Re: nfs problem
Hi, mounting nfs with 2.2.19 has a known bug. regards Thanks. Do older versions work better? Heinrich Personally I would rather up- the downgrade..., bye -- Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen, Germany [EMAIL PROTECTED] | [EMAIL PROTECTED] | [EMAIL PROTECTED] Studenten, Absolventen und Young Professionalshttp://www.c-cn.de
Re: nfs problem
Hi, mounting nfs with 2.2.19 has a known bug. regards On Mon, 2002-03-04 at 17:52, Heinrich Rebehn wrote: Hi, when i try to mount a filesystem from an NFS server, the mount hangs for several minutes and syslog prints the following errors: kernel: lockd_up: no pid, 2 users?? kernel: portmap: RPC call returned error 5 Eventually the mount succeeds and i can access the data. Is this a known problem? (I could not find any recent posts about this). I use kernel 2.2.19 (woody installation kernel) on a SS 20. I makes no difference if the NFS server is Linux or FreeBSD, so it seems to be a client problem. Any ideas? -- Heinrich Rebehn University of Bremen Physics / Electrical and Electronics Engineering - Department of Telecommunications - E-mail: mailto:[EMAIL PROTECTED] Phone : +49/421/218-4664 Fax :-3341 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen, Germany [EMAIL PROTECTED] | [EMAIL PROTECTED] | [EMAIL PROTECTED] Studenten, Absolventen und Young Professionalshttp://www.c-cn.de
Re: Creator3D XF86Config-4
I have a similar problem on my Ultra10 with Creator 3D. Any movie shows with some kind of noise, like some colors get inverted. Looks really funny, though... Well just noticed that this is history now. After updating XFree86 (4.1.0.1) the noise is gone. I used to watch the movies on the on-board ati graphic card but now they work on the Creator 3D, too. SDL things still have noise. How do you get this transparent menues? And why is your klipper so damn cool? Anything special? regards snapshot On Sam, 2002-11-09 at 03:04, Daniel 'Doc' Sewell wrote: Okay, so does this sound familiar to anyone else? Here's a snapshot of the crummy video: http://folk.federated.com/~dochood/doom_snap1.png And here are a couple snapshots of my emaculate desktop! http://folk.federated.com/~dochood/debian_sparc1.png http://folk.federated.com/~dochood/debian_sparc2.png As you can see, my desktop looks just hunky-dory, yet lxdoom, as well as other games, come out really crummy. Some 3D programs seem to look okay, as far as I can remember. I'd appreciate it if the tip below rings a bell with someone, and they know how to fix this. Doc Sewell On Friday 08 November 2002 06:23 pm, you wrote: On Thu, Nov 07, 2002 at 10:22:54PM -0600, Daniel 'Doc' Sewell wrote: This one works for me at 1280x1024x24bit color. I had to jump through hoops to get it to work, but it works okay now. I've tried to run some things like LXDOOM and PENGUINCOMMAND, but they don't work very well. I get these washed out colors. No one has been able to help me fix it yet. The desktop looks pretty nice, though. I have transparent menus and kicker in KDE working, and it looks really cool. The washed out colors are almost certainly due to the code picking a visual with an unexpected gamma correction value. When the data goes into the RAMDAC, it can go through either an uncorrected path, or one that adjusts for the (presumed) properties of the monitor. Most people prefer a bigger gamma correction value... There should be a way to set it, but unfortunately I don't know how to do that. Jon Leonard -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen, Germany [EMAIL PROTECTED] | [EMAIL PROTECTED] |
Re: Stability of Ultra-10 (440Mhz Ultrasparc-IIi, 256M of ram, 9G disk)
On Don, 2002-11-07 at 18:33, Scott Walker wrote: How is the stability of Linux/debian on a the U10 described above. Can it be considered production quality. Any caveats on installing/running debian|linux on a Ultra sparc? This machine is running with debian/linux testing for a year now on our university for our database course with PostgreSQL. I had one severe crash till now (libc dissapeared somehow). hope this helps regards -- Scott Walker URL: http://www.unspeakable.org -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen, Germany [EMAIL PROTECTED] | [EMAIL PROTECTED] |
Re: Sound on KDE on Ultra 10 w/ CS4321
just shut down the artsd, and play sound throught oss. it works for me on my ultra10 with cs4321. but xmms locks my whole system from time to time. On Thu, 2002-10-24 at 06:03, Daniel 'Doc' Sewell wrote: Hello, all Has anyone successfully gotten sound to work under KDE on Woody on an Ultra 10 with a cs4321 sound card? I can't get it to work. XMMS locks up when I try and play something, and I get no sounds from KDE's system events. I have gotten sound to work under WindowMaker. I can use XMMS just fine there. Thanks in advance, Doc Sewell -- Daniel 'Doc' Sewell debian-sparc at thezealot dot net -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen, Germany [EMAIL PROTECTED] | [EMAIL PROTECTED] |
Re: Sound on KDE on Ultra 10 w/ CS4321
I don't have any real understanding with the sound, too. oss ran just 'out of the box'. i choose oss plugin in xmms, and it worked... On Thu, 2002-10-24 at 14:03, Daniel 'Doc' Sewell wrote: Yeah, actually, I noticed that XMMS also locked up GNOME when I ran it with the ESD daemon on. I don't really understand the whole sound thing too well. Is there a quick way to turn on OSS? Do I have to recompile a kernel, or are there simply packages to apt-get? Doc On Thursday 24 October 2002 06:13 am, Hakan Kuecuekyilmaz wrote: just shut down the artsd, and play sound throught oss. it works for me on my ultra10 with cs4321. but xmms locks my whole system from time to time. On Thu, 2002-10-24 at 06:03, Daniel 'Doc' Sewell wrote: Hello, all Has anyone successfully gotten sound to work under KDE on Woody on an Ultra 10 with a cs4321 sound card? I can't get it to work. XMMS locks up when I try and play something, and I get no sounds from KDE's system events. I have gotten sound to work under WindowMaker. I can use XMMS just fine there. Thanks in advance, Doc Sewell -- Daniel 'Doc' Sewell debian-sparc at thezealot dot net -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen, Germany [EMAIL PROTECTED] | [EMAIL PROTECTED] |
Re: phpgroupware/session...
