Bug#1054008: linux-image-6.5.0-2-amd64: Can't boot due to ACPI Error (GPE0D)
Package: src:linux Version: 6.5.6-1 Severity: important Dear Maintainer, After upgrading to Linux 6.5, after the GRUB splash screen, instead of booting as usual, I get a rapidly looping message: ACPI Error: No handler or method for GPE0D, disabling event (20230331/evgpe-839) The device boots fine when selecting Linux 6.4 from the GRUB menu. -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information sys_vendor: Hewlett-Packard product_name: HP Pavilion 14 Notebook PC product_version: 088110305E0620100 chassis_vendor: Hewlett-Packard chassis_version: Chassis Version bios_vendor: Insyde bios_version: F.23 board_vendor: Hewlett-Packard board_name: 2162 board_version: 29.24 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller [8086:0a04] (rev 0b) Subsystem: Hewlett-Packard Company Haswell-ULT DRAM Controller [103c:2162] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: hsw_uncore 00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 0b) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Haswell-ULT Integrated Graphics Controller [103c:2162] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: i915 Kernel modules: i915 00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller [8086:0a0c] (rev 0b) Subsystem: Hewlett-Packard Company Haswell-ULT HD Audio Controller [103c:2162] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company 8 Series USB xHCI HC [103c:2162] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:16.0 Communication controller [0780]: Intel Corporation 8 Series HECI #0 [8086:9c3a] (rev 04) Subsystem: Hewlett-Packard Company 8 Series HECI [103c:2162] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: mei_me Kernel modules: mei_me 00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller [8086:9c20] (rev 04) Subsystem: Hewlett-Packard Company 8 Series HD Audio Controller [103c:2162] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 1 [8086:9c10] (rev e4) (prog-if 00 [Normal decode]) Subsystem: Hewlett-Packard Company 8 Series PCI Express Root Port 1 [103c:2162] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport 00:1c.1 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 2 [8086:9c12] (rev e4) (prog-if 00 [Normal decode]) Subsystem: Hewlett-Packard Company 8 Series PCI Express Root Port 2 [103c:2162] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport 00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 3 [8086:9c14] (rev e4) (prog-if 00 [Normal decode]) Subsystem: Hewlett-Packard Company 8 Series PCI Express Root Port 3 [103c:2162] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort
Bug#1051370: howdoi: Fails to find help on any topic
Package: howdoi Version: 1.1.9-1.1 Severity: grave Justification: renders package unusable Dear maintainer of howdoi, I can't seem to get howdoi to find any help: $ howdoi format date bash Sorry, couldn't find any help with that topic $ howdoi print stack trace python Sorry, couldn't find any help with that topic $ howdoi howdoi Sorry, couldn't find any help with that topic -- System Information: Debian Release: trixie/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 6.4.0-3-amd64 (SMP w/4 CPU threads; PREEMPT) Kernel taint flags: TAINT_FIRMWARE_WORKAROUND Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages howdoi depends on: ii python3 3.11.4-5+b1 ii python3-cssselect 1.2.0-2 ii python3-lxml4.9.3-1 ii python3-pygments2.15.1+dfsg-1 ii python3-pyquery 1.4.3-1 ii python3-requests2.31.0+dfsg-1 ii python3-requests-cache 0.9.8-1 howdoi recommends no packages. howdoi suggests no packages. -- no debconf information
Bug#1042578: aerc: No Reply-To completion
Package: aerc Version: 0.15.2-2 Severity: wishlist Dear aerc maintainer, There's no address book completion for the Reply-To field in the header when composing emails. To reproduce: * Enable address book completion in aerc.conf: `address-book-cmd=abook --mutt-query %s` * Add the Reply-To header to the compose window * When entering an email address in the reply-to field, there's no completion I think it would make sense if address book completion was enabled for the reply-to header field like it is for other fields for entering email addresses (From, To, CC, BCC). -- System Information: Debian Release: trixie/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 6.4.0-1-amd64 (SMP w/4 CPU threads; PREEMPT) Kernel taint flags: TAINT_WARN, TAINT_FIRMWARE_WORKAROUND Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages aerc depends on: ii libc62.37-6 ii libnotmuch5 0.37-1+b1 Versions of packages aerc recommends: ii dante-client 1.4.2+dfsg-7 ii gnupg 2.2.40-1.1 ii w3m 0.5.3+git20230121-2 Versions of packages aerc suggests: ii notmuch 0.37-1+b1 -- no debconf information
Bug#1042576: sway-notification-center: example-script error
Package: sway-notification-center Version: 0.9.0-1 Severity: normal Dear Sway notification centre maintainer, When a notification is displayed in swaync, there's a seemingly irrelevant error displayed alongside it: Failed to run script: example-script Output: To reproduce: * Run `swaync` * Run `notify-send "hello world"` * The notification is shown along with an example-script error I was expecting to just see the "hello world" notification, not an error notification. -- System Information: Debian Release: trixie/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 6.4.0-1-amd64 (SMP w/4 CPU threads; PREEMPT) Kernel taint flags: TAINT_WARN, TAINT_FIRMWARE_WORKAROUND Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages sway-notification-center depends on: ii dconf-gsettings-backend [gsettings-backend] 0.40.0-4 ii init-system-helpers 1.65.2 ii libc62.37-6 ii libcairo21.16.0-7 ii libgdk-pixbuf-2.0-0 2.42.10+dfsg-1+b1 ii libgee-0.8-2 0.20.6-1 ii libglib2.0-0 2.76.4-4 ii libgtk-3-0 3.24.38-2 ii libgtk-layer-shell0 0.8.1-1 ii libhandy-1-0 1.8.2-2 ii libjson-glib-1.0-0 1.6.6-1 ii libpango-1.0-0 1.50.14+ds-1 ii libpulse-mainloop-glib0 16.1+dfsg1-2+b1 ii libpulse016.1+dfsg1-2+b1 sway-notification-center recommends no packages. sway-notification-center suggests no packages. -- no debconf information
Bug#1042571: glasscoder: Crash when HLS streaming a WAV file
Package: glasscoder Version: 2.0.1-2 Severity: normal Dear glasscoder maintainer, I use SoX to generate a WAV file. When I try to stream it over HLS with Glasscoder, it crashes. ``` $ sox -n out.wav synth 60 $ glasscoder --server-url="http://localhost:8080"; --server-type=HLS --audio-device=FILE --file-name=out.wav glasscoder: using working directory "/tmp/glasscoder-ZiM5kw" ASSERT failure in QList::operator[]: "index out of range", file /usr/include/x86_64-linux-gnu/qt5/QtCore/qlist.h, line 579 Aborted (core dumped) ``` -- System Information: Debian Release: trixie/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 6.4.0-1-amd64 (SMP w/4 CPU threads; PREEMPT) Kernel taint flags: TAINT_WARN, TAINT_FIRMWARE_WORKAROUND Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages glasscoder depends on: ii libasound21.2.9-1 ii libc6 2.37-6 ii libcurl4 7.88.1-11 ii libgcc-s1 13.1.0-9 ii libjack-jackd2-0 [libjack-0.125] 1.9.21~dfsg-3 ii libqt5core5a 5.15.10+dfsg-3 ii libqt5network55.15.10+dfsg-3 ii libsamplerate00.2.2-3 ii libsndfile1 1.2.0-1 ii libssl3 3.0.9-1 ii libstdc++613.1.0-9 ii libtag1v5 1.13.1-1 glasscoder recommends no packages. Versions of packages glasscoder suggests: ii glassgui 2.0.1-2 ii python3 3.11.4-5 ii python3-requests 2.31.0+dfsg-1 -- no debconf information
Bug#1041119: aerc: Raw HTML when quoting HTML email
Package: aerc
Version: 0.15.2-1
Severity: normal
Dear aerc maintainer,
When creating a quoted reply to an email that _only_ has an HTML part, the
quoted email is in raw HTML:
>
>
>
>
> ...
I was hoping that the quote by default would be converted to plaintext.
I worked around this by editing the quoted_reply template to use lynx to dump
the rendered HTML:
```
X-Mailer: aerc {{version}}
On {{dateFormat (.OriginalDate | toLocal) "Mon Jan 2, 2006 at 3:04 PM MST"}},
{{(index .OriginalFrom 0).Name}} wrote:
{{if eq .OriginalMIMEType "text/html"}}
{{quote (.OriginalText | exec `lynx -dump -stdin`)}}
{{else}}
{{quote .OriginalText}}
{{end}}
```
Would it make sense to have something like that as default behaviour, perhaps
using w3m which is already a recommended dependency?
-- System Information:
Debian Release: trixie/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 6.3.0-2-amd64 (SMP w/4 CPU threads; PREEMPT)
Kernel taint flags: TAINT_FIRMWARE_WORKAROUND
Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8), LANGUAGE not set
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages aerc depends on:
ii libc62.37-5
ii libnotmuch5 0.37-1+b1
Versions of packages aerc recommends:
ii dante-client 1.4.2+dfsg-7
ii gnupg 2.2.40-1.1
pn w3m
Versions of packages aerc suggests:
ii notmuch 0.37-1+b1
-- no debconf information
Bug#1040907: aerc: Freeze when pasting to body on email compose
> Robin and I are both on wayland...I'm guessing with xclip you are on X? I > wonder > if that comes into play at all? I'm having the issue in Sway. I've noticed that the freeze happens in vim when pasting with `CTRL+V` or `SHIFT+INSERT` while pasting works fine with `p`.
Bug#1040907: aerc: Freeze when pasting to body on email compose
Package: aerc Version: 0.15.2-1 Severity: normal Dear aerc maintainer, I find that aerc almost always freezes when pasting into the compose area. It can easily be reproduced here: * Open aerc. * Compose an email. * Move cursor from headers onto the email body compose area. * In another window, open a text editor, enter "hello world" 100 times and copy it. * Back in aerc, paste into the compose area by `SHIFT+INSERT` * Some of the text will be pasted, but then aerc will get stuck, sometimes like "hell|" * Aerc stops responding to any input, including `CTRL+C` I have tested an confirmed this is an issue whether using vim or nvim text editor, and whether using kitty, alacritty or foot terminal emulator. -- System Information: Debian Release: trixie/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 6.3.0-2-amd64 (SMP w/4 CPU threads; PREEMPT) Kernel taint flags: TAINT_FIRMWARE_WORKAROUND Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages aerc depends on: ii libc62.37-5 ii libnotmuch5 0.37-1+b1 Versions of packages aerc recommends: ii dante-client 1.4.2+dfsg-7 ii gnupg 2.2.40-1.1 pn w3m Versions of packages aerc suggests: ii notmuch 0.37-1+b1 -- no debconf information
Bug#1012739: surf: Doesn't run
Package: surf Version: 2.1+git20220504-1 Severity: normal Dear Maintainer, When trying tu run Surf in Sway, I get the error below. No window shows up, and the program exits immediately. ``` $ surf 08:19 Cannot get default EGL display: EGL_BAD_PARAMETER ** (surf:27437): WARNING **: 08:19:49.338: Could not open /sys/class/dmi/id/chassis_type: Failed to open file “/sys/class/dmi/id/chassis_type”: Permission denied ** (surf:27437): WARNING **: 08:19:49.338: Could not open /sys/firmware/acpi/pm_profile: Failed to open file “/sys/firmware/acpi/pm_profile”: Permission denied (surf:27437): Gdk-WARNING **: 08:19:49.674: ../../../../../gdk/x11/gdkwindow-x11.c:5653 drawable is not a native X11 window X Error of failed request: BadWindow (invalid Window parameter) Major opcode of failed request: 18 (X_ChangeProperty) Resource id in failed request: 0x0 Serial number of failed request: 11 Current serial number in output stream: 12 ``` -- System Information: Debian Release: bookworm/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 5.18.0-1-amd64 (SMP w/4 CPU threads; PREEMPT) Kernel taint flags: TAINT_FIRMWARE_WORKAROUND Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages surf depends on: ii libc62.33-7 ii libgcr-base-3-1 3.41.0-4 ii libgcr-ui-3-13.41.0-4 ii libglib2.0-0 2.72.2-2 ii libgtk-3-0 3.24.34-1 ii libjavascriptcoregtk-4.0-18 2.36.3-1 ii libwebkit2gtk-4.0-37 2.36.3-1 ii libx11-6 2:1.7.5-1 Versions of packages surf recommends: ii curl 7.83.1-1+b1 ii kitty [x-terminal-emulator]0.21.2-1+b1 ii suckless-tools 46-2 ii x11-utils 7.7+5 Versions of packages surf suggests: ii apparmor 3.0.4-2 -- no debconf information
Bug#1011008: cage: Compose key not working
Package: cage Version: 0.1.4-3 Severity: normal Dear Maintainer, The compose key doesn't seem to work on applications running in Cage. When I run `cage foot` and type + o + /, I see "o/" entered in the terminal emulator. I was expecting "ø". -- System Information: Debian Release: bookworm/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 5.17.0-2-amd64 (SMP w/4 CPU threads; PREEMPT) Kernel taint flags: TAINT_FIRMWARE_WORKAROUND Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages cage depends on: ii libc6 2.33-7 ii libpixman-1-0 0.40.0-1 ii libwayland-server0 1.20.0-1 ii libwlroots100.15.1-2 ii libxkbcommon0 1.4.0-1 cage recommends no packages. cage suggests no packages. -- no debconf information
Bug#1011007: cage: Video output freezes until window resize
Package: cage Version: 0.1.4-3 Severity: normal Dear Maintainer, When running applications in Cage inside Sway, the video output occassionally freezes up completely. Resizing Cage appears to resume the output. I am not sure what triggers this but it happens often. When running `cage kitty`, sometimes the output will freeze before the shell prompt is even displayed. I have also observed this issue with `cage foot` and `cage firefox`, so it's unlikely to be specific to the application running inside Cage. -- System Information: Debian Release: bookworm/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 5.17.0-2-amd64 (SMP w/4 CPU threads; PREEMPT) Kernel taint flags: TAINT_FIRMWARE_WORKAROUND Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8), LANGUAGE not set Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages cage depends on: ii libc6 2.33-7 ii libpixman-1-0 0.40.0-1 ii libwayland-server0 1.20.0-1 ii libwlroots100.15.1-2 ii libxkbcommon0 1.4.0-1 cage recommends no packages. cage suggests no packages. -- no debconf information
Bug#987360: swaylock: Occassional unlock without password entered
I cannot answer for Pelle, but I was also experiencing this bug back when it was reported. FWIW: I'm unable to reproduce it with 1.6-1. That being said, triggering the bug does seem somewhat stochastic, so I can't rule out that a bunch more suspend/resume cycles would trigger it. But so far, so good! Same here, no crashes recently, yay, however, I think that this crash bug illustrates the more general issue that the lock screen is bypassed on any crash. Swaylock should be able to restart itself on failure, perhaps with a daemon. There could be more vulnerabilities of this class, right? I believe XScreensaver has a strategy for mitigating these types of vulns too. Thank you so much for your work. I wish I knew C and could help, but now I can only complain and hope someone else fixes it. I could probably write a daemon in shell script though if such a patch would be accepted, although there are probably more elegant solutions to this in the swaylock code itself.
