Re: Inittab sur Debian Etch: Init id #x] respawning too fast
Le vendredi 24 août 2007 19:17, [EMAIL PROTECTED] a écrit : Bonjour à tous ! J'ai suivi le tutorial ##http://gentoo-wiki.com/HOWTO_Heartbeat_and_DRBD qui permet d'installer le DRBD Heartbeat, j'ai ajouté, conformément au tutorial, ##mo:2345:respawn:/usr/sbin/monit -d 10 -c /etc/monit/monitrc -g local le processus est toujours en mémoire après le démarrage ? de mémoire, tu n'est pas obligé de redémarrer la machine pour tester : init Q fait la même chose la commande seule fonctionne ? elle ne renvoie pas d'erreur ?
Re: X.org 7.2 et résolution
Eric DECORNOD a écrit : Le jeudi 23 août 2007 15:42, Frédéric Massot a écrit : Bonjour, [...] Mon problème est que le serveur X ne prends pas en compte la résolution indiqué dans le fichier xorg.conf, il configure la résolution au maximum disponible 1280x1024. Bonjour à tous Que d'approximations ! 1280x1024 ne représente pas la *résolution* d'un moniteur mais sa *définition* en nombre de pixels La résolution, c'est le nombre de pixels par rapport à une surface donnée. Elle est exprimée en dpi (points/pixels par pouce) , ppi Mon moniteur possède une définition de 1280x1024 et sa résolution est de 72 dpi Horreur : sur E17, le traducteur a traduit screen resolution par résolution d'écran alors qu'il aurait du traduire définition d'écran Cette erreur est reproduite partout sur le web. A rapprocher de la mauvaise traduction library (bibliothèque) en librairie Wikipedia ne se plante pas http://fr.wikipedia.org/wiki/R%C3%A9solution_num%C3%A9rique http://fr.wikipedia.org/wiki/D%C3%A9finition_d'%C3%A9cran http://tecfa.unige.ch/staf/staf-k/benetos/staf13/per1/tache5/resolution.html Jerry
Re: un modem usb RTC fonctionnel sous Debian?
Le vendredi 24 août 2007, Serge Cavailles a écrit : Je cherche une solution pour connecter un portable récent (qui ne possède pas de prise RS232) à Internet par le RTC. Personnellement, j'ai un vieil ordinateur portable qui m'avait obligé à utiliser une carte PCMCIA Xircom Cardbus Ethernet 10/100+Modem 56k. Certes, elle était plutôt onéreuse à l'époque et il n'est pas dit que le modèle existe encore, mais il devrait être possible d'en trouver une d'occasion pour quelques euros (par exemple là http://www.priceminister.com/offer/buy/3281919/Xircom-CardBus-Ethernet-10-100-Modem-56-k-Adaptateur-reseau-CardBus-EN-Fast-EN-1-Ports-Adaptateur-reseau.html) Bon courage !
Re: X.org 7.2 et résolution
Je te propose de modifier deux sections de ton xorg.conf ainsi : Section Monitor Identifier L1715S Option DPMS HorizSync 30-83 VertRefresh 56-75 EndSection Section Screen Identifier Default Screen Device Carte vidéo générique Monitor L1715S DefaultDepth24 SubSection Display Depth 1 Modes 1024x768 832x624 800x600 640x480 720x400 EndSubSection SubSection Display Depth 4 Modes 1024x768 832x624 800x600 640x480 720x400 EndSubSection SubSection Display Depth 8 Modes 1024x768 832x624 800x600 640x480 720x400 EndSubSection SubSection Display Depth 15 Modes 1024x768 832x624 800x600 640x480 720x400 EndSubSection SubSection Display Depth 16 Modes 1024x768 832x624 800x600 640x480 720x400 EndSubSection SubSection Display Depth 24 Modes 1024x768 832x624 800x600 640x480 720x400 EndSubSection EndSection Évidemment, si tu veux pouvoir accéder à une résolution supérieure à 1024x768, il te faudra rajouter les modes 1280x1024 et 1152x870. Bon courage !
Re: Dolphin
De Leeuw Guy a écrit : Bonjour Voyez la commande : update-alternatives ou le paquet galternatives -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: un modem usb RTC fonctionnel sous Debian?
Bonjour, Le samedi 25 août 2007 12:12, Manchot a écrit : Le vendredi 24 août 2007, Serge Cavailles a écrit : Je cherche une solution pour connecter un portable récent (qui ne possède pas de prise RS232) à Internet par le RTC. Personnellement, j'ai un vieil ordinateur portable qui m'avait obligé à utiliser une carte PCMCIA Xircom Cardbus Ethernet 10/100+Modem 56k. Pas de chance, sur les portables récents, le PCMCIA à disparu au profit du format Express Card :/ Merci quand même, et bon week-end. -- Serge
IRC en ligne de commande ?
Boujour, Est il possible d'utiliser IRC en ligne de commande via une connection ssh sur la machine ? Merçi Ptilou
Re: IRC en ligne de commande ?
Est il possible d'utiliser IRC en ligne de commande via une connection ssh sur la machine ? y'a un client irc dispo dans zsh :) M. -- Emmanuel Bouthenot mail : [EMAIL PROTECTED] gpg : 0x414EC36E jid : [EMAIL PROTECTED] irc : kolter@(freenode|oftc) -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: IRC en ligne de commande ?
On Sat, 2007-08-25 at 13:24 +0200, philippe L wrote: Boujour, Est il possible d'utiliser IRC en ligne de commande via une connection ssh sur la machine ? Merçi Ptilou Pour toi tout spécialement, telnet est le mieux adapté. signature.asc Description: This is a digitally signed message part
Upgrade Sarge vers Etch - Error 13 Invalid or unsupported executable format
Bonjour, soit un serveur en Sarge kernel 2.6.8 compilé maison, mdadm Raid1, md0=/boot en ext3, md1=/ en xfs et md2=swap. Je suis passé par aptitude dist-upgrade pour migrer vers Etch, hotplug a été purgé. Voici la sortie de cpuinfo: processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 2 model name : Intel(R) Celeron(R) CPU 2.00GHz stepping: 7 cpu MHz : 2004.899 cache size : 128 KB fdiv_bug: no hlt_bug : no f00f_bug: no coma_bug: no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid bogomips: 3956.73 Le problème est que la machine refuse de démarrer un noyau Etch (j'ai installé le 2.6.18-5-xen-vserver-686) ayant systématiquement l'erreur suivante dans le processus de démarrage: root (hd0,0) filesystem ext2fs on partition type fd root /vmlinuz-2.6.18-5-xen-vserver-686 Error 13 Invalid or unsupported executable format Et mon grub ressemble à: title Debian GNU/Linux, Etch 2.6.18-5-xen-vserver-686 root(hd0,0) kernel /vmlinuz-2.6.18-5-xen-vserver-686 root=/dev/md1 ro initrd /initrd.img-2.6.18-5-xen-vserver-686 savedefault C'est visiblement au niveau du initrd que ca ce passe. J'ai fais des update-initramfs et des mkinitramfs en incluant les modules xfs et raid1, rien n'y fait :-( Recompiler le noyau est une solution, mais j'aimerai bien comprendre. Le noyau Sarge 2.6.8 _sans_ initrd démarre parfaitement. Si l'un de vous a une idée lumineuse pour éclairer ma lanterne ;-) je l'en remercie d'avance. Bonne journée -- Daniel Huhardeaux _ _ _ _ enum+48 22 434 6431 (_ __) _ ) _ (_ __) _ _(_) iaxtel 1-700-849-6983 / / / // / // / / / / /_/ / / sip/iax:callto [EMAIL PROTECTED]/_/ ( ___( ___/ /_/ (_/ (_/_/.netFWD# 422493 -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: IRC en ligne de commande ?
Le 25/08/07, Emmanuel Bouthenot[EMAIL PROTECTED] a écrit : Est il possible d'utiliser IRC en ligne de commande via une connection ssh sur la machine ? y'a un client irc dispo dans zsh :) Arf, j'ai oublié j'utilise batch, un tuto avec ? Merci Ptilou
Re: IRC en ligne de commande ?
philippe L ecrivait le 25.08.2007 13:24: Boujour, Bonjour. Est il possible d'utiliser IRC en ligne de commande via une connection ssh sur la machine ? irssi Merçi de rien. @+ -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Upgrade Sarge vers Etch - Error 13 Invalid or unsupported executable format
Daniel Huhardeaux a écrit : [...] Le problème est que la machine refuse de démarrer un noyau Etch (j'ai installé le 2.6.18-5-xen-vserver-686) ayant systématiquement l'erreur suivante dans le processus de démarrage: root (hd0,0) filesystem ext2fs on partition type fd root /vmlinuz-2.6.18-5-xen-vserver-686 Error 13 Invalid or unsupported executable format [...] Pour les archives: le paquet xen-vserver-686 est à mettre en cause. En le réinstallant j'ai vu passer une erreur sur le initrd.img d'origine, le update-initramfs lancé derrière ne peut surement pas récupéré le paquet. J'ai installé un le 2.6.18-5-vserver-686 et l'erreur a disparue. Bonne journée -- Daniel Huhardeaux _ _ _ _ enum+48 22 434 6431 (_ __) _ ) _ (_ __) _ _(_) iaxtel 1-700-849-6983 / / / // / // / / / / /_/ / / sip/iax:callto [EMAIL PROTECTED]/_/ ( ___( ___/ /_/ (_/ (_/_/.netFWD# 422493 -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
vlc
debian sid == Salut liste, je recherche, si possible, une version packagée de vlc, incluant notamment x264 mp3 (voire complète :) et si ça n'existe pas, quelqu'un connaît-il un (très) bon howto pour le compiler _sans_ griller mon système (j'utilise pas mal de libs officielles pour les programmes video). m'ci d'avance JY -- I do not take drugs -- I am drugs. -- Salvador Dali
Re: vlc
Le samedi 25 août 2007 à 17:28 +0200, Jean-Yves F. Barbier a écrit : debian sid == Salut liste, je recherche, si possible, une version packagée de vlc, incluant notamment x264 mp3 (voire complète :) Pourquoi ? La version debian de vlc n'est pas complète ? Je peux pourtant lire les fichiers mp3 et même les vidéos encodées avec x264. Mais je suis en stable. et si ça n'existe pas, quelqu'un connaît-il un (très) bon howto pour le compiler _sans_ griller mon système (j'utilise pas mal de libs officielles pour les programmes video). Je l'ignore. m'ci d'avance Bof, de rien, JY AC -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: vlc
Christophe Alonso a écrit : Le samedi 25 août 2007 à 17:28 +0200, Jean-Yves F. Barbier a écrit : debian sid == Salut liste, je recherche, si possible, une version packagée de vlc, incluant notamment x264 mp3 (voire complète :) Pourquoi ? La version debian de vlc n'est pas complète ? Je peux pourtant lire les fichiers mp3 et même les vidéos encodées avec x264. Mais je suis en stable. les lire oui, mais plus les encoder (debian policy sur les licences, etc) -- To err is human, but I can REALLY foul things up.
Re: vlc
Le samedi 25 août 2007 à 17:45 +0200, Jean-Yves F. Barbier a écrit : Christophe Alonso a écrit : Le samedi 25 août 2007 à 17:28 +0200, Jean-Yves F. Barbier a écrit : debian sid == Salut liste, je recherche, si possible, une version packagée de vlc, incluant notamment x264 mp3 (voire complète :) Pourquoi ? La version debian de vlc n'est pas complète ? Je peux pourtant lire les fichiers mp3 et même les vidéos encodées avec x264. Mais je suis en stable. les lire oui, mais plus les encoder (debian policy sur les licences, etc) Alors, soit encoder en ogg et divx. Soit utiliser mencoder ? Mais j'admets que ça n'est pas du tout mon domaine, je n'ai aucun usage de l'encodage. Bon courage. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Mise à niveau linux-image via apt-get
Merci pour vos réponses. J'ai finalement redémarré. Mon second disque dur fut reconnu comme hdb et non plus comme hdf (quand je vous dit que ça change comme il veut ...). Bonne nouvelle, j'ai pu faire un apt-get remove et un apt-get install sur les paquets incriminés qui me posaient problème. Tout devrait être bon, menu.lst comporte normalement les deux noyaux : -4-686 et -5-686 (je vais encore redémarrer pour être certain). Maintenant histoire de marquer tout ça dans le marbre, je vais chercher une petite doc bien foutue sur udev, histoire que mes disques soient toujours reconnus comme il le faut. Si vous en avez une sous la main que je n'aurai pas facilement trouvé avec google, je suis preneur :) Merci pour votre aide ! - Florian On 8/25/07, Serge Smeesters [EMAIL PROTECTED] wrote: Salut, J'ai réussi a monter ma partition de /boot/ . # mount -t ext3 /dev/hdf1 /media/test Pourquoi pas dans /boot ?.. y a-t-il là autre chose ?!. Etrange, parfois mes disques se nomment /dev/hda pour le 1er puis /dev/hdb pour le second... un reboot plus tard ils se nomment hde et hdf respectivement ... Et peut-être avec un nouveau noyau, peuvent-elles devenir sda, sdb, etc. :) C'est pourquoi on utilise de plus en plus les identifiant de volume : « Most devices are indicated by a file name (of a block special device), like /dev/sda1, but there are other possibilities. For example, in the case of an NFS mount, device may look like knuth.cwi.nl:/dir. It is possible to indicate a block special device using its volume label or UUID (see the -L and -U options below). » La commande vol_id devrait t'aider à trouver ces identifiants (pour chaque partition) Dans ton /etc/fstab, tu auras quelque chose comme : UUID=b1da004f-cf90-4e16-b962-9f7540217301 /bootext3 defaults0 1 Mais personnellement, je n'ai pas séparé /boot de / Et puis aussi, pour le grub, je sais pas si on peut lui donner un tel identifiant... (ce serait bien évidemment ;) À+, Serge.
Re: IRC en ligne de commande ?
