Re: Can't install Debian on Sunblade2000
В сообщении от 1 Апрель 2004 21:39 Ben Collins написал(a): http://www.phunnypharm.org/pub/for/sparc-folks/disks-sparc/current/sparc6 4/tftpboot.img This is what you want. Woody doesn't support UltraSPARC III/IIIi Nope that doesn't helped. I have tried several different methods - both cdrom and tftp boot but none worked. I have tried: 1) CDROM boot I have tried d-i image http://http.us.debian.org/debian/dists/testing/main/installer-sparc/current/images/cdrom-mini.iso Got: = Rebooting with command: boot cdrom Boot device: /[EMAIL PROTECTED],70/[EMAIL PROTECTED]/[EMAIL PROTECTED],0:f Dile and args: SILO Version 1.4.4 Fast Data Access MMU Miss ok == 2) tftp boot used images: http://http.us.debian.org/debian/dists/woody/main/disks-sparc/current/sun4u/tftpboot.img http://http.us.debian.org/debian/dists/testing/main/installer-sparc/current/images/sparc64/netboot/boot.img http://www.phunnypharm.org/pub/for/sparc-folks/disks-sparc/current/sparc64/tftpboot.img http://http.us.debian.org/debian/dists/stable/main/disks-sparc/current/sun4u/linux-a.out All results in approximately the same result BUT with some variations. The most strange is that variations belongs not to specific images but to some random cause - I mean I got different results on every next boot. So sometimes I got 1) Immediate error Rebooting with command: boot net:dhcp tftpboot.img Boot device: /[EMAIL PROTECTED],70/[EMAIL PROTECTED],1:dhcp File and args: tftpboot.img Timeout waiting for BOOTP/DHCP reply. Retrying ... 464c00 Memory Address not Aligned ok Fast Data AData access Error ok Fast Data Access MMU Miss ok 2) Some junk spreads over the top of screen and then hang with similar errors. You can see screenshot here: http://www.penza-gsm.ru/snake/debian/junk-and-mmu-miss.jpg In this case the computer hangs 3) Same as (2) but it not hangs but instead prints ever more jung on every kestroke. 4) (I have not seen this myself but it is the best result) === . Remapping kernel Booting Linux = and then it hanged. I have googled a lot and found many similar problems but no one solution. The most optimistic case was when someone got rid of it by simply recompiling the kernel with several parameters changed - so it will occassionally became aligned and booted up. I have not tryed it myself yet since I never did a cross-compile so it will take a lot of time and I will probably do it only next week. -- Respectfully Alexey Nezhdanov
Re: mount cdrom (newbie)
Marcelo Bruno wrote: Hi, memberlist Hi how does mount cdrom in Sparcstation 4, with solaris 5.5.1? why wouldn't you ask in a Solaris Mailing list ? dont you know here is a _Linux_ one ? :-) -- Rakotomandimby Mihamina Andrianifaharana Tel : +33 2 38 76 43 65 http://stko.dyndns.info/site_principal/Members/mihamina
Re: Can't install Debian on Sunblade2000
Remapping kernel Booting Linux = and then it hanged. I have googled a lot and found many similar problems but no one solution. The most optimistic case was when someone got rid of it by simply recompiling the kernel with several parameters changed - so it will occassionally became aligned and booted up. I have not tryed it myself yet since I never did a cross-compile so it will take a lot of time and I will probably do it only next week. Add -p to the end of your boot net command line. -- Debian - http://www.debian.org/ Linux 1394 - http://www.linux1394.org/ Subversion - http://subversion.tigris.org/ WatchGuard - http://www.watchguard.com/
Re: booting kernel ultra 10 - kernel hangs
thanks for Andrew answering. i used the console=ttyS1 cause im using serial boot, if i dont put that parameter, it gives me an inconsistent console output 2 input 0 or something like that, i dont remember exactly. if i use the monitor for output instead, it hangs just like below. i also have a diskless sun4m terminal, it's using debian without problem. anyway, if i have to upgrade the OBP, please tell what i should read, im really new on sparc. thanks. - um... the 333Mhz UltraSPARC requires at LEAST 3.19v4 OBP.. I don't know how your system is even booting. - Original Message - From: Andy Pazos [EMAIL PROTECTED] To: debian-sparc@lists.debian.org Sent: Friday, April 02, 2004 12:38 AM Subject: booting ultra 10 - kernel hangs i've tried CDROM, netboot (linux-a.out, tftpboot.img), just the same happens. Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 333MHz), Keyboard Present OpenBoot 3.15, 128 MB memory installed, Serial #10913651. Ethernet address 8:0:20:a6:87:73, Host ID: 80a68773. ok boot cdrom Boot device: /[EMAIL PROTECTED],0/[EMAIL PROTECTED],1/[EMAIL PROTECTED]/[EMAIL PROTECTED],0:f File and args: Welcome to Debian GNU/Linux 3.0! This is the Debian Install CD. Keep it once you have installed your system, as you can boot from it to repair the system on your hard disk if that ever becomes necessary. WARNING: You should completely back up all of your hard disks before proceeding. The installation procedure can completely and irreversibly erase them! If you haven't made backups yet, remove the rescue CD from the drive and press L1-A to get back to the OpenBoot prompt. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. [ ENTER - Boot install ] [ Type rescue - Boot into rescue mode ] boot: linux console=ttyS1 Loading initial ramdisk Remapping the kernel... done. Booting Linux... (it hangs here) thanks in advance. __ Do you Yahoo!? Yahoo! Small Business $15K Web Design Giveaway http://promotions.yahoo.com/design_giveaway/
Re: kernal-source package for sparc?