Zitiere Marco Gaiarin [EMAIL PROTECTED]: Mandi! Hakan Kuecuekyilmaz In chel di` si favelave... Warning: open(0/sess_48c856da9636269551b762bd8352a3ea, O_RDWR) failed: No such file or directory (2) in /usr/share/phpgroupware/phpgwapi/inc/class.sessions_php4.inc.php on line 124 seems like the php-session bug on sparc machines... Ok, how can i do to solve this?! hmm, I never get it solved on my machine. the best idea would be to file a bug report on bugs.php.net. regards -- Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen Germany [EMAIL PROTECTED] - This mail sent through IMP: webmail.fht-esslingen.de
Re: phpgroupware/session...
Zitiere Marco Gaiarin [EMAIL PROTECTED]: I've installed apache, php4, phpgroupware in a sparc station 20, with fresh woody install. Auth doesn't work, they say me: Warning: open(0/sess_48c856da9636269551b762bd8352a3ea, O_RDWR) failed: No such file or directory (2) in /usr/share/phpgroupware/phpgwapi/inc/class.sessions_php4.inc.php on line 124 seems like the php-session bug on sparc machines... regards -- Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen Germany [EMAIL PROTECTED] - This mail sent through IMP: webmail.fht-esslingen.de
Re: build kernel 2.4.19
try this one from Ben: snip If you are using Debian, I strongly suggest using the kernel-package package. It simplifies building, installing and managing your kernel images. You would just do something like this: cd /usr/src/linux make menuconfig (again, whatever you prefer) make-kpkg kernel-image cd .. dpkg -i kernel-image-x.x.x_sparc.deb Much simpler. Then you can install multiple versions, and use any of them by having them in /etc/silo.conf or just change the symlink (or just use the silo command line). You can also easily remove them, just like any other package. It also saves the configuration of that kernel as /boot/config-x.x.x. Ben snap Zitiere Andrea Dettori [EMAIL PROTECTED]: Hi all, I'm new user Debian-sparc I have installed a Debian woody into SUN Netra X1. I want build a new kernel, but I recive this error and I don't understand why. scilla:/usr/src/linux-2.4.19# make bzImge make: *** No rule to make target `bzImge'. Stop. Where is 'bzImage'? is different build kernel into sparc? thanks and sorry for my bad english! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen Germany [EMAIL PROTECTED] - This mail sent through IMP: webmail.fht-esslingen.de
Re: Compile libssl or make ssh not slow
Zitiere Bert Lindner [EMAIL PROTECTED]: Hi Robert, On Tue, 10 Sep 2002, Robert Ian Smit wrote: What is the easy solution to make ssh a bit faster on sun4m? Use the -C when opening an ssh session. ssh -C -l user host. The -C option deals with compression if I am not mistaken. Perhaps I wasn't clear in my original message, but once the session is established I have no problem at all. It's the process of logging in that takes 10 seconds or so. This is probably a DNS resolve-issue: sshd cannot find a hostname for the IP address you connect from. The resolving process slows your inititial connection. Try adding the IP-address and some (bogus) hostname for the machine you connect /from/ (client) to /etc/hosts on the machine you connect /to/ (server). Or have reverse DNS fixed. This could be a reason, too. But it is true that that connecting to/from a sparc machine tooks very long with ssh. To get it faster it is possible to recompile some packages with v8 or v9 flags. The exact details are somewhere on this list. I tried it and had improvements about 5x - 10x faster. Bye I thought it was also possible to disable reverse name lookups for sshd but can't find it quickly in the man pages. Regards, -Bert -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen Germany [EMAIL PROTECTED] - This mail sent through IMP: webmail.fht-esslingen.de
audio issue
Hello, I am running an Ultra10 debian/unstable with custom 2.4.19 kernel. Now I am trying to record some audio on my box, playing audio is no problem. Since I have no handbook of my Ultra10 I do not know exactly which socket is for what. I guess the sockets are: (view from the back) [] [] for recording? [] [] for playback, which works.. I installed some audio programs, when I try to record sound from line in some programs are crashing, some hanging and other do not record anything. Does anybody knows which socket is for what? Is it possible to record audio with Ultra10? PS: Does anybody run mplayer on an Ultra10 (I have a big problem with sound on mplayer, too..) regards -- Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen, Germany [EMAIL PROTECTED] | [EMAIL PROTECTED] |
Re: Xserver issues on SS20
On Thu, 2002-07-11 at 01:04, Gomer wrote: I get some weird dependency issue when I upgrade from potato to woody on my SS20. There are issues with the version of xserver-xsun and some other packages. I was wondering if anyone knew who wrote that xserver. I was hoping to go and grab the source, so I could just compile it myself, to sort of force things to work under woody ... Any help you can offer me is greatly appreciated. --Gomer Did you try xserver-xfree86, it works on my ultra10 (dont know if it is compareable). bye -- Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen, Germany [EMAIL PROTECTED] | [EMAIL PROTECTED] | [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PHP4 problems
Hi,
after setting the parameters like Matt said, session works on
sparc again, but apache keeps crashing all the time. so
this is not a real workaraound.
regards
On Sun, 2002-06-23 at 17:52, matt toups wrote:
this sounds like a problem I had with php4 on sparc.
(README.debian does not the problems with php4 sessions
on big endian systems)
I believe this worked around it for me:
in php.ini, change session.save_handler to:
session.save_handler = mm
and then from the shell do:
echo 33554432 /proc/sys/kernel/shmmax
(from README.debian) to increase the limit
on shared memory.
good luck,
matt
[EMAIL PROTECTED]
On Wed, Jun 19, 2002 at 04:55:06PM +0200, Fredrik Ax wrote:
Configuration:
--
Architecture: sparc (sun4m)
Debian GNU Linux 3.0 (woody)
Kernel: 2.4.18
Apache: 1.3.24 (apache 1.3.24-3)
PHP: 4.1.2 (php4 4.1.2-4)
Problem:
Session handling in PHP doesnt seem to work (with cookies at least).
More specifically, session_register - session_is_registered doesn't
work for global variables even with register_globals = on in the
php.ini.
The set.php - get.php scripts below works just fine om my Debian
GNU/Linux 3.0, kernel 2.4.18 on i386, but doesnt work on my Debian
GNU/Linux 3.0, kernel 2.4.18 on sparc.
Both machines runs Apache 1.3.24 and PHP 4.1.2 and got identical php.ini
files.