On 8/25/07, FrekoDing [EMAIL PROTECTED] wrote: philippe L ecrivait le 25.08.2007 13:24: Est il possible d'utiliser IRC en ligne de commande via une connection ssh sur la machine ? Personnellement j'utilise ircII qui fonctionne très bien. -- Vincent HOBEÏKA Early Optimization is the root of all evil - Donald Knuth
Re: vlc
Le samedi 25 août 2007 17:45, Jean-Yves F. Barbier a écrit : Christophe Alonso a écrit : Le samedi 25 août 2007 à 17:28 +0200, Jean-Yves F. Barbier a écrit : debian sid == Salut liste, je recherche, si possible, une version packagée de vlc, incluant notamment x264 mp3 (voire complète :) Pourquoi ? La version debian de vlc n'est pas complète ? Je peux pourtant lire les fichiers mp3 et même les vidéos encodées avec x264. Mais je suis en stable. les lire oui, mais plus les encoder (debian policy sur les licences, etc) En incluant les sources src dans votre sources.list et en faisant un apt-get build-dep vlc cela devrait marcher. Je ne comprends pas votre remarque sur la debian policy et l'encodage x264, pouvez-vous expliciter ? cordialement, J-F Massol
Re: vlc
Jean-François Massol a écrit : Le samedi 25 août 2007 17:45, Jean-Yves F. Barbier a écrit : Christophe Alonso a écrit : Le samedi 25 août 2007 à 17:28 +0200, Jean-Yves F. Barbier a écrit : debian sid == Salut liste, je recherche, si possible, une version packagée de vlc, incluant notamment x264 mp3 (voire complète :) Pourquoi ? La version debian de vlc n'est pas complète ? Je peux pourtant lire les fichiers mp3 et même les vidéos encodées avec x264. Mais je suis en stable. les lire oui, mais plus les encoder (debian policy sur les licences, etc) En incluant les sources src dans votre sources.list et en faisant un apt-get build-dep vlc cela devrait marcher. Je ne comprends pas votre remarque sur la debian policy et l'encodage x264, pouvez-vous expliciter ? mp3 a été viré pour cause de license non-libre et restrictive de frauenhoffen, et d'après (le très peu que j'ai trouvé de) ce que j'ai lû, c'est kif pour x264 pour ce qui est de l'encodage (Christophe), non, parce qu'il me faut monter au moins en 2200kbps en divx pour obtenir (à peine) la qualité d'un encodage en H264 (mais le temps d'encodage est bcp plus long) -- ... it still remains true that as a set of cognitive beliefs about the existence of God in any recognizable sense continuous with the great systems of the past, religious doctrines constitute a speculative hypothesis of an extremely low order of probability. -- Sidney Hook
Re: vlc
ha! aussi: les sources ne contiennent plus CES sources-là :( Jean-François Massol a écrit : Le samedi 25 août 2007 17:45, Jean-Yves F. Barbier a écrit : Christophe Alonso a écrit : Le samedi 25 août 2007 à 17:28 +0200, Jean-Yves F. Barbier a écrit : debian sid == Salut liste, je recherche, si possible, une version packagée de vlc, incluant notamment x264 mp3 (voire complète :) Pourquoi ? La version debian de vlc n'est pas complète ? Je peux pourtant lire les fichiers mp3 et même les vidéos encodées avec x264. Mais je suis en stable. les lire oui, mais plus les encoder (debian policy sur les licences, etc) En incluant les sources src dans votre sources.list et en faisant un apt-get build-dep vlc cela devrait marcher. Je ne comprends pas votre remarque sur la debian policy et l'encodage x264, pouvez-vous expliciter ? cordialement, J-F Massol -- I would rather spend 10 hours reading someone else's source code than 10 minutes listening to Musak waiting for technical support which isn't. (By Dr. Greg Wettstein, Roger Maris Cancer Center)
[HS] putty
salut j'aimerais avoir vos retours sur ce petit pgm SVP côté m$. c'est HS parce que Debian ne sera pas à un bout; c'est un ami artisan qui voudrait relier ses 2 portables (en camionettes) à son ebp au bureau pour éviter les ressaisies; et c'est la seule solution libre dont j'ai entendu parler (et qui paraisse assez simple à mettre en oeuvre) -- Chaos is King and Magic is loose in the world.
Re: vlc
Vous pouvez alors rajouter les dépôts multimédia : deb http://www.debian-multimedia.org/ etch main deb-src http://www.debian-multimedia.org/ etch main Et suivre la procédure de mon mail précédent. Bizarre l'histoire du x264 qui est sous licence GPL et qui est une implémentation parmi d'autre de la norme H.264. Bref, Bon courage J-F Massol Le samedi 25 août 2007 23:21, Jean-Yves F. Barbier a écrit : ha! aussi: les sources ne contiennent plus CES sources-là :( Jean-François Massol a écrit : Le samedi 25 août 2007 17:45, Jean-Yves F. Barbier a écrit : Christophe Alonso a écrit : Le samedi 25 août 2007 à 17:28 +0200, Jean-Yves F. Barbier a écrit : debian sid == Salut liste, je recherche, si possible, une version packagée de vlc, incluant notamment x264 mp3 (voire complète :) Pourquoi ? La version debian de vlc n'est pas complète ? Je peux pourtant lire les fichiers mp3 et même les vidéos encodées avec x264. Mais je suis en stable. les lire oui, mais plus les encoder (debian policy sur les licences, etc) En incluant les sources src dans votre sources.list et en faisant un apt-get build-dep vlc cela devrait marcher. Je ne comprends pas votre remarque sur la debian policy et l'encodage x264, pouvez-vous expliciter ? cordialement, J-F Massol --
Re: Upgrade Sarge vers Etch - Error 13 Invalid or unsupported executable format
Thierry B a écrit : [...] C'est donc une debian émulé par xen que tu as upgradé c'est ca Non, j'ai profité de l'upgrade pour installer un noyau capable de faire tourner des VM en xen et/ou vserver. -- Daniel Huhardeaux _ _ _ _ enum+48 22 434 6431 (_ __) _ ) _ (_ __) _ _(_) iaxtel 1-700-849-6983 / / / // / // / / / / /_/ / / sip/iax:callto [EMAIL PROTECTED]/_/ ( ___( ___/ /_/ (_/ (_/_/.netFWD# 422493 -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [HS] putty
Jean-Yves F. Barbier a écrit : salut j'aimerais avoir vos retours sur ce petit pgm SVP côté m$. c'est HS parce que Debian ne sera pas à un bout; c'est un ami artisan qui voudrait relier ses 2 portables (en camionettes) à son ebp au bureau pour éviter les ressaisies; et c'est la seule solution libre dont j'ai entendu parler (et qui paraisse assez simple à mettre en oeuvre) Excellent soft. -- Daniel Huhardeaux _ _ _ _ enum+48 22 434 6431 (_ __) _ ) _ (_ __) _ _(_) iaxtel 1-700-849-6983 / / / // / // / / / / /_/ / / sip/iax:callto [EMAIL PROTECTED]/_/ ( ___( ___/ /_/ (_/ (_/_/.netFWD# 422493 -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: vlc
je suis sous sid, mais, effectivement, je n'avais pas pensé aux sources de debian-multimedia, je teste ça et je renvoie la balle au cas où certains soient intéressés merci Jean-François Massol a écrit : Vous pouvez alors rajouter les dépôts multimédia : deb http://www.debian-multimedia.org/ etch main deb-src http://www.debian-multimedia.org/ etch main Et suivre la procédure de mon mail précédent. Bizarre l'histoire du x264 qui est sous licence GPL et qui est une implémentation parmi d'autre de la norme H.264. Bref, Bon courage J-F Massol -- : I used to think that this was just another demonstration of Larry's : enormous skill at pulling off what other people would fail or balk at. Well, everyone else knew it was impossible, so they didn't try. :-) -- Larry Wall in [EMAIL PROTECTED]
Re: [HS] putty
On Sat, Aug 25, 2007 at 11:27:07PM +0200, Jean-Yves F. Barbier wrote: salut j'aimerais avoir vos retours sur ce petit pgm SVP côté m$. putty fonctionne très bien, et est agrémenté d'exécutables en ligne de commande (pscp pour le scp...). -- Thomas Harding -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [HS] putty - SOLVED (enfin j'espere :)
je penses avoir trouvé mon bonheur sur le site de putty: un exe m$ (wintunnel), basé sur le code de putty (donc, d'après vos réponses, fiable et fonctionnant Tbien) permettant d'établir un VPN par clés. merci à vous -- I always have fun because I'm out of my mind!!!
Re: vlc
Le (on) samedi 25 août 2007 17:50, Jean-Yves F. Barbier a écrit (wrote) : je recherche, si possible, une version packagée de vlc, incluant notamment x264 mp3 (voire complète :) Pourquoi ? La version debian de vlc n'est pas complète ? Je peux pourtant lire les fichiers mp3 et même les vidéos encodées avec x264. Mais je suis en stable. les lire oui, mais plus les encoder (debian policy sur les licences, etc) Ah ouais, je comprends maintenant pourquoi l'encodage ne marche plus (j'encodais toujours en x264) depuis que j'ai upgradé mon vlc vers la version de sid. Faut voir si du coup on trouvera prochainement une version plus complète dans les dépôts multimedia. Manuel. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.net/?DebianFrench Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Apache 2.2.3 - wyłączyłem auth_basic - jakie sku tki?
Hej, Skonfigurowałem Apache2 z baza PostgreSQL w celu autoryzacji użytkowników. Musiałem dodać wg tego co tutaj piszą http://www.pitr.net/index.php/2007/08/08/internal-error-pcfg_openfile-called -with-null-filename/ opcje AuthBasicAuthoritative Off dzięki której logowanie działa prawidłowo. Poszedłem jeszcze dalej i wyłączyłem moduł auth_basic, zakomentowałem #AuthBasicAuthoritative Off i teraz jest ok, w logach Apache nie pojawiają sie wcześniejsze bledy: Internal error: pcfg_openfile() called with NULL filename Z czym wiąże się wyłączenie auth_basic? Czy tylko tym że nie będzie możliwości przykładowo korzystania ze standardowego .htaccess? -- Pozdarwaiam
script reglas iptables debian etch
saludos... tengo un server con debian etch, instale desde el cd net, solo escogio sistema base o standart, admas tengo el sgte scripot qe me funciona bien en sarge y centos tiuene esto ## CARGA DE ALGUNOS MODULOS NECESARIOS /sbin/modprobe iptable_nat /sbin/modprobe ip_nat_ftp /sbin/modprobe ip_conntrack_ftp ## LIMPIEZA DE REGLAS ANTERIORES iptables -t nat -F ## SE AUMENTAN EL NUMERO DE CONEXIONES SEGUIDAS #echo 65535 /proc/sys/net/ipv4/ip_conntrack_max ## SE IGNORAN LOS ERRORES DEL ICMP echo 1 /proc/sys/net/ipv4/icmp_ignore_bogus_error_responses ## SE HABILITA EL FORWARD DE LOS PAQUETES echo 1 /proc/sys/net/ipv4/ip_forward ## SE HABILITA LA PROTECCION CONTRA LOS SYN FLOODS #echo 1 /proc/sys/net/ipv4/tcp_syncookies ## SE DECLARAN TODAS LAS VARIABLES LAN=192.168.10.0/24 WAN=10.254.146.9 NUBE=0/0 PTOSQUID=80 ## SE QUITAN LOS REGISTROS DE BROADCAST EN /var/log/messages iptables -t mangle -I PREROUTING -j DROP -d 224.0.0.0/8 ## SE CONECTA CON EL PROXY TRANSPARENTE iptables -t nat -A PREROUTING -i eth1 -p tcp -s $LAN -d $NUBE --dport 80 -j REDIRECT --to-port 3128 ## MANEJO DE PUERTOS #iptables -t filter -A INPUT -p tcp -s $LAN --dport 22 -j ACCEPT #iptables -t filter -A INPUT -p tcp -s $LAN --dport 20:21 -j ACCEPT #iptables -t filter -A INPUT -p tcp --dport 22 -j DROP #iptables -t filter -A INPUT -p tcp --dport 20:21 -j DROP iptables -t nat -A POSTROUTING -p tcp -s $LAN -d $NUBE --dport 53 -j MASQUERADE iptables -t nat -A POSTROUTING -p udp -s $LAN -d $NUBE --dport 53 -j MASQUERADE iptables -t nat -A POSTROUTING -p tcp -s $LAN -d $NUBE --dport 5190 -j MASQUERADE iptables -t nat -A POSTROUTING -p udp -s $LAN -d $NUBE --dport 5190 -j MASQUERADE iptables -t nat -A POSTROUTING -p tcp -s $LAN -d $NUBE --dport 1863 -j MASQUERADE iptables -t nat -A POSTROUTING -p udp -s $LAN -d $NUBE --dport 1863 -j MASQUERADE iptables -t nat -A POSTROUTING -p udp -s $LAN -d $NUBE --dport 1024:65535 -j MASQUERADE ## YA HACIENDO EL NAT EN LA RED iptables -t nat -A POSTROUTING -s $LAN -d $NUBE -j SNAT --to-source $WAN # /root/cbq.init stats | more iptables -t nat -L -n ### cuando ejecuto ./cabinas.sh sale esto : command not found3: not found.le iptable_nat not found.le ip_nat_ftp not found.le ip_conntrack_ftp : command not found8: iptables: No chain/target/match by that name command not found11: : No existe el fichero o el directoriopv4/icmp_ignore_bogus_error_responses : No existe el fichero o el directoriopv4/ip_forward : command not found20: : command not found26: ' specified.3.6: invalid mask `8 Try `iptables -h' or 'iptables --help' for more information. : command not found29: ' specified.3.6: invalid mask `24 Try `iptables -h' or 'iptables --help' for more information. : command not found37: : command not found38: 'ptables v1.3.6: Invalid target name `MASQUERADE Try `iptables -h' or 'iptables --help' for more information. 'ptables v1.3.6: Invalid target name `MASQUERADE Try `iptables -h' or 'iptables --help' for more information. 'ptables v1.3.6: Invalid target name `M por afvor como soliciomes linux manana hablamos Sé un Mejor Amante del Cine ¿Quieres saber cómo? ¡Deja que otras personas te ayuden! http://advision.webevents.yahoo.com/reto/entretenimiento.html Sé un Mejor Amante del Cine ¿Quieres saber cómo? ¡Deja que otras personas te ayuden! http://advision.webevents.yahoo.com/reto/entretenimiento.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: OT: (¿o no?) Linux Torvals y Debian
Creo que te equivocas, con respecto a Slackware, el instalador es de lo mas sencillo que conozco, las configuraciones son a mano, en /etc/ de lo mas facil y entendible, lo unico que necesitas saber, es el nombre de la herramienta que quieres. Con laptops, si creo que se requiere mas conocimiento. Estoy completamente de acuerdo contigo. Slackware es una distribucion de la mas sencillas que conozco al instalar. Me equivocado si, lo que queria decir era la utilisacion de slack y no su installacion. Slack tiene un minimo de paquetes , y claramente my pocos paquetes. 600 quizas (puedo ewuivocarme). Por lo tanto para utilizarla cuanto el paquete no existe se debe comprender un poco su systema. Hay que compilar las (sources), an~adir el path de las librerias y unas tantas otras cosas, o utilizar slackbuilds existentes o sino crear sus propios slackbuilds. O checkinstall ... La slackware seria my facil si tenia bastante paquetes. He olvidado que la slack tampoco tiene un verdadero gestor de paquetes (dependencias). Ahora si pueden hacer comparacion con debian. PS:Utilizé tanto slackware/arch/gentoo como debian todos con fluxbox/icewm. Porquefluxbox/icewm? Porque me permite hacer todo a mano y por lo tanto conocer mas de cerca el systema. No me gusta nada KDE/GNOME/XFCE... Porque entonces utilizas tu systema a traves de capas abstractas. Y eso es en mi simple opinion, y para mi gusto my personal, bastante mal (obscurontismo). Lo de KDE GNOME XFCE, no es un troll, ya que he justificado mi opinion. Si alguien (habran muchos supongo) que tienen otra opinion que la justifican :) Cordialmente a toda america latina. Bayrouni -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: script reglas iptables debian etch
