Bug#682608: installation-reports: wireless failure upon boot after install using new netinst via wifi -- wheezy 64-bit
Package: installation-reports Severity: critical Tags: d-i Justification: breaks unrelated software Dear Maintainer, * What led up to the situation? wheezy install alpha 1 using netinst. wifi interface recognized and WPE secure network used to install wheezy alpha 1. Upon completion without error and when reboot the wireless interface was not completely recognized. The dual computer icon did not change and device not managed shown for wireless network. But firefox and ping worked, but evolution and other internet programs failed due to network being shown as down. If config -a showed wlan0 was enabled and working. * What exactly did you do (or not do) that was effective (or ineffective)? I went back and did a complete install from scratch using CAT6 cable to router. Installation went perfectly again. * What was the outcome of this action? This time upon reboot the system worked perfectly and the wireless network was recognized and connected to upon entering password. * What outcome did you expect instead? Hope this helps. I tried the weekly build, but the distinst tool does not do wireless. eth0 did work for the install and networking was functional. chuck -- Package-specific info: Boot method: Image version: Date: Date and time of the install Machine: Partitions: df -Tl will do; the raw partition table is preferred Base System Installation Checklist: [O] = OK, [E] = Error (please elaborate below), [ ] = didn't try it Initial boot: [ ] Detect network card:[ ] Configure network: [ ] Detect CD: [ ] Load installer modules: [ ] Clock/timezone setup: [ ] User/password setup:[ ] Detect hard drives: [ ] Partition hard drives: [ ] Install base system:[ ] Install tasks: [ ] Install boot loader:[ ] Overall install:[ ] Comments/Problems: Description of the install, in prose, and any thoughts, comments and ideas you had during the initial install. -- Please make sure that the hardware-summary log file, and any other installation logs that you think would be useful are attached to this report. Please compress large files using gzip. Once you have filled out this report, mail it to sub...@bugs.debian.org. == Installer lsb-release: == DISTRIB_ID=Debian DISTRIB_DESCRIPTION=Debian GNU/Linux installer DISTRIB_RELEASE=7.0 (wheezy) - installer build 20120723-00:03 X_INSTALLATION_MEDIUM=cdrom == Installer hardware-summary: == uname -a: Linux debian 3.2.0-3-amd64 #1 SMP Thu Jun 28 09:07:26 UTC 2012 x86_64 GNU/Linux lspci -knn: 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host Bridge [1022:9600] lspci -knn: Subsystem: Toshiba America Info Systems Device [1179:ff6a] lspci -knn: 00:01.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (int gfx) [1022:9602] lspci -knn: 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 1) [1022:9605] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:07.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to PCI bridge (PCIE port 3) [1022:9607] lspci -knn: Kernel driver in use: pcieport lspci -knn: 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] lspci -knn: Subsystem: Toshiba America Info Systems Device [1179:ff6a] lspci -knn: Kernel driver in use: ahci lspci -knn: 00:12.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] lspci -knn: Subsystem: Toshiba America Info Systems Device [1179:ff6a] lspci -knn: Kernel driver in use: ohci_hcd lspci -knn: 00:12.1 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0 USB OHCI1 Controller [1002:4398] lspci -knn: Subsystem: Toshiba America Info Systems Device [1179:ff6a] lspci -knn: Kernel driver in use: ohci_hcd lspci -knn: 00:12.2 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] lspci -knn: Subsystem: Toshiba America Info Systems Device [1179:ff6a] lspci -knn: Kernel driver in use: ehci_hcd lspci -knn: 00:13.0 USB controller [0c03]: Advanced Micro Devices [AMD] nee ATI SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] lspci -knn: Subsystem: Toshiba America Info Systems Device [1179:ff6a] lspci -knn: Kernel driver in use: ohci_hcd lspci -knn: 00:13.1
Bug#659474: spamassassin: sa-compile problem on upgrade
I've just gone through an upgrade from a basic squeeze installation on which sa-compile and sa-update had previously run successfully, and I don't see the behavior you're talking about. Had you enabled the cron job and run sa-compile successfully prior to the upgrade? My test system is a virtual machine on which only minimal packages were installed (e.g. nothing was selected from tasksel, and the only individual packages installed were openssh-server, spamassassin, and re2c), so it's hard to see where there might be a missing dependency. For reference, here are the relevant bits from my upgrade transcript: root@squeeze:~# apt-get install spamassassin re2c Reading package lists... Done Building dependency tree Reading state information... Done The following extra packages will be installed: binutils cpp cpp-4.4 gcc gcc-4.4 libc-dev-bin libc6-dev libdb4.7 libdigest-hmac-perl libdigest-sha1-perl liberror-perl libfont-afm-perl libgmp3c2 libgomp1 libhtml-format-perl libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libio-socket-inet6-perl libmail-spf-perl libmailtools-perl libmpfr4 libnet-dns-perl libnet-ip-perl libnetaddr-ip-perl libsocket6-perl libsys-hostname-long-perl libtimedate-perl liburi-perl libwww-perl linux-libc-dev make manpages-dev perl perl-modules spamc Suggested packages: binutils-doc cpp-doc gcc-4.4-locales gcc-multilib autoconf automake1.9 libtool flex bison gdb gcc-doc gcc-4.4-multilib libmudflap0-4.4-dev gcc-4.4-doc libgcc1-dbg libgomp1-dbg libmudflap0-dbg libcloog-ppl0 libppl-c2 libppl7 glibc-doc libdata-dump-perl libcrypt-ssleay-perl libio-socket-ssl-perl make-doc perl-doc libterm-readline-gnu-perl libterm-readline-perl-perl razor libnet-ident-perl libdbi-perl pyzor libcompress-zlib-perl libmail-dkim-perl Recommended packages: libsys-syslog-perl The following NEW packages will be installed: binutils cpp cpp-4.4 gcc gcc-4.4 libc-dev-bin libc6-dev libdb4.7 libdigest-hmac-perl libdigest-sha1-perl liberror-perl libfont-afm-perl libgmp3c2 libgomp1 libhtml-format-perl libhtml-parser-perl libhtml-tagset-perl libhtml-tree-perl libio-socket-inet6-perl libmail-spf-perl libmailtools-perl libmpfr4 libnet-dns-perl libnet-ip-perl libnetaddr-ip-perl libsocket6-perl libsys-hostname-long-perl libtimedate-perl liburi-perl libwww-perl linux-libc-dev make manpages-dev perl perl-modules re2c spamassassin spamc 0 upgraded, 38 newly installed, 0 to remove and 0 not upgraded. Need to get 28.9 MB of archives. After this operation, 95.6 MB of additional disk space will be used. Do you want to continue [Y/n]? ... Setting up spamassassin (3.3.1-1) ... SpamAssassin Mail Filter Daemon: disabled, see /etc/default/spamassassin root@squeeze:~# sa-update -v Update available for channel updates.spamassassin.org Update was available, and was downloaded and installed successfully root@squeeze:~# sa-compile Jul 23 23:56:17.520 [5628] info: generic: base extraction starting. this can take a while... Jul 23 23:56:17.520 [5628] info: generic: extracting from rules of type body_0 100% [=] 79.64 rules/sec 00m07s DONE 100% [=] 268.94 bases/sec 00m09s DONE Jul 23 23:56:35.153 [5628] info: body_0: 1039 base strings extracted in 18 seconds cd /tmp/.spamassassin5628tyS9VGtmp cd Mail-SpamAssassin-CompiledRegexps-body_0 re2c -i -b -o scanner1.c scanner1.re re2c -i -b -o scanner2.c scanner2.re re2c -i -b -o scanner3.c scanner3.re re2c -i -b -o scanner4.c scanner4.re re2c -i -b -o scanner5.c scanner5.re re2c -i -b -o scanner6.c scanner6.re /usr/bin/perl Makefile.PL PREFIX=/tmp/.spamassassin5628tyS9VGtmp/ignored INSTALLSITEARCH=/var/lib/spamassassin/compiled/5.010/3.003001 Writing Makefile for Mail::SpamAssassin::CompiledRegexps::body_0 make cp body_0.pm blib/lib/Mail/SpamAssassin/CompiledRegexps/body_0.pm /usr/bin/perl /usr/share/perl/5.10/ExtUtils/xsubpp -typemap /usr/share/perl/5.10/ExtUtils/typemap body_0.xs body_0.xsc mv body_0.xsc body_0.c cc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\1.0\ -DXS_VERSION=\1.0\ -fPIC -I/usr/lib/perl/5.10/CORE body_0.c cc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\1.0\ -DXS_VERSION=\1.0\ -fPIC -I/usr/lib/perl/5.10/CORE scanner1.c cc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -g -DVERSION=\1.0\ -DXS_VERSION=\1.0\ -fPIC -I/usr/lib/perl/5.10/CORE scanner2.c cc -c -D_REENTRANT -D_GNU_SOURCE -DDEBIAN -fno-strict-aliasing -pipe
Bug#682612: /sbin/ip6tables-multi: Cannot restore ip6tables, fails at Commit line
Package: iptables Version: 1.4.8-3 Severity: grave File: /sbin/ip6tables-multi Tags: security ipv6 Justification: user security hole I have the following file /etc/ip6tables.firewall.rules # Firewall configuration written by system-config-firewall # Manual customization of this file is not recommended. *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A INPUT -m rt --rt-type 0 --rt-segsleft 0 -j DROP -A FORWARD -m rt --rt-type 0 --rt-segsleft 0 -j DROP -A OUTPUT -m rt --rt-type 0 --rt-segsleft 0 -j DROP -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT -A INPUT -p ipv6-icmp -j ACCEPT -A INPUT -i lo -j ACCEPT -A INPUT -m state --state NEW -m udp -p udp --dport 546 -d fe80::/64 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT -A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT -A INPUT -j REJECT --reject-with icmp6-port-unreachable -A FORWARD -j REJECT --reject-with icmp6-port-unreachable COMMIT Then I run: sudo ip6tables-restore /etc/ip6tables.firewall.rules And I get: ip6tables-restore: line 18 failed Any idea how to fix this? -- System Information: Debian Release: 6.0.5 APT prefers stable-updates APT policy: (500, 'stable-updates'), (500, 'stable') Architecture: i386 (i686) Kernel: Linux 2.6.32-042stab057.1 (SMP w/1 CPU core) Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968) Shell: /bin/sh linked to /bin/bash Versions of packages iptables depends on: ii libc6 2.11.3-3 Embedded GNU C Library: Shared lib ii libnfnetlink0 1.0.0-1Netfilter netlink library iptables recommends no packages. iptables suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processed: Re: CVE-2011-4405 fixed in wheezy, not in squeeze
Processing commands for cont...@bugs.debian.org: tags 651204 +patch Bug #651204 [system-config-printer] CVE-2011-4405 Added tag(s) patch. thanks Stopping processing here. Please contact me if you need assistance. -- 651204: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=651204 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processed: tagging 682612
Processing commands for cont...@bugs.debian.org: # not a security issue on its own tags 682612 - security Bug #682612 [iptables] /sbin/ip6tables-multi: Cannot restore ip6tables, fails at Commit line Removed tag(s) security. thanks Stopping processing here. Please contact me if you need assistance. -- 682612: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682612 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#651204: CVE-2011-4405 fixed in wheezy, not in squeeze
tags 651204 +patch thanks Le mercredi, 30 mai 2012 11.47:05, Thijs Kinkhorst a écrit : Hi, Wheezy and sid contain a patch for this issue. Squeeze seems still affected. Are you able to provide an updated package for squeeze? Would the attached patch do the job for Squeeze? OdyX From: Till Kamppeter till.kamppe...@gmail.com Date: Tue, 13 Dec 2011 20:54:26 +0100 Subject: Fix MITM via unencrypted metadata download Adapted to Squeeze by Didier Raboud o...@debian.org on Tue Jul 24 10:09:16 CEST 2012. Closes: #651204 --- cupshelpers/openprinting.py | 35 +++ 1 files changed, 23 insertions(+), 12 deletions(-) --- a/cupshelpers/openprinting.py +++ b/cupshelpers/openprinting.py @@ -19,7 +19,7 @@ ## along with this program; if not, write to the Free Software ## Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -import urllib, httplib, platform, threading, tempfile, traceback +import pycurl,urllib, httplib, platform, threading, tempfile, traceback import os, sys from xml.etree.ElementTree import XML from . import Device @@ -42,10 +42,18 @@ self.parameters = parameters self.callback = callback self.user_data = user_data +self.result = self.setDaemon (True) def run (self): + +# Callback function for pycURL collecting the data coming from +# the web server +def collect_data(result): +self.result += result; +return len(result) + # CGI script to be executed query_command = /query.cgi # Headers for the post request @@ -55,26 +63,26 @@ (urllib.urlencode (self.parameters), self.parent.language[0], self.parent.language[0])) -self.url = http://%s%s?%s; % (self.parent.base_url, query_command, params) +self.url = https://%s%s?%s; % (self.parent.base_url, query_command, params) # Send request -result = None +self.result = status = 1 try: -conn = httplib.HTTPConnection(self.parent.base_url) -conn.request(POST, query_command, params, headers) -resp = conn.getresponse() -status = resp.status -if status == 200: -result = resp.read() -conn.close() +curl = pycurl.Curl() +curl.setopt(pycurl.SSL_VERIFYPEER, 1) +curl.setopt(pycurl.SSL_VERIFYHOST, 2) +curl.setopt(pycurl.WRITEFUNCTION, collect_data) +curl.setopt(pycurl.URL, self.url) +status = curl.perform() +if status == None: status = 0 +if (status != 0): +self.result = sys.exc_info () except: -result = sys.exc_info () - -if status == 200: -status = 0 +self.result = sys.exc_info () +if status == None: status = 0 if self.callback != None: -self.callback (status, self.user_data, result) +self.callback (status, self.user_data, self.result) class OpenPrinting: def __init__(self, language=None): signature.asc Description: This is a digitally signed message part.
Bug#659474: spamassassin: sa-compile problem on upgrade
On Tue, Jul 24, 2012 at 12:19:46AM -0700, Noah Meyerhans wrote: Had you enabled the cron job and run sa-compile successfully prior to the upgrade? I don't remember. I had not touched the spamassassin setup for years. My test system is a virtual machine on which only minimal packages were installed (e.g. nothing was selected from tasksel, and the only individual packages installed were openssh-server, spamassassin, and re2c), so it's hard to see where there might be a missing dependency. As mentioned in the original report (why did you not cc the original reporter, btw?), the problem existed in between spamassassin upgrade and libc6-dev upgrade. If there was nothing holding back libc6-dev in your test apt-get upgrade (and it's likely that a minimal install would not have anything like that), the problem will not appear. If spamassassin did depend on the proper version of libc6-dev, it too would have been held back until dist-upgrade in my real-world case. $ grep -E 'spamassassin|libc9-dev' /var/log/dpkg.log 2012-07-20 15:27:03 upgrade spamassassin 3.3.1-1 3.3.2-3 2012-07-20 15:27:03 status half-configured spamassassin 3.3.1-1 2012-07-20 15:27:03 status unpacked spamassassin 3.3.1-1 2012-07-20 15:27:03 status half-installed spamassassin 3.3.1-1 2012-07-20 15:27:03 status half-installed spamassassin 3.3.1-1 2012-07-20 15:27:03 status half-installed spamassassin 3.3.1-1 2012-07-20 15:27:04 status unpacked spamassassin 3.3.2-3 2012-07-20 15:27:04 status unpacked spamassassin 3.3.2-3 2012-07-20 15:29:45 configure spamassassin 3.3.2-3 3.3.2-3 2012-07-20 15:29:45 status unpacked spamassassin 3.3.2-3 2012-07-20 15:29:45 status unpacked spamassassin 3.3.2-3 2012-07-20 15:29:45 status unpacked spamassassin 3.3.2-3 2012-07-20 15:29:45 status unpacked spamassassin 3.3.2-3 2012-07-20 15:29:45 status unpacked spamassassin 3.3.2-3 2012-07-20 15:29:45 status unpacked spamassassin 3.3.2-3 2012-07-20 15:29:45 status unpacked spamassassin 3.3.2-3 2012-07-20 15:29:45 status unpacked spamassassin 3.3.2-3 2012-07-20 15:29:45 status unpacked spamassassin 3.3.2-3 2012-07-20 15:29:45 status unpacked spamassassin 3.3.2-3 2012-07-20 15:29:45 status unpacked spamassassin 3.3.2-3 2012-07-20 15:29:45 status half-configured spamassassin 3.3.2-3 2012-07-20 15:49:55 configure spamassassin 3.3.2-3 3.3.2-3 2012-07-20 15:49:55 status half-configured spamassassin 3.3.2-3 2012-07-20 15:58:21 upgrade libc6-dev 2.11.3-3 2.13-33 2012-07-20 15:58:21 status half-configured libc6-dev 2.11.3-3 2012-07-20 15:58:21 status unpacked libc6-dev 2.11.3-3 2012-07-20 15:58:21 status half-installed libc6-dev 2.11.3-3 2012-07-20 15:58:23 status half-installed libc6-dev 2.11.3-3 2012-07-20 15:58:24 status unpacked libc6-dev 2.13-33 2012-07-20 15:58:24 status unpacked libc6-dev 2.13-33 2012-07-20 16:03:12 configure spamassassin:all 3.3.2-3 none 2012-07-20 16:03:12 status half-configured spamassassin:all 3.3.2-3 2012-07-20 16:04:12 status installed spamassassin:all 3.3.2-3 2012-07-20 16:04:13 configure libc6-dev:i386 2.13-33 none 2012-07-20 16:04:13 status unpacked libc6-dev:i386 2.13-33 2012-07-20 16:04:13 status half-configured libc6-dev:i386 2.13-33 2012-07-20 16:04:13 status installed libc6-dev:i386 2.13-33 2012-07-20 16:32:17 status triggers-pending spamassassin:all 3.3.2-3 2012-07-20 16:32:19 trigproc spamassassin:all 3.3.2-3 none 2012-07-20 16:32:19 status half-configured spamassassin:all 3.3.2-3 2012-07-20 16:33:37 status installed spamassassin:all 3.3.2-3 $ For reference, here are the relevant bits from my upgrade transcript: Sorry, you deleted some relevant bits: root@squeeze:~# apt-get upgrade Reading package lists... Done Building dependency tree ... 72 upgraded, 0 newly installed, 0 to remove and 116 not upgraded. What were those 72 packages? An interesting question is what would happen if instead of apt-get upgrade, you'd use apt-get install spamassassin after editing sources.list. That would likely expose the issue. (I may try this myself, in fact.) -- Antti-Juhani Kaijanaho, Jyväskylä, Finland http://antti-juhani.kaijanaho.fi/newblog/ http://www.flickr.com/photos/antti-juhani/ signature.asc Description: Digital signature
Processed: tagging 682386, tagging 681742, found 681758 in 1.2.1-2.1, found 681963 in 2.0.2-1
Processing commands for cont...@bugs.debian.org: tags 682386 + pending Bug #682386 [nvidia-support] [INTL:pl] Updated Polish debconf translation Added tag(s) pending. tags 681742 + moreinfo Bug #681742 [fglrx-driver] fglrx-driver: Eclipse Android Development Tool (ADT) Android Device Manager (ADM)'s emulator platform crashed when started. Error log as below: Added tag(s) moreinfo. found 681758 1.2.1-2.1 Bug #681758 [nginx-extras] nginx-extras: removes files that were installed by another package Marked as found in versions nginx/1.2.1-2.1. found 681963 2.0.2-1 Bug #681963 [munin-node] munin-node: removes directories that were installed by another package: /etc/munin/plugin-conf.d/, /var/lib/munin/plugin-state/ Marked as found in versions munin/2.0.2-1. thanks Stopping processing here. Please contact me if you need assistance. -- 681742: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=681742 681758: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=681758 681963: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=681963 682386: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682386 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#659474: spamassassin: sa-compile problem on upgrade
severity 659474 normal thanks On Tue, Jul 24, 2012 at 11:30:25AM +0300, Antti-Juhani Kaijanaho wrote: On Tue, Jul 24, 2012 at 12:19:46AM -0700, Noah Meyerhans wrote: Had you enabled the cron job and run sa-compile successfully prior to the upgrade? I don't remember. I had not touched the spamassassin setup for years. [...] An interesting question is what would happen if instead of apt-get upgrade, you'd use apt-get install spamassassin after editing sources.list. That would likely expose the issue. (I may try this myself, in fact.) I've now completed this test. No errors detected. Okay, I think it's clear now that this is not a simple dependency problem and is unlikely to hit most upgraders. Hence downgrading back to normal. Looks like both the packaged cronjob and my handcrafted cronjob have been disabled in that system, so the data it tried to compile was probably very old. (Is there some way I could determine how old it is?) Interesting, though, that an upgrade to libc6-dev made it work. -- Antti-Juhani Kaijanaho, Jyväskylä, Finland http://antti-juhani.kaijanaho.fi/newblog/ http://www.flickr.com/photos/antti-juhani/ signature.asc Description: Digital signature
Processed: Re: Bug#659474: spamassassin: sa-compile problem on upgrade
Processing commands for cont...@bugs.debian.org: severity 659474 normal Bug #659474 [spamassassin] spamassassin: sa-compile problem on upgrade Severity set to 'normal' from 'serious' thanks Stopping processing here. Please contact me if you need assistance. -- 659474: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=659474 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682623: uicilibris: FTBFS: /bin/sh: 1: pyuic4: not found