Bug#994557: sway: Wine program windows don't update
Package: sway Version: 1.6-1 Severity: normal Dear Maintainer, When I run a Wine program, such as explorer.exe, $ wine explorer.exe it shows up, but the window content isn't updated. The mouse cursor is not displayed when hovering over, and it doesn't change size on resize so contents don't fit the window. You can interact with keyboard although the GUI is only updated on some occasions, like close confirmation dialog when closing notepad.exe; but when typing name for the file to save, the text field is not updated. I expected Wine application GUIs to update correctly in Sway, so that I can browse the web with iexplore.exe and play winemine.exe -- System Information: Debian Release: bookworm/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 5.10.0-8-amd64 (SMP w/4 CPU threads) Kernel taint flags: TAINT_FIRMWARE_WORKAROUND Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages sway depends on: ii libc62.32-2 ii libcairo21.16.0-5 ii libevdev21.11.0+dfsg-1 ii libgdk-pixbuf-2.0-0 2.42.6+dfsg-2 ii libgl1-mesa-dri 21.2.1-2 ii libgles2 1.3.4-1 ii libglib2.0-0 2.68.4-1 ii libinput10 1.16.4-3 ii libjson-c5 0.15-2 ii libpango-1.0-0 1.48.9+ds1-2 ii libpangocairo-1.0-0 1.48.9+ds1-2 ii libpcre3 2:8.39-13 ii libpixman-1-00.40.0-1 ii libsystemd0 247.9-1 ii libudev1 247.9-1 ii libwayland-client0 1.19.0-2 ii libwayland-cursor0 1.19.0-2 ii libwayland-server0 1.19.0-2 ii libwlroots8 0.13.0-1 ii libxcb1 1.14-3 ii libxkbcommon01.0.3-2 ii policykit-1 0.105-31 ii swaybg 1.0-2+b1 Versions of packages sway recommends: ii foot 1.6.4-1 ii suckless-tools46-1 ii sway-backgrounds 1.5.1-2 Versions of packages sway suggests: ii swayidle1.7-1 ii swaylock1.5-2+b1 ii xdg-desktop-portal-wlr 0.4.0-1 -- no debconf information
Bug#993969: sway: Unusable collapsed dropdown menus
Package: sway Version: 1.5.1-2 Severity: normal Tags: a11y Dear Maintainer, I'm using Gimp for some image editing in Sway. When the workspace that Gimp is on is set to use stacked or tabbed layout then the 'Edit' menu shows up in a collapsed state with only arrows and 1 pixel of menu text visible. Same with 'View' and 'Image'. In the default layout, the 'Image' dropdown looks fine, but 'Edit' and 'View' don't show up at all. It looks like this happens when the dropdown menu is to tall for my laptop screen. I expected a scrollable dropdown to show the actual menu content, and I expected it to show up regardless of chosen workspace layout in Sway. -- System Information: Debian Release: bookworm/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 5.10.0-8-amd64 (SMP w/4 CPU threads) Kernel taint flags: TAINT_FIRMWARE_WORKAROUND Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages sway depends on: ii libc62.31-17 ii libcairo21.16.0-5 ii libevdev21.11.0+dfsg-1 ii libgdk-pixbuf-2.0-0 2.42.6+dfsg-2 ii libgl1-mesa-dri 21.2.1-2 ii libgles2 1.3.4-1 ii libglib2.0-0 2.68.4-1 ii libinput10 1.16.4-3 ii libjson-c5 0.15-2 ii libpango-1.0-0 1.48.9+ds1-2 ii libpangocairo-1.0-0 1.48.9+ds1-2 ii libpcre3 2:8.39-13 ii libpixman-1-00.40.0-1 ii libsystemd0 247.9-1 ii libwayland-client0 1.19.0-2 ii libwayland-cursor0 1.19.0-2 ii libwayland-server0 1.19.0-2 ii libwlroots7 0.12.0-2 ii libxcb1 1.14-3 ii libxkbcommon01.0.3-2 ii policykit-1 0.105-31 ii swaybg 1.0-2+b1 Versions of packages sway recommends: pn foot ii suckless-tools46-1 ii sway-backgrounds 1.5.1-2 Versions of packages sway suggests: ii swayidle1.7-1 ii swaylock1.5-2+b1 ii xdg-desktop-portal-wlr 0.4.0-1 -- no debconf information
Bug#993165: mdk4: Example files not included
Package: mdk4 Version: 4.2-1 Severity: minor Dear Maintainer, The documentation viewed with `man mdk4` refers to an example file: > -v > Read MACs and SSIDs from file. See example file! However, this example file is not included in the mdk4 package: $dpkg -L mdk4 /. /usr /usr/sbin /usr/sbin/mdk4 /usr/share /usr/share/doc /usr/share/doc/mdk4 /usr/share/doc/mdk4/changelog.Debian.gz /usr/share/doc/mdk4/changelog.gz /usr/share/doc/mdk4/copyright /usr/share/man /usr/share/man/man2 /usr/share/man/man2/mdk4.2.gz The examples are included in the mdk3 package. -- System Information: Debian Release: bookworm/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 5.10.0-8-amd64 (SMP w/4 CPU threads) Kernel taint flags: TAINT_FIRMWARE_WORKAROUND Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages mdk4 depends on: ii aircrack-ng 1:1.6+git20210130.91820bc-2 ii libc6 2.31-17 ii libnl-3-200 3.4.0-1+b1 ii libnl-genl-3-200 3.4.0-1+b1 ii libpcap0.81.10.1-2 mdk4 recommends no packages. mdk4 suggests no packages. -- no debconf information
Bug#991241: lrx-proc: command not found
Package: apertium-swe-dan Version: 0.8.1-1 Severity: grave Justification: renders package unusable Dear Maintainer, When trying to use Apertium with the Swedish-Danish pair, I get the following error at startup, and no translation happens: $ apertium dan-swe /dev/fd/63: line 1: lrx-proc: command not found hallo verden Apertium works fine with other language pairs, like English-Esperanto: $ apertium en-eo hello world hala mondo -- System Information: Debian Release: 11.0 APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 5.10.0-8-amd64 (SMP w/4 CPU threads) Kernel taint flags: TAINT_FIRMWARE_WORKAROUND Locale: LANG=en_DK.UTF-8, LC_CTYPE=en_DK.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages apertium-swe-dan depends on: ii apertium 3.7.1-1 ii cg3 1.3.2-1 apertium-swe-dan recommends no packages. apertium-swe-dan suggests no packages. -- no debconf information
Bug#986769: wireshark: Dropdown menus invisible in Sway
On Sun, May 09, 2021 at 06:26:21PM +0200, Balint Reczey wrote: Could you please tell which drop-down menus did not work The drop-down menus in the main menu don't work: File, Edit, View, Go, Capture, etc. or if you have some special config that could affect the behaviour? When running Wireshark in Sway with a newly created user, the drop-downs work. However, I haven't intentionally changed any Qt configuration, and neither `.qt`, `.config/Trolltech/` or `.config/Trolltech.conf` exist. I'm not sure where else accidentally created Qt configuration could be hiding.
Bug#988091: batalert: Fails to start because BAT0 is assumed
Package: batalert Version: 0.4.0-1 Severity: important Dear Maintainer, I get this error when running batalert: ``` $ batalert Traceback (most recent call last): 5: from /usr/bin/batalert:23:in `' 4: from /usr/bin/batalert:23:in `load' 3: from /usr/share/rubygems-integration/all/gems/batalert-0.4.0/exe/batalert:5:in `' 2: from /usr/share/rubygems-integration/all/gems/batalert-0.4.0/lib/batalert.rb:14:in `main' 1: from /usr/share/rubygems-integration/all/gems/batalert-0.4.0/lib/batalert.rb:14:in `open'/usr/share/rubygems-integration/all/gems/batalert-0.4.0/lib/batalert.rb:14:in `initialize': No such file or directory @ rb_sysopen - /sys/class/power_supply/BAT0/capacity (Errno::ENOENT) ``` This appears to be caused by batalert making an incorrect assumption about the battery name: ``` $ ls /sys/class/power_supply/ ACAD BAT1 ``` I expected batalert to either correctly detect the device battery name or at least to provide a flag for setting it. -- System Information: Debian Release: 11.0 APT prefers unstable-debug APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 5.10.0-6-amd64 (SMP w/2 CPU threads) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages batalert depends on: ii ruby1:2.7+2 ii ruby-espeak 1.0.4-2 ii ruby-libnotify 0.9.4-3 batalert recommends no packages. batalert suggests no packages. -- no debconf information
Bug#987999: pychess: Puzzles don't open
Package: pychess Version: 1.0.0-1.1 Severity: important Dear Maintainer, I launch Pychess, select the 'Puzzles' category on the Welcome screen and press 'Start learning'. I am then taken to the learn tab but there's no chess board. Double-clicking on a puzzle listed in the sidebar does nothing except for printing an error message on the console: ``` Traceback (most recent call last): File "/usr/lib/python3/dist- packages/pychess/perspectives/learn/PuzzlesPanel.py", line 115, in row_activated start_puzzle_from(filename) File "/usr/lib/python3/dist- packages/pychess/perspectives/learn/PuzzlesPanel.py", line 143, in start_puzzle_from start_puzzle_game(gamemodel, filename, records, index, rec) File "/usr/lib/python3/dist- packages/pychess/perspectives/learn/PuzzlesPanel.py", line 158, in start_puzzle_game engine_name = discoverer.getName(engine) File "/usr/lib/python3/dist-packages/pychess/Players/engineNest.py", line 437, in getName return engine["name"] TypeError: 'NoneType' object is not subscriptable ``` -- System Information: Debian Release: 11.0 APT prefers unstable-debug APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 5.10.0-6-amd64 (SMP w/2 CPU threads) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages pychess depends on: ii gaviotatb0.4-2.1 ii gir1.2-gdkpixbuf-2.0 2.42.2+dfsg-1 ii gir1.2-glib-2.0 1.66.1-1+b1 ii gir1.2-gst-plugins-base-1.0 1.18.4-2 ii gir1.2-gstreamer-1.0 1.18.4-2 ii gir1.2-gtk-3.0 3.24.24-3 ii gir1.2-gtksource-3.0 3.24.11-2 ii gir1.2-pango-1.0 1.48.2-1 ii gir1.2-rsvg-2.0 2.50.3+dfsg-1 ii gnome-icon-theme 3.12.0-3 ii gobject-introspection1.66.1-1+b1 ii libgaviotatb10.4-2.1 ii python3 3.9.2-3 ii python3-cairo1.16.2-4+b2 ii python3-gi 3.38.0-2 ii python3-gi-cairo 3.38.0-2 ii python3-websockets 8.1-1 pychess recommends no packages. pychess suggests no packages.
Bug#987901: blueman: Takes a few tries to connect to device
Package: blueman Version: 2.1.4-1+b1 Severity: normal Dear Maintainer, When I open `blueman-manager` and try to connect to a Bluetooth speaker by clicking *Device* and then *Connect*, I often get the error: > Connection failed: Software caused connection abort This will keeps happening the first few times I try connecting, but it always connects eventually. I was expecting that when I clicked *Connect*, than Blueman would then connect to the device (perhaps automatically retry upon failure) instead of me having to repeatedly click on the same menu item. -- System Information: Debian Release: 11.0 APT prefers unstable-debug APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 5.10.0-6-amd64 (SMP w/2 CPU threads) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages blueman depends on: ii adwaita-icon-theme3.38.0-1 ii bluez 5.55-3 ii bluez-obexd 5.55-3 ii dbus 1.12.20-2 ii dbus-user-session [default-dbus-session-bus] 1.12.20-2 ii dbus-x11 [dbus-session-bus] 1.12.20-2 ii dconf-gsettings-backend [gsettings-backend] 0.38.0-2 ii gir1.2-ayatanaappindicator3-0.1 0.5.5-3 ii gir1.2-gdkpixbuf-2.0 2.42.2+dfsg-1 ii gir1.2-glib-2.0 1.66.1-1+b1 ii gir1.2-gtk-3.03.24.24-3 ii gir1.2-nm-1.0 1.30.0-2 ii gir1.2-pango-1.0 1.48.2-1 ii gnome-icon-theme 3.12.0-3 ii libbluetooth3 5.55-3 ii libc6 2.31-11 ii libglib2.0-0 2.66.8-1 ii libpulse-mainloop-glib0 14.2-2 ii librsvg2-common 2.50.3+dfsg-1 ii notification-daemon 3.20.0-4 ii policykit-1 0.105-30 ii python3 3.9.2-3 ii python3-cairo 1.16.2-4+b2 ii python3-gi3.38.0-2 ii python3-gi-cairo 3.38.0-2 Versions of packages blueman recommends: ii pulseaudio-module-bluetooth 14.2-2 blueman suggests no packages.
Bug#987360: swaylock: Occassional unlock without password entered
Package: swaylock Version: 1.5-2 Severity: grave Tags: security Justification: user security hole X-Debbugs-Cc: Debian Security Team Dear Maintainer, I'm running Sway and use Swaylock to lock the screen when the laptop is asleep. Sometimes when resuming from sleep, Swaylock will respond to the first keypress of the password and display a spinner, but then freeze for about half a minute and then just disappear and thereby allow access to Sway without the password being entered. I am not yet sure of the exact conditions that cause this issue but it's happened >10 times so far on my system. -- System Information: Debian Release: 11.0 APT prefers unstable-debug APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 5.10.0-6-amd64 (SMP w/2 CPU threads) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages swaylock depends on: ii libc6 2.31-11 ii libcairo2 1.16.0-5 ii libgdk-pixbuf2.0-0 2.40.2-2 ii libglib2.0-02.66.8-1 ii libpam0g1.4.0-7 ii libwayland-client0 1.19.0-2 ii libxkbcommon0 1.0.3-2 swaylock recommends no packages. swaylock suggests no packages.
Bug#986861: pragha: No way of sorting album by track number
On 17/04/2021 00:43, Gabriel F. T. Gomes wrote: I just tested it under sway and the column selection pop up showed up normally. I added a new user to the system. When starting Sway and Pragha with the default settings, the columns selection pop up does indeed show up. It must then be a configuration issue, perhaps some GTK settings rather than an issue with Pragha. I'm have no idea which setting, but it's strange that it appears to only be affecting Pragha. OpenPGP_0x3A57CE276008178F.asc Description: OpenPGP public key OpenPGP_signature Description: OpenPGP digital signature
Bug#986862: lollypop: Filename args doesn't work when Lollypop is already running
On 13/04/2021 01:41, Andreas Ronnquist wrote: Thanks for your report - I can reproduce the problem to some extent. What if you run the command and include the full path to the file? Does this change things? I tried specifying the path in various ways to Lollypop: * `lollypop foo.mp3` * `lollypop ~/foo.mp3` * `lollypop $HOME/foo.mp3` * `lollypop /home/pelle/foo.mp3` I thought I'd narrowed down a specific path formatting issue. I ran those commands again, just to check, but now they gave a different result. Then I tried running `lollypop /home/pelle/foo.mp3` over and over again, and this resulted in foo.mp3 being played about 10% of the time, and a random track the rest of the time. The behaviour appears to be nondeterministic. What settings to you have for playback? Anything exotic, like "Continuous playback", "Automatic playback (random)" or "Automatic playback (similar)"? No, none of those are enabled. I haven't changed the default playback settings. OpenPGP_0x3A57CE276008178F.asc Description: OpenPGP public key OpenPGP_signature Description: OpenPGP digital signature
Bug#986862: lollypop: Filename args doesn't work when Lollypop is already running
Package: lollypop Version: 1.4.19-1 Severity: normal Dear Maintainer, Running `lollypop foo.mp3` will open up Lollypop and play foo.mp3, unless Lollypop is already running, in which case Lollypop will switch to a random track. I expected the command `lollypop foo.mp3` to play foo.mp3, even when Lollypop is already open. -- System Information: Debian Release: 11.0 APT prefers unstable-debug APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 5.10.0-5-amd64 (SMP w/2 CPU threads) Kernel taint flags: TAINT_CRAP Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages lollypop depends on: ii dconf-gsettings-backend [gsettings-backend] 0.38.0-2 ii gir1.2-gst-plugins-base-1.0 1.18.3-1 ii gir1.2-gstreamer-1.0 1.18.3-2 ii gir1.2-handy-1 1.0.3-2 ii gir1.2-secret-1 0.20.4-2 ii gir1.2-soup-2.4 2.72.0-2 ii gir1.2-totemplparser-1.0 3.26.5-5 ii libhandy-1-0 1.0.3-2 ii python3 3.9.2-3 ii python3-bs4 4.9.3-1 ii python3-cairo1.16.2-4+b2 ii python3-gi 3.38.0-2 ii python3-gi-cairo 3.38.0-2 ii python3-gst-1.0 1.18.3-1 ii python3-pil 8.1.2-1 Versions of packages lollypop recommends: ii youtube-dl 2021.02.10-1 Versions of packages lollypop suggests: ii gstreamer1.0-libav 1.18.3-1
Bug#986861: pragha: No way of sorting album by track number
Package: pragha Version: 1.3.4-2+b1 Severity: normal Dear Maintainer, It appears there is no way to sort an album (or several albums in a playlist) by track order. The available column headers for sorting are 'Title', 'Artist', 'Album' and 'Length'. When clicking on 'Album' to sort the tracks into albums, the track order within those albums will be either alphabetical by title or by length, depending on what sort mode was previously selected. I expected it would be possible to sort the playlist by track order within their respective albums so they could be played in the order the appear on the album(s). -- System Information: Debian Release: 11.0 APT prefers unstable-debug APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 5.10.0-5-amd64 (SMP w/2 CPU threads) Kernel taint flags: TAINT_CRAP Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages pragha depends on: ii libc6 2.31-11 ii libcairo2 1.16.0-5 ii libcddb21.3.2-6+b1 ii libcdio-cdda2 10.2+2.0.0-1+b2 ii libcdio19 2.1.0-2 ii libgdk-pixbuf2.0-0 2.40.2-2 ii libglib2.0-02.66.8-1 ii libglyr11.0.10-1 ii libgstreamer-plugins-base1.0-0 1.18.3-1 ii libgstreamer1.0-0 1.18.3-2 ii libgtk-3-0 3.24.24-3 ii libgudev-1.0-0 234-1 ii libkeybinder-3.0-0 0.3.2-1.1 ii libmtp9 1.1.17-3 ii libnotify4 0.7.9-3 ii libpango-1.0-0 1.46.2-3 ii libpeas-1.0-0 1.28.0-2+b1 ii libsoup2.4-12.72.0-2 ii libsqlite3-03.34.1-3 ii libtagc01.11.1+dfsg.1-3 ii libtotem-plparser18 3.26.5-5 Versions of packages pragha recommends: ii gstreamer1.0-plugins-good 1.18.3-1 ii gstreamer1.0-pulseaudio1.18.3-1 pragha suggests no packages.