El Sat, 25 Aug 2007 08:39:13 +0200 (CEST) Paúl Criollo Ortiz [EMAIL PROTECTED] escribió: saludos... tengo un server con debian etch, instale desde el cd net, solo escogio sistema base o standart, admas tengo el sgte scripot qe me funciona bien en sarge y centos tiuene esto ## CARGA DE ALGUNOS MODULOS NECESARIOS /sbin/modprobe iptable_nat /sbin/modprobe ip_nat_ftp /sbin/modprobe ip_conntrack_ftp ## LIMPIEZA DE REGLAS ANTERIORES iptables -t nat -F ## SE AUMENTAN EL NUMERO DE CONEXIONES SEGUIDAS #echo 65535 /proc/sys/net/ipv4/ip_conntrack_max ## SE IGNORAN LOS ERRORES DEL ICMP echo 1 /proc/sys/net/ipv4/icmp_ignore_bogus_error_responses ## SE HABILITA EL FORWARD DE LOS PAQUETES echo 1 /proc/sys/net/ipv4/ip_forward ## SE HABILITA LA PROTECCION CONTRA LOS SYN FLOODS #echo 1 /proc/sys/net/ipv4/tcp_syncookies ## SE DECLARAN TODAS LAS VARIABLES LAN=192.168.10.0/24 WAN=10.254.146.9 NUBE=0/0 PTOSQUID=80 ## SE QUITAN LOS REGISTROS DE BROADCAST EN /var/log/messages iptables -t mangle -I PREROUTING -j DROP -d 224.0.0.0/8 ## SE CONECTA CON EL PROXY TRANSPARENTE iptables -t nat -A PREROUTING -i eth1 -p tcp -s $LAN -d $NUBE --dport 80 -j REDIRECT --to-port 3128 ## MANEJO DE PUERTOS #iptables -t filter -A INPUT -p tcp -s $LAN --dport 22 -j ACCEPT #iptables -t filter -A INPUT -p tcp -s $LAN --dport 20:21 -j ACCEPT #iptables -t filter -A INPUT -p tcp --dport 22 -j DROP #iptables -t filter -A INPUT -p tcp --dport 20:21 -j DROP iptables -t nat -A POSTROUTING -p tcp -s $LAN -d $NUBE --dport 53 -j MASQUERADE iptables -t nat -A POSTROUTING -p udp -s $LAN -d $NUBE --dport 53 -j MASQUERADE iptables -t nat -A POSTROUTING -p tcp -s $LAN -d $NUBE --dport 5190 -j MASQUERADE iptables -t nat -A POSTROUTING -p udp -s $LAN -d $NUBE --dport 5190 -j MASQUERADE iptables -t nat -A POSTROUTING -p tcp -s $LAN -d $NUBE --dport 1863 -j MASQUERADE iptables -t nat -A POSTROUTING -p udp -s $LAN -d $NUBE --dport 1863 -j MASQUERADE iptables -t nat -A POSTROUTING -p udp -s $LAN -d $NUBE --dport 1024:65535 -j MASQUERADE ## YA HACIENDO EL NAT EN LA RED iptables -t nat -A POSTROUTING -s $LAN -d $NUBE -j SNAT --to-source $WAN # /root/cbq.init stats | more iptables -t nat -L -n ### cuando ejecuto ./cabinas.sh sale esto : command not found3: not found.le iptable_nat not found.le ip_nat_ftp not found.le ip_conntrack_ftp : command not found8: iptables: No chain/target/match by that name command not found11: : No existe el fichero o el directoriopv4/icmp_ignore_bogus_error_responses : No existe el fichero o el directoriopv4/ip_forward : command not found20: : command not found26: ' specified.3.6: invalid mask `8 Try `iptables -h' or 'iptables --help' for more information. : command not found29: ' specified.3.6: invalid mask `24 Try `iptables -h' or 'iptables --help' for more information. : command not found37: : command not found38: 'ptables v1.3.6: Invalid target name `MASQUERADE Try `iptables -h' or 'iptables --help' for more information. 'ptables v1.3.6: Invalid target name `MASQUERADE Try `iptables -h' or 'iptables --help' for more information. 'ptables v1.3.6: Invalid target name `M por afvor como soliciomes linux manana hablamos Vamos a ver: ejectuta iptables pero hay una orden que no puede ejecutar. O es echo, y entonces no tienes bien configurado la variable PATH, o, más probable, no tienes instalado module-init-tools, que contiene a modprobe. En cuanto a los mensajes del tipo Invalid target ... me hace pensar que estás usando un núcleo personalizado y que no has activado las características necesarias. Mira en Networking - Networking options - Network packet filtering framework (Netfilter) y siguientes submenús. Saludos. -- Manolo Díaz
cambiar el nombre de un PC luego de instalado
Hola. Alguien tiene idea de como se le cambia el nombre a un PC, con debian 4.0, luego de ser instalado? De antemano gracias por su colaboracion. No tengo idea de que hacer. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: cambiar el nombre de un PC luego de instalado
On 8/25/07, Juan Carlos Fuentes M. [EMAIL PROTECTED] wrote: Hola. Alguien tiene idea de como se le cambia el nombre a un PC, con debian 4.0, luego de ser instalado? man hostname De antemano gracias por su colaboracion. No tengo idea de que hacer. Si lo quieres hacer permanente: /etc/hostname Si quieres ver como se asigna : /etc/init.d/hostname.sh Si quieres saber cuando se asigna: /etc/rcS.d/S02hostname.sh -- Saludos, Toño http://agc.com.mx/antoniogc/blog
Re: cambiar el nombre de un PC luego de instalado
El 25/08/07, Antonio Galicia [EMAIL PROTECTED] escribió: On 8/25/07, Juan Carlos Fuentes M. [EMAIL PROTECTED] wrote: Hola. Alguien tiene idea de como se le cambia el nombre a un PC, con debian 4.0, luego de ser instalado? man hostname De antemano gracias por su colaboracion. No tengo idea de que hacer. Si lo quieres hacer permanente: /etc/hostname Si quieres ver como se asigna : /etc/init.d/hostname.sh Si quieres saber cuando se asigna: /etc/rcS.d/S02hostname.sh -- Saludos, Toño http://agc.com.mx/antoniogc/blog Al final de la tarde, al llegar a casa, hare lo recomendado por ustedes. Mil gracias por sus indicaciones.
Problemas con la hora en KDE 3.5.7
¡Hola a todos! Uso Debian Etch, todo estable, aunque con todo lo que salga en los backports, es por esa razón que tengo KDE 3.5.7, el problema radica en que tengo tres horas de diferencia con la realidad, vivo en Cuba, y así tengo configurado en el Centro de Control, cuando pido ajustar fecha y hora la hora (click drecho sobre el reloj) en esa ventana la hora está bien, igual si lo hago a través de el Centro de Control, sin embargo no logro que en la esquina inferior izquierda mi reloj esté bien. ¿Alguna idea? Saludos y gracias de antemano. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
RE: OT: (¿o no?) Linux Torvals y Debian
El Sábado, 25 de Agosto de 2007 04:02, bayrouni escribió: PS:Utilizé tanto slackware/arch/gentoo como debian todos con fluxbox/icewm. Porquefluxbox/icewm? Porque me permite hacer todo a mano y por lo tanto conocer mas de cerca el systema. No me gusta nada KDE/GNOME/XFCE... Porque entonces utilizas tu systema a traves de capas abstractas. Y eso es en mi simple opinion, y para mi gusto my personal, bastante mal (obscurontismo). Lo de KDE GNOME XFCE, no es un troll, ya que he justificado mi opinion. Si alguien (habran muchos supongo) que tienen otra opinion que la justifican :) Jejejeje, ahi entramos en el terreno de los escritorios, cuando empece con Linux estaba KDE 1.algo, y como no me gustaba su apariencia, habia probado varios escritorios, lo que mas use en ese entonces fue Windowmaker, despues KDE fue mejorando lo mismo para Gnome, hoy en dia me parece que en apariencia no hay quien los supere, mas alla que te ahorran de hacer un monton de configuraciones del sistema que las hacen por si solo ellos o con un click, obviamente hay quienes prefieren hacer todo a mano, yo sinceramente a esta altura ya no, prefiero que lo haga la PC y despues retocar algo si es necesario, de hecho (y seguramente muchos no estaran de acuerdo) en los ultimos servidores que instale tambien instale un KDE o un Gnome (sin el kdm o gdm), para realizar las configuraciones en forma mas rapida Comparto lo que dice el Sr. Torvalds con que es mejor hacer las cosas de forma facil, pero no comparto con que Debian sea complicada, quizas hace un tiempo atras lo fue, pero hoy en dia la verdad cualquier distro son similares a nivel de complejidad
Re: script reglas iptables debian etch
El Sat, 25 Aug 2007 15:50:07 +0200 (CEST) Paúl Criollo Ortiz [EMAIL PROTECTED] escribió: saludos... si tengo instalado el module-init-tools, el iptables es el lo instala debian etch por defecto el 1.3.6, no compile ni el kernel ni el iptables... att. pol Extraño. Las únicas órdenes que usa el script son echo, modprobe e iptables y según tú están las tres en tu sistema. Veo que las líneas de tu script están cortadas. Esto es por la edición del correo, ¿verdad?. ¿O las tiene así en tu script?. Lo menciono porque, tal como aparece por ejemplo iptables -t nat -A POSTROUTING -p tcp -s $LAN -d $NUBE --dport 53 -j MASQUERADE la shell la interpreta como dos órdenes distinta. La primera incompleta y que te sugerirá leer la ayuda de iptables; y la segunda, --dport, no va a ser encontrada. Sabrás que si tienes que dividir una orden en líneas diferentes has de escapar el retorno de línea con una barra invertida (\), ¿no?. P.D.: Dos cosas: He recibido tu correo sólo en privado cuando la costumbre es responde a la lista. No respondas encima. Eso dificulta la lectura del hilo. -- Manolo Díaz
Re: Phmyadmin
Eso suele pasar cuando ha terminado el tiempo de tu sesión. ¿Cuánto dura una sesión en tu apache desde la última petición que le haces? (no recuerdo ahora el nombre exacto del parámetro). Da la impresión de que ese tiempo es muy corto. Sí, recuerdo que el tiempo de sesion es de al menos Login cookie validity: 1800 que creo que es bastante. Además esta recien instalado de apt-get. No creo que exista otro parámetro relacionado a eso que haga que la sesion dure nada. ¿o tu qué crees? Gracias por tus comentarios -- El pueblo no debe de temer a sus gobernantes, los gobernantes son los que deben de temer a su pueblo.
RE: Phmyadmin
Debes revisar tambien el tiempo de vida de las variables en apache -Mensaje original- De: coin [mailto:[EMAIL PROTECTED] Enviado el: sábado, 25 de agosto de 2007 12:10 Para: debian-user-spanish@lists.debian.org Asunto: Re: Phmyadmin Eso suele pasar cuando ha terminado el tiempo de tu sesión. ¿Cuánto dura una sesión en tu apache desde la última petición que le haces? (no recuerdo ahora el nombre exacto del parámetro). Da la impresión de que ese tiempo es muy corto. Sí, recuerdo que el tiempo de sesion es de al menos Login cookie validity: 1800 que creo que es bastante. Además esta recien instalado de apt-get. No creo que exista otro parámetro relacionado a eso que haga que la sesion dure nada. ¿o tu qué crees? Gracias por tus comentarios -- El pueblo no debe de temer a sus gobernantes, los gobernantes son los que deben de temer a su pueblo.
Re: Phmyadmin
El Sat, 25 Aug 2007 11:10:17 -0500 coin [EMAIL PROTECTED] escribió: Eso suele pasar cuando ha terminado el tiempo de tu sesión. ¿Cuánto dura una sesión en tu apache desde la última petición que le haces? (no recuerdo ahora el nombre exacto del parámetro). Da la impresión de que ese tiempo es muy corto. Sí, recuerdo que el tiempo de sesion es de al menos Login cookie validity: 1800 que creo que es bastante. Sí. Obviamente no has agotado ese tiempo. Además esta recien instalado de apt-get. No creo que exista otro parámetro relacionado a eso que haga que la sesion dure nada. ¿o tu qué crees? Gracias por tus comentarios SSLSessionCacheTimeout, pero sólo si usas una conexión segura. De haber otra ignoro cuál. Saludos. -- Manolo Díaz
Re: Como hacer funcionar Facturalux en debian
El Fri, 24 Aug 2007 11:20:37 -0300, Angel Guadarrama escribió: José Manuel (EB8CXW) [EMAIL PROTECTED] escribió: Hola a [EMAIL PROTECTED]: He instalado facturalux para etch. He buscado en google como instalarlo, he seguido los pasos de esta página: http://www.guadalinex.org/guadapedia/index.php/Receta:_C%C3%B3mo_instalar_FacturaLux_(Guadalinex_2004) Pero no funciona, al arrancar facturalux, aparece una ventana, que me pide usuario y palabra de paso, como usuario pongo el creado, en las notas de la página anteriormente mencionada y como palabra de paso una inventada (ya que no se a que se refiere), le doy a siguiente y me aparece otra ventana con lo siguiente: Cargando driver de la base de datos... Ok Comprobando conexión a la base de datos... Error: Pulse en Atrás y compruebe su configuración. Y ya no se seguir. Me podéis indicar que estoy haciendo mal y como corregirlo, gracias. -- Tienes instalado mysql server ? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: script reglas iptables debian etch
El Sat, 25 Aug 2007 08:39:13 +0200, Paúl Criollo Ortiz escribió: saludos... tengo un server con debian etch, instale desde el cd net, solo escogio sistema base o standart, admas tengo el sgte scripot qe me funciona bien en sarge y centos tiuene esto ## CARGA DE ALGUNOS MODULOS NECESARIOS /sbin/modprobe iptable_nat /sbin/modprobe ip_nat_ftp /sbin/modprobe ip_conntrack_ftp ## LIMPIEZA DE REGLAS ANTERIORES iptables -t nat -F ## SE AUMENTAN EL NUMERO DE CONEXIONES SEGUIDAS #echo 65535 /proc/sys/net/ipv4/ip_conntrack_max ## SE IGNORAN LOS ERRORES DEL ICMP echo 1 /proc/sys/net/ipv4/icmp_ignore_bogus_error_responses ## SE HABILITA EL FORWARD DE LOS PAQUETES echo 1 /proc/sys/net/ipv4/ip_forward ## SE HABILITA LA PROTECCION CONTRA LOS SYN FLOODS #echo 1 /proc/sys/net/ipv4/tcp_syncookies ## SE DECLARAN TODAS LAS VARIABLES LAN=192.168.10.0/24 WAN=10.254.146.9 NUBE=0/0 PTOSQUID=80 ## SE QUITAN LOS REGISTROS DE BROADCAST EN /var/log/messages iptables -t mangle -I PREROUTING -j DROP -d 224.0.0.0/8 ## SE CONECTA CON EL PROXY TRANSPARENTE iptables -t nat -A PREROUTING -i eth1 -p tcp -s $LAN -d $NUBE --dport 80 -j REDIRECT --to-port 3128 ## MANEJO DE PUERTOS #iptables -t filter -A INPUT -p tcp -s $LAN --dport 22 -j ACCEPT #iptables -t filter -A INPUT -p tcp -s $LAN --dport 20:21 -j ACCEPT #iptables -t filter -A INPUT -p tcp --dport 22 -j DROP #iptables -t filter -A INPUT -p tcp --dport 20:21 -j DROP iptables -t nat -A POSTROUTING -p tcp -s $LAN -d $NUBE --dport 53 -j MASQUERADE iptables -t nat -A POSTROUTING -p udp -s $LAN -d $NUBE --dport 53 -j MASQUERADE iptables -t nat -A POSTROUTING -p tcp -s $LAN -d $NUBE --dport 5190 -j MASQUERADE iptables -t nat -A POSTROUTING -p udp -s $LAN -d $NUBE --dport 5190 -j MASQUERADE iptables -t nat -A POSTROUTING -p tcp -s $LAN -d $NUBE --dport 1863 -j MASQUERADE iptables -t nat -A POSTROUTING -p udp -s $LAN -d $NUBE --dport 1863 -j MASQUERADE iptables -t nat -A POSTROUTING -p udp -s $LAN -d $NUBE --dport 1024:65535 -j MASQUERADE ## YA HACIENDO EL NAT EN LA RED iptables -t nat -A POSTROUTING -s $LAN -d $NUBE -j SNAT --to-source $WAN # /root/cbq.init stats | more iptables -t nat -L -n ### cuando ejecuto ./cabinas.sh sale esto : command not found3: not found.le iptable_nat not found.le ip_nat_ftp not found.le ip_conntrack_ftp : command not found8: iptables: No chain/target/match by that name command not found11: : No existe el fichero o el directoriopv4/icmp_ignore_bogus_error_responses : No existe el fichero o el directoriopv4/ip_forward : command not found20: : command not found26: ' specified.3.6: invalid mask `8 Try `iptables -h' or 'iptables --help' for more information. : command not found29: ' specified.3.6: invalid mask `24 Try `iptables -h' or 'iptables --help' for more information. : command not found37: : command not found38: 'ptables v1.3.6: Invalid target name `MASQUERADE Try `iptables -h' or 'iptables --help' for more information. 'ptables v1.3.6: Invalid target name `MASQUERADE Try `iptables -h' or 'iptables --help' for more information. 'ptables v1.3.6: Invalid target name `M por afvor como soliciomes linux manana hablamos añade el path de iptables : iptables= /sbin/iptables -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Programa para reconocer wifi's
El vie, 24-08-2007 a las 11:02 +0200, Juan Luis Belmonte Mendez escribió: iwlist scan wlan0 el comando correcto es: iwlist interfaz (ethX, wlanX) scan saludos, -- World domination. Fast. — Linus Torvalds -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Programa para reconocer wifi's
On 8/25/07, Marcos Toro Oyarzo [EMAIL PROTECTED] wrote: El vie, 24-08-2007 a las 11:02 +0200, Juan Luis Belmonte Mendez escribió: iwlist scan wlan0 el comando correcto es: iwlist interfaz (ethX, wlanX) scan saludos, -- World domination. Fast. — Linus Torvalds Tienes toda la razón. Aunque si lo probó y le dió error, seguro que se dió cuenta a la primera :) Saludos. De todas maneras decir que pruebe todas las maneras posibles, así podrá ver que le gsta más.