Source: uicilibris Version: 1.8-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: debian/rules build dh build dh_testdir dh_auto_configure dh_auto_build make[1]: Entering directory `/«PKGBUILDDIR»' make -C uicilibris all make[2]: Entering directory `/«PKGBUILDDIR»/uicilibris' pyuic4 export.ui Ui_export.py /bin/sh: 1: pyuic4: not found make[2]: *** [Ui_export.py] Error 127 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/uicilibris_1.8-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682624: openteacher: FTBFS: subprocess.CalledProcessError: Command '['./compile_all.py']' returned non-zero exit status 1
Source: openteacher Version: 2.3-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[1]: Entering directory `/«PKGBUILDDIR»' python setup.py update running update check_call[['./compile_all.py']] processing 1 files... [###] 100% Updating 'translations/zh_TW.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/zh_CN.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/uz.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/uk.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/tr.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/sv.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/sr.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/sl.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/ru.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/ro.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/pt_BR.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/pl.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/oc.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/nl.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/nb.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/ko.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/ja.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/it.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/id.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/hu.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files... [###] 100% Updating 'translations/hr.qm'... Generated 0 translation(s) (0 finished and 0 unfinished) Ignored 208 untranslated source text(s) processing 1 files
Bug#682625: scim-tables: FTBFS: build-dependency not installable: libscim-dev (= 1.4.14)
Source: scim-tables Version: 0.5.11-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: ┌──┐ │ Install scim-tables build dependencies (apt-based resolver) │ └──┘ Installing build dependencies Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: sbuild-build-depends-scim-tables-dummy : Depends: libscim-dev (= 1.4.14) but it is not going to be installed E: Unable to correct problems, you have held broken packages. apt-get failed. The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/scim-tables_0.5.11-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682626: qct: FTBFS: /bin/sh: 1: pyuic4: not found
Source: qct Version: 1.7-3 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[1]: Entering directory `/«PKGBUILDDIR»' make[1]: Nothing to be done for `update-config'. make[1]: Leaving directory `/«PKGBUILDDIR»' cd . \ python setup.py build \ --build-base=/«PKGBUILDDIR»/./build running build running build_py creating /«PKGBUILDDIR»/build creating /«PKGBUILDDIR»/build/lib.linux-x86_64-2.7 creating /«PKGBUILDDIR»/build/lib.linux-x86_64-2.7/qctlib copying qctlib/ui_select.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib copying qctlib/ui_preferences.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib copying qctlib/ui_dialog.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib copying qctlib/changeselect.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib copying qctlib/version.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib copying qctlib/utils.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib copying qctlib/patches.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib copying qctlib/gui_logic.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib copying qctlib/__init__.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib creating /«PKGBUILDDIR»/build/lib.linux-x86_64-2.7/qctlib/vcs copying qctlib/vcs/cg.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib/vcs copying qctlib/vcs/svn.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib/vcs copying qctlib/vcs/p4.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib/vcs copying qctlib/vcs/mtn.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib/vcs copying qctlib/vcs/hg.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib/vcs copying qctlib/vcs/git.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib/vcs copying qctlib/vcs/cvs.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib/vcs copying qctlib/vcs/bzr.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib/vcs copying qctlib/vcs/__init__.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib/vcs running build_scripts creating /«PKGBUILDDIR»/build/scripts-2.7 copying and adjusting qct - /«PKGBUILDDIR»/./build/scripts-2.7 changing mode of /«PKGBUILDDIR»/./build/scripts-2.7/qct from 664 to 775 touch debian/python-module-stampdir/qct rm -f qctlib/ui_dialog.py qctlib/ui_preferences.py /usr/bin/make qctlib/ui_dialog.py qctlib/ui_preferences.py make[1]: Entering directory `/«PKGBUILDDIR»' pyuic4 qctlib/dialog.ui qctlib/ui_dialog.py /bin/sh: 1: pyuic4: not found make[1]: *** [qctlib/ui_dialog.py] Error 127 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/qct_1.7-3_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682627: ddd: FTBFS: configure hangs for 60 minutes
Source: ddd Version: 1:3.3.12-3 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: debian/rules build debian/rules:14: warning: overriding commands for target `debian/stamp-autotools-files' /usr/share/cdbs/1/class/autotools-files.mk:51: warning: ignoring old commands for target `debian/stamp-autotools-files' test -x debian/rules mkdir -p builddir if test -e /usr/share/misc/config.guess ; then \ for i in ./config.guess ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.guess $i ; \ fi ; \ done ; \ fi if test -e /usr/share/misc/config.sub ; then \ for i in ./config.sub ; do \ if ! test -e $i.cdbs-orig ; then \ mv $i $i.cdbs-orig ; \ cp --remove-destination /usr/share/misc/config.sub $i ; \ fi ; \ done ; \ fi autoreconf -vfi autoreconf: Entering directory `.' autoreconf: configure.ac: not using Gettext autoreconf: running: aclocal --force autoreconf: configure.ac: tracing autoreconf: running: libtoolize --copy --force libtoolize: putting auxiliary files in `.'. libtoolize: copying file `./ltmain.sh' libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.ac and libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree. libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am. autoreconf: running: /usr/bin/autoconf --force autoreconf: running: /usr/bin/autoheader --force autoreconf: running: automake --add-missing --copy --force-missing configure.ac:59: installing `./install-sh' configure.ac:59: installing `./missing' ddd/Makefile.am: installing `./depcomp' autoreconf: Leaving directory `.' touch debian/stamp-autotools-files chmod a+x /«PKGBUILDDIR»/./configure mkdir -p builddir cd builddirCFLAGS=-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wall -W -DNDEBUG CXXFLAGS=-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wall -W -DNDEBUG CPPFLAGS=-D_FORTIFY_SOURCE=2 LDFLAGS=-Wl,-z,relro -Wl,--as-needed RSH=rsh LPR=lpr XTERM=xterm XFONTSEL=xfontsel GCORE=gcore ice_cv_find_xp=no ac_cv_lib_Xp_XpSelectInput=no /«PKGBUILDDIR»/./configure --build=x86_64-linux-gnu --prefix=/usr --includedir=\${prefix}/include --mandir=\${prefix}/share/man --infodir=\${prefix}/share/info --sysconfdir=/etc --localstatedir=/var --libexecdir=\${prefix}/lib/ddd --disable-maintainer-mode --disable-dependency-tracking --disable-silent-rules --with-readline-libraries --disable-builtin-app-defaults --disable-builtin-manual --disable-builtin-news --disable-builtin-license --with-userinfo=Daniel Schepler schep...@debian.org configure: WARNING: unrecognized options: --disable-maintainer-mode, --disable-silent-rules checking for product name... ddd 3.3.12 Dale Head checking for expiration date... no checking build system type... x86_64-pc-linux-gnu checking host system type... x86_64-pc-linux-gnu checking target system type... x86_64-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking whether build environment is sane... yes checking for a thread-safe mkdir -p... /bin/mkdir -p checking for gawk... no checking for mawk... mawk checking whether make sets $(MAKE)... yes checking whether make sets $(MAKE)... (cached) yes checking for g77... no checking for fort77... no checking for f77... no checking for f2c... no checking whether ln -s works... yes checking for sh... /bin/sh checking for gtar... no checking for tar... tar checking for gm4... no checking for m4... m4 checking for gsed... no checking for sed... sed checking for gdiff... no checking for diff... diff checking for gzip... gzip checking for gzip... gzip checking for remsh... no checking for rsh... no checking for on... no checking for lp... lpr checking for gcore... gcore checking for compface... no checking for xbm2xface.pl... no checking for xbm2xface... no checking for gdb... no checking for wdb... no checking for dbx... no checking for ladebug... no checking for xdb... no checking for jdb... no checking for perl... perl checking for perl version greater than or equal to 5.8.0... ok checking for xterm... xterm checking for xfontsel... xfontsel checking for bison... bison -y checking for bison -y flags... checking bison -y version... 2.5 (ok) checking for style of include used by make... GNU checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler
Bug#682628: hachoir-metadata: FTBFS: ERROR: Unable to compile dialog.ui to dialog_ui.py using pyuic4
Source: hachoir-metadata Version: 1.3.3-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: debian/rules build pyversions: missing X(S)-Python-Version in control file, fall back to debian/pyversions test -x debian/rules mkdir -p . mkdir -p debian/python-module-stampdir cd . \ python setup.py build \ --build-base=/«PKGBUILDDIR»/./build ERROR: Unable to compile dialog.ui to dialog_ui.py using pyuic4 Use command setup.py build --build-base=/«PKGBUILDDIR»/./build --disable-qt to skip hachoir-metadata-qt pyuic4 is included in the PyQt4 development package make: *** [debian/python-module-stampdir/python-hachoir-metadata] Error 1 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/hachoir-metadata_1.3.3-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682629: libemail-mime-perl: FTBFS: test failed
Source: libemail-mime-perl Version: 1.910-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[1]: Entering directory `/«PKGBUILDDIR»' PERL_DL_NONLAZY=1 /usr/bin/perl -MExtUtils::Command::MM -e test_harness(0, 'blib/lib', 'blib/arch') t/*.t t/auto_create.t ... ok t/basic.t . ok t/content_id.t ok t/ct_attrs.t .. ok t/dispo.t . ok t/disposition.t ... ok t/encoding.t .. ok t/multipart.t . ok t/nested-parts.t .. ok t/part-encs.t . ok t/parts.t . ok t/perl-minver.t ... ok t/pod-coverage.t .. ok t/pod.t ... ok t/read-nested.t ... ok # Failed test 'as_string matches' # at t/singlepart.t line 43. # got: 'From: me # To: you # Subject: test # MIME-Version: 1.0 # Content-Transfer-Encoding: base64 # # ClRoaXMgaXMgbXkgc2luZ2xlcGFydCBtZXNzYWdlLgpJdCdzIGJhc2U2NCBlbmNvZGVkLgo= # ' # expected: 'From: me # To: you # Subject: test # MIME-Version: 1.0 # Content-Transfer-Encoding: base64 # # ClRoaXMgaXMgbXkgc2luZ2xlcGFydCBtZXNzYWdlLgpJdCdzIGJhc2U2NCBlbmNvZGVkLgo= # ' # Looks like you failed 1 test of 4. t/singlepart.t Dubious, test returned 1 (wstat 256, 0x100) Failed 1/4 subtests t/unicode.t ... ok t/walk-parts.t ok Test Summary Report --- t/singlepart.t (Wstat: 256 Tests: 4 Failed: 1) Failed test: 3 Non-zero exit status: 1 Files=18, Tests=173, 4 wallclock secs ( 0.51 usr 0.33 sys + 3.48 cusr 0.29 csys = 4.61 CPU) Result: FAIL Failed 1/18 test programs. 1/173 subtests failed. make[1]: *** [test_dynamic] Error 255 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/libemail-mime-perl_1.910-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682630: pysatellites: FTBFS: make[1]: pyuic4: Command not found
Source: pysatellites Version: 1.0-6 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: debian/rules build dh build --with python2 dh_testdir dh_auto_configure dh_auto_build make[1]: Entering directory `/«PKGBUILDDIR»' pyuic4 pysat.ui -o UI_pysat.py make[1]: pyuic4: Command not found make[1]: *** [UI_pysat.py] Error 127 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/pysatellites_1.0-6_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682631: linaro-image-tools: FTBFS: AttributeError: 'tuple' object has no attribute 'major'
Source: linaro-image-tools Version: 2012.06-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: debian/rules build dh build --with python2 dh_testdir dh_auto_configure dh_auto_build Traceback (most recent call last): File setup.py, line 21, in module linaro-hwpack-replace], File /usr/lib/python2.6/dist-packages/DistUtilsExtra/auto.py, line 98, in setup __requires(attrs, src_all) File /usr/lib/python2.6/dist-packages/DistUtilsExtra/auto.py, line 458, in __requires __add_imports(imports, s, attrs) File /usr/lib/python2.6/dist-packages/DistUtilsExtra/auto.py, line 383, in __add_imports if(sys.version_info.major 3): AttributeError: 'tuple' object has no attribute 'major' dh_auto_build: python2.6 setup.py build --force returned exit code 1 make: *** [build] Error 1 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/linaro-image-tools_2012.06-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682633: libemail-outlook-message-perl: FTBFS: test failed
Source: libemail-outlook-message-perl Version: 0.911-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: debian/rules build dh build dh_testdir dh_auto_configure Checking prerequisites... requires: ! IO::All is not installed ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions of the modules indicated above before proceeding with this installation Run 'Build installdeps' to install missing prerequisites. Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Email-Outlook-Message' version '0.911' dh_auto_build Building Email-Outlook-Message dh_auto_test t/basics.t ... ok t/gpg_signed.t ... ok # Failed test at t/internals.t line 87. # got: 'plain # ' # expected: 'plain # ' # Failed test at t/internals.t line 88. # got: 'html # ' # expected: 'html # ' # Looks like you failed 2 tests of 17. t/internals.t Dubious, test returned 2 (wstat 512, 0x200) Failed 2/17 subtests # Failed test 'No body' # at t/plain_jpeg_attached.t line 17. # got: ' # ' # expected: ' # ' # Failed test 'Testing body' # at t/plain_jpeg_attached.t line 29. # got: 'test # # ' # expected: 'test # # ' # Looks like you failed 2 tests of 23. t/plain_jpeg_attached.t .. Dubious, test returned 2 (wstat 512, 0x200) Failed 2/23 subtests # Failed test 'Check body' # at t/plain_uc_unsent.t line 23. # got: 'This is a test # The body is in plain text # ' # expected: 'This is a test # The body is in plain text # ' # Looks like you failed 1 test of 15. t/plain_uc_unsent.t .. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/15 subtests # Failed test 'Check body' # at t/plain_uc_wc_unsent.t line 28. Wide character in print at /usr/share/perl/5.14/Test/Builder.pm line 1759. # got: 'This is a test # The body is in p汬ain text # ' # expected: 'This is a test # The body is in p汬ain text # ' # Looks like you failed 1 test of 14. t/plain_uc_wc_unsent.t ... Dubious, test returned 1 (wstat 256, 0x100) Failed 1/14 subtests # Failed test 'Check body' # at t/plain_unsent.t line 25. # got: 'This is a test # The body is in plain text # ' # expected: 'This is a test # The body is in plain text # ' # Looks like you failed 1 test of 15. t/plain_unsent.t . Dubious, test returned 1 (wstat 256, 0x100) Failed 1/15 subtests t/pod_coverage.t . ok Test Summary Report --- t/internals.t (Wstat: 512 Tests: 17 Failed: 2) Failed tests: 16-17 Non-zero exit status: 2 t/plain_jpeg_attached.t (Wstat: 512 Tests: 23 Failed: 2) Failed tests: 9, 15 Non-zero exit status: 2 t/plain_uc_unsent.t(Wstat: 256 Tests: 15 Failed: 1) Failed test: 10 Non-zero exit status: 1 t/plain_uc_wc_unsent.t (Wstat: 256 Tests: 14 Failed: 1) Failed test: 10 Non-zero exit status: 1 t/plain_unsent.t (Wstat: 256 Tests: 15 Failed: 1) Failed test: 11 Non-zero exit status: 1 Files=8, Tests=91, 1 wallclock secs ( 0.23 usr 0.10 sys + 0.64 cusr 0.16 csys = 1.13 CPU) Result: FAIL Failed 5/8 test programs. 7/91 subtests failed. dh_auto_test: perl Build test returned exit code 255 make: *** [build] Error 255 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/libemail-outlook-message-perl_0.911-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682632: pyacidobasic: FTBFS: /bin/sh: 1: pyuic4: not found
Source: pyacidobasic Version: 2.2-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: debian/rules build dh build --with python2 dh_testdir dh_auto_configure dh_auto_build make[1]: Entering directory `/«PKGBUILDDIR»' pyuic4 main.ui | sed -e 's/^from qwt_plot/from PyQt4.Qwt5/' -e 's%\(icons/[-:a-zA-Z_0-9]*\.svg\)%/usr/share/pyacidobasic/\1%g' -e 's%../../../../../usr/share/icons%/usr/share/icons%' Ui_main.py /bin/sh: 1: pyuic4: not found pyuic4 prelevement.ui Ui_prelevement.py /bin/sh: 1: pyuic4: not found make[1]: *** [Ui_prelevement.py] Error 127 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/pyacidobasic_2.2-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682634: nautilus-image-manipulator: FTBFS: AttributeError: 'tuple' object has no attribute 'major'
Source: nautilus-image-manipulator Version: 1.1-1.1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: debian/rules build dh build --with python2 dh_testdir dh_auto_configure dh_auto_build Traceback (most recent call last): File setup.py, line 86, in module cmdclass={'install': InstallAndUpdateDataDirectory} File /usr/lib/python2.6/dist-packages/DistUtilsExtra/auto.py, line 98, in setup __requires(attrs, src_all) File /usr/lib/python2.6/dist-packages/DistUtilsExtra/auto.py, line 458, in __requires __add_imports(imports, s, attrs) File /usr/lib/python2.6/dist-packages/DistUtilsExtra/auto.py, line 383, in __add_imports if(sys.version_info.major 3): AttributeError: 'tuple' object has no attribute 'major' dh_auto_build: python2.6 setup.py build --force returned exit code 1 make: *** [build] Error 1 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/nautilus-image-manipulator_1.1-1.1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682635: dff: FTBFS: /bin/sh: 1: /usr/bin/pyuic4: not found
Source: dff Version: 1.2.0+dfsg.1-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[4]: Entering directory `/«BUILDDIR»/dff-1.2.0+dfsg.1/build-2.7' cd /«BUILDDIR»/dff-1.2.0+dfsg.1/build-2.7 /usr/bin/cmake -E cmake_depends Unix Makefiles /«BUILDDIR»/dff-1.2.0+dfsg.1 /«BUILDDIR»/dff-1.2.0+dfsg.1/ui/gui/resources /«BUILDDIR»/dff-1.2.0+dfsg.1/build-2.7 /«BUILDDIR»/dff-1.2.0+dfsg.1/build-2.7/ui/gui/resources /«BUILDDIR»/dff-1.2.0+dfsg.1/build-2.7/ui/gui/resources/CMakeFiles/ui_resources.about.ui.dir/DependInfo.cmake --color= Scanning dependencies of target ui_resources.about.ui make[4]: Leaving directory `/«BUILDDIR»/dff-1.2.0+dfsg.1/build-2.7' make -f ui/gui/resources/CMakeFiles/ui_resources.about.ui.dir/build.make ui/gui/resources/CMakeFiles/ui_resources.about.ui.dir/build make[4]: Entering directory `/«BUILDDIR»/dff-1.2.0+dfsg.1/build-2.7' cd /«BUILDDIR»/dff-1.2.0+dfsg.1/build-2.7/ui/gui/resources /usr/bin/pyuic4 -o /«BUILDDIR»/dff-1.2.0+dfsg.1/build-2.7/ui/gui/resources/ui_about.py /«BUILDDIR»/dff-1.2.0+dfsg.1/ui/gui/resources/about.ui /bin/sh: 1: /usr/bin/pyuic4: not found make[4]: *** [ui/gui/resources/CMakeFiles/ui_resources.about.ui] Error 127 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/dff_1.2.0+dfsg.1-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682637: qgis: FTBFS: /bin/sh: 1: /usr/bin/pyuic4: not found
Source: qgis Version: 1.7.4+1.7.5~20120320-1.1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[3]: Entering directory `/«BUILDDIR»/qgis-1.7.4+1.7.5~20120320/debian/build' Scanning dependencies of target pluginstaller make[3]: Leaving directory `/«BUILDDIR»/qgis-1.7.4+1.7.5~20120320/debian/build' make[3]: Entering directory `/«BUILDDIR»/qgis-1.7.4+1.7.5~20120320/debian/build' [ 95%] Generating ui_qgsplugininstallerbase.py /bin/sh: 1: /usr/bin/pyuic4: not found make[3]: *** [python/plugins/plugin_installer/ui_qgsplugininstallerbase.py] Error 127 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/qgis_1.7.4+1.7.5~20120320-1.1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682636: racket: FTBFS: raco setup: error: during making for scribblings/tools
