Re: Fujitsu Primergy RX100-S2
Am Dienstag 17 Mai 2005 23:05 schrieb Christian Schmidt: > Hello Amira, > > Amira Youssef, 16.05.2005 (d.m.y): > > Does anyone have experince on installing Debian on the fujitsu > > server Primergy RX100-S2? > > Yes, we're running two of these machines with Sarge. We, too. > > Ít has Sata disks and onboard raid controller and support SUSE > > & RedHat WS 3. We would like to purchase that server but afraid > > that Debian may not work with it! Yes, they work fine here, too. > The server itself is running fine with Debian, but we bought > additional SATA RAID Controllers (3ware). Those built-in Promise > stuff sucks. It can be deactivated via BIOS settings. FULLACK. > The 3ware controllers are "real" RAID controllers. Up to now. > theyre working finde. FULLACK. -- Jochen Kaechelin || www.gissmoh.de
ldap admin password
Hi, Where is the ldap admin password. I'm trying to set up ldap and are getting some authentication errors when running the migrationtools. I noticed that there's no rootpw statement in slapd.conf. Don't I need a rootpw statement to run the ldaptools? Thanks. Lars. -- Lars Jensen, Truckee Meadows Community College, Reno NV 89512-3999. Tel: 775.673.7113 E-mail: [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Firefox cannot render amazon website correctly. Epiphany can.
On Thu, 2005-05-19 at 07:13 +0200, Jonathan Kaye wrote: > All > | the buttons and various other graphics (such as the label > | to print out to return an item) are invisible. That happened to me recently. I found that I had Mozills'a "Don't accept graphics from sites other than the one you're talking to" option set, and that allowing graphics from the universe fixed the problem. I tried a little to tell them about it, but [EMAIL PROTECTED] doesn't accept email. Understandable, I guess. -- Glenn English [EMAIL PROTECTED] GPG ID: D0D7FF20 signature.asc Description: This is a digitally signed message part
Re: problem with microphone and alsa -> no sound?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 En/La Martin A. Hansen ha escrit, a 18/05/05 23:37: | i have tried the mic with: | | cat /dev/dsp > /dev/dsp, along with audacity, snd, and sound-recorder. i | never get to hear myself. the mic does work out fine in windows on the | same hardware and connections. | | i dont use kde, but kmix is prolly just the kde frontend to amixer, | where i use alsamixer. | | martin Martin, You say, "I never get to hear myself..." but does the level metre move? I mean does it respond when you talk into your mike? I think in audacity, the default is that you don't hear yourself while you're recording but you push some button (sorry don't remember what it's called) and then you do hear. The important thing is if you see the metre responding the it is receiving input. If nothing happens then there's a problem. Cheers, Jonathan -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.5 (GNU/Linux) iD8DBQFCjCPc64+f0AXUe+4RAjuZAJ9QsDIzUF+K8UnwN8uQz+3XBVmpXQCeI5zs dcxtSueTLkeKey/nsgKJkIU= =MvkY -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Firefox cannot render amazon website correctly. Epiphany can.
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 En/La [EMAIL PROTECTED] ha escrit, a 18/05/05 23:23: | Hello, | | Does anyone else have the same problem I have when trying | to view the www.amazon.co.uk website using firefox? All | the buttons and various other graphics (such as the label | to print out to return an item) are invisible. | | The site displays correctly using epiphany (but printing | from epiphany is broken - bugs 289776 and 289887). | | I am running sarge, with version 1.0.3-2 of the | mozilla-firefox package. | | Thanks, | | Ben Mulvihill | | Hi Ben, I'm also running Sarge with Firefox 1.0.4 (but things were no different in 1.0.3. I'm also running adblock and launchy and dictionary search and linky. I have no problems with amazon.co.uk. In fact I order books from there. Following Michael's idea, you might remove adblock and try it again. If that doesn't work, try reinstalling firefox. I notice the debian package is up to 1.0.4-2 now anyway. Cheers, Jonathan -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.5 (GNU/Linux) iD8DBQFCjCBz64+f0AXUe+4RAnDYAJ94myeVyW5uhcTW6znonxqZRI8l+QCfdCME JZDcVZJzgP5s0vRU0iihQ90= =5ubm -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: not able to edit telugu in yudit
On Wed, May 18, 2005 at 09:37:55PM -0400, Kamaraju Kusumanchi wrote: > This is a long shot as there as not many users who use debian and are > interested in telugu fonts. But I am posting it anyway hoping that > someone has a solution for this. > > I have installed ttf-telugu-fonts and yudit packages in Debian Sid. > > $dpkg -l ttf-telugu-fonts yudit > ii ttf-telugu-fonts 0.4.4 > Free TrueType fonts for the Telugu language > ii yudit 2.7.6-1 > Unicode text editor > > I tried to edit telugu in the following way > > $yudit > > chose kmap setup field. In the popup I have chosen the telugu kmap. But > when I start editing all I see are some square boxes with random letter > in them. Something like > > -- > |0 c | > |6 6 | > -- > > Anyidea how to make telugu fonts work in yudit? Should I file a bug > report against yudit? Hi Kamaraju, this is a comment, not an answer. Those boxes are an indication that there is a missing or unrecognized unicode font, or a misconfigured application font preference. One of the things I would love to see is an application where you could input the 0c66 and output what font would be needed, possibly what debian package would be needed. This should be for any of the non-latin fonts in Debian. There was a recent tibetan font added to Debian, but exactly how would I know that it is correctly installed , what application I can use it with and how to configure that application. Any way, good luck! Kev -- counter.li.org #238656 -- goto counter.li.org and be counted! `$' $' $ $ _ ,d$$$g$ ,d$$$b. $,d$$$b`$' g$b $,d$$b ,$P' `$ ,$P' `Y$ $$' `$ $ "' `$ $$' `$ $$ $ $$g$ $ $ $ ,$P"" $ $$ `$g. ,$$ `$$._ _. $ _,g$P $ `$b. ,$$ $$ `Y$$P'$. `YP $$$P"' ,$. `Y$$P'$ $. ,$. signature.asc Description: Digital signature
usb barcode reader not communicating
I've got a Opticon LG2 USB barcode reader/scanner. I'm trying to use it under Debian Sarge with stock kernel 2.6.8-2-686-smp. When I plug it in, the kernel recognizes it. However, the barcode reader can't transmit data. It seems to be disconnecting then reconnecting over and over. This is the dmesg output: input: USB HID v1.10 Keyboard [OPTICON OPTICON Reader] on usb-:00:02.0-2 usb 1-2: USB disconnect, address 3 ohci_hcd :00:02.0: wakeup usb 1-2: new full speed USB device using address 4 usb 1-2: control timeout on ep0in drivers/usb/input/hid-core.c: ctrl urb status -2 received drivers/usb/input/hid-core.c: timeout initializing reports input: USB HID v1.10 Keyboard [OPTICON OPTICON Reader] on usb-:00:02.0-2 usb 1-2: USB disconnect, address 4 usb 1-2: new full speed USB device using address 5 drivers/usb/input/hid-core.c: ctrl urb status -2 received drivers/usb/input/hid-core.c: timeout initializing reports input: USB HID v1.10 Keyboard [OPTICON OPTICON Reader] on usb-:00:02.0-2 usb 1-2: USB disconnect, address 5 usb 1-2: new full speed USB device using address 6 Any ideas? - Ryan signature.asc Description: Digital signature
Re: [debian] Re: Virii on linux
On Wed, 18 May 2005 21:27:25 -0400 "Roberto C. Sanchez" <[EMAIL PROTECTED]> wrote: > Deboo ^ wrote: > > I've heard people say that virii have come in to linux too, > > nowadays. What kind of virii are these and where can I get info > > about how to secure system against them? Are these the windows > > virii that just enter the gateways or specially written linux virii > > have come out? How much harm can they do? > > > > Not to be pedantic, but the generally accepted plural of virus is > viruses: > > http://en.wikipedia.org/wiki/Plural_of_virus > By definition, you are being pedantic :-) Or at least prescriptive in the terms of the article. > -Roberto > > -- > Roberto C. Sanchez > http://familiasanchez.net/~sanchezr > -- God bless you, Keith Bates 4 Mooloobar St Narrabri NSW 2390 Phone: 02 67924890 Fax: 02 67925418 www.new-life.org.au If you don't have a reason to live JESUS IS THE ANSWER! Ask him into your life today... He really does make a difference. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Virii on linux
these are not windows virii, these are virii specially written and compiled for a linux computer Deboo ^ wrote: I've heard people say that virii have come in to linux too, nowadays. What kind of virii are these and where can I get info about how to secure system against them? Are these the windows virii that just enter the gateways or specially written linux virii have come out? How much harm can they do? Regards, Deboo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
RE: Sarge, coreutils and fileutils
Omg, thanks Roberto. -Original Message- From: Roberto C. Sanchez [mailto:[EMAIL PROTECTED] Sent: Thursday, 19 May 2005 12:48 PM To: Matthew Joyce Cc: debian-user@lists.debian.org Subject: Re: Sarge, coreutils and fileutils Matthew Joyce wrote: > Dear debian-user, > > I decided to build a new intranet today, grabbed sarge-netinst and > booted, installed, great. > > Now i'm trying to 'apt-get install php4' and something unpleasant is > happening. > > intranet:~# apt-get install php4 > Reading Package Lists... Done > Building Dependency Tree... Done > The following extra packages will be installed: > fileutils libdb2 libmm11 > Suggested packages: > phpdoc php4-pear > The following NEW packages will be installed: > fileutils libdb2 libmm11 php4 > 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. > Need to get 0B/1572kB of archives. > After unpacking 4012kB of additional disk space will be used. > Do you want to continue? [Y/n] y > (Reading database ... 11975 files and directories currently > installed.) Unpacking fileutils (from .../fileutils_4.1-10_i386.deb) ... > dpkg: error processing > /var/cache/apt/archives/fileutils_4.1-10_i386.deb > (--unpack): > trying to overwrite `/bin/chgrp', which is also in package coreutils > dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were > encountered while processing: > /var/cache/apt/archives/fileutils_4.1-10_i386.deb > E: Sub-process /usr/bin/dpkg returned an error code (1) > > > I did a bit of googling, and if I'm understanding this correctly, php4 > needs fileutils, fileutils has programs which exist in coreutils which > is installed already. > > http://www.gnu.org/software/coreutils/ > "Previously these utilities were offered as three individual sets of > GNU utilities, fileutils, shellutils, and textutils. Those three > have been combined into a single set of utilities called the coreutils." > > > Is there a way to tell php4 to not install fileutils ? > Should this work automagically ? > I admit, I have always relied of apt-get to just work. > I'm surprised that Sarge out of the box can't install php4. > > Have I missed something ? > Here is what my box gives: $ apt-cache show fileutils Package: fileutils Priority: extra Section: oldlibs Installed-Size: 16 Maintainer: Michael Stone <[EMAIL PROTECTED]> Architecture: all Source: coreutils Version: 5.2.1-2 Pre-Depends: coreutils Filename: pool/main/c/coreutils/fileutils_5.2.1-2_all.deb Size: 9042 MD5sum: c846ba12a55f69a4b147d1fbc67a33a5 Description: The GNU file management utilities (transitional package) Empty package to facilitate upgrades, can be safely removed. $ dpkg -L fileutils /. /usr /usr/share /usr/share/doc /usr/share/doc/fileutils /usr/share/doc/fileutils/copyright /usr/share/doc/fileutils/buildinfo.gz /usr/share/doc/fileutils/changelog.Debian.gz It looks like you are getting the old version of fileutils. Try removing Woody from your sources.list. -Roberto -- Roberto C. Sanchez http://familiasanchez.net/~sanchezr
Re: Sarge, coreutils and fileutils
Matthew Joyce wrote: > Dear debian-user, > > I decided to build a new intranet today, grabbed sarge-netinst and > booted, installed, great. > > Now i'm trying to 'apt-get install php4' and something unpleasant is > happening. > > intranet:~# apt-get install php4 > Reading Package Lists... Done > Building Dependency Tree... Done > The following extra packages will be installed: > fileutils libdb2 libmm11 > Suggested packages: > phpdoc php4-pear > The following NEW packages will be installed: > fileutils libdb2 libmm11 php4 > 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. > Need to get 0B/1572kB of archives. > After unpacking 4012kB of additional disk space will be used. > Do you want to continue? [Y/n] y > (Reading database ... 11975 files and directories currently installed.) > Unpacking fileutils (from .../fileutils_4.1-10_i386.deb) ... > dpkg: error processing /var/cache/apt/archives/fileutils_4.1-10_i386.deb > (--unpack): > trying to overwrite `/bin/chgrp', which is also in package coreutils > dpkg-deb: subprocess paste killed by signal (Broken pipe) > Errors were encountered while processing: > /var/cache/apt/archives/fileutils_4.1-10_i386.deb > E: Sub-process /usr/bin/dpkg returned an error code (1) > > > I did a bit of googling, and if I'm understanding this correctly, php4 > needs fileutils, fileutils has programs which exist in coreutils which > is installed already. > > http://www.gnu.org/software/coreutils/ > "Previously these utilities were offered as three individual sets of GNU > utilities, fileutils, shellutils, and textutils. Those three have > been combined into a single set of utilities called the coreutils." > > > Is there a way to tell php4 to not install fileutils ? > Should this work automagically ? > I admit, I have always relied of apt-get to just work. > I'm surprised that Sarge out of the box can't install php4. > > Have I missed something ? > Here is what my box gives: $ apt-cache show fileutils Package: fileutils Priority: extra Section: oldlibs Installed-Size: 16 Maintainer: Michael Stone <[EMAIL PROTECTED]> Architecture: all Source: coreutils Version: 5.2.1-2 Pre-Depends: coreutils Filename: pool/main/c/coreutils/fileutils_5.2.1-2_all.deb Size: 9042 MD5sum: c846ba12a55f69a4b147d1fbc67a33a5 Description: The GNU file management utilities (transitional package) Empty package to facilitate upgrades, can be safely removed. $ dpkg -L fileutils /. /usr /usr/share /usr/share/doc /usr/share/doc/fileutils /usr/share/doc/fileutils/copyright /usr/share/doc/fileutils/buildinfo.gz /usr/share/doc/fileutils/changelog.Debian.gz It looks like you are getting the old version of fileutils. Try removing Woody from your sources.list. -Roberto -- Roberto C. Sanchez http://familiasanchez.net/~sanchezr signature.asc Description: OpenPGP digital signature
Re: help in sarge testing->stable
Alberto Bert wrote: Hi, I'm running sarge, but I would like to keep using the testing distribution, also after the release. Do you think there will be any kind of problem in the transition between sarge and the new testing? I mean, should I just upgrade my system and everything should work, or there are some important changes I have to deal with? sorry if the question was stupid. thanks Alberto The question is very common and there is nothing stupid about it. May I point you to the FAQ I have written in the past and hosted at http://www.people.cornell.edu/pages/kk288/debian_choosing_distribution.html In particular you might be interested in Q13 - What happens when a new release is made? Q15 - I am currently tracking testing (sarge). What happens when a release is made? Will I still be tracking testing or will my machine be running the new stable distribution? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Virii on linux