Re: Problemas con la hora en KDE 3.5.7
El Saturday 25 August 2007 11:56:40 Pablo Rafael Lopez Martinez escribió: Aupa reloj esté bien. ¿Alguna idea? Pueden ser dos cosas a mi entender una que tengas mal seleccionada la zona, el reloj de kde puede mostrar muchas zonas horarias. Si le das con el boton derecho sobre el reloj.. te presenta un menu y hay una opción Mostrar el huso horario por lo general esta en Zona horaria local Esto sirve para configurar más zonas y poder ver con rapidez las horas locales en otros sitios La otra es que tengas mal configurada la zona horaria de la máquina. Puedes hacer dpkg-reconfigure tzdata Y configurar el reloj del sistema. Un saludo BasaBuru
Re: novedades cds
El día 24/08/07, Mastrangelo Lorena [EMAIL PROTECTED] escribió: Queria solicitarles el listado de cd o una direccion donde pueda bajarlos. Saludos http://www.debian.org/distrib/ftplist http://www.debian.org/distrib/netinst http://www.debian.org/CD/ http://www.debian.org/mirror/list Espero poder ayudarte con eso... si es que entendí mal lo que necesitabas Saludos Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si no es vd. el destinatario indicado, queda notificado de que la lectura, utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. El correo electrónico vía Internet no permite asegurar la confidencialidad de los mensajes que se transmiten ni su integridad o correcta recepción. Yell Argentina S.A. no asume ninguna responsabilidad por estas circunstancias. This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by a professional privilege or whose disclosure is prohibited by law.If you are not the intended recipient you are hereby notified that any read, dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it. Internet e-mail neither guarantees the confidentiality nor the integrity or proper receipt of the messages sent. Yell Argentina S.A. does not assume any liability for those circumstances. -- V A R G U X http://vargux.blogspot.com/ http://varg.ux.googlepages.com http://es.wikipedia.org/wiki/Usuario:VARGUX http://www.fotolog.com/vargux/ http://vargux.deviantart.com/gallery/ http://www.myspace.com/vargux ''' GNU/Linux user Nº 4088010 ' #...#.#.#.#...#.# .#.#.#.#...#.#.#...#.#.#.# ..#...#.##.#..#.#.#..#...###...#.#..# ...#.#.#..##.#.#...#..#.#.#.# .#.##...#.#....####.#
Re: Como hacer funcionar Facturalux en debian
El 25/08/07, hoock [EMAIL PROTECTED] escribió: El Fri, 24 Aug 2007 11:20:37 -0300, Angel Guadarrama escribió: JosÃ(c) Manuel (EB8CXW) [EMAIL PROTECTED] escribió: Hola a [EMAIL PROTECTED]: He instalado facturalux para etch. He buscado en google como instalarlo, he seguido los pasos de esta página: http://www.guadalinex.org/guadapedia/index.php/Receta:_C%C3%B3mo_instalar_FacturaLux_(Guadalinex_2004) Pero no funciona, al arrancar facturalux, aparece una ventana, que me pide usuario y palabra de paso, como usuario pongo el creado, en las notas de la página anteriormente mencionada y como palabra de paso una inventada (ya que no se a que se refiere), le doy a siguiente y me aparece otra ventana con lo siguiente: Cargando driver de la base de datos... Ok Comprobando conexión a la base de datos... Error: Pulse en Atrás y compruebe su configuración. Y ya no se seguir. Me podéis indicar que estoy haciendo mal y como corregirlo, gracias. -- Tienes instalado mysql server ? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] En usuario y palabra de paso o password tienes que poner el usuario y password de un usuario con acceso a la base de datos que tengas, ya sea postgre sql o mysql, ten cuidado que en la ventana de acceso tiene un boton que despilega la pantalla de conexion al servidor, y hay un driver que es sqllite para no instalar un servidor entero. -- Usuario Linux #437264 Maquina Linux #354674 - - - http://alwar.mainfri.com
Re: Problemas con la hora en KDE 3.5.7
El Sábado, 25 de Agosto de 2007 15:33, BasaBuru escribió: El Saturday 25 August 2007 11:56:40 Pablo Rafael Lopez Martinez escribió: Aupa reloj esté bien. ¿Alguna idea? Pueden ser dos cosas a mi entender una que tengas mal seleccionada la zona, el reloj de kde puede mostrar muchas zonas horarias. Si le das con el boton derecho sobre el reloj.. te presenta un menu y hay una opción Mostrar el huso horario por lo general esta en Zona horaria local Esto sirve para configurar más zonas y poder ver con rapidez las horas locales en otros sitios La otra es que tengas mal configurada la zona horaria de la máquina. Puedes hacer dpkg-reconfigure tzdata Y configurar el reloj del sistema. Un saludo BasaBuru A mi me habia pasado eso mismo con un Kubuntu 7.10, si ponia en hora el sistema el kontact me marcaba 3 horas de diferencia, no le habia dado mayor importancia por que lo habia instalado solo para probarlo, pero lo poco que lo mire no le encontre forma de que quedara sincronizada la hora del panel con la del resto de las aplicaciones, la forma en que lo solucione provisoriamente hasta que lo desinstale para probar otra distro fue bajarme un reloj para SuperKaramba
petición de informacion
Hola Bueno mi inquietud sobre debian es si es totalmente compatible con mi tarjeta madre Intel d101gcc ya que estoy muy interesado en instalar debian pero necesito que el audio y el video integrado de mi placa madre o mother board funcionen bajo linux, tengo conocimientos medianos de linux aunque no domino muchos comandos del shell aun, bueno esa es mi inquietud y quien mejor que ustedes para explicarme o darme dicha información estoy descargando debian amd64 y ia64 ya que mi procesador es un dual core x64 soy fanatico de debian desde el primer día que lo use en un infocentro aquí en Venezuela (como ustedes saben Venezuela esta apollando el software libre su uso y desarrollo aunque en este momento los guru en GNU/linux, usuarios y fanaticos tenemos una batalla contra microsoft mocosoft que quiere implantar como estandar de su formato de archivo de documento .doc que viola el decreto 3390) debian es un sistema muy completo y con una multitud de paquetes de software que quiero trabajar mientras escribo este correo estoy leyendo el manual de debian amd64 soy estudiante de informatica y tambien me ofresco como colaborador pero ojo primero lo primero quiero aprender a usar debian y por lo tanto mi prioridad es instalarlo actualmente uso windows xp (propietario hasta las metras), espero en unos 3 años ser ingeniero en informática pero por desgracia los softwares que he usado todos son bajo windows claro uso software libre en windows pero no es lo mismo que usar un sistema GNU/linux y ustedes más que yo lo saben, bueno creo que para una simple pregunta escribí demasiado Espero una respuesta y toda la información sobre software libre para mi es de alto interés. Gracias por todo Alejandro García C.I. 18044972 Venezuela, Edo Aragua Telf 058-0246-5211677 los ceros antes del 5 y del 2 creo que no van Cel 058-0414-5620069 los ceros antes del 5 y del 4 creo que no van Nota: En dado caso he dado toda mi información por si quieren contactarme de otra forma a parte del uso del correo electrónico o E-mail. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: novedades cds
El 25/08/07, V A R G U X [EMAIL PROTECTED] escribió: El día 24/08/07, Mastrangelo Lorena [EMAIL PROTECTED] escribió: Queria solicitarles el listado de cd o una direccion donde pueda bajarlos. Saludos http://www.debian.org/distrib/ftplist http://www.debian.org/distrib/netinst http://www.debian.org/CD/ http://www.debian.org/mirror/list Espero poder ayudarte con eso... si es que entendí mal lo que necesitabas Saludos Este mensaje se dirige exclusivamente a su destinatario y puede contener información privilegiada o confidencial. Si no es vd. el destinatario indicado, queda notificado de que la lectura, utilización, divulgación y/o copia sin autorización está prohibida en virtud de la legislación vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente por esta misma vía y proceda a su destrucción. El correo electrónico vía Internet no permite asegurar la confidencialidad de los mensajes que se transmiten ni su integridad o correcta recepción. Yell Argentina S.A. no asume ninguna responsabilidad por estas circunstancias. This message is intended exclusively for its addressee and may contain information that is CONFIDENTIAL and protected by a professional privilege or whose disclosure is prohibited by law.If you are not the intended recipient you are hereby notified that any read, dissemination, copy or disclosure of this communication is strictly prohibited by law. If this message has been received in error, please immediately notify us via e-mail and delete it. Internet e-mail neither guarantees the confidentiality nor the integrity or proper receipt of the messages sent. Yell Argentina S.A. does not assume any liability for those circumstances. -- V A R G U X http://vargux.blogspot.com/ http://varg.ux.googlepages.com http://es.wikipedia.org/wiki/Usuario:VARGUX http://www.fotolog.com/vargux/ http://vargux.deviantart.com/gallery/ http://www.myspace.com/vargux ''' GNU/Linux user Nº 4088010 ' #...#.#.#.#...#.# .#.#.#.#...#.#.#...#.#.#.# ..#...#.##.#..#.#.#..#...###...#.#..# ...#.#.#..##.#.#...#..#.#.#.# .#.##...#.#....####.# Cortésmente pregunto ¿es necesaria una firma de tales características? Saludos -- usuario linux #274354 normas de la lista: http://wiki.debian.org/NormasLista
Re: petición de informacion
El 25/08/07, Alejandro García [EMAIL PROTECTED] escribió: Hola Bueno mi inquietud sobre debian es si es totalmente compatible con mi tarjeta madre Intel d101gcc ya que estoy muy interesado en instalar debian pero necesito que el audio y el video integrado de mi placa madre o mother board funcionen bajo linux, tengo conocimientos medianos de linux aunque no domino muchos comandos del shell aun, bueno esa es mi inquietud y quien mejor que ustedes para explicarme o darme dicha información estoy descargando debian amd64 y ia64 ya que mi procesador es un dual core x64 soy fanatico de debian desde el primer día que lo use en un infocentro aquí en Venezuela (como ustedes saben Venezuela esta apollando el software libre su uso y desarrollo aunque en este momento los guru en GNU/linux, usuarios y fanaticos tenemos una batalla contra microsoft mocosoft que quiere implantar como estandar de su formato de archivo de documento .doc que viola el decreto 3390) debian es un sistema muy completo y con una multitud de paquetes de software que quiero trabajar mientras escribo este correo estoy leyendo el manual de debian amd64 soy estudiante de informatica y tambien me ofresco como colaborador pero ojo primero lo primero quiero aprender a usar debian y por lo tanto mi prioridad es instalarlo actualmente uso windows xp (propietario hasta las metras), espero en unos 3 años ser ingeniero en informática pero por desgracia los softwares que he usado todos son bajo windows claro uso software libre en windows pero no es lo mismo que usar un sistema GNU/linux y ustedes más que yo lo saben, bueno creo que para una simple pregunta escribí demasiado Espero una respuesta y toda la información sobre software libre para mi es de alto interés. talvez esta busqueda te sirva? http://www.google.cl/linux?hl=esq=Intel++d101gccbtnG=Buscarmeta= Saludos Gracias por todo Alejandro García C.I. 18044972 Venezuela, Edo Aragua Telf 058-0246-5211677 los ceros antes del 5 y del 2 creo que no van Cel 058-0414-5620069 los ceros antes del 5 y del 4 creo que no van Nota: En dado caso he dado toda mi información por si quieren contactarme de otra forma a parte del uso del correo electrónico o E-mail. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- usuario linux #274354 normas de la lista: http://wiki.debian.org/NormasLista
Re: Como hacer funcionar Facturalux en debian
Angel Guadarrama escribió: */José Manuel (EB8CXW) [EMAIL PROTECTED]/* escribió: Hola a [EMAIL PROTECTED]: He instalado facturalux para etch. He buscado en google como instalarlo, he seguido los pasos de esta página: http://www.guadalinex.org/guadapedia/index.php/Receta:_C%C3%B3mo_instalar_FacturaLux_(Guadalinex_2004) Pero no funciona, al arrancar facturalux, aparece una ventana, que me pide usuario y palabra de paso, como usuario pongo el creado, en las notas de la página anteriormente mencionada y como palabra de paso una inventada (ya que no se a que se refiere), le doy a siguiente y me aparece otra ventana con lo siguiente: Cargando driver de la base de datos... Ok Comprobando conexión a la base de datos... Error: Pulse en Atrás y compruebe su configuración. Y ya no se seguir. Me podéis indicar que estoy haciendo mal y como corregirlo, gracias. -- Un saludo, José Manuel Gran Canaria/España Si vas a escribir.. piensa en esto: no digas nada que no sea mas precioso que el silencio!!! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] El facturalux trabaja con un motor de base de datos postgresql. Entonces lo que te debe faltar es crear la base de datos y el usuario de la base de datos EN POSTGRESQL ;). Espero te oriente mi respuesta. Angel Guadarrama T.S.U Telecomunicaciones Linux user #411520 http://mx.groups.yahoo.com/group/Linux-Emprevet/ ¡Sé un mejor ambientalista! Encontrá consejos para cuidar el lugar donde vivimos en: http://ar.yahoo.com/promos/mejorambientalista.html Hola a [EMAIL PROTECTED]: Ángel, gracias por contestar, tengo supuestamente creado un usuario y una base de datos, de esta manera (que me indicaba en la dirección que indique): # /bin/su postgres -c /usr/bin/createuser -D -A mi_usuario # /bin/su postgres -c /usr/lib/postgresql/8.1//bin/createdb facturalux Cuando creo el usuario no me da la opción de poner clave. Pero sigue sin arrancar el programa. -- Un saludo, José Manual Gran Canaria/España Si vas a escribir.. piensa en esto: no digas nada que no sea mas precioso que el silencio!!!
