> good.
>  
> > output of lscpi -vvv attached
> > 
> > Thanks for caring so much. I am still not entirely convinced that this
> > is a genuine bug (which is why I waited so long reporting it), because
> > the graphics chip in use (and the rest of the hardware) is so
> > widespread, that I can't be the only Debian user experiencing this.
> > 
> > Malte
> 
> hmmm,
> could you check against 2.6.32-11 should land next days in unstable?
> 
> also there is 2.6.33 in experimental, don't think it should make
> a difference but better check.
> 
> thanks

-- 
"Feel free" - 10 GB Mailbox, 100 FreeSMS/Monat ...
Jetzt GMX TopMail testen: http://www.gmx.net/de/go/topmail



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#576274: additional info

[bugreport]

> > Sry, missed that part.
> 
> do you have hotkey-setup installed?
> 
> dpkg -l hotkey-setup
> 
> and following output please
> 
> lspci -vvv
>  
> 
> thanks

I don't have hotkey-setup installed 

output of lscpi -vvv attached

Thanks for caring so much. I am still not entirely convinced that this is a 
genuine bug (which is why I waited so long reporting it), because the graphics 
chip in use (and the rest of the hardware) is so widespread, that I can't be 
the only Debian user experiencing this.

Malte
-- 
Sicherer, schneller und einfacher. Die aktuellen Internet-Browser -
jetzt kostenlos herunterladen! http://portal.gmx.net/de/go/atbrowser
00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express 
Processor to DRAM Controller (rev 03)
Subsystem: IBM ThinkPad Z60t
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 
Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller: Intel Corporation Mobile 915GM/GMS/910GML 
Express Graphics Controller (rev 03) (prog-if 00 [VGA controller])
Subsystem: IBM Device 0582
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR-  [disabled]
Capabilities: 
Kernel driver in use: i915

00:02.1 Display controller: Intel Corporation Mobile 915GM/GMS/910GML Express 
Graphics Controller (rev 03)
Subsystem: IBM Device 0582
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- 

00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI 
Express Port 1 (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 
Kernel driver in use: pcieport

00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) 
USB UHCI #1 (rev 03) (prog-if 00 [UHCI])
Subsystem: IBM Device 0565
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
SERR- TAbort- 
SERR- TAbort- 
SERR- TAbort- 
SERR- TAbort- 
SERR- 
Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3) (prog-if 
01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- 
Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: 

00:1e.2 Multimedia audio controller: Intel Corporation 82801FB/FBM/FR/FW/FRW 
(ICH6 Family) AC'97 Audio Controller (rev 03)
Subsystem: IBM Device 0581
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
SERR- 
Kernel driver in use: Intel ICH

00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 
Modem Controller (rev 03) (prog-if 00 [Generic])
Subsystem: IBM Device 0576
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
SERR- 
Kernel driver in use: Intel ICH Modem

00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge 
(rev 03)
Subsystem: IBM Device 0568
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
SERR- TAbort- 
SERR- 
Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus 
Controller (rev 03)
Subsystem: IBM Device 056b
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
SERR- TAbort- SERR- 
Kernel driver in use: tg3

04:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 8d)
Subsystem: IBM Device 0555
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
SERR- Reset- 16bInt+ PostWrite+
16-bit leg

Bug#576274: additional info

[bugreport]

Hi there,

with some help from one of the maintainers I found the latest package from sid 
and installed it:
http://packages.debian.org/sid/linux-image-2.6.32-4-686

But the problem remains unchanged. And I still don't have any meaningful log 
reports. I wanted to add that in former kenel versions (pre 2.6.31) the problem 
was less frequent, but more severe (e.g. crash also took down x input) . So it 
might be a different problem.

Also when the screen goes blank it sometimes takes on different shades of grey. 
From almost white to grey to black. Backlight is on. And when rebooted the 
screen stays that way until the screen powers all the way down.

With the new kernel version I had an uptime of about 3 hours and only two 
pm-suspends until the problem occured.

Thanks,

Malte
-- 
GMX.at - Österreichs FreeMail-Dienst mit über 2 Mio Mitgliedern
E-Mail, SMS & mehr! Kostenlos: http://portal.gmx.net/de/go/atfreemail



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#576274: infrequent, but persistent blank screens with Intel GMA900

[bugreport]

Package: linux-image-2.6.32-3-686
Version: 2.6.32-9

This bug also applies to linux-source and linux-image packages going back to at 
least 2.6.30

I have not reported this, because I have no useful log file entries. And I 
thought because the chipset is so common that someone else will report it more 
properly (with more information).

I have tried different linux-source packages as well as linux-image packages.

The problem usually occurs after some time and one or two software suspends 
(pm-suspend  --auto-quirks). Shortly before it the screen will usually jump 
horizontally. The jumping will not stop if not changing virtual screens in X. 
Then, after some time it will get really bad. Then the screen suddenly blanks 
(backlight will stay on). It only effects the screen. Everything else will 
still work, confirmed by remote login via ssh.

Hardware:
http://www.thinkwiki.org/wiki/Category:X41
http://www.thinkwiki.org/wiki/Intel_915GM

Thanks,

Malte
-- 
GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#565434: upgrading to Squeeze from Lenny problems

[bugreport]

Hi, 

here is some further information. I used this image to make a clean install:
http://cdimage.debian.org/debian-cd/5.0.3/amd64/iso-cd/debian-503-amd64-businesscard.iso

It is an AMD 785G chipset based system with 4 GB of ram and an AMD Phenom II 
processor.