Steven Jones wrote: > While several anti-virus companies have "shown" Linux virii in their > labs there has not been one seen in the wild. They have tried really > hard to FUD users into buying their products but generally have failed. > Not Linux, per se, but the slapper worm hit OpenLDAP users a few years back, IIRC. Granted, that is one to the hundreds of MS-target worms in the wild since then. -Roberto -- Roberto C. Sanchez http://familiasanchez.net/~sanchezr signature.asc Description: OpenPGP digital signature
Sarge, coreutils and fileutils
Dear debian-user, I decided to build a new intranet today, grabbed sarge-netinst and booted, installed, great. Now i'm trying to 'apt-get install php4' and something unpleasant is happening. intranet:~# apt-get install php4 Reading Package Lists... Done Building Dependency Tree... Done The following extra packages will be installed: fileutils libdb2 libmm11 Suggested packages: phpdoc php4-pear The following NEW packages will be installed: fileutils libdb2 libmm11 php4 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 0B/1572kB of archives. After unpacking 4012kB of additional disk space will be used. Do you want to continue? [Y/n] y (Reading database ... 11975 files and directories currently installed.) Unpacking fileutils (from .../fileutils_4.1-10_i386.deb) ... dpkg: error processing /var/cache/apt/archives/fileutils_4.1-10_i386.deb (--unpack): trying to overwrite `/bin/chgrp', which is also in package coreutils dpkg-deb: subprocess paste killed by signal (Broken pipe) Errors were encountered while processing: /var/cache/apt/archives/fileutils_4.1-10_i386.deb E: Sub-process /usr/bin/dpkg returned an error code (1) I did a bit of googling, and if I'm understanding this correctly, php4 needs fileutils, fileutils has programs which exist in coreutils which is installed already. http://www.gnu.org/software/coreutils/ "Previously these utilities were offered as three individual sets of GNU utilities, fileutils, shellutils, and textutils. Those three have been combined into a single set of utilities called the coreutils." Is there a way to tell php4 to not install fileutils ? Should this work automagically ? I admit, I have always relied of apt-get to just work. I'm surprised that Sarge out of the box can't install php4. Have I missed something ? Thanks Matthew Joyce Children's Cancer Institute Australia http://www.ccia.org.au
not able to edit telugu in yudit
This is a long shot as there as not many users who use debian and are interested in telugu fonts. But I am posting it anyway hoping that someone has a solution for this. I have installed ttf-telugu-fonts and yudit packages in Debian Sid. $dpkg -l ttf-telugu-fonts yudit ii ttf-telugu-fonts 0.4.4 Free TrueType fonts for the Telugu language ii yudit 2.7.6-1 Unicode text editor I tried to edit telugu in the following way $yudit chose kmap setup field. In the popup I have chosen the telugu kmap. But when I start editing all I see are some square boxes with random letter in them. Something like -- |0 c | |6 6 | -- Anyidea how to make telugu fonts work in yudit? Should I file a bug report against yudit? thanks raju -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
not able to edit telugu in yudit
This is a long shot as there as not many users who use debian and are interested in Linux. But I am posting it anyway hoping that someone has a solution for this. I have installed ttf-telugu-fonts and yudit packages in Debian Sid. $dpkg -l ttf-telugu-fonts yudit ii ttf-telugu-fonts 0.4.4 Free TrueType fonts for the Telugu language ii yudit 2.7.6-1 Unicode text editor I tried to edit telugu in the following way $yudit chose kmap setup field. In the popup I have chosen the telugu kmap. But when I start editing all I see are some square boxes with random letter in them. Something like -- |0 c | |6 6 | -- Anyidea how to make telugu fonts work in yudit? Should I file a bug report against yudit? thanks raju -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Firefox and MIDI
Replies are inline. Jim Nicos Gollan wrote: On Saturday May 14 2005 05:02, Jim Hall wrote: A user needs MIDI to work in Firefox. I installed kernel-image-2.6.8-686, then ALSA. Ran alsaconf. Everything seemed fine, but no MIDI in Firefox. Can't find a plugin. Is there any way to make Firefox recognize and use ALSA? Can you play MIDI files with pmidi? You'll have to do some setup work before you hear any sound unless you have a hardware synth attached to the soundcard. How would I know if there is a "synth" attached to the soundcard? This did help me to get MIDI working: http://houghi.org/user/ch19s09.html The article seems to change locations every now and then, I've had at least three locations go invalid over time. Searching for "ALSA and MIDI" on Google usually does the trick, the page title should be "19.9. ALSA and MIDI". Thank you for the reference. I've read it. However, it refers to KDE. This system is using the Debian default, Gnome. Since I have no idea what the Gnome equivalents are, it doesn't help me much. :) If you're interested in better MIDI quality than most consumer soundcards can handle, I recommend you have a loot at timidity which can also be used as a synth for ALSA: http://timidity.sourceforge.net/ I've looked up timidity in the package lists. Other info I've found seems to indicate it's resource heavy. So, it would be a last resort. Frankly, as long as the sound is halfway reasonable (meaning it doesn't grate on the senses), I don't care about quality. Sets of MIDI patches can be found all over the net. I use the Titanic Soundfont, but that's too big for most cards and needs quite some CPU power. There are smaller ones that can be loaded with sfxload, but don't expect too much (Creative usually ship an 8MB Soundfont on their driver discs). I have no idea what you're talking about here. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: How to see memory usage?
Ibrahim Mubarak wrote: --- John Plate <[EMAIL PROTECTED]> wrote: Hi How can I see the memory usage for each running process? Try 'top'. While there is nothing wrong with top. I sometimes find that gnome-system-monitor is very good for this purpose. With top I cannot see all the processess (but there might be a way to do it) but with gnome-system-monitor you can see all the processes and their memory usage. hth raju -- Kamaraju Kusumanchi Graduate Student Cornell University Ithaca, NY, USA -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
RE: Virii on linux
While several anti-virus companies have "shown" Linux virii in their labs there has not been one seen in the wild. They have tried really hard to FUD users into buying their products but generally have failed. What is annoying is being forced to incl a anti-virus package on a Linux server to protect Windows clients and then have the same a-holes claim anti-virus software is a neutral thing in TCO calcs as it is always needed. Most virii operate with only windows and only Outlook, so it usually takes both for a successful virus spread. On linux we have neither. Worms etc are another matter, you can do a lot to harden a box, then add a firewall and then run some services on non-standard ports, eg ssh on say 49 (or something). While this is not going to stop a live hacker who scans, it will defeat lots of automated bots searching for a vulnerable sshd implementation. Regards Thing -Original Message- From: Mauro Parra [mailto:[EMAIL PROTECTED] Sent: Thursday, 19 May 2005 1:14 p.m. To: [EMAIL PROTECTED] Cc: debian-user@lists.debian.org Subject: Re: Virii on linux Hello, On 5/18/05, Deboo ^ <[EMAIL PROTECTED]> wrote: > I've heard people say that virii have come in to linux too, nowadays. > What kind of virii are these and where can I get info about how to > secure system against them? You can get more info at this links: http://www.theregister.co.uk/2003/10/06/linux_vs_windows_viruses/ http://librenix.com/?inode=21 Regards, Mauro
Re: Virii on linux
Deboo ^ wrote: > I've heard people say that virii have come in to linux too, nowadays. > What kind of virii are these and where can I get info about how to > secure system against them? Are these the windows virii that just > enter the gateways or specially written linux virii have come out? How > much harm can they do? > Not to be pedantic, but the generally accepted plural of virus is viruses: http://en.wikipedia.org/wiki/Plural_of_virus -Roberto -- Roberto C. Sanchez http://familiasanchez.net/~sanchezr signature.asc Description: OpenPGP digital signature
Re: Getting a Dinamic Remote IP
Rick Macdonald wrote: > Charles Hallenbeck wrote: > >> Hi, >> >> You need to obtain a program called "ddclient" from the dyndns.org >> site, which you run on your system. It will check to see if dyndns.org >> has the correct IP address every few minutes, and tell dyndns.org >> about it when it changes. > > > It's also a debian package: > > apt-get install ddclient > > However, the deb version is 3.6.2 but the latest is actually 3.6.6. > True. But up until I switched my server from Woody to Sarge a couple of weeks ago, I was running the *Woody* version of ddclient! There are no issues of which I am aware that prevent an older client from speaking the correct protocol. -Roberto -- Roberto C. Sanchez http://familiasanchez.net/~sanchezr signature.asc Description: OpenPGP digital signature
Re: Virii on linux
Hello, On 5/18/05, Deboo ^ <[EMAIL PROTECTED]> wrote: > I've heard people say that virii have come in to linux too, nowadays. > What kind of virii are these and where can I get info about how to > secure system against them? You can get more info at this links: http://www.theregister.co.uk/2003/10/06/linux_vs_windows_viruses/ http://librenix.com/?inode=21 Regards, Mauro
Re: cdrecord failiure with kernel 2.6.8-2-686
Vegard|drageV wrote: > On 5/18/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > > ATA didn't work for me, but but ATAPI did: > > cdrecord -v speed=4 dev=ATAPI:0,1,0 image.iso I'd try and use ATA if possible. ATAPI doesn't use DMA so you're more prone to making coasters. See if "cdrecord -scanbus dev=ATA" shows anything. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Getting a Dinamic Remote IP
Charles Hallenbeck wrote: Hi, You need to obtain a program called "ddclient" from the dyndns.org site, which you run on your system. It will check to see if dyndns.org has the correct IP address every few minutes, and tell dyndns.org about it when it changes. It's also a debian package: apt-get install ddclient However, the deb version is 3.6.2 but the latest is actually 3.6.6. Changelog 3.6.6 - support for olitec-SX200 - added sample-etc_rc.d_init.d_ddclient.lsb as a sample script for lsb-compliant systems. - support for linksys wrt854g (thanks to Nick Triantos) - support for linksys ver 3 - support for Thomson (Alcatel) SpeedTouch 510 (thanks to Aldoir) - Cosmetic fixes submitted by John Owens 3.6.5 - there was a bug in the linksys-ver2 - support for postscript (thanks to Larry Hendrickson) - Changelog out of README - modified all documentation to use /etc/ddclient/ddclient.conf (notified by nicolasmartin in bug [1070646]) 3.6.4 - added support for NameCheap service (thanks to Dan Boardman) - added support for linksys ver2 (thanks to Dan Perik) 3.6.3 - renamed sample-etc_dhclient-enter-hooks to sample-etc_dhclient-exit-hooks - add support for the Allnet 1298 Router - add -a to ifconfig to query all interfaces (for Solaris and OpenBSD) - update the process status to reflect what is happening. - add a To: line when sending e-mail - add mail-failure to send mail on failures only - try all addresses for multihomed hosts (like check.dyndns.org) - add support for dnspark - add sample for OrgDNS.org ...RickM... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: problem while installing vmware 5.0 on debian
mmm.. now i have another problem.. I've tried to install with the all distro version, it wouldn't work.. but, i tried alien version (converting rpm to deb), it installed.. but then, the vmware-config.pl doesn't work still.. so i tried uninstall the alien version.. then tries to install with all distro version again.. sadly, it just gave me an error: A previous installation of VMware software has been detected. Failure Execution aborted. is there any way of deleting all related files and reinstall everything? -- www.programer.name - my own personal blog : )
Virii on linux
I've heard people say that virii have come in to linux too, nowadays. What kind of virii are these and where can I get info about how to secure system against them? Are these the windows virii that just enter the gateways or specially written linux virii have come out? How much harm can they do? Regards, Deboo -- Please don't Cc: me, I'm subscribed to the list.
Industry News
Hi, Speed up your dialup connection 5 times! Find out more: 1clickunlimited.com Sincerely, Sam Hilton red pair green grapefruit That dentist is not enjoying writing near my home.. Until that day, he could not hear the language differences. He asked for the computer every day by pointing to it. He was allowed to spend time each day on the noun program. One year later he was talking in full sentences and was staffed into normal preschool.. brown apple black strawberry Have you hated surfing lately?. That computer programmer isn't enjoying swimming behind the post office right at this time.
Re: About Sarge's bootup
Is there any documentation anywhere describing how the different mechanisms for loading modules fit together? As well as /etc/modules, /etc/modules.conf, /etc/modprobe.d, /etc/modutils and hotplug there a default install now also has discover. Ben Mulvihill -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Firefox cannot render amazon website correctly. Epiphany can.
On 18 May 2005 14:23:39 -0700, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Hello, > > Does anyone else have the same problem I have when trying > to view the www.amazon.co.uk website using firefox? All > the buttons and various other graphics (such as the label > to print out to return an item) are invisible. > > The site displays correctly using epiphany (but printing > from epiphany is broken - bugs 289776 and 289887). > > I am running sarge, with version 1.0.3-2 of the > mozilla-firefox package. > > Thanks, > > Ben Mulvihill > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > Do you have adblock installed? Maybe you made an adblock entry that was a little too broad and blocked more than you meant to.
Re: Firefox cannot render amazon website correctly. Epiphany can.
On Wednesday 18 May 2005 22:23, [EMAIL PROTECTED] wrote: > Does anyone else have the same problem I have when trying > to view the www.amazon.co.uk website using firefox? All > the buttons and various other graphics (such as the label > to print out to return an item) are invisible. Sounds like you have some weird extensions installed, to be honest :) -- Lee. Please send replies to the list, not to my email address. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Firefox cannot render amazon website correctly. Epiphany can.