Re: Como hacer funcionar Facturalux en debian
hoock escribió: El Fri, 24 Aug 2007 11:20:37 -0300, Angel Guadarrama escribió: José Manuel (EB8CXW) [EMAIL PROTECTED] escribió: Hola a [EMAIL PROTECTED]: He instalado facturalux para etch. He buscado en google como instalarlo, he seguido los pasos de esta página: http://www.guadalinex.org/guadapedia/index.php/Receta:_C%C3%B3mo_instalar_FacturaLux_(Guadalinex_2004) Pero no funciona, al arrancar facturalux, aparece una ventana, que me pide usuario y palabra de paso, como usuario pongo el creado, en las notas de la página anteriormente mencionada y como palabra de paso una inventada (ya que no se a que se refiere), le doy a siguiente y me aparece otra ventana con lo siguiente: Cargando driver de la base de datos... Ok Comprobando conexión a la base de datos... Error: Pulse en Atrás y compruebe su configuración. Y ya no se seguir. Me podéis indicar que estoy haciendo mal y como corregirlo, gracias. -- Tienes instalado mysql server ? Hola a [EMAIL PROTECTED]: Hoock, gracias por contestar, solo tengo postgres-8.1, que es la que se instala al instalar Facturalux. -- Un saludo, José Manuel Gran Canaria/España Si vas a escribir.. piensa en esto: no digas nada que no sea mas precioso que el silencio!!!
Re: Como hacer funcionar Facturalux en debian
Alwar escribió: El 25/08/07, hoock [EMAIL PROTECTED] escribió: El Fri, 24 Aug 2007 11:20:37 -0300, Angel Guadarrama escribió: JosÃ(c) Manuel (EB8CXW) [EMAIL PROTECTED] escribió: Hola a [EMAIL PROTECTED]: He instalado facturalux para etch. He buscado en google como instalarlo, he seguido los pasos de esta página: http://www.guadalinex.org/guadapedia/index.php/Receta:_C%C3%B3mo_instalar_FacturaLux_(Guadalinex_2004) Pero no funciona, al arrancar facturalux, aparece una ventana, que me pide usuario y palabra de paso, como usuario pongo el creado, en las notas de la página anteriormente mencionada y como palabra de paso una inventada (ya que no se a que se refiere), le doy a siguiente y me aparece otra ventana con lo siguiente: Cargando driver de la base de datos... Ok Comprobando conexión a la base de datos... Error: Pulse en Atrás y compruebe su configuración. Y ya no se seguir. Me podéis indicar que estoy haciendo mal y como corregirlo, gracias. -- Tienes instalado mysql server ? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] En usuario y palabra de paso o password tienes que poner el usuario y password de un usuario con acceso a la base de datos que tengas, ya sea postgre sql o mysql, ten cuidado que en la ventana de acceso tiene un boton que despilega la pantalla de conexion al servidor, y hay un driver que es sqllite para no instalar un servidor entero. Hola [EMAIL PROTECTED]: Alwar, gracias por contestar, ya conteste a Ángel, que había creado un usuario y una base de datos dentro de postgresql, y que no me dio opción a ponerle calve, Al arrancar Facturalux le pongo como usuario el que cree y la base de datos la que cree, en la palabra de paso es obligatorio poner algo y pongo una inventada. pero sigue igual. -- Un saludo, José Manuel Gran Canaria/España Si vas a escribir.. piensa en esto: no digas nada que no sea mas precioso que el silencio!!!
Re: Scanner en Debian
Hola Yo compre la HP 3180. Anda todo, sin problemas y basta con bajar y correr el driver desde la pagina de HP y listo.Es puerto USB. On 8/24/07, Exal de Jesus Garcia Carrillo [EMAIL PROTECTED] wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Em quinta, 23 agosto 2007, Alejandro Santos escreveu : ¿Alguien de esta lista utiliza algun Scanner en Debian? Si. ¿Qué marca y modelo es? HP Scanjet 4070 Phothosmart. ¿Qué interfaz utiliza, USB, Paralelo, SCSI, etc? USB. ¿Funciona correctamente con Sane? Así es. ¿Que experiencias tuvieron al momento de instalarlo, configurarlo y utilizarlo? Fue muy sencillo, solo tuve que bajarme una bola tar que ronda por internet con los controladores. . -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Processed by Mailcrypt 3.5.8+ http://mailcrypt.sourceforge.net/ iD8DBQFGzv+joZmxoVJRtGIRAvd7AJ0ZtheUQEOsRCx+0+je/dPjiANbWgCgm+mx fr3KgdvsbTghQ0C1UyKg6r8= =NlfT -END PGP SIGNATURE- -- Luis A. Garay Castro Visite:www.2libros.com Usuario Registrado Linux # 350693 -- http://counter.li.org
Re: online data-internet
Har du provat Skype? (duh) [EMAIL PROTECTED] wrote: hej jag har en projekt.det handlar om att mikrofonen fångar signalen .signalen passerar ad-omvandlare och låg pass filter. efter detta mättes signalen av data .så behöver det ett mätprogram. sedan skickas signalen till internet. vi behöver en web server program. jag undrar om ni har mätprogram eller web server program? jag har en fråga till :vad är det skillnaden mellan fri operativsystem och vanlig operativ system? web server programet som behövs är GNU/Linux. mvh HAmid Är detta ett 10 poängs projekt? (isf återuppfin inte videon, lr hjulet för den delen) Bara att installera Linux, och få allt i det att funkar, borde vara typ minst 5 poäng (för den helt oinvigda). Minst. Jag tror inte ni behöver någon web -server, för att streama ljud. (protokoll rtsp:// Realplayer hanterar detta.) http://en.wikipedia.org/wiki/Real_Time_Streaming_Protocol Skriver jag: [EMAIL PROTECTED]:~$ apt-cache search stream server | wc -l 117 Alltså. (förmodligen simmar ni på fördjupt vatten... men det skadar ju inte att åtminstone få fötterna blöta Hamid?) Själv lyssnar jag på Realtime Quicktime Youtube och vad det kan vara, med Mplayer (vilket jag har kompilerat med alla tänkbara kodex). Mätprogram? (endel instrument har oxå ett PC interface, vet inte. Fråga mig inte hur man får ett Excel- dokument från en mick ) -- Mvh, Per Blomqvist Web: http://phoohb.shellkonto.se Telnr: +46 70-3355632 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Baixando e Instalando o Nvu
Em 24/08/07, Deusemar Junior[EMAIL PROTECTED] escreveu: [...] e vem um arquivo Nvu.cnr num sei como instalar isso, e procurei um arquivo .deb ou compactado não encontrei ... O Nvu não está oficialmente empacotado para Debian. Como posso baixar e instalar o nvu ? Você pode tentar um repositório não oficial[0]. [0] http://www1.apt-get.org/search.php?query=nvusubmit=Submit+Queryarch%5B%5D=i386arch%5B%5D=all -- Júnio José Software, serviços e consultoria: http://www.sintectus.com GNU/Linux: http://www.debian.org Eu: http://junio.unidados.com.br
Re: Wine travando a máquina (parte 2)
Em Fri, 24 Aug 2007 12:38:20 -0300 Maxwillian Miorim [EMAIL PROTECTED] escreveu: Sobre o problema ser com o X, não tem nada nos logs? Da uma olhada em /var/log/Xorg.0.log As coisas suspeitas são: No início do arquivo: (WW) The directory /usr/X11R6/lib/X11/fonts/misc does not exist. Entry deleted from font path. Na última linha: Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list! Seria este o problema? -- Sávio M Ramos Arquiteto, Rio, RJ Usuário Linux desde 2000 www.debian.org
Re: Baixando e Instalando o Nvu
Deusemar Junior escreveu: Olá Pessoal, Tou tentando instalar o NVU, no synaptic e apt-get não vem..., fui na pagina www.nvu.com http://www.nvu.com para fazer donwload direciona pra outro site o http://www.cnr.com/product/productOverview.seam?productId=17970actionMethod=productGrid.xhtml%3AproductDetails.selectProductconversationId=36075 http://www.cnr.com/product/productOverview.seam?productId=17970actionMethod=productGrid.xhtml%3AproductDetails.selectProductconversationId=36075 e vem um arquivo Nvu.cnr num sei como instalar isso, e procurei um arquivo .deb ou compactado não encontrei ... Como posso baixar e instalar o nvu ? Desde já agradeço a ajuda... Deusemar Junior Sempre Debian Olá, Na minha página tem umas dicas e tradução: www.juniorpolegato.com.br -- Atenciosamente, Junior Polegato Um peregrino de problemas; Um pergaminho de soluções! Página Profissional: http://www.juniorpolegato.com.br -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Baixando e Instalando o Nvu
On 8/25/07, Júnio José [EMAIL PROTECTED] wrote: Em 24/08/07, Deusemar Junior[EMAIL PROTECTED] escreveu: [...] e vem um arquivo Nvu.cnr num sei como instalar isso, e procurei um arquivo .deb ou compactado não encontrei ... O Nvu não está oficialmente empacotado para Debian. E está descontinuado. O projeto (ou fork) foi para kompozer, que apesar do K não tem QT: http://www.kompozer.net/ Baixa a versão do ubuntu empacotado para Ubuntu Edgy 32 bits - 0.7.7 http://www.getdeb.net/release.php?id=332 Abçs, Zandre.
Re: problemas com o roteamento da internet
me surgiram algumas duvidas, tipo, vejo que voces colocam no mascaramento a faixa de ip. poderia ser essa a causa? eu estava conversando com um um cara e ele me falou que poderia ser la nas acl's, tipo: #Descrição das ACLs acl all src 0.0.0.0/0.0.0.0 acl manager proto cache_object acl localhost src 127.0.0.1/255.255.255.255 #acl SSL_ports port port 443 563 acl Safe_ports port 80 # http acl Safe_ports port 21 # ftp acl Safe_ports port 443 563 # https, snews acl Safe_ports port 70 # gopher acl Safe_ports port 210 # wais acl Safe_ports port 280 # http-mgmt acl Safe_ports port 488 # gss-http acl Safe_ports port 591 # filemaker acl Safe_ports port 777 # multiling http acl Safe_ports port 901 # swat acl Safe_ports port 1025-65535 # portas altas acl purge method PURGE que eu deveria por uma acl para a rede 192.168.1.0/24 outra coisa, os clientes, tem que estar usando qual dns? eles estavam usando o dns do hub (192.168.1.145) ou eles tem que usar um dns publico (tipo 201.10.1.2). os clientes usavam antes o dns do hub, e queria tentar evitar mexer neles. PS: RESOLVIDO EM PARTE. adicionei a faixa de ip nas acl's, mas tive que alterar o dns (coloquei o 201.10.1.2), mas eu ainda procuro uma resposta pra tentar usar o dns do hub(192.168.1.145) .. Em 25/08/07, jefferson alexandre [EMAIL PROTECTED] escreveu: Marcio, tente fazer o masquerade antes de redirecionar para squid. iptables -t nat -A POSTROUTING -o eth0 -s 192.168.1.0/24 -j MASQUERADE iptables -t nat -A PREROUTING -i eth1 -p tcp --dport 80 -j REDIRECT --to-port 3128 Tem um problema aí. O iptables, assim como o squid, lê as regras sequêncialmente. Se você colocar a regra de masquerade antes do redirect, as requisições não passarão pelo proxy =) Agora, umas perguntas para o Márcio: Qual a tua política default de firewall? Você está aceitando as conexões que voltam para a porta 3128? Lembre-se que os servidores externos tem que devolver a requisição ao squid, e você deve explicitar isto no firewall caso utilize uma política restritiva. [ ] ' s -- Linux User #328969 Linux System Administrator www.midstorm.org/~jalexandre/blog -- linux user nº 432194 Eu sou livre e você?