Bug#986858: quodlibet: Crashes when playing any audio feed
Package: quodlibet Version: 4.4.0-1 Severity: normal Dear Maintainer, QuodLibet crashes when trying to play anything from an audio feed. To reproduce this issue, go to Browse -> Audio Feeds, add a new audio feed (e.g. http://www.democracynow.org/podcast.xml ), then double-click on any entry in the feed and Quodlibet crashes. I tested QuodLibet 4.4.0-1 and 4.3.0-1, and both versions have this issue. -- System Information: Debian Release: 11.0 APT prefers unstable-debug APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 5.10.0-5-amd64 (SMP w/2 CPU threads) Kernel taint flags: TAINT_CRAP Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages quodlibet depends on: ii exfalso 4.4.0-1 ii gir1.2-gst-plugins-base-1.0 1.18.3-1 ii gir1.2-gstreamer-1.0 1.18.3-2 ii gir1.2-keybinder-3.0 0.3.2-1.1 ii gstreamer1.0-alsa1.18.3-1 ii gstreamer1.0-plugins-base1.18.3-1 ii gstreamer1.0-plugins-good1.18.3-1 ii gstreamer1.0-plugins-ugly1.18.3-1 ii gstreamer1.0-pulseaudio 1.18.3-1 ii python3 3.9.2-3 Versions of packages quodlibet recommends: ii gir1.2-gtksource-3.0 3.24.11-2 ii gir1.2-webkit2-4.02.30.6-1 ii notification-daemon 3.20.0-4 ii python3-dbus 1.2.16-5 ii python3-pyinotify 0.9.6-1.3 Versions of packages quodlibet suggests: ii gstreamer1.0-plugins-bad 1.18.3-1+b1
Bug#986817: firefox: Firefox freezes in Wayland under moderate load
Package: firefox Version: 87.0-2 Severity: normal Reference to the bug on Bugzilla: https://bugzilla.mozilla.org/show_bug.cgi?id=1704489 -- Package-specific info: -- Addons package information -- System Information: Debian Release: 11.0 APT prefers unstable-debug APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 5.10.0-5-amd64 (SMP w/2 CPU threads) Kernel taint flags: TAINT_CRAP Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages firefox depends on: ii debianutils 4.11.2 ii fontconfig 2.13.1-4.2 ii libatk1.0-0 2.36.0-2 ii libc62.31-11 ii libcairo-gobject21.16.0-5 ii libcairo21.16.0-5 ii libdbus-1-3 1.12.20-2 ii libdbus-glib-1-2 0.110-6 ii libevent-2.1-7 2.1.12-stable-1 ii libffi7 3.3-6 ii libfontconfig1 2.13.1-4.2 ii libfreetype6 2.10.4+dfsg-1 ii libgcc-s110.2.1-6 ii libgdk-pixbuf-2.0-0 2.42.2+dfsg-1 ii libglib2.0-0 2.66.8-1 ii libgtk-3-0 3.24.24-3 ii libnspr4 2:4.29-1 ii libnss3 2:3.63-1 ii libpango-1.0-0 1.46.2-3 ii libstdc++6 10.2.1-6 ii libvpx6 1.9.0-1 ii libx11-6 2:1.7.0-2 ii libx11-xcb1 2:1.7.0-2 ii libxcb-shm0 1.14-3 ii libxcb1 1.14-3 ii libxcomposite1 1:0.4.5-1 ii libxdamage1 1:1.1.5-2 ii libxext6 2:1.3.3-1.1 ii libxfixes3 1:5.0.3-2 ii libxrender1 1:0.9.10-1 ii procps 2:3.3.17-5 ii zlib1g 1:1.2.11.dfsg-2 Versions of packages firefox recommends: ii libavcodec58 7:4.3.2-0+deb11u1 Versions of packages firefox suggests: ii fonts-lmodern 2.004.5-6.1 pn fonts-stix | otf-stix ii libcanberra0 0.30-7 ii libgssapi-krb5-2 1.18.3-5 ii libgtk2.0-02.24.33-1 ii pulseaudio 14.2-2 -- no debconf information
Bug#986769: wireshark: Dropdown menus invisible in Sway
Package: wireshark Version: 3.4.4-1 Severity: normal Dear Maintainer, Wireshark's dropdown menus are invisible in Sway (the Wayland compositor). The invisible dropdown menu entries can't be clicked but they can still be activated via keyboard. The dropdown menus in other QT-based apps (VLC, Krita, …) work fine in Sway. A workaround is to run `ssh -X localhost wireshark` in Sway, or to run Wireshark inside Weston. -- System Information: Debian Release: 11.0 APT prefers unstable-debug APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Kernel: Linux 5.10.0-5-amd64 (SMP w/2 CPU threads) Kernel taint flags: TAINT_CRAP Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages wireshark depends on: ii wireshark-qt 3.4.4-1 wireshark recommends no packages. wireshark suggests no packages.
Bug#986110: gnome-software: Fails to close properly
Package: gnome-software Version: 3.38.1-1 Severity: normal Dear Maintainer, The close button (x) in the upper right corner of the Gnome Software window doesn't properly close Gnome Software. To reproduce: - Run `gnome-software` from the shell - Once the Gnome Software window appears, click on the close button - The Gnome Software window will disappear but the gnome-software process will keep running -- System Information: Debian Release: bullseye/sid APT prefers unstable-debug APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.10.0-4-amd64 (SMP w/2 CPU threads) Kernel taint flags: TAINT_CRAP Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages gnome-software depends on: ii appstream0.14.2-1 ii apt-config-icons 0.14.2-1 ii dconf-gsettings-backend [gsettings-backend] 0.38.0-2 ii gnome-software-common3.38.1-1 ii gsettings-desktop-schemas3.38.0-2 ii libappstream-glib8 0.7.18-1 ii libatk1.0-0 2.36.0-2 ii libc62.31-10 ii libcairo21.16.0-5 ii libfwupd21.5.7-3 ii libgdk-pixbuf-2.0-0 2.42.2+dfsg-1 ii libglib2.0-0 2.66.8-1 ii libgspell-1-21.8.4-1 ii libgtk-3-0 3.24.24-3 ii libgtk3-perl 0.038-1 ii libgudev-1.0-0 234-1 ii libjson-glib-1.0-0 1.6.2-1 ii libmalcontent-0-00.10.0-2 ii libpackagekit-glib2-18 1.2.2-2 ii libpolkit-gobject-1-00.105-30 ii libsoup2.4-1 2.72.0-2 ii libxmlb1 0.1.15-2 ii packagekit 1.2.2-2 ii software-properties-gtk 0.96.20.2-2.1 Versions of packages gnome-software recommends: ii fwupd 1.5.7-3 Versions of packages gnome-software suggests: pn apt-config-icons-hidpi pn gnome-software-plugin-flatpak pn gnome-software-plugin-snap
Bug#986002: gimp: Cage transform creates visual glitches
A screenshot of the glitch.
Bug#986002: gimp: Cage transform creates visual glitches
Package: gimp Version: 2.10.22-3 Severity: normal Dear Maintainer, Cage transform creates visual glitches. These glitches appear just after selecting the cage transform area, before any transformation are applied at all. Sometimes these glitches appear in a totally different part of the image than where the cage selection is at. To reproduce: - Create a new 256x256 image - Put a bell pepper stamp in the upper left corner - Make a four point selection using the cage transform tool on the bell pepper in the upper left corner - Now a large visual glitch (a heavily geometrically distorted bell pepper but no distorted colours) may appear in the lower right corner - After pressing Enter to apply the cage transform, the visual glitch will stay in the image, even if to points of the cage transform selection were moved anywhere -- System Information: Debian Release: bullseye/sid APT prefers unstable-debug APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.10.0-4-amd64 (SMP w/2 CPU threads) Kernel taint flags: TAINT_CRAP Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages gimp depends on: ii gimp-data2.10.22-3 ii graphviz 2.42.2-4+b2 ii libaa1 1.4p5-48 ii libbabl-0.1-01:0.1.86-1 ii libbz2-1.0 1.0.8-4 ii libc62.31-10 ii libcairo21.16.0-5 ii libfontconfig1 2.13.1-4.2 ii libfreetype6 2.10.4+dfsg-1 ii libgcc-s110.2.1-6 ii libgdk-pixbuf-2.0-0 2.42.2+dfsg-1 ii libgegl-0.4-01:0.4.28-3 ii libgexiv2-2 0.12.1-1 ii libgimp2.0 2.10.22-3 ii libglib2.0-0 2.66.8-1 ii libgs9 9.53.3~dfsg-7 ii libgtk2.0-0 2.24.33-1 ii libgudev-1.0-0 234-1 ii libharfbuzz0b2.7.4-1 ii libheif1 1.11.0-1 ii libilmbase25 2.5.4-1 ii libjpeg62-turbo 1:2.0.6-4 ii libjson-glib-1.0-0 1.6.2-1 ii liblcms2-2 2.12~rc1-2 ii liblzma5 5.2.5-2 ii libmng1 1.0.10+dfsg-3.1+b5 ii libmypaint-1.5-1 1.6.0-2 ii libopenexr25 2.5.4-1 ii libopenjp2-7 2.4.0-3 ii libpango-1.0-0 1.46.2-3 ii libpangocairo-1.0-0 1.46.2-3 ii libpangoft2-1.0-01.46.2-3 ii libpng16-16 1.6.37-3 ii libpoppler-glib8 20.09.0-3.1 ii librsvg2-2 2.50.3+dfsg-1 ii libstdc++6 10.2.1-6 ii libtiff5 4.2.0-1 ii libwebp6 0.6.1-2+b1 ii libwebpdemux20.6.1-2+b1 ii libwebpmux3 0.6.1-2+b1 ii libwmf0.2-7 0.2.8.4-17 ii libx11-6 2:1.7.0-2 ii libxcursor1 1:1.2.0-2 ii libxext6 2:1.3.3-1.1 ii libxfixes3 1:5.0.3-2 ii libxmu6 2:1.1.2-2+b3 ii libxpm4 1:3.5.12-1 ii xdg-utils1.1.3-4 ii zlib1g 1:1.2.11.dfsg-2 Versions of packages gimp recommends: ii ghostscript 9.53.3~dfsg-7 Versions of packages gimp suggests: pn gimp-data-extras pn gimp-help-en | gimp-help ii gvfs-backends 1.46.2-1 ii libasound21.2.4-1.1
Bug#985208: terminology: Fails to start in Wayland
Package: terminology Version: 1.9.0-1 Severity: important Dear Maintainer, I tried running Terminology in Wayland but it didn't start. Here's the output: Xlib: extension "DPMS" missing on display ":0". Xlib: extension "MIT-SCREEN-SAVER" missing on display ":0". Xlib: extension "MIT-SCREEN-SAVER" missing on display ":0". ERR<215463>:elementary ../src/lib/elementary/efl_ui_focus_manager_calc.c:1529 _efl_ui_focus_manager_calc_efl_ui_focus_manager_manager_focus_set() Could not fetch a node located at 0x40045193 ## Copy & Paste the below (until EOF) into a terminal, then hit Enter eina_btlog << EOF /lib/x86_64-linux-gnu/libeina.so.1 0x7f5d9b79bebc 0x7f5d9b76f000 /lib/x86_64-linux-gnu/libeina.so.1 0x7f5d9b79d0c1 0x7f5d9b76f000 /lib/x86_64-linux-gnu/libeina.so.1 0x7f5d9b79e6f3 0x7f5d9b76f000 /lib/x86_64-linux-gnu/libelementary.so.1 0x7f5d9b5d324e 0x7f5d9b276000 /lib/x86_64-linux-gnu/libelementary.so.1 0x7f5d9b5cd552 0x7f5d9b276000 /lib/x86_64-linux-gnu/libelementary.so.1 0x7f5d9b5d0650 0x7f5d9b276000 /lib/x86_64-linux-gnu/libelementary.so.1 0x7f5d9b5cf1e2 0x7f5d9b276000 /lib/x86_64-linux-gnu/libelementary.so.1 0x7f5d9b56c7e3 0x7f5d9b276000 /lib/x86_64-linux-gnu/libelementary.so.1 0x7f5d9b56bf42 0x7f5d9b276000 /lib/x86_64-linux-gnu/libelementary.so.1 0x7f5d9b5824c7 0x7f5d9b276000 /lib/x86_64-linux-gnu/libelementary.so.1 0x7f5d9b581ef2 0x7f5d9b276000 /lib/x86_64-linux-gnu/libelementary.so.1 0x7f5d9b58251b 0x7f5d9b276000 /lib/x86_64-linux-gnu/libelementary.so.1 0x7f5d9b5837fc 0x7f5d9b276000 /lib/x86_64-linux-gnu/libefl.so.10x7f5d9ae54d50 0x7f5d9ae33000 /lib/x86_64-linux-gnu/libevas.so.1 0x7f5d9b9c596a 0x7f5d9b89e000 /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aec2f3a 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aec2f3a 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aec2f3a 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aec2f3a 0x7f5d9aeb /lib/x86_64-linux-gnu/libelementary.so.1 0x7f5d9b5800e4 0x7f5d9b276000 /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aec2f3a 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aec2f3a 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aecb90b 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aecbd58 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aec2182 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aec2182 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aecbe86 0x7f5d9aeb /lib/x86_64-linux-gnu/libevas.so.1 0x7f5d9b9d448d 0x7f5d9b89e000 /lib/x86_64-linux-gnu/libevas.so.1 0x7f5d9b9d44d8 0x7f5d9b89e000 /lib/x86_64-linux-gnu/libevas.so.1 0x7f5d9b9d314a 0x7f5d9b89e000 /lib/x86_64-linux-gnu/libevas.so.1 0x7f5d9b9d314a 0x7f5d9b89e000 /lib/x86_64-linux-gnu/libevas.so.1 0x7f5d9b9d7140 0x7f5d9b89e000 /lib/x86_64-linux-gnu/libevas.so.1 0x7f5d9b9c5df8 0x7f5d9b89e000 /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aec2f3a 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aecb90b 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aecbd58 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aec2182 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aec2182 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aecbe86 0x7f5d9aeb /lib/x86_64-linux-gnu/libelementary.so.1 0x7f5d9b59d162 0x7f5d9b276000 /lib/x86_64-linux-gnu/libevas.so.1 0x7f5d9b9d314a 0x7f5d9b89e000 /lib/x86_64-linux-gnu/libevas.so.1 0x7f5d9b9d7140 0x7f5d9b89e000 /lib/x86_64-linux-gnu/libevas.so.1 0x7f5d9b9c5df8 0x7f5d9b89e000 /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aec2f3a 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aec2f3a 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aec2f3a 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aec2f3a 0x7f5d9aeb /lib/x86_64-linux-gnu/libelementary.so.1 0x7f5d9b5800e4 0x7f5d9b276000 /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aec2f3a 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aecb90b 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aecbd58 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aec2182 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aec2182 0x7f5d9aeb /lib/x86_64-linux-gnu/libeo.so.1 0x7f5d9aecbe86 0x7f5d9aeb /usr/bin/terminology 0x55f7c1dc1db8 0x55f7c1d6 /usr/bin/terminology 0x55f7c1dc1ec7 0x55f7c1d6 /usr/bin/terminology 0x55f7c1d810f1 0x55f7c1d6 /usr/bin/terminology 0x55f7c1d7569d 0x55f7c1d6 /lib/x86_64-linux-gnu/libc.so.6 0x7f5d9aefed0a 0x7f5d9aed8000 /usr/bin/terminology 0x55f7c1d756da 0x55f7c1d6 EOF ERR<215463>:efreet_cache ../src/lib/efreet/efreet_cache.c:432 efreet_cache_shutdown() This application has
Bug#985205: sway: Tray icons not clickable
Package: sway Version: 1.5.1-2 Severity: normal Dear Maintainer, I have launched some applications that display tray icons: $ redshift-gtk & $ nm-applet --indicator & $ blueman-applet & However, when clicking any of these icons, nothing happens. I expected the tray icons to respond to being clicked. For nm-applet that would mean showing the network connections menu, etc. -- System Information: Debian Release: bullseye/sid APT prefers unstable-debug APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.10.0-4-amd64 (SMP w/2 CPU threads) Kernel taint flags: TAINT_CRAP Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages sway depends on: ii libc62.31-9 ii libcairo21.16.0-5 ii libevdev21.11.0+dfsg-1 ii libgdk-pixbuf-2.0-0 2.42.2+dfsg-1 ii libgl1-mesa-dri 20.3.4-1 ii libgles2 1.3.2-1 ii libglib2.0-0 2.66.7-2 ii libinput10 1.16.4-3 ii libjson-c5 0.15-2 ii libpango-1.0-0 1.46.2-3 ii libpangocairo-1.0-0 1.46.2-3 ii libpcre3 2:8.39-13 ii libpixman-1-00.40.0-1 ii libsystemd0 247.3-3 ii libwayland-client0 1.19.0-2 ii libwayland-cursor0 1.19.0-2 ii libwayland-server0 1.19.0-2 ii libwlroots7 0.12.0-2 ii libxcb1 1.14-3 ii libxkbcommon01.0.3-2 ii policykit-1 0.105-30 ii swaybg 1.0-2 Versions of packages sway recommends: ii foot 1.6.4-1 pn suckless-tools ii sway-backgrounds 1.5.1-2 Versions of packages sway suggests: ii swayidle1.6-2 ii swaylock1.5-2 pn xdg-desktop-portal-wlr
Bug#985201: flameshot: Unable to capture screen in Sway
Package: flameshot Version: 0.9.0+ds1-1 Severity: important Dear Maintainer, After starting Flameshot, a tray icon appears. When clicking on that icon, a notification is displayed: > Flameshot Info > Unable to capture screen -- System Information: Debian Release: bullseye/sid APT prefers unstable-debug APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.10.0-4-amd64 (SMP w/2 CPU threads) Kernel taint flags: TAINT_CRAP Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages flameshot depends on: ii hicolor-icon-theme0.17-2 ii libc6 2.31-9 ii libfmt7 7.1.3+ds1-5 ii libgcc-s1 10.2.1-6 ii libqt5core5a 5.15.2+dfsg-5 ii libqt5dbus5 5.15.2+dfsg-5 ii libqt5gui55.15.2+dfsg-5 ii libqt5network55.15.2+dfsg-5 ii libqt5svg55.15.2-2 ii libqt5widgets55.15.2+dfsg-5 ii libspdlog1 [libspdlog1-fmt7] 1:1.8.1+ds-2.1 ii libstdc++610.2.1-6 flameshot recommends no packages. Versions of packages flameshot suggests: ii ca-certificates 20210119 ii openssl 1.1.1j-1
Bug#985200: chessx: Fails to launch under Sway
Package: chessx
Version: 1.4.6-2+b1
Severity: normal
Dear Maintainer,
ChessX can't be launched under Sway. This is the error I get:
$ chessx
libpng warning: iCCP: known incorrect sRGB profile
qt.qpa.wayland: Failed to load client buffer integration: "wayland-egl"
qt.qpa.wayland: Available client buffer integrations: ()qt.qpa.wayland: No
shell integration named "xdg-shell" found
qt.qpa.wayland: No shell integration named "xdg-shell-v6" foundqt.qpa.wayland:
No shell integration named "wl-shell" found
qt.qpa.wayland: No shell integration named "ivi-shell" found
qt.qpa.wayland: Loading shell integration failed.