Hello, Does anyone else have the same problem I have when trying to view the www.amazon.co.uk website using firefox? All the buttons and various other graphics (such as the label to print out to return an item) are invisible. The site displays correctly using epiphany (but printing from epiphany is broken - bugs 289776 and 289887). I am running sarge, with version 1.0.3-2 of the mozilla-firefox package. Thanks, Ben Mulvihill -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Vote : Rolex or Cartier or Breitling
Omega Watch http://Vito.lzac.com/replica/vron/monotone.html Fake Rolex Watch -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Kaffeine: divx video suddenly doesn't work
On 5/18/05, Michael Appleman <[EMAIL PROTECTED]> wrote: > On 5/16/05, Michael Appleman <[EMAIL PROTECTED]> wrote: > > On 5/16/05, Lee Braiden <[EMAIL PROTECTED]> wrote: > > > On Monday 16 May 2005 18:40, Michael Appleman wrote: > > > > For some reason the video in movie files with divx video doesn't show > > > > anymore. The sound plays fine, but the video is just blank. wmv and > > > > plain > > > > mpeg2 videos play fine. I have the complete codec pack from the mplayer > > > > website installed, same as before when it worked. I even tried purging > > > > kaffeine and reinstalling it, but still no go. Any ideas? I'm using > > > > testing. > > > > > > Are they the same divx videos that used to work? If not, don't assume > > > that > > > they should. > > > > > > Otherwise, try running kaffeine from the console, to see what messages you > > > get. Also, try xine, since it uses the same engine, and maybe mplayer > > > too. > > > Another thing is that you could try rebooting, in case your xv or x11 > > > driver > > > somehow got messed up. It does *sound* OK from judging from the way you > > > say > > > that mpeg2 vids play alright, but it's worth checking, nonetheless. > > > > > > -- > > > Lee. > > > > > > Please send replies to the list, not to my email address. > > > > > > -- > > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > > > > > > > Yeah, these are the same vids that used to work (ogm, mkv, and avi > > files). I ran kaffeine from the console and nothing jumped out at me, > > I attached the output so you could take a look. Thanks! > > > Well I got around to rebooting, and still no go. Also tried it in > normal xine, and I got a dialog box that icouldn't fully read, the > text went off the window. I attached a screenshot of it. The video > didn't show. And I went to try in mplayer, but apparantly there is no > mplayer package in testing? > > "Stregone:/home/stregone# wajig install mplayer > Reading Package Lists... Done > Building Dependency Tree... Done > Package mplayer is not available, but is referred to by another package. > This may mean that the package is missing, has been obsoleted, or > is only available from another source > E: Package mplayer has no installation candidate" > Whoops, I forgot to attach the file. <>
Re: Which JVM to install ?
On 18/05/05 18:04 Paulo Marcel Coelho Aragão wrote: On Wed, May 18, 2005 at 12:30:21PM -0400, Roberto C. Sanchez wrote: Depends on what for. If you wan the best possible compatibility, get a Sun or IBM JVM and then use the make-jpkg command (in the java-package package) to create a .deb file that you can install on your system. Thanks for the suggestion, Roberto. I'll try Sun's, following your instructions. I think the yardstick to go by is to use Sun's if you need the most recent version, or use IBM otherwise, since it's more likely to be well optimised and by now debugged. Adam -- Linux 2.6.11 Debian -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: iptables and masquerading: how to allow vpnc from lan
On 18/05/05 15:23 H. S. wrote:
Hi,
I am running an old computer as a router using Debian Sarge and kernel
2.6.10 kernel and iptables 1.2.11-10. Here is my setup:
CompR
,---.
(INTERNET) -->ppp0--->eth1eth0 >SWITCH--->192.168.0.0/24
`---'
CompR(which contains eth0 and eth1) is the router computer (doing NAT or
IP masquerading) running iptables and doing masquerading. ppp0, the ADSL
modem, has my external internet address given by my ISP. eth1 is
192.168.2.10 and eth0 is 192.168.0.1. My LAN is 192.168.0.0/16.
Before I set up this computer I had a D-Link router in its place with
the option of VPN enabled. At that time, a Windows machine in my LAN was
able to connect to an external VPN server(at my university) using a VPN
client (Cisco's) and was able to sustain the connection.
After I set up my router computer(and removed D-Link router), the
Windows client can connect to the external VPN server but cannot sustain
the connection. The connection seems to be breaking multiple times every
hour. I have been trying various rules (searched from google) and have
this stanza relating to this in CompR's iptables rules set:
# --- IN ---
for VPNS in $VPN_SERVERS; do
$IPTABLES -A INPUT -p udp -s $VPNS \
-i $EXTIF --dport 500 -j ACCEPT
done
# --- OUT ---
for VPNS in $VPN_SERVERS; do
$IPTABLES -A OUTPUT -p udp -d $VPNS \
-o $EXTIF --dport 500 -j ACCEPT
done
$IPTABLES -A FORWARD -i ${EXTIF} -p tcp --dport 500 -j ACCEPT
$IPTABLES -A FORWARD -i ${EXTIF} -p udp --dport 500 -j ACCEPT
$IPTABLES -t nat -A PREROUTING -p udp -i ${EXTIF} \
--dport 500 -j DNAT --to-destination 192.168.0.15:500
After the Windows client (192.168.0.15) connects, I do not see any
traffic any 500 port when I use "iptables -nvL" command to see what is
going on in CompR. Looks like none of the above rules is accepting any
packets at all.
Dunno much about iptables even though I run it in the same setup as
yourself. But you can find out what is happening to your awol packets on
the output of that command by seeing which chain is dropping them all.
Also check out your nat chains with iptables -t nat -nvL
Adam
--
Linux 2.6.11 Debian
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: An EXCELLENT Microsoft ... MS is in trouble from OpenSource OSes like Linux
Derrick Hudson wrote: | > | > ... and I thought MS products would stop sucking as soon as they started | > making vacuums. | | Is that a reference only us greybeards would understand? ;) It's a play on the word "suck". If software sucks, its bad. If a vacuum sucks, it is working. -D You could also interpret it as Microsoft can't do anything right so if they started making vacuums their products (vacuums) wouldn't suck, which would be bad. (For anyone who paid for them!) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Kaffeine: divx video suddenly doesn't work
On 5/16/05, Michael Appleman <[EMAIL PROTECTED]> wrote: > On 5/16/05, Lee Braiden <[EMAIL PROTECTED]> wrote: > > On Monday 16 May 2005 18:40, Michael Appleman wrote: > > > For some reason the video in movie files with divx video doesn't show > > > anymore. The sound plays fine, but the video is just blank. wmv and plain > > > mpeg2 videos play fine. I have the complete codec pack from the mplayer > > > website installed, same as before when it worked. I even tried purging > > > kaffeine and reinstalling it, but still no go. Any ideas? I'm using > > > testing. > > > > Are they the same divx videos that used to work? If not, don't assume that > > they should. > > > > Otherwise, try running kaffeine from the console, to see what messages you > > get. Also, try xine, since it uses the same engine, and maybe mplayer too. > > Another thing is that you could try rebooting, in case your xv or x11 driver > > somehow got messed up. It does *sound* OK from judging from the way you say > > that mpeg2 vids play alright, but it's worth checking, nonetheless. > > > > -- > > Lee. > > > > Please send replies to the list, not to my email address. > > > > -- > > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > > > > > Yeah, these are the same vids that used to work (ogm, mkv, and avi > files). I ran kaffeine from the console and nothing jumped out at me, > I attached the output so you could take a look. Thanks! > Well I got around to rebooting, and still no go. Also tried it in normal xine, and I got a dialog box that icouldn't fully read, the text went off the window. I attached a screenshot of it. The video didn't show. And I went to try in mplayer, but apparantly there is no mplayer package in testing? "Stregone:/home/stregone# wajig install mplayer Reading Package Lists... Done Building Dependency Tree... Done Package mplayer is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package mplayer has no installation candidate"
Re: Getting a Dinamic Remote IP
Hi, You need to obtain a program called "ddclient" from the dyndns.org site, which you run on your system. It will check to see if dyndns.org has the correct IP address every few minutes, and tell dyndns.org about it when it changes. Ch;uck On Wed, 18 May 2005, Romulo Sousa wrote: Hello again, Thanks for gimme a way to start everybody. I visited https://www.dyndns.org/ and created my account there. My doubt now is that how my ip will be updated on dyndns's "database" all the time its changes? For instance: if I have the following domain: mydomain.dyndns.org -> 200.x.y.z -> means "pointing to the public ip" after the renew from my ISP's dhcp server: mydomain.dyndns.org -> 200.a.b.c how my.domain.dyndns.org is gonna "chase" the new ip provided by my ISP in order to get the new ip from there? Please, if I was not clear on my doubt, let me know. By the way, I loved the joke and now I wanna make a little SOHO's proxy. I'm studying how it works but I haven't found if I'm able to authenticate user's from my /home/* only to use it as proxy through mydomain.dyndns.org. In order words, I give my girlfriend mydomain.dyndns.org as well as the port and she, and only she, can access the proxy server after an authentication from his job for instance. Is it possible?? Ok, I went to far. Step by stepbut I would be glad if I have some clues to start kidding around this subject. Thank you all, Romulo Sousa On 5/18/05, starmoon <[EMAIL PROTECTED]> wrote: Sven Arvidsson wrote: Romulo Sousa wrote: I would like to get an remote IP. It's about my girlfriend's computer where I share some directories and install some packages. The problem is that all the time I need to connect via ssh into her computer I must call her asking for its IP provided by her ISP throughout ifconfig output. What can I do in order to get the IP from her computer all the time the machine is booted? Is it possible to send a message by email, SMS or whatever way to do that? Further, her computer is connected by a ADSL (dinamic) and my computer uses cable modem (dinamic also). The best way to solve the problem is that she have a dynamic dns. There are many websites supply free dynamic dns. You can find and register one. And then install the client application on the computer in order to refresh the ip address when she dial up. So you just only keep the domain in mind. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] -- The Moon is Waxing Gibbous (74% of Full) There are 10 kinds of people in the world: Those who count in binary, and those who do not. You can download some things from http://www.mhcable.com/~chuckh -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Getting a Dinamic Remote IP
Hello again, Thanks for gimme a way to start everybody. I visited https://www.dyndns.org/ and created my account there. My doubt now is that how my ip will be updated on dyndns's "database" all the time its changes? For instance: if I have the following domain: mydomain.dyndns.org -> 200.x.y.z -> means "pointing to the public ip" after the renew from my ISP's dhcp server: mydomain.dyndns.org -> 200.a.b.c how my.domain.dyndns.org is gonna "chase" the new ip provided by my ISP in order to get the new ip from there? Please, if I was not clear on my doubt, let me know. By the way, I loved the joke and now I wanna make a little SOHO's proxy. I'm studying how it works but I haven't found if I'm able to authenticate user's from my /home/* only to use it as proxy through mydomain.dyndns.org. In order words, I give my girlfriend mydomain.dyndns.org as well as the port and she, and only she, can access the proxy server after an authentication from his job for instance. Is it possible?? Ok, I went to far. Step by stepbut I would be glad if I have some clues to start kidding around this subject. Thank you all, Romulo Sousa On 5/18/05, starmoon <[EMAIL PROTECTED]> wrote: > > > Sven Arvidsson wrote: > > >Romulo Sousa wrote: > > > > > >>I would like to get an remote IP. It's about my girlfriend's computer > >>where I share some directories and install some packages. The problem > >>is that all the time I need to connect via ssh into her computer I > >>must call her asking for its IP provided by her ISP throughout > >>ifconfig output. > >>What can I do in order to get the IP from her computer all the time > >>the machine is booted? Is it possible to send a message by email, SMS > >>or whatever way to do that? Further, her computer is connected by a > >>ADSL (dinamic) and my computer uses cable modem (dinamic also). > >> > > > > > The best way to solve the problem is that she have a dynamic dns. There are > many websites supply free dynamic dns. You can find and register one. And > then install the client application on the computer in order to refresh the > ip address when she dial up. So you just only keep the domain in mind. > > > -- > To UNSUBSCRIBE, email to [EMAIL PROTECTED] > with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED] > >
Re: problem with microphone and alsa -> no sound?
