Bug#348782: [aha152_cs] (scsi0:x:0) command sent incompletely (1/12) (was: Re: Bug#348782)
hi all, I looked at an old bug regarding my scsi hardware: On Wed, Mar 08, 2006 at 11:00:43PM +0100, Philippe Bourcier wrote: Package: linux-image-2.6-686 Version: 2.6.15-8 Followup-For: Bug #348782 [...] debian 2.6.15-8 doesn't resolve: I have a scsi tower (2*dd, cdrom reader, cdrom burner) connected to my laptop with a pcmcia card: Adaptec, Inc. - APA-1460 SCSI Host Adapter when I keep the tower shuted, everything is ok: I can boot with the card inserted when I power on the tower, the boot crash: (I copy the message by hand) BUG: soft lockup detected on CPUU#0! Pid: 4, comm:events/0 EIP: 0060 [c0121d40]CPU:0 EIP is at worker_thread+0x129/0x19f EFLAGS: 0246 Not tainted (2.6.15-1-686) EAX: c8c83084 EBX: c8c83084 ECX: c8c83080 EDX: c8c83084 ESI: c7ff59a0 EDI: 0246 EBP: DS: 0076 ES:007b CR0: 8005003b CR2: bfd25124 CR3: 076e3000 CR4: 0240 [c8c7c31a] run+0x0/0x3b [aha152_cs] [c0113708] default_wake_function+0x0/0x12 [c0121c17] worker_thread+0x0/0x19f [c0124bd0] kthread+0x68/0x95 [c0124b68] kthread+0x68/0x95 [c01012a9] kernel_thread_helper+0x5/0xb [...] -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=en_US.UTF-8, [EMAIL PROTECTED] (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8) Versions of packages linux-image-2.6-686 depends on: ii linux-image-2.6.15-1-686 2.6.15-8 Linux kernel 2.6.15 image on PPro/ linux-image-2.6-686 recommends no packages. -- no debconf information now, it seems to work... just (scsi0:0:0) command sent incompletely (1/12) and (scsi0:1:0) command sent incompletely (1/12) annoys me; am I wrong? $ uname -a Linux ile 2.6.16-1-686 #2 Thu Apr 20 20:35:02 UTC 2006 i686 GNU/Linux $ dmesg Linux version 2.6.16-1-686 (Debian 2.6.16-9) ([EMAIL PROTECTED]) (gcc version 4.0.3 (Debian 4.0.3-1)) #2 Thu Apr 20 20:35:02 UTC 2006 [...] PCI: Found IRQ 11 for device :00:03.0 Yenta: CardBus bridge found at :00:03.0 [:] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket :00:03.0, mfunc 0xcba97543, devctl 0x62 Yenta: ISA IRQ mask 0x06b8, PCI irq 11 Socket status: 3010 PCI: Found IRQ 11 for device :00:03.1 Yenta: CardBus bridge found at :00:03.1 [:] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket :00:03.1, mfunc 0xcba97543, devctl 0x62 [...] Yenta: ISA IRQ mask 0x06b8, PCI irq 11 Socket status: 3010 [...] pccard: PCMCIA card inserted into slot 0 pccard: PCMCIA card inserted into slot 1 [...] cs: IO port probe 0x100-0x4ff: excluding 0x220-0x22f 0x300-0x307 0x378-0x37f 0x388-0x38f cs: IO port probe 0x100-0x4ff: excluding 0x220-0x22f 0x300-0x307 0x378-0x37f 0x388-0x38f cs: IO port probe 0x800-0x8ff: excluding 0x800-0x807 cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xa00-0xaff: clean. usb 1-1.4: configuration #1 chosen from 1 choice cs: memory probe 0xa000-0xa0ff: clean. pcmcia: registering new device pcmcia0.0 cs: IO port probe 0x800-0x8ff: excluding 0x800-0x807 cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xa00-0xaff: clean. cs: memory probe 0xa000-0xa0ff: excluding 0xa000-0xa00f pcmcia: registering new device pcmcia1.0 [...] SCSI subsystem initialized aha152x: resetting bus... aha152x0: vital data: rev=1, io=0x340 (0x340/0x340), irq=3, scsiid=7, reconnect=enabled, parity=enabled, synchronous=enabled, delay=100, extended translation=disabled aha152x0: trying software interrupt, ok. scsi0 : Adaptec 152x SCSI driver; $Revision: 2.7 $ (scsi0:0:0) Synchronous Data Transfer Request period = 200 ns offset = 8 Vendor: IBM Model: DNES-309170 Rev: SA30 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:0:0) command sent incompletely (1/12) (scsi0:1:0) Synchronous Data Transfer Request period = 200 ns offset = 8 Vendor: IBM Model: DNES-309170 Rev: SA30 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:1:0) command sent incompletely (1/12) (scsi0:2:0) Synchronous