To reduce the possible sources of the error I reduced the amount of packages 
installed. I did this on the second try and it did not change the outcome. I 
attached the outcome of dpkg -l

Then I reduced the apt source to only one line pointing to the Squeeze main apt 
source:
deb http://ftp2.de.debian.org/debian/ squeeze main

Then I used the instructions:
http://www.go2linux.org/how-to-upgrade-from-debian-lenny-to-squeeze

aptitude update
aptitude install apt dpkg aptitude
aptitude full-upgrade

I also used apt-get update apt-get dist-upgrade another time, but those 
produced essentially the same results. The system downloads all requested 
packages (upon the first install 7 packages were already upgraded, but not 
libc6). First Grub and Dash are requesting some information. 

Then I get a whole bunch of error messages (translating from German):

- first package to be installed is "locales". 
- libc6 is damaged because of the installation of libc-bin
- unpack libc-bin
- de-configure libc6
- replaceing libc6
- setting up libc-bin
...
installing of config files and preparing to replace libc6 old with new
- checking for servies
- checking init scripts
- dpkg: error while loading shared libraries: libc.so.6: cannot open shared 
object
- /usr/bin/dpkg: error while loading shared libraries: libc.so.6: cannot open 
shared object file: No such file or directory
- E: Sub-process /usr/bin/dpkg returned an error code (127)
- A package could not be installed. Trying to delete:
- Setting up libc6 (2.10.2-2)
- grep: error while loading shared libraries: libc.so.6: cannot open shared 
object file: No such file or directory
- Version string '%.9f' contains invalid data; ignoring: '%.9f' at 
/usr/share/perl/5.10/vars.pm line 3.
- Incorrect use of pragma 'warnings' at 
/usr/share/perl/5.10/warnings/register.pm line 5.
- Compilations failed in require at /usr/share/perl/5.10/warnings/register.pm 
line 5.

then a bunch of compilation errors

then locales complains, that no proper glibc is installed

and it breaks off

further trys with apt-get -f install and aptitude safe-upgrade yield 
essentially the same results.

thx,

Malte



 Original-Nachricht 
> Datum: Fri, 15 Jan 2010 23:05:47 +0100
> Von: Aurelien Jarno 
> An: bugrep...@public-files.de, 565...@bugs.debian.org
> CC: sub...@bugs.debian.org
> Betreff: Re: Bug#565434: upgrading to Squeeze from Lenny problems

> On Fri, Jan 15, 2010 at 07:17:07PM +0100, bugrep...@public-files.de wrote:
> > Package: libc6
> > Version: 2.10.2-2
> > 
> > Hi, 
> > 
> > I don't know where to put this. I wanted to get a Squeeze system. I
> installed Lenny on my machine and upgraded it to current Lenny (no packages
> selected in tasksel, minimal Debian system installed). Then I tried upgrading
> and it broke the system every time to the point that I had to reeinstall
> Lenny. I tried upgrading with apt-get dist-upgrade and aptitutde install apt
> dpkg aptitude and then aptitude safe-upgrade. 
> > Every time I had many libc6 errors and even dpkg stoped working
> properly. I suppose upgrading from Lenny to Squeeze is currently very 
> dangerous.
> > 
> 
> Without more informations, we are not able to handle this bug report.
> How does your system break? Do you have an output of the error?
> 
> -- 
> Aurelien JarnoGPG: 1024D/F1BCDB73
> aurel...@aurel32.net http://www.aurel32.net

-- 
GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01


packagelist
Description: Binary data

Bug#565434: upgrading to Squeeze from Lenny problems

[bugreport]

Package: libc6
Version: 2.10.2-2

Hi, 

I don't know where to put this. I wanted to get a Squeeze system. I installed 
Lenny on my machine and upgraded it to current Lenny (no packages selected in 
tasksel, minimal Debian system installed). Then I tried upgrading and it broke 
the system every time to the point that I had to reeinstall Lenny. I tried 
upgrading with apt-get dist-upgrade and aptitutde install apt dpkg aptitude and 
then aptitude safe-upgrade. 
Every time I had many libc6 errors and even dpkg stoped working properly. I 
suppose upgrading from Lenny to Squeeze is currently very dangerous.

Thx,

Malte
-- 
GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#563163: CanoScan Lide 50 doesn't work in Squeeze, works in Lenny

[bugreport]

Package: libsane
Version: 1.0.20-11

Hi there,

I have a CanoScan Lide 50 USB 2.0 scanner. It is detected fine both in stable 
and testing distributions of Debian. But when I press "scan" in Squeeze Xsane 
stalls for about 10 sec and then says there is an I/O error.

I deleted .sane in my home directory. Nothing changes.

Thx,

Malte


-- 
GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#556274: keep bug visible

[bugreport]

Hi there,

thx for the upgrade to 3.5, I use Squeeze and have been waiting for it for some 
time. I also frequently use different profiles and just went to file a bug 
report. I checked if it was already open and here I found it.

If you archive it too soon people might file it again.

Thx,

Malte
-- 
GRATIS für alle GMX-Mitglieder: Die maxdome Movie-FLAT!
Jetzt freischalten unter http://portal.gmx.net/de/go/maxdome01



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#559113: Workaround for this bug

[bugreport]

Hi there,

The file "preferences" should be part of icewm-common IMHO, but is not listed 
as part of that package. Maybe the bug (if it is a bug) should be listed under 
that package.

Since it took me a lot of time to find a preferences file I thought I should 
show how I got it for anyone that has the same problem and comes across this 
page.


Finding the file "preferences" on the web proved to be a real challenge. I gave 
up on that one pretty quickly.
It looks like it is not part of the Debian package for Lenny or Etch eiter. I 
didn't find them listed on the respected web pages:
http://packages.debian.org/lenny/i386/icewm-common/filelist
http://packages.debian.org/squeeze/i386/icewm-common/filelist
http://packages.debian.org/etch/i386/icewm-common/filelist
http://packages.debian.org/lenny/i386/icewm/filelist
http://packages.debian.org/squeeze/i386/icewm/filelist
http://packages.debian.org/etch/i386/icewm/filelist

Downloading the source from upstream and compiling didn't work for me, because 
it wanted some x11 dev packages I did not have installed.