i have tried the mic with: cat /dev/dsp > /dev/dsp, along with audacity, snd, and sound-recorder. i never get to hear myself. the mic does work out fine in windows on the same hardware and connections. i dont use kde, but kmix is prolly just the kde frontend to amixer, where i use alsamixer. martin On Wed, May 18, 2005 at 07:47:05PM +0200, Jonathan Kaye wrote: > -BEGIN PGP SIGNED MESSAGE- > Hash: SHA1 > > En/La Martin A. Hansen ha escrit, a 18/05/05 14:02: > | ok > | > | > | i have now gone over the reports in the mail achive and they seem to > be concered with missing > | capture or mic level set to 0. > | > | however, i dont think that is the problem here, because according to > the amixer dump i posted, > | that is not the case here: > | > | > | Simple mixer control 'Mic',0 > | Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch > cswitch-joined cswitch-exclusive > | Capture exclusive group: 0 > | Playback channels: Mono > | Capture channels: Front Left - Front Right > | Limits: Playback 0 - 31 > | Mono: Playback 31 [100%] [on] > | Front Left: Capture [on] > | Front Right: Capture [on] > | > | > | so any suggestions are indeed most welcome. > | > | > | best regards > | > | > | martin > | > | > | > | On Sat, May 14, 2005 at 08:48:41PM +0200, wrote: > | > |>hi > |> > |> > |>i cant get my microphone to work with alsa. i need help :o) > |> > |> > |>[EMAIL PROTECTED]:/home/maasha# dpkg -l |grep alsa > |>ii alsa-base 1.0.8-7ALSA driver configuration files > |>ii alsa-oss 1.0.8-1ALSA wrapper for OSS applications > |>ii alsa-utils 1.0.8-4ALSA utilities > |>rc alsaconf 0.4.3b-4 ALSA configurator > |> > |>[EMAIL PROTECTED]:/home/maasha# lspci | grep Multi > |>:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER > (ICH5/ICH5R) AC'97 Audio Controller (rev 02) > |>:02:02.0 Multimedia controller: Philips Semiconductors SAA7134 > (rev 01) > |> > |>[EMAIL PROTECTED]:/home/maasha# lsmod | grep snd > |>snd_pcm_oss53444 1 > |>snd_mixer_oss 19104 2 snd_pcm_oss > |>snd_intel8x0 32964 3 > |>snd_ac97_codec 58820 1 snd_intel8x0 > |>snd_pcm92992 2 snd_pcm_oss,snd_intel8x0 > |>snd_timer 25152 1 snd_pcm > |>snd_page_alloc 12324 2 snd_intel8x0,snd_pcm > |>snd_mpu401_uart 8608 1 snd_intel8x0 > |>snd_rawmidi24384 1 snd_mpu401_uart > |>snd_seq_device 9284 1 snd_rawmidi > |>snd55364 11 > snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device > |>soundcore 11136 4 saa7134,snd > |> > |>[EMAIL PROTECTED]:/home/maasha# amixer > |>Simple mixer control 'Master',0 > |> Capabilities: pvolume pswitch pswitch-joined > |> Playback channels: Front Left - Front Right > |> Limits: Playback 0 - 31 > |> Front Left: Playback 31 [100%] [on] > |> Front Right: Playback 31 [100%] [on] > |>Simple mixer control 'PCM',0 > |> Capabilities: pvolume pswitch pswitch-joined > |> Playback channels: Front Left - Front Right > |> Limits: Playback 0 - 31 > |> Front Left: Playback 31 [100%] [on] > |> Front Right: Playback 31 [100%] [on] > |>Simple mixer control 'Surround',0 > |> Capabilities: pvolume pswitch > |> Playback channels: Front Left - Front Right > |> Limits: Playback 0 - 31 > |> Front Left: Playback 0 [0%] [off] > |> Front Right: Playback 0 [0%] [off] > |>Simple mixer control 'Center',0 > |> Capabilities: pvolume pvolume-joined pswitch pswitch-joined > |> Playback channels: Mono > |> Limits: Playback 0 - 31 > |> Mono: Playback 31 [100%] [off] > |>Simple mixer control 'LFE',0 > |> Capabilities: pvolume pvolume-joined pswitch pswitch-joined > |> Playback channels: Mono > |> Limits: Playback 0 - 31 > |> Mono: Playback 0 [0%] [off] > |>Simple mixer control 'Line',0 > |> Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined > cswitch-exclusive > |> Capture exclusive group: 0 > |> Playback channels: Front Left - Front Right > |> Capture channels: Front Left - Front Right > |> Limits: Playback 0 - 31 > |> Front Left: Playback 31 [100%] [on] Capture [off] > |> Front Right: Playback 31 [100%] [on] Capture [off] > |>Simple mixer control 'CD',0 > |> Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined > cswitch-exclusive > |> Capture exclusive group: 0 > |> Playback channels: Front Left - Front Right > |> Capture channels: Front Left - Front Right > |> Limits: Playback 0 - 31 > |> Front Left: Playback 31 [100%] [on] Capture [off] > |> Front Right: Playback 31 [100%] [on] Capture [off] > |>Simple mixer control 'Mic',0 > |> Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch > cswitch-joined cswitch-exclusive > |> Capture exclusive group: 0 > |> Playback channels: Mono > |> Capture channels: Front Left - Front Right > |> Limits: Playback 0 - 31 > |> Mono: Playb
ATI driver errors after last dist-upgrade ([fglrx:firegl_rmmap] *ERROR* map 0xde28ff10 still in use)
after last aptitude ugg (upgrade of everything) I suddenly see huge number of error message like this in /var/log/syslog: May 17 22:02:37 jojda kernel: [fglrx:firegl_rmmap] *ERROR* map 0xde28ff10 still in use (map_count=1) there is huge number of them (436 between May 18 07:45:31 and May 18 11:55:01) and thery seem to be printed even if there's no openGL app running. relevant system info: debian unstable kernel 2.6.9 Radeon 9800 Pro ati driver: fglrx_4_3_0-8.10.19-1.i386.rpm (via alien) more details: openGL used to work before last upgrade, no error messages. It still works but it freezes for short periods of time (when the messages are written to syslog) so it's not very usable anymore. haven't found much info on google, except of somebody suggesting setting UseFastTLS "2" (instead of default 0) in X config, haven't tried that yet but does anybody know more details? Apparently it's some change in X server that triggers this problem (don't know whether it's ati driver problem or X server problem). any details? TIA erik -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: any particular reason why jailkit has not been packaged?
On Wednesday 18 May 2005 21:51, Alexandru Cabuz wrote: > Is there any particular reason why jailkit has not been packaged? License > problems perhaps? Looks like the author himself was planning to package it at one point. If I'm reading the bug report right, that is. Which I'm probably not ;) Anyway. Normally, you'd see a list of problems holding back the package, but there don't seem to be any follow up issues for jailkit, so maybe he just lost interest: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=268254 -- Lee. Please send replies to the list, not to my email address. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
any particular reason why jailkit has not been packaged?
Is there any particular reason why jailkit has not been packaged? License problems perhaps? Alex. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Configuring X on Intel 82845 gl board
Forgive me if[sic] this is irrelevant nonsense (I know precious
little about this stuff; I've only been scrutinizing the ouput
you have provided), but ...
On Wed, May 18, 2005 at 07:20:29PM -, shatam bhattacharya wrote:
[...]
> 2) I still cant apt-get update (the same problem i.e. (1.0.0.0) hang
> persists.)
> I suspect the route output will give you a clue ---
>
> ginie:/home/shatam# route -n
> Kernel IP routing table
> Destination Gateway Genmask Flags Metric RefUse Iface
> 192.168.1.0 0.0.0.0 255.255.255.0 U 0 00 eth0
> 0.0.0.0 192.168.1.1 0.0.0.0 UG0 00 eth0
> Just to rebrief I am using a DSL router (192.168.1.1) and an ethernet card
> whose ifconfig shows ---
> ginie:/home/shatam# ifconfig
> eth0 Link encap:Ethernet HWaddr 00:08:A1:32:E1:7E
> inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
> UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
> RX packets:3252 errors:0 dropped:0 overruns:0 frame:0
> TX packets:3406 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:100
> RX bytes:2884677 (2.7 MiB) TX bytes:580437 (566.8 KiB)
> Interrupt:18 Base address:0xac00
>
> loLink encap:Local Loopback
> inet addr:127.0.0.1 Mask:255.0.0.0
> UP LOOPBACK RUNNING MTU:16436 Metric:1
> RX packets:388 errors:0 dropped:0 overruns:0 frame:0
> TX packets:388 errors:0 dropped:0 overruns:0 carrier:0
> collisions:0 txqueuelen:0
> RX bytes:19848 (19.3 KiB) TX bytes:19848 (19.3 KiB)
>
... if I remember rightly, you recently posted your dmesg output
which showed your single ethernet card being recognized twice - as
eth0 (associated with the via Rhine driver) and eth1 (associated
with the 8139too driver). Since 8139too seems to be the correct
driver, but ifconfig shows eth0, could the problems stem from your
having the wrong driver from the card?
As I said, pure surmise; I have no idea how these things work :-{
Cheers,
David
--
David Jardine
"Running Debian GNU/Linux and
loving every minute of it." -L. von Sacher-M.(1835-1895)
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Package: sarge-i386-netinst.iso
On Wednesday 18 May 2005 19:02, Andreas Mantke wrote: > I tried to install this iso on a Pentium I 166 MMX with Atapi-Cdrom. > The install-process stops with LI Read the LILO docs. They explain this exact issue. -- Lee. Please send replies to the list, not to my email address. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
GRUB gfxmenu
How I can build cool grub menu and from where i can read instructions to make "message" file or download samples. Thanks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Package: sarge-i386-netinst.iso
Hi, I tried to install this iso on a Pentium I 166 MMX with Atapi-Cdrom. The install-process stops with LI I think, there is a problem with Lilo, but I am not able to fix this problem. If You need more information, please contact me. Regards, Andreas -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: problem with microphone and alsa -> no sound?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 En/La Martin A. Hansen ha escrit, a 18/05/05 14:02: | ok | | | i have now gone over the reports in the mail achive and they seem to be concered with missing | capture or mic level set to 0. | | however, i dont think that is the problem here, because according to the amixer dump i posted, | that is not the case here: | | | Simple mixer control 'Mic',0 | Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive | Capture exclusive group: 0 | Playback channels: Mono | Capture channels: Front Left - Front Right | Limits: Playback 0 - 31 | Mono: Playback 31 [100%] [on] | Front Left: Capture [on] | Front Right: Capture [on] | | | so any suggestions are indeed most welcome. | | | best regards | | | martin | | | | On Sat, May 14, 2005 at 08:48:41PM +0200, wrote: | |>hi |> |> |>i cant get my microphone to work with alsa. i need help :o) |> |> |>[EMAIL PROTECTED]:/home/maasha# dpkg -l |grep alsa |>ii alsa-base 1.0.8-7ALSA driver configuration files |>ii alsa-oss 1.0.8-1ALSA wrapper for OSS applications |>ii alsa-utils 1.0.8-4ALSA utilities |>rc alsaconf 0.4.3b-4 ALSA configurator |> |>[EMAIL PROTECTED]:/home/maasha# lspci | grep Multi |>:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02) |>:02:02.0 Multimedia controller: Philips Semiconductors SAA7134 (rev 01) |> |>[EMAIL PROTECTED]:/home/maasha# lsmod | grep snd |>snd_pcm_oss53444 1 |>snd_mixer_oss 19104 2 snd_pcm_oss |>snd_intel8x0 32964 3 |>snd_ac97_codec 58820 1 snd_intel8x0 |>snd_pcm92992 2 snd_pcm_oss,snd_intel8x0 |>snd_timer 25152 1 snd_pcm |>snd_page_alloc 12324 2 snd_intel8x0,snd_pcm |>snd_mpu401_uart 8608 1 snd_intel8x0 |>snd_rawmidi24384 1 snd_mpu401_uart |>snd_seq_device 9284 1 snd_rawmidi |>snd55364 11 snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device |>soundcore 11136 4 saa7134,snd |> |>[EMAIL PROTECTED]:/home/maasha# amixer |>Simple mixer control 'Master',0 |> Capabilities: pvolume pswitch pswitch-joined |> Playback channels: Front Left - Front Right |> Limits: Playback 0 - 31 |> Front Left: Playback 31 [100%] [on] |> Front Right: Playback 31 [100%] [on] |>Simple mixer control 'PCM',0 |> Capabilities: pvolume pswitch pswitch-joined |> Playback channels: Front Left - Front Right |> Limits: Playback 0 - 31 |> Front Left: Playback 31 [100%] [on] |> Front Right: Playback 31 [100%] [on] |>Simple mixer control 'Surround',0 |> Capabilities: pvolume pswitch |> Playback channels: Front Left - Front Right |> Limits: Playback 0 - 31 |> Front Left: Playback 0 [0%] [off] |> Front Right: Playback 0 [0%] [off] |>Simple mixer control 'Center',0 |> Capabilities: pvolume pvolume-joined pswitch pswitch-joined |> Playback channels: Mono |> Limits: Playback 0 - 31 |> Mono: Playback 31 [100%] [off] |>Simple mixer control 'LFE',0 |> Capabilities: pvolume pvolume-joined pswitch pswitch-joined |> Playback channels: Mono |> Limits: Playback 0 - 31 |> Mono: Playback 0 [0%] [off] |>Simple mixer control 'Line',0 |> Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive |> Capture exclusive group: 0 |> Playback channels: Front Left - Front Right |> Capture channels: Front Left - Front Right |> Limits: Playback 0 - 31 |> Front Left: Playback 31 [100%] [on] Capture [off] |> Front Right: Playback 31 [100%] [on] Capture [off] |>Simple mixer control 'CD',0 |> Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive |> Capture exclusive group: 0 |> Playback channels: Front Left - Front Right |> Capture channels: Front Left - Front Right |> Limits: Playback 0 - 31 |> Front Left: Playback 31 [100%] [on] Capture [off] |> Front Right: Playback 31 [100%] [on] Capture [off] |>Simple mixer control 'Mic',0 |> Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive |> Capture exclusive group: 0 |> Playback channels: Mono |> Capture channels: Front Left - Front Right |> Limits: Playback 0 - 31 |> Mono: Playback 31 [100%] [on] |> Front Left: Capture [on] |> Front Right: Capture [on] |>Simple mixer control 'Mic Boost (+20dB)',0 |> Capabilities: pswitch pswitch-joined |> Playback channels: Mono |> Mono: Playback [on] |>Simple mixer control 'Mic Select',0 |> Capabilities: |> Mono: |>Simple mixer control 'Video',0 |> Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive |> Capture exclusive group: 0 |> Playback channels: Front Left - Front Right |> Capture channels: Front Left - Front Right |> Limits: Playback 0 - 31 |> Front Left: Playback 0 [0%] [off] Capture [off] |> Front Right
iodbc with mysql DSN error
Hi List! I have to connect with iodbc to mysql-4 server. I tried all the setting I can imagine and I get always "No DSN entered" error. = 1: SQLDriverConnect = [MySQL][ODBC 3.51 Driver]No DSN entered (516) SQLSTATE=HY000 1: ODBC_Connect = [MySQL][ODBC 3.51 Driver]No DSN entered (516) SQLSTATE=HY000 = I would be really thankful for any help especially configfiles what are really working. I use Sarge, all the packages are the official ones. I installed libiodbc2, iodbc libmysqlclient 10,12,14 libmyodbc mysql-client-4.1 mysql-common-4.1 myqsl-navigator mysql-query-browser, mysql-query-browser-common mysql-server-4.1 Thanks for your help Akos -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re:Configuring X on Intel 82845 gl board
