2.6.16-1 hyper logging
Hi, 2.6.16-1 is a bit too much logging: kernel: evbug.c: Event. Dev: adb2:2.c4/input, Type: 0, Code: 0, Value: 0 kernel: evbug.c: Event. Dev: powermac/beep, Type: 18, Code: 2, Value: 0 Quite 20 lines per second ! Is there a var to change via /proc/sys or is it necessary to recompile the kernel with less logging ? -- Jean-Christophe Michel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
no keyborad with xorg on Pismo/unstable
Hi, I updated and migrated from xfree86 to xorg on my unstable Pismo. But I'm not able to keep a working keyboard similar with mac layout. The generated xorg.conf contains: Section InputDevice Identifier Generic Keyboard Driver keyboard Option CoreKeyboard Option XkbRules xfree86 Option XkbModel macintosh Option XkbLayout fr_new Option XkbOptionsctrl:nocaps EndSection (fr_new comes from http://www.linux-france.org/macintosh/clavier_v4.html) All attempts I made to change this setting leads to a non working keyboad in Gnome. Currently I'm writing from Xfe where I get a keyboard working, though without any accentuated chars. I don't get the pipe neither :/ Anyone already experienced an xorg switch on an old pwb with adb kbd ? -- Jean-Christophe Michel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: no keyborad with xorg on Pismo/unstable
Hi, Bin Zhang wrote: Anyone already experienced an xorg switch on an old pwb with adb kbd ? I had a similar problem on my ibook after upgrade from xorg6 to xorg7. I had to copy fr_new to /usr/share/X11/xkb/symbols/macintosh_vndr/fr. Using the name fr_new didn't work. My config : Section InputDevice IdentifierGeneric Keyboard Driverkbd OptionCoreKeyboard OptionXkbRulesxorg OptionXkbModelmacintosh OptionXkbLayoutfr EndSection Many thanks ! very good advice, it works now: éà|\ ! I digged into this for some hours without any result :/ I didn't find any doc about the place where kbds were placed; I thought they were in /etc/x11/xkb/symbols/macintosh :( The driver name changed from keyboard to kbd too. Why was there no warning in paquet install ? :(( -- Jean-Christophe Michel -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
read dvd with iso-8859-1 charset under os x
Hi, I use xcdroast to burn backup dvds under debian unstable/2.6.6, where locale are iso-8859-1. Source is a volume shared with netatalk. Mounting dvds under debian work fine, I see all filenames wiht accentuated chars. But mounting under macos x, I get all accentuated filenames truncated, and some dirs seem to be empty. What options should i check to be able to read dvds under os x ? (Dvd burned with cdrecord-ProDVD, Rockridge archive option, -input-charset=iso8859-1). -- Jean-Christophe Michel
install yaboot (after switching hd in a powerbook)
Hi, I'm stuck in my hd switching. I used to have a dual boot Powerbook Firewire G3 (debian unstable/os9), and i prepared a second hd in an external firewire box with partitions for debian, osx and 9. I installed osx and 9 fine on this external disk, and mounted it from debian to copy my debian partitions using tar cf - . | (cd /mnt; tar xf -). I changed /etc/yaboot.conf to reflect my new partitions but cannot succeed in running ybin. [By the way i couldn't shutdown or telinit 1 in single user mode, had to stop manually most processes; maybe a debian ppc bug] I switched the internal and external disks. Booting in osx and os9 works; even with 'alt' key i cannot see the debian partition. I found no way to have open firmware boot on hd:9 (bootstrap) or 11 (debian), nor from external firewire debian partition (i found the device name in OF but it hangs just after kernel launching :( So the question is: how can i add yaboot in hd:9 ? - imo i need booting in debian first; but i have no working cd/dvd :((( + Would it be possible from a debianppc iso with a firewire dvd reader ? + Would it be possible from my old hd ? what need i do for it to boot ? - without booting under debian, is there a way to copy yaboot files and initrd to a partition ? even if macosx and 9 are hfs+ ? I can still reinit and reinstall all but it'll be long :(( Thks to all suggestions. PS: here is my partition scheme (to prove all's right there :) pwbjcm:/home/jc# mac-fdisk /dev/sda /dev/sda Command (? for help): p /dev/sda #type name length base ( size ) system /dev/sda1 Apple_partition_map Apple 63 @ 1 ( 31.5k) Partition map /dev/sda2 Apple_Driver43 Macintosh 56 @ 64( 28.0k) Driver 4.3 /dev/sda3 Apple_Driver43 Macintosh 56 @ 120 ( 28.0k) Driver 4.3 /dev/sda4Apple_Driver_ATA Macintosh 56 @ 176 ( 28.0k) Unknown /dev/sda5Apple_Driver_ATA Macintosh 56 @ 232 ( 28.0k) Unknown /dev/sda6 Apple_FWDriver Macintosh512 @ 288 (256.0k) Unknown /dev/sda7 Apple_Driver_IOKit Macintosh512 @ 800 (256.0k) Unknown /dev/sda8 Apple_Patches Patch Partition 512 @ 1312 (256.0k) Unknown /dev/sda9 Apple_Bootstrap bootstrap 1600 @ 1824 (800.0k) NewWorld bootblock /dev/sda10Apple_UNIX_SVR2 swap 2097152 @ 3424 ( 1.0G) Linux swap /dev/sda11Apple_UNIX_SVR2 root59112768 @ 2100576 ( 28.2G) Linux native /dev/sda12 Apple_HFS Apple_HFS_Untitled_3 37671360 @ 61213344 ( 18.0G) HFS /dev/sda13 Apple_Free 262144 @ 98884704 (128.0M) Free space /dev/sda14 Apple_HFS Apple_HFS_Untitled_4 18063376 @ 99146848 ( 8.6G) HFS /dev/sda15 Apple_Free 16 @ 117210224 ( 8.0k) Free space