Re: xfce4
Marcos Ferreira escreveu: Olá Senhores! Instalei o debian somente em modo texto e depois acrescentei o xfce4 à instalação. Fiz dessa forma para fazer uma instalação mais seletiva, pois o equipamento não é de última geração. Gostaria de saber como eu faço para que o xfce carregue automaticamente após o boot e o usuário comum possa desliguar o computador a partir do menu gráfico do xfce. Pois a opção desligar aparece, mas está desabilitada. obrigado, Marcos olha Marcos, quanto ao problema de carregar o xfce após o boot, eu resolvi instalando o gdm, não sei se é a melhor saída. quanto ao problema de desligar com o usuário comum eu não tive este problema ele desliga com o meu usuário normal mesmo. -- Ricardo Esdra linux user n° 418107 A Liberdade é uma Questão de Escolha... -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Wine travando a máquina (parte 2)
Em 24/08/07, Sávio Ramos[EMAIL PROTECTED] escreveu: Em Fri, 24 Aug 2007 12:38:20 -0300 Maxwillian Miorim [EMAIL PROTECTED] escreveu: Sobre o problema ser com o X, não tem nada nos logs? Da uma olhada em /var/log/Xorg.0.log As coisas suspeitas são: No início do arquivo: (WW) The directory /usr/X11R6/lib/X11/fonts/misc does not exist. Entry deleted from font path. Na última linha: Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list! Seria este o problema? Não. A menos que você leia em russo. Você já rodou o memtest ?? -- Thadeu Penna Prof.Associado - Instituto de Física Universidade Federal Fluminense http://profs.if.uff.br/tjpp/blog
Re: Varios logons
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 24-08-2007 22:20, Josevan Gondim wrote: Hoje, o meu smb.conf estah assim: logon script = logonscript.bat No arquivo, logonscript.bat, assim: net use h: \\server\homes net use g: \\server\programas net use j: \\server\grupo net use t: \\server\temporario Alguns usuarios, tem seus mapeamentos sendo acrescidos de mais algum, criados depois conforme necessidade. O que eu tenho feito hoje eh criar o mapeamento no smb.conf, normalmente, e depois, fazer o mapeamento manual em cada maquina. O que eu queria era, deixar o logonscript para todos os usuarios, inclusive os que terao modificacoes e mais os individuais. Eu estou querendo que fique assim: No smb.conf logon script = logonscript.bat , U%.bat No logonscript.bat arquivo normal, conforme acima. No usuario.bat arquivo normal [+] net use s: \\server\mapeamento_novo A minha unica duvida eh no arquivo smb.conf se a linha pode ficar do jeito acima. Nos testes que fiz, nao funcionou. Exato, você tem que definir um script de logon. Por que você não utiliza um CALL para um modelo padrão? Você vai ter o todomundo.bat com o que você quer, e todos os seus usuários vão chamar o todomundo.bat e você vai executar as diferenças que precisar por usuário, assim: x.bat: @CALL todomundo.bat net use para o usuario X Com isso você especifica o logon script para %U.bat Abraço, - -- Felipe Augusto van de Wiel (faw) Debian. Freedom to code. Code to freedom! -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFG0LALCjAO0JDlykYRAgvdAJ9LXuxfkvp6xnZE4knkgZfmJP2BMACfS/uP uewFGGzTyE86utyRF8S1fhA= =HbCQ -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: .htpasswd
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 24-08-2007 17:18, Anderson Roberto Grella wrote: Mais uma questão... depois de minha anterior sobre o apache2 com ssl. Tenho um diretório protegido por senha com .htpasswd e .htaccess. Assim que o usuário digita o login e senha, tem o acesso liberado. Eu gostaria de dar a segurança de que se ele esquecesse o browser aberto, ninguém acessaria aquela área da qual ele tem a senha. Para isso, eu gostaria deixaria um link de script em alguma página para ele sair do sistema (como um logout), permitindo o acesso até mesmo por outro usuário. Isso é possível com essa senha em .htpasswd ou ele teria mesmo que fechar o browser? (uso scripts em Perl) Isso é autenticação de cabeçalho HTTP, ou seja, afeta direto o navegador, uma forma de fazer um pseudo-logout é forçar um login errado em outro local, mas isso depende do cliente, é ele quem tem as credenciais de acesso, você pode trocar a senha do cara no servidor após um tempo para bloquear o acesso (só quero ver como fazer para que ele acesse novamente numa próxima oportunidade). Sendo assim, é preciso fechar o navegador, ou limpar as credenciais que ele tem armazenado (e isso varia de navegador para navegador). O pessoal do trac tinha algum código para permitir esse logout, mas me lembro que ainda estava em testes. Abraço, - -- Felipe Augusto van de Wiel (faw) Debian. Freedom to code. Code to freedom! -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFG0LGWCjAO0JDlykYRAuJ/AKDN4G+DyyjjdpNqwuzYwmeZak3a5ACfax/w dYSW18VhFGIwry+AwSib/O0= =w4GF -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: apache2 com ssl
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 24-08-2007 17:11, Anderson Roberto Grella wrote: Olá a todos! Estou com um probleminha... Cada vez que ligo o computador, o servidor apache não funciona com o suporte ao ssl. Preciso dar um force-reload para que passe a funcionar. Antes disso, o navegador mostra a mensagem A conexão para host.tal.tal.no-ip.org:9998 foi interrompida abruptamente. Alguma informação pode ter sido transferida. Uso a porta 9998 no lugar da 443, por ser speedy da Telefônica. Antes de recarregar o apache, somente funcionam portas 80 e (que uso para quem acessa de fora). Após recarregar o apache, tudo funciona normalmente - portas 80 e , e 443 e 9998. Você poderia mandar mais detalhes? Versões do Debian e do Apache, partes relevantes dos arquivos de configuração, o que aparece nos logs... Abraço, - -- Felipe Augusto van de Wiel (faw) Debian. Freedom to code. Code to freedom! -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFG0LHpCjAO0JDlykYRAhlnAJ43k4wm1NC8MKvVp1pW7WOFNJElrwCglGAn k6Mi7RAt5DrBnG9SpMfjSxI= =TV1V -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: erro no SYSLOG
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 24-08-2007 15:20, Notetecnologia wrote: Boa tarde pessoal, gostaria de compartilhar com vocês e ver se alguem ja pegou esse problema, é o seguinte, fiz a instalação do mrtg e depois disso começou a aparecer no meu /var/log/syslog as seguintes linhas de erro: Aug 24 14:55:01 sistema /USR/SBIN/CRON[1708]: (root) CMD (if [ -x /usr/bin/mrtg ] [ -r /etc/mrtg.cfg ]; then env LANG=C /usr/bin/mrtg /etc/mrtg.cfg /var/log/mrtg/mrtg.log 21; fi) Aug 24 14:55:03 sistema CRON[1707]: PAM pam_putenv: delete non-existent entry; acquire { Aug 24 15:00:01 sistema CRON[1762]: PAM pam_putenv: delete non-existent entry; acquire { Aug 24 15:00:01 sistema /USR/SBIN/CRON[1763]: (root) CMD (if [ -x /usr/bin/mrtg ] [ -r /etc/mrtg.cfg ]; then env LANG=C /usr/bin/mrtg /etc/mrtg.cfg /var/log/mrtg/mrtg.log 21; fi) Isso mostra a execução de tarefas agendadas no CRON. sendo que toda a vez que o mrtg se atualiza ele da essa mensagem de erro, lembrando que os gráficos são gerados perfeitamente.. mas oque seria o PAM alguem ja pegou esse tipo de problema e conseguiria me ajudar?? Hmmm... PAM é o Pluggable Authentication Module. A linha de erro que você vê está dizendo que algo está errado com a estrutura das variáveis de ambiente que são utilizadas. Aqui tem um problema similar: http://www.webservertalk.com/archive306-2004-11-537427.html Em algum lugar (no CRON ou no PAM) tem uma definição de 'acquire' que parece estar no local errado. :-) Abraço, - -- Felipe Augusto van de Wiel (faw) Debian. Freedom to code. Code to freedom! -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFG0LRwCjAO0JDlykYRAk/vAJ4lTGBswJEGOyroJ+5PeT+TT/SOYQCfRy7t TtFkFOHzyVbZzl51uBGT+Cc= =beMd -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Problemas com índice em LDAP
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 23-08-2007 09:57, Edson Marquezani Filho wrote: Não, o número de usuários é pequeno, todos os registros (entre usuários, máquinas e grupos) não passam de 150. As consultas também não são muitas, embore eu esteja considerando a hipótese se algum outro processo estar fazendo consultas execessivas vezes. Se isso acontecer, com índices fracos, sua base quebra. [...] uniqueMember não aceita o tipo de índice pres. Eu peguei esse servidor já funcionando e ainda não conhece muito bem os detalhes de LDAP, por isso nem saberia te dizer porque não member ao invés de uniqueMember. Hmmm... na lista do qmail o pessoal tem uma frase um tanto quanto dura mas que reflete a realidade, se você não tem condições de responder tudo sobre a configuração deste servidor, você não deveria estar dando manutenção nele, ou seja, mude para uma plataforma que você domina ou solicite informações/documentação de quem gerou isso. É comum confundirem o uso do uniqueMember com o conceito de único, o que no caso do LDAP não é exatamente o mesmo, por isso, normalmente o que se quer usar é member e não uniqueMember, sendo assim, talvez você tenha que reestruturar seu DIT. O fato é que mesmo omitindo esse índice na configuração, e gerando a base do zero, a falta do índice continua a aparecer nos logs. Exato, se omitir alguém consulta usando ele e ele não existe. :) Notei, após enviar essa mensagem, que o índice nunca funcionou corretamente, desde sempre. Só pude pensar que o problema é com o próprio LDAP, que não está gerando o índice corretamente. A versão é a 2.2.13. Comece a pensar na reestruturação do DIT. Mas sinceramente, também não acredito que o problema de corrupção das bases tenha relação com isso. Você acha ? Acho. Mas eu não tenho todas as variáveis do cenário e se eu dissesse que o fato de na mesma semana duas pessoas aparecerem na lista do Debian reclamando do LDAP no RH indicaria problemas com o RH, iriam me chamar de xiita e dizer que eu defendo o Debian. :-) Desculpe, sei que essa é uma lista de Debian, e eu tenho servidores Debian também, com LDAP. Mas, nesse caso é um RHEL 4, não homologado (leia-se sem suporte, atualização, etc, etc). Sou plenamente contra, mas... GOTCHA. :-) O slapadd gera os índices sim, realmente é besteira rodar o slapindex logo em seguida. =/ É e não é... depende de como a base está operando. [...] Ok. Agradeço muito as informações, pode ter certeza que foram muito úteis. Como você sugeriu, fiz algumas mudanças e estou monitorando para ver se o problema volta a se repetir. Vou procurar a respeita na lista mencionada, que eu acredito ser a LDAP-L. É isso mesmo ? Eu me referia a openldap, a lista internacional. ;) A ldap-l é a nacional, também pode funcionar... Abraço, - -- Felipe Augusto van de Wiel (faw) Debian. Freedom to code. Code to freedom! -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFG0LauCjAO0JDlykYRApbaAJ993ESb9iIhEPT6DVC+LrIEwJcWhwCgqCfe Ao1IEtgqm4iepFdfefLa+yA= =eeZU -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Problemas ao compartilhar pasta em LMB (Samba)
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 23-08-2007 16:21, Fernando Faria Mariano wrote: Estou configurando um VPN aqui na empresa que vou tentar desenhar abaixo. O compartilhamento de arquivos é feito pelo samba PDC 192.168.0/24 | | LMB01 --- LMB02 192.168.1/24192.168.1/24 Esse desenho está estranho. Se LMB for Local Master Browser e você está tentando configurar dois LMBs na mesma faixa, então você vai ter problemas e dores de cabeça. A comunicaçao da VPN já está feita e funcionado corretamente. Porém o que preciso é compartilhar algumas pasta em LMB01 e LMB02 atribuindo permissoes para estas pastas obtidas a partir do usuário/grupo contidos no PDC (backend smbpasswd). Como você está propagando as informações? (pam_winbind?) Seguindo vários tutoriais na internet consegui com que os usuários e grupos fossem sincronizados entres os servidores (PDC e LMB). Como? :) O que acho estranho no comando acima que ele não exporta os grupo que utilizo no samba (por exemplo comercial, financeiro, service, que utilizo para permissao das pastas). É normal com o comando acima mostrar somente os grupos administrators e users? Não, aqueles comandos mostram usuários e grupos ligados ao NSS. Se você fizer o NSS enxergar o Samba via winbind aí sim é normal. Além disso, pode ser necessário usar 'net groupmap'. Uma curiosidade que tenho é quando vou dar permissão para uma pasta utilizando um usuário do PDC e um grupo do PDC também aparece a seguinte mensagem de erro: ka030:~# chown fernando:comercial /compart/service/ chown: `fernando:comercial': grupo inválido E com o comando abaixo consigo o retorno do sid do grupo... ka030:~# wbinfo -n comercial S-1-5-21-214148172-2739914296-731306159-3019 Local Group (4) Até aí tudo bem, ou seja, o grupo não aparece no NSS, por isso você não pode usá-lo fora do contexto do Samba, uma idéia é configurar de forma correta o winbind do nsswitch ou então adotar LDAP. Como posso fazer para aplicar permissoes em arquivos/pastas utilizando grupos do PDC??? Configurando os grupos para serem vistos pelo NSS. Ja com um grupo local e um usuario obtido do PDC o comando é executado com sucesso... ka030:~# chown fernando:root /compart/service/ Você também pode fazer esse xaxixo se você mantiver UIDs e GIDs idênticos. A minha principal necessidade é compartilhar algumas pastas nos LMB para economizar banda da minha VPN pois o arquivos mais pesados do setor corresponde devem ficar armazenados no proprio LMB porém a politica de segurança de acesso deve continuar. Redes SMB e políticas de acesso de segurança não costumam ficar muito bem na mesma frase. :-) De qualquer forma, há outras formas de compartilhar os arquivos _entre_ os servidores e depois compartilhar estas estruturas, uma delas é usar NFS, claro que é preciso tomar os cuidados necessários para compartilhar pontos de montagem NFS via Samba. A partir de qualquer estação de trabalho quanto tento acessar uma pasta compartilhada em LMB ao clicar no computador já aparece uma janela pedindo usuário e senha... e verificando alguns logs consegui o seguinte... Este log é escrito assim q tento acessar o LMB e não consegue validar a senha... [2007/08/23 12:16:15, 10] smbd/password.c:register_vuid(186) register_vuid: allocated vuid = 101 [2007/08/23 12:16:15, 10] smbd/password.c:register_vuid(277) register_vuid: (1,10003) KACHAN/fernando fernando KACHAN guest=0 [2007/08/23 12:16:15, 3] smbd/password.c:register_vuid(280) User name: KACHAN/fernandoReal name: Fernando Faria Mariano [2007/08/23 12:16:15, 3] smbd/password.c:register_vuid(301) UNIX uid 1 is UNIX user KACHAN/fernando, and will be vuid 101 [2007/08/23 12:16:15, 4] auth/pampass.c:smb_pam_start(459) smb_pam_start: PAM: Init user: KACHAN/fernando [2007/08/23 12:16:15, 4] auth/pampass.c:smb_pam_start(476) smb_pam_start: PAM: setting rhost to: 192.168.19.5 [2007/08/23 12:16:15, 4] auth/pampass.c:smb_pam_start(485) smb_pam_start: PAM: setting tty [2007/08/23 12:16:15, 4] auth/pampass.c:smb_pam_start(493) smb_pam_start: PAM: Init passed for user: KACHAN/fernando [2007/08/23 12:16:15, 4] auth/pampass.c:smb_internal_pam_session(630) smb_internal_pam_session: PAM: tty set to: smb/2239/101 [2007/08/23 12:16:15, 0] auth/pampass.c:smb_pam_error_handler(73) smb_pam_error_handler: PAM: session setup failed : Permission denied [2007/08/23 12:16:15, 4] auth/pampass.c:smb_pam_end(440) smb_pam_end: PAM: PAM_END OK. [2007/08/23 12:16:15, 1] smbd/session.c:session_claim(134) pam_session rejected the session for KACHAN/fernando [smb/2239/101] [2007/08/23 12:16:15, 1] smbd/password.c:register_vuid(310) Failed to claim session for
Re: Logrotate x mail.log
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 23-08-2007 09:44, Keny Hayakawa Schmeling wrote: Bom dia Estou com uma dúvida, por onde que os logs de email (/var/log/mail.*) são rotacionados? Eu tava olhando no logrotate e lá não tem nenhuma entrada para o mail.* /etc/cron.weekly/sysklogd Usa o savelog e faz a rotação dos arquivos semanalmente. Abraço, - -- Felipe Augusto van de Wiel (faw) Debian. Freedom to code. Code to freedom! -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFG0NkOCjAO0JDlykYRAimcAJ9fpKSAKraHRow0xUtZ1vemF1g9ngCgyHUC mweKlWOQ8e6E9sPRMa5cBnY= =aogJ -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Problemas com entrega de email ao Exim
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On 24-08-2007 18:19, ..:: S.e.r.i.a.L ::.. wrote: Estou tento um problema para entregar email a um servidor Exim de uma empresa X. Testei de dois servidores, um Exchange 2007,Domino e um Postfix Minha pergunta eh, qdo faço o telnet na porta 25 do MX aonde esta rodando o Exim, ele me retorna a seguinte msg: Isso realmente ficou muito confuso. Você disse que tinha dois servidores, disse que eles eram um Exchange2007, Domino e Postfix (que na minha conta são 3) e disse que quando acessa o Exim (que acabou de aparecer e portanto seriam 4) encontra um problema. [EMAIL PROTECTED] root]# telnet 200.xxx.xxx.xxx 25 Trying 200.xxx.xxx.xxx... Connected to 200.xxx.xxx.xxx. Escape character is '^]'. 220-mx.provedor.com.br http://220-mx.provedor.com.br ESMTP Exim 4.66 #1 Fri, 24 Aug 2007 16:49:31 -0300 220-We do not authorize the use of this system to transport unsolicited, 220 and/or bulk e-mail. Entao fiz um teste com o comando HELO LOCALHOST. o Exim negou. Desconectei e reconectei e fiz o teste com o comando EHLO LOCALHOST. - OK o servidor aceitou numa boa. Gostaria de saber, qual a razao do servidor Exim, estar negando as minhas conexoes quando dou o comando HELO LOCALHOST. Só olhando a configuração para ter certeza. Em linhas gerais (e como as bolas de cristal USB não funcionam muito bem) eu diria que deve ser uma das restrições de HELO/EHLO (provavelmente mal configurada). Como após o EHLO você deveria identifica a máquina ou domínio que está atuando como cliente, seria inteligente dizer que se você fazer HELO localhost você está mentindo, porque você não é o localhost, ou seja, a máquina que está executando o servidor SMTP (quer dizer, você estaria dizendo a verdade, já que todas as máquinas do mundo são localhost, mas na Internet e com DNS isso seria um tanto quanto estranho). Poderia ser também uma restrição de HELO, ou seja, o servidor só quer aceitar mensagens de EHLO, não que isso faça sentido, mas os caras do Hotmail têm usado configurações absurdas há anos e ainda estão no mercado dos webmails. :-) Por exemplo: http://www.debian-administration.org/articles/402 Abraço, - -- Felipe Augusto van de Wiel (faw) Debian. Freedom to code. Code to freedom! -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.6 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFG0N0DCjAO0JDlykYRArGfAJ4nkTKaVcvRd55rmpoj+m1W7XR4VACeNn9a vUvVKuzlQEZJxuhDhM8O17Y= =Fxlx -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: http URL filter
I am looking for a http URL filter for the gateway on my LANs, the basic requirement is: If the URL is in the blacklist, deny it and reply the user a page with No, we cannot let you pass. squid (transparent proxy) can do this job, but sometimes I do not want to configure a transparent proxy on the gateway. Hello Deephay, Have a look at SafeSquid (http://freshmeat.net/projects/safesquid/). It is a content filteing proxy and has a browser based GUI interface. It allows you to give a 'profiled' internet access to users. The SafeSquid Composite Edition is compatible with URL blacklist, and also has a feature 'Customizable Templates', which can be used to display customized html pages for deny events. It also has many advanced features for content filtering. Cheers
Re: http URL filter
I am looking for a http URL filter for the gateway on my LANs, the basic requirement is: If the URL is in the blacklist, deny it and reply the user a page with No, we cannot let you pass. squid (transparent proxy) can do this job, but sometimes I do not want to configure a transparent proxy on the gateway. Hello Deephay, Have a look at SafeSquid ( http://freshmeat.net/projects/safesquid/). It is a content filteing proxy and has a browser based GUI interface. It allows you to give a 'profiled' internet access to users. The SafeSquid Composite Edition is compatible with URL blacklist, and also has a feature 'Customizable Templates', which can be used to display customized html pages for deny events. It also has many advanced features for content filtering. Cheers
Re: Just flaming....