> > >I assume the "1.0.0.0" is what your system believes the IP address to > > >be for debian.org. If so, then something's seriously hosed with your > > >DNS lookups. > > >It's quite possible there's another problem with apt; it does seem odd >that your network would work properly except when it comes time to use apt. > >I think I'd try a different mirror, perhaps one closer to home. You can >find a list of mirrors for stable here: >http://www.debian.org/CD/http-ftp/ (and many of these will probably work >for testing also). It may be that you're just having trouble reliably >getting to debian.org from New Delhi. I see similar problems when my >local ISP is congested (university, when the students are out of class >and downloading the latest goodies, etc). Hi, as suggested by you all I have upgraded my system to bf24 and now am able to get a so so X. The X throughput is still not great. But the 2 problems still come to haunt me time and again 1) I still cant install the intel dri driver package The Xfree86 is ginie:/home/shatam# XFree86 -version This is a pre-release version of XFree86, and is not supported in any way. Bugs may be reported to XFree86@XFree86.Org and patches submitted to [EMAIL PROTECTED] Before reporting bugs in pre-release versions, please check the latest version in the XFree86 CVS repository (http://www.XFree86.Org/cvs) XFree86 Version 4.1.0.1 / X Window System (protocol Version 11, revision 0, vendor release 6510) Release Date: 21 December 2001 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (See http://www.XFree86.Org/FAQ) Build Operating System: Linux 2.4.17 i686 [ELF] Module Loader present and my lsmod is --- ginie:/home/shatam# lsmod Module Size Used by Not tainted nls_cp437 4384 2 (autoclean) keybdev 1664 0 (unused) usbkbd 2848 0 (unused) input 3072 0 [keybdev usbkbd] usb-uhci 20708 0 (unused) usbcore 48032 0 [usbkbd usb-uhci] 2) I still cant apt-get update (the same problem i.e. (1.0.0.0) hang persists.) I suspect the route output will give you a clue --- ginie:/home/shatam# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0 Just to rebrief I am using a DSL router (192.168.1.1) and an ethernet card whose ifconfig shows --- ginie:/home/shatam# ifconfig eth0 Link encap:Ethernet HWaddr 00:08:A1:32:E1:7E inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:3252 errors:0 dropped:0 overruns:0 frame:0 TX packets:3406 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:2884677 (2.7 MiB) TX bytes:580437 (566.8 KiB) Interrupt:18 Base address:0xac00 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:388 errors:0 dropped:0 overruns:0 frame:0 TX packets:388 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:19848 (19.3 KiB) TX bytes:19848 (19.3 KiB) Please help Shatam Bhattacharya
Re: CPU's and system monitor
On 08:45, Wed 18 May 05, John Moran wrote: > Gnu-Raiz wrote: > > >On 19:14, Tue 17 May 05, John T. Moran wrote: > > > > > >>I installed Debian sarge today and the install went good. I couldn't get > >>the system to boot with the 2.6.8 smp kernel so I changed the repository > >>to unstable and installed the 2.6.11.1 kernel. Everything went fine and > >>no problems. System shows no bad behaviour. The one thing I noticed is > >>the System monitor is only showing one cpu. I have an Intel d865gbf > >>board with a 3.0 HT P4. I also have an Ubuntu 5.04 install on another > >>hard drive and it shows 2 cpu's. > >> > >>I checked the /proc/cpuinfo file and it is listing a cpu0 and cpu1. > >> > >>Any help with why System monitor would only show one cpu and any oher > >>ways to check if the HT is being used correctly? Thanks. > >> > >>John > >> > >> > > >One of the first things I would check is top, see if > > > >see's two cpu's. I would also check dmesg see if it lists > >two cpu's, I do not know how it lists a logical cpu, but I > >am sure google can find it out for you. > > > >I know many moons ago when I tried the installer on sarge it > >only seen one cpu, seems that they do not include an smp > >aware kernel with the installer, that might of changed a > >while ago. If that is the case just make your own, or > >download a smp aware kernel with apt-get. That was with dual > >amd MP cpus, was many moons ago, probably going on a good > >nine months. > > > >You just might want to keep it to one cpu as HyperThreading > >has a security bulletin against it, found in the BSD's > >probably effects all OS's. Check the news its all over the > >web if you want to find out more. > > > >Gnu-Raiz > > > > > > > > > top only sees one cpu. Haven't tried dmesg. Will try when I get to the > machine again. > > The installer finds (I guess) a HT cpu because it lists as a choice the > 2.6.8 smp kernel. When I try to use that kernel, the machine fails to > boot, so I choose 2.6.8 and it boots fine. Then I download and install > the 2.6.11-1 kernel. It boots up fine but system monitor does not see 2 > cpu's. Other than that, the system seems fine. > > The exact same system running Ubuntu with kernel 2.6.10-7 smp sees the > dual (HT) cpu's. I've also had FC3 installed and it sees the HT cpu as 2 > cpu's. > > Seems the two smp kernels I've tried with debian both display their own > set of problems that I don't see with other distros or other distros > based on debian. > > John Why not just use the kernel config from the Ubuntu kernel, or compare the two kernels configs, seems that maybe Debian has something left out of the config. Could very well be a bug you might want to file a bug report against that kernel version. Gnu-Raiz -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: About Sarge's bootup
Incoming from Ritesh Raj Sarraf: > Lee Braiden wrote: > > > On Monday 16 May 2005 11:02, Carl Fink wrote: > >> Why is it a "problem" and why do you want to stop it? It isn't hurting > >> anything. > > > > I consider this to be "broken" too. It slows down the boot process, and > > the messages are misleading, giving the impression that something is going > > wrong. I haven't got around to removing it from my laptop yet, but on > > another machine I just installed, I'm just skipping the whole hotplug > > thing and loading what I need manually. > > > > No, its not broken. There are a certain modules which get loaded by default > from /etc/modules. Then later when hotplug starts up its hardware probe it .^^^ > tries to load the corresponding module, but finds that its already loaded ..^^ You don't consider that an error? Shouldn't hotplug see if there's anything to do before bulling ahead and doing it? A simple grep of /etc/modules would create an exclude list. > and print that message. If you don't want that message, don't allow the > kernel to load that particular module. > > Its working as designed. Sure. Is the design correct? :-) Better yet, this should be classed as an implementation, not design, issue. The design isn't changed by adding that sanity check to hotplug. -- Any technology distinguishable from magic is insufficiently advanced. (*)http://www.spots.ab.ca/~keeling Please don't Cc: me. - - -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: friendly scp (help)
On Mon, May 16, 2005 at 06:29:45PM +0200, mess-mate wrote: > Lasse Pommerenke <[EMAIL PROTECTED]> wrote: > | > I'm looking for a "file manager" like mc, but for scp connections. > | > | Tux Commander looks like mc and supports scp connections. > | > Where can we get it ? > The *.deb package from tux commander didn't install ( is not a deb > file) > And the tar.bz2 file wouldn't open. > Sounds like you had bad downloads. Perhaps you clicked "Save As" on the links and got *.htm files instead of the .deb and .tar.bz2? Have you tried "file" on the files you downloaded? I downloaded the deb, was able to open it in mc and installed it. (I used the Kent mirror, if that makes a difference). I haven't tried the scp feature yet. -- Test-tube babies shouldn't throw stones. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
k3b screwing up cdrecord, [was: cdrecord failiure with kernel 2.6.8-2-686]
Hi list, I just posted concerning cdrecord problems, wich I got help solving. Still, solving one made me discover another problem. Using cdrecord from commandline, I can burn cd's untill I have tried to open k3b once. The k3b-splashimage hangs on 'Searching for devices'. If I try 'cdrecord -scanbus dev=ATAPI' or any other cdrecord option the terminal window hangs and cdrecord can not find the devices. The problem seems to be isolated on k3b, but how??? Now that I know cdrecord works well, I find this very strange. Kernel 2.6.8-2-686, debian sarge Does anybody have any clue? Cheers Vegard
Re: cdrecord failiure with kernel 2.6.8-2-686
On 5/18/05, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: > Rodney D. Myers wrote: > > >On Wed, 18 May 2005 18:10:13 +0200 > >Vegard|drageV <[EMAIL PROTECTED]> wrote: > > > > > > > >>cdrecord will not burn cd's after I changed to kernel 2.6.8-2-686, > >>with the following result to burn an image: > >> > >> > >> > > > >If I'm not mistaken, doesn't the 2.6.8.* kernel have a known bug not > >allowing non-root accounts to burn cdroms? This bug has been fixed, I've been told. Besides that shouldn't matter here, caus' I have the same problemes as root as well as normal user. > Remove in /etc/modules: > ide-scsi This was removed already... > and use ATA: > cdrecord -v speed=2 dev=ATA:0,0,0 --blank=fast > cdrecord -v speed=2 dev=ATA:0,0,0 -sao /downloads/image1.iso > ATA didn't work for me, but but ATAPI did: cdrecord -v speed=4 dev=ATAPI:0,1,0 image.iso Thanks for the good tip, I can now burn using cdrecord from commandline. > good luck. Cheers, Vegard
Re: About Sarge's bootup
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Lee Braiden wrote: > On Monday 16 May 2005 11:02, Carl Fink wrote: >> Why is it a "problem" and why do you want to stop it? It isn't hurting >> anything. > > I consider this to be "broken" too. It slows down the boot process, and > the messages are misleading, giving the impression that something is going > wrong. I haven't got around to removing it from my laptop yet, but on > another machine I just installed, I'm just skipping the whole hotplug > thing and loading what I need manually. > No, its not broken. There are a certain modules which get loaded by default from /etc/modules. Then later when hotplug starts up its hardware probe it tries to load the corresponding module, but finds that its already loaded and print that message. If you don't want that message, don't allow the kernel to load that particular module. Its working as designed. rrs - -- Ritesh Raj Sarraf RESEARCHUT -- http://www.researchut.com Gnupg Key ID: 04F130BC "Stealing logic from one person is plagiarism, stealing from many is research." "Necessity is the mother of invention." -BEGIN PGP SIGNATURE- Version: GnuPG v1.2.5 (GNU/Linux) iD8DBQFCi3Wi4Rhi6gTxMLwRAhEOAJ9C2xho0uILIhbc+NgRCoeawHTyFACgj5qN cP1ksgzFTq6Mh/vG0Wk0GL4= =qdl8 -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: mysql access setup
stan a écrit : I need to make mysql accessable from all machines on my network. How do I do this under Debian? Curently if I just do "mysql" on the machine I've installed it on, I get connected, but if I do "mysql -h foo" even on foo, I get: ERROR 1045: Access denied for user: '[EMAIL PROTECTED]' (Using password: NO) What do I need to do to fix this? I remember that, by default, mysqld only listens to the loopback address : you have to enable listening to other ifaces in the configuration file "disabled fo security reasons" Stop me if i'm wrong Jérôme -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Is 64MB enough?
On Mon, May 09, 2005 at 01:21:03PM +, John Moore wrote: | Thanks. The primary purpose is to study and understand Linux and the | programming environment. I'd also like to install Apache and Tomcat and do | some Java programming For Java work, I recommend using eclipse. You can use eclipse on windows as well. | (again, just experimental stuff - nothing commercial | grade). I'll definitely need to run a browser and an email client. The | ability to run (Star/Open)Office would be nice. I used to use a PII with 64MB RAM. I ran GNOME and everything on it. That was about 5-7 years ago. It will still work, but it will feel very sluggish. -D -- If you want to know what God thinks about money, just look at the people He gives it to. -- Old Irish Saying www: http://dman13.dyndns.org/~dman/jabber: [EMAIL PROTECTED] signature.asc Description: Digital signature
Re: An EXCELLENT Microsoft ... MS is in trouble from OpenSource OSes like Linux
On Sat, May 14, 2005 at 08:02:21PM -0500, Ron Johnson wrote: | On Sat, 2005-05-14 at 19:49 +, Stephen Patterson wrote: | > Jude DaShiell wrote: | > > I hope you're writing about an excellent Microsoft heavy duty Shop Vac, | > > because otherwise excellent and Microsoft never get that close in | > > reality otherwise. | > | > ... and I thought MS products would stop sucking as soon as they started | > making vacuums. | | Is that a reference only us greybeards would understand? ;) It's a play on the word "suck". If software sucks, its bad. If a vacuum sucks, it is working. -D -- "Piracy is not a technological issue. It's a behavior issue." --Steve Jobs www: http://dman13.dyndns.org/~dman/jabber: [EMAIL PROTECTED] signature.asc Description: Digital signature
Re: cdrecord failiure with kernel 2.6.8-2-686
On Wed, 18 May 2005, Vegard|drageV wrote: > cdrecord will not burn cd's after I changed to kernel 2.6.8-2-686, > with the following result to burn an image: > > > # cdrecord -v KNOPPIX_V3.7-2004-12-08-EN.iso If it is an IDE drive try: cdrecord -v speed=8 dev=/dev/hdc KNOPPIX_V3.7-2004-12-08-EN.iso assuming it is /dev/hdc -ishwar -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Which JVM to install ?
On Wed, May 18, 2005 at 12:30:21PM -0400, Roberto C. Sanchez wrote: > > Depends on what for. If you wan the best possible compatibility, get a Sun > or IBM JVM and then use the make-jpkg command (in the java-package package) > to create a .deb file that you can install on your system. Thanks for the suggestion, Roberto. I'll try Sun's, following your instructions. Paulo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: debian sarge kernel question
monky wrote: hello,everybody i download debian sarge Disk 1 from internet and install it. everything is successful.but i download other software in my computer. when i compile there softwares,the system promt me "your must have kernel header file". i run 'uname -r' at my computer,i get some message "2.6.8-1-686".i install debian sarge with linux26 and default settings.but sarge Disk 1 have not the kernel source code,so i use apt-get download a kernel source ball and uncompress it in /usr/src.some question here,when i run ' apt-cache search kernel|grep 2.6.8|grep ^k|grep source',i get following messages: kernel-patch-2.6.8-hppa - Diffs to the kernel source for HP PA-RISC (2.6) kernel-patch-2.6.8-m68k - Diffs to the kernel source for m68k kernel-patch-2.6.8-s390 - Diffs to the Linux kernel source 2.6.8 for IBM S/390 and zSeries kernel-source-2.6.8 - Linux kernel source for version 2.6.8 with Debian patches kernel-tree-2.6.8 - Linux kernel source tree for building Debian kernel images just you see,there have not about "2.6.8-1-686" recordes. so i can not compile my application which require kernel header file util i recompile my linux kernel with new kernel(kernel-source-2.6.8). who can tell me why the debian sarge default install and the system kernel is 2.6.8-1-686(or 386),but have not fit kernel source code??? because it, i must compile my kernel tow times (install and recompile),i'am not understander why it??? sorry for my pool english:) When I installed Sarge, I got a 2.6.8-2-686... There's no problem with this package : I've just made an apt-get install kernel-header-2.6.8-2-686 and everything went on without problem... Perhaps you should upgrade your kernel version ? Romain Lorquet -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Which JVM to install ?
Quoting Paulo Marcel Coelho Aragão <[EMAIL PROTECTED]>: I need to have a JVM installed but I'm not sure which one to use. Could somebody share some recommendation ? Thanks a lot Paulo Depends on what for. If you wan the best possible compatibility, get a Sun or IBM JVM and then use the make-jpkg command (in the java-package package) to create a .deb file that you can install on your system. -Roberto -- Roberto C. Sanchez http://familiasanchez.net/~sanchezr
Which JVM to install ?
I need to have a JVM installed but I'm not sure which one to use. Could somebody share some recommendation ? Thanks a lot Paulo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: cdrecord failiure with kernel 2.6.8-2-686
Rodney D. Myers wrote: On Wed, 18 May 2005 18:10:13 +0200 Vegard|drageV <[EMAIL PROTECTED]> wrote: cdrecord will not burn cd's after I changed to kernel 2.6.8-2-686, with the following result to burn an image: If I'm not mistaken, doesn't the 2.6.8.* kernel have a known bug not allowing non-root accounts to burn cdroms? Remove in /etc/modules: ide-scsi and use ATA: cdrecord -v speed=2 dev=ATA:0,0,0 --blank=fast cdrecord -v speed=2 dev=ATA:0,0,0 -sao /downloads/image1.iso good luck. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Most competent chemestry lab accept our pharmacy for US market.