qt.qpa.wayland: Attempted to load the following shells ("xdg-shell", "xdg-
shell-v6", "wl-shell", "ivi-shell")
-- System Information:
Debian Release: bullseye/sid
APT prefers unstable-debug
APT policy: (500, 'unstable-debug'), (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.10.0-4-amd64 (SMP w/2 CPU threads)
Kernel taint flags: TAINT_CRAP
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages chessx depends on:
ii libc62.31-9
ii libgcc-s1 [libgcc1] 10.2.1-6
ii libqt5core5a 5.15.2+dfsg-5
ii libqt5gui5 5.15.2+dfsg-5
ii libqt5multimedia55.15.2-3
ii libqt5network5 5.15.2+dfsg-5
ii libqt5printsupport5 5.15.2+dfsg-5
ii libqt5svg5 5.15.2-2
ii libqt5widgets5 5.15.2+dfsg-5
ii libqt5xml5 5.15.2+dfsg-5
ii libstdc++6 10.2.1-6
ii zlib1g 1:1.2.11.dfsg-2
Versions of packages chessx recommends:
ii stockfish 12-2
chessx suggests no packages.
Bug#983873: retroarch: Menu freezes shortly after start
Are you using sway as compositor? I reproduced the freezing behaviour when running under sway. In a GNOME session on Wayland, retroarch seems to work fine. Yes, I'm using Sway. The message "Failed to create shell" helped me find what I think is the corresponding upstream issue: https://github.com/libretro/RetroArch/issues/7064 It's unfortunate that retroarch wasn't updated for bullseye, but I'm not sure trying to backport the xdg-shell feature to this version of retroarch is a good idea now that bullseye is in hard freeze. I notice a similar bug in other packages in Debian Sid, such as ChessX. Would it make sense to report a bug with each of those packages, or would this be considered an issue with Sway / wlroots / xdg-shell? OpenPGP_0x3A57CE276008178F.asc Description: application/pgp-keys OpenPGP_signature Description: OpenPGP digital signature
Bug#983873: retroarch: Menu freezes shortly after start
I'm using X11 (not Wayland) The issue happens on Wayland. On X11 the RetroArch menu works (although some of the menu icons are black squares and a few other glitches). If the 1.9.0 you tested was the flatpak, I wonder whether it's possible for you to also to test a flatpak of 1.7.3, in case there is a relevant difference in the build environment or the libraries used? The oldest available version of RetroArch on Flathub is 1.7.6: $ flatpak update --commit=a437b0ef4eb1f1563d84a8ec881b9f19eb9fb84c06b35ecafe4ce85d5aad918a org.libretro.RetroArch That version does have the menu freeze issue under Wayland which I guess means that the issue has been fixed in upstream. Could you please run it as "retroarch --verbose" and post some or all of the output up to the point where it freezes? $ retroarch --verbose [INFO] RetroArch 1.7.3 (Git b2ceb50) [INFO] === Build === Capabilities: MMX MMXEXT SSE1 SSE2 SSE3 SSSE3 SSE4 SSE4.2 AVX AES Built: Nov 20 2020 [INFO] Version: 1.7.3 [INFO] Git: b2ceb50 [INFO] = [INFO] Environ SET_PIXEL_FORMAT: RGB565. [INFO] Version of libretro API: 1 [INFO] Compiled against API: 1 [INFO] [Audio]: Set audio input rate to: 29970.03 Hz. [INFO] [Video]: Video @ fullscreen [INFO] [Video]: Starting threaded video driver ... [INFO] [Wayland]: Seat name: seat0. [INFO] [Wayland]: Physical width: 380 mm x 210 mm. [INFO] [Wayland]: Video mode: 1600 x 900 @ 60.0830 Hz. [INFO] [Wayland]: Setting buffer scale factor to 1. [ERROR] [Wayland]: Failed to create shell. [INFO] [GLX]: GLX_OML_sync_control and GLX_MESA_swap_control supported, using better swap control method... [INFO] [GL]: Found GL context: x [INFO] [GL]: Detecting screen resolution 1600x900. [INFO] [GLX]: Window manager is wlroots wm. [INFO] [XINERAMA]: Xinerama version: 1.1. [INFO] [XINERAMA]: Xinerama screens: 1. [INFO] [GLX]: Using Xinerama on screen #0. [INFO] [GLX]: X = 0, Y = 0, W = 1600, H = 900. [INFO] [GLX]: Using windowed fullscreen. [INFO] [GLX]: Found swap function: glXSwapIntervalEXT. [INFO] [GLX]: glXSwapIntervalEXT(1) [INFO] [GL]: Vendor: AMD, Renderer: AMD KABINI (DRM 2.50.0, 5.10.0-4-amd64, LLVM 11.0.1). [INFO] [GL]: Version: 4.5 (Compatibility Profile) Mesa 20.3.4. [INFO] [GL]: Using resolution 1600x900 [INFO] [GL]: Default shader backend found: glsl. [INFO] [Shader driver]: Using GLSL shader backend. [INFO] [GLSL]: Checking GLSL shader support ... [WARN] [GL]: Stock GLSL shaders will be used. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] [GLSL]: Found GLSL vertex shader. [INFO] [GLSL]: Found GLSL fragment shader. [INFO] [GLSL]: Linking GLSL program. [INFO] Resetting shader to defaults ... [INFO] [GL]: Using 4 textures. [INFO] [GL]: Loaded 1 program(s). [INFO] [GL]: Using GL_RGB565 for texture uploads. [INFO] [Joypad]: Found joypad driver: "udev". [INFO] [Font]: Using font rendering backend: freetype. [INFO] [Video]: Found display server: x11 [INFO] [SDL audio]: Requested 64 ms latency, got 42 ms [WARN] Audio rate control was desired, but driver does not support needed features. [INFO] [LED]: LED driver = 'null' 0x55cac486caa0 [ERROR] Implementation uses threaded audio. Cannot use rewind.. [INFO] SRAM will not be saved. [INFO] Loading history file: [/home/pelle/.config/retroarch/content_history.lpl]. [INFO] Loading history file: [/home/pelle/.config/retroarch/content_favorites.lpl]. [INFO] Loading history file: [/home/pelle/.config/retroarch/content_music_history.lpl]. [INFO] Loading history file: [/home/pelle/.config/retroarch/content_video_history.lpl]. [INFO] Loading history file: [/home/pelle/.config/retroarch/content_image_history.lpl]. OpenPGP_0x3A57CE276008178F.asc Description: application/pgp-keys OpenPGP_signature Description: OpenPGP digital signature
Bug#984976: mumble: Keyboard shortcuts can't be assigned
Package: mumble Version: 1.3.4-1 Severity: normal Dear Maintainer, In the "Shortcuts" settings, when I add a new shortcut and click in the "Shortcut" column, a "Press Shortcut" label is shown. However, it is not possible to assign a shortcut, regardless of which key is pressed, and the "Press Shortcut" label remains, until I click somewhere else. I expected a key name to be listed in the "Shortcut" column after I pressed the key while the "Press Shortcut" label was visible. This issue may be because I'm running a Wayland compositor (Sway). -- System Information: Debian Release: bullseye/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.10.0-4-amd64 (SMP w/2 CPU threads) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages mumble depends on: ii libasound21.2.4-1.1 ii libavahi-compat-libdnssd1 0.8-5 ii libc6 2.31-9 ii libgcc-s1 10.2.1-6 ii libjack-jackd2-0 [libjack-0.125] 1.9.17~dfsg-1 ii libprotobuf23 3.12.4-1 ii libpulse0 14.2-2 ii libqt5core5a 5.15.2+dfsg-5 ii libqt5dbus5 5.15.2+dfsg-5 ii libqt5gui55.15.2+dfsg-5 ii libqt5network55.15.2+dfsg-5 ii libqt5sql55.15.2+dfsg-5 ii libqt5sql5-sqlite 5.15.2+dfsg-5 ii libqt5svg55.15.2-2 ii libqt5widgets55.15.2+dfsg-5 ii libqt5xml55.15.2+dfsg-5 ii libsndfile1 1.0.31-1 ii libspeechd2 0.10.2-2 ii libspeex1 1.2~rc1.2-1.1 ii libspeexdsp1 1.2~rc1.2-1.1 ii libssl1.1 1.1.1j-1 ii libstdc++610.2.1-6 ii libx11-6 2:1.7.0-2 ii libxi62:1.7.10-1 ii lsb-release 11.1.0 mumble recommends no packages. Versions of packages mumble suggests: pn mumble-server ii speech-dispatcher 0.10.2-2
Bug#984623: pychess: Fails to switch off sound
Package: pychess Version: 1.0.0-1.1 Severity: normal Dear Maintainer, PyChess keeps playing sound effects, even when "Use sounds in PyChess" is unchecked. Additionally the "Use sounds in PyChess checkbox is automatically reenabled every time PyChess is launched. I expect PyChess to not play sounds when "Use sounds in PyChess" is unchecked, and I expect the setting to persist after quitting and relaunching PyChess. -- System Information: Debian Release: bullseye/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.10.0-4-amd64 (SMP w/2 CPU threads) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages pychess depends on: ii gaviotatb0.4-2.1 ii gir1.2-gdkpixbuf-2.0 2.42.2+dfsg-1 ii gir1.2-glib-2.0 1.66.1-1+b1 ii gir1.2-gst-plugins-base-1.0 1.18.3-1 ii gir1.2-gstreamer-1.0 1.18.3-1 ii gir1.2-gtk-3.0 3.24.24-3 ii gir1.2-gtksource-3.0 3.24.11-2 ii gir1.2-pango-1.0 1.46.2-3 ii gir1.2-rsvg-2.0 2.50.3+dfsg-1 ii gnome-icon-theme 3.12.0-3 ii gobject-introspection1.66.1-1+b1 ii libgaviotatb10.4-2.1 ii python3 3.9.2-2 ii python3-cairo1.16.2-4+b2 ii python3-gi 3.38.0-2 ii python3-gi-cairo 3.38.0-2 ii python3-websockets 8.1-1 pychess recommends no packages. pychess suggests no packages.
Bug#981005: closed by Debian FTP Masters (reply to Salvatore Bonaccorso ) (Bug#981005: fixed in linux 5.10.19-1)
I can confirm this bug is fixed in 5.10.0-4. Thank you so much! OpenPGP_0x3A57CE276008178F.asc Description: application/pgp-keys OpenPGP_signature Description: OpenPGP digital signature
Bug#983917: gnome-weather: Fails to get forecast data
Package: gnome-weather Version: 3.36.1-1 Severity: grave Justification: renders package unusable Dear Maintainer, Gnome Weather fails to get forecast data. After entering a location the app shows the message: "Forecast data not available" This happens with every location tried: New York, New York, United States of America; London, Greater London, United Kingdom; and others. This is the terminal output: ``` $ gnome-weather GWeather-Message: 11:51:16.849: Failed to get Yr.no forecast data: 404 Not Found GWeather-Message: 11:51:16.862: Failed to get Yr.no forecast data: 404 Not Found ``` -- System Information: Debian Release: bullseye/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.10.0-3-amd64 (SMP w/2 CPU threads) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages gnome-weather depends on: ii dconf-gsettings-backend [gsettings-backend] 0.38.0-2 ii geoclue-2.0 2.5.7-2 ii gir1.2-gdkpixbuf-2.0 2.42.2+dfsg-1 ii gir1.2-geoclue-2.0 2.5.7-2 ii gir1.2-geocodeglib-1.0 3.26.2-2 ii gir1.2-glib-2.0 1.66.1-1+b1 ii gir1.2-gnomedesktop-3.0 3.38.4-1 ii gir1.2-gtk-3.0 3.24.24-3 ii gir1.2-gweather-3.0 3.36.1-1 ii gjs 1.66.2-1 ii libglib2.0-bin 2.66.7-1 gnome-weather recommends no packages. gnome-weather suggests no packages.