Downloading the latest fedora-rpm-packages also didn't work for me either, 
because rpm2cpio failed to unpack it. I read that there are problems with 
rpm2cpio and recent rpm packages. So I downloaded an older one:
ftp://194.199.20.114/linux/fedora/updates/10/i386/icewm-1.2.37-5.fc10.i386.rpm

Unpacking:

rpm2cpio icewm-1.2.37-5.fc10.i386.rpm | cpio -idm

And there it is:
./usr/share/icewm/preferences

I also attached the file.

Cheers,

Malte


preferences
Description: Binary data

Bug#559113: no preferences file created

[bugreport]

Package: icewm
Version: 1.2.37+1.3.4pre2-8

Hi,

I just installed Debian Squeeze using the current installer. Then I used 
dselect to install icewm and X. I also did "apt-get install icewm-themes" and 
"dpkg -P icewm-themes" after that. Maybe that has something to do with the 
following.

The files in /etc/X11/icewm are: 
menu  programs  toolbar

The file in ~/.icewm is: 
theme

I expected a file called preferences with default options in either or both of 
these directories. 

I don't even know if this is a bug. Icewm works fine and I will now create a 
default preferences file from the web. I like the default features and only 
started looking for the file, because I wanted to see the battery status on the 
taskbar.

Thx,

Malte



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#554719: debtree: fails to choose latest package(s) (bugreport: message 1 of 10)

[bugreport . wentzel]

On Sat, Nov 7, 2009 at 1:06 AM, Frans Pop - elen...@planet.nl
<+bugreport+wentzel+24599ab956.elendil#planet...@spamgourmet.com> wrote:

> Did you have the package installed when you ran debtree?
> If it was installed, was that at the new or an older version?
>

I didn't have the package installed, this case wouldn't have been covered by
the patch anyway.

>
> Thanks for the patch.
>

And thanks for your swift reaction. About the patch: Perl really isn't my
language of choice, so I must admit that I quickly used up all my patience,
when I looked in AptPkg::Cache to determine what could be causing the
problem I experienced.
So "naturally" I didn't find it there - I did however notice that the output
from apt-cache seemed to be sorted in a descending order. So changing 'pop'
to 'shift' was basically an educated guess. But maybe it should be
considered doing a sort in debtree on the VersionList array, instead of
blindly assuming the sort order returned from AptPkg? - especially since
there doesn't seem to be any documents stating what the sort order is
supposed to be.

Regards,
Thomas

Bug#529220: warning: data loss through using synce in lenny

[bugreport]

Package: synce-sync-engine
Version: 0.11.1-2
Severity: important


Hello,

I used opensync and synce to sync the contacts between Kontact and my Windows 
Mobile 6.1 phone. On the first sync my phone had no contacts. So all contacts 
were, in fact, synced to a clean phone. I noticed that only one telephone 
number per contact was synced and the rest was ignored. 

The data loss on the Kontact side of the sync occures when changing a contact 
on the phone that has multiple phone numbers in Kontact. The changed contact 
replaces all data in Kontact using the data from the phone lacking the 
additional phone numbers. 

This comes without any warning and might degrade an addressbook slowly over 
time. In this case it is hard to work with backups, because they do not contain 
new data that constantly gets added to an address book.

Therefore I strongly advise against using this package. I guess it should come 
with a big warning sticker: "Currently this package sneaks in and deletes some 
phone numbers without notice."

Bye,

Malte



-- 
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#520739: Confirmation

[bugreport]

I can confirm this behaviour. Even downgrading does not help.

Regards,
Harald



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#520161: Reproducible way to crash

[bugreport]

Hi, it's me again.

I found a reproducible way to crash ooimpress connected to the 
fullscreen mode.


* start presentation
* press F9 for fullscreen
* leave fullscreen (ESC)
* View > Handout
* View > Start Presentation

The backtrace is:
*
(gdb) run
The program being debugged has been stEOF [assumed Y]
Starting program: /usr/lib/openoffice/program/soffice.bin
[Thread debugging using libthread_db enabled]
warning: Lowest section in /usr/lib/libicudata.so.40 is .hash at 
00b4

[New Thread 0xb4bbe940 (LWP 6428)]

** (soffice:6428): WARNING **: unable to get gail version number
[New Thread 0xaed14b90 (LWP 6429)]
[New Thread 0xae513b90 (LWP 6430)]
[New Thread 0xadc2ab90 (LWP 6431)]
[New Thread 0xabc35b90 (LWP 6432)]
[New Thread 0xaaeb6b90 (LWP 6435)]
[Thread 0xaaeb6b90 (LWP 6435) exited]
[New Thread 0xaaeb6b90 (LWP 6440)]
[New Thread 0xa9d5eb90 (LWP 6441)]
[Thread 0xa9d5eb90 (LWP 6441) exited]
[Thread 0xaaeb6b90 (LWP 6440) exited]

(soffice:6428): Gtk-WARNING **: GtkSpinButton: setting an adjustment 
with non-zero page size is deprecated

[New Thread 0xaaeb6b90 (LWP 6445)]
[Thread 0xaaeb6b90 (LWP 6445) exited]

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0xb4bbe940 (LWP 6428)]
0xaa13b907 in sd::ViewShell::GetFrameView () from 
/usr/lib/openoffice/program/../basis-link/program/libsdli.so