The scripts:
--- set.php -
?php
@session_destroy();
$cookie_params = session_get_cookie_params();
setcookie(session_name());
session_start();
$globvar= true;
session_register ('globvar');
print 'A HREF=get.phpget.php/A';
?
--- get.php -
?php
session_start();
if(session_is_registered('globvar')) {
print 'ok';
} else {
print 'failed';
}
?
-
On the i386 i get 'ok' but on the sparc 'failed' ... :-(
This makes it impossible to use for instance SquirrelMail
... :-(
Anybody had the same problem or got any suggestion?
brgds,
/frax
--
Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen, Germany
[EMAIL PROTECTED] | [EMAIL PROTECTED] | [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: PHP4 problems
Hi,
thanks, this worked for me :-)
bye
On Sun, 2002-06-23 at 17:52, matt toups wrote:
this sounds like a problem I had with php4 on sparc.
(README.debian does not the problems with php4 sessions
on big endian systems)
I believe this worked around it for me:
in php.ini, change session.save_handler to:
session.save_handler = mm
and then from the shell do:
echo 33554432 /proc/sys/kernel/shmmax
(from README.debian) to increase the limit
on shared memory.
good luck,
matt
[EMAIL PROTECTED]
On Wed, Jun 19, 2002 at 04:55:06PM +0200, Fredrik Ax wrote:
Configuration:
--
Architecture: sparc (sun4m)
Debian GNU Linux 3.0 (woody)
Kernel: 2.4.18
Apache: 1.3.24 (apache 1.3.24-3)
PHP: 4.1.2 (php4 4.1.2-4)
Problem:
Session handling in PHP doesnt seem to work (with cookies at least).
More specifically, session_register - session_is_registered doesn't
work for global variables even with register_globals = on in the
php.ini.
The set.php - get.php scripts below works just fine om my Debian
GNU/Linux 3.0, kernel 2.4.18 on i386, but doesnt work on my Debian
GNU/Linux 3.0, kernel 2.4.18 on sparc.
Both machines runs Apache 1.3.24 and PHP 4.1.2 and got identical php.ini
files.
The scripts:
--- set.php -
?php
@session_destroy();
$cookie_params = session_get_cookie_params();
setcookie(session_name());
session_start();
$globvar= true;
session_register ('globvar');
print 'A HREF=get.phpget.php/A';
?
--- get.php -
?php
session_start();
if(session_is_registered('globvar')) {
print 'ok';
} else {
print 'failed';
}
?
-
On the i386 i get 'ok' but on the sparc 'failed' ... :-(
This makes it impossible to use for instance SquirrelMail
... :-(
Anybody had the same problem or got any suggestion?
brgds,
/frax
--
Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen, Germany
[EMAIL PROTECTED] | [EMAIL PROTECTED] | [EMAIL PROTECTED]
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Sun Ultra 10
Hi, you can also have a look on my XF86config-4 for my Ultra10. it has an onboard ati and a creator 3D cart. http://bwpc050.fht-esslingen.de:8080/~hakubw00/XF86Config-4 bye On Fri, 2002-05-31 at 17:04, Ben Collins wrote: On Fri, May 31, 2002 at 09:40:51AM -0400, Nick Mitchell wrote: I am trying to setup XFree86 4.1.1 on a Sun Ultra 10, but I cannot figure out which video card it has. Does anyone know where I can look to find out which video cards it may have. It has an on board card there cannot be that many different choices right? Use the ati driver (it's a Mach64 chipset). -- Debian - http://www.debian.org/ Linux 1394 - http://linux1394.sourceforge.net/ Subversion - http://subversion.tigris.org/ Deqo - http://www.deqo.com/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen, Germany [EMAIL PROTECTED] | [EMAIL PROTECTED] | [EMAIL PROTECTED] Studenten, Absolventen und Young Professionalshttp://www.c-cn.de -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
update problem
Hi, how this can be solved? trying to install gnome-terminal: bwpc050:~# apt-get install gnome-terminal Reading Package Lists... Done Building Dependency Tree... Done Sorry, gnome-terminal is already the newest version. 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 1 packages not fully installed or removed. Need to get 0B of archives. After unpacking 0B will be used. Setting up gnome-terminal (1.4.0.8-2) ... dpkg: error processing gnome-terminal (--configure): subprocess post-installation script returned error exit status 1 Errors were encountered while processing: gnome-terminal E: Sub-process /usr/bin/dpkg returned an error code (1) --- trying to remove gnome-terminal: bwpc050:~# apt-get remove gnome-terminal Reading Package Lists... Done Building Dependency Tree... Done The following packages will be REMOVED: gnome-terminal 0 packages upgraded, 0 newly installed, 1 to remove and 0 not upgraded. 1 packages not fully installed or removed. Need to get 0B of archives. After unpacking 1110kB will be freed. Do you want to continue? [Y/n] (Reading database ... 131667 files and directories currently installed.) Removing gnome-terminal ... Document `gnome-terminal' is not installed, cannot remove. dpkg: error processing gnome-terminal (--remove): subprocess post-removal script returned error exit status 1 Errors were encountered while processing: gnome-terminal E: Sub-process /usr/bin/dpkg returned an error code (1) is there something that I am missing? what can I do now to get gnome-terminal running again? The same is happening with gnome-session, so that I cannot run gnome at all... :-( regards -- Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen, Germany [EMAIL PROTECTED] | [EMAIL PROTECTED] | [EMAIL PROTECTED] Studenten, Absolventen und Young Professionalshttp://www.c-cn.de -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: sun partitions
On Thu, 2002-02-28 at 00:19, Brian Connelly wrote: I just ran across your posts on debian-sparc about the File size limit exceeded problem. I'm having the same problem. Did you ever get this solved? I didn't see any resolution on the list. ok sorry, the File size limit exceeded was solved this morning when I updated my machine (sid). The program in question is e2fsprogs 1.26-3. That means e2fsprogs 1.26-3 will cause the mentioned problems. regards and thanks to the e2fsprogs team and ben! -- Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen, Germany [EMAIL PROTECTED] | [EMAIL PROTECTED] | [EMAIL PROTECTED] Studenten, Absolventen und Young Professionalshttp://www.c-cn.de