Data Transfer Request period = 200 ns offset = 8 Vendor: PLEXTOR Model: CD-ROM PX-40TSRev: 1.10 Type: CD-ROM ANSI SCSI revision: 02 (scsi0:3:0) Synchronous Data Transfer Request period = 200 ns offset = 8 Vendor: YAMAHAModel: CRW8424S Rev: 1.0d Type: CD-ROM ANSI SCSI revision: 02 [...] SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) ts: Compaq touchscreen protocol output sda: Write Protect is off sda: Mode Sense: c3 00 00 08 SCSI device sda: drive cache: write back SCSI device sda: 17916240 512-byte hdwr sectors (9173 MB) sda: Write Protect is off sda: Mode
Bug#348782: [aha152_cs] (scsi0:x:0) command sent incompletely (1/12) (was: Re: Bug#348782)
On Mon, 24 Apr 2006, Philippe Bourcier wrote: hi all, I looked at an old bug regarding my scsi hardware: On Wed, Mar 08, 2006 at 11:00:43PM +0100, Philippe Bourcier wrote: Package: linux-image-2.6-686 Version: 2.6.15-8 Followup-For: Bug #348782 [...] debian 2.6.15-8 doesn't resolve: I have a scsi tower (2*dd, cdrom reader, cdrom burner) connected to my laptop with a pcmcia card: Adaptec, Inc. - APA-1460 SCSI Host Adapter when I keep the tower shuted, everything is ok: I can boot with the card inserted when I power on the tower, the boot crash: (I copy the message by hand) BUG: soft lockup detected on CPUU#0! Pid: 4, comm:events/0 EIP: 0060 [c0121d40]CPU:0 EIP is at worker_thread+0x129/0x19f EFLAGS: 0246 Not tainted (2.6.15-1-686) EAX: c8c83084 EBX: c8c83084 ECX: c8c83080 EDX: c8c83084 ESI: c7ff59a0 EDI: 0246 EBP: DS: 0076 ES:007b CR0: 8005003b CR2: bfd25124 CR3: 076e3000 CR4: 0240 [c8c7c31a] run+0x0/0x3b [aha152_cs] [c0113708] default_wake_function+0x0/0x12 [c0121c17] worker_thread+0x0/0x19f [c0124bd0] kthread+0x68/0x95 [c0124b68] kthread+0x68/0x95 [c01012a9] kernel_thread_helper+0x5/0xb [...] -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=en_US.UTF-8, [EMAIL PROTECTED] (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8) Versions of packages linux-image-2.6-686 depends on: ii linux-image-2.6.15-1-686 2.6.15-8 Linux kernel 2.6.15 image on PPro/ linux-image-2.6-686 recommends no packages. -- no debconf information now, it seems to work... just (scsi0:0:0) command sent incompletely (1/12) and (scsi0:1:0) command sent incompletely (1/12) annoys me; am I wrong? I've looked at this driver a lot in the past 2 weeks (from a SCSI viewpoint, not PCMCIA). It does not handle highmem ( 1 GB) scatter/gather lists correctly at all, so for me to use it successfully, I have to set: .unchecked_isa_dma = 1, in the scsi host template. However, if your system has = 1 GB of RAM or you are using a kernel that does not support highmem, that should not be an issue for you. $ uname -a Linux ile 2.6.16-1-686 #2 Thu Apr 20 20:35:02 UTC 2006 i686 GNU/Linux $ dmesg Linux version 2.6.16-1-686 (Debian 2.6.16-9) ([EMAIL PROTECTED]) (gcc version 4.0.3 (Debian 4.0.3-1)) #2 Thu Apr 20 20:35:02 UTC 2006 [...] PCI: Found IRQ 11 for device :00:03.0 Yenta: CardBus bridge found at :00:03.0 [:] Yenta: Enabling burst memory read transactions Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket :00:03.0, mfunc 0xcba97543, devctl 0x62 Yenta: ISA IRQ mask 0x06b8, PCI irq 11 Socket status: 3010 PCI: Found IRQ 11 for device :00:03.1 Yenta: CardBus bridge found at :00:03.1 [:] Yenta: Using CSCINT to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket :00:03.1, mfunc 0xcba97543, devctl 0x62 [...] Yenta: ISA IRQ mask 0x06b8, PCI irq 11 Socket status: 3010 [...] pccard: PCMCIA card inserted into slot 0 pccard: PCMCIA card inserted into slot 1 [...] cs: IO port probe 0x100-0x4ff: excluding 0x220-0x22f 0x300-0x307 0x378-0x37f 0x388-0x38f cs: IO port probe 0x100-0x4ff: excluding 0x220-0x22f 0x300-0x307 0x378-0x37f 0x388-0x38f cs: IO port probe 0x800-0x8ff: excluding 0x800-0x807 cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xa00-0xaff: clean. usb 1-1.4: configuration #1 chosen from 1 choice cs: memory probe 0xa000-0xa0ff: clean. pcmcia: registering new device pcmcia0.0 cs: IO port probe 0x800-0x8ff: excluding 0x800-0x807 cs: IO port probe 0xc00-0xcff: clean. cs: IO port probe 0xa00-0xaff: clean. cs: memory probe 0xa000-0xa0ff: excluding 0xa000-0xa00f pcmcia: registering new device pcmcia1.0 [...] SCSI subsystem initialized aha152x: resetting bus... aha152x0: vital data: rev=1, io=0x340 (0x340/0x340), irq=3, scsiid=7, reconnect=enabled, parity=enabled, synchronous=enabled, delay=100, extended translation=disabled aha152x0: trying software interrupt, ok. scsi0 : Adaptec 152x SCSI driver; $Revision: 2.7 $ (scsi0:0:0) Synchronous Data Transfer Request period = 200 ns offset = 8 Vendor: IBM Model: DNES-309170 Rev: SA30 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:0:0) command sent incompletely (1/12) (scsi0:1:0) Synchronous Data Transfer Request period = 200 ns offset = 8 Vendor: IBM Model: DNES-309170 Rev: SA30 Type: Direct-Access ANSI SCSI revision: 03 (scsi0:1:0) command sent incompletely (1/12) (scsi0:2:0) Synchronous Data Transfer Request period = 200 ns offset = 8 Vendor: PLEXTOR Model: CD-ROM PX-40TS
Bug#348782: [aha152_cs] (scsi0:x:0) command sent incompletely (1/12) (was: Re: Bug#348782)
On Mon, Apr 24, 2006 at 07:25:38AM -0700, Randy.Dunlap wrote: On Mon, 24 Apr 2006, Philippe Bourcier wrote: hi all, I looked at an old bug regarding my scsi hardware: On Wed, Mar 08, 2006 at 11:00:43PM +0100, Philippe Bourcier wrote: Package: linux-image-2.6-686 Version: 2.6.15-8 Followup-For: Bug #348782 [...] debian 2.6.15-8 doesn't resolve: I have a scsi tower (2*dd, cdrom reader, cdrom burner) connected to my laptop with a pcmcia card: Adaptec, Inc. - APA-1460 SCSI Host Adapter when I keep the tower shuted, everything is ok: I can boot with the card inserted when I power on the tower, the boot crash: (I copy the message by hand) BUG: soft lockup detected on CPUU#0! Pid: 4, comm:events/0 EIP: 0060 [c0121d40]CPU:0 EIP is at worker_thread+0x129/0x19f EFLAGS: 0246 Not tainted (2.6.15-1-686) EAX: c8c83084 EBX: c8c83084 ECX: c8c83080 EDX: c8c83084 ESI: c7ff59a0 EDI: 0246 EBP: DS: 0076 ES:007b CR0: 8005003b CR2: bfd25124 CR3: 076e3000 CR4: 0240 [c8c7c31a] run+0x0/0x3b [aha152_cs] [c0113708] default_wake_function+0x0/0x12 [c0121c17] worker_thread+0x0/0x19f [c0124bd0] kthread+0x68/0x95 [c0124b68] kthread+0x68/0x95 [c01012a9] kernel_thread_helper+0x5/0xb [...] -- System Information: Debian Release: testing/unstable APT prefers unstable APT policy: (500, 'unstable') Architecture: i386 (i686) Shell: /bin/sh linked to /bin/bash Kernel: Linux 2.6.15-1-686 Locale: LANG=en_US.UTF-8, [EMAIL PROTECTED] (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8) Versions of packages linux-image-2.6-686 depends on: ii linux-image-2.6.15-1-686 2.6.15-8 Linux kernel 2.6.15 image on PPro/ linux-image-2.6-686 recommends no packages. -- no debconf information now, it seems to work... just (scsi0:0:0) command sent incompletely (1/12) and (scsi0:1:0) command sent incompletely (1/12) annoys me; am I wrong? I've looked at this driver a lot in the past 2 weeks (from a SCSI viewpoint, not PCMCIA). It does not handle highmem ( 1 GB) scatter/gather lists correctly at all, so for me to use it successfully, I have to set: .unchecked_isa_dma = 1, in the scsi host template. However, if your system has = 1 GB of RAM or you are using a kernel that does not support highmem, that should not be an issue for you. $ cat /proc/meminfo MemTotal: 127220 kB [...] hope this will help, -- / \ ((__-^^-,-^^-__)) .''`. Philippe BOURCIER `-_---' `---_-' .-. : :' : http://bourcier.philippe.online.fr `--|o` 'o|--' /V\ `. `' \ ` / // \\ `- Linux Counter registered user #290012): :( /( )\ :o_o: ^^-^^ - -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]