Source: racket Version: 5.2.1+g6~92c8784+dfsg2-2 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[5]: Entering directory `/«BUILDDIR»/racket-5.2.1+g6~92c8784+dfsg2/build' if [ /«BUILDDIR»/racket-5.2.1+g6~92c8784+dfsg2/debian/tmp = ]; then \ echo /usr/lib; \ fi make[5]: Leaving directory `/«BUILDDIR»/racket-5.2.1+g6~92c8784+dfsg2/build' make[4]: Leaving directory `/«BUILDDIR»/racket-5.2.1+g6~92c8784+dfsg2/build' make[3]: Leaving directory `/«BUILDDIR»/racket-5.2.1+g6~92c8784+dfsg2/build' env CFLAGS=-g -O2 -fstack-protector --param=ssp-buffer-size=4 -Wformat -Werror=format-security -Wall -Wall -D_FORTIFY_SOURCE=2 -pthread LDFLAGS=-Wl,-z,relro -pthread racket/racket3m -X /«BUILDDIR»/racket-5.2.1+g6~92c8784+dfsg2/debian/tmp/usr/share/racket/collects -N raco setup -l- setup -j 10 --no-launcher --no-install --no-post-install --no-user raco setup: bootstrapping from source... raco setup: version: 5.2.1 [3m] raco setup: variants: 3m raco setup: main collects: /«BUILDDIR»/racket-5.2.1+g6~92c8784+dfsg2/debian/tmp/usr/share/racket/collects raco setup: collects paths: raco setup: /«BUILDDIR»/racket-5.2.1+g6~92c8784+dfsg2/debian/tmp/usr/share/racket/collects raco setup: --- compiling collections --- raco setup: making: racket raco setup: in racket raco setup: in mzlib raco setup: in scheme raco setup: in racket/snip/private raco setup: in file raco setup: in racket/draw/private raco setup: in ffi/unsafe raco setup: in racket/draw/unsafe raco setup: in ffi raco setup: in racket/draw raco setup: in scheme/lang raco setup: in racket/gui raco setup: in mred raco setup: in mred/private raco setup: in mred/private/wx raco setup: in mred/private/wx/common raco setup: in mred/private/wxme raco setup: --- parallel build using 10 processes --- raco setup: 9 making: compiler raco setup: 8 making: raco raco setup: 7 making: racket raco setup: 6 making: 2htdp (HtDP/2e Teachpacks) raco setup: 5 making: algol60 raco setup: 4 making: at-exp raco setup: 4 making: at-exp/lang raco setup: 3 making: browser raco setup: 2 making: combinator-parser raco setup: 1 making: config raco setup: 0 making: data raco setup: 2 making: combinator-parser/private-combinator raco setup: 4 making: datalog raco setup: 7 making: racket/unsafe raco setup: 7 making: racket/unit raco setup: 7 making: racket/unit/lang raco setup: 7 making: racket/snip raco setup: 7 making: racket/snip/private raco setup: 7 making: racket/snip/private/compiled raco setup: 7 making: racket/signature raco setup: 7 making: racket/signature/lang raco setup: 7 making: racket/private raco setup: 8 making: db raco setup: 7 making: racket/private/lang raco setup: 7 making: racket/match raco setup: 7 making: racket/load raco setup: 7 making: racket/load/lang raco setup: 7 making: racket/lang raco setup: 7 making: racket/gui raco setup: 0 making: data/tests raco setup: 2 making: defaults raco setup: 2 making: deinprogramm (DeinProgramm) raco setup: 7 making: racket/gui/lang raco setup: 7 making: racket/draw raco setup: 7 making: racket/draw/compiled raco setup: 7 making: racket/draw/unsafe raco setup: 7 making: racket/draw/unsafe/compiled raco setup: 7 making: racket/draw/private raco setup: 7 making: racket/draw/private/compiled raco setup: 7 making: racket/contract raco setup: 7 making: racket/contract/private raco setup: 7 making: racket/base raco setup: 7 making: racket/base/lang raco setup: 7 making: drracket raco setup: 4 making: datalog/tool raco setup: 9 making: compiler/private raco setup: 9 making: compiler/demodularizer raco setup: 5 making: algol60/lang raco setup: 8 making: db/util raco setup: 9 making: compiler/commands raco setup: 9 making: dynext raco setup: 9 making: dynext/private raco setup: 1 making: embedded-gui raco setup: 5 making: algol60/examples raco setup: 5 making: eopl raco setup: 9 making: errortrace raco setup: 9 making: errortrace/scribblings raco setup: 9 making: errortrace/private raco setup: 5 making: eopl/private raco setup: 9 making: errortrace/lang raco setup: 9 making: ffi raco setup: 4 making: datalog/sexp raco setup: 4 making: datalog/sexp/lang raco setup: 5 making: eopl/lang raco setup: 4 making: datalog/scribblings raco setup: 4 making: datalog/private raco setup: 4 making: datalog/lang raco setup: 5 making: file raco setup: 9 making: ffi/unsafe raco setup: 9 making: ffi/unsafe/compiled raco setup: 9 making: framework raco setup: 0 making: data/scribblings raco setup: 4 making: frtime (FrTime) raco setup: 5 making: file/tests raco setup: 5 making: file/scribblings raco setup: 0 making: games raco setup: 5 making: file/private raco setup: 5 making: graphics raco setup: 6 making: 2htdp
Bug#682639: tunnelx: FTBFS: xargs: /usr/lib/jvm/default-java/bin/javac: No such file or directory
Source: tunnelx Version: 20110801-4 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[1]: Entering directory `/«PKGBUILDDIR»' jh_build -o-source 1.5 find src -name *.java -and -type f -print0 | xargs -0 /usr/lib/jvm/default-java/bin/javac -cp /usr/share/java/j3dcore.jar:/usr/share/java/j3dutils.jar:/usr/share/java/vecmath.jar:debian/_jh_build.tunnelx -d debian/_jh_build.tunnelx -source 1.5 xargs: /usr/lib/jvm/default-java/bin/javac: No such file or directory make[1]: *** [override_jh_build] Error 1 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/tunnelx_20110801-4_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682641: pycode-browser: FTBFS: LyX: Creating directory /sbuild-nonexistent/.lyx/
Source: pycode-browser Version: 20120614+git+b041dd2-2 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: debian/rules build dh build --with python2 dh_testdir dh_auto_configure dh_auto_build make[1]: Entering directory `/«BUILDDIR»/pycode-browser-20120614+git+b041dd2' make -C pybooksrc all DESTDIR= make[2]: Entering directory `/«BUILDDIR»/pycode-browser-20120614+git+b041dd2/pybooksrc' lyx --export latex mapy.lyx LyX: Creating directory /sbuild-nonexistent/.lyx/ Failed to create directory. Exiting. ../../../src/support/lassert.cpp(35): ASSERTION pimpl_-application_.get() VIOLATED IN ../../src/LyX.cpp:462 make[2]: *** [mapy.tex] Error 1 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/pycode-browser_20120614+git+b041dd2-2_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682642: code-saturne: FTBFS: /bin/bash: /usr/bin/pyuic4: /usr/bin/python3: bad interpreter: No such file or directory
Source: code-saturne Version: 2.1.7-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[3]: Entering directory `/«PKGBUILDDIR»/gui' Making all in Base make[4]: Entering directory `/«PKGBUILDDIR»/gui/Base' /usr/bin/pyuic4 -o BrowserForm.py BrowserForm.ui /bin/bash: /usr/bin/pyuic4: /usr/bin/python3: bad interpreter: No such file or directory make[4]: *** [BrowserForm.py] Error 126 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/code-saturne_2.1.7-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682643: citadel: FTBFS: build-dependency not installable: libcitadel-dev (= 8.14)
Source: citadel Version: 8.14-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: ┌──┐ │ Install citadel build dependencies (apt-based resolver) │ └──┘ Installing build dependencies Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: sbuild-build-depends-citadel-dummy : Depends: libcitadel-dev (= 8.14) but it is not going to be installed E: Unable to correct problems, you have held broken packages. apt-get failed. The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/citadel_8.14-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682644: flightgear: FTBFS: build-dependency not installable: simgear-dev (= 2.6.0-1)
Source: flightgear Version: 2.6.0-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: ┌──┐ │ Install flightgear build dependencies (apt-based resolver) │ └──┘ Installing build dependencies Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: sbuild-build-depends-flightgear-dummy : Depends: simgear-dev (= 2.6.0-1) but it is not going to be installed E: Unable to correct problems, you have held broken packages. apt-get failed. The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/flightgear_2.6.0-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682645: pymecavideo: FTBFS: /bin/sh: 1: pyuic4: not found
Source: pymecavideo Version: 6.0-5 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[3]: Entering directory `/«PKGBUILDDIR»/lang' make[3]: *** No rule to make target `all'. Stop. make[3]: Leaving directory `/«PKGBUILDDIR»/lang' make[3]: Entering directory `/«PKGBUILDDIR»/src' pyuic4 pymecavideo.ui Ui_pymecavideo.py /bin/sh: 1: pyuic4: not found make[3]: *** [Ui_pymecavideo.py] Error 127 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/pymecavideo_6.0-5_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682646: weborf: FTBFS: sh: 1: pyuic4: not found
Source: weborf Version: 0.13-3 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_installdirs debian/rules override_dh_auto_install make[1]: Entering directory `/«PKGBUILDDIR»' pyuic4 qweborf/main.ui qweborf/main.py sh: 1: pyuic4: not found make[1]: *** [override_dh_auto_install] Error 127 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/weborf_0.13-3_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682648: python-gnupg: FTBFS: test hangs for 60 mins
Source: python-gnupg Version: 0.3.0-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[1]: Entering directory `/«PKGBUILDDIR»' set -ex; for py in 2.7 2.6; do \ PYTHONPATH=/«PKGBUILDDIR»/build/lib.*-$py python$py test_gnupg.py ;\ done + PYTHONPATH=/«PKGBUILDDIR»/build/lib.*-2.7 python2.7 test_gnupg.py test_deletion (__main__.GPGTestCase) Test that key deletion works ... ok test_encryption_and_decryption (__main__.GPGTestCase) Test that encryption and decryption works ... ok test_environment (__main__.GPGTestCase) Test the environment by ensuring that setup worked ... ok test_file_encryption_and_decryption (__main__.GPGTestCase) Test that encryption/decryption to/from file works ... ok test_import_and_export (__main__.GPGTestCase) Test that key import and export works ... ok test_import_only (__main__.GPGTestCase) Test that key import works ... ok test_list_keys_after_generation (__main__.GPGTestCase) Test that after key generation, the generated key is available ... ok test_list_keys_initial (__main__.GPGTestCase) Test that initially there are no keys ... ok test_nogpg (__main__.GPGTestCase) Test that absence of gpg is handled correctly ... ok test_signature_verification (__main__.GPGTestCase) Test that signing and verification works ... make: *** wait: No child processes. Stop. make: *** Waiting for unfinished jobs make: *** wait: No child processes. Stop. make[1]: *** [override_dh_auto_test] Terminated E: Caught signal 'Terminated': terminating immediately Build killed with signal TERM after 60 minutes of inactivity Build finished at 20120724-0327 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/python-gnupg_0.3.0-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682650: feel++: FTBFS: -- Could NOT find GMSH (missing: GMSH_INCLUDE_DIR GMSH_LIBRARY)
Source: feel++ Version: 0.91.4-3 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[1]: Entering directory `/build/feel++-ulH7c2/feel++-0.91.4' make[1]: Nothing to be done for `update-config'. make[1]: Leaving directory `/build/feel++-ulH7c2/feel++-0.91.4' cd obj-x86_64-linux-gnu cmake /build/feel++-ulH7c2/feel++-0.91.4/. -DCMAKE_INSTALL_PREFIX=/usr -DCMAKE_C_COMPILER:FILEPATH=cc -DCMAKE_CXX_COMPILER:FILEPATH=/usr/bin/g++-4.6 -DCMAKE_C_FLAGS= -D_FORTIFY_SOURCE=2 -DCMAKE_CXX_FLAGS= -D_FORTIFY_SOURCE=2 -DCMAKE_SKIP_RPATH=ON -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_CXX_COMPILER=/usr/bin/g++-4.6 -DCMAKE_BUILD_TYPE=Release -DCMAKE_CXX_FLAGS_RELEASE=-O2 -DNDEBUG -g0 -DPETSC_ARCH=linux-gnu-c-opt -DPETSC_DIR=/usr/lib/petscdir/3.2 -DPETSC_EXECUTABLE_RUNS=ON -DFEELPP_ENABLE_TRILINOS=OFF -DFEELPP_ENABLE_APPLICATIONS=OFF -DFEELPP_ENABLE_APPLICATIONS_CRB=ON -DFEELPP_ENABLE_BENCHMARKS=OFF -DFEELPP_ENABLE_TESTS=OFF -DFEELPP_ENABLE_EXAMPLES=OFF -DFEELPP_OPUS_ENABLE_EADS=ON -DBUILD_TESTING=OFF -DFEELPP_ENABLE_DOCUMENTATION=ON -DFEELPP_MINIMAL_CONFIGURATION=ON -DTRILINOS_LIB_NOXLAPACK= -DFEELPP_ENABLE_INSTANTIATION_MODE=OFF /build/feel++-ulH7c2/feel++-0.91.4/. -- The C compiler identification is GNU 4.7.1 -- The CXX compiler identification is GNU 4.6.3 -- The Fortran compiler identification is GNU -- Check for working C compiler: /usr/bin/cc -- Check for working C compiler: /usr/bin/cc -- works -- Detecting C compiler ABI info -- Detecting C compiler ABI info - done -- Check for working CXX compiler: /usr/bin/g++-4.6 -- Check for working CXX compiler: /usr/bin/g++-4.6 -- works -- Detecting CXX compiler ABI info -- Detecting CXX compiler ABI info - done -- Check for working Fortran compiler: /usr/bin/gfortran -- Check for working Fortran compiler: /usr/bin/gfortran -- works -- Detecting Fortran compiler ABI info -- Detecting Fortran compiler ABI info - done -- Checking whether /usr/bin/gfortran supports Fortran 90 -- Checking whether /usr/bin/gfortran supports Fortran 90 -- yes -- Could NOT find Subversion (missing: Subversion_SVN_EXECUTABLE) -- Could NOT find Git (missing: GIT_EXECUTABLE) -- [feel++] Global flags: -std=c++0x -pedantic -ftemplate-depth-256 -Wno-inline -Wall -Wno-unused -Wno-sign-compare -- [feel++] Debug flags: -std=c++0x -pedantic -g -ftemplate-depth-256 -Wno-inline -- [feel++] Release flags: -std=c++0x -pedantic -g0 -O2 -DNDEBUG -ftemplate-depth-256 -finline-functions -Wno-inline -- Looking for sys/types.h -- Looking for sys/types.h - found -- Looking for stdint.h -- Looking for stdint.h - found -- Looking for stddef.h -- Looking for stddef.h - found -- Check size of int -- Check size of int - done -- Check size of uint -- Check size of uint - done -- Check size of size_t -- Check size of size_t - done -- Check size of long -- Check size of long - done -- Check size of float -- Check size of float - done -- Check size of double -- Check size of double - done -- Check size of long double -- Check size of long double - done -- SIZE_INT=4 -- SIZE_UINT=4 -- SIZE_SIZE_T=8 -- SIZE_LONG=8 -- SIZE_FLOAT=4 -- SIZE_DOUBLE=8 -- SIZE_LONG_DOUBLE=16 -- Try OpenMP C flag = [-fopenmp] -- Performing Test OpenMP_FLAG_DETECTED -- Performing Test OpenMP_FLAG_DETECTED - Success -- Try OpenMP CXX flag = [-fopenmp] -- Performing Test OpenMP_FLAG_DETECTED -- Performing Test OpenMP_FLAG_DETECTED - Success -- Found OpenMP: -fopenmp -- Found MPI_C: /usr/lib/openmpi/lib/libmpi.so;/usr/lib/openmpi/lib/libopen-rte.so;/usr/lib/openmpi/lib/libopen-pal.so;/usr/lib/x86_64-linux-gnu/libdl.so;/usr/lib/x86_64-linux-gnu/libnsl.so;/usr/lib/x86_64-linux-gnu/libutil.so;/usr/lib/x86_64-linux-gnu/libm.so;/usr/lib/x86_64-linux-gnu/libdl.so -- Found MPI_CXX: /usr/lib/openmpi/lib/libmpi_cxx.so;/usr/lib/openmpi/lib/libmpi.so;/usr/lib/openmpi/lib/libopen-rte.so;/usr/lib/openmpi/lib/libopen-pal.so;/usr/lib/x86_64-linux-gnu/libdl.so;/usr/lib/x86_64-linux-gnu/libnsl.so;/usr/lib/x86_64-linux-gnu/libutil.so;/usr/lib/x86_64-linux-gnu/libm.so;/usr/lib/x86_64-linux-gnu/libdl.so -- Found MPI_Fortran: /usr/lib/openmpi/lib/libmpi_f90.so;/usr/lib/openmpi/lib/libmpi_f77.so;/usr/lib/openmpi/lib/libmpi.so;/usr/lib/openmpi/lib/libopen-rte.so;/usr/lib/openmpi/lib/libopen-pal.so;/usr/lib/x86_64-linux-gnu/libdl.so;/usr/lib/x86_64-linux-gnu/libnsl.so;/usr/lib/x86_64-linux-gnu/libutil.so;/usr/lib/x86_64-linux-gnu/libm.so;/usr/lib/x86_64-linux-gnu/libdl.so -- Looking for C++ include dlfcn.h -- Looking for C++ include dlfcn.h - found -- Looking for dlopen in dl -- Looking for dlopen in dl - found -- Found LibXml2: /usr/lib/x86_64-linux-gnu/libxml2.so (found version 2.8.0) -- Looking for Fortran sgemm -- Looking for Fortran sgemm - found -- Looking
Bug#682651: webcit: FTBFS: unsatisfiable build-dependencies: libcitadel-dev (= 8.14)
Source: webcit Version: 8.14-dfsg-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: ┌──┐ │ Install webcit build dependencies (apt-based resolver) │ └──┘ Installing build dependencies Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have E: Unable to correct problems, you have held broken packages. requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: sbuild-build-depends-webcit-dummy : Depends: libcitadel-dev (= 8.14) but it is not going to be installed apt-get failed. The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/webcit_8.14-dfsg-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processed: found 680481 in 0.2.0-1, fixed 680481 in 0.2.0-2, affects 680481
Processing commands for cont...@bugs.debian.org: found 680481 0.2.0-1 Bug #680481 {Done: Alexander Zangerl a...@snafu.priv.at} [vmware-manager] vmm and vmware-manager: error when trying to install together Marked as found in versions vmware-manager/0.2.0-1 and reopened. fixed 680481 0.2.0-2 Bug #680481 [vmware-manager] vmm and vmware-manager: error when trying to install together Marked as fixed in versions vmware-manager/0.2.0-2. affects 680481 + vmm Bug #680481 [vmware-manager] vmm and vmware-manager: error when trying to install together Added indication that 680481 affects vmm thanks Stopping processing here. Please contact me if you need assistance. -- 680481: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680481 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#680790: libio-async-loop-epoll-perl: FTBFS: tests failed
On 09/07/12 at 13:45 -0600, gregor herrmann wrote: tag 680790 + unreproducible thanks # Failed test 'One -loop_once(1) sufficient for a single 0.1 second timer' # at /usr/share/perl5/IO/Async/LoopTests.pm line 481. # got: '2' # expected: '1' # Looks like you failed 1 test of 26. t/02loop-timer.t Dubious, test returned 1 (wstat 256, 0x100) Failed 1/26 subtests I tried this test several times now, also under heavy load, and I can't reproduce the failing so far. Strange: it just failed again, and this seems to be reproducible. I can provide access to an Amazon virtual machine where the failure is reproducible, if you want. Lucas -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#680481: closed by Alexander Zangerl a...@snafu.priv.at (vmware-manager cleanup)
i've renamed vmm to vwm in version 0.2.0-2, but made a typo in the closes: changelog entry, so i'm closing the bug with this separate mail. I fixed up the found/fixed versions so that this shows as a RC bug in wheezy. You need to file an unblock request to get the fixed version into testing: reportbug release.debian.org Andreas -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processed: closing 680481
Processing commands for cont...@bugs.debian.org: close 680481 Bug #680481 [vmware-manager] vmm and vmware-manager: error when trying to install together Marked Bug as done thanks Stopping processing here. Please contact me if you need assistance. -- 680481: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=680481 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#651204: CVE-2011-4405 fixed in wheezy, not in squeeze
On Tue, Jul 24, 2012 at 10:09:27AM +0200, Didier 'OdyX' Raboud wrote: tags 651204 +patch thanks Le mercredi, 30 mai 2012 11.47:05, Thijs Kinkhorst a écrit : Hi, Wheezy and sid contain a patch for this issue. Squeeze seems still affected. Are you able to provide an updated package for squeeze? Would the attached patch do the job for Squeeze? It looks good to me. I didn't get around to implement something similar since ages since I didn't have a test system to run this on. Could you test this on a Squeeze box? If so I'd be happy about an NMU. Cheers, -- Guido OdyX From: Till Kamppeter till.kamppe...@gmail.com Date: Tue, 13 Dec 2011 20:54:26 +0100 Subject: Fix MITM via unencrypted metadata download Adapted to Squeeze by Didier Raboud o...@debian.org on Tue Jul 24 10:09:16 CEST 2012. Closes: #651204 --- cupshelpers/openprinting.py | 35 +++ 1 files changed, 23 insertions(+), 12 deletions(-) --- a/cupshelpers/openprinting.py +++ b/cupshelpers/openprinting.py @@ -19,7 +19,7 @@ ## along with this program; if not, write to the Free Software ## Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -import urllib, httplib, platform, threading, tempfile, traceback +import pycurl,urllib, httplib, platform, threading, tempfile, traceback import os, sys from xml.etree.ElementTree import XML from . import Device @@ -42,10 +42,18 @@ self.parameters = parameters self.callback = callback self.user_data = user_data +self.result = self.setDaemon (True) def run (self): + +# Callback function for pycURL collecting the data coming from +# the web server +def collect_data(result): +self.result += result; +return len(result) + # CGI script to be executed query_command = /query.cgi # Headers for the post request @@ -55,26 +63,26 @@ (urllib.urlencode (self.parameters), self.parent.language[0], self.parent.language[0])) -self.url = http://%s%s?%s; % (self.parent.base_url, query_command, params) +self.url = https://%s%s?%s; % (self.parent.base_url, query_command, params) # Send request -result = None +self.result = status = 1 try: -conn = httplib.HTTPConnection(self.parent.base_url) -conn.request(POST, query_command, params, headers) -resp = conn.getresponse() -status = resp.status -if status == 200: -result = resp.read() -conn.close() +curl = pycurl.Curl() +curl.setopt(pycurl.SSL_VERIFYPEER, 1) +curl.setopt(pycurl.SSL_VERIFYHOST, 2) +curl.setopt(pycurl.WRITEFUNCTION, collect_data) +curl.setopt(pycurl.URL, self.url) +status = curl.perform() +if status == None: status = 0 +if (status != 0): +self.result = sys.exc_info () except: -result = sys.exc_info () - -if status == 200: -status = 0 +self.result = sys.exc_info () +if status == None: status = 0 if self.callback != None: -self.callback (status, self.user_data, result) +self.callback (status, self.user_data, self.result) class OpenPrinting: def __init__(self, language=None): -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#662198: marked as done (libcvc3-5-dev and libcvc3-2-dev: error when trying to install together)