On Friday 24 August 2007 22:46, Ms Linuz wrote: http://www.microsoft.com/windowsserver/compare/default.mspx The first case study (Illinois) purportedly comparing Linux to Windows actually compares Notes+Groupwise+Windows to Windows and surprise surprise finds Windows is cheaper than Windows plus two others. Linux wasn't even involved other than the Illinois chief tech's admission that he hadn't a clue and was scared witless: CMS did not want to pursue a Linux-based system because it considered an open source system too risky to implement, So he goes out and wastes a fortune on Windows because he doesn't know how to do his job. The giant slurping sound you're hearing is Illinois taxes be sucked off to Redmond instead of going to build roads and schools in Illinois. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Possible LKM Trojan installed
Very easily. The very first thing the trojan did after installing itself was to call home. Home has the address of the trojaned machine. Home can then check up on its trojan and maintain it and activate it or repair it as necessary. On Fri, 24 Aug 2007, Mike Bird wrote: On Friday 24 August 2007 17:59, Jude DaShiell wrote: how these trojans survive is by surviving operating system reinstalls. The better trojans hide themselves in several out of the way places on disks and after adjacent areas have got their new files copy themselves back into the areas where no more disk wiping by the installer is about to happen. Trojan file names get changed too whenever this happens too. How would a trojan be activated to copy itself back if block zero was wiped, a new partitition table was installed, and new file systems created? Yes, an image of a trojan may still exist in the unused sectors of the first track of a partition, but how could it be activated? --Mike Bird -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: cannot logoff/shutdown properly
On Fri, Aug 24, 2007 at 21:05:27 -0400, Manu Hack wrote: On 8/24/07, Florian Kulzer wrote: On Fri, Aug 24, 2007 at 10:46:13 -0400, Manu Hack wrote: On 8/24/07, Florian Kulzer wrote: On Thu, Aug 23, 2007 at 22:38:27 -0400, Manu Hack wrote: On 8/23/07, Florian Kulzer wrote: On Wed, Aug 22, 2007 at 01:25:47 -0400, Manu Hack wrote: On 8/21/07, Florian Kulzer wrote: On Tue, Aug 21, 2007 at 12:29:53 -0400, Manu Hack wrote: I finally have the chance to look at /var/log/Xorg.0.log in recovery mode but it didn't have anything with (EE) or (WW). And in recovery mode, I can shutdown properly with shutdown -h now. [...] This still looks like a crash of the graphics driver during mode switching to me. (Did you also try this with the vesa driver?) If you are at the graphical login screen, can you switch to a terminal with CTRL + ALT + F1 (or F2, ..., F6)? I tried vesa, but the screen is not very stable and I can logoff once and then when I login again, I couldn't log off like I was using i810. I would still like to know whether your system hangs if you try to switch to a terminal without shutting down gdm. If I have a graphical login prompt and press CTRL + ALT + Back I can go to a text mode login prompt but immediately I will go back to the graphical login prompt. I think that is the default behavior of gdm: It respawns X if X is killed suddenly. So maybe this is not related to the graphics driver after all. If you cannot find any further clues in /var/log/syslog /var/log/Xorg.0.log ~/.xsession-errors (after a crash and a reboot into single-user mode) then I don't know where to look next. If you have another computer on the same LAN then it might be worthwhile to try if you can still log in remotely with ssh after the problematic system freezes. -- Regards,| http://users.icfo.es/Florian.Kulzer Florian | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Any way to stop dist-upgrade from upgrading tetex to texlive
- Tong - [EMAIL PROTECTED] writes: Is there any way to stop dist-upgrade from upgrading tetex to texlive? I just upgraded from Etch to Lenny, and have loads of things to fix, keeping tetex from upgrading to texlive will sure ease the transition for the moment. You should put your tetex packages on hold: # aptitude hold tetex-base tetex-bin tetex-extra Then try aptitude -s dist-upgrade. If that would still pull in texlive, you are bitten by bug #434731: aptitude will ignore the hold if a package that is _not_ put on hold can only be upgraded by upgrading a package that _is_ on hold. But hopefully that will not be the case. The migration to texlive will pull in many hundred of megabytes if you have tetex-extra installed. In that case I would recommend to use aptitude's TUI to uninstall it and manually select the texlive packages you want (look in the dependencies of texlive-full). This is how I managed the transition without pulling in too much stuff. Hope this helps, Sven -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: boot error
On Fri, Aug 24, 2007 at 20:46:22 -0400, Frank McCormick wrote: On Fri, 24 Aug 2007 15:07:49 +0200 Florian Kulzer wrote: n Thu, Aug 23, 2007 at 21:25:29 -0400, Frank McCormick wrote: For the past few weeks I've been seeing an error message fly by (doesn't seem to affect anything) and I curious what's going on. the message is: dbus unknown username haldemon in message bus configuration file. It should be haldaemon. (I assume this is just a typo since you probably could not copy/paste the message directly.) The relevant configuration file is /etc/dbus-1/system.d/hal.conf: $ grep -A2 haldaemon /etc/dbus-1/system.d/hal.conf !-- Only root or user haldaemon can own the HAL service -- policy user=haldaemon allow own=org.freedesktop.Hal/ /policy I have no hal.conf in that directory ?? [...] The post-installation script of the hal package is supposed to create the haldaemon user and group if they do not exist. You can check if the user exists: $ grep hal /etc/passwd and no hal or haldaemon user??? Then maybe you are not using the hal package at all. What is the output of dpkg -l hal\*? -- Regards,| http://users.icfo.es/Florian.Kulzer Florian | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: USB..... detected not working since upgrade...
On Friday 24 August 2007 18:32, Bert Schulze shared this with us all: --} On 24 Aug., 08:40, Charlie [EMAIL PROTECTED] wrote: --} The USB ports are detected, and the lights go on and someone is home. Then the --} lights go off as every USB port leaves. --} --} tail /var/log/messages and unplug then plug them in, the lights go on for a --} moment, then out and leaves these messages:- --} --} Aug 24 16:29:36 taogypsy kernel: usb 5-1: USB disconnect, address 6 --} Aug 24 16:29:36 taogypsy kernel: usb 5-1.4: USB disconnect, address 7 --} Aug 24 16:29:38 taogypsy kernel: usb 5-1: new high speed USB device using --} ehci_hcd and address 8 --} Aug 24 16:29:38 taogypsy kernel: usb 5-1: configuration #1 chosen from 1 --} choice --} Aug 24 16:29:38 taogypsy kernel: hub 5-1:1.0: USB hub found --} Aug 24 16:29:38 taogypsy kernel: hub 5-1:1.0: 4 ports detected --} Aug 24 16:29:39 taogypsy kernel: usb 5-1.4: new full speed USB device using --} ehci_hcd and address 9 --} Aug 24 16:29:39 taogypsy kernel: usb 5-1.4: configuration #1 chosen from 1 --} choice --} --} Anyone with any ideas? --} --} TIA --} Charlie --} --} As i can see you are using a hub. My first opinion is theres not --} enough power? Which would be right if the hub is bus powered and not --} powered by an external ac adapter. --} Did you try it on other boxes and does it work there? Everything worked on this laptop computer Acer Aspire 3614WLCi using Debian testing till the last couple of upgrades. Hub Scanner etc, works on an older Acer 3650 laptop, with Debian Etch, and in windows on that machine. You might be correct suggesting not enough power.. The scanner doesn't do anything with its carriage and there are no lights working in it when plugged in. I have changed from an external USB to Serial cable dial up modem. To an Ethernet satellite self powered modem. The dialup modem plugged into the bus powered hub ensured the USB system of the computer was constantly activated. The light was on all the time, because the modem was connected and working. Now the hub light goes on and stays on only when I have something like one of my external self powered DVD drives plugged in. This must be constantly demanding of the computers USB system through the bus powered hub. So the hub is activated and lights on. But when nothing that requires constant surveillance [turned off printer] is connected to the hub. The light stays out. My system sees, recognises and labels my scanner correctly. But the scanner doesn't demand power just by being plugged in. [EMAIL PROTECTED]:~$ lsusb Bus 003 Device 002: ID 04a9:220e Canon, Inc. CanoScan N1240U/LiDE 30 So the computer USB system doesn't kick in. Even when Xsane is evoked. It says it is getting a preview, but the preview pane is black, and the lights and carriage in the scanner remain off and stationary, respectively. If I plug in an external DVD drive, the hub is activated, the light goes on, the DVD reads and writes, and if I leave the external DVD drive plugged in, the hub lights still on and plug the scanner into the hub. The scanner works as described above. No lights, no carriage animation. If I leave the hub working by leaving the external DVD drive plugged in, and use another USB port ***directly*** to the motherboard of the computer [in the computers side] The scanner still doesn't have any lights working or carriage animation. I think it may be a power issue, but this was never the case previously? It's an interesting situation which is new to me. taogypsy:~# lsusb Bus 003 Device 001: ID : Bus 005 Device 002: ID 05e3:0606 Genesys Logic, Inc. Bus 005 Device 001: ID : Bus 004 Device 001: ID : Bus 002 Device 001: ID : Bus 001 Device 001: ID : I'm not certain that the USB system should be activating the hub [lights on] if there is nothing demanding it's power? I think I like it better the way it is now, but then how do I get the scanner working? Too many questions and more questing required. Thank you for your interest and suggestion. Charlie -- Registered Linux User:- 329524 +++ Write while the heat is in you. The writer who postpones the recording of his thoughts uses an iron which has cooled to burn a hole with. He cannot inflame the minds of his audience. .Henry David Thoreau Debian - Just the best way to do magic. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: hda: DMA timeout error, is it a problem ?
Douglas A. Tutty wrote: On Fri, Aug 24, 2007 at 08:12:28PM +0200, Shams Fantar wrote: Douglas A. Tutty wrote: Try shutdown, disable DMA in the bios, and reboot into single-user mode (avoids mounting the drive rw). See if the messages show up in dmesg. Then reboot into normal mode and check syslog for that boot (ignore previous boots). There are the same messages. The thing about S.M.A.R.T. If it says the drive is failing, then it is. If it says the drive is OK then it may be, or not. Try booting either the install disk in rescue mode or a live CD so that the drive is totally unmounted. Run a full filesystem check with read/write badblocks check. I'm not thinking you'll find bad blocks, but it forces the drive firmware to verify each block of the disk platter. Check the syslog of the live or install CD to see if you have the same errors. Yes, there are still the same messages. Then reboot the normal system and check syslog again. Then start another S.M.A.R.T. long test and wait its recommended time and review the result. The new long test available at http://jumble.snurf.info/desktop/hard-disk So is it dead? According to SMART, the drive is fine. If the filesystem badblocks check was OK then that seems to be OK too. So I don't know why you're having DMA errors. Hopefully someone who knows more about SMART and the ide driver can shed some light. Perhaps its a driver issue. Doug. Okay. -- Shams Fantar (http://snurf.info) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: aptitude unintuitive behaviour (bug resolving dependencies?)
On Fri, Aug 24, 2007 at 05:29:40PM +0200, Klaas Gadeyne wrote: Do you get different results if you pass --without-recommends as a command-line option? Yes, that seems to do the trick! [...] So one of the recommends must be depending on or recommending apache 1.3, right? I've played a bit around with apt-cache --recurse depends but I couldn't figure out the culprit (at least not in 3 minutes :-) It seems like I might to add the --without-recommends into apt.conf. If you are in interactive mode you should be able to unmark a recommend. I think you can achieve the same on command-line if you pass 'notwantedpackage-'. Regards, Andrei -- If you can't explain it simply, you don't understand it well enough. (Albert Einstein) signature.asc Description: Digital signature
Re: Any way to stop dist-upgrade from upgrading tetex to texlive
Hi. - Tong -, 25.08.2007 05:51: On Sat, 25 Aug 2007 02:03:42 +0200, Mathias Brodala wrote: Is there any way to stop dist-upgrade from upgrading tetex to texlive? See the manpage of aptitude and look for hold. […] Please be *responsible* with what you said. Do you know that your hold does not work? Nope. Only heard about it multiple times and thought it might be the solution here. I never used it myself. If you are not sure yourself, shouldn't you at least test it before blunt it out? I don’t use aptitude. If you want to help, then give *real* help, not giving false directions to waste other's time. You just could take my hint for further research if it doesn’t work directly. (You could have come up with the idea to put everything tex-related on hold, for example.) Regards, Mathias -- debian/rules signature.asc Description: OpenPGP digital signature
Re: ipod mount error
OT and hijacking my own thread... Does anybody understand the error I am getting from gpod: Failed to remove watch SOunds like a text message from a pickpocket to me. But it seems to indicate a problem that prevents unmounting/ejecting the ipod. I suppose, therefore that I am risking corrupting the database if I unplug it anyway. TIA -- richard -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: aptitude unintuitive behaviour (bug resolving dependencies?)