Re: e2fsck: File size limit exceeded
I've just run into the same problem that Hakan had a week ago. Yippie, I am not alone ;-) I still have this problem with the filesize. Nobody really seems to really know how or why it happens :-( Please inform me if you happen to solve it! regards -- Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen Germany [EMAIL PROTECTED] | [EMAIL PROTECTED] | [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de - This mail sent through IMP: webmail.fht-esslingen.de
Re: nfs problem w/debian potato
the kernel, which potato is using has a known nfs mount kernel bug. regards On Tue, 2002-02-19 at 18:26, Jim Crumley wrote: On Tue, Feb 19, 2002 at 08:48:54AM -0800, John Mastrolia wrote: Basically, I'm trying to mount a nfs partition exported from a Solaris 2.7 box (using both v2 and v3 nfs) and get a panic error that freezes the local workstation. Could someone point me to the document that points out the errors of my ways? mount -t nfs -o tcp,defaults,bg,soft hostname:/var/mail /var/mail or in /etc/fstab hostname:/var/mail /var/mail nfs defaults,tcp,bg,soft 0 0 Well, I mount NFS partitions under woody from Solaris, so I'll mention a couple of things that you might want to try. First, are you sure that you have the proper nfs packages installed? Check by typing dpkg -l nfs-client . Next, try mounting the partition with fewer options. For a first try, just use the defaults. If that works, add back in your options one by one and see what happens. -- Jim Crumley | [EMAIL PROTECTED] | Work: 612 624-6804 or -0378 | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- Hakan Kuecuekyilmaz, University of Applied Sciences Esslingen, Germany [EMAIL PROTECTED] | [EMAIL PROTECTED] | [EMAIL PROTECTED] Studenten, Absolventen und Young Professionalshttp://www.c-cn.de
Harddisc formating
Hello, yesterday I tried to repartition and format my 40GB Harddisc but for partitions 2GB it says: 'File size limit exceeded' I tried with a Sun Disklabel, with Dos Label, logged in via ssh, made su - logged in as root, tried ext2 and ext3, - still same error. I have a UltraSparc10 with debian/sid 2.4.17 running. Is this a kernel related 'feature', because the disc was running with a 40GB partition on ext3 before yesterday. Any hints are welcome regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de - This mail sent through IMP: webmail.fht-esslingen.de
Re: Harddisc formating
Exactly how are you trying to do this? What program are you using? Hi Ben, following things: logged in via gdm as user into gnome opend a gnome-terminal typed 'su -' then 'fdisk /dev/hdb' typed 'o' (kernel does handle it) maked some partitions: Try logging in as root on the terminal. I bet you are getting bitten by some sort of ulimit. Either that or in gnome-terminal: exec /bin/login hi, did control+alt F1 to get to a terminal (tty1) logged in as root same error message, when i say 'ulimit -c unlimited' and make a mke2fs -j /dev/hdb1 it says File size limit exceeded (core dump) hmm? regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de
Re: Harddisc formating
There's has to be something odd here. There's no way this can happen under normal circumstances. What version of e2fsprogs do you have installed (dpkg -l e2fsprogs)? it says: ii e2fsprogs 1.26-1 The EXT2 file system utilities and libraries -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de
Re: Harddiscs are growing
Quoting Michael Blickenstorfer [EMAIL PROTECTED]: Hi all I would like to install a 80GB harddisk on an UltraSparc10. But reading the Sun's page of this system, I may only install 2 times 20GB... Is this just an old page? Or won't it be possible at any time? Hi Michael, I installed a 40GB harddisk on my UltraSparc10 and had no problems besides of formating the harddisk. But now it runs happily with ext3. regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de - This mail sent through IMP: webmail.fht-esslingen.de
MO-drive
Hi, my MO-drive is working now for a while. If I mount the drive, it seems that is spinning the disk all the time. How can I check wheter it is spinning all the time and how can I make it not to spin all the time. It should be mounted, because I use it as a backup directory in our Network regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de
Re: scsi pci card on ultra10
Well, you loaded SCSI, but it doesn't appear that you loaded the driver for the SCSI card. Did you build the Adaptect 2940 module at all? Hello, after checking the scsi and adaptec drivers I get following at boot: SCSI subsystem driver Revision: 1.00 scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.4 Adaptec 2940 SCSI adapter aic7870: Single Channel A, SCSI Id=7, 16/253 SCBs Vendor: FUJITSU Model: M2513ARev: 1000 Type: Direct-Access ANSI SCSI revision: 01 (scsi0:A:5): 5.000MB/s transfers (5.000MHz, offset 10) Attached scsi removable disk sda at scsi0, channel 0, id 5, lun 0 SCSI device sda: 310352 2048-byte hdwr sectors (636 MB) sda: Write Protect is off sda: sda1 sda2 sda3 But 'mount -t ext2 /dev/sda1 /mnt/test' says: mount -t ext2 /dev/sda1 /mnt/test mount: wrong fs type, bad option, bad superblock on /dev/sda1, or too many mounted file systems I made a 'fdisk' and created a sun disklabel with 's' but the parameter rotating speed [5400] confused me a bit. How can I make a dos or vfat disklabel on it again, because the machine can read dos formatted floppies. Any further hints? thanks alot and regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de - This mail sent through IMP: webmail.fht-esslingen.de
Re: scsi pci card on ultra10
Quoting Ben Collins [EMAIL PROTECTED]: On Tue, Jan 15, 2002 at 03:23:32PM +0100, Hakan Kuecuekyilmaz wrote: I made a 'fdisk' and created a sun disklabel with 's' but the parameter rotating speed [5400] confused me a bit. How can I make a dos or vfat disklabel on it again, because the machine can read dos formatted floppies. You have to make a partition. Why do you want to make a dos or vfat partition on a Sun disk? I'm hoping you mean just a normal partition, which you would do: mke2fs /dev/sda1 I made mk2fs -J size=8 /dev/sda1 on a dos disklabel, now everything is fine. thanks Ben -- .--===-=-==-=---==-=-. / Ben Collins--Debian GNU/Linux \ ` [EMAIL PROTECTED] -- [EMAIL PROTECTED] -- [EMAIL PROTECTED] ' `---=--===-=-=-=-===-==---=--=---' -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de - This mail sent through IMP: webmail.fht-esslingen.de