(gdb) bt
#0  0xaa13b907 in sd::ViewShell::GetFrameView () from 
/usr/lib/openoffice/program/../basis-link/program/libsdli.so
#1  0xaa47c21e in sd::SlideShow::startWithArguments () from 
/usr/lib/openoffice/program/../basis-link/program/libsdli.so
#2  0xaa479b04 in sd::SlideShow::start () from 
/usr/lib/openoffice/program/../basis-link/program/libsdli.so
#3  0xaa16f9b6 in sd::DrawViewShell::FuSupport () from 
/usr/lib/openoffice/program/../basis-link/program/libsdli.so
#4  0xaa1789d4 in SfxStubDrawViewShellFuSupport () from 
/usr/lib/openoffice/program/../basis-link/program/libsdli.so
#5  0xb770940b in SfxDispatcher::Call_Impl () from 
/usr/lib/openoffice/program/../basis-link/program/libsfxli.so
#6  0xb7709b1e in SfxDispatcher::PostMsgHandler () from 
/usr/lib/openoffice/program/../basis-link/program/libsfxli.so
#7  0xb7737b89 in SfxHintPoster::Event () from 
/usr/lib/openoffice/program/../basis-link/program/libsfxli.so
#8  0xb7737b29 in SfxHintPoster::LinkStubDoEvent_Impl () from 
/usr/lib/openoffice/program/../basis-link/program/libsfxli.so
#9  0xb6aab9f9 in ImplWindowFrameProc () from 
/usr/lib/openoffice/program/../basis-link/program/libvclli.so
#10 0xb44792e7 in SalDisplay::DispatchInternalEvent () from 
/usr/lib/openoffice/basis3.0/program/libvclplug_genli.so
#11 0xb489183a in GtkXLib::userEventFn () from 
/usr/lib/openoffice/basis3.0/program/libvclplug_gtkli.so

#12 0xb4e10431 in ?? () from /usr/lib/libglib-2.0.so.0
#13 0x09c914b0 in ?? ()
#14 0x0a63c9b0 in ?? ()
#15 0xbffc7798 in ?? ()
#16 0xb7bf4136 in pthread_mutex_unlock () from 
/lib/i686/cmov/libc.so.6
#17 0xb4e12368 in g_main_context_dispatch () from 
/usr/lib/libglib-2.0.so.0

#18 0xb4e15a03 in ?? () from /usr/lib/libglib-2.0.so.0
#19 0x09cb15b8 in ?? ()
#20 0xff9c in ?? ()
#21 0x0b890450 in ?? ()
#22 0x in ?? ()
(gdb)

*

Cheers,
Harald




--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#520161: Debugger Output for crash

[bugreport]

Hi,

I could produce the crash und grab the debugger output. I produced it 
by:


* open the presentation
* go to fullscreen
* leave fullscreen
* click some views in "view" menu
* pick menu "start presentation" in view menu

here is the debug output:
***
gdb /usr/lib/openoffice/program/soffice.bin
GNU gdb 6.8-debian
Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later 


This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show 
copying"

and "show warranty" for details.
This GDB was configured as "i486-linux-gnu"...
(gdb) run
Starting program: /usr/lib/openoffice/program/soffice.bin
[Thread debugging using libthread_db enabled]
warning: Lowest section in /usr/lib/libicudata.so.40 is .hash at 
00b4

[New Thread 0xb4b12940 (LWP 4842)]

** (soffice:4842): WARNING **: unable to get gail version number
[New Thread 0xaec68b90 (LWP 4848)]
[New Thread 0xae467b90 (LWP 4849)]
[New Thread 0xadb7eb90 (LWP 4850)]
[New Thread 0xabb89b90 (LWP 4854)]
[New Thread 0xaae0ab90 (LWP 4857)]
[Thread 0xaae0ab90 (LWP 4857) exited]
[New Thread 0xaae0ab90 (LWP 4859)]
[New Thread 0xa9cb2b90 (LWP 4860)]
[Thread 0xa9cb2b90 (LWP 4860) exited]
[Thread 0xaae0ab90 (LWP 4859) exited]

(soffice:4842): Gtk-WARNING **: GtkSpinButton: setting an adjustment 
with non-zero page size is deprecated

[New Thread 0xaae0ab90 (LWP 4864)]
[Thread 0xaae0ab90 (LWP 4864) exited]

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0xb4b12940 (LWP 4842)]
0xaa08f907 in sd::ViewShell::GetFrameView ()
   from /usr/lib/openoffice/program/../basis-link/program/libsdli.so
Current language:  auto; currently c++
(gdb) bt
#0  0xaa08f907 in sd::ViewShell::GetFrameView ()
   from /usr/lib/openoffice/program/../basis-link/program/libsdli.so
#1  0xaa3d021e in sd::SlideShow::startWithArguments ()
   from /usr/lib/openoffice/program/../basis-link/program/libsdli.so
#2  0xaa3cdb04 in sd::SlideShow::start ()
   from /usr/lib/openoffice/program/../basis-link/program/libsdli.so
#3  0xaa0c39b6 in sd::DrawViewShell::FuSupport ()
   from /usr/lib/openoffice/program/../basis-link/program/libsdli.so
#4  0xaa0cc9d4 in SfxStubDrawViewShellFuSupport ()
   from /usr/lib/openoffice/program/../basis-link/program/libsdli.so
#5  0xb765d40b in SfxDispatcher::Call_Impl ()
   from /usr/lib/openoffice/program/../basis-link/program/libsfxli.so
#6  0xb765db1e in SfxDispatcher::PostMsgHandler ()
   from /usr/lib/openoffice/program/../basis-link/program/libsfxli.so
#7  0xb768bb89 in SfxHintPoster::Event ()
   from /usr/lib/openoffice/program/../basis-link/program/libsfxli.so
#8  0xb768bb29 in SfxHintPoster::LinkStubDoEvent_Impl ()
   from /usr/lib/openoffice/program/../basis-link/program/libsfxli.so
#9  0xb69ff9f9 in ImplWindowFrameProc ()
   from /usr/lib/openoffice/program/../basis-link/program/libvclli.so
#10 0xb43cd2e7 in SalDisplay::DispatchInternalEvent ()
   from /usr/lib/openoffice/basis3.0/program/libvclplug_genli.so
#11 0xb47e583a in GtkXLib::userEventFn ()
---Type  to continue, or q  to quit---
   from /usr/lib/openoffice/basis3.0/program/libvclplug_gtkli.so
#12 0xb4d64431 in ?? () from /usr/lib/libglib-2.0.so.0
#13 0x08ca44b0 in ?? ()
#14 0x093131e0 in ?? ()
#15 0xbff1d6f8 in ?? ()
#16 0xb7b48136 in pthread_mutex_unlock () from 
/lib/i686/cmov/libc.so.6
#17 0xb4d66368 in g_main_context_dispatch () from 
/usr/lib/libglib-2.0.so.0