Your message dated Tue, 24 Jul 2012 12:52:12 +0200 with message-id 500e7e5c.9020...@abeckmann.de and subject line closing, fixed long ago in 2.4.1-3 has caused the Debian Bug report #662198, regarding libcvc3-5-dev and libcvc3-2-dev: error when trying to install together to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 662198: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=662198 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: libcvc3-2-dev,libcvc3-5-dev Version: libcvc3-2-dev/2.2-13.1 Version: libcvc3-5-dev/2.4.1-2 Severity: serious User: trei...@debian.org Usertags: edos-file-overwrite Date: 2012-03-04 Architecture: amd64 Distribution: sid Hi, automatic installation tests of packages that share a file and at the same time do not conflict by their package dependency relationships has detected the following problem: WARNING: The following packages cannot be authenticated! libgmp10 libcvc3-2 libcvc3-2-dev libcvc3-5 libcvc3-5-dev Authentication warning overridden. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously unselected package libgmp10. (Reading database ... 10548 files and directories currently installed.) Unpacking libgmp10 (from .../libgmp10_2%3a5.0.4+dfsg-1_amd64.deb) ... Selecting previously unselected package libcvc3-2. Unpacking libcvc3-2 (from .../libcvc3-2_2.2-13.1_amd64.deb) ... Selecting previously unselected package libcvc3-2-dev. Unpacking libcvc3-2-dev (from .../libcvc3-2-dev_2.2-13.1_amd64.deb) ... Selecting previously unselected package libcvc3-5. Unpacking libcvc3-5 (from .../libcvc3-5_2.4.1-2_amd64.deb) ... Selecting previously unselected package libcvc3-5-dev. Unpacking libcvc3-5-dev (from .../libcvc3-5-dev_2.4.1-2_amd64.deb) ... dpkg: error processing /var/cache/apt/archives/libcvc3-5-dev_2.4.1-2_amd64.deb (--unpack): trying to overwrite '/usr/lib/pkgconfig/cvc3.pc', which is also in package libcvc3-2-dev 2.2-13.1 configured to not write apport reports dpkg-deb: error: subprocess paste was killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/libcvc3-5-dev_2.4.1-2_amd64.deb E: Sub-process /usr/bin/dpkg returned an error code (1) This is a serious bug as it makes installation fail, and violates sections 7.6.1 and 10.1 of the policy. An optimal solution would consist in only one of the packages installing that file, and renaming or removing the file in the other package. Depending on the circumstances you might also consider Replace relations or file diversions. If the conflicting situation cannot be resolved then, as a last resort, the two packages have to declare a mutual Conflict. Please take into account that Replaces, Conflicts and diversions should only be used when packages provide different implementations for the same functionality. Here is a list of files that are known to be shared by both packages (according to the Contents file for sid/amd64, which may be slightly out of sync): /usr/include/cvc3/assumptions.h /usr/include/cvc3/c_interface.h /usr/include/cvc3/c_interface_defs.h /usr/include/cvc3/cdflags.h /usr/include/cvc3/cdlist.h /usr/include/cvc3/cdmap.h /usr/include/cvc3/cdmap_ordered.h /usr/include/cvc3/cdo.h /usr/include/cvc3/circuit.h /usr/include/cvc3/clause.h /usr/include/cvc3/cnf.h /usr/include/cvc3/cnf_manager.h /usr/include/cvc3/command_line_exception.h /usr/include/cvc3/command_line_flags.h /usr/include/cvc3/common_proof_rules.h /usr/include/cvc3/compat_hash_map.h /usr/include/cvc3/compat_hash_set.h /usr/include/cvc3/context.h /usr/include/cvc3/cvc_util.h /usr/include/cvc3/debug.h /usr/include/cvc3/dpllt.h /usr/include/cvc3/dpllt_basic.h /usr/include/cvc3/dpllt_minisat.h /usr/include/cvc3/eval_exception.h /usr/include/cvc3/exception.h /usr/include/cvc3/expr.h /usr/include/cvc3/expr_hash.h /usr/include/cvc3/expr_manager.h /usr/include/cvc3/expr_map.h /usr/include/cvc3/expr_op.h /usr/include/cvc3/expr_stream.h /usr/include/cvc3/expr_transform.h /usr/include/cvc3/expr_value.h /usr/include/cvc3/fdstream.h /usr/include/cvc3/formula_value.h /usr/include/cvc3/hash_fun.h /usr/include/cvc3/hash_map.h /usr/include/cvc3/hash_set.h /usr/include/cvc3/hash_table.h /usr/include/cvc3/kinds.h /usr/include/cvc3/lang.h /usr/include/cvc3/memory_manager.h /usr/include/cvc3/memory_manager_chunks.h /usr/include/cvc3/memory_manager_context.h /usr/include/cvc3/memory_manager_malloc.h /usr/include/cvc3/notifylist.h /usr/include/cvc3/os.h /usr/include/cvc3/parser.h
Bug#662200: marked as done (libcvc3-5-jni and libcvc3-2-jni: error when trying to install together)
Your message dated Tue, 24 Jul 2012 12:52:12 +0200 with message-id 500e7e5c.9020...@abeckmann.de and subject line closing, fixed long ago in 2.4.1-3 has caused the Debian Bug report #662200, regarding libcvc3-5-jni and libcvc3-2-jni: error when trying to install together to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 662200: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=662200 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: libcvc3-2-jni,libcvc3-5-jni Version: libcvc3-2-jni/2.2-13.1 Version: libcvc3-5-jni/2.4.1-2 Severity: serious User: trei...@debian.org Usertags: edos-file-overwrite Date: 2012-03-04 Architecture: amd64 Distribution: sid Hi, automatic installation tests of packages that share a file and at the same time do not conflict by their package dependency relationships has detected the following problem: WARNING: The following packages cannot be authenticated! libkeyutils1 libkrb5support0 libk5crypto3 libkrb5-3 libgssapi-krb5-2 libavahi-common-data libavahi-common3 libdbus-1-3 libavahi-client3 libcups2 libfreetype6 libgmp10 libjpeg8 libnspr4-0d libnss3-1d openjdk-6-jre-lib openssl ca-certificates java-common default-jre-headless ca-certificates-java tzdata-java openjdk-6-jre-headless libcvc3-2 libcvc3-2-jni libcvc3-5 libcvc3-5-jni Preconfiguring packages ... Authentication warning overridden. Can not write log, openpty() failed (/dev/pts not mounted?) Selecting previously unselected package libkeyutils1. (Reading database ... 10548 files and directories currently installed.) Unpacking libkeyutils1 (from .../libkeyutils1_1.5.2-2_amd64.deb) ... Selecting previously unselected package libkrb5support0. Unpacking libkrb5support0 (from .../libkrb5support0_1.10+dfsg~beta1-2_amd64.deb) ... Selecting previously unselected package libk5crypto3. Unpacking libk5crypto3 (from .../libk5crypto3_1.10+dfsg~beta1-2_amd64.deb) ... Selecting previously unselected package libkrb5-3. Unpacking libkrb5-3 (from .../libkrb5-3_1.10+dfsg~beta1-2_amd64.deb) ... Selecting previously unselected package libgssapi-krb5-2. Unpacking libgssapi-krb5-2 (from .../libgssapi-krb5-2_1.10+dfsg~beta1-2_amd64.deb) ... Selecting previously unselected package libavahi-common-data. Unpacking libavahi-common-data (from .../libavahi-common-data_0.6.31-1_amd64.deb) ... Selecting previously unselected package libavahi-common3. Unpacking libavahi-common3 (from .../libavahi-common3_0.6.31-1_amd64.deb) ... Selecting previously unselected package libdbus-1-3. Unpacking libdbus-1-3 (from .../libdbus-1-3_1.4.18-1_amd64.deb) ... Selecting previously unselected package libavahi-client3. Unpacking libavahi-client3 (from .../libavahi-client3_0.6.31-1_amd64.deb) ... Selecting previously unselected package libcups2. Unpacking libcups2 (from .../libcups2_1.5.2-5_amd64.deb) ... Selecting previously unselected package libfreetype6. Unpacking libfreetype6 (from .../libfreetype6_2.4.8-1_amd64.deb) ... Selecting previously unselected package libgmp10. Unpacking libgmp10 (from .../libgmp10_2%3a5.0.4+dfsg-1_amd64.deb) ... Selecting previously unselected package libjpeg8. Unpacking libjpeg8 (from .../libjpeg8_8d-1_amd64.deb) ... Selecting previously unselected package libnspr4-0d. Unpacking libnspr4-0d (from .../libnspr4-0d_4.9-1_amd64.deb) ... Selecting previously unselected package libnss3-1d. Unpacking libnss3-1d (from .../libnss3-1d_3.13.3-1_amd64.deb) ... Selecting previously unselected package openjdk-6-jre-lib. Unpacking openjdk-6-jre-lib (from .../openjdk-6-jre-lib_6b24-1.11.1-3_all.deb) ... Selecting previously unselected package openssl. Unpacking openssl (from .../openssl_1.0.0g-1_amd64.deb) ... Selecting previously unselected package ca-certificates. Unpacking ca-certificates (from .../ca-certificates_20120212_all.deb) ... Selecting previously unselected package java-common. Unpacking java-common (from .../java-common_0.47_all.deb) ... Selecting previously unselected package default-jre-headless. Unpacking default-jre-headless (from .../default-jre-headless_1%3a1.6-47_amd64.deb) ... Selecting previously unselected package ca-certificates-java. Unpacking ca-certificates-java (from .../ca-certificates-java_20120225_all.deb) ... Selecting previously unselected package tzdata-java. Unpacking tzdata-java (from .../tzdata-java_2011n-2_all.deb) ... Selecting previously unselected package openjdk-6-jre-headless. Unpacking openjdk-6-jre-headless (from .../openjdk-6-jre-headless_6b24-1.11.1-3_amd64.deb) ... Selecting previously unselected package libcvc3-2. Unpacking libcvc3-2 (from
Bug#682656: debian-installer-netboot-images: file conflicts between debian-installer-{6, 7}.0-netboot-arch
Source: debian-installer-netboot-images Version: 20120712 Severity: serious Justification: file overwrite conflicts Hi, debian-installer-6.0-netboot-arch and debian-installer-7.0-netboot-arch are not co-installable because they ship the same files, but don#t have corresponding conflicts. Since they already provide the debian-installer-netboot-arch virtual package, adding Conflicts/Replaces in that virtual package, too, should be trivial. Andreas -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682656: debian-installer-netboot-images: file conflicts between debian-installer-{6, 7}.0-netboot-arch
Le mardi, 24 juillet 2012 13.17:10, Andreas Beckmann a écrit : debian-installer-6.0-netboot-arch and debian-installer-7.0-netboot-arch are not co-installable because they ship the same files, but don#t have corresponding conflicts. Indeed, thanks for your report. Since they already provide the debian-installer-netboot-arch virtual package, adding Conflicts/Replaces in that virtual package, too, should be trivial. That, or release-number-specify the paths; I'm not yet decided [0,1]. Opinions? Cheers, OdyX [0] http://lists.debian.org/debian-boot/2012/07/msg00074.html [1] http://lists.debian.org/debian-boot/2012/07/msg00428.html -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682644: marked as done (flightgear: FTBFS: build-dependency not installable: simgear-dev (= 2.6.0-1))
Your message dated Tue, 24 Jul 2012 13:12:55 +0200 with message-id 500e8337.6090...@arcticnet.no and subject line Re: [pkg-fgfs-crew] Bug#682644: flightgear: FTBFS: build-dependency not installable: simgear-dev (= 2.6.0-1) has caused the Debian Bug report #682644, regarding flightgear: FTBFS: build-dependency not installable: simgear-dev (= 2.6.0-1) to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 682644: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682644 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Source: flightgear Version: 2.6.0-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: ┌──┐ │ Install flightgear build dependencies (apt-based resolver) │ └──┘ Installing build dependencies Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: sbuild-build-depends-flightgear-dummy : Depends: simgear-dev (= 2.6.0-1) but it is not going to be installed E: Unable to correct problems, you have held broken packages. apt-get failed. The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/flightgear_2.6.0-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. ---End Message--- ---BeginMessage--- On 24. juli 2012 11:38, Lucas Nussbaum wrote: Source: flightgear Version: 2.6.0-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: ┌──┐ │ Install flightgear build dependencies (apt-based resolver) │ └──┘ Out of curiosity, are these bugs automatically or manually filed? In either case, it doesn't seem useful to file a bug report because of a build dependency that's sitting in ftp-master's NEW queue, since there's not much the package maintainer can or should do about it (short of just not uploading the dependent package at the same time as its dependencies, I suppose, but delaying is not always convenient for a volunteer maintainer, and might *also* cause temporary brokenness since flightgear 2.4 should not be built with simgear 2.6 - and besides, once everything's uploaded, it's too late to do anything about). If this is automatic, is there any way to also automatically check the NEW queue?---End Message---
Bug#679454: Switching to 2.6 is the wrong answer
* Scott Kitterman deb...@kitterman.com [2012-07-24 06:39]: All you have to do is make sure you catch the attribute error at these two lines: gwibber/gwui.py:if gwibber not in urlparse.uses_query: gwibber/gwui.py: urlparse.uses_query.append(gwibber) if urlparse.uses_qwery doesn't exist (as it doesn't in the 2.7.3 in unstable). You are of course right. However, we are working on packaging a new upstream version. That won't have that problem anyway. Thanks, -- David Riebenbauer Jabber: davr...@jabber.ccc.de - ICQ: 322056002 http://liegesta.at -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processed: Re: Bug#682629: libemail-mime-perl: FTBFS: test failed
Processing control commands: tags 682629 + confirmed Bug #682629 [src:libemail-mime-perl] libemail-mime-perl: FTBFS: test failed Added tag(s) confirmed. -- 682629: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682629 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682629: libemail-mime-perl: FTBFS: test failed
Control: tags 682629 + confirmed Hi Lucas On Tue, Jul 24, 2012 at 11:44:20AM +0200, Lucas Nussbaum wrote: Source: libemail-mime-perl Version: 1.910-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[1]: Entering directory `/«PKGBUILDDIR»' PERL_DL_NONLAZY=1 /usr/bin/perl -MExtUtils::Command::MM -e test_harness(0, 'blib/lib', 'blib/arch') t/*.t t/auto_create.t ... ok t/basic.t . ok t/content_id.t ok t/ct_attrs.t .. ok t/dispo.t . ok t/disposition.t ... ok t/encoding.t .. ok t/multipart.t . ok t/nested-parts.t .. ok t/part-encs.t . ok t/parts.t . ok t/perl-minver.t ... ok t/pod-coverage.t .. ok t/pod.t ... ok t/read-nested.t ... ok # Failed test 'as_string matches' # at t/singlepart.t line 43. # got: 'From: me # To: you # Subject: test # MIME-Version: 1.0 # Content-Transfer-Encoding: base64 # # ClRoaXMgaXMgbXkgc2luZ2xlcGFydCBtZXNzYWdlLgpJdCdzIGJhc2U2NCBlbmNvZGVkLgo= # ' # expected: 'From: me # To: you # Subject: test # MIME-Version: 1.0 # Content-Transfer-Encoding: base64 # # ClRoaXMgaXMgbXkgc2luZ2xlcGFydCBtZXNzYWdlLgpJdCdzIGJhc2U2NCBlbmNvZGVkLgo= # ' # Looks like you failed 1 test of 4. t/singlepart.t Dubious, test returned 1 (wstat 256, 0x100) Failed 1/4 subtests t/unicode.t ... ok t/walk-parts.t ok Test Summary Report --- t/singlepart.t (Wstat: 256 Tests: 4 Failed: 1) Failed test: 3 Non-zero exit status: 1 Files=18, Tests=173, 4 wallclock secs ( 0.51 usr 0.33 sys + 3.48 cusr 0.29 csys = 4.61 CPU) Result: FAIL Failed 1/18 test programs. 1/173 subtests failed. make[1]: *** [test_dynamic] Error 255 Confirmed, it FTBFS in unstable, but not in wheezy. Unstable recently updated libemail-simple-perl: Revision history for Perl extension Email::Simple. 2.102 2012-07-13 recognize crlf correctly even if there is no body (thanks, Christian Walde) But I have not yet investigated if this is the cause. Regards, Salvatore signature.asc Description: Digital signature
Bug#682644: [pkg-fgfs-crew] Bug#682644: flightgear: FTBFS: build-dependency not installable: simgear-dev (= 2.6.0-1)
On 24/07/12 at 13:12 +0200, Ove Kåven wrote: On 24. juli 2012 11:38, Lucas Nussbaum wrote: Source: flightgear Version: 2.6.0-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: ┌──┐ │ Install flightgear build dependencies (apt-based resolver) │ └──┘ Out of curiosity, are these bugs automatically or manually filed? In either case, it doesn't seem useful to file a bug report because of a build dependency that's sitting in ftp-master's NEW queue, since there's not much the package maintainer can or should do about it (short of just not uploading the dependent package at the same time as its dependencies, I suppose, but delaying is not always convenient for a volunteer maintainer, and might *also* cause temporary brokenness since flightgear 2.4 should not be built with simgear 2.6 - and besides, once everything's uploaded, it's too late to do anything about). If this is automatic, is there any way to also automatically check the NEW queue? it's manual Lucas -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682656: debian-installer-netboot-images: file conflicts between debian-installer-{6, 7}.0-netboot-arch
Didier 'OdyX' Raboud o...@debian.org writes: Le mardi, 24 juillet 2012 13.17:10, Andreas Beckmann a écrit : debian-installer-6.0-netboot-arch and debian-installer-7.0-netboot-arch are not co-installable because they ship the same files, but don#t have corresponding conflicts. Indeed, thanks for your report. Since they already provide the debian-installer-netboot-arch virtual package, adding Conflicts/Replaces in that virtual package, too, should be trivial. That, or release-number-specify the paths; I'm not yet decided [0,1]. Opinions? I'd prefer to have them co-installable. It's not uncommon to have one install server which serves installation images for different Debian releases. Gaudenz Cheers, OdyX [0] http://lists.debian.org/debian-boot/2012/07/msg00074.html [1] http://lists.debian.org/debian-boot/2012/07/msg00428.html -- To UNSUBSCRIBE, email to debian-boot-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/201207241338.00341.o...@debian.org -- Ever tried. Ever failed. No matter. Try again. Fail again. Fail better. ~ Samuel Beckett ~ -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processed: tagging 682629
Processing commands for cont...@bugs.debian.org: tags 682629 + confirmed Bug #682629 [src:libemail-mime-perl] libemail-mime-perl: FTBFS: test failed Ignoring request to alter tags of bug #682629 to the same tags previously set thanks Stopping processing here. Please contact me if you need assistance. -- 682629: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682629 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682629: libemail-mime-perl: FTBFS: test failed
On Tue, Jul 24, 2012 at 03:02:43PM +0200, Salvatore Bonaccorso wrote: Control: tags 682629 + confirmed Hi Lucas On Tue, Jul 24, 2012 at 11:44:20AM +0200, Lucas Nussbaum wrote: Source: libemail-mime-perl Version: 1.910-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[1]: Entering directory `/«PKGBUILDDIR»' PERL_DL_NONLAZY=1 /usr/bin/perl -MExtUtils::Command::MM -e test_harness(0, 'blib/lib', 'blib/arch') t/*.t t/auto_create.t ... ok t/basic.t . ok t/content_id.t ok t/ct_attrs.t .. ok t/dispo.t . ok t/disposition.t ... ok t/encoding.t .. ok t/multipart.t . ok t/nested-parts.t .. ok t/part-encs.t . ok t/parts.t . ok t/perl-minver.t ... ok t/pod-coverage.t .. ok t/pod.t ... ok t/read-nested.t ... ok # Failed test 'as_string matches' # at t/singlepart.t line 43. # got: 'From: me # To: you # Subject: test # MIME-Version: 1.0 # Content-Transfer-Encoding: base64 # # ClRoaXMgaXMgbXkgc2luZ2xlcGFydCBtZXNzYWdlLgpJdCdzIGJhc2U2NCBlbmNvZGVkLgo= # ' # expected: 'From: me # To: you # Subject: test # MIME-Version: 1.0 # Content-Transfer-Encoding: base64 # # ClRoaXMgaXMgbXkgc2luZ2xlcGFydCBtZXNzYWdlLgpJdCdzIGJhc2U2NCBlbmNvZGVkLgo= # ' # Looks like you failed 1 test of 4. t/singlepart.t Dubious, test returned 1 (wstat 256, 0x100) Failed 1/4 subtests t/unicode.t ... ok t/walk-parts.t ok Test Summary Report --- t/singlepart.t (Wstat: 256 Tests: 4 Failed: 1) Failed test: 3 Non-zero exit status: 1 Files=18, Tests=173, 4 wallclock secs ( 0.51 usr 0.33 sys + 3.48 cusr 0.29 csys = 4.61 CPU) Result: FAIL Failed 1/18 test programs. 1/173 subtests failed. make[1]: *** [test_dynamic] Error 255 Confirmed, it FTBFS in unstable, but not in wheezy. Unstable recently updated libemail-simple-perl: Revision history for Perl extension Email::Simple. 2.102 2012-07-13 recognize crlf correctly even if there is no body (thanks, Christian Walde) But I have not yet investigated if this is the cause. Verified. Indeed it builds with libemail-simple-perl 2.101-1 but FTBFS with 2.102-1. Regards, Salvatore signature.asc Description: Digital signature
Processed: tagging 682629
Processing commands for cont...@bugs.debian.org: tags 682629 - wheezy Bug #682629 [src:libemail-mime-perl] libemail-mime-perl: FTBFS: test failed Removed tag(s) wheezy. thanks Stopping processing here. Please contact me if you need assistance. -- 682629: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682629 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processed: severity of 682666 is grave