On Sat, Aug 25, 2007 at 12:34:32PM +0300, Andrei Popescu wrote: On Fri, Aug 24, 2007 at 05:29:40PM +0200, Klaas Gadeyne wrote: So one of the recommends must be depending on or recommending apache 1.3, right? I've played a bit around with apt-cache --recurse depends but I couldn't figure out the culprit (at least not in 3 minutes :-) It seems like I might to add the --without-recommends into apt.conf. If you are in interactive mode you should be able to unmark a recommend. I think you can achieve the same on command-line if you pass 'notwantedpackage-'. I don't know if that will work. Unless you tell aptitude to not tread recommends as strong depends, it may automatically resolve these dependancies. However, in the CUI, you can select the option to not treat recommends as strong depends. When you select a pacakge for installation that has recommends, they won't be marked then for installation. When you hit 'g'o the first time, aptitude presents a list of what it wants to do but it also presents the list of packages that are recommended and suggested by packages that are marked for installation. You can then select from these. Doug. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: boot error
On Sat, 25 Aug 2007 10:23:54 +0200 Florian Kulzer [EMAIL PROTECTED] wrote: On Fri, Aug 24, 2007 at 20:46:22 -0400, Frank McCormick wrote: On Fri, 24 Aug 2007 15:07:49 +0200 Florian Kulzer wrote: n Thu, Aug 23, 2007 at 21:25:29 -0400, Frank McCormick wrote: For the past few weeks I've been seeing an error message fly by (doesn't seem to affect anything) and I curious what's going on. the message is: dbus unknown username haldemon in message bus configuration file. It should be haldaemon. (I assume this is just a typo since you probably could not copy/paste the message directly.) The relevant configuration file is /etc/dbus-1/system.d/hal.conf: $ grep -A2 haldaemon /etc/dbus-1/system.d/hal.conf !-- Only root or user haldaemon can own the HAL service -- policy user=haldaemon allow own=org.freedesktop.Hal/ /policy I have no hal.conf in that directory ?? [...] The post-installation script of the hal package is supposed to create the haldaemon user and group if they do not exist. You can check if the user exists: $ grep hal /etc/passwd and no hal or haldaemon user??? Then maybe you are not using the hal package at all. What is the output of dpkg -l hal\*? dpkg -l hal\* Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Installed/Config-files/Unpacked/Failed-config/Half-installed |/ Err?=(none)/Hold/Reinst-required/X=both-problems (Status,Err: uppercase=bad) ||/ Name Version Description ++ +--- pn hal none (no description available) pn hal-device-manager none (no description available) pn hal-doc none (no description available) pn hal-info none (no description available) pn halibut none (no description available) Not there. What else could cause the problem ?? Thanks Cheers Frank -- Change the world one loan at a time - visit Kiva.org to find out how -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Pcmcia express card
Hi all I need to buy a ethernet pcmcia express card for my notebook (its integrated ethernet card is broken). Can anyone suggest me a device that work with linux!?? Thanks in advance Im sorry for my bad english -- Andrea Corradi | Debian User | www.debian.org Fingerprint: A41E F6B0 DBDB F04C 4940 E411 30F3 CD62 57B1 8458 gpg --keyserver keyserver.linux.it --recv-key 57B18458 Please avoid sending me Word or PowerPoint attachments. http://www.gnu.org/philosophy/no-word-attachments.html signature.asc Description: PGP signature
Re: hda: DMA timeout error, is it a problem ?
Frank McCormick wrote: I've been following this thread for quite a while - I have been getting DMA timeout errors on boot for about a year - i am also running SMART and every test I have done shows no problem. Booted with the install disk and run fschk so many time I have lost track. Do you mean fsck rather than fschk ? But, having read the manual, I don't know which option(s) to use? I prefer to ask you which option(s) to use before making mistakes. ;-) Never a problem, but DMA timeouts continue. I have come to the conclusion it's some obscure bug, perhaps in the IDE module. It *never* affects anything else as the drive is fast and so far reliable. If/when it dies I'll change my opinion. I also think this is a bug.. but I don't understand why (if it's a bug) the problem happens suddenly! Maybe after an update ? I am not sure. I use debian etch and the version of the Linux kernel is : 2.6.18-4-486. I still have the same problem with another kernels. So, I don't think that it comes from somewhere else but it's instead hardware... Regards, -- Shams Fantar (http://snurf.info) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Possible LKM Trojan installed
Note: top posting fixed. Please don't do that. Also overquoting trimmed. On Sat, Aug 25, 2007 at 02:43:41AM -0500, Jude DaShiell wrote: On Fri, 24 Aug 2007, Mike Bird wrote: On Friday 24 August 2007 17:59, Jude DaShiell wrote: how these trojans survive is by surviving operating system reinstalls. The better trojans hide themselves in several out of the way places on disks and after adjacent areas have got their new files copy themselves back into the areas where no more disk wiping by the installer is about to happen. Trojan file names get changed too whenever this happens too. How would a trojan be activated to copy itself back if block zero was wiped, a new partitition table was installed, and new file systems created? Yes, an image of a trojan may still exist in the unused sectors of the first track of a partition, but how could it be activated? Very easily. The very first thing the trojan did after installing itself was to call home. Home has the address of the trojaned machine. Home can then check up on its trojan and maintain it and activate it or repair it as necessary. That makes zero sense, unless you assume the newly installed system will have the same security hole as the first. If it does, then why bother reactivating the former Trojan? Just install it again. In any case, the LKM warning is a WELL KNOWN FALSE POSITIVE from chkrootkit. IIRC it can be cause by something as simple as a very high system load. -- Carl Fink [EMAIL PROTECTED] Read my blog at nitpickingblog.blogspot.com. Reviews! Observations! Stupid mistakes you can correct! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: hda: DMA timeout error, is it a problem ?
On Sat, Aug 25, 2007 at 03:28:02PM +0200, Shams Fantar wrote: I also think this is a bug.. but I don't understand why (if it's a bug) the problem happens suddenly! Maybe after an update ? I am not sure. I use debian etch and the version of the Linux kernel is : 2.6.18-4-486. I still have the same problem with another kernels. So, I don't think that it comes from somewhere else but it's instead hardware... Try updating Etch. Ensure that you have the linux-image-486 meta-package installed, which depends on the linux-image-2.6-486 meta-package installed, which in turn depends on the most recent version which is 2.6.18-5-486. Perhaps the bug has been fixed. Doug. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Possible LKM Trojan installed
On Saturday 25 August 2007 00:43, Jude DaShiell wrote: Very easily. The very first thing the trojan did after installing itself was to call home. Home has the address of the trojaned machine. Home can then check up on its trojan and maintain it and activate it or repair it as necessary. Please don't top-post. You will recall that block zero has been wiped, new partition tables have been installed, and new filesystems created. At worst inactive copis of one or more malwares lies in unused portions of the drives where nothing in Debian will voluntarily or accidently activate it. How can home check up on its trojan, maintain it, activate it or repair it without the non-existent cooperation of the target system? Your argument seems to be that if I have a dead burglar robot in my house, the dead burglar robot's owner can call up the dead burglar robot and instruct the dead burglar robot to unlock a door of my house so that the dead burglar robot's owner can enter and repair the dead burglar robot. --Mike Bird -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: boot error
On Sat, Aug 25, 2007 at 08:46:01 -0400, Frank McCormick wrote: On Sat, 25 Aug 2007 10:23:54 +0200 Florian Kulzer wrote: [...] On Thu, Aug 23, 2007 at 21:25:29 -0400, Frank McCormick wrote: For the past few weeks I've been seeing an error message fly by (doesn't seem to affect anything) and I curious what's going on. the message is: dbus unknown username haldemon in message bus configuration file. [...] Then maybe you are not using the hal package at all. What is the output of dpkg -l hal\*? dpkg -l hal\* [...] pn hal none (no description available) pn hal-device-manager none (no description available) pn hal-doc none (no description available) pn hal-info none (no description available) pn halibut none (no description available) Not there. What else could cause the problem ?? The fact that hal is not installed causes the message. Something else seems to assume that the haldaemon user exists. You can either ignore the message, or install hal (why did you purge it?), or find out which configuration file on your system contains a reference to haldaemon and file a bug against the corresponding package. (I assume that if another package has a configuration file that refers to the haldaemon user then it should depend or maybe even pre-depend on the hal package.) -- Regards,| http://users.icfo.es/Florian.Kulzer Florian | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: hda: DMA timeout error, is it a problem ?
On Sat, 25 Aug 2007 15:28:02 +0200 Shams Fantar [EMAIL PROTECTED] wrote: Frank McCormick wrote: I've been following this thread for quite a while - I have been getting DMA timeout errors on boot for about a year - i am also running SMART and every test I have done shows no problem. Booted with the install disk and run fschk so many time I have lost track. Do you mean fsck rather than fschk ? But, having read the manual, I don't know which option(s) to use? I prefer to ask you which option(s) to use before making mistakes. ;-) As I recall: fsck -n -c -v /dev/hda1 I guess you know not to run it on a mounted partition. That way it won't do anything to the file system, I still am not sure whether the -c option means it won't add bad blocks to the list, but it has never found any so the question is moot :) I also think this is a bug.. but I don't understand why (if it's a bug) the problem happens suddenly! Maybe after an update ? I am not sure. My timeouts started when I updated Etch to Sid.So it's not just an Etch problem. Cheers Frank -- Change the world one loan at a time - visit Kiva.org to find out how -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: boot error
On Sat, 25 Aug 2007 15:42:45 +0200 Florian Kulzer [EMAIL PROTECTED] wrote: On Sat, Aug 25, 2007 at 08:46:01 -0400, Frank McCormick wrote: On Sat, 25 Aug 2007 10:23:54 +0200 Florian Kulzer wrote: [...] On Thu, Aug 23, 2007 at 21:25:29 -0400, Frank McCormick wrote: For the past few weeks I've been seeing an error message fly by (doesn't seem to affect anything) and I curious what's going on. dpkg -l hal\* pn hal none (no description available) pn hal-device-manager none (no description available) pn hal-doc none (no description available) pn hal-info none (no description available) pn halibut none (no description available) Not there. What else could cause the problem ?? The fact that hal is not installed causes the message. Something else seems to assume that the haldaemon user exists. You can either ignore the message, or install hal (why did you purge it?), As I recall I didn't purge it - it was removed when some other stuff got installed during a Kernel update. Again as I recall Hal wasn't (isn't??) compatible with something else kernel-related. or find out which configuration file on your system contains a reference to haldaemon and file a bug against the corresponding package. (I assume that if another package has a configuration file that refers to the haldaemon user then it should depend or maybe even pre-depend on the hal package.) Well since the error seems to come from dbus, I would think it would be one of its config files...but there is no reference to hal or haldaemon in them. Very strange. Cheers Frank -- Change the world one loan at a time - visit Kiva.org to find out how -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Networking problems
Im having some big network problems all of a sudden and am not sure why. This is running an up-to-date Etch. I dont do anything fancy. Im on a wireless network now. I had a system freeze, and when i rebooted, no networking interfaces came up at all. I was unable to get anything recognized, but then again im not sure how to do this anyway. I rebooted again, this time booting into 2.6.18-4-686 (instead of -5-), and wireless networking did come up in the boot process. However the Network Manager applet doesnt show this--its still reporting in grey no network devices have been found. But if I run network-admin it does show that eth1 (my wirelss) is running, and i can get online. I also did just upgrade with apt-get and i was able to install 2.6.18-6, but even though this worked correctly, i still dont get this option when i boot--i only have -4 or -5 (and again, -5 doesnt recognize my wireless). What can i do to address this? I can give more error messages if i know what to post. Again I dont want to do anything fancy, I want this to just work. Thanks, Jen Fussy? Opinionated? Impossible to please? Perfect. Join Yahoo!'s user panel and lay it on us. http://surveylink.yahoo.com/gmrs/yahoo_panel_invite.asp?a=7 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Hardware vs Software RAID 10 performance?
(First of all, I apologise if anyone sees this twice - I first posted to the AMD64 list, but then thought that the more general debian users list might get a broader response)... I'm curious as to whether anyone has experience of software RAID in Linux giving better overall performance on RAID10 than a RAID card such as the Adaptec 2015S. Server: Debian Etch AMD64 on Dual Opteron 265, 1.8GHz, i.e. 4 cores total, 4GB RAM, 4x10k Fujitsu SCSI 73GB, Adaptec 2015S zero-channel RAID card. Currently I have the four drives in RAID10 using the Adaptec, i.e. it appears as one big drive to Linux. Then a few days ago I saw this video presentation on scaling from one of the guys who developed YouTube: http://video.google.com/videoplay?docid=-6304964351441328559 One thing that really caught my attention was around the 34:50 mark. He talks about how they were seeing IO wait on their RAID 10 setup, which had 5 sets of 2 disk RAID1 arrays, appearing to Linux as one device. They thought that since Linux was only seeing one big single RAID 10 device, maybe the kernel wasn't parallelising disk reads and writes aggressively enough. So they changed it to still use hardware RAID 1 on the disk pairs, but then exposed these RAID 1 devices to the linux kernel (i.e. now 5 distinct RAID 1 arrays) and then used software RAID 0 to stripe across those. This seems really simple and ingenious, since it allows linux now to realize that there is more potential to parallelize io. They apparently saw 20-30% increase in performance on the same hardware after doing that. I only have four disks, but now I'm wondering if I might see improvement in performance by reconfiguring as two RAID 1 arrays and then doing software RAID 0 across those. Or, why not go even further and do JBOD on the RAID controller, and do all the RAID10 in Linux? Would that see better performance? I have little knowledge of what zero channel really means, or how good the hardware raid processor is in the Adaptec 2015S. What I am fairly sure of is that with the 4 Opteron cores, I have CPU cycles to spare; on this server I am much more likely to run out of io throughput before I run out of pure CPU cycles. So I am interested in maximizing the io, even if it means doing a little more work in the kernel. I'm not doing RAID5, so there's no parity work being done; I don't have a handle on how much work RAID10 takes for software RAID. Also, really have no take on where the real IO bottleneck is here - if putting the RAID into Linux would actually have any benefit with this particular type of card. I mean, if the actual bottleneck is actually on some bus or other in between the disks and the motherboard, then it really doesn't matter where the RAID is handled. Does anybody have any experience of this, or wisdom to impart? I have read all the arguments in favor of software RAID, and that's all very nice, but what I am primarily wondering about here is if it's likely that shifting over to software RAID might allow Linux to improve IO by more parallelization of reads/writes, or if it's just shifting complexity from one place to another, with the same bottleneck in between? (In which case, I guess, might as well go with software RAID, since it seems easier to recover from a controller crash). Thanks! /Neil -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Pcmcia express card
[L]ash([EMAIL PROTECTED]) is reported to have said: Hi all I need to buy a ethernet pcmcia express card for my notebook (its integrated ethernet card is broken). Can anyone suggest me a device that work with linux!?? Thanks in advance Im sorry for my bad english What bad english? Ethernet controller: 3Com Corporation 3cXFEM656C 10/100 LAN+Winmodem CardBus [Tornado] 3Com Megahertz 10/100 LAN Cardbus Both of the above need a pigtail cable to connect to RJ-45. Each use a different cable. Wayne -- Real programmers don't bring brown-bag lunches. If the vending machine doesn't sell it, they don't eat it. Vending machines don't sell quiche. ___ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Adobe SVG viewer plugin
Hi Debianists, I have a strange problem with the SVG viewer plugin from Adobe [1]. I use XFCE. I installed the plugin, then went to test it. An EULA was displayed, I accepted it, and from then on, SVG graphicvs were displayed correctly. However, my wife uses Gnome. When she tried to check SVG, nothing was displayed, and Iceweasel stopped with a segmentation fault. When I started it from a terminal window, there were two messages: Could not find font to display EULA Could not find font to display menu The same happened with my guest account. But, when I logged in to an XFCE session with the guest account, all went well. Logging back to Gnome the same thing happened (except that the EULA message wasn't displayed, since I accepted it). So, my question basically is: what are the differences between Gnome and XFCE related to font handling, and what shall I do to let the SVG plugin access the font it needs under Gnome? Thanks in advance. [1] http://www.adobe.com/svg/viewer/install/ -- Szia: Nyizsa. -- Get a free email address with REAL anti-spam protection. http://www.bluebottle.com/tag/1 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]