Our generic medications are manufactured on government certified facilities and meet or exceed the highest US and international Food and Drug Administration standards. Its safe for humans!!! http://www.nebelanga.com/20023/Alexia Nothing will ever be attempted if all possible objections must first be overcome. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: cdrecord failiure with kernel 2.6.8-2-686
On Wed, 18 May 2005 18:10:13 +0200 Vegard|drageV <[EMAIL PROTECTED]> wrote: > cdrecord will not burn cd's after I changed to kernel 2.6.8-2-686, > with the following result to burn an image: > If I'm not mistaken, doesn't the 2.6.8.* kernel have a known bug not allowing non-root accounts to burn cdroms? -- Rodney D. Myers <[EMAIL PROTECTED]> Registered Linux User #96112 ICQ#: AIM#: YAHOO: 18002350 mailman452 mailman42_5 They that can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety. Ben Franklin - 1759 pgpZDMtqUNVNd.pgp Description: PGP signature
cdrecord failiure with kernel 2.6.8-2-686
cdrecord will not burn cd's after I changed to kernel 2.6.8-2-686, with the following result to burn an image: # cdrecord -v KNOPPIX_V3.7-2004-12-08-EN.iso cdrecord: No write mode specified. cdrecord: Asuming -tao mode. cdrecord: Future versions of cdrecord may have different drive dependent defaults. cdrecord: Continuing in 5 seconds... Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord and thus may have bugs that are not present in the original version. Please send bug reports and support requests to <[EMAIL PROTECTED]>. The original author should not be bothered with problems of this version. cdrecord: Warning: Running on Linux-2.6.8-2-686 cdrecord: There are unsettled issues with Linux-2.5 and newer. cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. cdrecord: Warning: Linux-2.6.8 introduced incompatible interface changes. cdrecord: Warning: SCSI transport does no longer work for suid root programs. cdrecord: Warning: if cdrecord fails, try to run it from a root account. TOC Type: 1 = CD-ROM scsidev: '0,1,0' scsibus: 0 target: 1 lun: 0 cdrecord: No such file or directory. Cannot open '/dev/pg1'. Cannot open SCSI driver. cdrecord: For possible targets try 'cdrecord -scanbus'. cdrecord: For possible transport specifiers try 'cdrecord dev=help'. cdrecord: cdrecord: For more information, install the cdrtools-doc cdrecord: package and read /usr/share/doc/cdrecord/README.ATAPI.setup . # cdrecord -scanbus gives me this result, only if I have not tried to start k3b since last reboot: # cdrecord -scanbus dev=ATAPI Cdrecord-Clone 2.01.01a01 (i686-pc-linux-gnu) Copyright (C) 1995-2004 Joerg Schilling NOTE: this version of cdrecord is an inofficial (modified) release of cdrecord and thus may have bugs that are not present in the original version. Please send bug reports and support requests to <[EMAIL PROTECTED]>. The original author should not be bothered with problems of this version. cdrecord: Warning: Running on Linux-2.6.8-2-686 cdrecord: There are unsettled issues with Linux-2.5 and newer. cdrecord: If you have unexpected problems, please try Linux-2.4 or Solaris. cdrecord: Warning: Linux-2.6.8 introduced incompatible interface changes. cdrecord: Warning: SCSI transport does no longer work for suid root programs. cdrecord: Warning: if cdrecord fails, try to run it from a root account. scsidev: 'ATAPI' devname: 'ATAPI' scsibus: -2 target: -2 lun: -2 Warning: Using ATA Packet interface. Warning: The related Linux kernel interface code seems to be unmaintained. Warning: There is absolutely NO DMA, operations thus are slow. Using libscg version 'ubuntu-0.8ubuntu1'. cdrecord: Warning: using inofficial version of libscg (ubuntu-0.8ubuntu1 '@(#)scsitransp.c 1.91 04/06/17 Copyright 1988,1995,2000-2004 J. Schilling'). scsibus0: cdrecord: Warning: controller returns wrong size for CD capabilities page. 0,0,0 0) 'SONY' 'CDU5211 ' 'YYS2' Removable CD-ROM 0,1,0 1) 'LITE-ON ' 'LTR-48126S ' '2QS5' Removable CD-ROM 0,2,0 2) * 0,3,0 3) * 0,4,0 4) * 0,5,0 5) * 0,6,0 6) * 0,7,0 7) * # Well, as you see I can not burn cd's at the moment with kernel 2.6.8-2-686, wich went ok (having some small problems) with kernel 2.4.27-1-386... Googling this didn't help. Does anyone have an idea? Cheers, Vegard
rsync bug with symlinks ?
I have two machines in the LAN running Sarge, and I want to rsync (mirror) specific directories from one to another, let say from pc1 -> pc2 On pc2 I have rsync running as server and the rsyncd.conf contains an alias : [ALL] path = / (there is a reason why I have all of the filesystem as alias.) On pc1 I'm running something like : rsync -azu -v /etc.pc2/ pc2::ALL/etc.pc2/ Unfortunately this breaks specific symlinks, like : /etc.pc2/X11/X -> usr/bin/X11/XFree86 instead of the correct /usr/bin/X11/XFree86. Also the same is happening with relative symlinks, like : /etc.pc2/myrelative -> ../usr/local/etc/myrelative becomes /etc.pc2/myrelative -> usr/local/etc/myrelative I have tried -R , -L , and --copy-unsafe-links without any result. What I'm missing ? TIA -- iik1 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Problem after removing old kernel packages
starmoon wrote: > Alexander Toresson wrote: > > I removed the older kernel-image-* packages I had today, and kept only > > 2.6.8-2-686. > > However, when I restarted, it seems like there's a big problem related > > to the modules. > > The sound card module (cs4232) ain't loaded, and if I try to modprobe > > it, I get an error saying it's not found. The same is true for the usb > > modules, network card etc, except a few of them, like ext3, ext2, > > ide_disk, vesafb, font, piix etc. > > > > I also tried to mount the floppy drive, to write the dmesg to a > > floppy, but mount /dev/fd0 complains that /dev/fd0 isn't a block > > device. So I have no way of attaching a dmesg to this message, both > > network and floppy drive is defunct. > > > > When it tries to start X, it stands there switching between black > > screen and console view a few times, then I'm able to log in normally > > to the console. > > > > I've considered doing a complete reinstall, however, I would need to > > take backup. > > > Try dpkg-reconfigure kernel-image-*. If there is still the problem, I > recommend getting a new kernel-image. I tried that. Now when I boot I get: vesafb: Unknown symbol cfb_copyarea vesafb: Unknown symbol cfb_imageblit vesafb: Unknown symbol cfb_fillrect pivot_root: No such file or directory /sbin/init: 431: cannot open dev/console: No such file Kernel panic: Attempted to kill init! Well, disaster. I guess I have to do a reinstall. I can use a live cd to look at and change files, so if anybody has any idea of why this may have happened and where to look on the hd, please reply. IMO things like this shouldn't happen (so it may be a bug somewhere). Regards, Alexander Toresson
debian sarge kernel question
hello,everybody i download debian sarge Disk 1 from internet and install it. everything is successful.but i download other software in my computer. when i compile there softwares,the system promt me "your must have kernel header file". i run 'uname -r' at my computer,i get some message "2.6.8-1-686".i install debian sarge with linux26 and default settings.but sarge Disk 1 have not the kernel source code,so i use apt-get download a kernel source ball and uncompress it in /usr/src.some question here,when i run ' apt-cache search kernel|grep 2.6.8|grep ^k|grep source',i get following messages: kernel-patch-2.6.8-hppa - Diffs to the kernel source for HP PA-RISC (2.6) kernel-patch-2.6.8-m68k - Diffs to the kernel source for m68k kernel-patch-2.6.8-s390 - Diffs to the Linux kernel source 2.6.8 for IBM S/390 and zSeries kernel-source-2.6.8 - Linux kernel source for version 2.6.8 with Debian patches kernel-tree-2.6.8 - Linux kernel source tree for building Debian kernel images just you see,there have not about "2.6.8-1-686" recordes. so i can not compile my application which require kernel header file util i recompile my linux kernel with new kernel(kernel-source-2.6.8). who can tell me why the debian sarge default install and the system kernel is 2.6.8-1-686(or 386),but have not fit kernel source code??? because it, i must compile my kernel tow times (install and recompile),i'am not understander why it??? sorry for my pool english:) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: gnome-applet
Frederico Rodrigues Abraham wrote: > http://sensors-applet.sourceforge.net/ > > how do i build a .deb package for this? will it be compatible with the > gnome in sarge? > why isn't it in the testing distribution... it's so useful... There is an GNOME applet with similar functions, called hardware-monitor. http://packages.debian.org/testing/gnome/hardware-monitor -- Cheers, Sven Arvidsson http://www.whiz.se PGP Key ID 760BDD22 signature.asc Description: Digital signature
Re: Recommended Debian book?
On 5/17/05, Kevin Mark <[EMAIL PROTECTED]> wrote: > On Mon, May 16, 2005 at 11:29:32PM -0400, Roberto C. Sanchez wrote: > > Deboo ^ wrote: > > > On 5/16/05, s. keeling <[EMAIL PROTECTED]> wrote: > > > > > >>Incoming from Deboo ^: > > >> > > >>>On 5/16/05, Roberto C. Sanchez <[EMAIL PROTECTED]> wrote: > > >>> > > Deboo ^ wrote: > > > > >What is a good book on debian for and intermediate users? > > > > Intermediate in what sense? Intermediate software developer? > > Intermediate kernel hacker? Intermediate DB guru? > > >>> > > >>>Both, an intermediate linux user as well as for server administration > > >> > > >>http://www.debian.org/doc/manuals/reference/reference.en.html > > > > > > > > > Wow! A very nice reference guide, is it not available as a single > > > file, Can it be printed? > > > > > > Deboo > > > > > > > Do an 'aptitude install debian-reference' and then you can print > > /usr/share/doc/Debian/reference/reference.en.pdf.gz > Hi, > when I first started getting into Debian, I got this printed and > spiral-bound at my local Kinko's (us copy shop) as they can print > pdf files for about 15 USD, YMMV. It was worth it to have a printed > reference whenever I needed it. > Cheers, > Kev Thanks everyone. I now have a very nice collection of debian books and documents and have printed out some. I'll wait for the next edition of debian linux bible. A friend told me to chekout aboutdebian.com in the books section and there are some good references there I saw. Debian linux bible is mentioned there too. Regards, Deboo -- Please don't Cc: me, I'm subscribed to the list.
Re: .ch does not imply .ch does not imply .de (PASSWORD FOR DEBIAN CD TO INSTALL APLYCATIONS)
On Wed, May 18, 2005 at 02:27:41PM +0200, martin f krafft wrote: > also sprach Michelle Konzack <[EMAIL PROTECTED]> [2005.05.18.1353 +0200]: > > because you are from Swiss, I asume you speak german and it will > > be better to subscribe to > > Having a gmx.ch address does not imply that you one is Swiss (in > fact, if my last name was "Schweizer", I might get a gmx.ch address > even if I lived in Iceland), and being Swiss certainly does not > imply you speak German. ... Quite true. But it seems far more likely that that person can speak German than say, someone from a US based account. It's hard enough to get us speaking English properly, as is... ;-) Kenward -- In a completely rational society, the best of us would aspire to be _teachers_ and the rest of us would have to settle for something less, because passing civilization along from one generation to the next ought to be the highest honor and the highest responsibility anyone could have. - Lee Iacocca -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: udev how to set up automatic /media/cdrom0
On Mon, May 16, 2005 at 03:22:00PM -0400, Brad Sawatzky wrote: | On Mon, 16 May 2005, Mitchell Laks wrote: | | > On Monday 16 May 2005 08:49 am, LeVA wrote: | > | > > -> debian-user@lists.debian.org,: | > > > Hi, | > > > are there any knowledgeable users of udev who can tell us how to | > > > configure udev scripts to automatically create | > > > /media/cdrom0 and /media/cdrom1? | [ . . . ] | > However, that udev info document seems to be focused on the /dev/ devices, | > which makes sense. The crazy behavior that I and others have seen lately in | > debian is that the devices | > | > /media/cdrom0 and /media/cdrom1 disappear after we reboot. | > | > And I thought udev affects only /dev/ files??? | | udev handles devices (ie. special files in /dev). udev does not handle | mount-points (ie. directories) in /media/, /mount/, /mnt/... Correct. | Software like gnome-volume-manager (others?) will create/delete | mount-points in /media/ by parsing data from udev and hald. I use udev, but I don't use gnome-volume-manager or anything like that. I also don't have any problem with my mount points automagically disappearing on my. | I don't know if there is an official declaration somewhere, but I suspect | that /media/ is for auto-generated mount-points and good old /mnt/ is for | 'hand-made' ones. The official declaration is the FHS (Filesystem Hierarchy Statndard): http://www.pathname.com/fhs/ (the site appears to be down, but here is google's cache of the document: http://64.233.187.104/search?q=cache:pB4nw5faWhsJ:www.pathname.com/fhs/pub/fhs-2.3.pdf+fhs+filesystem+hierarchy+pdf+2.3+pathname.com&hl=en&client=firefox ) -D -- UNIX is basically a simple operating system, but you have to be a genius to understand the simplicity. -- Dennis Ritchie www: http://dman13.dyndns.org/~dman/jabber: [EMAIL PROTECTED] signature.asc Description: Digital signature
Re: Problem after removing old kernel packages
Alexander Toresson wrote: I removed the older kernel-image-* packages I had today, and kept only 2.6.8-2-686. However, when I restarted, it seems like there's a big problem related to the modules. The sound card module (cs4232) ain't loaded, and if I try to modprobe it, I get an error saying it's not found. The same is true for the usb modules, network card etc, except a few of them, like ext3, ext2, ide_disk, vesafb, font, piix etc. I also tried to mount the floppy drive, to write the dmesg to a floppy, but mount /dev/fd0 complains that /dev/fd0 isn't a block device. So I have no way of attaching a dmesg to this message, both network and floppy drive is defunct. When it tries to start X, it stands there switching between black screen and console view a few times, then I'm able to log in normally to the console. I've considered doing a complete reinstall, however, I would need to take backup. Try dpkg-reconfigure kernel-image-*. If there is still the problem, I recommend getting a new kernel-image. Regards, Alexander Toresson -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
iPlanet 6.0 SP5 (Sun One) on debian sarge
I would like to get iplanet 6.0 sp5 running on Debian. I was just wondering if anyone had any good links or information on doing this. I tried google but didn't come up with anything good. Thanks, Keith. This message is the property of R/GA and contains information which may be privileged or confidential. It is meant only for the intended recipients and/or their authorized agents. If you believe you have received this message in error, please notify us immediately by return e-mail or by forwarding this message to [EMAIL PROTECTED], and destroy any printed or electronic copies of the message. Any unauthorized use, dissemination, disclosure, or copying of this message or the information contained in it, is strictly prohibited and may be unlawful. Thank you. This message is the property of R/GA and contains information which may be privileged or confidential. It is meant only for the intended recipients and/or their authorized agents. If you believe you have received this message in error, please notify us immediately by return e-mail or by forwarding this message to [EMAIL PROTECTED], and destroy any printed or electronic copies of the message. Any unauthorized use, dissemination, disclosure, or copying of this message or the information contained in it, is strictly prohibited and may be unlawful. Thank you. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
iptables and masquerading: how to allow vpnc from lan
Hi,
I am running an old computer as a router using Debian Sarge and kernel
2.6.10 kernel and iptables 1.2.11-10. Here is my setup:
CompR
,---.