Processing commands for cont...@bugs.debian.org: severity 682666 grave Bug #682666 [php5-xcache] php5-xcache: XCache with xcache.size enabled crashes after a while Severity set to 'grave' from 'important' thanks Stopping processing here. Please contact me if you need assistance. -- 682666: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682666 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#679617: marked as done (not working octave bindings)
Your message dated Tue, 24 Jul 2012 14:47:47 + with message-id e1stgop-0003jq...@franck.debian.org and subject line Bug#679617: fixed in nlopt 2.2.4+dfsg-2 has caused the Debian Bug report #679617, regarding not working octave bindings to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 679617: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679617 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: octave-nlopt Version: 2.2.4+dfsg-1 Severity: grave This issue was reported in closed ITP bugreport #610623. But after accepting buggy package in Debian --- test script (tutorial example from upstream wiki) fails as before: $ octave -q ./tutorial.m error: invalid use of script /usr/share/octave/site/m/nlopt_optimize.m in index expression error: called from: error: /home/sk/nlopt-test/tutorial.m at line 22, column 24 PS: Test suite (nlopt-test.tgz) was attached to #610623. ---End Message--- ---BeginMessage--- Source: nlopt Source-Version: 2.2.4+dfsg-2 We believe that the bug you reported is fixed in the latest version of nlopt, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 679...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Christophe Trophime christophe.troph...@lncmi.cnrs.fr (supplier of updated nlopt package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Wed, 27 Jun 2012 12:05:11 +0200 Source: nlopt Binary: libnlopt0 libnlopt-dev python-nlopt octave-nlopt libnlopt-guile0 Architecture: source amd64 Version: 2.2.4+dfsg-2 Distribution: unstable Urgency: low Maintainer: Debian Science Maintainers debian-science-maintain...@lists.alioth.debian.org Changed-By: Christophe Trophime christophe.troph...@lncmi.cnrs.fr Description: libnlopt-dev - nonlinear optimization library - development files libnlopt-guile0 - guile plugins for nlopt libnlopt0 - nonlinear optimization library octave-nlopt - nlopt for octave python-nlopt - python bindings for nlopt Closes: 679617 679619 Changes: nlopt (2.2.4+dfsg-2) unstable; urgency=low . [Sergey B Kirpichev] * Install libnlopt_guile.so (Closes: #679619) * Add multiarch support . [ Rafael Laboissiere ] * debian/rules: - Install the .oct file in the appropriate directory (Closes: #679617) . * Add Sergey B Kirpichev skirpic...@gmail.com to Uploaders Checksums-Sha1: f3a1f40e46fdf21990dc71bdb4b4bac9dd2518de 1734 nlopt_2.2.4+dfsg-2.dsc 9a4e652843988340fd6576e57a9dc97c59d24c86 10751 nlopt_2.2.4+dfsg-2.debian.tar.gz 363e442b9fd5ccc77540a9679b3c3381970567b6 211038 libnlopt0_2.2.4+dfsg-2_amd64.deb f60bc7445785b20a6b178239f3468899a80302bd 220990 libnlopt-dev_2.2.4+dfsg-2_amd64.deb b1a13045b88fe53e06a99afecd0fdd8f1f8a30cc 194650 python-nlopt_2.2.4+dfsg-2_amd64.deb 03fb1bedd595cc232fbc29538142986d8dd124b1 59482 octave-nlopt_2.2.4+dfsg-2_amd64.deb e4eb8304a5e3d58c7cce233d57b39f3accc940b9 128374 libnlopt-guile0_2.2.4+dfsg-2_amd64.deb Checksums-Sha256: 6dfc470ae492acc66d03201447790c0d047ab5795078dbb9060ad0e3b6c26186 1734 nlopt_2.2.4+dfsg-2.dsc 72fb886f7eed61241e44018264418f9e814994f6d49dd19c2a1379f3bcfd0ad9 10751 nlopt_2.2.4+dfsg-2.debian.tar.gz 61808b20218c3ef947121cc800e565ccb2e610ed941cdf05f2aefacdb2d31ed0 211038 libnlopt0_2.2.4+dfsg-2_amd64.deb 1002288e1622590fcf50efc1aaca00e7dbc044c01564b327bbd0b4d166a78640 220990 libnlopt-dev_2.2.4+dfsg-2_amd64.deb 9b7218778e54bf90499a0736c8822a9c7ebb8c9fe3b0bb4f834ae8adf9675345 194650 python-nlopt_2.2.4+dfsg-2_amd64.deb 69137cb67d37ab7cc3204c6f7c62dd09c045e9e4cb99f50fd87c2cef8659ac13 59482 octave-nlopt_2.2.4+dfsg-2_amd64.deb 165a5fb0fd445025e2b93fd5be81d13a909eeddf4e4f5cbca6e8871fc7a17804 128374 libnlopt-guile0_2.2.4+dfsg-2_amd64.deb Files: 5244c87b8793d93a5afd4c27f7f8f583 1734 math extra nlopt_2.2.4+dfsg-2.dsc 2d2622054f75fd68b946acfc0a6ae451 10751 math extra nlopt_2.2.4+dfsg-2.debian.tar.gz e61ae6b3db6bc0c9402d0f923eae4eb8 211038 libs extra libnlopt0_2.2.4+dfsg-2_amd64.deb 797628cdc0d256c7965af30f69fb8ea2 220990 libdevel extra libnlopt-dev_2.2.4+dfsg-2_amd64.deb d94471c4034c85bd9811e9d1201fc0f9 194650 python extra python-nlopt_2.2.4+dfsg-2_amd64.deb
Bug#679619: marked as done (not working guile bindings)
Your message dated Tue, 24 Jul 2012 14:47:47 + with message-id e1stgop-0003jt...@franck.debian.org and subject line Bug#679619: fixed in nlopt 2.2.4+dfsg-2 has caused the Debian Bug report #679619, regarding not working guile bindings to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 679619: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679619 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: libnlopt-guile0 Version: 2.2.4+dfsg-1 Severity: grave This issue was reported in closed ITP #610623. $ guile ./tutorial.scm ERROR: In procedure dynamic-link: ERROR: file: libnlopt_guile.so, message: file not found Test suite (tutorial examples from upstream wiki, nlopt-test.tgz) was attached to #610623. PS: Why include new package in Debian, if you even not try to test one? ---End Message--- ---BeginMessage--- Source: nlopt Source-Version: 2.2.4+dfsg-2 We believe that the bug you reported is fixed in the latest version of nlopt, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 679...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Christophe Trophime christophe.troph...@lncmi.cnrs.fr (supplier of updated nlopt package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Wed, 27 Jun 2012 12:05:11 +0200 Source: nlopt Binary: libnlopt0 libnlopt-dev python-nlopt octave-nlopt libnlopt-guile0 Architecture: source amd64 Version: 2.2.4+dfsg-2 Distribution: unstable Urgency: low Maintainer: Debian Science Maintainers debian-science-maintain...@lists.alioth.debian.org Changed-By: Christophe Trophime christophe.troph...@lncmi.cnrs.fr Description: libnlopt-dev - nonlinear optimization library - development files libnlopt-guile0 - guile plugins for nlopt libnlopt0 - nonlinear optimization library octave-nlopt - nlopt for octave python-nlopt - python bindings for nlopt Closes: 679617 679619 Changes: nlopt (2.2.4+dfsg-2) unstable; urgency=low . [Sergey B Kirpichev] * Install libnlopt_guile.so (Closes: #679619) * Add multiarch support . [ Rafael Laboissiere ] * debian/rules: - Install the .oct file in the appropriate directory (Closes: #679617) . * Add Sergey B Kirpichev skirpic...@gmail.com to Uploaders Checksums-Sha1: f3a1f40e46fdf21990dc71bdb4b4bac9dd2518de 1734 nlopt_2.2.4+dfsg-2.dsc 9a4e652843988340fd6576e57a9dc97c59d24c86 10751 nlopt_2.2.4+dfsg-2.debian.tar.gz 363e442b9fd5ccc77540a9679b3c3381970567b6 211038 libnlopt0_2.2.4+dfsg-2_amd64.deb f60bc7445785b20a6b178239f3468899a80302bd 220990 libnlopt-dev_2.2.4+dfsg-2_amd64.deb b1a13045b88fe53e06a99afecd0fdd8f1f8a30cc 194650 python-nlopt_2.2.4+dfsg-2_amd64.deb 03fb1bedd595cc232fbc29538142986d8dd124b1 59482 octave-nlopt_2.2.4+dfsg-2_amd64.deb e4eb8304a5e3d58c7cce233d57b39f3accc940b9 128374 libnlopt-guile0_2.2.4+dfsg-2_amd64.deb Checksums-Sha256: 6dfc470ae492acc66d03201447790c0d047ab5795078dbb9060ad0e3b6c26186 1734 nlopt_2.2.4+dfsg-2.dsc 72fb886f7eed61241e44018264418f9e814994f6d49dd19c2a1379f3bcfd0ad9 10751 nlopt_2.2.4+dfsg-2.debian.tar.gz 61808b20218c3ef947121cc800e565ccb2e610ed941cdf05f2aefacdb2d31ed0 211038 libnlopt0_2.2.4+dfsg-2_amd64.deb 1002288e1622590fcf50efc1aaca00e7dbc044c01564b327bbd0b4d166a78640 220990 libnlopt-dev_2.2.4+dfsg-2_amd64.deb 9b7218778e54bf90499a0736c8822a9c7ebb8c9fe3b0bb4f834ae8adf9675345 194650 python-nlopt_2.2.4+dfsg-2_amd64.deb 69137cb67d37ab7cc3204c6f7c62dd09c045e9e4cb99f50fd87c2cef8659ac13 59482 octave-nlopt_2.2.4+dfsg-2_amd64.deb 165a5fb0fd445025e2b93fd5be81d13a909eeddf4e4f5cbca6e8871fc7a17804 128374 libnlopt-guile0_2.2.4+dfsg-2_amd64.deb Files: 5244c87b8793d93a5afd4c27f7f8f583 1734 math extra nlopt_2.2.4+dfsg-2.dsc 2d2622054f75fd68b946acfc0a6ae451 10751 math extra nlopt_2.2.4+dfsg-2.debian.tar.gz e61ae6b3db6bc0c9402d0f923eae4eb8 211038 libs extra libnlopt0_2.2.4+dfsg-2_amd64.deb 797628cdc0d256c7965af30f69fb8ea2 220990 libdevel extra libnlopt-dev_2.2.4+dfsg-2_amd64.deb d94471c4034c85bd9811e9d1201fc0f9 194650 python extra python-nlopt_2.2.4+dfsg-2_amd64.deb d371259137858d385046a3e525772131 59482 math extra octave-nlopt_2.2.4+dfsg-2_amd64.deb 8f4bded1d903ff1e7bd05ba0652a1adc
Bug#659155: Hangs when trying to add a new printer
Hi all, I had the same problem today on my fresh Wheezy install: Trying to add a new printer in KDE's system-config-printer-kde makes the dialog hang forever. The solution was to add the user to the group lpadmin: usermod -a -G lpadmin MyUser I had to logout/login from KDE, then adding a new printer worked fine. Same solution as for bug #659155. Issue is also discussed in bug #680195. Regards,Helmar. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processed: reassign
Processing commands for cont...@bugs.debian.org: reassign #682646 pyqt4-dev-tools Bug #682646 [src:weborf] weborf: FTBFS: sh: 1: pyuic4: not found Bug reassigned from package 'src:weborf' to 'pyqt4-dev-tools'. No longer marked as found in versions weborf/0.13-3. Ignoring request to alter fixed versions of bug #682646 to the same values previously set retitle #682646 pyuic4 should use python, not python3 Bug #682646 [pyqt4-dev-tools] weborf: FTBFS: sh: 1: pyuic4: not found Changed Bug title to 'pyuic4 should use python, not python3' from 'weborf: FTBFS: sh: 1: pyuic4: not found' thank you Stopping processing here. Please contact me if you need assistance. -- 682646: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682646 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682685: libglib-2.0: claws-mail segfault
Package: libglib2.0-0 Version: 2.32.3-1 Severity: grave File: libglib-2.0 Justification: renders package unusable Dear Maintainer, * What led up to the situation? Launch claws-mail, and it crashes during or after retrieving email, when attempting to select or read messages. syslog error shows: debian kernel: [ 2652.847067] claws-mail[3355]: segfault at 0 ip 7fb0568f6e50 sp 7fff3756d7a8 error 4 in libglib-2.0.so.0.3200.3[7fb0568bc000+f5000] This is v3.8.1 of claws-mail if that makes a difference. It was working until Sat the 21st, filed a bug report with claws which was just closed saying it's not their bug. I originally had this happen on Debian wheezy desktop install, and set up a virtual machine with LXDE only installed and the same problem occurred. Filing this from the vm. -- System Information: Debian Release: wheezy/sid APT prefers testing APT policy: (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 3.2.0-3-amd64 (SMP w/1 CPU core) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages libglib2.0-0:amd64 depends on: ii libc6 2.13-33 ii libffi53.0.10-3 ii libpcre3 1:8.30-5 ii libselinux12.1.9-5 ii multiarch-support 2.13-33 ii zlib1g 1:1.2.7.dfsg-13 Versions of packages libglib2.0-0:amd64 recommends: ii libglib2.0-data 2.32.3-1 ii shared-mime-info 1.0-1 libglib2.0-0:amd64 suggests no packages. -- no debconf information -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682637: qgis: FTBFS: /bin/sh: 1: /usr/bin/pyuic4: not found
reassign 682637 pyqt4-dev-tools thanks This is a problem of current pyuic4 which is trying to use python3 On Tue, Jul 24, 2012 at 11:40:38AM +0200, Lucas Nussbaum wrote: Source: qgis Version: 1.7.4+1.7.5~20120320-1.1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[3]: Entering directory `/«BUILDDIR»/qgis-1.7.4+1.7.5~20120320/debian/build' Scanning dependencies of target pluginstaller make[3]: Leaving directory `/«BUILDDIR»/qgis-1.7.4+1.7.5~20120320/debian/build' make[3]: Entering directory `/«BUILDDIR»/qgis-1.7.4+1.7.5~20120320/debian/build' [ 95%] Generating ui_qgsplugininstallerbase.py /bin/sh: 1: /usr/bin/pyuic4: not found make[3]: *** [python/plugins/plugin_installer/ui_qgsplugininstallerbase.py] Error 127 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/qgis_1.7.4+1.7.5~20120320-1.1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. ___ Pkg-grass-devel mailing list pkg-grass-de...@lists.alioth.debian.org http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/pkg-grass-devel -- Francesco P. Lovergine -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processed: Re: Bug#682637: qgis: FTBFS: /bin/sh: 1: /usr/bin/pyuic4: not found
Processing commands for cont...@bugs.debian.org: reassign 682637 pyqt4-dev-tools Bug #682637 [src:qgis] qgis: FTBFS: /bin/sh: 1: /usr/bin/pyuic4: not found Bug reassigned from package 'src:qgis' to 'pyqt4-dev-tools'. No longer marked as found in versions qgis/1.7.4+1.7.5~20120320-1.1. Ignoring request to alter fixed versions of bug #682637 to the same values previously set thanks Stopping processing here. Please contact me if you need assistance. -- 682637: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682637 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processed: tagging 682636
Processing commands for cont...@bugs.debian.org: tags 682636 + unreproducible Bug #682636 [src:racket] racket: FTBFS: raco setup: error: during making for scribblings/tools Added tag(s) unreproducible. thanks Stopping processing here. Please contact me if you need assistance. -- 682636: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682636 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682636: racket: FTBFS: raco setup: error: during making for scribblings/tools
Lucas Nussbaum lu...@lucas-nussbaum.net writes: Justification: FTBFS on amd64 raco setup: error: during making for scribblings/tools raco setup: link: module mismatch, probably from old bytecode whose dependencies have changed: variable not provided (directly or indirectly and at the expected position) from module: /«BUILDDIR»/racket-5.2.1+g6~92c8784+dfsg2/debian/tmp/usr/share/racket/collects/images/private/flomap-struct.rkt accessed from module: /«BUILDDIR»/racket-5.2.1+g6~92c8784+dfsg2/debian/tmp/usr/share/racket/collects/images/private/flomap-convert.rkt at source phase level: 0 in: generated-contract147.36 Hi Lucas, Thanks for the report. I can't replicate this build failure in an up to date sid chroot on amd64. I built twice using sbuild, once sequentially and once with -j10 d -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#670633: Hello
Hello my dear, How are you today? I hope fine. My Name Linda. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#670633: Hello
Hello my dear, How are you today? I hope fine. My Name Linda. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682691: [mysql-workbench] When quit MySQL Workbench, it get freezed
Package: mysql-workbench Version: 5.2.40+dfsg-1+b1 Severity: serious --- Please enter the report below this line. --- When I click in the menu: File / Exit or hit Ctrl+Q the MySQL Workbench get frozen. --- System information. --- Architecture: amd64 Kernel: Linux 3.2.0-3-amd64 Debian Release: wheezy/sid 500 unstablewww.debian-multimedia.org 500 unstableftp.debian.org 500 testing www.debian-multimedia.org 500 testing ftp.debian.org 500 stable dl.google.com --- Package information. --- Depends (Version) | Installed =-+-=== libatk1.0-0 (= 1.12.4) | 2.4.0-2 libatkmm-1.6-1(= 2.22.1) | 2.22.6-1 libc6(= 2.4) | 2.13-35 libcairo2 (= 1.7.2) | 1.12.2-2 libcairomm-1.0-1 (= 1.6.4) | 1.10.0-1 libctemplate2 | 2.2-3 libfontconfig1 (= 2.9.0) | 2.9.0-6 libfreetype6 (= 2.2.1) | 2.4.9-1 libgcc1 (= 1:4.1.1) | 1:4.7.1-5 libgdk-pixbuf2.0-0(= 2.22.0) | 2.26.1-1 libgl1-mesa-glx | 8.0.3-1 OR libgl1| libglib2.0-0 (= 2.31.8) | 2.32.3-1 libglibmm-2.4-1c2a (= 2.31.22) | 2.32.0-1 libgnome-keyring0 (= 2.22.2) | 3.4.1-1 libgtk2.0-0 (= 2.24.0) | 2.24.10-1 libgtkmm-2.4-1c2a (= 1:2.24.0) | 1:2.24.2-1 liblua5.1-0 | 5.1.5-4 libmysqlclient18 (= 5.5.24+dfsg-1) | 5.5.24+dfsg-5 libpango1.0-0 (= 1.18.0) | 1.30.0-1 libpangomm-1.4-1 (= 2.27.1) | 2.28.4-1 libpcre3(= 8.10) | 1:8.30-5 libpython2.7 (= 2.7) | 2.7.3-2 libsigc++-2.0-0c2a (= 2.0.2) | 2.2.10-0.2 libsqlite3-0 (= 3.5.9) | 3.7.13-1 libstdc++6 (= 4.6) | 4.7.1-5 libtinyxml2.6.2 | 2.6.2-1 libuuid1(= 2.16) | 2.20.1-5.1 libx11-6 | 2:1.5.0-1 libxml2(= 2.7.4) | 2.8.0+dfsg1-5 libzip2 (= 0.10) | 0.10.1-1.1 zlib1g (= 1:1.1.4) | 1:1.2.7.dfsg-13 python (= 2.6.6-7~) | 2.7.3-1 python2.7 | 2.7.3-2 mysql-workbench-data(= 5.2.40+dfsg-1) | 5.2.40+dfsg-1 mysql-client | 5.5.24+dfsg-5 python-mysql.connector| 0.3.2-1 python-paramiko | 1.7.7.1-3 python-pysqlite2 | 2.6.3-3 python-pexpect| 2.4-1 Recommends (Version) | Installed =-+-=== ttf-bitstream-vera| 1.10-8 mysql-utilities | 1.0.5-1 Suggests (Version) | Installed -+-=== gnome-keyring| 3.4.1-4 -- Regards from Pal -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682650: feel++: FTBFS: -- Could NOT find GMSH (missing: GMSH_INCLUDE_DIR GMSH_LIBRARY)
tags 682650 + pending thanks Should be fixed in rev.45277 Anton -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processed: Re: Bug#682650: feel++: FTBFS: -- Could NOT find GMSH (missing: GMSH_INCLUDE_DIR GMSH_LIBRARY)
Processing commands for cont...@bugs.debian.org: tags 682650 + pending Bug #682650 [src:feel++] feel++: FTBFS: -- Could NOT find GMSH (missing: GMSH_INCLUDE_DIR GMSH_LIBRARY) Added tag(s) pending. thanks Stopping processing here. Please contact me if you need assistance. -- 682650: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682650 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682203: marked as done (Multiple security issues)
Your message dated Tue, 24 Jul 2012 17:47:14 + with message-id e1stjcu-00072f...@franck.debian.org and subject line Bug#682203: fixed in moodle 2.2.3.dfsg-2.2 has caused the Debian Bug report #682203, regarding Multiple security issues to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 682203: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682203 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: moodle Severity: grave Tags: security Please see http://www.openwall.com/lists/oss-security/2012/07/17/1 for details and links to patches. Remember that Wheezy is frozen, so please fix this by uploading isolated fixes instead of updating to a new upstream release. Cheers, Moritz ---End Message--- ---BeginMessage--- Source: moodle Source-Version: 2.2.3.dfsg-2.2 We believe that the bug you reported is fixed in the latest version of moodle, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 682...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Didier Raboud o...@debian.org (supplier of updated moodle package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA256 Format: 1.8 Date: Mon, 23 Jul 2012 19:13:56 +0200 Source: moodle Binary: moodle Architecture: source all Version: 2.2.3.dfsg-2.2 Distribution: unstable Urgency: low Maintainer: Moodle Packaging Team pkg-moodle-maintain...@lists.alioth.debian.org Changed-By: Didier Raboud o...@debian.org Description: moodle - course management system for online learning Closes: 682203 Changes: moodle (2.2.3.dfsg-2.2) unstable; urgency=low . * Non-maintainer upload. . * Backport multiple security issues from upstream's MOODLE_22_STABLE branch. (Closes: #682203) - MDL-31692 mod_lti - ensure that various mforms are used properly Fixes CVE-2012-3389 - MDL-33916 Ensure that capabilities are checked for cached user enrolments Fixes CVE-2012-3388 Checksums-Sha1: 2c929bca9c51e1ca04a3aa0bbda1efd8c1cfeb52 1875 moodle_2.2.3.dfsg-2.2.dsc 6c995e57f610b710bacce928ccea8a93f5bb96f9 31349 moodle_2.2.3.dfsg-2.2.debian.tar.gz 661a4a000e58f86c821de3bbefd5505c0830b769 16279786 moodle_2.2.3.dfsg-2.2_all.deb Checksums-Sha256: 6bf035431af239ace275669650843e85b0359f8a6dcc442fd12de7e37c6aa9e5 1875 moodle_2.2.3.dfsg-2.2.dsc 22d99c665810f927ad7b5df3fe9dd16f2476be237c8524135f10e394491e57ea 31349 moodle_2.2.3.dfsg-2.2.debian.tar.gz b0f6fba1604643d727e250bcc67eddc7e4102aa3b20aacd0f09ab56680605f57 16279786 moodle_2.2.3.dfsg-2.2_all.deb Files: 411ce516b10519d4c18683d7fd95a2f7 1875 web optional moodle_2.2.3.dfsg-2.2.dsc bfac20abbd48be3a72f72293394ae82d 31349 web optional moodle_2.2.3.dfsg-2.2.debian.tar.gz 0bd3439764243325c812ecfa0e578db5 16279786 web optional moodle_2.2.3.dfsg-2.2_all.deb -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.12 (GNU/Linux) iQGcBAEBCAAGBQJQDYpkAAoJEIvPpx7KFjRVKLQL/2cc4HnzuDTpJEDI7uc+ivvQ MPMjQuUizIlnS4Ded7yjQfoji7Sp+TzQIVegBtl6uKCnGSzsciBoSKb9ZEdrvRC7 DZGuANc12YCLVVHUhdIssW3jHB/kWwE+ybSzatPWcNNYrTFRDxp4v+q5eDZDcQT6 VSX7O6G3cvXMZuS/askIZTwdjiy799J61fSMhCcz1RR3lmu1fZkaekb2fMHYiSQW q5HKTtQItZjAyUqvCfiBRhAYQT/V8ZYWPJsrLdRQ1s5rRsODxLVU/UTV2u+PlQ8B 3C6u/DLaABfMq/hBP6J2/tNgL7LMzPWQloYpU8ajDnxTNxf7Ay4pINgQTe5fc2Gp yKkNVyPoOGm5uvn3se0UEaMLO2J5meZFIFNBEH9Z0jZ4qB9dX9q55GGk46FxLq95 OYRNzprT0G4OOCE35so7qTURJtCBtAnel9WtFc25xVQOAISKv3LLfQQeCotk8uLL KGw+0jUYbryCh4ZYH+oMeUyiXBFyNeZvJjuolWrYiw== =u0Eh -END PGP SIGNATUREEnd Message---
Processed: reassign 682642 to pyqt4-dev-tools, reassign 682635 to pyqt4-dev-tools ...