scsi pci card on ultra10
Hello, I attached a Adaptec 2940 and a Fujitsu M2513A into my Ultra10. Then configured the kernel to support scsi, after a 'mount /dev/sda /test' I get 'mount: /dev/sda is not a valid block device'. 'lsmod' says: sd_mod 12488 0 (autoclean) (unused) scsi_mod 100640 1 (autoclean) [sd_mod] How can I get this Fujitsu working? Maybe I am missing something important? The 2940 is the first pci card which I put into the Ultra10, do I have to set jumpers for the card? regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de
euro sign
Hello, for days I am trying to get the euro sign and umlauts on my ultra10 with type6 keyboard to work. Now I have german man pages but no euro sign.(I want the euro sign no german language...) May anybody can help? -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de
Re: Cursor freezes
On Sat, 2002-01-05 at 12:16, Chris Elston wrote: I just installed woody on my Sparc 5 then xfree86 4.1, everything is fine, except that the cursor freezes randomly, and then moves again a few seconds later. It spends more time frozen than actually responding to the movement of the mouse though, so it's practically unusable. Any ideas? do you have gpm installed? regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de
openoffice
Hi, has anyone succesfully compiled openoffice on sparc(64)/linux? Is there a howto? regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de - This mail sent through IMP: webmail.fht-esslingen.de
Re: Kernel 2.4.16
Quoting Tille, Andreas [EMAIL PROTECTED]: Hello, I just wanted to give the recent kernel a try after beeing bothered now to much by the broken NFS and NCPFS of my current 2.4.9. So I installed kernel-source-2.4.16 package from Woody and builded the usual way. But ... sparc64-linux-gcc -D__KERNEL__ -I/usr/src/kernel-source-2.4.16/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -m64 -pipe -mno-fpu -mcpu=ultrasparc -mcmodel=medlow -ffixed-g4 -fcall-used-g5 -fcall-used-g7 -Wno-sign-compare -Wa,--undeclared-regs-c -o ioctl32.o ioctl32.c ioctl32.c: In function `do_lvm_ioctl': ioctl32.c:2636: warning: assignment makes pointer from integer without a cast ioctl32.c:2670: structure has no member named `inode' ioctl32.c:2711: warning: assignment from incompatible pointer type ioctl32.c:2712: structure has no member named `inode' ioctl32.c:2719: structure has no member named `inode' ioctl32.c:2732: structure has no member named `inode' ioctl32.c:2611: warning: `v' might be used uninitialized in this function make[2]: *** [ioctl32.o] Error 1 make[2]: Leaving directory `/usr/src/kernel-source-2.4.16/arch/sparc64/kernel' make[1]: *** [_dir_arch/sparc64/kernel] Error 2 make[1]: Leaving directory `/usr/src/kernel-source-2.4.16' make: *** [stamp-build] Error 2 Any clue? Kind regards Andreas. hmm, try it without LVM support. Seems that it still does not work for sparc My custom 2.4.16-pre1 did not compile with LVM support either. regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de - This mail sent through IMP: webmail.fht-esslingen.de
Re: Dual Monitor on Ultra10
Jonathan D. Proulx wrote: That's what I usually do for intel or sparc multihead setups. The trickiest thing I've found is getting windowmanagers that play well. It's been a while since I tried different ones (if it ain't broke...), I found sawfiss/sawmill plays well when told which display to manage. .xinitrc example: --- sawfish --display :0.0 exec sawfish --display :0.1 --- with this example if you want to end the Xsession you'll need to quit from :0.1, you can (un)happily quit the windowmanager on :0.0 and X will keep going. HTH, -Jon well, but I have no striples on the second monitor, and I really don't more what I changed in the X86Config-4. The only thing is that it worked for 10 minutes, till I tried Xinarama mode. The error logs and the Config File is viewable under http://134.108.33.50:8080/~hakubw00/XF86Config-4 http://134.108.33.50:8080/~hakubw00/xlog1 http://134.108.33.50:8080/~hakubw00/xlog2 sorry, the striples are back now, now I will try your .xinitrc thing! thanks -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de
Dual Monitor on Ultra10
Hello, I am so sad... five minutes ago I had a second Monitor running, on the first was gnome on the second only the X stripples. So I played a bit with the XF86Config-4 File to get the second Monitor running propper, too. Now the second Monitor is not running, and I have no idea why? Gnome still runs on the first Monitor and I have found no err messages. The conf file and err logs can be viewed at: http://134.108.33.50:8080/~hakubw00/xlog1 http://134.108.33.50:8080/~hakubw00/xlog2 http://134.108.33.50:8080/~hakubw00/XF86Config-4 any hints? regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de
Re: Dual Monitor on Ultra10
Chad Miller wrote: On Wed, Nov 21, 2001 at 08:21:21PM +0100, Hakan Kuecuekyilmaz wrote: Now the second Monitor is not running, and I have no idea why? Gnome still runs on the first Monitor and I have found no err messages. The conf file and err logs can be viewed at: http://134.108.33.50:8080/~hakubw00/xlog1 http://134.108.33.50:8080/~hakubw00/xlog2 http://134.108.33.50:8080/~hakubw00/XF86Config-4 First, uncomment that 'Option Xinerama yes' done, now x crashes. I had it running with Xinerama commented regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de
Re: Xsun has me beat
Quoting Mario Lombardo [EMAIL PROTECTED]: I've been told, you can't run any other client/server besides Xsun__ types on sparc machines. Have you had contrary experience with this? with the 2.4.x you can run XFree86 4.x Servers. I am running 2.4.15-pre3 and XFree86 4.1.x on my Ultra10, and I am happy with it ;-) -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de - This mail sent through IMP: webmail.fht-esslingen.de
Unidentified subject!