Re: Bluetooth + kernel 2.6.3-ben2 doesn't work
Le lun 23/02/2004 à 10:05, Klaus Ita a écrit : Hi rusty! surfing the web via my palm/bluetooth right now ... uname -a Linux aibuk 2.6.3-ben2-20040222 #1 Sun Feb 22 18:35:59 CET 2004 ppc GNU/Linux modules involved: ohci_hcd, hci_usb, hci_vhci regs Please can you provide the right kernel options to compile these modules ? modprobe hci_usb gives me a 'FATAL: Module hci_usb not found' answer. -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
read and recover files from a damaged osx disk
Hi, I'm trying to recover some files from a damaged pwb 2.5 disk (hence hfs+ partitions). Via Firewire nothing mounted. I plugged it on ide chain in a 386 debian machine and used dd to copy partitions to files (noerror,sync). Sharing these files with my debian pwb (via nfs) i try to mount them with mount -t hfsplus -o loop,ro partition-file /point but it complains about too much loop used or inconsistent volume header. I think it's the header that's damaged. What can be done ? Copying the header from a valid hfs+ volume ? I tried too to load these recovered partitions-files under macosx too, but appending .img is not enough to have them mounted :( Ideas ? -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
firewire damaged disk
Hi all, I'm trying to make a lowlevel copy of a damaged ide 2.5 hd (using dd). I placed it in an external firewire box, and when plugged in to my debian unstable 2.4.23-ben1 pismo, i get in syslog: 18:42:55 kernel: ieee1394: Stopping reset loop for IRM sanity 18:42:55 kernel: scsi1 : SCSI emulation for IEEE-1394 SBP-2 Devices 18:42:55 kernel: blk: queue ef7b2814, I/O limit 4095Mb (mask 0x) 18:42:56 kernel: ieee1394: sbp2: Logged into SBP-2 device 18:42:56 kernel: ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload [2048] 18:42:56 kernel: ieee1394: Node added: ID:BUS[0-00:1023] GUID[0030e001eb80] 18:42:56 ieee1394.agent[4605]: kernel driver sbp2 already loaded And nothing more. If i try dumpe2fs /dev/sda : dumpe2fs 1.35-WIP (21-Aug-2003) dumpe2fs: Aucun périphérique ou adresse while trying to open /dev/sda sr0 or sda0 to 15 don't give a better result. I think the disk isn't loaded at all. Is there a lower level to address a disk via firewire ? -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
Re: gconf messed in sid and downgrading
Le lun 01/12/2003 à 19:21, Michel Dänzer a écrit : Second question: why isn't it possible to have a real console (plain screen) with F2 or F3 ? never worked here. Failsafe console is only a quarter screen ;( Doesn't ctrl-alt(-fn)-Fx work for you? No. Just rebuilt last benh kernel, and ctrl-alt-fn-F1 doesn't work. Can it be linked to the french keyboard i use ? -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
gconf messed in sid and downgrading
Hi, I made the error of upgrading my sid/gnome two days ago. This changed gconf2 to 2.4 and i lost evolution-mail; one of the messages asked to log out and in again. When trying to login into gnome, i was warned the session didn't last 10s, because gnome-check-config-2 didn't pass. The only way for me to see gnome back was to change /usr.lib/gconf2/gnome-check-config-2 and set a stupid script returning 0 instead. But now i have only evolution, all menus, icons... are messed up. I know all this is probably related to the repository being broken. What solution can you suggest me to downgrade last upgrade ? local .debs were deleted :( and i have no console under gnome. Second question: why isn't it possible to have a real console (plain screen) with F2 or F3 ? never worked here. Failsafe console is only a quarter screen ;( Thks for help, i'm a bit paralyzed there. -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
Re: gconf messed in sid and downgrading
Ignore this mail, i changed apt/preferences then recovered a consistent system. Only remains this: why isn't it possible to have a real console (plain screen) with F2 or F3 ? never worked here.