#18 0xb4d69a03 in ?? () from /usr/lib/libglib-2.0.so.0
#19 0x08cc45b8 in ?? ()
#20 0xff9c in ?? ()
#21 0x0a90a5a0 in ?? ()
#22 0x in ?? ()
(gdb) q
The program is running.  Exit anyway? (y or n) y

***

Thanks,
Harald



--
To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org
with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org

Bug#484130: kitchensync broken with synce

[bugreport]

Hi,

this might be the same bug. But it is not yet described. When I try to form a 
group with the Synce-Plugin in Kitchensync I get an error message:

Unable to open file /usr/share/opensync/defaults/synce-opensync-plugin for 
reading:

I have current versions of those packages installed: libsynce0 
opensync-plugin-synce synce-hal synce-sync-engine

thx,

Malte



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#504814: network manager blanks input fields

[bugreport]

Package: network-manager-kde
Version: 1:0.2.2-1
Severity: normal

When setting up a wpa wireless connection using the Network-manager-kde and 
failing to connect the dialogue comes back up with default values. All changes 
are overwritten including passwort and user name.

This also happens sometimes when the network looses connection. You are then 
presented with the dialogue to set up username and password with blank fields. 
Also changes in other options are reversed to the default values.

Username and password are deleted from kde wallet as well.

Regards,

Malte



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#504468: dns2tcp: Changelog differs from Upstream changelog (missing lines)

[debian-bugreport]

Package: dns2tcp
Version: 0.4.dfsg-4
Severity: minor

Hi,

the upstream changelog is much longer than the "pseudo upstrem
changelog" shipped with the package, all changes from 0.4.1 to 0.4.3 are
missing in the shipped changelog:

| Version 0.4.3
|   Fix unsigned int pb and error in dns_decode (John Lampe)
|   Fix drop privileges problems (Solar Designer)
|   Add limit to prevent fork() (Idea from Solar Designer)
| 
| Version 0.4.2
|   Suppressed
|   
| Version 0.4.1 
|   Fix buffer overflow in dns_decode
|   Fix bind Problem (thanks Taylor R Campbell)
|   Fix compilation problem in FreeBSD

Greets
M. Augsburger

-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: amd64 (x86_64)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.22.19-vs2.3.0.34-kuschelhoelle
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)

Versions of packages dns2tcp depends on:
ii  libc6  2.3.6.ds1-13etch7 GNU C Library: Shared libraries

dns2tcp recommends no packages.

-- no debconf information



-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#496741: iceweasel crash when i pause any youtube video

[bugreport]

package: iceweasel

Replaces: firefox (<< 2.0+dfsg-1), iceweasel-gnome-support (<=
3.0~b5-2), mozilla-firefox

Version: 3.0.1-1


System: Linux 2.6.25-2-686 #1 SMP Fri Jul 18 17:46:56 UTC 2008 i686
X Vendor: The X.Org Foundation
X Vendor Release: 10402000
Selinux: No
Accessibility: Disabled
GTK+ Theme: Clearlooks
Icon Theme: gnome

Memory status: size: 215748608 vsize: 215748608 resident: 112033792 share: 
27185152 rss: 112033792 rss_rlim: 4294967295
CPU usage: start_time: 1219593960 rtime: 19933 utime: 18187 stime: 1746 
cutime:2 cstime: 5 timeout: 0 it_real_value: 0 frequency: 100

Backtrace was generated from '/usr/lib/bug-buddy/firefox-bin'

(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
[Thread debugging using libthread_db enabled]
[New Thread 0xb7c1a6c0 (LWP 13038)]
[New Thread 0xb33feb90 (LWP 24132)]
[New Thread 0xb0affb90 (LWP 13060)]
[New Thread 0xb29ffb90 (LWP 13057)]
[New Thread 0xb3bffb90 (LWP 13056)]
[New Thread 0xb45ffb90 (LWP 13041)]
[New Thread 0xb50ffb90 (LWP 13040)]
[New Thread 0xb5affb90 (LWP 13039)]
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debu

Bug#403425: Offending change found

[bugreport . 20 . iridos]

Hi,

I found the cause for this bug.
The bug was ideed introduced when going from version 21.4.19-1 to 21.4.19-2 and 
as such does not come from any change in upstream.


Looking at the changes between 19-1 and 19-2, nothing major was changed.

I was finally able to narrow things down and find that the different behavior 
is caused by this change made in debian/rules (see attachment):

-machine_type = $(shell dpkg --print-architecture)
+machine_type = $(shell dpkg-architecture -qDEB_HOST_GNU_CPU)

(and also
-debianconfig = ${machine_type}-debian-linux
+debianconfig = $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
)

"dpkg --print-architecture prints" "i386" on my machine, while 
"dpkg-architecture -qDEB_HOST_GNU_CPU" prints "i486"; the 2nd part changes 
debianconfig from "i385-debian-linux" to "i486-linux-gnu"


This then must cause some difference in the compile or in the paths used by the 
final xemacs program and then ultimatively leads to the failure of flyspell.