Hello, just installed phpmyadmin $apt-get install phpmyadmin it echos: Selecting previously deselected package phpmyadmin. (Reading database ... 100703 files and directories currently installed.) Unpacking phpmyadmin (from .../phpmyadmin_2.2.0-4_all.deb) ... Setting up phpmyadmin (2.2.0-4) ... Includefile /etc/phpmyadmin/apache.conf not found in apache-include_all.sh. index.php settings in /etc/apache/srm.conf found! what does this mean? also /etc/phpmyadmin/config.inc.php does not exist. What can I do? regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de - This mail sent through IMP: webmail.fht-esslingen.de
Re: Xsun has me beat
#startx (using VT number 7) PEXExtensionsInit: Couldn't open default PEX font file Roman_M PEXExtensionsInit: Couldn't open default PEX font file Roman_M waiting for X server to shut down As far as I know, you have to start 'xsun' or 'Xsun'. What kind of machine do you use? Why don't you use 2.4.14(15) and XFree86? regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de - This mail sent through IMP: webmail.fht-esslingen.de
Re: Xsun has me beat
typed Xsun, but now I can't shut it down. What's the key sequence to kill Xsun? It's stuck at the Debian Welcome screen. Mario can't you switch your console with ctrl+alt F1, or kill the server with ctrl+alt+backspace... you will find following similar line in your startx script: defaultserver=/usr/X11R6/bin/X change this to your path to xsun. regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de - This mail sent through IMP: webmail.fht-esslingen.de
Re: Xsun has me beat
Quoting Donald Wu [EMAIL PROTECTED]: I have same message on my SS5, I notice it after exiting X window. I just got that SS5 setup with Debian yesterday. Another problem is the gdm die when I logout X window. Now I stop using gdm to start gnome and X window. Does anyone has come across same problem. If you are using XFree86 just comment following lines, such: Section Module Loadddc LoadGLcore Loaddbe # Loaddri Loadextmod # Loadglx Loadpex5 Loadrecord Loadxie Loadbitmap Loadfreetype Loadspeedo Loadtype1 Loadvbe Loadint10 EndSection regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de - This mail sent through IMP: webmail.fht-esslingen.de
php4/php4-pgsql
Hello, php4-pgsql is not installable on woody, will this be fixed? regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de - This mail sent through IMP: webmail.fht-esslingen.de
Re: sytem freeze / ultra10
thanks alot, dri was commented already, after commenting glx in XF86Config-4 restarting X freezes no more the whole system. best regards Quoting RyuichiKokubo [EMAIL PROTECTED]: Hello, I run woody on SunBlade1000. With XFree86 option glx kernel gets panic on shutting down X. To comment out drt glx from /etc/X11/XF86Config-4 prevent it on my machine. I homp this may help you. Ryuichi Kokubo [EMAIL PROTECTED] -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de - This mail sent through IMP: webmail.fht-esslingen.de
2.4.13-ac4 / shutdown problem
Hello,
Thanks to all debian-sparc people.
Happily running 2.4.13ac4 now. Only shutting down makes following problem:
.
.
hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdc: drive_cmd: status=0xb4
Unmounting local filesystems... done.
flushing ide devices: hda hdc
Systen freeze
hda is hd
hdc is cdrom
following things I see in my syslog, but I don't know what they mean:
--
Oct 29 22:32:14 bwpc050 kernel: Warning: Remapping obsolete /dev/fb*
minor 32 to 1
Oct 29 22:32:14 bwpc050 kernel: Warning: Remapping obsolete /dev/fb*
minor 64 to 2
Oct 29 22:32:14 bwpc050 modprobe: modprobe: Can't locate module fb2
Oct 29 22:32:14 bwpc050 kernel: Warning: Remapping obsolete /dev/fb*
minor 96 to 3
Oct 29 22:32:14 bwpc050 modprobe: modprobe: Can't locate module fb3
Oct 29 22:32:14 bwpc050 kernel: Warning: Remapping obsolete /dev/fb*
minor 128 to 4
Oct 29 22:32:14 bwpc050 modprobe: modprobe: Can't locate module fb4
Oct 29 22:32:14 bwpc050 kernel: Warning: Remapping obsolete /dev/fb*
minor 160 to 5
Oct 29 22:32:14 bwpc050 modprobe: modprobe: Can't locate module fb5
Oct 29 22:32:14 bwpc050 kernel: Warning: Remapping obsolete /dev/fb*
minor 192 to 6
Oct 29 22:32:14 bwpc050 modprobe: modprobe: Can't locate module fb6
Oct 29 22:32:14 bwpc050 kernel: Warning: Remapping obsolete /dev/fb*
minor 224 to 7
Oct 29 22:32:14 bwpc050 modprobe: modprobe: Can't locate module fb7
--
and
ct 29 08:24:25 bwpc050 kernel: hw tcp v4 csum failed
Oct 29 08:24:31 bwpc050 kernel: hw tcp v4 csum failed
Oct 29 08:27:34 bwpc050 kernel: hw tcp v4 csum failed
Oct 29 08:28:51 bwpc050 last message repeated 4 times
Oct 29 08:29:52 bwpc050 last message repeated 2 times
Oct 29 08:30:54 bwpc050 last message repeated 6 times
Oct 29 08:31:44 bwpc050 last message repeated 11 times
Oct 29 08:34:17 bwpc050 kernel: hw tcp v4 csum failed
--
are these messages serious?