max_charge and pmu reset on Pismo
Hi, I purchased a renewed battery from a third-party who'd able to change Li elements in my old Pismo battery. But despite some cycles, max_charge doesn't increase. I tried many things to reset pmu, i tried to boot with os9 and make a cycle but max_charge is always sticked to 394. What can i do more ? Does PowerManager store the battery max charge or is it inside the battery ? How can this number be changed ? -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
Re: max_charge and pmu reset on Pismo
Le lun 17/11/2003 à 15:30, vinai a écrit : You might want to reset all your hardware through Open Firmware. To do this, when your PB boots, hold down the Apple-Option-o-f key combination and at the prompts, type: reset-nvram reset-all Tried this, and i stopped pmud (/etc/init.d/pmu stop ) adn my renewd battery gives -1087 current (1 A ?) with a 11241 voltage and charge of 1 for more than 90 min... Will see if when charging it will change max_charge. -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
Re: max_charge and pmu reset on Pismo
Le lun 17/11/2003 à 18:36, Jean-Christophe Michel a écrit : Le lun 17/11/2003 à 15:30, vinai a écrit : You might want to reset all your hardware through Open Firmware. To do this, when your PB boots, hold down the Apple-Option-o-f key combination and at the prompts, type: reset-nvram reset-all Tried this, and i stopped pmud (/etc/init.d/pmu stop ) This was the solution. 1. pmu reset 2. stopping pmu then wait till second battery begins to be used. Then plug in, and miracle! here# more /proc/pmu/battery_0 flags : 0011 charge : 2 max_charge : 394 current: 0 voltage: 11379 time rem. : 0 here# more /proc/pmu/battery_0 flags : 0013 charge : 447 max_charge : 4574 current: 2043 voltage: 11635 time rem. : 7272 -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
Re: error compiling mol modules
Le jeu 06/11/2003 à 08:55, Jens Schmalzing a écrit : Hi, Jean-Christophe Michel writes: Hi, I tried to use make-kpkg modules_image and got: [...] Module /usr/src/modules/mol failed. I'm on unstable kernel 2.4.21-ben2. What version of mol are you using? Are you sure you unpacked the installed tarball so you are not attempting to build an obsolete version? You were right, i forgot to unpack it. Another bug now: dpkg-gencontrol: error: source paragraph in control info file is missing Source line dh_gencontrol: command returned error code 6400 make[2]: *** [binary-mol-modules] Erreur 1 make[2]: Leaving directory `/usr/src/modules/mol' make[1]: *** [kdist_image] Erreur 2 make[1]: Leaving directory `/usr/src/modules/mol' Module /usr/src/modules/mol failed. Hit return to Continue -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
Re: error compiling mol modules
Le jeu 06/11/2003 à 19:36, Jens Schmalzing a écrit : dpkg-gencontrol: error: source paragraph in control info file is missing Source line This is an old bug that reflects a change in dpkg and is fixed in the current version. Just upgrade to that version and you'll be fine. Right. Strange that aptitude didn't automatically upgraded. I still have some errors... startmol: mac-on-Linux 0.9.69 Copyright (C) 1997-2003 Samuel Rydh Starting MOL session 0 Fatal error: Error: The MOL kernel module is not loaded lsmod: Module Size Used byNot tainted mol48548 0 (unused) sheep 5072 0 (unused) ... -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
error compiling mol modules
Hi, I tried to use make-kpkg modules_image and got: make[3]: Entering directory `/usr/src/modules/mol/kernel_module' cpp -D__ASSEMBLY__ -D__KERNEL__ -DMODULE -I./ -I./include -I/usr/src/modules/mol/sinclude -I- -I/usr/src/benh_kernel/include traps.S | as -o obj/traps.o Dans le fichier inclus à partir de traps.S:420: ptintercept.S:316:1: attention : pas de retour chariot à la fin du fichier emulation.S: Messages de l'assembleur: emulation.S:527: ERREUR: trop d'arguments positionnels emulation.S:527: ERREUR: trop d'arguments positionnels emulation.S:527: ERREUR: trop d'arguments positionnels emulation.S:527: ERREUR: trop d'arguments positionnels emulation.S:527: ERREUR: trop d'arguments positionnels emulation.S:527: ERREUR: trop d'arguments positionnels emulation.S:527: ERREUR: trop d'arguments positionnels emulation.S:527: ERREUR: trop d'arguments positionnels emulation.S:527: ERREUR: trop d'arguments positionnels emulation.S:527: ERREUR: trop d'arguments positionnels emulation.S:527: ERREUR: trop d'arguments positionnels emulation.S:527: ERREUR: trop d'arguments positionnels emulation.S:527: ERREUR: trop d'arguments positionnels emulation.S:527: ERREUR: trop d'arguments positionnels emulation.S:527: ERREUR: trop d'arguments positionnels emulation.S:527: ERREUR: trop d'arguments positionnels make[3]: *** [obj/traps.o] Erreur 1 make[3]: Leaving directory `/usr/src/modules/mol/kernel_module' make[2]: *** [modules] Erreur 2 make[2]: Leaving directory `/usr/src/modules/mol' make[1]: *** [build-stamp] Erreur 2 make[1]: Leaving directory `/usr/src/modules/mol' Module /usr/src/modules/mol failed. I'm on unstable kernel 2.4.21-ben2. Is it debian related ? what's wrong in my config ? -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
evolution and ical
Hello, What is the good solution to have some people exchange their calendars when they use iCal or Evolution ? Is there any free solution ? -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
Re: change internal hd
Le jeu 09/10/2003 à 18:21, Jens Schmalzing a écrit : Here you go, please ask if you want more detail on any of the steps. Put new drive in enclosure Plug enclosure into computer Partition new drive, make filesystems, transfer files Unplug enclosure from computer Shutdown computer Remove new drive from enclosure Remove old drive from computer Put new drive in computer Put old drive in enclosure Boot computer Thks! My question is: how to transfer kernel and boot things, and hfs partitions onto the new disk ? simply dd ? or reinstall with netinstall ? -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
Re: Subject: Power management support in ALSA PowerMac audio driver?