FIX: Reverse apply the attached patch to make the package and flyspell works as 
before.


It would be interesting to know why this innocent change causes the bug, but 
for now I would suggest to just revert to the old values for machine_type and 
debianconfig.


Now is perhaps yet in time to close the bug and get it fixed in lenny?

Cheers,
Karsten

PS. this is the 2nd attempt to send this, sorry if it is a duplicate.diff -ru xemacs-21.4.19-1/debian/rules xemacs-21.4.19-2/debian/rules
--- xemacs-21.4.19-1/debian/rules   2008-08-12 13:26:23.0 -0500
+++ xemacs-21.4.19-2/debian/rules   2008-08-12 13:27:04.0 -0500
@@ -22,10 +22,10 @@
 # any way to do this automatically since we'd like this to be
 # easily used with no changes on other architectures, but still
 # want to be able to specify.  Does this work OK?
-machine_type = $(shell dpkg --print-architecture)
+machine_type = $(shell dpkg-architecture -qDEB_HOST_GNU_CPU)
 prefix=usr

-debianconfig = ${machine_type}-debian-linux
+debianconfig = $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE)
 tmp_file_loc = debian/tmp

 var_file = var_file.pl

Bug#465174: closed by Eduard Bloch <[EMAIL PROTECTED]> (bugreport: message 2 of 20) module-assistant doesn't compile nvidia for kernel 2.6.24)

[bugreport . 20 . gpburth]

Debian Bug Tracking System - [EMAIL PROTECTED] wrote:

Subject:
Re: Bug#465174: module-assistant doesn't compile nvidia for kernel 2.6.24
From:
Eduard Bloch <[EMAIL PROTECTED]>
Date:
Sat, 16 Feb 2008 02:18:06 +0100
To:
[EMAIL PROTECTED], [EMAIL PROTECTED]

To:
[EMAIL PROTECTED], [EMAIL PROTECTED]


#include 

I have package version 1.0.8776-4 installed, which is the newest package  
available in aptitude (and also the newest packages.debian.org lists for  
stable)

169.09-1 is only available for sid (and I'd like to stay stable :))


Are you kidding me? "Stay stable" while trying to compile with bleeding
edge kernel?

Closing the bug with no action. Use Etch kernel for Etch nvidia drivers,
or go unstable.

Eduard.


Unfortunately I need a newer kernel than 2.6.18 for some of my hardware 
(2.6.18 gives problems with some of my external hdd drives...). And some 
of the power management of my hardware is said to work with at least 
2.6.24...

So that's the only part I *need* to be "not-stable". *sigh*



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#465174: module-assistant doesn't compile nvidia for kernel 2.6.24

[bugreport . 20 . gpburth]

Hi!

> Unless m-a did something wrong (like unpacking the wrong package) this
> is a job for nvidia-kernel-source' maintainer, not me.

can you reassign this to him? Would be a little bit easier for me ;-)

>
>> /usr/src/modules/nvidia-kernel/nv/nv.c: At top level:
>> /usr/src/modules/nvidia-kernel/nv/nv.c:102: error: expected ‘=’, 
‘,’,  ‘;’, ‘asm’ or ‘__attribute__’ before ‘*’ token

>> /usr/src/modules/nvidia-kernel/nv/nv.c: In function ‘nvos_create_alloc’:
>> /usr/src/modules/nvidia-kernel/nv/nv.c:418: error: ‘nv_pte_t_cache’ 
 undeclared (first use in this function)

>
> nv_pte_t_cache does not exist in that line in the current version of
> nvidia-kernel-source (169.09-2). It first appears somewhere below, so I
> guess we deal with an old version of the package. Please check that and
> reassign the bug report to the appropriate package (or at least report
> the results).
>

I have package version 1.0.8776-4 installed, which is the newest package 
available in aptitude (and also the newest packages.debian.org lists for 
stable)

169.09-1 is only available for sid (and I'd like to stay stable :))

Reinstallation of the current version didn't work either.

Thanks for your help!

Bug#465174: module-assistant doesn't compile nvidia for kernel 2.6.24

[bugreport . 20 . gpburth]

Package: module-assistant
Version: 0.10.8
Severity: important


I compiled a vanilla 2.6.24 and booted. When trying to build the new 
nvidia kernel module with module-assistant the compile breaks, leaving 
only the option to view the errorlog (provided below).


I tried re-install of modass, nvidia-kernel-source and related packages 
but the build still breaks.
(Installation of the latest shell-skript-installer from nvidia makes it 
even worse: it doesn't compile too and the existing 2.6.18 and 2.6.22 
kernels wont't use their modules anymore... Uninstalled now, afterwards 
re-installed above mentioned modules)


I tried make clean and doing a fresh make without clean before using 
modass but to no avail.

Build of module for 2.6.22 still works.

Bug #461228 (module-assistant fail after make-kpkg created wrong 
linux-headers deb package on kernel 2.6.24-rc*) doesn't apply, because 
it doesn't hang on kernel sources.