best regards
--
Hakan Kuecuekyilmaz, presently intern at
Tecnomatix Technologies Germany | Tel: +49 711 1389- 257
Mittlerer Pfad 9| [EMAIL PROTECTED]
70 499 Stuttgart| [EMAIL PROTECTED]
Studenten, Absolventen und Young Professionals http://www.c-cn.de
2.4.13 ext3
Hello, I downloaded 2.4.13 and ac-patch3. Now I have a working 2.4.13ext3 kernel. It seems to me that my ultra10 is booting much faster now. Only LVM was not compileable. Shutdown makes some problems to, but with ext3 it doesnt hurts really. My question: do I have to patch the kernel with ac1, ac2 and then with ac3 or only with ac3? regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de
sytem freeze / ultra10
Hello, I have still a massive problem with my ultra10, when I am logging out of gnome/gdm my system freezes completely (stop+a dos not work any more, too). I am wondering which logs I have to examine to get rid of this annoying problem. May someone had the same problem. Using 2.4.9 / woody. regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de - This mail sent through IMP: webmail.fht-esslingen.de
Re: sytem freeze / ultra10
Hello, does someone have an working 2.4.x with ext3 on ultra10? regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de - This mail sent through IMP: webmail.fht-esslingen.de
Re: 2.4.12
Newer binutils changed the output of --version. If you edit arch/sparc64/Makefile, look for the NEW_GAS line, and change --version to -V, it will work again. Ben Thanks alot Ben, I am wondering wheter there is a sparc/linux question which you cannot answer ;-) I changed the NEW_GAS Line but now I get following error: bwpc050:/usr/src/linux# time make-kpkg kernel-image . ... ... make[2]: Leaving directory `/usr/src/linux/lib' /usr/bin/make CFLAGS=-D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -m64 -pipe -mno-fpu -mcpu=ultrasparc -mcmodel=medlow -ffixed-g4 -fcall-used-g5 -fcall-used-g7 -Wno-sign-compare -Wa,--undeclared-regs -C arch/sparc64/kernel make[2]: Entering directory `/usr/src/linux/arch/sparc64/kernel' sparc64-linux-gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno-common -m64 -pipe -mno-fpu -mcpu=ultrasparc -mcmodel=medlow -ffixed-g4 -fcall-used-g5 -fcall-used-g7 -Wno-sign-compare -Wa,--undeclared-regs-c -o init_task.o init_task.c init_task.c:7: `INIT_MMAP' undeclared here (not in a function) make[2]: *** [init_task.o] Error 1 make[2]: Leaving directory `/usr/src/linux/arch/sparc64/kernel' make[1]: *** [_dir_arch/sparc64/kernel] Error 2 make[1]: Leaving directory `/usr/src/linux' make: *** [stamp-build] Error 2 regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de
Re: 2.4.12
init_task.c:7: `INIT_MMAP' undeclared here (not in a function) Now that's a known bug. I don't have the patch on hand, but I know that it is fixed in vger CVS. Try 2.4.13? sorry but whats vger? is there an ext3 patch for 2.4.13? -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de
2.4.12
Hello, actually I am running Ultra10 with 2.4.9, but I have problems with gnome/gdm. Logging out of gnome always ends up with a system freeze, even stop+a does no more work. If I kill the X-server instead of logging off, I get kernel messages with this funny guy looking over a wall and X does not work till reboot. So I tried to compile 2.4.9 with ext3 patch, but ... 2.4.12 is compile able but I cannot find an ext3 patch. How get I ext3 or another jfs work on my ULTRA10? regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de - This mail sent through IMP: webmail.fht-esslingen.de
Re: 2.4.12
Hello, After patching 2.4.12 to ac-6 i get following error: sparc64-linux-gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict- prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno- common -m64 -pipe -mno-fpu -mcpu=ultrasparc -mcmodel=medlow -ffixed-g4 -fcall- used-g5 -fcall-used-g7 -Wno-sign-compare -Wa,--undeclared-regs-c -o dma.o dma.c sparc64-linux-gcc -D__KERNEL__ -I/usr/src/linux/include -Wall -Wstrict- prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict-aliasing -fno- common -m64 -pipe -mno-fpu -mcpu=ultrasparc -mcmodel=medlow -ffixed-g4 -fcall- used-g5 -fcall-used-g7 -Wno-sign-compare -Wa,--undeclared-regs- DEXPORT_SYMTAB -c ksyms.c rm -f kernel.o sparc64-linux-ld -r -o kernel.o sched.o fork.o exec_domain.o panic.o printk.o module.o exit.o itimer.o info.o time.o softirq.o resource.o sysctl.o acct.o capability.o ptrace.o timer.o user.o signal.o sys.o kmod.o context.o dma.o ksyms.o make[3]: sparc64-linux-ld: Command not found make[3]: *** [kernel.o] Error 127 make[3]: Leaving directory `/usr/src/linux/kernel' any hints? bye -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] Studenten, Absolventen und Young Professionals http://www.c-cn.de - This mail sent through IMP: webmail.fht-esslingen.de
Re: java for linux sparc
Peter Amrhyn wrote: Hi Know anybody an adress where i can find the jdk for linux under sparc. is this available and uptime. There is a blackdown port at: http://blackdown.orghttp://www.blackdown.org/java-linux/ports.html -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED]
Re: Compiling a kernel
cd /usr/src/linux make menuconfig (again, whatever you prefer) make-kpkg kernel-image cd .. dpkg -i kernel-image-x.x.x_sparc.deb Hello, I installed egcs-sparc64, now I am get this error after make-kpkg kernel-image . make[2]: Entering directory `/usr/src/kernel-source-2.4.9/arch/sparc64/kernel' sparc64-linux-gcc -D__KERNEL__ -I/usr/src/kernel-source-2.4.9/include -Wall - Wstrict-prototypes -Wno-trigraphs -O2 -fomit-frame-pointer -fno-strict- aliasing -fno-common -m64 -pipe -mno-fpu -mcpu=ultrasparc -mcmodel=medlow - ffixed-g4 -fcall-used-g5 -fcall-used-g7 -Wno-sign-compare -Wa,--undeclared- regs-DEXPORT_SYMTAB -c sparc64_ksyms.c sparc64_ksyms.c:166: `atomic_dec_and_lock' undeclared here (not in a function) sparc64_ksyms.c:166: initializer element for `__ksymtab_atomic_dec_and_lock.value' is not constant make[2]: *** [sparc64_ksyms.o] Error 1 make[2]: Leaving directory `/usr/src/kernel-source-2.4.9/arch/sparc64/kernel' make[1]: *** [_dir_arch/sparc64/kernel] Error 2 make[1]: Leaving directory `/usr/src/kernel-source-2.4.9' make: *** [stamp-build] Error 2 ... I have installed kernel-source-2.4.9, the ext3-patch and the headers. But I have no /usr/src/linux directory. Can someone enlighten me? Regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] - This mail sent through IMP: webmail.fht-esslingen.de
Re: Starting to get peeved !!