Le dim 05/10/2003 à 21:24, gm c a écrit : I've recently acquired (ok, my employer purchased off eBay) a PowerBook Pismo, which I installed Debian on. I've got pretty much everything running nicely - DVD/multimedia playback, wireless networking, PCMCIA, power management, etc. I'd like to switch to the ALSA driver for sound support, but from what I've been able to gather, it doesn't sound like the ALSA AWACS/PowerMac driver has any support for power management features. On mine I changed /etc/power/pwrctl adding in pwrctl_Core99() : sleep) # stop esd which used alsa killall esd # stop alsa /etc/init.d/alsa force-stop and wakeup) # maybe force wakeup of media bay devices? # restart alsa /etc/init.d/alsa start # start esd /usr/bin/esd But it still hangs sometimes :( in fact force-stop appears to fail sometimes, i don't know why. -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
vpn for net/apple-talk
Hi, Tkhs to your help, netatalk in testing is well working here. Now i'd like to access the netatalk server from outside the network; i plan to use the firewall (shorewall) to redirect a port to appletalk; are there some traps to avoid doing this ? -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
alsa help
Hi all, Please, i need some help to have alsa give me some sound on my Pismo/2.4.21-ben2/unstable Alsa is compiled, i have sound with esd (gnome), but i cannot play a mp3 file with xmms : error opening alsa device impossible to open audio, check output plugin... Output plugin is ALSA 0.9 libALSA.so user defined: audio; mixer card:0; mixer device: PCM lsmod | grep snd Module Size Used byNot tainted snd-seq-oss29972 0 (unused) snd-seq-midi-event 3616 0 [snd-seq-oss] snd-seq44144 2 [snd-seq-oss snd-seq-midi-event] snd-seq-device 4984 0 [snd-seq-oss snd-seq] snd-pcm-oss44724 1 snd-mixer-oss 13920 0 [snd-pcm-oss] snd-powermac 34980 1 snd-pcm66164 0 [snd-pcm-oss snd-powermac] snd-timer 16564 0 [snd-seq snd-pcm] snd-page-alloc 4900 0 [snd-pcm] snd34376 0 [snd-seq-oss snd-seq-midi-event snd-seq snd-seq-device snd-pcm-oss snd-mixer-oss snd-powermac snd-pcm snd-timer] The alsa lists focuse on pc sound cards, and i found no helpful man for ppc. Thks -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
Re: alsa help
Le ven 26/09/2003 à 10:26, Kai Lauterbach a écrit : Hi, just change the xmms settings to the OSS output plugin done (look for access rights at /dev/dsp) /dev/mixer 660 root:audio /dev/dsp 660 root:audio and i'm in audio group or use the ESD output plugin if you run the ESD. ps -A | grep esd shows esd running, but i have no xmms esd output plugin And i still have the pwb hanging regularly when i awake it, though i killall alsa in pwctl script. Thanks for help -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
Re: netatalk and os X
Le mer 24/09/2003 à 10:20, Michael Schmitz a écrit : I hava a netatalk server to share data among macs; one of them changed to osx recently, he couldn't write dirs without a Error -50. I upgraded the server from woody to testing, so i have netatalk 1.6 but things are worse: main shared dir is seens as empty. Works out of the box here. Look at the netatalk server syslog, netatalk is quite verbose in logging warnings and errors. Was a rights pb on .AppleDB dir. Tkhs, seems to work well now. Just a last thing: is there a mean to reactivate crypted passwd identification instead of clear text ? -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
netatalk and os X
Sorry for this question a bit OT, but i think that mac user are the one that use mostly netatalk. I hava a netatalk server to share data among macs; one of them changed to osx recently, he couldn't write dirs without a Error -50. I upgraded the server from woody to testing, so i have netatalk 1.6 but things are worse: main shared dir is seens as empty. Where could i find what options make it work with os x? netatalk.sf.net isn't the place, i already tried to read all... -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
Re: powerbook freeeze on awakening
Le mer 27/08/2003 à 23:33, Jean-Christophe Michel a écrit : Hi, 2.4.21-ben2, on pismo, unstable. Sometimes the screen freezes on a maxi zoom of some screen part when awakening. I hava alsa and i stop it before closing. Ok, i needed to kill esd and so alsa can be killed before sleeping. Details: I added to /etc/power/pwrctl sleep) # stop esd which used alsa killall esd # stop alsa /etc/init.d/alsa force-stop and wakeup) # maybe force wakeup of media bay devices? # restart alsa /etc/init.d/alsa start # start esd /usr/bin/esd Maybe the alsa maintainer will want to to this for Core99 boxes in the package ;-) -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
Re: recompiling alsa module w kernel 2.4.21-ben2
Much thanks. I succeeded with your help. The script in alsa-driver needed to be runned despite the /dev/mixer and all devices were there. -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
powerbook freeeze on awakening
Hi, 2.4.21-ben2, on pismo, unstable. Sometimes the screen freezes on a maxi zoom of some screen part when awakening. I hava alsa and i stop it before closing. When frozen, even ssh from another box is impossible. What can i suspect ? -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
recompiling alsa module w kernel 2.4.21-ben2