Bug#983873: retroarch: Menu freezes shortly after start
Package: retroarch Version: 1.7.3+dfsg1-1.1+b2 Severity: grave Justification: renders package unusable Dear Maintainer, When launching RetroArch, the menu freezes up instantly or after a couple of seconds. A work-around is to change the settings in .config/retroarch/retroarch.cfg menu_driver = "rgui" video_driver = "sdl2" The issue appears to be resolved in v1.9.0 which is the version currently available as flatpak. -- System Information: Debian Release: bullseye/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.10.0-3-amd64 (SMP w/2 CPU threads) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages retroarch depends on: ii fonts-dejavu-core 2.37-2 ii libasound21.2.4-1.1 ii libavcodec58 7:4.3.2-0+deb11u1 ii libavformat58 7:4.3.2-0+deb11u1 ii libavutil56 7:4.3.2-0+deb11u1 ii libc6 2.31-9 ii libdrm2 2.4.104-1 ii libegl1 1.3.2-1 ii libfreetype6 2.10.4+dfsg-1 ii libgbm1 20.3.4-1 ii libgcc-s1 10.2.1-6 ii libgl11.3.2-1 ii libjack-jackd2-0 [libjack-0.125] 1.9.17~dfsg-1 ii libminiupnpc172.2.1-1 ii libopenal11:1.19.1-2 ii libpulse0 14.2-2 ii libqt5core5a 5.15.2+dfsg-5 ii libqt5gui55.15.2+dfsg-5 ii libqt5widgets55.15.2+dfsg-5 ii libretro-core-info1.3.6+git20160816-1 ii libsdl2-2.0-0 2.0.14+dfsg2-3 ii libstdc++610.2.1-6 ii libswresample37:4.3.2-0+deb11u1 ii libswscale5 7:4.3.2-0+deb11u1 ii libudev1 247.3-1 ii libusb-1.0-0 2:1.0.24-2 ii libv4l-0 1.20.0-2 ii libwayland-client01.18.0-2~exp1.1 ii libwayland-cursor01.18.0-2~exp1.1 ii libwayland-egl1 1.18.0-2~exp1.1 ii libx11-6 2:1.7.0-2 ii libxext6 2:1.3.3-1.1 ii libxinerama1 2:1.1.4-2 ii libxkbcommon0 1.0.3-2 ii libxv12:1.0.11-1 ii libxxf86vm1 1:1.1.4-1+b2 ii retroarch-assets 1.3.6+git20160731+dfsg1-2 ii zlib1g1:1.2.11.dfsg-2 retroarch recommends no packages. retroarch suggests no packages.
Bug#981278: subdownloader: Crashes when trying to download subtitle
Package: subdownloader Version: 2.1.0-3 Severity: grave Justification: renders package unusable Dear Maintainer, When Subdownloader starts, there's a dialog: > Error logging in into [sic] the server. Please try again later. After pressing OK, then going to the Search by Movie Name tab, searching for any film (like Plan 9 from Outer Space but it happens with any film), selecting the [English (US)] subtitle, right clicking on the listing and choosing Download and then finally clicking on the Choose button causes Subdownloader to crash with the following error in the terminal: ``` Traceback (most recent call last): File "/usr/lib/python3/dist- packages/subdownloader/client/gui/widgets/searchNameWidget.py", line 181, in onButtonDownloadByTitle data_stream = sub.download(provider_instance=self.get_state().get_OSDBServer(), callback=callback) File "/usr/lib/python3/dist-packages/subdownloader/provider/SDService.py", line 682, in download return BytesIO(subs[0]) TypeError: 'NoneType' object is not subscriptable ``` -- System Information: Debian Release: bullseye/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.10.0-2-amd64 (SMP w/2 CPU threads) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages subdownloader depends on: ii python3 3.9.1-1 ii python3-argcomplete 1.8.1-1.3 ii python3-langdetect 1.0.7-4 ii python3-progressbar 2.5-2 ii python3-pymediainfo 4.2.1-1 Versions of packages subdownloader recommends: ii python3-pyqt5 5.15.2+dfsg-3 subdownloader suggests no packages. -- no debconf information
Bug#981272:
This crash happens when the fonts-aenigma package is installed. Without fonts-aenigma installed, the font family drop-down arrow works. OpenPGP_0x3A57CE276008178F.asc Description: application/pgp-keys OpenPGP_signature Description: OpenPGP digital signature
Bug#815539: typecatcher fails to start
Package: typecatcher
Version: 0.3-1.2
Followup-For: Bug #815539
Dear Maintainer,
Typecatcher fails to start. This is the error shown in the terminal:
```
$ typecatcher
Traceback (most recent call last):
File "/usr/lib/python3/dist-packages/typecatcher_lib/Application.py", line
30, in on_activate
self.window = TypeCatcherWindow.TypeCatcherWindow()
File "/usr/lib/python3/dist-packages/typecatcher_lib/Window.py", line 47, in
__new__
builder = get_builder('TypeCatcherWindow')
File "/usr/lib/python3/dist-packages/typecatcher_lib/helpers.py", line 44, in
get_builder
builder.add_from_file(ui_filename)
File "/usr/lib/python3/dist-packages/typecatcher_lib/Builder.py", line 86, in
add_from_file
ele_widgets = tree.getiterator("object")
AttributeError: 'ElementTree' object has no attribute 'getiterator'
```
-- System Information:
Debian Release: bullseye/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 5.10.0-2-amd64 (SMP w/2 CPU threads)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8),
LANGUAGE=en_US:en
Shell: /bin/sh linked to /usr/bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages typecatcher depends on:
ii gir1.2-glib-2.0 1.66.1-1+b1
ii gir1.2-gtk-3.0 3.24.24-1
ii gir1.2-webkit2-4.0 2.30.4-1
ii python3 3.9.1-1
ii python3-gi 3.38.0-1+b2
Versions of packages typecatcher recommends:
ii yelp 3.38.2-1
typecatcher suggests no packages.
-- no debconf information
Bug#981272: inkscape: Freeze and crash when clicking on font family selector drop-down arrow
Package: inkscape Version: 1.0.2-3 Severity: normal Dear Maintainer, When I open Inkscape, click on the text object tool and then click on the drop- down arrow at the right of the font family selector, then Inkscape freezes for half a minute and the window disappears, leaving this message in the terminal: ``` Gdk-Message: 16:39:30.465: Error 71 (Protocol error) dispatching to Wayland display. ``` This happens every time that drop-down arrow is clicked. The font family field itself works fine. It's only the drop-down arrow that crashes the application. -- System Information: Debian Release: bullseye/sid APT prefers unstable APT policy: (500, 'unstable'), (1, 'experimental') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 5.10.0-2-amd64 (SMP w/2 CPU threads) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_US:en Shell: /bin/sh linked to /usr/bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages inkscape depends on: ii libatkmm-1.6-1v5 2.28.0-3 ii libc6 2.31-9 ii libcairo2 1.16.0-5 ii libcairomm-1.0-1v5 1.12.2-4 ii libcdr-0.1-1 0.1.6-2 ii libdbus-glib-1-2 0.110-6 ii libdouble-conversion3 3.1.5-6.1 ii libfontconfig1 2.13.1-4.2 ii libfreetype6 2.10.4+dfsg-1 ii libgc1 1:8.0.4-3 ii libgcc-s1 10.2.1-6 ii libgdk-pixbuf-2.0-02.42.2+dfsg-1 ii libgdl-3-5 3.34.0-1 ii libglib2.0-0 2.66.4-2 ii libglibmm-2.4-1v5 2.64.2-2 ii libgomp1 10.2.1-6 ii libgsl25 2.6+dfsg-2 ii libgtk-3-0 3.24.24-1 ii libgtkmm-3.0-1v5 3.24.2-2 ii libgtkspell3-3-0 3.0.10-1 ii libharfbuzz0b 2.7.4-1 ii libjpeg62-turbo1:2.0.5-2 ii liblcms2-2 2.12~rc1-2 ii libmagick++-6.q16-88:6.9.11.58+dfsg-1 ii libpango-1.0-0 1.46.2-3 ii libpangocairo-1.0-01.46.2-3 ii libpangoft2-1.0-0 1.46.2-3 ii libpangomm-1.4-1v5 2.42.1-1 ii libpng16-161.6.37-3 ii libpoppler-glib8 20.09.0-3.1 ii libpoppler102 20.09.0-3.1 ii libpotrace01.16-2 ii librevenge-0.0-0 0.0.4-6+b1 ii librsvg2-common2.50.2+dfsg-1 ii libsigc++-2.0-0v5 2.10.4-2 ii libsoup2.4-1 2.72.0-2 ii libstdc++6 10.2.1-6 ii libvisio-0.1-1 0.1.7-1+b1 ii libwpg-0.3-3 0.3.3-1 ii libx11-6 2:1.7.0-2 ii libxml22.9.10+dfsg-6.3+b1 ii libxslt1.1 1.1.34-4 ii python33.9.1-1 ii zlib1g 1:1.2.11.dfsg-2 Versions of packages inkscape recommends: ii aspell 0.60.8-2 ii fig2dev 1:3.2.8-1 ii imagemagick 8:6.9.11.58+dfsg-1 ii imagemagick-6.q16 [imagemagick] 8:6.9.11.58+dfsg-1 ii libimage-magick-perl 8:6.9.11.58+dfsg-1 ii libwmf-bin 0.2.8.4-17 ii python3-lxml 4.6.2-1 ii python3-numpy1:1.19.5-1 ii python3-scour0.38.2-1 Versions of packages inkscape suggests: pn dia pn inkscape-tutorials pn libsvg-perl pn libxml-xql-perl pn pstoedit pn python3-uniconvertor ii ruby 1:2.7+2 -- no debconf information
Bug#981005: linux-image-5.10.0-2-amd64: Bluetooth stopped working
Relevant part of 5.10.0 dmesg: [20164.000149] ata1.00: configured for UDMA/100 [20164.084110] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [20164.167454] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [20164.188123] usb 4-4: new full-speed USB device number 8 using ohci-pci [20164.382093] usb 4-4: New USB device found, idVendor=0930, idProduct=0220, bcdDevice= 0.01 [20164.382103] usb 4-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [20164.390243] usb 4-4: firmware: direct-loading firmware ar3k/AthrBT_0x3101.dfu [20164.429414] PM: suspend exit [20164.455974] usb 4-4: firmware: direct-loading firmware ar3k/ramps_0x3101_40.dfu [20164.466587] usb 4-4: USB disconnect, device number 8 [20165.036680] usb 4-4: new full-speed USB device number 9 using ohci-pci [20167.982738] wlp5s0: authenticate with 74:da:88:a9:c6:a6 [20168.014007] wlp5s0: send auth to 74:da:88:a9:c6:a6 (try 1/3) [20168.017540] wlp5s0: authenticated [20168.028507] wlp5s0: associate with 74:da:88:a9:c6:a6 (try 1/3) [20168.037597] wlp5s0: RX AssocResp from 74:da:88:a9:c6:a6 (capab=0x411 status=0 aid=2) [20168.037768] wlp5s0: associated [20168.054940] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready [20170.260959] usb 4-4: New USB device found, idVendor=0930, idProduct=0220, bcdDevice= 0.02 [20170.260970] usb 4-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [20170.264703] Bluetooth: hci0: don't support firmware rome 0x3101 [20171.105831] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [20171.117913] Lockdown: systemd-logind: hibernation is restricted; see man kernel_lockdown.7 [20171.802265] wlp5s0: AP 74:da:88:a9:c6:a6 changed bandwidth, new config is 2417.000 MHz, width 1 (2417.000/0 MHz)
Bug#981005: linux-image-5.10.0-2-amd64: Bluetooth stopped working
Package: src:linux Version: 5.10.9-1 Severity: critical Justification: breaks unrelated software Dear Maintainer, After upgrading to Linux 5.10, Bluetooth no longer works. Bluetooth adapter still shows up in rfkill: ``` $ rfkill ID TYPE DEVICE SOFT HARD 0 bluetooth Toshiba Bluetooth unblocked unblocked 1 wlan phy0 unblocked unblocked 2 bluetooth hci0 unblocked unblocked ``` But the Bluetooth managers can no longer find the adapter: ``` $ blueman-manager blueman-manager version 2.1.4 starting blueman-manager 14.52.26 ERRORManager:118 on_dbus_name_appeared: Default adapter not found, trying first available. blueman-manager 14.52.26 ERRORManager:122 on_dbus_name_appeared: No adapter(s) found, exiting ``` When booting from Linux 5.9, Bluetooth works fine. During start-up with Linux 5.10, there's an error message about Bluetooth firmware. -- Package-specific info: ** Kernel log: boot messages should be attached ** Model information sys_vendor: TOSHIBA product_name: SATELLITE C70D-A product_version: PSCENE-00S001N5 chassis_vendor: OEM Chassis Manufacturer chassis_version: OEM Chassis Version bios_vendor: Insyde Corp. bios_version: 1.20 board_vendor: AMD board_name: Larne board_version: Base Board Version ** Network interface configuration: *** /etc/network/interfaces: source /etc/network/interfaces.d/* auto lo iface lo inet loopback ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Root Complex [1022:1536] Subsystem: Toshiba Corporation Family 16h Processor Root Complex [1179:fa85] Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- Kernel driver in use: radeon Kernel modules: radeon, amdgpu 00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio [1002:9840] Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio [1002:9840] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: snd_hda_intel Kernel modules: snd_hda_intel 00:02.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Function 0 [1022:1538] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport 00:02.3 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1 [1022:1439] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- TAbort- Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: Kernel driver in use: pcieport 00:10.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller [1022:7814] (rev 01) (prog-if 30 [XHCI]) Subsystem: Toshiba Corporation FCH USB XHCI Controller [1179:fa85] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- SERR- Kernel driver in use: xhci_hcd Kernel modules: xhci_pci 00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] [1022:7801] (prog-if 01 [AHCI 1.0]) Subsystem: Toshiba Corporation FCH SATA Controller [AHCI mode] [1179:fa85] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- Kernel driver in use: ahci Kernel modules: ahci 00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller [1022:7807] (rev 39) (prog-if 10 [OHCI]) Subsystem: Toshiba Corporation FCH USB OHCI Controller [1179:fa85] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- Kernel driver in use: ehci-pci Kernel modules: ehci_pci 00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller [1022:7807] (rev 39) (prog-if 10 [OHCI]) Subsystem: Toshiba Corporation FCH USB OHCI Controller [1179:fa85] Control: I/O+
Bug#970485: ITP: loadem -- Command line tool for emulating web load from thousands of clients.
Package: wnpp Severity: wishlist Owner: pelle.john...@gmail.com * Package name: loadem Version : 0.2.2 Upstream Author : Pelle Johnsen * URL : https://github.com/pjoe/loadem * License : Apache-2.0 Programming Lang: Rust Description : Command line tool for emulating web load from thousands of clients. Aims to be easy to use and providing near real-time performance measurements of the application under test. This is particulary useful when you are doing optimization as you can see the impact of your changes almost immediately. Somewhat similar to siege, but implemented in Rust for great performance and maintainablility. Also more focus on real-time feedback. Developed on GitHub with CI building xplatform for windows/linux/mac.