Buildlog of last try:
/usr/bin/make  -f debian/rules clean
make[1]: Entering directory `/usr/src/modules/nvidia-kernel'
# select which makefile to use.
rm -f /usr/src/modules/nvidia-kernel/nv/Makefile || true
if [ 6 = 6  ]; then \
 cd /usr/src/modules/nvidia-kernel/nv ; \
 ln -s Makefile.kbuild Makefile ; \
 cd .. ; \
 if [ 0  = 1 ] ; then \
dpatch apply 04_minion ; \
 fi ; \
 if [ 0 = 1 ]; then \
dpatch apply 01_sysfs ; \
dpatch status 01_sysfs >patch-stamp ; \
dpatch apply 02_pcialias ; \
dpatch status 02_pcialias >>patch-stamp ; \
 fi ; \
fi
if [  6 = 4  ]; then \
 cd /usr/src/modules/nvidia-kernel/nv ; \
 ln -s Makefile.nvidia Makefile ; \
 cd .. ; \
fi
if [ -e patch-stamp ]; then \
   dpatch deapply-all ; \
   rm -rf patch-stamp debian/patched ; \
fi
if [ -f /usr/src/modules/nvidia-kernel/debian/control.template ]; then \
cp  /usr/src/modules/nvidia-kernel/debian/control.template
/usr/src/modules/nvidia-kernel/debian/control; \
fi
dh_testroot
rm -f build-stamp configure-stamp
/usr/bin/make clean SYSSRC=/lib/modules/2.6.24gpb-try1/source -C 
/usr/src/modules/nvidia-kernel/nv -f

Makefile
make[2]: Entering directory `/usr/src/modules/nvidia-kernel/nv'
rm -f -f nv.o nv-vm.o os-agp.o os-interface.o os-registry.o nv-i2c.o v.o 
nv-vm.o os-agp.o os-interface.o os-registry.o nv-i2c.o nvidia.mod.o

rm -f -f build-in.o nv-linux.o *.d .*.{cmd,flags}
rm -f -f nvidia.{o,ko,mod.{o,c}} nv_compiler.h *~
rm -f -f stprof stprof.o symtab.h
rm -f -rf .tmp_versions
make[2]: Leaving directory `/usr/src/modules/nvidia-kernel/nv'
rm -f /usr/src/modules/nvidia-kernel/nv/Makefile || true;
rm /usr/src/modules/nvidia-kernel/nv/gcc-check
rm /usr/src/modules/nvidia-kernel/nv/cc-sanity-check
dh_clean
rm /usr/src/modules/nvidia-kernel/debian/control
rm /usr/src/modules/nvidia-kernel/debian/dirs
rm /usr/src/modules/nvidia-kernel/debian/override
make[1]: Leaving directory `/usr/src/modules/nvidia-kernel'
echo "ROOT_CMD = "
ROOT_CMD =
/usr/bin/make  -f debian/rules binary_modules
make[1]: Entering directory `/usr/src/modules/nvidia-kernel'
# select which makefile to use.
rm -f /usr/src/modules/nvidia-kernel/nv/Makefile || true
if [ 6 = 6  ]; then \
 cd /usr/src/modules/nvidia-kernel/nv ; \
 ln -s Makefile.kbuild Makefile ; \
 cd .. ; \
 if [ 0  = 1 ] ; then \
dpatch apply 04_minion ; \
 fi ; \
 if [ 0 = 1 ]; then \
dpatch apply 01_sysfs ; \
dpatch status 01_sysfs >patch-stamp ; \
dpatch apply 02_pcialias ; \
dpatch status 02_pcialias >>patch-stamp ; \
 fi ; \
fi
if [  6 = 4  ]; then \
 cd /usr/src/modules/nvidia-kernel/nv ; \
 ln -s Makefile.nvidia Makefile ; \
 cd .. ; \
fi
if ! gcc-4.1 -v 2> /dev/null  ; then \
  echo "Compiler gcc-4.1 does not exist on the system" ; \
  exit 1; \
fi
touch configure-stamp
if [ -f /usr/src/modules/nvidia-kernel/debian/control.template ]; then \
cp  /usr/src/modules/nvidia-kernel/debian/control.template
/usr/src/modules/nvidia-kernel/debian/control; \
fi
dh_testdir
dh_testroot
PATCHLEVEL = 6
Kernel compiler version : 4.1.1
Detected compiler version : 4.1.1
Using compiler gcc-4.1 version 4.1.1
touch /usr/src/modules/nvidia-kernel/nv/gcc-check
touch /usr/src/modules/nvidia-kernel/nv/cc-sanity-check
## Main Make ##
IGNORE_CC_MISMATCH=1 CC="gcc-4.1"  /usr/bin/make -C 
/usr/src/modules/nvidia-kernel/nv -f Makefile
SYSSRC=/lib/modules/2.6.24gpb-try1/source   KBUILD_PARAMS="-C 
/lib/modules/2.6.24gpb-try1/source

SUBDIRS=/usr/src/modules/nvidia-kernel/nv" module;
make[2]: Entering directory `/usr/src/modules/nvidia-kernel/nv'

NVIDIA: calling KBUILD...
make CC=gcc-4.1 -C /lib/

Bug#426038: Duplicate of bug #403425

[bugreport . 20 . iridos]

Hi,

this is a duplicate of bug #403425

Regards
K.


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#426038: Please reassign to package xemacs21-basesupport

[bugreport . 20 . iridos]

Sorry, did not notice it was not the correct name for the package until 
too late. Please reassign to package xemacs21-basesupport.


Additional information: there is a newer version of xemacs in unstable. 
The newer packet the exact same error as in stable.


Karsten


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#426038: xemacs: Flyspell correction does not work, instead it returns "Wrong type argument: listp "

[bugreport . 20 . iridos]

Package: xemacs
Severity: normal


Using ESC-x flyspell-buffer, then clicking on a highlighted word with the 
middle mouse button does not yield a menu with the list of suggestions. 
Instead, the error "Wrong type argument: listp " is printed.
The term   seems to be the first word that the currection 
suggested as a replacement for the current misspelled word (the 
value of  is "save" if 
there is no such suggestion).


This error must be caused within the function flyspell-correct-word which 
is called by the middle-mouse click. The error appears for the current 
stable and unstable version of the dictionaries-common packet.  (I started 
out with stable, then installed the newer version of dictionaries-common 
to see if the problem went away).