Hi, I'm on a Pismo 500 laptop on unstable. I cannot use sound, i have no module alsa. grep ALSA /usr/src/benh_kernel/.config shows nothing. I tried to load alsa-source but don't know how to compile it with make-kpkg : modules target builds /usr/src/modules and not /lib/modules... Is sound not working linked to a bad kernel config ? How do i compile alsa ? do i need to ? Thks -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
gprs, bluetooth and t68i
Hi, I'm trying to connect using gprs (in France) with debian unstable, benh kernel last rsync vers + bluez + a t68i from SonyErikson phone. Unfortunately i cannot go further than seeing the phone and its services, and trying to connect to the phone via /dev/rfcomm0 linked to channel 1 (DUN) of the phone. I tried many ppp confs and i'm really unsure on how to do this. This phone works well on OSX (someone I know who uses the same phone company). When i do pon, i see the pppd process hanging just before ip negociation.Phone is 'COnnecting...' forever. Thks for help if someone ever succeeded in making this config work. -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
bluetooth, gprs
Hi all, I'm considering the purchase of a gprs/bluetooth phone and wonder if some of you succeeded in getting such thing work (it works under OSX :) What are the traps to avoid ? (i'm in sid) -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
Re: Problems with PHP4 MySQL Packages
Le lun 23/06/2003 à 06:53, Eric Pretorious a écrit :
Hello, All:
I'm stumped: I'm using Debian 3.0 (Woody) on a PowerBook Lombard and can't
get the PHP package (php4 4.1.2-6 and php4-mysql 4.1.2-6) and the MySQL
package (mysql-server 3.23.49-8) to play nicely together. This script...
?php
$connect = mysql_pconnect('localhost','sample_user','sample_passwd');
mysql_select_db('sample_db',$connect);
$sql = 'SELECT * FROM names WHERE userid = ' . $somenumber;
$result = mysql_query($sql, $connect);
var_dump($row);
?
...causes apache to die. (i.e., nothing is returned to the browser.)
/var/log/apache/error.log contains [notice] child pid [#] exit signal
Segmentation fault (11) for _every_ active apache child process where #
is the pid for the apache process.
Why is this happening?
var_dump is boggus on this version.
Use a workaround :
?php
// (c) jean-christophe michel 2002
function my_var_export($v, $ret=false) {
if (is_null($v)) return 'null';
$res = '';
if (is_array($v)) {
$res = ' array(';
$virg = '';
foreach ($v as $_k = $_v) {
$res .= $virg.my_var_export($_k, true).' = '.my_var_export($_v, true);
$virg = ,\n;
}
$res .= ')';
} elseif (is_string($v)) {
$res = '.str_replace(',\',$v).';
} elseif (is_bool($v)) {
$res = ($v)?'true':'false';
} else {
$res = $v;
}
if ($ret) {
return $res;
} else {
echo $res;
}
}
?
--
Jean-Christophe Michel [EMAIL PROTECTED]
Symétrie
Re: segfault php4
Le sam 24/05/2003 à 22:01, Chris Tillman a écrit : On Sat, May 24, 2003 at 09:20:43PM +0200, Jean-Christophe Michel wrote: Le sam 24/05/2003 à 17:49, Jean-Christophe Michel a écrit : I get a strange segfault error on some php4 files that used to work, since last update on unstable. Some file work, some don't. Do some of you encounter the same errors on php4 used with apache ? I guess it's linked with some lib, but have no clue. I progress: i got a MMCACHE: PHP crashed on opline 38 of get_declared_classes() at ...Classes.php:47 So MMCACHE (libmm13 in this last php4 version) and php have problems... Linux 2.4.20 benh on powerpc, Package: php4 4:4.2.3-14 debian unstable. STL, I recall reading somewhere that php is broken. Where did you get this info ? I'm now sure that the error comes from get_object_vars(). But on Woody/intel the same code works perfectly. -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
segfault php4
Hi all, I get a strange segfault error on some php4 files that used to work, since last update on unstable. Some file work, some don't. Do some of you encounter the same errors on php4 used with apache ? I guess it's linked with some lib, but have no clue. -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
Re: segfault php4
Le sam 24/05/2003 à 17:49, Jean-Christophe Michel a écrit : I get a strange segfault error on some php4 files that used to work, since last update on unstable. Some file work, some don't. Do some of you encounter the same errors on php4 used with apache ? I guess it's linked with some lib, but have no clue. Seems to be related to libmm13... -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
Re: segfault php4
Le sam 24/05/2003 à 17:49, Jean-Christophe Michel a écrit : I get a strange segfault error on some php4 files that used to work, since last update on unstable. Some file work, some don't. Do some of you encounter the same errors on php4 used with apache ? I guess it's linked with some lib, but have no clue. I progress: i got a MMCACHE: PHP crashed on opline 38 of get_declared_classes() at ...Classes.php:47 So MMCACHE (libmm13 in this last php4 version) and php have problems... Linux 2.4.20 benh on powerpc, Package: php4 4:4.2.3-14 debian unstable. -- Jean-Christophe Michel [EMAIL PROTECTED] Symétrie
possible php bug on powerpc/4.2.3
Hi all,
var_export() seems to print delirious contents when printing an array:
only the first two or three values are correctly printed. Then it seems
to be like utf8 printed in iso-latin1...