Bug#894313: etherape: Crashes on startup
Package: etherape Version: 0.9.16-1 Severity: grave Justification: renders package unusable Dear Maintainer, I'm trying to start etherape, but it crashes with this error: % etherape (etherape:32196): libglade-WARNING **: Could not load support for `gnome': libgnome.so: cannot open shared object file: No such file or directory (etherape:32196): libglade-WARNING **: unknown widget class 'GnomeCanvas' (etherape:32196): Gtk-WARNING **: gtk_scrolled_window_add(): cannot add non scrollable widget use gtk_scrolled_window_add_with_viewport() instead EtherApe-INFO: sctp protocol not supported EtherApe-INFO: ddp protocol not supported EtherApe-INFO: ddp protocol not supported EtherApe-INFO: ddp protocol not supported EtherApe-INFO: ddp protocol not supported (etherape:32196): GLib-GObject-WARNING **: invalid cast from 'GtkLabel' to 'GnomeCanvas' (etherape:32196): GnomeCanvas-CRITICAL **: gnome_canvas_root: assertion 'GNOME_IS_CANVAS (canvas)' failed (etherape:32196): GnomeCanvas-CRITICAL **: gnome_canvas_item_new: assertion 'GNOME_IS_CANVAS_GROUP (parent)' failed ** ERROR:diagram.c:250:addref_canvas_obj: assertion failed: (obj) zsh: abort etherape % unexpected EOF in read_all() critical: read_all() failed on control socket -- System Information: Debian Release: buster/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 4.15.0-1-686-pae (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages etherape depends on: ii etherape-data0.9.16-1 ii libart-2.0-2 2.3.21-3 ii libatk1.0-0 2.26.1-3 ii libc-ares2 1.14.0-1 ii libc62.27-1 ii libcairo21.15.10-2 ii libfontconfig1 2.12.6-0.1 ii libfreetype6 2.8.1-2 ii libgdk-pixbuf2.0-0 2.36.11-1 ii libglade2-0 1:2.6.4-2+b1 ii libglib2.0-0 2.54.3-2 ii libgnomecanvas2-02.30.3-3 ii libgtk2.0-0 2.24.32-1 ii libpango-1.0-0 1.40.14-1 ii libpangocairo-1.0-0 1.40.14-1 ii libpangoft2-1.0-01.40.14-1 ii libpcap0.8 1.8.1-6 ii libpopt0 1.16-10+b2 ii libxml2 2.9.4+dfsg1-6.1 etherape recommends no packages. etherape suggests no packages. -- no debconf information
Bug#891879: closed by Jeremy Bicha (Bug#891879: fixed in gnome-chess 1:3.28.0-2)
Hi maintainer, I'm not sure this bug has been resolved yet. When I search for gnome-chess with apt, it is described as having 3D graphics: % apt search gnome-chess Sorting... Done Full Text Search... Done gnome-chess/unstable,now 1:3.28.0-1 i386 [installed] chess game with 3D graphics However, the most recent version does not have 3D graphics. Perhaps the package description could be changed to not mention 3D graphics (or 3D graphics could be implemented)? -- Pelle Hjek h...@member.fsf.org On Sun, Mar 25, 2018 at 12:06:05AM +, Debian Bug Tracking System wrote: > This is an automatic notification regarding your Bug report > which was filed against the gnome-chess package: > > #891879: gnome-chess: No 3D graphics > > It has been closed by Jeremy Bicha . > > Their explanation is attached below along with your original report. > If this explanation is unsatisfactory and you have not received a > better one in a separate message then please contact Jeremy Bicha > by > replying to this email. > > > -- > 891879: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=891879 > Debian Bug Tracking System > Contact ow...@bugs.debian.org with problems > Date: Sun, 25 Mar 2018 00:04:23 + > From: Jeremy Bicha > To: 891879-cl...@bugs.debian.org > Subject: Bug#891879: fixed in gnome-chess 1:3.28.0-2 > > Source: gnome-chess > Source-Version: 1:3.28.0-2 > > We believe that the bug you reported is fixed in the latest version of > gnome-chess, which is due to be installed in the Debian FTP archive. > > A summary of the changes between this version and the previous one is > attached. > > Thank you for reporting the bug, which will now be closed. If you > have further comments please address them to 891...@bugs.debian.org, > and the maintainer will reopen the bug report if appropriate. > > Debian distribution maintenance software > pp. > Jeremy Bicha (supplier of updated gnome-chess package) > > (This message was generated automatically at their request; if you > believe that there is a problem with it please contact the archive > administrators by mailing ftpmas...@ftp-master.debian.org) > > > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA512 > > Format: 1.8 > Date: Sat, 24 Mar 2018 19:12:34 -0400 > Source: gnome-chess > Binary: gnome-chess > Architecture: source > Version: 1:3.28.0-2 > Distribution: unstable > Urgency: medium > Maintainer: Debian GNOME Maintainers > > Changed-By: Jeremy Bicha > Description: > gnome-chess - simple chess game > Closes: 891879 > Changes: > gnome-chess (1:3.28.0-2) unstable; urgency=medium > . >[ Anders Jonsson ] >* Remove 3D from description (Closes: #891879) > . >[ Jeremy Bicha ] >* Add libchess-should-be-a-static-convenience-library.patch: > - Cherry-pick patch to avoid providing a shared library > Checksums-Sha1: > 31fa828f00fcde7e13d94ae5e602aebf928b8190 2150 gnome-chess_3.28.0-2.dsc > e96f9e6547e4ea139718eab0a0ce30fd065cd8a9 22000 > gnome-chess_3.28.0-2.debian.tar.xz > 249ecb3cff37bd31188af02e405c068b5dbf5d1c 16386 > gnome-chess_3.28.0-2_source.buildinfo > Checksums-Sha256: > 8f4756505a05af5ecb5b99e3dd15c20888695689230a69a222ce9e8d8216f1ed 2150 > gnome-chess_3.28.0-2.dsc > 2b46253ee427acba2308be1c38fc00e72dae197b4779c1ac3901ad33908c4d49 22000 > gnome-chess_3.28.0-2.debian.tar.xz > 55e13baf114ce3597b3eddb8ad129e4ae7e914a9e4ba5682e5b32bf0284614b5 16386 > gnome-chess_3.28.0-2_source.buildinfo > Files: > 942745d0e67252278a16a8fe2d755dcb 2150 games optional gnome-chess_3.28.0-2.dsc > c8048e62e088106a96c91ccf1d6763a2 22000 games optional > gnome-chess_3.28.0-2.debian.tar.xz > a9fceaccd250a87f44f0b8576e904fae 16386 games optional > gnome-chess_3.28.0-2_source.buildinfo > > -BEGIN PGP SIGNATURE- > > iQIzBAEBCgAdFiEETQvhLw5HdtiqzpaW5mx3Wuv+bH0FAlq24lEACgkQ5mx3Wuv+ > bH3z1Q//czcm7Kb4T4Q4ooxkb7XTTp6qhmpB8qQvAwAa7BBthy5Oa6J5dLk89qzL > OWKa1NkorIED32Jn5gMpxRqg/aZrNa6DVGCgStkzQYJIMdzQjRu2nzeMY5TTOEGj > by2CfH9T6X89p/B/5EszHrweh6luvJ4hS8xXzewBI2Pu62OkMy6ChRH6kKRgHTZW > 2K6fs3U3EImu3UQ0UuXZKGPpNT8LQEgeD6QZzo8h2gXJNmRHBhvl3oxyNI4uuIZU > N0LndyBFvVimT5phofJ/ih7MidLp6MSY/qOrwmna/WZtbDCXckEJ2Y2e2z7JSR+p > yxU3NeSnkz+wFhUYqirMrCOy0Ee8DkdufcyyK2HgAbHguiPjNFSQDLSK+DKgu+Fk > OsTni+WtqvWGjEyMr0gW5zmjHpz78qQJpVaFaWEVWzx52zJj8jyexHp6PuXBoFVN > gxgaglEcO3kBOwhg5LnbjdJeKNgi9HVH0urZxcdmTnrXWaPGHNaSra/ZcPJXC2PO > XyFccZo7TqsVnQyCDfxZj4Ty7k3U+zUObSweA5xWUlVzAoK9Rw4Drtzvk0iKtmWW > MOI6dZT0quZI2FnhOmONr0zjk22wfcCaQgfKcd34nEvO7tVYvGuMelPdkAGjHS4J > DVSAvACcnXKGEXuhTeR81ZhIb3bhErGGfBBtzH36g1W+54+mR6s= > =OMlV > -END PGP SIGNATURE- > Date: Fri, 02 Mar 2018 00:13:51 + > From: P
Bug#893907: lynx: The subdomain name 'news' freezes Lynx
Package: lynx Version: 2.8.9dev16-3 Severity: important Dear Maintainer, When I use Lynx to read a web page, it freezes when the web page starts with the subdomain 'news.' For example, on the terminal when I type in this: lynx news.ycombinator.com Then Lynx freezes while displaying this message in the status bar: Making NNTP connection to news.ycombinator.com Lynx handles https://news.ycombinator.com just fine, but when https:// is missing, Lynx just assumes that I'm looking for something one Usenet. Same problem with news.google.com, news.yahoo.com, etc. I think it would be more reasonable if Lynx assumed HTTP unless told otherwise, or perhaps had a time out in case NNTP lookup failed. Freezing indefinitely is not the best option in that case. -- System Information: Debian Release: buster/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 4.15.0-1-686-pae (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages lynx depends on: ii libbsd0 0.8.7-1 ii libbz2-1.01.0.6-8.1 ii libc6 2.27-1 ii libgnutls30 3.5.18-1 ii libidn11 1.33-2.1 ii libncursesw5 6.1-1 ii libtinfo5 6.1-1 ii lynx-common 2.8.9dev16-3 ii zlib1g1:1.2.8.dfsg-5 Versions of packages lynx recommends: ii mime-support 3.60 lynx suggests no packages. -- no debconf information
Bug#892871: tome: Segfaults when started
Package: tome Version: 2.4~0.git.2015.12.29-1.2 Severity: grave Justification: renders package unusable Dear Maintainer, Starting Tome gives me this error: % tome ASAN:DEADLYSIGNAL = ==28204==ERROR: AddressSanitizer: SEGV on unknown address 0xb7eede70 (pc 0xb7eede84 bp 0xb7a89320 sp 0xbfaabf4c T16777215) ==28204==The signal is caused by a WRITE memory access. #0 0xb7eede83 in _dl_get_tls_static_info (/lib/ld-linux.so.2+0x11e83) #1 0xb79f7ff9 (/usr/lib/i386-linux-gnu/libasan.so.4+0x101ff9) #2 0xb79e3f15 (/usr/lib/i386-linux-gnu/libasan.so.4+0xedf15) #3 0xb7eeb91a (/lib/ld-linux.so.2+0xf91a) #4 0xb7edccb9 (/lib/ld-linux.so.2+0xcb9) AddressSanitizer can not provide additional info. SUMMARY: AddressSanitizer: SEGV (/lib/ld-linux.so.2+0x11e83) in _dl_get_tls_static_info ==28204==ABORTING -- System Information: Debian Release: buster/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Kernel: Linux 4.15.0-1-686-pae (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages tome depends on: ii libasan4 7.3.0-5 ii libboost-filesystem1.62.0 1.62.0+dfsg-5 ii libboost-system1.62.0 1.62.0+dfsg-5 ii libc6 2.27-1 ii libgcc11:8-20180218-1 ii libjansson42.11-1 ii libncurses56.1-1 ii libsdl-image1.21.2.12-8 ii libsdl-ttf2.0-02.0.11-4 ii libsdl1.2debian1.2.15+dfsg2-0.1 ii libstdc++6 8-20180218-1 ii libtinfo5 6.1-1 ii libubsan0 7.3.0-5 ii libx11-6 2:1.6.4-3 ii libxext6 2:1.3.3-1+b2 tome recommends no packages. tome suggests no packages. -- no debconf information
Bug#892210: marble-qt: Bookmark editing broken
Package: marble-qt Version: 4:17.08.3-3 Severity: normal Dear Maintainer, Bookmark editing is broken. In the top menu, I click Bookmarks -> Manage Boomarks -> Default (in the Bookmarks column) -> Edit. When I click Edit, nothing happens. I expected to see a menu, where I would be able to modify or remove bookmarks. -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 4.14.0-3-686-pae (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages marble-qt depends on: ii libc6 2.26-6 ii libgcc1 1:8-20180218-1 ii libmarblewidget-qt5-28 4:17.08.3-3 ii libqt5core5a5.9.2+dfsg-12 ii libqt5dbus5 5.9.2+dfsg-12 ii libqt5gui5 5.9.2+dfsg-12 ii libqt5network5 5.9.2+dfsg-12 ii libqt5printsupport5 5.9.2+dfsg-12 ii libqt5widgets5 5.9.2+dfsg-12 ii libstdc++6 8-20180218-1 marble-qt recommends no packages. marble-qt suggests no packages. -- no debconf information
Bug#892209: mc should allow rubbish bin
Package: mc Version: 3:4.8.19-1 Severity: wishlist Dear Maintainer, mc should allow putting files in the rubbish bin, like most other file managers, to prevent accidental deletions. trash-cli on the command line implements this functionality, so it might be trivial to add to mc. -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 4.14.0-3-686-pae (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages mc depends on: ii e2fslibs 1.43.9-2 ii libc6 2.26-6 ii libglib2.0-0 2.54.3-2 ii libgpm2 1.20.7-5 ii libslang2 2.3.1a-3 ii libssh2-1 1.8.0-1 ii mc-data 3:4.8.19-1 Versions of packages mc recommends: ii mime-support 3.60 ii perl 5.26.1-5 ii unzip 6.0-21 Versions of packages mc suggests: ii arj 3.10.22-17 ii bzip21.0.6-8.1 pn dbview pn djvulibre-bin ii evince [pdf-viewer] 3.26.0-3 ii file 1:5.32-2 ii genisoimage 9:1.1.11-3+b2 pn gv ii imagemagick 8:6.9.9.34+dfsg-3 ii imagemagick-6.q16 [imagemagick] 8:6.9.9.34+dfsg-3 pn libaspell-dev ii lynx 2.8.9dev16-3 ii odt2txt 0.5-1+b2 ii poppler-utils0.61.1-2 ii python 2.7.14-4 pn python-boto pn python-tz ii texlive-binaries 2017.20170613.44572-8+b1 ii zip 3.0-11+b1 -- no debconf information
Bug#892207: blender: fails to start
Package: blender Version: 2.79+dfsg0-3+b2 Severity: grave Justification: renders package unusable Dear Maintainer, After upgrading to Buster, Blender fails to start, and reports this message: ``` Error! Blender requires OpenGL 2.1 to run. Try updating your drivers. ``` Blender worked fine just before in Stretch on the same computer. Here is the output of `glxinfo`: ``` name of display: :0 display: :0 screen: 0 direct rendering: Yes server glx vendor string: SGI server glx version string: 1.4 server glx extensions: GLX_ARB_create_context, GLX_ARB_create_context_profile, GLX_ARB_fbconfig_float, GLX_ARB_framebuffer_sRGB, GLX_ARB_multisample, GLX_EXT_create_context_es2_profile, GLX_EXT_create_context_es_profile, GLX_EXT_fbconfig_packed_float, GLX_EXT_framebuffer_sRGB, GLX_EXT_import_context, GLX_EXT_libglvnd, GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_INTEL_swap_event, GLX_MESA_copy_sub_buffer, GLX_OML_swap_method, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_SGI_make_current_read, GLX_SGI_swap_control client glx vendor string: Mesa Project and SGI client glx version string: 1.4 client glx extensions: GLX_ARB_create_context, GLX_ARB_create_context_profile, GLX_ARB_create_context_robustness, GLX_ARB_fbconfig_float, GLX_ARB_framebuffer_sRGB, GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_buffer_age, GLX_EXT_create_context_es2_profile, GLX_EXT_create_context_es_profile, GLX_EXT_fbconfig_packed_float, GLX_EXT_framebuffer_sRGB, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_INTEL_swap_event, GLX_MESA_copy_sub_buffer, GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer, GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync GLX version: 1.4 GLX extensions: GLX_ARB_create_context, GLX_ARB_create_context_profile, GLX_ARB_fbconfig_float, GLX_ARB_framebuffer_sRGB, GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_create_context_es2_profile, GLX_EXT_create_context_es_profile, GLX_EXT_fbconfig_packed_float, GLX_EXT_framebuffer_sRGB, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_INTEL_swap_event, GLX_MESA_copy_sub_buffer, GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer, GLX_MESA_swap_control, GLX_OML_swap_method, GLX_OML_sync_control, GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, GLX_SGIX_visual_select_group, GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync Extended renderer info (GLX_MESA_query_renderer): Vendor: Intel Open Source Technology Center (0x8086) Device: Mesa DRI Intel(R) 945GME x86/MMX/SSE2 (0x27ae) Version: 17.3.6 Accelerated: yes Video memory: 192MB Unified memory: yes Preferred profile: compat (0x2) Max core profile version: 0.0 Max compat profile version: 1.4 Max GLES1 profile version: 1.1 Max GLES[23] profile version: 2.0 OpenGL vendor string: Intel Open Source Technology Center OpenGL renderer string: Mesa DRI Intel(R) 945GME x86/MMX/SSE2 OpenGL version string: 1.4 Mesa 17.3.6 OpenGL extensions: GL_3DFX_texture_compression_FXT1, GL_AMD_shader_trinary_minmax, GL_ANGLE_texture_compression_dxt3, GL_ANGLE_texture_compression_dxt5, GL_APPLE_object_purgeable, GL_APPLE_packed_pixels, GL_ARB_ES2_compatibility, GL_ARB_clear_buffer_object, GL_ARB_compressed_texture_pixel_storage, GL_ARB_copy_buffer, GL_ARB_debug_output, GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_draw_elements_base_vertex, GL_ARB_explicit_attrib_location, GL_ARB_explicit_uniform_location, GL_ARB_fragment_program, GL_ARB_fragment_shader, GL_ARB_framebuffer_object, GL_ARB_get_program_binary, GL_ARB_get_texture_sub_image, GL_ARB_half_float_pixel, GL_ARB_internalformat_query, GL_ARB_invalidate_subdata, GL_ARB_map_buffer_alignment, GL_ARB_map_buffer_range, GL_ARB_multi_bind, GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_pixel_buffer_object, GL_ARB_point_parameters, GL_ARB_point_sprite, GL_ARB_program_interface_query, GL_ARB_provoking_vertex, GL_ARB_robustness, GL_ARB_sampler_objects, GL_ARB_separate_shader_objects, GL_ARB_shader_objects, GL_ARB_shading_language_100, GL_ARB_shadow, GL_ARB_sync, GL_ARB_texture_border_clamp, GL_ARB_texture_compression, GL_ARB_texture_cube_map, GL_ARB_texture_env_add, GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two, GL_ARB_texture_rectangle, GL_ARB_texture_storage, GL_ARB_trans
Bug#886093: Exception: settings.yml not found
On Fri, Mar 02, 2018 at 02:32:53PM +0100, Johannes Schauer wrote: > Does reading /usr/share/doc/python3-searx/README.Debian fix your issue? It does! Thanks. I was looking in the wrong readme file ( /usr/share/doc/searx/README.rst ) as it was the only help file that appeared in when I ran 'dpkg -L searx'. Perhaps it would be a good idea to mention that README in the error message, or in the (currently non-existent) man page? -- Pelle Hjek h...@member.fsf.org https://news.hjek.tk
Bug#886093: Exception: settings.yml not found
Package: searx
Version: 0.14.0+dfsg1-2
Followup-For: Bug #886093
Dear Maintainer,
Joseph Nuthalapati wrote:
> > SearX currently doesn't start up when run with Python 3 as it tries
> > to parse the settings.yml file with ASCII codecs.
