pmud deamon problem
hi, pmud has been working on my ibook2 700mhz for over a mont now without any problems. since today the pmud deamon refuses starting with the following output: pmud[589]: pmud [threshold = 420, margin = 15] started pmud[589]: opening /dev/adb pmud[589]: opening /dev/pmu pmud[589]: bind socket pmud[589]: daemon stopped (bind socket) does anybody know what the reason for this is? thanks for any hints in advance reto -- __ Reto Wyss Phone : +41 1 635 30 72 Institute of Neuroinformatics Fax : +41 1 635 30 53 University/ETH Zuerich Mobile: +41 76 436 22 75 Winterthurerstr. 190, CH-8057 Zuerich, Switzerland __
Re: DRI CVS snapshot packages
Michel Dänzer wrote: On Tue, 2002-07-09 at 14:19, Reto Wyss wrote: Michel Dänzer wrote: On Mon, 2002-07-08 at 10:16, Reto Wyss wrote: i installed these packages and compiled the module. if i start X and have a look at glxinfo, everything looks fine. however, running glxgears results in locking up my ibook2 700 mhz 12 Combo with a radeon mobility LY. This is what I wrote about the M6 (=LY) in the announcement. Set RADEON_NO_TCL=1. setting the environment variable RADEON_NO_TCL=1 did not help. same behavior as before, the machine locks up, as soon as i run glxgears or any other opengl application. Strange, someone else reported success with this. The variable was set in the shell where you started the apps, wasn't it? yes, it was set. when i run glxgears it dumps the following two lines on the console, before it hangs itself: disabling TCL support radeonUpdatePageFlipping allow 0 current 0 does this maybe give a hint? the same two lines are given by glxinfo. reto -- __ Reto Wyss Phone : +41 1 635 30 72 Institute of Neuroinformatics Fax : +41 1 635 30 53 University/ETH Zuerich Mobile: +41 76 436 22 75 Winterthurerstr. 190, CH-8057 Zuerich, Switzerland __ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: DRI CVS snapshot packages
Michel Dänzer wrote: On Mon, 2002-07-08 at 10:16, Reto Wyss wrote: i installed these packages and compiled the module. if i start X and have a look at glxinfo, everything looks fine. however, running glxgears results in locking up my ibook2 700 mhz 12 Combo with a radeon mobility LY. This is what I wrote about the M6 (=LY) in the announcement. Set RADEON_NO_TCL=1. setting the environment variable RADEON_NO_TCL=1 did not help. same behavior as before, the machine locks up, as soon as i run glxgears or any other opengl application. otherwise, x runs fine and stable. any other ideas? reto -- __ Reto Wyss Phone : +41 1 635 30 72 Institute of Neuroinformatics Fax : +41 1 635 30 53 University/ETH Zuerich Mobile: +41 76 436 22 75 Winterthurerstr. 190, CH-8057 Zuerich, Switzerland __ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: DRI CVS snapshot packages
hi, i installed these packages and compiled the module. if i start X and have a look at glxinfo, everything looks fine. however, running glxgears results in locking up my ibook2 700 mhz 12 Combo with a radeon mobility LY. any idea why such a thing should happen? thanks for any help reto -- __ Reto Wyss Phone : +41 1 635 30 72 Institute of Neuroinformatics Fax : +41 1 635 30 53 University/ETH Zuerich Mobile: +41 76 436 22 75 Winterthurerstr. 190, CH-8057 Zuerich, Switzerland __ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
X freeze on new iBook
hi, recently i bought myself one of these new ibooks 700 12 Combo with an ATI Radeon Mobility LY (AGP) card. i installed debian on it, and everything went fine. it was a bit harder to get X working. it works now, but not accelerated. i'm using the kernel 2.4.19-rc1-ben0, and i downloaded, compiled and installed XFree86 4.2.0. now, the story is the following. when i start up X, everything goes fine, however when i look into the log, it says that AGP is not available and later on that direct rendering is disabled. this is confirmed by glxinfo. an lsmod reveals that the agpgart module was not loaded. so i load it by hand and try again. now X comes up again but ... the mouse cursor looks like a bar-code, and the background has a very strange, irregular greenish pattern. at this stage i can still tear it down, however if i start X using startx (running kde) X freezes. running top remotely yields that X is using 100% cpu. when i check the log this time everything seems fine, AGP was found, DRI enabled and so on. in both logs however, i saw a message saying (EE) RADEON(0): Cannot read V_BIOS (5) (WW) RADEON(0): Video BIOS not detected, using default PLL parameters! does this maybe tell me something? does anybody know why the agpgart module is not loaded automatically, and if loaded by hand, X freezes, or at least burns cpu like crazy while being unusable? thanks in advance reto the XFree86 log with agpgart preloaded: XFree86 Version 4.2.0 / X Window System (protocol Version 11, revision 0, vendor release 6600) Release Date: 18 