I experienced this on a powerpc/testing with php as cgi and module,
php -v gives 4.2.3.
Could someone have the same test on some other machines ?
I don't know if it's a php bug or a ppc pkg one... though there's no bug
report till now on bugs.php.net.
Here is a code to test:
// file test.php
?php
echo 'var_export testbr';
$a = array('hello', 'bonjour', 'Guten Tag', 'Hayo', 'Salam', 'Buon
giorno');
var_export($a);
// you can try too
// echo var_export($a, true);
?
--
Jean-Christophe Michel
[EMAIL PROTECTED]
Re: possible php bug on powerpc/4.2.3
Le mer 02/04/2003 à 09:49, Jean-Christophe Michel a écrit : Hi all, var_export() seems to print delirious contents when printing an array: only the first two or three values are correctly printed. Then it seems to be like utf8 printed in iso-latin1... The package maintener, Adam Conrad, just anwered me that it was fixed in 4.3.x that will soon be packaged. -- Jean-Christophe Michel [EMAIL PROTECTED]
sawfish, x, nedit problems on testing
Hi all, On testing I have recently got some problems that apt-get reinstall didn't solve. Sawfish regularly disappear, letting windows' content alone; i have to switch to twm in gnome control center to get some control back. Nedit too cannot anymore support more than one open window: it's impossible to write in a second open text file. Is there a parameter in XFree to correst this ? (I'm always on Gnome 1.4). Thks if you can help.
php4 package broken
Hi, I use a testing on Pismo G3. After I made a dist-upgrade to update all packages on hold, aptitude asked to remove php4 package because an unmet dependancy with libc6 (it seems to me...) I need php4. How can I 1. downgrade to have previous version back 2. get php4 from unstable without upgrading all ? (I tried to add a line with unstable in sources.list and put in preferences Package: * Pin: release a=testing Pin-Priority: 800 Package: * Pin: release a=stable Pin-Priority: 100 Package: php4* Pin: release a=unstable Pin-Priority: 1100 but apt-get update hangs on E: Dynamic MMpa ran out of room E: Error occured while processing xxdiff (NewVersion1) E: Problem with MergeList /var/lib/apt/lists/ftp.u-strasbg.fr_debian_dists_unstables_main_binary-powerpc_Packages
sawfish hangs
Hi, I use woody/testing on Pismo 500MHz, mainly with GNOME. For two days, sawfish hangs : it seems to disappear completly when a window is iconified. I have to use gnome conf center to switch to twm and then to sawfish back so as i see window frames. I already tried to reinstall with apt-get install --reinstall sawfish-gnome gnome-session but this wasn't enough... Do you have an idea why sawfish hangs ? what can be done to correct this ? (use gnome 2 maybe ?) jc
Re: french keyboard for pwb/testing
Le ven 21/02/2003 à 05:09, Chris Tillman a écrit : On Thu, Feb 20, 2003 at 08:10:47PM +0100, Eric Boese-Wolf wrote: Just download the package you used before. dpkg -e console-data-previous version.deb . then copy the stuff you need, where you need it ;) If think it will go from ./usr/share/keymaps/azerty/blah to /usr/share/keymaps/azerty/blah use install-keymap to load it and copy it to /etc/console-data/bootkeymap.ffasd.gz or something like that. Also, your old keymap is probably hanging around in /etc/console/boottime.old.kmap.gz Thx. Console was easily fixed. Problems remains for X, I have no brace, pipe... chars. Here's my XF86Config-4 section: Section InputDevice Identifier Generic Keyboard Driver keyboard Option CoreKeyboard Option Xkbrulesxfree86 Option XkbModelmacintosh Option XkbLayout fr_new EndSection The file in xkb/symbols/macintosh/fr_new seems very good (modified by Etienne Herlent and martin Costabel) but when I create a new XConsole, there's still no brace nor pipe... Should this file be in xkb/symbols ? Is there something to change in keymaps to catch alt/option key as a modifier ? Tks to all -- Jean-Christophe Michel [EMAIL PROTECTED]
other brands airport cards
Hi, Do you know if the new cards like the D-Link DWL-650+ (pcmcia 22Mbps, 256bits crypt) would be recognized on a powerbook (Pismo) with debian ? Or is it necessary to bui Apple's cards ? -- Jean-Christophe Michel [EMAIL PROTECTED]
french keyboard for pwb/testing
Hi all, I upgraded from woody to testing, and therefore I lost my special chars on the french powerbook keyboard. Is there some repository to load a keyboard 'azerty' with common symbols such as tilde, pipe, braces... ? or do I have to rebuild my own keymap ? Tkx -- Jean-Christophe Michel [EMAIL PROTECTED]
is gnome 2 closer to OS X than 1.4 ?