Quoting Del Campo, Damian [EMAIL PROTECTED]: Hi, I'm still struggling to install Debian to my Sparc2 from floppies. I have 2x 1.3Gb and 1x 440Mb disks I partition them all as Sun Disk Label and then delete partition 1 2 to create the ones I want. The end result (with approx sizes) /sda1 linux nativeu 50Mb/boot /sda2 linux nativeu 800Mb / /sda3 whole disk 1300Mb /sda4 linux swap 450Mb swap /sdb1 linux nativeu 800Mb /usr /sdb2 linux nativeu 500Mb /var /sdb3 whole disk 1300Mb /sdc1 linux nativeu 340Mb /home /sdc2 linux nativeu 100Mb /storage /sdc3 whole disk 440Mb where u = mountable flag. I get through the install but can't make the system bootable from the hard disk. WTF am I doing wrong ??? That you can't boot the system from hard-disk helpes not much here. Could you describe exactly why your system don't boot or where it hangs? regards -- Hakan Kuecuekyilmaz, presently intern at Tecnomatix Technologies Germany | Tel: +49 711 1389- 257 Mittlerer Pfad 9| [EMAIL PROTECTED] 70 499 Stuttgart| [EMAIL PROTECTED] - This mail sent through IMP: webmail.fht-esslingen.de
Re: how to install new kernel
Thomas Duffy wrote: after installing it I have a symlink /vmlinuz - boot/vmlinuz-2.4.7 But my machine wont reboot. How do I have to upgrade my kernel, what packages do I need? well, this symlink seems to be pointing to wrong kernel. or was that a typo? (2.4.7 should be 2.4.9 if you installed that package). it was a typo, it points to *.9 I would make sure that your silo package is also up to date. and what does your /etc/silo.conf look like? I have an ultra10 with UltraSparcII i 440MHz /boot is the first partition fdisk says: /dev/hda1 062 31248 83 Linux native /dev/hda262 584263088 82 Linux swap /dev/hda3 0 17660 89006405 Whole disk /dev/hda4 584 8719 4100040 83 Linux native /dev/hda5 8719 10752 1024632 83 Linux native /dev/hda6 10752 13903 1588104 83 Linux native /dev/hda7 13903 15936 1024632 83 Linux native /dev/hda8 15936 17660868896 83 Linux native whereby /dev/hda8 is / cat /etc/silo.conf: partition=1 root=/dev/hda8 timeout=100 image=1/vmlinuz-2.2.19-sun4u // after first installation label=linux // this was onlu vmlinuz read-only // it only boot this way image=1/vmlinuz-2.4.9-sun4u label=linux_test read-only image=1/vmlinuz label=vmlinuz read-only ll /boot says: -rw-r--r--1 root root 363682 Aug 23 21:00 System.map-2.2.19-sun4u -rw-r--r--1 root root 434708 Aug 11 04:47 System.map-2.4.7 -rw-r--r--1 root root 435851 Aug 30 21:46 System.map-2.4.9 -rw-r--r--1 root root 1024 Aug 10 06:36 cd.b -rw-r--r--1 root root 5256 Aug 23 21:00 config-2.2.19-sun4u -rw-r--r--1 root root16660 Aug 11 04:01 config-2.4.7 -rw-r--r--1 root root16836 Aug 30 21:07 config-2.4.9 -rw-r--r--1 root root 1024 Aug 10 06:36 fd.b -rw-r--r--1 root root 512 Aug 10 06:36 first.b -rw-r--r--1 root root 1024 Aug 10 06:36 generic.b -rw-r--r--1 root root 844 Aug 10 06:36 ieee32.b drwxr-xr-x2 root root12288 Aug 23 20:39 lost+found -rw-r--r--1 root root 7680 Aug 23 20:58 old.b -rw-r--r--1 root root58880 Sep 13 19:21 second.b -rw-r--r--1 root root56490 Aug 10 06:36 silotftp.b -rw-r--r--1 root root 512 Aug 10 06:36 ultra.b lrwxrwxrwx1 root root 14 Aug 23 20:58 vmlinuz - vmlinuz-2.2.19 -rw-r--r--1 root root 1245830 Aug 23 21:00 vmlinuz-2.2.19-sun4u -rw-r--r--1 root root 1342365 Aug 11 04:47 vmlinuz-2.4.7 -rw-r--r--1 root root 1279799 Aug 30 21:46 vmlinuz-2.4.9 what does wont reboot mean? what is the error...how far does it get? ok at boot prompt I tried following: linux - boots fine linux_test or vmlinuz or /vmlinuz-2.4.9-sun4u or /vmlinuz-2.4.7-sun4u - silo says cannot find . may I try it with /vmlinuz-2.4.9? thanks -- Hakan Kuecuekyilmaz, FHT-Esslingen[EMAIL PROTECTED] [... University of Applied Sciences Esslingen Germany...] collaborative encyclopedia project http://www.wikipedia.com
Re: Debian on SunBlade 100 installation error
Reynald MESSERLI wrote: Hello, I'm new to debian and sparc. I'm trying to install Debian on my SunBlade 100, but I'm stuck at the end of the first part of the installation process. I netboot the sun on a freebsd server using the current tftpboot.imp of Ben Collins. The installation starts without problem. I use the following partition sheme on the hard disk: hda1 /boot hda2 /swap hda3 /root hda4 /usr hda5 /home hda6 /var I use the network installation. I add the following module to the kernel : autofs, nfsd, isofs. All the download process goes well until it tries to install the packages. It stops with the following message on the screen: Installing essential packages. At this stage the machine is completely frozen and I have to cold boot. As I guess you are trying to install woody, because I had the same error as I tried to install woody on my ultra10. I actually installing potato and then updating to woody, which causes a lot of trouble. By the way if you are going to install potato and the machine is not booting after you have installed - try /vmlinuz-2.2.19-sun4u at the openprom instead of /vmlinuz I've tried to put the whole disk type (5) on hda3 : same result. I've tried not to include modules in the kernel : same result. I've tried both distribution : test and unstable : same result. Apparently, if I restart the machine and I try the option Make Hard Disk Bootable, it tells me that it cannot install SILO. Thank you all for your help. Reynald MESSERLI [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] -- -- Hakan Kuecuekyilmaz, FHT-Esslingen[EMAIL PROTECTED] [... University of Applied Sciences Esslingen Germany...] international, peer-reviewed encyclopedia www.nupedia.net
potato-woody
Hello, I was running woody for about four weeks on an ultra10 till I messed upped the system. So I had to install woody again. The new installation ended in a horror story: I am installing for three days now. Installing woody directly does not work. So I installed potato then edit sources.list, and did an apt-get upgrade, I was surprised how much was apt-get going to do, but I said yes and apt-get hanged after a while because of a missing library. So today I tried it again, but before the upgrade I made a apt-get install perl. apt get showed again a lot of to do (I think a lot more then it would be good), but it ran all ok. Now I have woody running again, but to my surprise apt-get install postgresql says Sorry, postgresql is ...newest version cat /var/lib/postgres/data/PG_VERSION says 6.5. I *need* at last 7.x, so what is wrong with apt-get or the lists, because a few weeks ago, the same procedure had installed me postgresql 7.1.x. like a charm. PS: I have to admit that I am a Debian-Sparc Newbie, maybe I am doing something fundementally wrong... regards -- Hakan Kuecuekyilmaz, FHT-Esslingen [EMAIL PROTECTED] [... University of Applied Sciences Esslingen Germany...] international, peer-reviewed encyclopedia www.nupedia.net