January 2002 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/) Build Operating System: Linux 2.4.19-rc1-ben0 ppc [ELF] Module Loader present Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/XFree86.0.log, Time: Fri Jul 5 09:10:35 2002 (==) Using config file: /etc/X11/XF86Config-4 (==) ServerLayout Default Layout (**) |--Screen Default Screen (0) (**) | |--Monitor iBook LCD 12inch (**) | |--Device ATI Radeon Mobility (**) |--Input Device Generic Keyboard (**) Option XkbRules xfree86 (**) XKB: rules: xfree86 (**) Option XkbModel macintosh (**) XKB: model: macintosh (**) Option XkbLayout de_CH (**) XKB: layout: de_CH (**) Option XkbVariant nodeadkeys (**) XKB: variant: nodeadkeys (==) Keyboard: CustomKeycode disabled (**) |--Input Device Configured Mouse (**) FontPath set to unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/cyrillic,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi (==) RgbPath set to /usr/X11R6/lib/X11/rgb (==) ModulePath set to /usr/X11R6/lib/modules (--) using VT number 8 (WW) Open APM failed (/dev/apm_bios) (No such file or directory) (II) Module ABI versions: XFree86 ANSI C Emulation: 0.1 XFree86 Video Driver: 0.5 XFree86 XInput driver : 0.3 XFree86 Server Extension : 0.1 XFree86 Font Renderer : 0.3 (II) Loader running on linux (II) LoadModule: bitmap (II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a (II) Module bitmap: vendor=The XFree86 Project compiled for 4.2.0, module version = 1.0.0 Module class: XFree86 Font Renderer ABI class: XFree86 Font Renderer, version 0.3 (II) Loading font Bitmap (II) LoadModule: pcidata (II) Loading /usr/X11R6/lib/modules/libpcidata.a (II) Module pcidata: vendor=The XFree86 Project compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) PCI: PCI scan (all values are in hex) (II) PCI: 00:0b:0: chip 106b,0027 card , rev 00 class 06,00,00 hdr 00 (II) PCI: 00:10:0: chip 1002,4c59 card 1002,4c59 rev 00 class 03,00,00 hdr 00 (II) PCI: 01:0b:0: chip 106b,0028 card , rev 00 class 06,00,00 hdr 00 (II) PCI: 01:17:0: chip 106b,0025 card , rev 00 class ff,00,00 hdr 00 (II) PCI: 01:18:0: chip 106b,0026 card , rev 00 class 0c,03,10 hdr 00 (II) PCI: 01:19:0: chip 106b,0026 card , rev 00 class 0c,03,10 hdr 00 (II) PCI: 02:0b:0: chip 106b,0029 card , rev 00 class 06,00,00 hdr 00 (II) PCI: 02:0f:0: chip 106b,0024 card , rev 00 class 02,00,00 hdr 00 (II) PCI: End of PCI scan (II) LoadModule: scanpci (II) Loading /usr/X11R6/lib/modules/libscanpci.a (II) Module scanpci: vendor=The XFree86 Project compiled for 4.2.0, module version = 0.1.0 ABI class: XFree86 Video Driver, version 0.5 (II) UnloadModule: scanpci (II) Unloading /usr/X11R6/lib/modules/libscanpci.a (II) Host-to-PCI bridge: (II) Host-to-PCI bridge: (II) Host-to-PCI bridge: (II) Bus 0: bridge is at (0:11:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set) (II) Bus
Re: X freeze on new iBook
On Fri, 5 Jul 2002, Jesus Climent wrote: On Fri, Jul 05, 2002 at 09:48:37AM +0200, Reto Wyss wrote: hi, recently i bought myself one of these new ibooks 700 12 Combo with an ATI Radeon Mobility LY (AGP) card. i installed debian on it, and everything went fine. it was a bit harder to get X working. it works now, but not accelerated. i'm using the kernel 2.4.19-rc1-ben0, and i downloaded, compiled and installed XFree86 4.2.0. now, the story is the following. when i start up X, everything goes fine, however when i look into the log, it says that AGP is not available and later on that direct rendering is disabled. this is confirmed by glxinfo. an lsmod reveals that the agpgart module was not loaded. so i load it by hand and try again. now X comes up again but ... the mouse cursor looks like a bar-code, and the background has a very strange, irregular greenish pattern. at this stage i can still tear it down, however if i start X using startx (running kde) X freezes. running top remotely yields that X is using 100% cpu. when i check the log this time everything seems fine, AGP was found, DRI enabled and so on. In my case is even worse, now that you bring the issue to some light: boo:~# lsmod Module Size Used byNot tainted agpgart20100 0 (unused) and from the log: (EE) RADEON(0): [agp] AGP not available (WW) RADEON(0): [agp] AGP failed to initialize -- falling back to PCI mode. (WW) RADEON(0): [agp] Make sure you have the agpgart kernel module loaded. So I am missing something, here. Can you post your config file, so I can take a look at it? J here is the interesting part of my XFree86-4 config file: Section Device Identifier ATI Radeon Mobility Driver ati BusID PCI:0:16:0 Option AGPMode 1 Option UseFBDev true EndSection you see, nothing fancy ... reto -- __ Reto Wyss Phone : +41 1 635 30 72 Institute of Neuroinformatics Fax : +41 1 635 30 53 University/ETH Zuerich Mobile: +41 76 436 22 75 Winterthurerstr. 190, CH-8057 Zuerich, Switzerland __ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
