Circa un'ora fa vado ad accendere il pc e questo non
parte; allora metto il disco di rescue: parte ma ad un certo punto si
ferma dicendo: hda lost interrupt.
Dopo un'oretta riprovo e va tutto ok.
riprovo e mi da lo stesso messaggio..poi e' ripartito.
Ho lanciato badblocks e non mi dava alcun errore, sino a che non e'
partito lo stesso messaggio: hda lost interrupts.
Si e' scassato l'HD?
sarebbe utile lanciare un e2fsck -p ? se si come fare a smontare la
partizione che voglio analizzare?
sara' un caso ma oggi ho installato un kernekl nuovo 2.4.19, e
erroneamente ho cancellato lilo.conf. Allora l'ho preso da un altro pc
con su debian ovviamente
athlon:/home/gianni# cat /etc/lilo.conf
# /etc/lilo.conf - See: `lilo(8)' and `lilo.conf(5)',
# --- `install-mbr(8)', `/usr/share/doc/lilo/',
# and `/usr/share/doc/mbr/'.
# +---+
# |!! Reminder !! |
# | |
# | Don't forget to run `lilo' after you make changes to this |
# | conffile, `/boot/bootmess.txt', or install a new kernel. The |
# | computer will most likely fail to boot if a kernel-image |
# | post-install script or you don't remember to run `lilo'. |
# | |
# +---+
# Support LBA for large hard disks.
#
lba32
# Overrides the default mapping between harddisk names and the BIOS'
# harddisk order. Use with caution.
#disk=/dev/hde
#bios=0x81
#disk=/dev/sda
#bios=0x80
# Specifies the boot device. This is where Lilo installs its boot
# block. It can be either a partition, or the raw device, in which
# case it installs in the MBR, and will overwrite the current MBR.
#
boot=/dev/hda
# Specifies the device that should be mounted as root. (`/')
#
#root=/dev/hda2
# Enable map compaction:
# Tries to merge read requests for adjacent sectors into a single
# read request. This drastically reduces load time and keeps the
# map smaller. Using `compact' is especially recommended when
# booting from a floppy disk. It is disabled here by default
# because it doesn't always work.
#
# compact
# Installs the specified file as the new boot sector
# You have the choice between: bmp, compat, menu and text
# Look in /boot/ and in lilo.conf(5) manpage for details
#
install=/boot/boot-menu.b
# Specifies the location of the map file
#
map=/boot/map
# You can set a password here, and uncomment the `restricted' lines
# in the image definitions below to make it so that a password must
# be typed to boot anything but a default configuration. If a
# command line is given, other than one specified by an `append'
# statement in `lilo.conf', the password will be required, but a
# standard default boot will not require one.
#
# This will, for instance, prevent anyone with access to the
# console from booting with something like `Linux init=/bin/sh',
# and thus becoming `root' without proper authorization.
#
# Note that if you really need this type of security, you will
# likely also want to use `install-mbr' to reconfigure the MBR
# program, as well as set up your BIOS to disallow booting from
# removable disk or CD-ROM, then put a password on getting into the
# BIOS configuration as well. Please RTFM `install-mbr(8)'.
#
# password=tatercounter2000
# Specifies the number of deciseconds (0.1 seconds) LILO should
# wait before booting the first image.
#
delay=20
# You can put a customized boot message up if you like. If you use
# `prompt', and this computer may need to reboot unattended, you
# must specify a `timeout', or it will sit there forever waiting
# for a keypress. `single-key' goes with the `alias' lines in the
# `image' configurations below. eg: You can press `1' to boot
# `Linux', `2' to boot `LinuxOLD', if you uncomment the `alias'.
#
# message=/boot/bootmess.txt
# prompt
# single-key
# delay=100
# timeout=100
# Specifies the VGA text mode at boot time. (normal, extended, ask, mode)
#
# vga=ask
# vga=9
#
vga=normal
# Kernel command line options that apply to all installed images go
# here. See: The `boot-prompt-HOWO' and `kernel-parameters.txt' in
# the Linux kernel `Documentation' directory.
#
# append=
# Boot up Linux by default.
#
default=2.4.19
image=/vmlinuz.old
label=2.2.20
read-only
root=/dev/hda5
append=/dev/hdc=ide-scsi
# restricted
# alias=1
image=/boot/2.4.19/vmlinuz
label=2.4.19
read-only
root=/dev/hda5
append=/dev/hdc=ide-scsi
# restricted
# alias=2
hd nuovo?
comunque ora sono su quella macchina e sto scrivendo senza problemi.
grazie gianni