(INTERNET) -->ppp0--->eth1eth0 >SWITCH--->192.168.0.0/24
`---'
CompR(which contains eth0 and eth1) is the router computer (doing NAT or
IP masquerading) running iptables and doing masquerading. ppp0, the ADSL
modem, has my external internet address given by my ISP. eth1 is
192.168.2.10 and eth0 is 192.168.0.1. My LAN is 192.168.0.0/16.
Before I set up this computer I had a D-Link router in its place with
the option of VPN enabled. At that time, a Windows machine in my LAN was
able to connect to an external VPN server(at my university) using a VPN
client (Cisco's) and was able to sustain the connection.
After I set up my router computer(and removed D-Link router), the
Windows client can connect to the external VPN server but cannot sustain
the connection. The connection seems to be breaking multiple times every
hour. I have been trying various rules (searched from google) and have
this stanza relating to this in CompR's iptables rules set:
# --- IN ---
for VPNS in $VPN_SERVERS; do
$IPTABLES -A INPUT -p udp -s $VPNS \
-i $EXTIF --dport 500 -j ACCEPT
done
# --- OUT ---
for VPNS in $VPN_SERVERS; do
$IPTABLES -A OUTPUT -p udp -d $VPNS \
-o $EXTIF --dport 500 -j ACCEPT
done
$IPTABLES -A FORWARD -i ${EXTIF} -p tcp --dport 500 -j ACCEPT
$IPTABLES -A FORWARD -i ${EXTIF} -p udp --dport 500 -j ACCEPT
$IPTABLES -t nat -A PREROUTING -p udp -i ${EXTIF} \
--dport 500 -j DNAT --to-destination 192.168.0.15:500
After the Windows client (192.168.0.15) connects, I do not see any
traffic any 500 port when I use "iptables -nvL" command to see what is
going on in CompR. Looks like none of the above rules is accepting any
packets at all.
What am I doing wrong here? I have never dealt with this, VPN, situation
before. Do I need to open other ports or allow other protocals? If
somebody could shed some light on this, it would be great.
thanks,
->HS
--
Please remove the underscores ( the '_' symbols) from my email address
to obtain the correct one. Apologies, but the fudging is to remove spam.
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: Getting a Dinamic Remote IP
Sven Arvidsson wrote: Romulo Sousa wrote: I would like to get an remote IP. It's about my girlfriend's computer where I share some directories and install some packages. The problem is that all the time I need to connect via ssh into her computer I must call her asking for its IP provided by her ISP throughout ifconfig output. What can I do in order to get the IP from her computer all the time the machine is booted? Is it possible to send a message by email, SMS or whatever way to do that? Further, her computer is connected by a ADSL (dinamic) and my computer uses cable modem (dinamic also). The best way to solve the problem is that she have a dynamic dns. There are many websites supply free dynamic dns. You can find and register one. And then install the client application on the computer in order to refresh the ip address when she dial up. So you just only keep the domain in mind. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
gnome-applet
http://sensors-applet.sourceforge.net/ how do i build a .deb package for this? will it be compatible with the gnome in sarge? why isn't it in the testing distribution... it's so useful... thanks -- Fred -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Warning: Missing charsets in String to FontSet conversion
hi i upgraded from woody to sarge and after the upgrade xfig, galeon, and other applications seem to have problems with the fonts: [EMAIL PROTECTED]:~/Sspe_paper/figures$ xfig Warning: Missing charsets in String to FontSet conversion Warning: Cannot convert string "-*-times-medium-r-normal--16-*-*-*-*-*-*-*,-*-*-medium-r-normal--16-*-*-*-*-*-*-*,*--16-*" to type FontSet Warning: Missing charsets in String to FontSet conversion Warning: Cannot convert string "-*-times-medium-r-normal--16-*-*-*-*-*-*-*,-*-*-medium-r-normal--16-*-*-*-*-*-*-*,-*-*-*-r-*--16-*-*-*-*-*-*-*" to type FontSet Warning: Missing charsets in String to FontSet conversion Warning: Cannot convert string "-*-times-bold-r-normal--16-*-*-*-*-*-*-*,-*-*-bold-r-normal--16-*-*-*-*-*-*-*,-*-*-*-r-*--16-*-*-*-*-*-*-*" to type FontSet how do i resolve this? best regards martin -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Problem after removing old kernel packages
I removed the older kernel-image-* packages I had today, and kept only 2.6.8-2-686. However, when I restarted, it seems like there's a big problem related to the modules. The sound card module (cs4232) ain't loaded, and if I try to modprobe it, I get an error saying it's not found. The same is true for the usb modules, network card etc, except a few of them, like ext3, ext2, ide_disk, vesafb, font, piix etc. I also tried to mount the floppy drive, to write the dmesg to a floppy, but mount /dev/fd0 complains that /dev/fd0 isn't a block device. So I have no way of attaching a dmesg to this message, both network and floppy drive is defunct. When it tries to start X, it stands there switching between black screen and console view a few times, then I'm able to log in normally to the console. I've considered doing a complete reinstall, however, I would need to take backup. Regards, Alexander Toresson
netinstall using sagem fast 800 usb modem
Can anyone help me? I want to install debian using the netinstall cd. Is this possible using an adsl usb modem (sagem fast 800)? I would appreciate any details as I am a newbie thanks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: samba server
Hi and thx for ur response, i changed the name of my admin in all configurations files. I referred him to as root. I added root as a pozixAccount. Here is my result : sambaLMPassword F0D412BD764FFE81AAD3B435B51404EE sambaPrimaryGroupSIDS-1-5-21-634357371-4061345844-4009714039-513 displayName System User sambaLogonScriptroot.cmd objectClass top objectClass inetOrgPerson objectClass posixAccount objectClass shadowAccount objectClass sambaSamAccount userPassword[EMAIL PROTECTED] sambaHomeDrive H: sambaLogonTime 0 uid root uidNumber 1041 cn root sambaLogoffTime 2147483647 sambaPwdLastSet 1116359748 sambaAcctFlags [U] loginShell /bin/bash gidNumber 513 sambaPwdMustChange 1124913348 sambaNTPassword 209C6174DA490CAEB422F3FA5A7AE634 sambaPwdCanChange 0 gecos System User sambaSIDS-1-5-21-634357371-4061345844-4009714039-3082 description System User homeDirectory /home/root sambaKickoffTime2147483647 sn root Then NSS must, as u told me, search this posix account for joining the domain samba. Another thing : i got a problem joining my windows com to the LDAP : smbldap-useradd test5$ pdbedit -a -m -u test5$ says that the account cannot be found cause the sambaSID is missing... Perhaps that's why i cannot join the samba domain too ! On 5/18/05, Mark Roach <[EMAIL PROTECTED]> wrote: > chuchyyy wrote: > > is there a relation between my problem and a configuration of > > common-auth in /etc/pam.d/, or common-passwd? > > Cause i did all advices that u told me but it doesnt work... > > Nope. PAM is for authentication. NSS is like DNS for user IDs > > > On 5/17/05, chuchyyy <[EMAIL PROTECTED]> wrote: > > > >>here is my ldif file : > >> > >>dn: cn=admin,dc=netc,dc=net > >>objectclass: sambaSamAccount > >>cn: admin > >>o: netc > >>uid : 0 > >>mail: [EMAIL PROTECTED] > >>sn: Administrateur > >> > >>then ldapadd. > > Ahh. This is not a posixAccount. NSS is going to be looking for > posixAccount objects. Here's an example of an account: > > dn: uid=Administrator,ou=People,dc=dev,dc=com > cn: Administrator > objectClass: inetOrgPerson > objectClass: sambaSamAccount > objectClass: posixAccount > objectClass: shadowAccount > gidNumber: 512 > uid: Administrator > uidNumber: 0 > homeDirectory: /home/Administrator > sambaLogonTime: 0 > sambaLogoffTime: 2147483647 > sambaKickoffTime: 2147483647 > sambaHomeDrive: H: > sambaPrimaryGroupSID: S-1-5-21-36851585-1427149615-4264512839-512 > sambaSID: S-1-5-21-36851585-1427149615-4264512839-2996 > loginShell: /bin/false > gecos: Netbios Domain Administrator > userPassword:: > sn: System Administrator > displayName: System admin > sambaPwdCanChange: 2004901635 > sambaPwdMustChange: 2147483647 > sambaLMPassword: > sambaNTPassword: > sambaPasswordHistory: > > > sambaPwdLastSet: 2004901635 > sambaAcctFlags: [U ] > > Keep in mind, there is no need for your Admin account to be your main > ldap admin account. I have never tried making that account into a > posix/samba user. > > -Mark >
Ardeen Burbidge
Andreatos Bernardina
Re: samba server
chuchyyy wrote: is there a relation between my problem and a configuration of common-auth in /etc/pam.d/, or common-passwd? Cause i did all advices that u told me but it doesnt work... Nope. PAM is for authentication. NSS is like DNS for user IDs On 5/17/05, chuchyyy <[EMAIL PROTECTED]> wrote: here is my ldif file : dn: cn=admin,dc=netc,dc=net objectclass: sambaSamAccount cn: admin o: netc uid : 0 mail: [EMAIL PROTECTED] sn: Administrateur then ldapadd. Ahh. This is not a posixAccount. NSS is going to be looking for posixAccount objects. Here's an example of an account: dn: uid=Administrator,ou=People,dc=dev,dc=com cn: Administrator objectClass: inetOrgPerson objectClass: sambaSamAccount objectClass: posixAccount objectClass: shadowAccount gidNumber: 512 uid: Administrator uidNumber: 0 homeDirectory: /home/Administrator sambaLogonTime: 0 sambaLogoffTime: 2147483647 sambaKickoffTime: 2147483647 sambaHomeDrive: H: sambaPrimaryGroupSID: S-1-5-21-36851585-1427149615-4264512839-512 sambaSID: S-1-5-21-36851585-1427149615-4264512839-2996 loginShell: /bin/false gecos: Netbios Domain Administrator userPassword:: sn: System Administrator displayName: System admin sambaPwdCanChange: 2004901635 sambaPwdMustChange: 2147483647 sambaLMPassword: sambaNTPassword: sambaPasswordHistory: sambaPwdLastSet: 2004901635 sambaAcctFlags: [U ] Keep in mind, there is no need for your Admin account to be your main ldap admin account. I have never tried making that account into a posix/samba user. -Mark -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: CPU's and system monitor
Gnu-Raiz wrote: On 19:14, Tue 17 May 05, John T. Moran wrote: I installed Debian sarge today and the install went good. I couldn't get the system to boot with the 2.6.8 smp kernel so I changed the repository to unstable and installed the 2.6.11.1 kernel. Everything went fine and no problems. System shows no bad behaviour. The one thing I noticed is the System monitor is only showing one cpu. I have an Intel d865gbf board with a 3.0 HT P4. I also have an Ubuntu 5.04 install on another hard drive and it shows 2 cpu's. I checked the /proc/cpuinfo file and it is listing a cpu0 and cpu1. Any help with why System monitor would only show one cpu and any oher ways to check if the HT is being used correctly? Thanks. John One of the first things I would check is top, see if it see's two cpu's. I would also check dmesg see if it lists two cpu's, I do not know how it lists a logical cpu, but I am sure google can find it out for you. I know many moons ago when I tried the installer on sarge it only seen one cpu, seems that they do not include an smp aware kernel with the installer, that might of changed a while ago. If that is the case just make your own, or download a smp aware kernel with apt-get. That was with dual amd MP cpus, was many moons ago, probably going on a good nine months. You just might want to keep it to one cpu as HyperThreading has a security bulletin against it, found in the BSD's probably effects all OS's. Check the news its all over the web if you want to find out more. Gnu-Raiz top only sees one cpu. Haven't tried dmesg. Will try when I get to the machine again. The installer finds (I guess) a HT cpu because it lists as a choice the 2.6.8 smp kernel. When I try to use that kernel, the machine fails to boot, so I choose 2.6.8 and it boots fine. Then I download and install the 2.6.11-1 kernel. It boots up fine but system monitor does not see 2 cpu's. Other than that, the system seems fine. The exact same system running Ubuntu with kernel 2.6.10-7 smp sees the dual (HT) cpu's. I've also had FC3 installed and it sees the HT cpu as 2 cpu's. Seems the two smp kernels I've tried with debian both display their own set of problems that I don't see with other distros or other distros based on debian. John -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: problem while installing vmware 5.0 on debian
Le mardi 17 mai 2005 à 18:57 -0400, Jason Wang a écrit : > hi, i'm trying to install vmware 5.0 on debian sarge.. and i can't get > it to work.. i first downloaded the vmware from the offical site (the > tar package), and started to install.. the install went fine, then i > patched vmware-any-any-update90.. then i ran vmware-config.pl, that's > when problem poped up, when it tries to compile my kernal-headers, it > gave me this error: > Your kernel was built with "gcc" version "3.3.5", while you are trying to use > "/usr/bin/gcc" version "3.3.6". This configuration is not recommended and > VMware > Workstation may crash if you'll continue. Please try to use exactly same > compiler as one used for building your kernel. Do you want to go with compiler > "/usr/bin/gcc" version "3.3.6" anyway? [no] y > > i answered y, and then in the end, it gave me this error: > What is the location of the directory of C header files that match your > running > kernel? [/usr/src/kernel-headers-2.6.10/include] Strange, I have this one : [/lib/modules/2.6.11-1-686-smp/build/include] (it matches a kernel from sid) you are running your privately compiled kernel ? have you tried with what's readily available from Debian ? Aurélien. Extreme fear can neither fight nor fly. -- William Shakespeare, "The Rape of Lucrece" ** This email and any files transmitted with it are confidential and intended solely for the use of the individual or entity to whom they are addressed. If you have received this email in error please notify the system manager. This footnote also confirms that this email message has been swept by MIMEsweeper for the presence of computer viruses. www.clearswift.com **
Re: samba server
is there a relation between my problem and a configuration of common-auth in /etc/pam.d/, or common-passwd? Cause i did all advices that u told me but it doesnt work... Thank you, Guillaume On 5/17/05, chuchyyy <[EMAIL PROTECTED]> wrote: > here is my ldif file : > > dn: cn=admin,dc=netc,dc=net > objectclass: sambaSamAccount > cn: admin > o: netc > uid : 0 > mail: [EMAIL PROTECTED] > sn: Administrateur > > then ldapadd. > "id admin" doesnt seem to work... My computer is in my LDAP yet. all > permissions are good. Even more than 644... > > thx for your patience, > > Guillaume > On 5/17/05, Mark Roach <[EMAIL PROTECTED]> wrote: > > chuchyyy wrote: > > > Yea that's right. But i can connect to the LDAP server with this > > > administrator. I can create account with smbldap-useradd -a. > > > How can i say to the LDAP server and Samba that the user is the > > > administrator to use for connect Windows to the domain? My > > > samba.schema is in my slapd.conf. > > > > The only way a user can add computer accounts to the domain is if that > > user's uidNumber=0. So it seems like there are two things you need to do: > > > > 1: Create a user account with uid: 0, objectClass: sambaSAMAccount > > 2: Ensure that that user is visible through 'id username' > > 3: Make sure that that account has permissions to write to the LDAP > > tree, (whoops that was three) > > > > There are a variety of reasons why your users are not showing up to the > > system. The main places to check though, are your /etc/libnss-ldap.conf > > and the slapd.conf permissions > > > > Assuming your ldap server is on the local machine, all libnss-ldap.conf > > needs to have in it is: > > host 127.0.0.1 > > base dc=yourdomain,dc=com > > ldap_version 3 > > > > also, make sure the permissions on libnss-ldap.conf are -rw-r--r-- > > > > -Mark > > >
Re: Please, stop mail massive
On Tue, 17 May 2005, ccastillo wrote: Friends of debian, my email is satured by your mail's massive. can you stop to send me massages? Unsubscribe then ... Thanks. Cristian Castillo. -- Open WebMail Project (http://openwebmail.org) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
.ch does not imply .ch does not imply .de (PASSWORD FOR DEBIAN CD TO INSTALL APLYCATIONS)
also sprach Michelle Konzack <[EMAIL PROTECTED]> [2005.05.18.1353 +0200]: > because you are from Swiss, I asume you speak german and it will > be better to subscribe to Having a gmx.ch address does not imply that you one is Swiss (in fact, if my last name was "Schweizer", I might get a gmx.ch address even if I lived in Iceland), and being Swiss certainly does not imply you speak German. -- Please do not send copies of list mail to me; I read the list! .''`. martin f. krafft <[EMAIL PROTECTED]> : :' :proud Debian developer, admin, user, and author `. `'` `- Debian - when you have better things to do than fixing a system Invalid/expired PGP subkeys? Use subkeys.pgp.net as keyserver! "i doubt larry wall ever uses strict." -- frederick heckel signature.asc Description: Digital signature
Re: Getting a Dinamic Remote IP
Romulo Sousa wrote: > I would like to get an remote IP. It's about my girlfriend's computer > where I share some directories and install some packages. The problem > is that all the time I need to connect via ssh into her computer I > must call her asking for its IP provided by her ISP throughout > ifconfig output. > What can I do in order to get the IP from her computer all the time > the machine is booted? Is it possible to send a message by email, SMS > or whatever way to do that? Further, her computer is connected by a > ADSL (dinamic) and my computer uses cable modem (dinamic also). There was a thread about a similar issue some time ago: http://lists.debian.org/debian-user/2005/03/msg00901.html -- Cheers, Sven Arvidsson http://www.whiz.se PGP Key ID 760BDD22 signature.asc Description: Digital signature
Re: problem with microphone and alsa -> no sound?