The same error is _not_ present in emacs21 - here the menu with a 
suggested correction appears as it should.


Looking a bit further, I would guess it is this call, which causes the 
error message: (setq replace (flyspell-emacs-popup event poss word)) 
(although the same line is present in emacs21).


Regards,
Karsten


-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-k7
Locale: LANG=C, LC_CTYPE=de_DE (charmap=ISO-8859-1)



--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#425873: libtk8.3

[bugreport . 20 . iridos]

Package: tk8.3
Version: 8.3.5-6
Severity: important

Hi,

While t runtime library /usr/lib/libtk8.3.so.1 is in the package tk8.3, as 
it should be, the softlink /usr/lib/libtk8.3.so pointing to this file is 
in the packagage tk8.3-dev, together with /usr/lib/libtk8.3.a.
That does not make any sense, just as the run-time library belongs into 
the normal (not-dev) packagage, the softlink should also be created by 
this package.


This becomes more inconveninent, considering that tk8.3-dev conflicts with 
tk8.4-dev as pointed out in bug #312517 and so not both soft-links can be 
installed by packages (while it is of course trivial to create them 
manually).


The same behavior is seen for the packets tk8.4 tk8.4-dev (should I file 
separate bug-reports for those?).


Regards,
Karsten

-- System Information:
Debian Release: 4.0
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: i386 (i686)
Shell:  /bin/sh linked to /bin/bash
Kernel: Linux 2.6.18-4-k7
Locale: LANG=C, LC_CTYPE=de_DE (charmap=ISO-8859-1)

Versions of packages tk8.3 depends on:
ii  libc6 2.5-2  GNU C Library: Shared libraries
ii  libx11-6  2:1.0.3-7  X11 client-side library
ii  tcl8.38.3.5-5Tcl (the Tool Command Language) v8

Versions of packages tk8.3 recommends:
ii  aterm [x-terminal-emul 1.0.0-4   Afterstep XVT - a VT102 emulator f
ii  konsole [x-terminal-em 4:3.5.5a.dfsg.1-6 X terminal emulator for KDE
ii  xterm [x-terminal-emul 222-1etch2X terminal emulator

-- debconf-show failed


--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#406604: Enigmail upstream bug and patch

[Debian Bugreport Mailaddress]

Package: mozilla-thunderbird-enigmail
Version: 2:0.91-4sarge2
Severity: grave

Enigmail has had a serious bug for a long time, see
http://bugzilla.mozdev.org/show_bug.cgi?id=9730 for details.

An attacker can send properly crafted encrypted emails to the enigmail
user that will crash the receiver's instance of thunderbird.

Whether it is possible to inject code or to access the user's passphrase
using this aproach is unclear.

A patch fixing the issue appeared on the enigmail mailing list. The
latest enigmail release (from yesterday, version v0.94.2) fixes the issue).

I believe this bug justifies a security updates to sarge and etch.

Regards,
  Tobias

Patrick Brunschwig's patch:

Index: enigmail.js
===
RCS file: /cvs/enigmail/src/package/enigmail.js,v
retrieving revision 1.190
diff -u -r1.190 enigmail.js
--- enigmail.js 8 Jul 2006 16:16:50 -   1.190
+++ enigmail.js 11 Jan 2007 10:33:04 -
@@ -883,9 +883,6 @@

   DEBUG_LOG("enigmail.js: EnigmailProtocolHandler.newChannel:
messageURL="+messageUriObj.originalUrl+", "+contentType+",
"+contentCharset+"\n");

-  if (!messageUriObj.persist)
-delete gEnigmailSvc._messageIdList[messageId];
-
 } else {

   contentType = "text/plain";




-- 
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]

Bug#401738: Acknowledgement (nagios2: statuswml.cgi cannot schedule check commands)

[debian-bugreport]

I've found the cause of the problem: When using a normal browser
cmd.cgi is called from extinfo.cgi, where extinfo.cgi generates the
start_time  parameter. When calling statuswml.cgi it also
calls cmd.cgi but does not generate a start_time parameter. I made
some changes to the code to make it generate the parameter. 

--- nagios2-2.5/cgi/statuswml.c 2006-03-22 18:45:26.0 +0100
+++ nagios2-2.5_new/cgi/statuswml.c 2006-12-05 17:54:32.0 +0100
@@ -1047,6 +1047,7 @@
service *temp_service;
servicestatus *temp_servicestatus;
char last_check[MAX_DATETIME_LENGTH];
+   char buffer[MAX_INPUT_BUFFER];
int days;
int hours;
int minutes;
@@ -1155,8 +1156,10 @@
if(temp_servicestatus->checks_enabled==FALSE)
printf("Enable Checks\n",COMMAND_CGI,host_name,service_desc,CMD_ENABLE_SVC_CHECK,CMDMODE_COMMIT);
else{
+ time(&t);
+ get_time_string(&t,buffer,sizeof(buffer)-1,SHORT_DATE_TIME);
printf("Disable Checks\n",COMMAND_CGI,host_name,service_desc,CMD_DISABLE_SVC_CHECK,CMDMODE_COMMIT);
-   printf("Schedule 
Immediate Check\n",COMMAND_CGI,host_name,service_desc,CMD_SCHEDULE_SVC_CHECK,CMDMODE_COMMIT);
+   printf("Schedule 
Immediate Check\n",COMMAND_CGI,host_name,service_desc,CMD_SCHEDULE_SVC_CHECK,CMDMODE_COMMIT,
 buffer);
}
 
if(temp_servicestatus->notifications_enabled==FALSE)

-- 
Mathias Jansson
System Administrator, Midasplayer AB
S:t Göransgatan 66
SE-112 33 Stockholm
Mobile. +46 (0)70 811 75 40
Fax. +46 (0)8 545 70 439