Hi, it's not a troll. I run successfully woody/benh on pwb Pismo (500 MHz) for some months, using Gnome 1.4. When I compare to mac OSX I'd like to have characters smoothing, copy/paste working between apps (Mozilla/console/editors) and I wonder if Gnome2 would have this features. Is it best to try to install Gnome 2 on woody or switch to testing ? Does mol (mac os 9.2) work with testing ? Are gnome-pim and gnome-think more powerful in testing ? Thks -- Jean-Christophe Michel [EMAIL PROTECTED]
netatalk
Hello, How can I make my home dir from debian visible on mol/macos 9 ? I can see it from other macs on the LAN, but not on my own machine :p What did I miss in configuration ? -- Jean-Christophe Michel [EMAIL PROTECTED]
alias and symbolic links with netatalk
Hi all, I didn't find any info about why symbolic links on a disc are not seen as aliases by mac user via netatalk. How is it possible to share a common directory on a Linux box among many mac users ? -- Jean-Christophe Michel [EMAIL PROTECTED]
mol sees only one disk
Hi all, mol 0.9.61 on a powerbook/woody starts and sees only one disk. I have in /etc/molrc blkdev: /dev/hda13 -rw boot blkdev: /dev/hda12 -rw hda12 mounts well when I boot in MacOS9, and doesn't mount under mol. Some tips ? -- Jean-Christophe Michel [EMAIL PROTECTED]
sawfish segfault
Hi all, Since I got sound working on my Pismo/Woody/GNOME/benh kernel 2.4.20-pre11-ben0 (by setting /dev/mix... as found in one mess here) I regularly get a segfault in sawfish when I iconify a window. I copy here the message visible in console on last segfault (after I runned it with sawfish ): struct debug_buf common: Backtrace in `fatal_signal_handler': 0x7fffe750 Sprimitive_play_sample+0 malloc+304 (null)+257803248 gnome_sound_sample_load+104 gnome_sound_play+128 Fprimitive_play_sample+84 (null)+268096036 Lisp backtrace: #8 primitive-play-sample ... #7 play-sample ... #6 audio-event-handler ... #5 audio-state-change-fun ... #3 call-window-hook ... #2 iconify-window-1 ... #1 apply-command ... #0 call-command ... What can be done ? -- Jean-Christophe Michel [EMAIL PROTECTED]
why php4 version doesn't support sessions ?
Hello, Why is the debian package php4 the 4.1.2 version, which is reported to have persistent session errors ? How is it possible to upgrade ? Thanks
segfault in php4
Hello, I found a segfault in php4 module (apache or cgi) installed on a ppc Woody with last updates. It appears when calling php method 'get_defined_classes()' but there's no bug report for this on bugs.php.net and it makes no error on a Woody install on x386. Do you think it could be a problem with the package compilation for ppc ? Where has this bug to be posted ? Thx -- Jean-Christophe Michel [EMAIL PROTECTED]
share data with macos
Hi all, I need to put some data on my mac hfs partition on a dual boot pwbk. But i cannot mount partition in writable mode: mount -t hfs -w /dev/hda12 /mac mounts it in read only... Is it due to hfs ? -- Jean-Christophe Michel [EMAIL PROTECTED]
sound on pismo
Hi all, I cannot get sound working on my Pismo under Woody with a benh kernel. Here are the config vars concerning sound: CONFIG_SOUND=m CONFIG_DMASOUND_PMAC=m CONFIG_DMASOUND=m # CONFIG_SOUND_ALI5455 is not set # CONFIG_SOUND_BT878 is not set # CONFIG_SOUND_CMPCI is not set # CONFIG_SOUND_EMU10K1 is not set # CONFIG_SOUND_FUSION is not set # CONFIG_SOUND_CS4281 is not set # CONFIG_SOUND_ES1370 is not set # CONFIG_SOUND_ES1371 is not set # CONFIG_SOUND_ESSSOLO1 is not set # CONFIG_SOUND_MAESTRO is not set # CONFIG_SOUND_MAESTRO3 is not set # CONFIG_SOUND_FORTE is not set # CONFIG_SOUND_ICH is not set # CONFIG_SOUND_RME96XX is not set # CONFIG_SOUND_SONICVIBES is not set # CONFIG_SOUND_TRIDENT is not set # CONFIG_SOUND_MSNDCLAS is not set # CONFIG_SOUND_MSNDPIN is not set # CONFIG_SOUND_VIA82CXXX is not set # CONFIG_SOUND_OSS is not set # CONFIG_SOUND_TVMIXER is not set and the three modules are loaded under modconf. With xmms I get 'Could'nt open audio' and in Gnome's settings i hear nothing when I click on Play for sounds events. What should I check for ? -- Jean-Christophe Michel [EMAIL PROTECTED]
sound, mol, gnome on pismo
Hi all, I use my Pismo for web development since some months, with Debian 3.0 (benh kernel) and Gnome. But i encounter many problems i cannot solve myself: the sound never worked, mol doesn't mount my second hfs partition as writable (it's readonly :( If someone has a Pismo and benh kernel, could you send me a config I could compare to mine ? Less important: is it possible to hide Gnome's menu bar on top of screen ? Thanks for the help. Ah, last technical question: is there a difference between the way mol works and the way Apple's X.2 makes OS9 soft run ? Jean-Christophe Michel [EMAIL PROTECTED]
mol sees only system disk
Hello, mol on Debian woody/2.4.19benh/G3 sees only one of the two mac partitions I have : the disc that has system folder. The other is not mounted... What should I change to make it work ? -- Jean-Christophe Michel
mounting hfs+