Processing commands for cont...@bugs.debian.org: reassign 682642 pyqt4-dev-tools 4.9.3-3 Bug #682642 [src:code-saturne] code-saturne: FTBFS: /bin/bash: /usr/bin/pyuic4: /usr/bin/python3: bad interpreter: No such file or directory Bug reassigned from package 'src:code-saturne' to 'pyqt4-dev-tools'. No longer marked as found in versions code-saturne/2.1.7-1. Ignoring request to alter fixed versions of bug #682642 to the same values previously set Bug #682642 [pyqt4-dev-tools] code-saturne: FTBFS: /bin/bash: /usr/bin/pyuic4: /usr/bin/python3: bad interpreter: No such file or directory Marked as found in versions python-qt4/4.9.3-3. reassign 682635 pyqt4-dev-tools Bug #682635 [src:dff] dff: FTBFS: /bin/sh: 1: /usr/bin/pyuic4: not found Bug reassigned from package 'src:dff' to 'pyqt4-dev-tools'. No longer marked as found in versions dff/1.2.0+dfsg.1-1. Ignoring request to alter fixed versions of bug #682635 to the same values previously set reassign 682632 pyqt4-dev-tools Bug #682632 [src:pyacidobasic] pyacidobasic: FTBFS: /bin/sh: 1: pyuic4: not found Bug reassigned from package 'src:pyacidobasic' to 'pyqt4-dev-tools'. No longer marked as found in versions pyacidobasic/2.2-1. Ignoring request to alter fixed versions of bug #682632 to the same values previously set reassign 682645 pyqt4-dev-tools Bug #682645 [src:pymecavideo] pymecavideo: FTBFS: /bin/sh: 1: pyuic4: not found Bug reassigned from package 'src:pymecavideo' to 'pyqt4-dev-tools'. No longer marked as found in versions pymecavideo/6.0-5. Ignoring request to alter fixed versions of bug #682645 to the same values previously set reassign 682630 pyqt4-dev-tools Bug #682630 [src:pysatellites] pysatellites: FTBFS: make[1]: pyuic4: Command not found Bug reassigned from package 'src:pysatellites' to 'pyqt4-dev-tools'. No longer marked as found in versions pysatellites/1.0-6. Ignoring request to alter fixed versions of bug #682630 to the same values previously set reassign 682626 pyqt4-dev-tools Bug #682626 [src:qct] qct: FTBFS: /bin/sh: 1: pyuic4: not found Bug reassigned from package 'src:qct' to 'pyqt4-dev-tools'. No longer marked as found in versions qct/1.7-3. Ignoring request to alter fixed versions of bug #682626 to the same values previously set reassign 682638 pyqt4-dev-tools Bug #682638 [src:scolasync] scolasync: FTBFS: /bin/sh: 1: pyuic4: not found Bug reassigned from package 'src:scolasync' to 'pyqt4-dev-tools'. No longer marked as found in versions scolasync/3.1-1. Ignoring request to alter fixed versions of bug #682638 to the same values previously set reassign 682623 pyqt4-dev-tools Bug #682623 [src:uicilibris] uicilibris: FTBFS: /bin/sh: 1: pyuic4: not found Bug reassigned from package 'src:uicilibris' to 'pyqt4-dev-tools'. No longer marked as found in versions uicilibris/1.8-1. Ignoring request to alter fixed versions of bug #682623 to the same values previously set reassign 682646 pyqt4-dev-tools Bug #682646 [pyqt4-dev-tools] pyuic4 should use python, not python3 Ignoring request to reassign bug #682646 to the same package reassign 682649 pyqt4-dev-tools Bug #682649 [src:yade] yade: FTBFS: sh: 1: pyuic4: not found Bug reassigned from package 'src:yade' to 'pyqt4-dev-tools'. No longer marked as found in versions yade/0.80.1-2. Ignoring request to alter fixed versions of bug #682649 to the same values previously set reassign 682628 pyqt4-dev-tools Bug #682628 [src:hachoir-metadata] hachoir-metadata: FTBFS: ERROR: Unable to compile dialog.ui to dialog_ui.py using pyuic4 Bug reassigned from package 'src:hachoir-metadata' to 'pyqt4-dev-tools'. No longer marked as found in versions hachoir-metadata/1.3.3-1. Ignoring request to alter fixed versions of bug #682628 to the same values previously set forcemerge 682642 682635 682632 682645 682630 682626 682638 682623 682646 682649 682628 682637 Bug #682642 [pyqt4-dev-tools] code-saturne: FTBFS: /bin/bash: /usr/bin/pyuic4: /usr/bin/python3: bad interpreter: No such file or directory Bug #682637 [pyqt4-dev-tools] qgis: FTBFS: /bin/sh: 1: /usr/bin/pyuic4: not found Marked as found in versions python-qt4/4.9.3-3. Bug #682635 [pyqt4-dev-tools] dff: FTBFS: /bin/sh: 1: /usr/bin/pyuic4: not found Marked as found in versions python-qt4/4.9.3-3. Bug #682628 [pyqt4-dev-tools] hachoir-metadata: FTBFS: ERROR: Unable to compile dialog.ui to dialog_ui.py using pyuic4 Marked as found in versions python-qt4/4.9.3-3. Bug #682645 [pyqt4-dev-tools] pymecavideo: FTBFS: /bin/sh: 1: pyuic4: not found Marked as found in versions python-qt4/4.9.3-3. Bug #682623 [pyqt4-dev-tools] uicilibris: FTBFS: /bin/sh: 1: pyuic4: not found Marked as found in versions python-qt4/4.9.3-3. Bug #682626 [pyqt4-dev-tools] qct: FTBFS: /bin/sh: 1: pyuic4: not found Marked as found in versions python-qt4/4.9.3-3. Bug #682632 [pyqt4-dev-tools] pyacidobasic: FTBFS: /bin/sh: 1: pyuic4: not found Marked as found in versions python-qt4/4.9.3-3. Bug #682646 [pyqt4-dev-tools] pyuic4 should use python, not python3 Marked as
Bug#682633: libemail-outlook-message-perl: FTBFS: test failed
tags 682633 + confirmed tags 682633 - wheezy thanks Hi On Tue, Jul 24, 2012 at 11:44:27AM +0200, Lucas Nussbaum wrote: Source: libemail-outlook-message-perl Version: 0.911-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: debian/rules build dh build dh_testdir dh_auto_configure Checking prerequisites... requires: ! IO::All is not installed ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions of the modules indicated above before proceeding with this installation Run 'Build installdeps' to install missing prerequisites. Created MYMETA.yml and MYMETA.json Creating new 'Build' script for 'Email-Outlook-Message' version '0.911' dh_auto_build Building Email-Outlook-Message dh_auto_test t/basics.t ... ok t/gpg_signed.t ... ok # Failed test at t/internals.t line 87. # got: 'plain # ' # expected: 'plain # ' # Failed test at t/internals.t line 88. # got: 'html # ' # expected: 'html # ' # Looks like you failed 2 tests of 17. t/internals.t Dubious, test returned 2 (wstat 512, 0x200) Failed 2/17 subtests # Failed test 'No body' # at t/plain_jpeg_attached.t line 17. # got: ' # ' # expected: ' # ' # Failed test 'Testing body' # at t/plain_jpeg_attached.t line 29. # got: 'test # # ' # expected: 'test # # ' # Looks like you failed 2 tests of 23. t/plain_jpeg_attached.t .. Dubious, test returned 2 (wstat 512, 0x200) Failed 2/23 subtests # Failed test 'Check body' # at t/plain_uc_unsent.t line 23. # got: 'This is a test # The body is in plain text # ' # expected: 'This is a test # The body is in plain text # ' # Looks like you failed 1 test of 15. t/plain_uc_unsent.t .. Dubious, test returned 1 (wstat 256, 0x100) Failed 1/15 subtests # Failed test 'Check body' # at t/plain_uc_wc_unsent.t line 28. Wide character in print at /usr/share/perl/5.14/Test/Builder.pm line 1759. # got: 'This is a test # The body is in p汬ain text # ' # expected: 'This is a test # The body is in p汬ain text # ' # Looks like you failed 1 test of 14. t/plain_uc_wc_unsent.t ... Dubious, test returned 1 (wstat 256, 0x100) Failed 1/14 subtests # Failed test 'Check body' # at t/plain_unsent.t line 25. # got: 'This is a test # The body is in plain text # ' # expected: 'This is a test # The body is in plain text # ' # Looks like you failed 1 test of 15. t/plain_unsent.t . Dubious, test returned 1 (wstat 256, 0x100) Failed 1/15 subtests t/pod_coverage.t . ok Test Summary Report --- t/internals.t (Wstat: 512 Tests: 17 Failed: 2) Failed tests: 16-17 Non-zero exit status: 2 t/plain_jpeg_attached.t (Wstat: 512 Tests: 23 Failed: 2) Failed tests: 9, 15 Non-zero exit status: 2 t/plain_uc_unsent.t(Wstat: 256 Tests: 15 Failed: 1) Failed test: 10 Non-zero exit status: 1 t/plain_uc_wc_unsent.t (Wstat: 256 Tests: 14 Failed: 1) Failed test: 10 Non-zero exit status: 1 t/plain_unsent.t (Wstat: 256 Tests: 15 Failed: 1) Failed test: 11 Non-zero exit status: 1 Files=8, Tests=91, 1 wallclock secs ( 0.23 usr 0.10 sys + 0.64 cusr 0.16 csys = 1.13 CPU) Result: FAIL Failed 5/8 test programs. 7/91 subtests failed. dh_auto_test: perl Build test returned exit code 255 make: *** [build] Error 255 Same as in #682629, this is caused by an update in libemail-simple-perl. I have verified that the package builds in wheezy and only FTBFS in unstable (due to the updated libemail-simple-perl). Regards, Salvatore signature.asc Description: Digital signature
Processed: Re: Bug#682633: libemail-outlook-message-perl: FTBFS: test failed
Processing commands for cont...@bugs.debian.org: tags 682633 + confirmed Bug #682633 [src:libemail-outlook-message-perl] libemail-outlook-message-perl: FTBFS: test failed Added tag(s) confirmed. tags 682633 - wheezy Bug #682633 [src:libemail-outlook-message-perl] libemail-outlook-message-perl: FTBFS: test failed Removed tag(s) wheezy. thanks Stopping processing here. Please contact me if you need assistance. -- 682633: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682633 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682629: marked as done (libemail-mime-perl: FTBFS: test failed)
Your message dated Tue, 24 Jul 2012 18:17:09 + with message-id e1stjfr-ym...@franck.debian.org and subject line Bug#682629: fixed in libemail-mime-perl 1.911-1 has caused the Debian Bug report #682629, regarding libemail-mime-perl: FTBFS: test failed to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 682629: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682629 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Source: libemail-mime-perl Version: 1.910-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[1]: Entering directory `/«PKGBUILDDIR»' PERL_DL_NONLAZY=1 /usr/bin/perl -MExtUtils::Command::MM -e test_harness(0, 'blib/lib', 'blib/arch') t/*.t t/auto_create.t ... ok t/basic.t . ok t/content_id.t ok t/ct_attrs.t .. ok t/dispo.t . ok t/disposition.t ... ok t/encoding.t .. ok t/multipart.t . ok t/nested-parts.t .. ok t/part-encs.t . ok t/parts.t . ok t/perl-minver.t ... ok t/pod-coverage.t .. ok t/pod.t ... ok t/read-nested.t ... ok # Failed test 'as_string matches' # at t/singlepart.t line 43. # got: 'From: me # To: you # Subject: test # MIME-Version: 1.0 # Content-Transfer-Encoding: base64 # # ClRoaXMgaXMgbXkgc2luZ2xlcGFydCBtZXNzYWdlLgpJdCdzIGJhc2U2NCBlbmNvZGVkLgo= # ' # expected: 'From: me # To: you # Subject: test # MIME-Version: 1.0 # Content-Transfer-Encoding: base64 # # ClRoaXMgaXMgbXkgc2luZ2xlcGFydCBtZXNzYWdlLgpJdCdzIGJhc2U2NCBlbmNvZGVkLgo= # ' # Looks like you failed 1 test of 4. t/singlepart.t Dubious, test returned 1 (wstat 256, 0x100) Failed 1/4 subtests t/unicode.t ... ok t/walk-parts.t ok Test Summary Report --- t/singlepart.t (Wstat: 256 Tests: 4 Failed: 1) Failed test: 3 Non-zero exit status: 1 Files=18, Tests=173, 4 wallclock secs ( 0.51 usr 0.33 sys + 3.48 cusr 0.29 csys = 4.61 CPU) Result: FAIL Failed 1/18 test programs. 1/173 subtests failed. make[1]: *** [test_dynamic] Error 255 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/libemail-mime-perl_1.910-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. ---End Message--- ---BeginMessage--- Source: libemail-mime-perl Source-Version: 1.911-1 We believe that the bug you reported is fixed in the latest version of libemail-mime-perl, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 682...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Salvatore Bonaccorso car...@debian.org (supplier of updated libemail-mime-perl package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA512 Format: 1.8 Date: Tue, 24 Jul 2012 20:00:11 +0200 Source: libemail-mime-perl Binary: libemail-mime-perl Architecture: source all Version: 1.911-1 Distribution: unstable Urgency: low Maintainer: Debian Perl Group pkg-perl-maintain...@lists.alioth.debian.org Changed-By: Salvatore Bonaccorso car...@debian.org Description: libemail-mime-perl - module for simple MIME message parsing Closes: 682629 Changes: libemail-mime-perl (1.911-1) unstable; urgency=low . * Team upload. . [ gregor herrmann ] * debian/control: update {versioned,alternative} (build) dependencies. . [ Salvatore Bonaccorso ] * Imported Upstream version 1.911 + require a newer Email::Simple and cope with its improved line ending tweaks (Closes: #682629). * Bump dependency for Email::Simple. Bump (Build-)Depends(-Indep) on libemail-simple-perl to (= 2.102). * Update format for debian/copyright file. Update format to copyright-format 1.0 as released together with Debian
Bug#682656: debian-installer-netboot-images: file conflicts between debian-installer-{6, 7}.0-netboot-arch
On Tue, Jul 24, 2012 at 13:38:00 +0200, Didier 'OdyX' Raboud wrote: That, or release-number-specify the paths; I'm not yet decided [0,1]. Opinions? Versioning the paths seems best, I think. Cheers, Julien signature.asc Description: Digital signature
Bug#682623: uicilibris: FTBFS: /bin/sh: 1: pyuic4: not found
Hello Lucas, I saw that this bug report, (and other bugreports too) have been reassigned to pyqt4-dev-tools. The key of the problem, as long as I could test it in a pbuilder login chroot with a fresh Sid environment, is that pyuic4 has been ported to python3 (and is meant to work only with python3). So there must be a new dependency for the package pyqt4-dev-tools (at least) : python3, python3-pyqt4 I append a patch to fix this bug. Best regards, Georges. Lucas Nussbaum a écrit : Source: uicilibris Version: 1.8-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: debian/rules build dh build dh_testdir dh_auto_configure dh_auto_build make[1]: Entering directory `/«PKGBUILDDIR»' make -C uicilibris all make[2]: Entering directory `/«PKGBUILDDIR»/uicilibris' pyuic4 export.ui Ui_export.py /bin/sh: 1: pyuic4: not found make[2]: *** [Ui_export.py] Error 127 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/uicilibris_1.8-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. -- Georges KHAZNADAR et Jocelyne FOURNIER 22 rue des mouettes, 59240 Dunkerque France. Téléphone +33 (0)3 28 29 17 70 --- control.orig 2012-07-24 20:22:31.35484 +0200 +++ control 2012-07-24 20:23:16.19084 +0200 @@ -353,8 +353,8 @@ the Qt example programs ported to Python. Package: pyqt4-dev-tools -Depends: python, - python-qt4 (= ${binary:Version}), +Depends: python3, + python3-pyqt4 (= ${binary:Version}), ${misc:Depends}, ${shlibs:Depends} Architecture: any signature.asc Description: Digital signature
Processed: severity of 682608 is normal
Processing commands for cont...@bugs.debian.org: severity 682608 normal Bug #682608 [installation-reports] installation-reports: wireless failure upon boot after install using new netinst via wifi -- wheezy 64-bit Severity set to 'normal' from 'critical' thanks Stopping processing here. Please contact me if you need assistance. -- 682608: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682608 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#616673: resolved
Hello, Upstream bug-report https://bugzilla.gnome.org/show_bug.cgi?id=678661 now says status resolved. What is status of this in Debian? - Henri Salo -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processed: bug 682633 is forwarded to http://rt.cpan.org/Public/Bug/Display.html?id=78556
Processing commands for cont...@bugs.debian.org: forwarded 682633 http://rt.cpan.org/Public/Bug/Display.html?id=78556 Bug #682633 [src:libemail-outlook-message-perl] libemail-outlook-message-perl: FTBFS: test failed Set Bug forwarded-to-address to 'http://rt.cpan.org/Public/Bug/Display.html?id=78556'. thanks Stopping processing here. Please contact me if you need assistance. -- 682633: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682633 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682426: cups: filter gs takes several minutes consuming 100 % of CPU
The real bug here is a Ghostscript bug. Ghostscript is not able to render a given input file in a reasonable time. This will be best fixed by the upstream developers of Ghostscript. They will need to reproduce the bug without CUPS, therefore we need the original input file and how CUPS has processed it. To obtain this information follow the instructions of the sections CUPS error_log and Capturing print job data on https://wiki.ubuntu.com/DebuggingPrintingProblems. These instructions are originally made for Ubuntu, but the CUPS package is identical in Debian and Ubuntu, so they should also work in Debian. Note that instead of running a command as root by preceding it with sudo, like sudo start cups, run the command (without preceded sudo) in a second terminal window where you have switched to root via su -. Till -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682623: [Python-modules-team] Bug#682623: uicilibris: FTBFS: /bin/sh: 1: pyuic4: not found
Looks like a dh_python3 bug that mistakenly rewrote that shebang. -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682708: psutils contains files with unknown/unclear copyright
Package: psutils Version: 1.17-32 Severity: serious User: gnewsense-...@nongnu.org Usertags: gnewsense libreplanet The license file in the psutils source code [1] contains the statement =Quote= The included files, md68_0.ps and md71_0.ps (and their uuencoded forms) are (to the best of my knowledge) copyright Apple Computer, Inc. =Quote= This is an issue for multiple reasons: 1) The copyright is unclear/unknown. Who holds the copyright to these files? 2) If it is in fact Apple Computer what license is it under? They do not appear to be under a free license. Potential fixes: gNewSense GNU/Linux removed both files along with fixmacps[2] I am using Trisquel GNU/Linux 5.5 kernel 3.0.0-23-generic however the issue is present in Debian as well by viewing the source code [1]. The associated Trisquel GNU/Linux bug can be found in the references [3]. References: [1] http://ftp.de.debian.org/debian/pool/main/p/psutils/psutils_1.17.orig.tar.gz [2]https://savannah.nongnu.org/bugs/?30782 [3]https://trisquel.info/en/issues/5981 -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682648: python-gnupg: FTBFS: test hangs for 60 mins
The package builds on my amd64, but running the tests takes a long time[1] because gnupg (called by python-gnupg) is waiting for random data. I suspect that the issue is that the typical lack of entropy of virtual machines is the cause of the 60 minutes wait. -- Elena ``of Valhalla'' -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682623: marked as done (uicilibris: FTBFS: /bin/sh: 1: pyuic4: not found)
Your message dated Tue, 24 Jul 2012 21:03:17 + with message-id e1stmgd-0002dc...@franck.debian.org and subject line Bug#682623: fixed in python-qt4 4.9.3-4 has caused the Debian Bug report #682623, regarding uicilibris: FTBFS: /bin/sh: 1: pyuic4: not found to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 682623: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682623 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Source: uicilibris Version: 1.8-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: debian/rules build dh build dh_testdir dh_auto_configure dh_auto_build make[1]: Entering directory `/«PKGBUILDDIR»' make -C uicilibris all make[2]: Entering directory `/«PKGBUILDDIR»/uicilibris' pyuic4 export.ui Ui_export.py /bin/sh: 1: pyuic4: not found make[2]: *** [Ui_export.py] Error 127 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/uicilibris_1.8-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. ---End Message--- ---BeginMessage--- Source: python-qt4 Source-Version: 4.9.3-4 We believe that the bug you reported is fixed in the latest version of python-qt4, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 682...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Scott Kitterman sc...@kitterman.com (supplier of updated python-qt4 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Tue, 24 Jul 2012 16:12:15 -0400 Source: python-qt4 Binary: python-qt4 python3-pyqt4 python-qt4-dbg python3-pyqt4-dbg python-qt4-phonon python3-pyqt4.phonon python-qt4-phonon-dbg python3-pyqt4.phonon-dbg python-qt4-dbus python-qt4-dbus-dbg python3-dbus.mainloop.qt python3-dbus.mainloop.qt-dbg python-qt4-gl python-qt4-gl-dbg python3-pyqt4.qtopengl python3-pyqt4.qtopengl-dbg python-qt4-sql python3-pyqt4.qtsql python-qt4-sql-dbg python3-pyqt4.qtsql-dbg python-qt4-dev python-qt4-doc pyqt4-dev-tools Architecture: source i386 all Version: 4.9.3-4 Distribution: unstable Urgency: low Maintainer: Debian Python Modules Team python-modules-t...@lists.alioth.debian.org Changed-By: Scott Kitterman sc...@kitterman.com Description: pyqt4-dev-tools - Development tools for PyQt4 python-qt4 - Python bindings for Qt4 python-qt4-dbg - Python bindings for Qt4 (debug extensions) python-qt4-dbus - D-Bus Support for PyQt4 python-qt4-dbus-dbg - D-Bus Support for PyQt4 (debug extensions) python-qt4-dev - Development files for PyQt4 python-qt4-doc - Documentation and examples for PyQt4 python-qt4-gl - Python bindings for Qt4's OpenGL module python-qt4-gl-dbg - Python bindings for Qt4's OpenGL module (debug extension) python-qt4-phonon - Python bindings for Phonon python-qt4-phonon-dbg - Python bindings for Phonon (debug extensions) python-qt4-sql - Python bindings for PyQt4's SQL module python-qt4-sql-dbg - Python bindings for PyQt4's SQL module (debug extension) python3-dbus.mainloop.qt - D-Bus Support for PyQt4 with Python 3 python3-dbus.mainloop.qt-dbg - D-Bus Support for PyQt4 (debug extensions for Python 3) python3-pyqt4 - Python3 bindings for Qt4 python3-pyqt4-dbg - Python3 bindings for Qt4 (debug extensions) python3-pyqt4.phonon - Python3 bindings for Phonon python3-pyqt4.phonon-dbg - Python3 bindings for Phonon (debug extensions) python3-pyqt4.qtopengl - Python 3 bindings for Qt4's OpenGL module python3-pyqt4.qtopengl-dbg - Python 3 bindings for Qt4's OpenGL module (debug extension) python3-pyqt4.qtsql - Python3 bindings for PyQt4's SQL module python3-pyqt4.qtsql-dbg - Python3 bindings for PyQt4's SQL module (debug extension) Closes: 682623 Changes: python-qt4