ok i have now gone over the reports in the mail achive and they seem to be concered with missing capture or mic level set to 0. however, i dont think that is the problem here, because according to the amixer dump i posted, that is not the case here: Simple mixer control 'Mic',0 Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-joined cswitch-exclusive Capture exclusive group: 0 Playback channels: Mono Capture channels: Front Left - Front Right Limits: Playback 0 - 31 Mono: Playback 31 [100%] [on] Front Left: Capture [on] Front Right: Capture [on] so any suggestions are indeed most welcome. best regards martin On Sat, May 14, 2005 at 08:48:41PM +0200, wrote: > hi > > > i cant get my microphone to work with alsa. i need help :o) > > > [EMAIL PROTECTED]:/home/maasha# dpkg -l |grep alsa > ii alsa-base 1.0.8-7ALSA driver configuration files > ii alsa-oss 1.0.8-1ALSA wrapper for OSS applications > ii alsa-utils 1.0.8-4ALSA utilities > rc alsaconf 0.4.3b-4 ALSA configurator > > [EMAIL PROTECTED]:/home/maasha# lspci | grep Multi > :00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) > AC'97 Audio Controller (rev 02) > :02:02.0 Multimedia controller: Philips Semiconductors SAA7134 (rev 01) > > [EMAIL PROTECTED]:/home/maasha# lsmod | grep snd > snd_pcm_oss53444 1 > snd_mixer_oss 19104 2 snd_pcm_oss > snd_intel8x0 32964 3 > snd_ac97_codec 58820 1 snd_intel8x0 > snd_pcm92992 2 snd_pcm_oss,snd_intel8x0 > snd_timer 25152 1 snd_pcm > snd_page_alloc 12324 2 snd_intel8x0,snd_pcm > snd_mpu401_uart 8608 1 snd_intel8x0 > snd_rawmidi24384 1 snd_mpu401_uart > snd_seq_device 9284 1 snd_rawmidi > snd55364 11 > snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device > soundcore 11136 4 saa7134,snd > > [EMAIL PROTECTED]:/home/maasha# amixer > Simple mixer control 'Master',0 > Capabilities: pvolume pswitch pswitch-joined > Playback channels: Front Left - Front Right > Limits: Playback 0 - 31 > Front Left: Playback 31 [100%] [on] > Front Right: Playback 31 [100%] [on] > Simple mixer control 'PCM',0 > Capabilities: pvolume pswitch pswitch-joined > Playback channels: Front Left - Front Right > Limits: Playback 0 - 31 > Front Left: Playback 31 [100%] [on] > Front Right: Playback 31 [100%] [on] > Simple mixer control 'Surround',0 > Capabilities: pvolume pswitch > Playback channels: Front Left - Front Right > Limits: Playback 0 - 31 > Front Left: Playback 0 [0%] [off] > Front Right: Playback 0 [0%] [off] > Simple mixer control 'Center',0 > Capabilities: pvolume pvolume-joined pswitch pswitch-joined > Playback channels: Mono > Limits: Playback 0 - 31 > Mono: Playback 31 [100%] [off] > Simple mixer control 'LFE',0 > Capabilities: pvolume pvolume-joined pswitch pswitch-joined > Playback channels: Mono > Limits: Playback 0 - 31 > Mono: Playback 0 [0%] [off] > Simple mixer control 'Line',0 > Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined > cswitch-exclusive > Capture exclusive group: 0 > Playback channels: Front Left - Front Right > Capture channels: Front Left - Front Right > Limits: Playback 0 - 31 > Front Left: Playback 31 [100%] [on] Capture [off] > Front Right: Playback 31 [100%] [on] Capture [off] > Simple mixer control 'CD',0 > Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined > cswitch-exclusive > Capture exclusive group: 0 > Playback channels: Front Left - Front Right > Capture channels: Front Left - Front Right > Limits: Playback 0 - 31 > Front Left: Playback 31 [100%] [on] Capture [off] > Front Right: Playback 31 [100%] [on] Capture [off] > Simple mixer control 'Mic',0 > Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch > cswitch-joined cswitch-exclusive > Capture exclusive group: 0 > Playback channels: Mono > Capture channels: Front Left - Front Right > Limits: Playback 0 - 31 > Mono: Playback 31 [100%] [on] > Front Left: Capture [on] > Front Right: Capture [on] > Simple mixer control 'Mic Boost (+20dB)',0 > Capabilities: pswitch pswitch-joined > Playback channels: Mono > Mono: Playback [on] > Simple mixer control 'Mic Select',0 > Capabilities: > Mono: > Simple mixer control 'Video',0 > Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-joined > cswitch-exclusive > Capture exclusive group: 0 > Playback channels: Front Left - Front Right > Capture channels: Front Left - Front Right > Limits: Playback 0 - 31 > Front Left: Playback 0 [0%] [off] Capture [off] > Front Right: Playback 0 [0%] [off] Capture [off] > Simple mixer control 'Phone',0 > Capabilities: cswitch cswitch-joined cswitch-exclusi
Re: PASSWORD FOR DEBIAN CD TO INSTALL APLYCATIONS
Hello Martin, because you are from Swiss, I asume you speak german and it will be better to subscribe to wiel Du aus der Schweiz bis, gehe ich davon aus, das Du deutsch sprichste, womit ich es für besser halte, wenn Du Dich auf an die wendest. Ich gehe mal davon aus, das Du das root-Password verloren hast. Ich kann Dir per PM helfen, mußt mich halt nur privat anmailen. Am 2005-05-18 11:08:44, schrieb M.Schweizer: > how i get Passwort to Install a Linux Aplication , for wine its not I think, he lost his root password. > Problem , him not ask for PSW . I install a passwort first and after i > call him in Install about him not fund again. I make Test again in Dos OK, lost. If he speaks german (hes from Suiss) I will try him privatly. > mode, its successfully install. > Way i not fund PSW now, in Installmode (Realplayer) I Make Exempel i > Install after Realplayer for Windows in Wine, him only Play him song if > you start him. I think, he should install RealPlayer for Linux, which works with Streaming from the Internet. > In Reality not Play my a ram file directly from Internet . In Suse 9.0 > its Works ,not problem. I install allredy with Yast or KDE > > martin Greetings Michelle -- Linux-User #280138 with the Linux Counter, http://counter.li.org/ Michelle Konzack Apt. 917 ICQ #328449886 50, rue de Soultz MSM LinuxMichi 0033/3/8845235667100 Strasbourg/France IRC #Debian (irc.icq.com) signature.pgp Description: Digital signature
Re: PASSWORD FOR DEBIAN CD TO INSTALL APLYCATIONS
On Wednesday 18 May 2005 11:46, Maurits van Rees wrote: > Or install the 'sux' package and use 'sux' instead of 'su'. Yes, much preferable if he can manage it. But I didn't want to confuse him with two installs and multiple password entries :) -- Lee. Please send replies to the list, not to my email address. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: PASSWORD FOR DEBIAN CD TO INSTALL APLYCATIONS
On Wed, May 18, 2005 at 11:34:32AM +0100, Lee Braiden wrote: > If you want to install things that need a GUI, you'll have to do > this next: export DISPLAY=:0 XAUTHORITY=~username/.Xauthority Or install the 'sux' package and use 'sux' instead of 'su'. -- Maurits van Rees | http://maurits.vanrees.org/ [Dutch/Nederlands] Public GnuPG key: keyserver.net ID 0x1735C5C2 "Let your advance worrying become advance thinking and planning." - Winston Churchill signature.asc Description: Digital signature
Re: Help with apt-move
> On Fri, May 13, 2005 at 08:36:03PM +0200, W. Borgert wrote: > > I'm using apt-move since some time without problems. > > Suddenly(?) the following error message appears: The problem has been solved: It was a consecutive fault of a DNS resolution problem. The funny thing is, that it worked before w/o problems - company LANs are an enigma! Many thanks anyway! Cheers, WB -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: PASSWORD FOR DEBIAN CD TO INSTALL APLYCATIONS
On Wednesday 18 May 2005 11:28, Lee Braiden wrote: > On Wednesday 18 May 2005 10:08, M.Schweizer wrote: > > how i get Passwort to Install a Linux Aplication > > In KDE, go to the menu. Then choose System->More Applications->Terminal > Program (super user mode). That will ask you for a password, then give you > a "root shell", which has permission to install software. Oh, I meant to say: If you're using GNOME, there should be a similar "root terminal" option. If not, open a terminal and then type "su -", followed by return. It will ask you for a password, then you'll have permission to install software. If you want to install things that need a GUI, you'll have to do this next: export DISPLAY=:0 XAUTHORITY=~username/.Xauthority -- Lee. Please send replies to the list, not to my email address. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: PASSWORD FOR DEBIAN CD TO INSTALL APLYCATIONS
On Wednesday 18 May 2005 10:08, M.Schweizer wrote: > how i get Passwort to Install a Linux Aplication In KDE, go to the menu. Then choose System->More Applications->Terminal Program (super user mode). That will ask you for a password, then give you a "root shell", which has permission to install software. > for wine its not > Install after Realplayer for Windows in Wine, him only Play him song if > you start him. There is a realplayer version for Linux. Do not use the WINE version if there is already a Linux version. It won't be as good. > In Reality not Play my a ram file directly from Internet . In Suse 9.0 > its Works ,not problem. I install allredy with Yast or KDE Once you install RealPlayer, you can choose what program to open files with from your control panel. Note: Xine (and Kaffeine, and mplayer, and some other players too) can play realplayer files, if you install the Linux realplayer codec files from the internet. -- Lee. Please send replies to the list, not to my email address. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
Re: help in sarge testing->stable
On (18/05/05 10:33), Alberto Bert wrote: > I'm running sarge, but I would like to keep using the testing distribution, > also after the release. Do you think there will be any kind of > problem in the transition between sarge and the new testing? I mean, > should I just upgrade my system and everything should work, or there are > some important changes I have to deal with? As long as you have 'testing' instead of 'sarge' in your sources.list everything should work fine. I suspect that since sarge is now frozen, there will be a build up of packages in 'sid' awaiting transition to testing once 'etch' become testing. So immediately after sarge goes stable you will experience a large upgrade of packages. I suggest you have 'apt-listbugs' installed prior to that so that you can make sure that nothing vital is going to break. Regards Clive -- www.clivemenzies.co.uk ... ...strategies for business -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