Hello, I tried to mount two partitions; first one is hfs, without system, and mount -t hfs /dev/hda12 /mac -r works. Same thing on hda13 leads to a /mac containing only some files, and no directory... Is it because it holds a System dir ? or is it a hfs+ volume ? How do you proceed to exchange data between mac partitions and linux ones ? -- Jean-Christophe Michel [EMAIL PROTECTED]
help with benh_kernel and mol
Hello, I have a Pismo (Apple Powerbook firewire) under Woody for some months. I compiled benh kernel and found how to fix the diacriticals signs needed by French language. But I cannot succeed in getting mol working (nor having some sound...). I just tried do do a new rsync on benh sources and compile with make dep and then make clean bzImage and it stops on : idle_6xx.S:170: Error: missing operand make[1]: *** [idele_6xx.o] Error 1 (...one line skipped) make: *** [_dir_arch/ppc/kernel] Error 2 Can you give me some directions on how to correct this ? Is my .config file the reason why startmol -a concludes 'Fail to map RAM. Probably an of memory condition.' ? Thanks Jean-Christophe
mol problems
Hi all, I progress a little towards a maconlionux working... I get now a map_zero : mmap: cannot allocate memory when starting startmol but compliling and installing modules did'nt go to end: make-kpkg modules_image dpkg -i /usr/src/mol-modules-2.4.19-rc1-ben0Custom_powerpc.deb produces a line depmod: *** Unsresolved symbols in /lib/modules/2.4.19-rc1-ben0/kernel/drivers/sound/dmasound/dmasound_pmac.o I tried modconf but dmasound_pmac refuses to load with same line. What else can I do ? Thanks Jean-Christophe (Pismo, Debian woody) -- Jean-Christophe Michel [EMAIL PROTECTED] --==--==--==--==--==--==--==--==--==--==--==--==--==--==--==--==-- http://www.symetrie.commusic publisher 14 bis montee Saint-Sebastien F-69001 LYON +33 (0)478 29 52 14
Re: modem, mol, gnome session on Pismo/woody
Chris Tillman wrote: run apt-get build-dep mol-modules-source (and maybe apt-get install build-essential as well) Thanks, it was a good point. Compilation works well now, but dpkg -i ... ends with error message depmod: *** Unresolved symbols in /lib/modules...dmasound/dmasound_pmac.o What kind of error is this ? That 's a module you're asking to load, which it can't find. You can probably correct it with modconf. Thanks for your help. dmasound adds correctly, dmasound_pmac makes the same error line :-( in the .config for compiling the benh kernel, i have CONFIG_DMASOUND_PMAC=m CONFIG_DMASOUND=m Help again please... Jean-Christophe Michel
Re: modem, mol, gnome session on Pismo/woody
Siggi Langauf wrote: On Mon, 5 Aug 2002, Jean-Christophe Michel wrote: I get an error message compiling (with make-kpkg modules_images called from /usr/src/benh_kernel/ ): make[1]: dh_testdir: Command not found. All packages are updated... What can be the problem ? run apt-get build-dep mol-modules-source (and maybe apt-get install build-essential as well) Thanks, it was a good point. Compilation works well now, but dpkg -i ... ends with error message depmod: *** Unresolved symbols in /lib/modules...dmasound/dmasound_pmac.o What kind of error is this ? Jean-Christophe Michel [EMAIL PROTECTED] --==--==--==--==--==--==--==--==--==--==--==--==--==--==--==--==-- http://www.symetrie.commusic publisher 14 bis montee Saint-Sebastien F-69001 LYON +33 (0)478 29 52 14
Re: modem, mol, gnome session on Pismo/woody
nik gaffney wrote: Second point is the maconlinux that i would like to use to have some MacOS specific soft running. It always tell me that no modules are found. Maybe it's because i compiled the benh kernel ? (2.4.19-rc1-ben0) You need to install the package mol-sources and to compile it. you can also try startmol -a to see if it will work with the existing mol modules. if it still gives errors, then apt-get install mol-modules-source + compile. I get an error message compiling (with make-kpkg modules_images called from /usr/src/benh_kernel/ ): make[1]: dh_testdir: Command not found. All packages are updated... What can be the problem ? jean-christophe
Re: modem, mol, gnome session on Pismo/woody
[EMAIL PROTECTED] wrote: Jean-Christophe == Jean-Christophe Michel [EMAIL PROTECTED] writes: And last, is it possible to save open applications in gnome session to be opened automatically next time I load Linux ? Are you running gnome-session when you start up X? Take a look at Session properties and Startup Programs in the Gnome control Center to set things up. Automatic session save is activated, but neither Mozilla nor Nedit repoen. Only consoles... which is not the most useful :-) Is there an operation to do to have these softs handled by session ? jc
modem, mol, gnome session on Pismo/woody
Hi all, I work for some weeks on debian woody on Pismo (pwb G3), but there are still some things I didn't succeed to do. First internal modem always respond busy to pon; i tried to increase timeout and to change string, but none worked. Second point is the maconlinux that i would like to use to have some MacOS specific soft running. It always tell me that no modules are found. Maybe it's because i compiled the benh kernel ? (2.4.19-rc1-ben0) And last, is it possible to save open applications in gnome session to be opened automatically next time I load Linux ? Thanks for your help. -- Jean-Christophe Michel [EMAIL PROTECTED]