Bug#682626: marked as done (qct: FTBFS: /bin/sh: 1: pyuic4: not found)
Your message dated Tue, 24 Jul 2012 21:03:17 + with message-id e1stmgd-0002dc...@franck.debian.org and subject line Bug#682623: fixed in python-qt4 4.9.3-4 has caused the Debian Bug report #682623, regarding qct: FTBFS: /bin/sh: 1: pyuic4: not found to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 682623: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682623 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Source: qct Version: 1.7-3 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[1]: Entering directory `/«PKGBUILDDIR»' make[1]: Nothing to be done for `update-config'. make[1]: Leaving directory `/«PKGBUILDDIR»' cd . \ python setup.py build \ --build-base=/«PKGBUILDDIR»/./build running build running build_py creating /«PKGBUILDDIR»/build creating /«PKGBUILDDIR»/build/lib.linux-x86_64-2.7 creating /«PKGBUILDDIR»/build/lib.linux-x86_64-2.7/qctlib copying qctlib/ui_select.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib copying qctlib/ui_preferences.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib copying qctlib/ui_dialog.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib copying qctlib/changeselect.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib copying qctlib/version.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib copying qctlib/utils.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib copying qctlib/patches.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib copying qctlib/gui_logic.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib copying qctlib/__init__.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib creating /«PKGBUILDDIR»/build/lib.linux-x86_64-2.7/qctlib/vcs copying qctlib/vcs/cg.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib/vcs copying qctlib/vcs/svn.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib/vcs copying qctlib/vcs/p4.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib/vcs copying qctlib/vcs/mtn.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib/vcs copying qctlib/vcs/hg.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib/vcs copying qctlib/vcs/git.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib/vcs copying qctlib/vcs/cvs.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib/vcs copying qctlib/vcs/bzr.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib/vcs copying qctlib/vcs/__init__.py - /«PKGBUILDDIR»/./build/lib.linux-x86_64-2.7/qctlib/vcs running build_scripts creating /«PKGBUILDDIR»/build/scripts-2.7 copying and adjusting qct - /«PKGBUILDDIR»/./build/scripts-2.7 changing mode of /«PKGBUILDDIR»/./build/scripts-2.7/qct from 664 to 775 touch debian/python-module-stampdir/qct rm -f qctlib/ui_dialog.py qctlib/ui_preferences.py /usr/bin/make qctlib/ui_dialog.py qctlib/ui_preferences.py make[1]: Entering directory `/«PKGBUILDDIR»' pyuic4 qctlib/dialog.ui qctlib/ui_dialog.py /bin/sh: 1: pyuic4: not found make[1]: *** [qctlib/ui_dialog.py] Error 127 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/qct_1.7-3_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. ---End Message--- ---BeginMessage--- Source: python-qt4 Source-Version: 4.9.3-4 We believe that the bug you reported is fixed in the latest version of python-qt4, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 682...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Scott Kitterman sc...@kitterman.com (supplier of updated python-qt4 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Tue, 24 Jul 2012 16
Bug#682630: marked as done (pysatellites: FTBFS: make[1]: pyuic4: Command not found)
Your message dated Tue, 24 Jul 2012 21:03:17 + with message-id e1stmgd-0002dc...@franck.debian.org and subject line Bug#682623: fixed in python-qt4 4.9.3-4 has caused the Debian Bug report #682623, regarding pysatellites: FTBFS: make[1]: pyuic4: Command not found to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 682623: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682623 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Source: pysatellites Version: 1.0-6 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: debian/rules build dh build --with python2 dh_testdir dh_auto_configure dh_auto_build make[1]: Entering directory `/«PKGBUILDDIR»' pyuic4 pysat.ui -o UI_pysat.py make[1]: pyuic4: Command not found make[1]: *** [UI_pysat.py] Error 127 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/pysatellites_1.0-6_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. ---End Message--- ---BeginMessage--- Source: python-qt4 Source-Version: 4.9.3-4 We believe that the bug you reported is fixed in the latest version of python-qt4, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 682...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Scott Kitterman sc...@kitterman.com (supplier of updated python-qt4 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Tue, 24 Jul 2012 16:12:15 -0400 Source: python-qt4 Binary: python-qt4 python3-pyqt4 python-qt4-dbg python3-pyqt4-dbg python-qt4-phonon python3-pyqt4.phonon python-qt4-phonon-dbg python3-pyqt4.phonon-dbg python-qt4-dbus python-qt4-dbus-dbg python3-dbus.mainloop.qt python3-dbus.mainloop.qt-dbg python-qt4-gl python-qt4-gl-dbg python3-pyqt4.qtopengl python3-pyqt4.qtopengl-dbg python-qt4-sql python3-pyqt4.qtsql python-qt4-sql-dbg python3-pyqt4.qtsql-dbg python-qt4-dev python-qt4-doc pyqt4-dev-tools Architecture: source i386 all Version: 4.9.3-4 Distribution: unstable Urgency: low Maintainer: Debian Python Modules Team python-modules-t...@lists.alioth.debian.org Changed-By: Scott Kitterman sc...@kitterman.com Description: pyqt4-dev-tools - Development tools for PyQt4 python-qt4 - Python bindings for Qt4 python-qt4-dbg - Python bindings for Qt4 (debug extensions) python-qt4-dbus - D-Bus Support for PyQt4 python-qt4-dbus-dbg - D-Bus Support for PyQt4 (debug extensions) python-qt4-dev - Development files for PyQt4 python-qt4-doc - Documentation and examples for PyQt4 python-qt4-gl - Python bindings for Qt4's OpenGL module python-qt4-gl-dbg - Python bindings for Qt4's OpenGL module (debug extension) python-qt4-phonon - Python bindings for Phonon python-qt4-phonon-dbg - Python bindings for Phonon (debug extensions) python-qt4-sql - Python bindings for PyQt4's SQL module python-qt4-sql-dbg - Python bindings for PyQt4's SQL module (debug extension) python3-dbus.mainloop.qt - D-Bus Support for PyQt4 with Python 3 python3-dbus.mainloop.qt-dbg - D-Bus Support for PyQt4 (debug extensions for Python 3) python3-pyqt4 - Python3 bindings for Qt4 python3-pyqt4-dbg - Python3 bindings for Qt4 (debug extensions) python3-pyqt4.phonon - Python3 bindings for Phonon python3-pyqt4.phonon-dbg - Python3 bindings for Phonon (debug extensions) python3-pyqt4.qtopengl - Python 3 bindings for Qt4's OpenGL module python3-pyqt4.qtopengl-dbg - Python 3 bindings for Qt4's OpenGL module (debug extension) python3-pyqt4.qtsql - Python3 bindings for PyQt4's SQL module python3-pyqt4.qtsql-dbg - Python3 bindings for PyQt4's SQL module (debug extension) Closes: 682623 Changes: python-qt4 (4.9.3-4) unstable; urgency=low . * Add -N
Bug#682628: marked as done (hachoir-metadata: FTBFS: ERROR: Unable to compile dialog.ui to dialog_ui.py using pyuic4)
Your message dated Tue, 24 Jul 2012 21:03:17 + with message-id e1stmgd-0002dc...@franck.debian.org and subject line Bug#682623: fixed in python-qt4 4.9.3-4 has caused the Debian Bug report #682623, regarding hachoir-metadata: FTBFS: ERROR: Unable to compile dialog.ui to dialog_ui.py using pyuic4 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 682623: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682623 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Source: hachoir-metadata Version: 1.3.3-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: debian/rules build pyversions: missing X(S)-Python-Version in control file, fall back to debian/pyversions test -x debian/rules mkdir -p . mkdir -p debian/python-module-stampdir cd . \ python setup.py build \ --build-base=/«PKGBUILDDIR»/./build ERROR: Unable to compile dialog.ui to dialog_ui.py using pyuic4 Use command setup.py build --build-base=/«PKGBUILDDIR»/./build --disable-qt to skip hachoir-metadata-qt pyuic4 is included in the PyQt4 development package make: *** [debian/python-module-stampdir/python-hachoir-metadata] Error 1 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/hachoir-metadata_1.3.3-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. ---End Message--- ---BeginMessage--- Source: python-qt4 Source-Version: 4.9.3-4 We believe that the bug you reported is fixed in the latest version of python-qt4, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 682...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Scott Kitterman sc...@kitterman.com (supplier of updated python-qt4 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Tue, 24 Jul 2012 16:12:15 -0400 Source: python-qt4 Binary: python-qt4 python3-pyqt4 python-qt4-dbg python3-pyqt4-dbg python-qt4-phonon python3-pyqt4.phonon python-qt4-phonon-dbg python3-pyqt4.phonon-dbg python-qt4-dbus python-qt4-dbus-dbg python3-dbus.mainloop.qt python3-dbus.mainloop.qt-dbg python-qt4-gl python-qt4-gl-dbg python3-pyqt4.qtopengl python3-pyqt4.qtopengl-dbg python-qt4-sql python3-pyqt4.qtsql python-qt4-sql-dbg python3-pyqt4.qtsql-dbg python-qt4-dev python-qt4-doc pyqt4-dev-tools Architecture: source i386 all Version: 4.9.3-4 Distribution: unstable Urgency: low Maintainer: Debian Python Modules Team python-modules-t...@lists.alioth.debian.org Changed-By: Scott Kitterman sc...@kitterman.com Description: pyqt4-dev-tools - Development tools for PyQt4 python-qt4 - Python bindings for Qt4 python-qt4-dbg - Python bindings for Qt4 (debug extensions) python-qt4-dbus - D-Bus Support for PyQt4 python-qt4-dbus-dbg - D-Bus Support for PyQt4 (debug extensions) python-qt4-dev - Development files for PyQt4 python-qt4-doc - Documentation and examples for PyQt4 python-qt4-gl - Python bindings for Qt4's OpenGL module python-qt4-gl-dbg - Python bindings for Qt4's OpenGL module (debug extension) python-qt4-phonon - Python bindings for Phonon python-qt4-phonon-dbg - Python bindings for Phonon (debug extensions) python-qt4-sql - Python bindings for PyQt4's SQL module python-qt4-sql-dbg - Python bindings for PyQt4's SQL module (debug extension) python3-dbus.mainloop.qt - D-Bus Support for PyQt4 with Python 3 python3-dbus.mainloop.qt-dbg - D-Bus Support for PyQt4 (debug extensions for Python 3) python3-pyqt4 - Python3 bindings for Qt4 python3-pyqt4-dbg - Python3 bindings for Qt4 (debug extensions) python3-pyqt4.phonon - Python3 bindings for Phonon python3-pyqt4.phonon-dbg - Python3 bindings for Phonon (debug extensions) python3-pyqt4
Bug#682632: marked as done (pyacidobasic: FTBFS: /bin/sh: 1: pyuic4: not found)
Your message dated Tue, 24 Jul 2012 21:03:17 + with message-id e1stmgd-0002dc...@franck.debian.org and subject line Bug#682623: fixed in python-qt4 4.9.3-4 has caused the Debian Bug report #682623, regarding pyacidobasic: FTBFS: /bin/sh: 1: pyuic4: not found to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 682623: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682623 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Source: pyacidobasic Version: 2.2-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: debian/rules build dh build --with python2 dh_testdir dh_auto_configure dh_auto_build make[1]: Entering directory `/«PKGBUILDDIR»' pyuic4 main.ui | sed -e 's/^from qwt_plot/from PyQt4.Qwt5/' -e 's%\(icons/[-:a-zA-Z_0-9]*\.svg\)%/usr/share/pyacidobasic/\1%g' -e 's%../../../../../usr/share/icons%/usr/share/icons%' Ui_main.py /bin/sh: 1: pyuic4: not found pyuic4 prelevement.ui Ui_prelevement.py /bin/sh: 1: pyuic4: not found make[1]: *** [Ui_prelevement.py] Error 127 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/pyacidobasic_2.2-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. ---End Message--- ---BeginMessage--- Source: python-qt4 Source-Version: 4.9.3-4 We believe that the bug you reported is fixed in the latest version of python-qt4, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 682...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Scott Kitterman sc...@kitterman.com (supplier of updated python-qt4 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Tue, 24 Jul 2012 16:12:15 -0400 Source: python-qt4 Binary: python-qt4 python3-pyqt4 python-qt4-dbg python3-pyqt4-dbg python-qt4-phonon python3-pyqt4.phonon python-qt4-phonon-dbg python3-pyqt4.phonon-dbg python-qt4-dbus python-qt4-dbus-dbg python3-dbus.mainloop.qt python3-dbus.mainloop.qt-dbg python-qt4-gl python-qt4-gl-dbg python3-pyqt4.qtopengl python3-pyqt4.qtopengl-dbg python-qt4-sql python3-pyqt4.qtsql python-qt4-sql-dbg python3-pyqt4.qtsql-dbg python-qt4-dev python-qt4-doc pyqt4-dev-tools Architecture: source i386 all Version: 4.9.3-4 Distribution: unstable Urgency: low Maintainer: Debian Python Modules Team python-modules-t...@lists.alioth.debian.org Changed-By: Scott Kitterman sc...@kitterman.com Description: pyqt4-dev-tools - Development tools for PyQt4 python-qt4 - Python bindings for Qt4 python-qt4-dbg - Python bindings for Qt4 (debug extensions) python-qt4-dbus - D-Bus Support for PyQt4 python-qt4-dbus-dbg - D-Bus Support for PyQt4 (debug extensions) python-qt4-dev - Development files for PyQt4 python-qt4-doc - Documentation and examples for PyQt4 python-qt4-gl - Python bindings for Qt4's OpenGL module python-qt4-gl-dbg - Python bindings for Qt4's OpenGL module (debug extension) python-qt4-phonon - Python bindings for Phonon python-qt4-phonon-dbg - Python bindings for Phonon (debug extensions) python-qt4-sql - Python bindings for PyQt4's SQL module python-qt4-sql-dbg - Python bindings for PyQt4's SQL module (debug extension) python3-dbus.mainloop.qt - D-Bus Support for PyQt4 with Python 3 python3-dbus.mainloop.qt-dbg - D-Bus Support for PyQt4 (debug extensions for Python 3) python3-pyqt4 - Python3 bindings for Qt4 python3-pyqt4-dbg - Python3 bindings for Qt4 (debug extensions) python3-pyqt4.phonon - Python3 bindings for Phonon python3-pyqt4.phonon-dbg - Python3 bindings for Phonon (debug extensions) python3-pyqt4.qtopengl - Python 3 bindings for Qt4's OpenGL module python3-pyqt4.qtopengl-dbg - Python 3 bindings for Qt4's OpenGL module (debug extension
Bug#682637: marked as done (qgis: FTBFS: /bin/sh: 1: /usr/bin/pyuic4: not found)
Your message dated Tue, 24 Jul 2012 21:03:17 + with message-id e1stmgd-0002dc...@franck.debian.org and subject line Bug#682623: fixed in python-qt4 4.9.3-4 has caused the Debian Bug report #682623, regarding qgis: FTBFS: /bin/sh: 1: /usr/bin/pyuic4: not found to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 682623: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682623 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Source: qgis Version: 1.7.4+1.7.5~20120320-1.1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[3]: Entering directory `/«BUILDDIR»/qgis-1.7.4+1.7.5~20120320/debian/build' Scanning dependencies of target pluginstaller make[3]: Leaving directory `/«BUILDDIR»/qgis-1.7.4+1.7.5~20120320/debian/build' make[3]: Entering directory `/«BUILDDIR»/qgis-1.7.4+1.7.5~20120320/debian/build' [ 95%] Generating ui_qgsplugininstallerbase.py /bin/sh: 1: /usr/bin/pyuic4: not found make[3]: *** [python/plugins/plugin_installer/ui_qgsplugininstallerbase.py] Error 127 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/qgis_1.7.4+1.7.5~20120320-1.1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. ---End Message--- ---BeginMessage--- Source: python-qt4 Source-Version: 4.9.3-4 We believe that the bug you reported is fixed in the latest version of python-qt4, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 682...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Scott Kitterman sc...@kitterman.com (supplier of updated python-qt4 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Tue, 24 Jul 2012 16:12:15 -0400 Source: python-qt4 Binary: python-qt4 python3-pyqt4 python-qt4-dbg python3-pyqt4-dbg python-qt4-phonon python3-pyqt4.phonon python-qt4-phonon-dbg python3-pyqt4.phonon-dbg python-qt4-dbus python-qt4-dbus-dbg python3-dbus.mainloop.qt python3-dbus.mainloop.qt-dbg python-qt4-gl python-qt4-gl-dbg python3-pyqt4.qtopengl python3-pyqt4.qtopengl-dbg python-qt4-sql python3-pyqt4.qtsql python-qt4-sql-dbg python3-pyqt4.qtsql-dbg python-qt4-dev python-qt4-doc pyqt4-dev-tools Architecture: source i386 all Version: 4.9.3-4 Distribution: unstable Urgency: low Maintainer: Debian Python Modules Team python-modules-t...@lists.alioth.debian.org Changed-By: Scott Kitterman sc...@kitterman.com Description: pyqt4-dev-tools - Development tools for PyQt4 python-qt4 - Python bindings for Qt4 python-qt4-dbg - Python bindings for Qt4 (debug extensions) python-qt4-dbus - D-Bus Support for PyQt4 python-qt4-dbus-dbg - D-Bus Support for PyQt4 (debug extensions) python-qt4-dev - Development files for PyQt4 python-qt4-doc - Documentation and examples for PyQt4 python-qt4-gl - Python bindings for Qt4's OpenGL module python-qt4-gl-dbg - Python bindings for Qt4's OpenGL module (debug extension) python-qt4-phonon - Python bindings for Phonon python-qt4-phonon-dbg - Python bindings for Phonon (debug extensions) python-qt4-sql - Python bindings for PyQt4's SQL module python-qt4-sql-dbg - Python bindings for PyQt4's SQL module (debug extension) python3-dbus.mainloop.qt - D-Bus Support for PyQt4 with Python 3 python3-dbus.mainloop.qt-dbg - D-Bus Support for PyQt4 (debug extensions for Python 3) python3-pyqt4 - Python3 bindings for Qt4 python3-pyqt4-dbg - Python3 bindings for Qt4 (debug extensions) python3-pyqt4.phonon - Python3 bindings for Phonon python3-pyqt4.phonon-dbg - Python3 bindings for Phonon (debug extensions) python3-pyqt4.qtopengl - Python 3 bindings for Qt4's OpenGL module python3-pyqt4.qtopengl-dbg - Python 3 bindings for Qt4's OpenGL module (debug
Bug#682642: marked as done (code-saturne: FTBFS: /bin/bash: /usr/bin/pyuic4: /usr/bin/python3: bad interpreter: No such file or directory)
Your message dated Tue, 24 Jul 2012 21:03:17 + with message-id e1stmgd-0002dc...@franck.debian.org and subject line Bug#682623: fixed in python-qt4 4.9.3-4 has caused the Debian Bug report #682623, regarding code-saturne: FTBFS: /bin/bash: /usr/bin/pyuic4: /usr/bin/python3: bad interpreter: No such file or directory to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 682623: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682623 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Source: code-saturne Version: 2.1.7-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[3]: Entering directory `/«PKGBUILDDIR»/gui' Making all in Base make[4]: Entering directory `/«PKGBUILDDIR»/gui/Base' /usr/bin/pyuic4 -o BrowserForm.py BrowserForm.ui /bin/bash: /usr/bin/pyuic4: /usr/bin/python3: bad interpreter: No such file or directory make[4]: *** [BrowserForm.py] Error 126 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/code-saturne_2.1.7-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. ---End Message--- ---BeginMessage--- Source: python-qt4 Source-Version: 4.9.3-4 We believe that the bug you reported is fixed in the latest version of python-qt4, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 682...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Scott Kitterman sc...@kitterman.com (supplier of updated python-qt4 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Tue, 24 Jul 2012 16:12:15 -0400 Source: python-qt4 Binary: python-qt4 python3-pyqt4 python-qt4-dbg python3-pyqt4-dbg python-qt4-phonon python3-pyqt4.phonon python-qt4-phonon-dbg python3-pyqt4.phonon-dbg python-qt4-dbus python-qt4-dbus-dbg python3-dbus.mainloop.qt python3-dbus.mainloop.qt-dbg python-qt4-gl python-qt4-gl-dbg python3-pyqt4.qtopengl python3-pyqt4.qtopengl-dbg python-qt4-sql python3-pyqt4.qtsql python-qt4-sql-dbg python3-pyqt4.qtsql-dbg python-qt4-dev python-qt4-doc pyqt4-dev-tools Architecture: source i386 all Version: 4.9.3-4 Distribution: unstable Urgency: low Maintainer: Debian Python Modules Team python-modules-t...@lists.alioth.debian.org Changed-By: Scott Kitterman sc...@kitterman.com Description: pyqt4-dev-tools - Development tools for PyQt4 python-qt4 - Python bindings for Qt4 python-qt4-dbg - Python bindings for Qt4 (debug extensions) python-qt4-dbus - D-Bus Support for PyQt4 python-qt4-dbus-dbg - D-Bus Support for PyQt4 (debug extensions) python-qt4-dev - Development files for PyQt4 python-qt4-doc - Documentation and examples for PyQt4 python-qt4-gl - Python bindings for Qt4's OpenGL module python-qt4-gl-dbg - Python bindings for Qt4's OpenGL module (debug extension) python-qt4-phonon - Python bindings for Phonon python-qt4-phonon-dbg - Python bindings for Phonon (debug extensions) python-qt4-sql - Python bindings for PyQt4's SQL module python-qt4-sql-dbg - Python bindings for PyQt4's SQL module (debug extension) python3-dbus.mainloop.qt - D-Bus Support for PyQt4 with Python 3 python3-dbus.mainloop.qt-dbg - D-Bus Support for PyQt4 (debug extensions for Python 3) python3-pyqt4 - Python3 bindings for Qt4 python3-pyqt4-dbg - Python3 bindings for Qt4 (debug extensions) python3-pyqt4.phonon - Python3 bindings for Phonon python3-pyqt4.phonon-dbg - Python3 bindings for Phonon (debug extensions) python3-pyqt4.qtopengl - Python 3 bindings for Qt4's OpenGL module python3-pyqt4.qtopengl-dbg - Python 3 bindings for Qt4's OpenGL module (debug extension) python3-pyqt4.qtsql - Python3 bindings for PyQt4's SQL module python3-pyqt4.qtsql-dbg - Python3 bindings for PyQt4's SQL