It's 719.25 Bogo I think it's a 350, I have 256M of 50ns memory. I have it in a Ultra10 case and I'm trying to get raid1 working. I have built 3 kernels from the debian config, this includeds alot of drivers that will never be used, it takes more time than TheTwoTowers. --- andrew burd [EMAIL PROTECTED] wrote: btw what speed is that processor? I have an Ultra 5 w/ 333Mhz 2M cache and it compiles in about 15 minutes - Original Message - From: Mike Mestnik [EMAIL PROTECTED] To: andrew burd [EMAIL PROTECTED] Cc: lists.debian.org debian-sparc debian-sparc@lists.debian.org Sent: Thursday, April 01, 2004 12:38 PM Subject: Re: kernal-source package for sparc? Hehe, about 4 hrs for a stock(Debian) kernel build. If I cut it down it's still like 2.5 hrs. X takes just as long. VS 15 to 7 minuets on a K7. --- andrew burd [EMAIL PROTECTED] wrote: like you're gonna have to wait long on that machine.. sheesh - Original Message - From: Mike Mestnik [EMAIL PROTECTED] To: andrew burd [EMAIL PROTECTED] Sent: Thursday, April 01, 2004 1:43 AM Subject: Re: kernal-source package for sparc? I used to do this untill I started using cramfs for initrds. I guess this is disabled in sparc so it is a good alt. However I don't like waiting for kernels to build, I don't mind for X as much. --- andrew burd [EMAIL PROTECTED] wrote: ftp ftp.kernel.org cd pub/linux/kernel/v2.4 get linux-2.4.25.tar.gz unpack this, make menuconfig.. configure the kernel, and build with make-kpkg kernel_image - Original Message - From: Mike Mestnik [EMAIL PROTECTED] To: [EMAIL PROTECTED] Cc: lists.debian.org debian-sparc debian-sparc@lists.debian.org Sent: Thursday, April 01, 2004 12:45 AM Subject: Re: kernal-source package for sparc? 1. This pkg dose not exist, did you mean kernel-image-2.4-sparc? 2. This pkg dose not contain the kernel-source or a buildable kernel tree. 3. There is also no kernel-source-sparc-2.4 or kernel-source-2.4-sparc even. --- Christian Guggenberger [EMAIL PROTECTED] wrote: On Thu, 2004-04-01 at 04:17, Mike Mestnik wrote: I was told by Herbert Xu [EMAIL PROTECTED], the maintainer of kernel-source-2.4.24, that his package was not the for use with sparcs. I looked all over and could not find another pkg. Dose any one know how to file bugs like #241263 with ought them being closed cause thay are against the wrong pkg? the sparc src-package is called kernel-image-sparc-2.4 cheers. Christian __ Do you Yahoo!? Yahoo! Small Business $15K Web Design Giveaway http://promotions.yahoo.com/design_giveaway/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] __ Do you Yahoo!? Yahoo! Small Business $15K Web Design Giveaway http://promotions.yahoo.com/design_giveaway/ __ Do you Yahoo!? Yahoo! Small Business $15K Web Design Giveaway http://promotions.yahoo.com/design_giveaway/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] __ Do you Yahoo!? Yahoo! Small Business $15K Web Design Giveaway http://promotions.yahoo.com/design_giveaway/