Johannes Schauer wrote:
> Please provide more support for your theory.
I am encountering what is possibly the same bug here. I will just
provide the error message rather than making up a theory of why it
happens.
When I run `searx-run`, I get this error:
```
Traceback (most recent call last):
File "/usr/bin/searx-run", line 11, in
load_entry_point('searx==0.14.0', 'console_scripts', 'searx-run')()
File "/usr/lib/python3/dist-packages/pkg_resources/__init__.py", line 572, in
load_entry_point
return get_distribution(dist).load_entry_point(group, name)
File "/usr/lib/python3/dist-packages/pkg_resources/__init__.py", line 2755,
in load_entry_point
return ep.load()
File "/usr/lib/python3/dist-packages/pkg_resources/__init__.py", line 2408,
in load
return self.resolve()
File "/usr/lib/python3/dist-packages/pkg_resources/__init__.py", line 2414,
in resolve
module = __import__(self.module_name, fromlist=['__name__'], level=0)
File "/usr/lib/python3/dist-packages/searx/__init__.py", line 51, in
raise Exception('settings.yml not found')
Exception: settings.yml not found
```
I also tried copying the default settings.yml to the folder I run searx
in, like this:
```
7z x /usr/share/doc/searx/examples/settings.yml.gz
```
but I get the same error.
-- System Information:
Debian Release: buster/sid
APT prefers testing
APT policy: (500, 'testing'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 4.14.0-3-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8),
LANGUAGE=en_GB:en (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
LSM: AppArmor: enabled
Versions of packages searx depends on:
ii python33.6.4-1
ii python3-searx 0.14.0+dfsg1-2
searx recommends no packages.
Versions of packages searx suggests:
pn nginx
pn uwsgi
pn uwsgi-plugin-python3
-- no debconf information
Bug#891879: gnome-chess: No 3D graphics
Package: gnome-chess Version: 1:3.26.0-3 Severity: normal Dear Maintainer, The description of the gnome-chess package is "chess game with 3D graphics," however the 3D graphics are nowhere to be found. -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 4.14.0-3-686-pae (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages gnome-chess depends on: ii dconf-gsettings-backend [gsettings-backend] 0.26.1-3 ii hoichess 0.21.0-2 ii libc62.26-6 ii libcairo21.15.10-1 ii libglib2.0-0 2.54.3-2 ii libgtk-3-0 3.22.28-1 ii librsvg2-2 2.40.20-2 Versions of packages gnome-chess recommends: ii yelp 3.26.0-2 Versions of packages gnome-chess suggests: pn bbchess pn crafty ii fairymax 5.0b-1 ii fruit 2.1.dfsg-7 ii glaurung 2.2-2+b2 ii gnuchess 6.2.5-1 ii phalanx22+d051004-14 ii sjeng 11.2-8+b3 ii stockfish 8-3 pn toga2 -- no debconf information
Bug#889690: closed by Ari Pollak (Bug#809064: fixed in gimp 2.8.20-2)
On Sun, Feb 25, 2018 at 01:39:07AM +, Debian Bug Tracking System wrote: > We believe that the bug you reported is fixed in the latest version of > gimp, which is due to be installed in the Debian FTP archive. It works now. Thanks for fixing this. -- Pelle Hjek h...@member.fsf.org https://news.hjek.tk
Bug#891837: pioneers: Bots don't build ships
Package: pioneers Version: 15.4-1 Severity: wishlist Tags: upstream Dear Maintainer, Bots participating in a Pioneers game don't build ships, only roads. This makes them particularly easy to beat on boards with lots of water, such as Archipelago and Seafarers. -- System Information: Debian Release: buster/sid APT prefers testing APT policy: (500, 'testing'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 4.14.0-3-686-pae (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) LSM: AppArmor: enabled Versions of packages pioneers depends on: ii libavahi-client3 0.7-3.1 ii libavahi-common3 0.7-3.1 ii libavahi-glib1 0.7-3.1 ii libc62.26-6 ii libcairo21.15.10-1 ii libgdk-pixbuf2.0-0 2.36.11-1 ii libglib2.0-0 2.54.3-2 ii libgnome-2-0 2.32.1-6 ii libgtk-3-0 3.22.28-1 ii libnotify4 0.7.7-3 ii libpango-1.0-0 1.40.14-1 ii libpangocairo-1.0-0 1.40.14-1 ii librsvg2-common 2.40.20-2 ii pioneers-console 15.4-1 ii pioneers-data15.4-1 Versions of packages pioneers recommends: ii beep 1.3-4+b1 ii yelp 3.26.0-2 Versions of packages pioneers suggests: pn pioneers-metaserver -- no debconf information
Bug#890600: gtkterm: No prompt
Hi I may have misunderstood the purpose of gtkterm, as there is another program with the same name, described like this: "GTKTerm is a small graphical shell like XTerm." https://sourceforge.net/projects/gtkterm/ I was mistakenly expecting GTKTerm to be a terminal emulator and was expecting it to show a prompt. Something that may have contributed to my confusion is the fact that GTKTerm segfaults when clicking in the "Help" menu, and that the service, on which the project web site in listed the GTKTerm man page ( https://fedorahosted.org/gtkterm/ ) is hosted, has been discontinued. -- Pelle Hjek h...@member.fsf.org https://news.hjek.tk On Fri, Feb 16, 2018 at 07:01:14PM +0100, Willem van den Akker wrote: > On Fri, 2018-02-16 at 18:44 +0200, Adrian Bunk wrote: > > Control: severity -1 grave > > > > On Fri, Feb 16, 2018 at 05:04:13PM +0100, Willem van den Akker wrote: > > > Hello Pelle, > > > > > > Please notice you are using reporting against an older version. > > > The latest version has many updates. > > >... > > > > This is the version in stable. > > > > This is the version normal users are expected to use, > > and it is supported by Debian until 2020. > > > > I cannot comment on the contents of this bug, but if it is as broken as > > it sounds this might be an RC issue in stable that should be fixed by > > the maintainer for stable. > > > > > Greetings > > > Willem vdAkker > > > > cu > > Adrian > > > > Ok, point taken :) > > Hello Pelle, > > Can you describe the situatie when the failure is shown? > What is connected to which serial port. What is your configuration > for that serial port. > > /Willem
Bug#890617: pyscrabble: No metaservers available and pyscrabble-server also doesn't work
Package: pyscrabble Version: 1.6.2-10 Severity: grave Justification: renders package unusable Dear Maintainer, When opening PyScrabble, users are asked to "register on a public server", however none are available, and the game is not playable without connecting to a server. It is possible to run the pyscrabble-server package, but this comes with no documentation describing how to register. The server listens on port and , and when navigating to http://localhost: with a web browser, I'm presented with a web interface to the server. This web interface does not provide the option of registering either, but running `dpkg -L pyscrabble-server` indicates that there's an endpoint called `user_admin`. When navigating to `http://localhost:/user_admin`, I get the following error in the browser: ``` : tuple index out of range /usr/lib/python2.7/dist-packages/twisted/internet/defer.py, line 150 in maybeDeferred 148""" 149try: 150result = f(*args, **kw) 151except: /usr/share/games/pyscrabble/python/pyscrabble/net/site.py, line 71 in locateChild 69 70if (segments[0] == 'user_admin'): 71return UserAdmin(original=segments[1], ctx=ctx, factory=self.factory), segments[2:] 72if (segments[0] == 'xmlrpc'): : tuple index out of range ``` To me it looks like pyscrabble-server is broken, which makes PyScrabble unusable. -- System Information: Debian Release: 9.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 4.9.0-5-686-pae (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages pyscrabble depends on: ii pyscrabble-common 1.6.2-10 ii python 2.7.13-2 ii python-gtk22.24.0-5.1 ii python-pygame 1.9.1release+dfsg-10+b2 pyscrabble recommends no packages. Versions of packages pyscrabble suggests: ii pyscrabble-server 1.6.2-10 -- no debconf information
Bug#890600: gtkterm: No prompt
Package: gtkterm Version: 0.99.7~rc1-0.3 Severity: grave Justification: renders package unusable Dear Maintainer, When opening gtkterm, I get no prompt. I can see a blinking square cursor. Nothing happens when I type. Gtkterm also reports this error, `Control signals read: Input/output error` to stderr. -- System Information: Debian Release: 9.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 4.9.0-5-686-pae (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages gtkterm depends on: ii libatk1.0-0 2.22.0-1 ii libc62.24-11+deb9u1 ii libcairo21.14.8-1 ii libfontconfig1 2.11.0-6.7+b1 ii libfreetype6 2.6.3-3.2 ii libgdk-pixbuf2.0-0 2.36.5-2+deb9u2 ii libglib2.0-0 2.50.3-2 ii libgtk2.0-0 2.24.31-2 ii libpango-1.0-0 1.40.5-1 ii libpangocairo-1.0-0 1.40.5-1 ii libpangoft2-1.0-01.40.5-1 ii libvte9 1:0.28.2-5+b2 ii libx11-6 2:1.6.4-3 ii libxext6 2:1.3.3-1+b2 gtkterm recommends no packages. gtkterm suggests no packages. -- no debconf information
Bug#889789: epiphany-browser: Flickering when reading PDFs
Package: epiphany-browser Version: 3.22.7-1 Severity: minor Dear Maintainer, When opening a PDF in Epiphany (using 'browser-plugin-evince') it flickers all the time, making it unpleasant to read. This happens with any PDF file I've tried, and these same files don't flicker when opened in Evince. -- System Information: Debian Release: 9.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 4.9.0-5-686-pae (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages epiphany-browser depends on: ii dbus-user-session [default-dbus-session-bus] 1.10.24-0+deb9u1 ii dbus-x11 [dbus-session-bus] 1.10.24-0+deb9u1 ii epiphany-browser-data 3.22.7-1 ii gsettings-desktop-schemas 3.22.0-1 ii iso-codes 3.75-1 ii libavahi-client3 0.6.32-2 ii libavahi-common3 0.6.32-2 ii libavahi-gobject0 0.6.32-2 ii libc6 2.24-11+deb9u1 ii libcairo2 1.14.8-1 ii libgcr-base-3-1 3.20.0-5.1 ii libgcr-ui-3-1 3.20.0-5.1 ii libgdk-pixbuf2.0-02.36.5-2+deb9u2 ii libglib2.0-0 2.50.3-2 ii libgnome-desktop-3-12 3.22.2-1 ii libgtk-3-03.22.11-1 ii libjavascriptcoregtk-4.0-18 2.16.6-0+deb9u1 ii libnotify40.7.7-2 ii libpango-1.0-01.40.5-1 ii libpangocairo-1.0-0 1.40.5-1 ii libsecret-1-0 0.18.5-3.1 ii libsoup2.4-1 2.56.0-2+deb9u1 ii libsqlite3-0 3.16.2-5+deb9u1 ii libwebkit2gtk-4.0-37 2.16.6-0+deb9u1 ii libx11-6 2:1.6.4-3 ii libxml2 2.9.4+dfsg1-2.2+deb9u2 ii libxslt1.11.1.29-2.1 Versions of packages epiphany-browser recommends: ii browser-plugin-evince 3.22.1-3+deb9u1 ii ca-certificates20161130+nmu1 ii evince 3.22.1-3+deb9u1 ii yelp 3.22.0-1 epiphany-browser suggests no packages. -- no debconf information
Bug#889690: gimp: Cage transform always crashes Gimp
Package: gimp Version: 2.8.18-1+deb9u1 Severity: important Dear Maintainer, Cage tool always causes Gimp to crash. I created a new image, selected Cage Transform, created some selection points, clicked on the first selection point to finish the selection. The result is that Gimp becomes completely unresponsive. I expected Gimp to let me apply a cage transformation to the selection. -- System Information: Debian Release: 9.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 4.9.0-5-686-pae (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages gimp depends on: ii gimp-data2.8.18-1+deb9u1 ii libaa1 1.4p5-44+b1 ii libatk1.0-0 2.22.0-1 ii libbabl-0.1-00.1.18-1 ii libbz2-1.0 1.0.6-8.1 ii libc62.24-11+deb9u1 ii libcairo21.14.8-1 ii libdbus-1-3 1.10.24-0+deb9u1 ii libdbus-glib-1-2 0.108-2 ii libexif120.6.21-2+b2 ii libexpat12.2.0-2+deb9u1 ii libfontconfig1 2.11.0-6.7+b1 ii libfreetype6 2.6.3-3.2 ii libgdk-pixbuf2.0-0 2.36.5-2+deb9u2 ii libgegl-0.3-00.3.8-4 ii libgimp2.0 2.8.18-1+deb9u1 ii libglib2.0-0 2.50.3-2 ii libgs9 9.20~dfsg-3.2+deb9u1 ii libgtk2.0-0 2.24.31-2 ii libgudev-1.0-0 230-3 ii libice6 2:1.0.9-2 ii libjpeg62-turbo 1:1.5.1-2 ii libjson-glib-1.0-0 1.2.6-1 ii liblcms2-2 2.8-4 ii libmng1 1.0.10+dfsg-3.1+b5 ii libpango-1.0-0 1.40.5-1 ii libpangocairo-1.0-0 1.40.5-1 ii libpangoft2-1.0-01.40.5-1 ii libpng16-16 1.6.28-1 ii libpoppler-glib8 0.48.0-2+deb9u2 ii librsvg2-2 2.40.16-1+b1 ii libsm6 2:1.2.2-1+b3 ii libtiff5 4.0.8-2+deb9u2 ii libwmf0.2-7 0.2.8.4-10.6 ii libx11-6 2:1.6.4-3 ii libxcursor1 1:1.1.14-1+deb9u1 ii libxext6 2:1.3.3-1+b2 ii libxfixes3 1:5.0.3-1 ii libxmu6 2:1.1.2-2 ii libxpm4 1:3.5.12-1 ii libxt6 1:1.1.5-1 ii python 2.7.13-2 ii python-gtk2 2.24.0-5.1 ii python2.72.7.13-2+deb9u2 ii zlib1g 1:1.2.8.dfsg-5 Versions of packages gimp recommends: ii ghostscript 9.20~dfsg-3.2+deb9u1 Versions of packages gimp suggests: pn gimp-data-extras pn gimp-help-en | gimp-help ii gvfs-backends 1.30.4-1 ii libasound21.1.3-5 -- no debconf information
Bug#824383: gnome-software: packages not installed from repositories are claimed to be non-free
Package: gnome-software Version: 3.22.5-1 Followup-For: Bug #824383 Dear Maintainer, Gnome Software reports Puredata as being proprietary. I've installed Puredata from the Debian Stretch Backports repository, so not sure if it's exactly the same bug. -- System Information: Debian Release: 9.3 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable'), (1, 'experimental') Architecture: i386 (i686) Kernel: Linux 4.9.0-5-686-pae (SMP w/2 CPU cores) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8), LANGUAGE=en_GB:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages gnome-software depends on: ii appstream0.10.6-2 ii dconf-gsettings-backend [gsettings-backend] 0.26.0-2+b1 ii gnome-software-common3.22.5-1 ii gsettings-desktop-schemas3.22.0-1 ii libappstream-glib8 0.6.8-1 ii libatk1.0-0 2.22.0-1 ii libc62.24-11+deb9u1 ii libcairo-gobject21.14.8-1 ii libcairo21.14.8-1 ii libenchant1c2a 1.6.0-11+b1 ii libfwupd10.7.4-2 ii libgdk-pixbuf2.0-0 2.36.5-2+deb9u2 ii libglib2.0-0 2.50.3-2 ii libgnome-desktop-3-123.22.2-1 ii libgtk-3-0 3.22.11-1 ii libgtkspell3-3-0 3.0.9-1 ii libgudev-1.0-0 230-3 ii libjson-glib-1.0-0 1.2.6-1 ii libpackagekit-glib2-18 1.1.5-2 ii libpango-1.0-0 1.40.5-1 ii libpangocairo-1.0-0 1.40.5-1 ii libpolkit-gobject-1-00.105-18 ii libsecret-1-00.18.5-3.1 ii libsoup2.4-1 2.56.0-2+deb9u1 ii libsqlite3-0 3.16.2-5+deb9u1 ii packagekit 1.1.5-2 ii software-properties-gtk 0.96.20.2-1 gnome-software recommends no packages. Versions of packages gnome-software suggests: pn fwupd pn gnome-software-plugin-flatpak pn gnome-software-plugin-limba -- no debconf information
Bug#836827: pd-zexy: 'date' and 'time' objects missing (only their help files are in package)