Bug#682635: marked as done (dff: FTBFS: /bin/sh: 1: /usr/bin/pyuic4: not found)
Your message dated Tue, 24 Jul 2012 21:03:17 + with message-id e1stmgd-0002dc...@franck.debian.org and subject line Bug#682623: fixed in python-qt4 4.9.3-4 has caused the Debian Bug report #682623, regarding dff: FTBFS: /bin/sh: 1: /usr/bin/pyuic4: not found to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 682623: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682623 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Source: dff Version: 1.2.0+dfsg.1-1 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[4]: Entering directory `/«BUILDDIR»/dff-1.2.0+dfsg.1/build-2.7' cd /«BUILDDIR»/dff-1.2.0+dfsg.1/build-2.7 /usr/bin/cmake -E cmake_depends Unix Makefiles /«BUILDDIR»/dff-1.2.0+dfsg.1 /«BUILDDIR»/dff-1.2.0+dfsg.1/ui/gui/resources /«BUILDDIR»/dff-1.2.0+dfsg.1/build-2.7 /«BUILDDIR»/dff-1.2.0+dfsg.1/build-2.7/ui/gui/resources /«BUILDDIR»/dff-1.2.0+dfsg.1/build-2.7/ui/gui/resources/CMakeFiles/ui_resources.about.ui.dir/DependInfo.cmake --color= Scanning dependencies of target ui_resources.about.ui make[4]: Leaving directory `/«BUILDDIR»/dff-1.2.0+dfsg.1/build-2.7' make -f ui/gui/resources/CMakeFiles/ui_resources.about.ui.dir/build.make ui/gui/resources/CMakeFiles/ui_resources.about.ui.dir/build make[4]: Entering directory `/«BUILDDIR»/dff-1.2.0+dfsg.1/build-2.7' cd /«BUILDDIR»/dff-1.2.0+dfsg.1/build-2.7/ui/gui/resources /usr/bin/pyuic4 -o /«BUILDDIR»/dff-1.2.0+dfsg.1/build-2.7/ui/gui/resources/ui_about.py /«BUILDDIR»/dff-1.2.0+dfsg.1/ui/gui/resources/about.ui /bin/sh: 1: /usr/bin/pyuic4: not found make[4]: *** [ui/gui/resources/CMakeFiles/ui_resources.about.ui] Error 127 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/dff_1.2.0+dfsg.1-1_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. ---End Message--- ---BeginMessage--- Source: python-qt4 Source-Version: 4.9.3-4 We believe that the bug you reported is fixed in the latest version of python-qt4, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 682...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Scott Kitterman sc...@kitterman.com (supplier of updated python-qt4 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Tue, 24 Jul 2012 16:12:15 -0400 Source: python-qt4 Binary: python-qt4 python3-pyqt4 python-qt4-dbg python3-pyqt4-dbg python-qt4-phonon python3-pyqt4.phonon python-qt4-phonon-dbg python3-pyqt4.phonon-dbg python-qt4-dbus python-qt4-dbus-dbg python3-dbus.mainloop.qt python3-dbus.mainloop.qt-dbg python-qt4-gl python-qt4-gl-dbg python3-pyqt4.qtopengl python3-pyqt4.qtopengl-dbg python-qt4-sql python3-pyqt4.qtsql python-qt4-sql-dbg python3-pyqt4.qtsql-dbg python-qt4-dev python-qt4-doc pyqt4-dev-tools Architecture: source i386 all Version: 4.9.3-4 Distribution: unstable Urgency: low Maintainer: Debian Python Modules Team python-modules-t...@lists.alioth.debian.org Changed-By: Scott Kitterman sc...@kitterman.com Description: pyqt4-dev-tools - Development tools for PyQt4 python-qt4 - Python bindings for Qt4 python-qt4-dbg - Python bindings for Qt4 (debug extensions) python-qt4-dbus - D-Bus Support for PyQt4 python-qt4-dbus-dbg - D-Bus Support for PyQt4 (debug extensions) python-qt4-dev - Development files for PyQt4 python-qt4-doc - Documentation and examples for PyQt4 python-qt4-gl - Python bindings for Qt4's OpenGL module python-qt4-gl-dbg - Python bindings for Qt4's OpenGL module (debug extension) python-qt4-phonon - Python bindings for Phonon python-qt4-phonon-dbg - Python bindings for Phonon (debug extensions) python-qt4-sql - Python bindings for PyQt4's SQL module
Bug#682645: marked as done (pymecavideo: FTBFS: /bin/sh: 1: pyuic4: not found)
Your message dated Tue, 24 Jul 2012 21:03:17 + with message-id e1stmgd-0002dc...@franck.debian.org and subject line Bug#682623: fixed in python-qt4 4.9.3-4 has caused the Debian Bug report #682623, regarding pymecavideo: FTBFS: /bin/sh: 1: pyuic4: not found to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 682623: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682623 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Source: pymecavideo Version: 6.0-5 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: make[3]: Entering directory `/«PKGBUILDDIR»/lang' make[3]: *** No rule to make target `all'. Stop. make[3]: Leaving directory `/«PKGBUILDDIR»/lang' make[3]: Entering directory `/«PKGBUILDDIR»/src' pyuic4 pymecavideo.ui Ui_pymecavideo.py /bin/sh: 1: pyuic4: not found make[3]: *** [Ui_pymecavideo.py] Error 127 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/pymecavideo_6.0-5_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. ---End Message--- ---BeginMessage--- Source: python-qt4 Source-Version: 4.9.3-4 We believe that the bug you reported is fixed in the latest version of python-qt4, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 682...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Scott Kitterman sc...@kitterman.com (supplier of updated python-qt4 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Tue, 24 Jul 2012 16:12:15 -0400 Source: python-qt4 Binary: python-qt4 python3-pyqt4 python-qt4-dbg python3-pyqt4-dbg python-qt4-phonon python3-pyqt4.phonon python-qt4-phonon-dbg python3-pyqt4.phonon-dbg python-qt4-dbus python-qt4-dbus-dbg python3-dbus.mainloop.qt python3-dbus.mainloop.qt-dbg python-qt4-gl python-qt4-gl-dbg python3-pyqt4.qtopengl python3-pyqt4.qtopengl-dbg python-qt4-sql python3-pyqt4.qtsql python-qt4-sql-dbg python3-pyqt4.qtsql-dbg python-qt4-dev python-qt4-doc pyqt4-dev-tools Architecture: source i386 all Version: 4.9.3-4 Distribution: unstable Urgency: low Maintainer: Debian Python Modules Team python-modules-t...@lists.alioth.debian.org Changed-By: Scott Kitterman sc...@kitterman.com Description: pyqt4-dev-tools - Development tools for PyQt4 python-qt4 - Python bindings for Qt4 python-qt4-dbg - Python bindings for Qt4 (debug extensions) python-qt4-dbus - D-Bus Support for PyQt4 python-qt4-dbus-dbg - D-Bus Support for PyQt4 (debug extensions) python-qt4-dev - Development files for PyQt4 python-qt4-doc - Documentation and examples for PyQt4 python-qt4-gl - Python bindings for Qt4's OpenGL module python-qt4-gl-dbg - Python bindings for Qt4's OpenGL module (debug extension) python-qt4-phonon - Python bindings for Phonon python-qt4-phonon-dbg - Python bindings for Phonon (debug extensions) python-qt4-sql - Python bindings for PyQt4's SQL module python-qt4-sql-dbg - Python bindings for PyQt4's SQL module (debug extension) python3-dbus.mainloop.qt - D-Bus Support for PyQt4 with Python 3 python3-dbus.mainloop.qt-dbg - D-Bus Support for PyQt4 (debug extensions for Python 3) python3-pyqt4 - Python3 bindings for Qt4 python3-pyqt4-dbg - Python3 bindings for Qt4 (debug extensions) python3-pyqt4.phonon - Python3 bindings for Phonon python3-pyqt4.phonon-dbg - Python3 bindings for Phonon (debug extensions) python3-pyqt4.qtopengl - Python 3 bindings for Qt4's OpenGL module python3-pyqt4.qtopengl-dbg - Python 3 bindings for Qt4's OpenGL module (debug extension) python3-pyqt4.qtsql - Python3 bindings for PyQt4's SQL module python3-pyqt4.qtsql-dbg - Python3 bindings for PyQt4's SQL module (debug extension) Closes: 682623 Changes
Bug#682646: marked as done (pyuic4 should use python, not python3)
Your message dated Tue, 24 Jul 2012 21:03:17 + with message-id e1stmgd-0002dc...@franck.debian.org and subject line Bug#682623: fixed in python-qt4 4.9.3-4 has caused the Debian Bug report #682623, regarding pyuic4 should use python, not python3 to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 682623: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682623 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Source: weborf Version: 0.13-3 Severity: serious Tags: wheezy sid User: debian...@lists.debian.org Usertags: qa-ftbfs-20120724 qa-ftbfs Justification: FTBFS on amd64 Hi, During a rebuild of all packages in sid, your package failed to build on amd64. Relevant part: fakeroot debian/rules binary dh binary dh_testroot dh_prep dh_installdirs debian/rules override_dh_auto_install make[1]: Entering directory `/«PKGBUILDDIR»' pyuic4 qweborf/main.ui qweborf/main.py sh: 1: pyuic4: not found make[1]: *** [override_dh_auto_install] Error 127 The full build log is available from: http://people.debian.org/~lucas/logs/2012/07/24/weborf_0.13-3_unstable.log A list of current common problems and possible solutions is available at http://wiki.debian.org/qa.debian.org/FTBFS . You're welcome to contribute! About the archive rebuild: The rebuild was done on EC2 VM instances from Amazon Web Services, using a clean, minimal and up-to-date chroot. Every failed build was retried once to eliminate random failures. ---End Message--- ---BeginMessage--- Source: python-qt4 Source-Version: 4.9.3-4 We believe that the bug you reported is fixed in the latest version of python-qt4, which is due to be installed in the Debian FTP archive. A summary of the changes between this version and the previous one is attached. Thank you for reporting the bug, which will now be closed. If you have further comments please address them to 682...@bugs.debian.org, and the maintainer will reopen the bug report if appropriate. Debian distribution maintenance software pp. Scott Kitterman sc...@kitterman.com (supplier of updated python-qt4 package) (This message was generated automatically at their request; if you believe that there is a problem with it please contact the archive administrators by mailing ftpmas...@debian.org) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Format: 1.8 Date: Tue, 24 Jul 2012 16:12:15 -0400 Source: python-qt4 Binary: python-qt4 python3-pyqt4 python-qt4-dbg python3-pyqt4-dbg python-qt4-phonon python3-pyqt4.phonon python-qt4-phonon-dbg python3-pyqt4.phonon-dbg python-qt4-dbus python-qt4-dbus-dbg python3-dbus.mainloop.qt python3-dbus.mainloop.qt-dbg python-qt4-gl python-qt4-gl-dbg python3-pyqt4.qtopengl python3-pyqt4.qtopengl-dbg python-qt4-sql python3-pyqt4.qtsql python-qt4-sql-dbg python3-pyqt4.qtsql-dbg python-qt4-dev python-qt4-doc pyqt4-dev-tools Architecture: source i386 all Version: 4.9.3-4 Distribution: unstable Urgency: low Maintainer: Debian Python Modules Team python-modules-t...@lists.alioth.debian.org Changed-By: Scott Kitterman sc...@kitterman.com Description: pyqt4-dev-tools - Development tools for PyQt4 python-qt4 - Python bindings for Qt4 python-qt4-dbg - Python bindings for Qt4 (debug extensions) python-qt4-dbus - D-Bus Support for PyQt4 python-qt4-dbus-dbg - D-Bus Support for PyQt4 (debug extensions) python-qt4-dev - Development files for PyQt4 python-qt4-doc - Documentation and examples for PyQt4 python-qt4-gl - Python bindings for Qt4's OpenGL module python-qt4-gl-dbg - Python bindings for Qt4's OpenGL module (debug extension) python-qt4-phonon - Python bindings for Phonon python-qt4-phonon-dbg - Python bindings for Phonon (debug extensions) python-qt4-sql - Python bindings for PyQt4's SQL module python-qt4-sql-dbg - Python bindings for PyQt4's SQL module (debug extension) python3-dbus.mainloop.qt - D-Bus Support for PyQt4 with Python 3 python3-dbus.mainloop.qt-dbg - D-Bus Support for PyQt4 (debug extensions for Python 3) python3-pyqt4 - Python3 bindings for Qt4 python3-pyqt4-dbg - Python3 bindings for Qt4 (debug extensions) python3-pyqt4.phonon - Python3 bindings for Phonon python3-pyqt4.phonon-dbg - Python3 bindings for Phonon (debug extensions) python3-pyqt4.qtopengl - Python 3 bindings for Qt4's OpenGL module python3-pyqt4.qtopengl-dbg - Python 3 bindings for Qt4's OpenGL module (debug extension) python3-pyqt4.qtsql - Python3 bindings for PyQt4's SQL module python3-pyqt4.qtsql-dbg - Python3 bindings for PyQt4's SQL module (debug extension) Closes: 682623 Changes: python-qt4 (4.9.3-4) unstable; urgency=low
Processed: found 682623 in 4.9.1-5
Processing commands for cont...@bugs.debian.org: found 682623 4.9.1-5 Bug #682623 {Done: Scott Kitterman sc...@kitterman.com} [pyqt4-dev-tools] uicilibris: FTBFS: /bin/sh: 1: pyuic4: not found Bug #682626 {Done: Scott Kitterman sc...@kitterman.com} [pyqt4-dev-tools] qct: FTBFS: /bin/sh: 1: pyuic4: not found Bug #682628 {Done: Scott Kitterman sc...@kitterman.com} [pyqt4-dev-tools] hachoir-metadata: FTBFS: ERROR: Unable to compile dialog.ui to dialog_ui.py using pyuic4 Bug #682630 {Done: Scott Kitterman sc...@kitterman.com} [pyqt4-dev-tools] pysatellites: FTBFS: make[1]: pyuic4: Command not found Bug #682632 {Done: Scott Kitterman sc...@kitterman.com} [pyqt4-dev-tools] pyacidobasic: FTBFS: /bin/sh: 1: pyuic4: not found Bug #682635 {Done: Scott Kitterman sc...@kitterman.com} [pyqt4-dev-tools] dff: FTBFS: /bin/sh: 1: /usr/bin/pyuic4: not found Bug #682637 {Done: Scott Kitterman sc...@kitterman.com} [pyqt4-dev-tools] qgis: FTBFS: /bin/sh: 1: /usr/bin/pyuic4: not found Bug #682638 {Done: Scott Kitterman sc...@kitterman.com} [pyqt4-dev-tools] scolasync: FTBFS: /bin/sh: 1: pyuic4: not found Bug #682642 {Done: Scott Kitterman sc...@kitterman.com} [pyqt4-dev-tools] code-saturne: FTBFS: /bin/bash: /usr/bin/pyuic4: /usr/bin/python3: bad interpreter: No such file or directory Bug #682645 {Done: Scott Kitterman sc...@kitterman.com} [pyqt4-dev-tools] pymecavideo: FTBFS: /bin/sh: 1: pyuic4: not found Bug #682646 {Done: Scott Kitterman sc...@kitterman.com} [pyqt4-dev-tools] pyuic4 should use python, not python3 Bug #682649 {Done: Scott Kitterman sc...@kitterman.com} [pyqt4-dev-tools] yade: FTBFS: sh: 1: pyuic4: not found Marked as found in versions python-qt4/4.9.1-5. Marked as found in versions python-qt4/4.9.1-5. Marked as found in versions python-qt4/4.9.1-5. Marked as found in versions python-qt4/4.9.1-5. Marked as found in versions python-qt4/4.9.1-5. Marked as found in versions python-qt4/4.9.1-5. Marked as found in versions python-qt4/4.9.1-5. Marked as found in versions python-qt4/4.9.1-5. Marked as found in versions python-qt4/4.9.1-5. Marked as found in versions python-qt4/4.9.1-5. Marked as found in versions python-qt4/4.9.1-5. Marked as found in versions python-qt4/4.9.1-5. thanks Stopping processing here. Please contact me if you need assistance. -- 682623: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682623 682626: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682626 682628: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682628 682630: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682630 682632: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682632 682635: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682635 682637: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682637 682638: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682638 682642: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682642 682645: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682645 682646: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682646 682649: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682649 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682527: haskell-yesod-routes: FTBFS: Don't use ghc-ghci virtual-package-name on Build-Depends
On Tue, 2012-07-24 at 02:47 +0900, Hiroyuki Yamamoto wrote: In Debian, it is usual to not any but listed the architecture to build. Actually, no. Unless the package builds but is then either uninstallable or unusable on particular architectures, any is precisely the right choice for architecture-dependent packages. In this case, as a convenient example, it would mean that builds of the package will automatically get tried on any new architecture for which ghci is introduced (all other things being equal) without needing a source upload. Regards, Adam -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processed: limit source to request-tracker4, tagging 682133
Processing commands for cont...@bugs.debian.org: #request-tracker4 (4.0.6-4) UNRELEASED; urgency=low # # * Remove recommendation of libapache2-mod-fastcgi since this is #non-free (Closes: #682133) # limit source request-tracker4 Limiting to bugs with field 'source' containing at least one of 'request-tracker4' Limit currently set to 'source':'request-tracker4' tags 682133 + pending Bug #682133 [rt4-apache2] rt4-apache2: recommends non-free libapache2-mod-fastcgi Added tag(s) pending. thanks Stopping processing here. Please contact me if you need assistance. -- 682133: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682133 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processed: your mail
Processing commands for cont...@bugs.debian.org: retitle 682504 Vanilla standard live image kernel panics: init killed Bug #682504 [initramfs-tools] Kernel panic booting live iso hybrid image as USB: quirk_usb_early_handoff Changed Bug title to 'Vanilla standard live image kernel panics: init killed' from 'Kernel panic booting live iso hybrid image as USB: quirk_usb_early_handoff' reassign 682504 live-boot Bug #682504 [initramfs-tools] Vanilla standard live image kernel panics: init killed Bug reassigned from package 'initramfs-tools' to 'live-boot'. Ignoring request to alter found versions of bug #682504 to the same values previously set Ignoring request to alter fixed versions of bug #682504 to the same values previously set found 682504 3.0~a36-1 Bug #682504 [live-boot] Vanilla standard live image kernel panics: init killed Marked as found in versions live-boot/3.0~a36-1. notfound 682504 3.0~a35-1 Bug #682504 [live-boot] Vanilla standard live image kernel panics: init killed Ignoring request to alter found versions of bug #682504 to the same values previously set severity 682504 grave Bug #682504 [live-boot] Vanilla standard live image kernel panics: init killed Severity set to 'grave' from 'normal' End of message, stopping processing here. Please contact me if you need assistance. -- 682504: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682504 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#682691: [mysql-workbench] When quit MySQL Workbench, it get freezed
Probably this is somehow related to libglib 2.32... -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Processed: tagging 682691
Processing commands for cont...@bugs.debian.org: tags 682691 + confirmed upstream Bug #682691 [mysql-workbench] [mysql-workbench] When quit MySQL Workbench, it get freezed Added tag(s) upstream and confirmed. thanks Stopping processing here. Please contact me if you need assistance. -- 682691: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=682691 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org
Bug#679600: marked as done (libfile-mmagic-perl: infinite recursion in File::MMagic::checktype_contents)
Your message dated Wed, 25 Jul 2012 08:44:31 +0900 with message-id 87fw8g2080.wl%k...@daionet.gr.jp and subject line fixed in 1.29 has caused the Debian Bug report #679600, regarding libfile-mmagic-perl: infinite recursion in File::MMagic::checktype_contents to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact ow...@bugs.debian.org immediately.) -- 679600: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=679600 Debian Bug Tracking System Contact ow...@bugs.debian.org with problems ---BeginMessage--- Package: libfile-mmagic-perl Version: 1.28-1 Severity: serious Hi! Thank you for packaging File::MMagic for Debian. The following testcase: use strict; use warnings; use File::MMagic; my $mm = new File::MMagic; # use internal magic file open my $fh, '', '/etc/debian_version'; my $data = $fh; my $res = $mm-checktype_contents($data); Triggers: Deep recursion on subroutine File::MMagic::checktype_contents at /usr/share/perl5/File/MMagic.pm line 633, $fh line 1. Downgrading to 1.27-1 fixes the bug for me. Cheers. ---End Message--- ---BeginMessage--- The bug was fixed in upstream 1.29. I added some test suites with this bug.---End Message---
Bug#682504: Vanilla standard live image kernel panics: init killed
I retested with a simpler config, just the 'standard' list this time, but otherwise the same as before. Also, I turned on 'set -x' in the init script in initramfs to see what was happening. It turns out the crash occurs in the middle of live-bottom scripts, and that's when I began to suspect live-boot. I then went back over the logs for various recent test images I have built, and found I hadn't had any successes yet with the new live-boot 3.0~a36-1, so I rebuilt again with the vanilla standard config, but this time reverting to live-boot 3.0~a35-1 and the problem disappeared. So, clearly the problem was introduced in 3.0~a36-1, though in the limited time I had available to test I was unable to determine exactly where. My main problem is that from one test run to the next I don't necessarily see the same last line output from init before it dies, so I can't be certain which line(s) of the scripts caused init to die. Ben -- To UNSUBSCRIBE, email to debian-bugs-rc-requ...@lists.debian.org with a subject of unsubscribe. Trouble? Contact listmas...@lists.debian.org