Package: pd-zexy Version: 2.2.6-2 Severity: normal Dear Maintainer, To reproduce this: - open Pd - Click 'Help' -> 'Browser...' -> 'zexy/' -> 'date-help.pd' or 'time-help.pd' When the help patch is opened, the 'date' and/or 'time' objects will appear with a dashed line, and Pd console will print "date ... couldn't create" and "time ... couldn't create" When opening a file manager at /usr/lib/pd/extra/zexy, it appears that 'time-help.pd' and 'date-help.pd' exist, but 'time.pd' and 'date.pd' (which are the source files for the objects described in the help patches) are missing. I was expecting the 'time' and 'date' objects to be included in the 'pd-zexy' package along with the documentation. -- System Information: Debian Release: stretch/sid APT prefers testing APT policy: (500, 'testing') Architecture: i386 (i686) Kernel: Linux 4.6.0-1-686-pae (SMP w/1 CPU core) Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages pd-zexy depends on: ii libc6 2.23-4 ii puredata0.47.1-1 ii puredata-core [pd] 0.47.1-1 pd-zexy recommends no packages. pd-zexy suggests no packages. -- no debconf information
Bug#511002: [Fwd: [patch] French translation typos]
Version Française wrote: > Bonjour, > > Vous trouverez ci-joint un mail d'un membre du projet Debian qui propose un > patch pour quelques fautes de frappe présentes dans la VF de Vim. > > Cordialement, > > Adrien Beau > > Hi, > > Attached are a few fixes for the French Vim translations as reported in > the Debian BTS[0]. The reporter also mentioned that the translation may > need a full review, which seems likely as the translations haven't been > updated since the first pre-release of Vim 7.2. > > [0] - http://bugs.debian.org/511002 > -- > James > GPG Key: 1024D/61326D40 2003-09-02 James Vega > > -BEGIN PGP SIGNATURE- > Version: GnuPG v1.4.9 (GNU/Linux) > > iEYEARECAAYFAkllA3gACgkQDb3UpmEybUCRQACffFB/qPufYKb2nqW/ArSY9wmG > XawAnjg/RbYLtVs/cJ7WcWtjfxur9nYy > =YoU1 > -END PGP SIGNATURE- Thanks for forwarding this bug report to me. All 3 typos in the submitted patch were still present in the latest version of Vim. I have fixed all of them. I will submit the updated file to Bram shortly. Since Nov 2008, I am now taking care of maintaining the French translation (and Esperanto translation), so you can report errors to me directly at , should you find more errors. I have also made major updates to the French tutorial recently (merged Vim-7.* changes). Best regards -- Dominique http://dominiko.livejournal.com -- To UNSUBSCRIBE, email to debian-bugs-dist-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org
Bug#498912: mirrormagic: Crashes on launch
Package: mirrormagic Version: 2.0.2.0deb1-7 Severity: important Mirrormagic crashes immediately on launch with this output [EMAIL PROTECTED]:~$ mirrormagic mirrormagic: gadget incomplete (missing Bitmap) mirrormagic: aborting [EMAIL PROTECTED]:~$ mirrormagic -v mirrormagic: warning: cannot open configuration file '/home/pelle/.mirrormagic/setup.conf' mirrormagic: warning: using default setup values mirrormagic: warning: cannot find any valid music files in directory '/usr/share/games/mirrormagic/music' mirrormagic: warning: cannot open configuration file '/home/pelle/.mirrormagic/levelsetup.conf' mirrormagic: warning: using default setup values mirrormagic: warning: cannot open configuration file '/home/pelle/.mirrormagic/levelsetup/classic_deflektor/levelsetup.conf' mirrormagic: warning: using default setup values mirrormagic: gadget incomplete (missing Bitmap) mirrormagic: aborting I'm using amd64 architecture, and according to this page: https://bugzilla.redhat.com/show_bug.cgi?id=208584 mirrormagic crashed with the same output when run on amd64 in Red Hat. The bug was easily fixed in Red Hat (according to that web page), so if it's the same error, it should be easy to fix in Debian too. -- System Information: Debian Release: lenny/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 2.6.23.17-gandalf (SMP w/2 CPU cores; PREEMPT) Locale: LANG=sv_SE.UTF-8, LC_CTYPE=sv_SE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/bash Versions of packages mirrormagic depends on: ii debconf [debconf-2.0] 1.5.22Debian configuration management sy ii libc6 2.7-13GNU C Library: Shared libraries ii libsdl-image1.21.2.6-3 image loading library for Simple D ii libsdl-mixer1.21.2.8-4 mixer library for Simple DirectMed ii libsdl1.2debian1.2.13-2 Simple DirectMedia Layer ii mirrormagic-data 2.0.2.0deb1-7 Data files for mirrormagic mirrormagic recommends no packages. mirrormagic suggests no packages. -- debconf-show failed -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#436514: amsn-remote-CLI is broken
Package: amsn Version: 0.97~rc1+dfsg1-4 Hi! The amsn-remote-CLI TCL script (located in /usr/bin in debian) fails with this error message: couldn't read file "amsncore.tcl": no such file or directory while executing "source amsncore.tcl" (file "/usr/bin/amsn-remote-CLI" line 8) making a copy of the script and adding an absolute path (/usr/share/amsn/) solves the problem, and you get a similar problem for migmd5.tcl. After changing into an absolute path there too the script works fine. The script amsn-remote has the same problem, though I haven't tried fixing it as I don't use it. /Pelle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#382427: Problem solved
Hi! At first I thought that the first lines of the form Warning: Color name "Black" is not defined had nothing to do with the segfault, but they turned out to be the source of the problem. Similar error messages started to appear in other apps (sawfish and gnuplot) and some googling indicated that it had something to do with the file /etc/X11/rgb.txt. After reinstalling the package x11-common that owns that file, the problems went away in all the apps, so the bug must actually have been in the update process of xorg in the debian packaging I guess. You may close the bug unless you think it's unacceptable for XEmacs to segfault in a broken xorg installation. /Pelle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#382427: New traceback
Hi! Here is the requested traceback, as can be seen it doesn't appear to be a duplicate of #369165. (gdb) bt #0 0xe410 in __kernel_vsyscall () #1 0xb7affb16 in kill () from /lib/tls/i686/cmov/libc.so.6 #2 0x080b57b5 in fatal_error_signal () #3 #4 0x081c99cc in Fx_window_id () #5 0x08116162 in update_frame_face_values () #6 0x081c8b14 in Fx_window_id () #7 0x08130836 in Fmake_frame () #8 0x080be8e3 in Ffuncall () #9 0x08090e2a in execute_rare_opcode () #10 0x08093740 in funcall_compiled_function () #11 0x080be825 in Ffuncall () #12 0x08090e2a in execute_rare_opcode () #13 0x08093740 in funcall_compiled_function () #14 0x080bcde1 in Feval () #15 0x080ba2ab in condition_case_1 () #16 0x080bc531 in condition_case_3 () #17 0x08090aa7 in execute_rare_opcode () #18 0x080916e7 in execute_rare_opcode () #19 0x08093740 in funcall_compiled_function () #20 0x080bcde1 in Feval () #21 0x080ba2ab in condition_case_1 () #22 0x0809c43c in Freally_early_error_handler () #23 0x080b797f in internal_catch () #24 0x0809c522 in initial_command_loop () #25 0x080b69d6 in xemacs_21_4_19_i386_debian_linux () #26 0x080b7583 in main () Since the crash seems to occur in the i686 optimized version of libc6 I tried to uninstall the libc6-i686 package, but that did not solve the problem, though the traceback changed into #0 0xb7a52bf1 in kill () from /lib/tls/libc.so.6 #1 0x080b57b5 in fatal_error_signal () #2 #3 0x081c99cc in Fx_window_id () #4 0x08116162 in update_frame_face_values () #5 0x081c8b14 in Fx_window_id () #6 0x08130836 in Fmake_frame () #7 0x080be8e3 in Ffuncall () #8 0x08090e2a in execute_rare_opcode () #9 0x08093740 in funcall_compiled_function () #10 0x080be825 in Ffuncall () #11 0x08090e2a in execute_rare_opcode () #12 0x08093740 in funcall_compiled_function () #13 0x080bcde1 in Feval () #14 0x080ba2ab in condition_case_1 () #15 0x080bc531 in condition_case_3 () #16 0x08090aa7 in execute_rare_opcode () #17 0x080916e7 in execute_rare_opcode () #18 0x08093740 in funcall_compiled_function () #19 0x080bcde1 in Feval () #20 0x080ba2ab in condition_case_1 () #21 0x0809c43c in Freally_early_error_handler () #22 0x080b797f in internal_catch () #23 0x0809c522 in initial_command_loop () #24 0x080b69d6 in xemacs_21_4_19_i386_debian_linux () #25 0x080b7583 in main () /Pelle -- Pelle Nilsson [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#382427: XEmacs suddenly segfaults when started
.2 Reading symbols from /lib/tls/i686/cmov/libm.so.6...(no debugging symbols found)...done. Loaded symbols for /lib/tls/i686/cmov/libm.so.6 Reading symbols from /lib/tls/i686/cmov/libutil.so.1...(no debugging symbols found)...done. Loaded symbols for /lib/tls/i686/cmov/libutil.so.1 Reading symbols from /lib/tls/i686/cmov/libc.so.6...(no debugging symbols found)...done. Loaded symbols for /lib/tls/i686/cmov/libc.so.6 Reading symbols from /lib/tls/i686/cmov/libdl.so.2...(no debugging symbols found)...done. Loaded symbols for /lib/tls/i686/cmov/libdl.so.2 Reading symbols from /usr/lib/libz.so.1... (no debugging symbols found)...done. Loaded symbols for /usr/lib/libz.so.1 Reading symbols from /usr/lib/libXau.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXau.so.6 Reading symbols from /usr/lib/libXdmcp.so.6...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXdmcp.so.6 Reading symbols from /usr/lib/liblber.so.2...(no debugging symbols found)...done. Loaded symbols for /usr/lib/liblber.so.2 Reading symbols from /lib/tls/i686/cmov/libresolv.so.2...(no debugging symbols found)...done. Loaded symbols for /lib/tls/i686/cmov/libresolv.so.2 Reading symbols from /lib/tls/i686/cmov/libcrypt.so.1... (no debugging symbols found)...done. Loaded symbols for /lib/tls/i686/cmov/libcrypt.so.1 Reading symbols from /usr/lib/libsasl2.so.2...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libsasl2.so.2 Reading symbols from /usr/lib/libgnutls.so.13...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libgnutls.so.13 Reading symbols from /usr/lib/libtasn1.so.3...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libtasn1.so.3 Reading symbols from /usr/lib/libgcrypt.so.11...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libgcrypt.so.11 Reading symbols from /usr/lib/libgpg-error.so.0... (no debugging symbols found)...done. Loaded symbols for /usr/lib/libgpg-error.so.0 Reading symbols from /lib/tls/i686/cmov/libpthread.so.0...(no debugging symbols found)...done. Loaded symbols for /lib/tls/i686/cmov/libpthread.so.0 Reading symbols from /lib/ld-linux.so.2...(no debugging symbols found)...done. Loaded symbols for /lib/ld-linux.so.2 Reading symbols from /lib/tls/i686/cmov/libnsl.so.1...(no debugging symbols found)...done. Loaded symbols for /lib/tls/i686/cmov/libnsl.so.1 Reading symbols from /usr/lib/X11/locale/common/xlcUTF8Load.so.2...(no debugging symbols found)...done. Loaded symbols for /usr/lib/X11/locale/common/xlcUTF8Load.so.2 Reading symbols from /lib/tls/i686/cmov/libnss_files.so.2... (no debugging symbols found)...done. Loaded symbols for /lib/tls/i686/cmov/libnss_files.so.2 Reading symbols from /lib/tls/i686/cmov/libnss_compat.so.2...(no debugging symbols found)...done. Loaded symbols for /lib/tls/i686/cmov/libnss_compat.so.2 Reading symbols from /lib/tls/i686/cmov/libnss_nis.so.2...(no debugging symbols found)...done. Loaded symbols for /lib/tls/i686/cmov/libnss_nis.so.2 Reading symbols from /usr/lib/X11/locale/common/ximcp.so.2...(no debugging symbols found)...done. Loaded symbols for /usr/lib/X11/locale/common/ximcp.so.2 Reading symbols from /usr/lib/libXcursor.so.1...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXcursor.so.1 Reading symbols from /usr/lib/libXrender.so.1... (no debugging symbols found)...done. Loaded symbols for /usr/lib/libXrender.so.1 Reading symbols from /usr/lib/libXfixes.so.3...(no debugging symbols found)...done. Loaded symbols for /usr/lib/libXfixes.so.3 Reading symbols from /usr/lib/X11/locale/common/xomGeneric.so.2...(no debugging symbols found)...done. Loaded symbols for /usr/lib/X11/locale/common/xomGeneric.so.2 (no debugging symbols found) Core was generated by `xemacs21-mule'. Program terminated with signal 11, Segmentation fault. #0 0xe410 in __kernel_vsyscall () (gdb) /Pelle -- Pelle Nilsson [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#368604: Cannot download dot-files
Package: bittornado Version: 0.3.15-1 Hi! If a torrent contains any files starting with a dot (.), bittornado will refuse to open the torrent altogether with the error message like this: ERROR ( ) - got bad file info - path <.filename> disallowed for security reasons This behavior is probably inherited from the Windows version. It isn't really justified in Windows either as far as I can see, but certainly not in linux. A torrent-file which is affected by the problem is located at http://static.thepiratebay.org/hashtorrent/3470417.torrent/The.Chronicles.Of.Narnia.The.Lion.The.Witch.And.The.Wardrobe.200.3470417.TPB.torrent /Pelle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#351540: Zeroconf overwrites working IP
Hi! I had the same problem as others have reported here. Zeroconf was installed automatically and kept overwriting my perfectly healthy IP-adress received through DHCP with a private IP-adress. I solved the problem by following a tip to add "FALLBACK=yes" to /etc/default/zeroconf. Since multiple people have experienced this problem I really think you should look into this. /Pelle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#338051: Cron sends malformed mails
Package: cron Version: 3.0pl1-91 Hi! The mails I get from cron use utf-8 as charset, but they aren't marked as using utf-8 (they completely miss a Content-Type mail header). I guess that the mails coming from cron use whatever charset is used by the system's locale, since it just mails the output from the cron-script unaltered. But as far as I can see, the mails should still be marked with the correct charset, as it make perfect sense to have one charset in the system's locale, and another default charset in one's MUA for mails lacking charset info. /Pelle -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#294281: Problem solved
Hi The problem is solved in the new version (0.3.10-2), it works fine now. Seems like the previous version depended on the wrong wxgtk package. /Pelle -- Pelle Nilsson [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Bug#294281: btdownloadgui refuses to run
Package: bittornado-gui Version: 0.3.10-1 Hi I installed the bittornado-gui debian package, and as a consequense the following packages were also automatically installed: libwxgtk2.5.3 (2.5.3.2) libwxgtk2.5.3-python (2.5.3.2) wxpython2.5.3 (2.5.3.2) Other relevant packages that were already installed include: python2.3 (2.3.4+2.3.5c1-2) bittornado (0.3.10-1) Despite this, btdownloadgui refuses to run with the following error: wxPython is either not installed or has not been installed properly. There is no other output. The result is the same for the other bt*gui programs. The curses versions work fine. /Pelle -- Pelle Nilsson [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
