Re: audacity
Salut, Dans Edition -- preferences (ou ctrl+p) -- E/S audio --- choisis alsa Ma vesion d'audacity : `-- audacity -version Audacity v1.3.5-beta (Unicode) Il est largement possible que les options ne soient plus au même endroit... Le lundi 18 août 2008 à 09:02:20, mess-mate a écrit : Bonjour, pour une raison inconnue je peux pas sélectionner le device qu'il faut. Donc pas de son ! Je crois qu'il faut utiliser alsa mais où faut-il configurer cela dans audacity ? Dans preferences c'est pas possible. merci d'avance amicalement -- mess-mate Watch Rincewind. Look at him. Scrawny, like most wizards, and clad in a dark red robe on which a few mystic sigils were embroidered in tarnished sequins. Some might have taken him for a mere apprentice enchanter who had run away from his master out of defiance, boredom, fear and a lingering taste for heterosexuality. Yet around his neck was a chain bearing the bronze octagon that marked him as an alumnus of Unseen University, the high school of magic whose time-and-space transcendent campus is never precisely Here or There. Graduates were usually destined for mageship at least, but Rincewind--after an unfortunate event--had left knowing only one spell and made a living of sorts around the town by capitalizing on an innate gift for languages. He avoided work as a rule, but had a quickness of wit that put his acquaintances in mind of a bright rodent. -- Terry Pratchett, The Colour of Magic -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: audacity
Bonjour, j'ai la version 1.2.4 de etch. Il est impossible de choisir un device dans preferences. Par contre ceci marche: aoss audacity pour lancer audacity. Où peut-on trouver cette version pour une debian etch 1.3.5-beta ? A installer dans une etch biensur. cordialement Philippe Pepiot wrote: Salut, Dans Edition -- preferences (ou ctrl+p) -- E/S audio --- choisis alsa Ma vesion d'audacity : `-- audacity -version Audacity v1.3.5-beta (Unicode) Il est largement possible que les options ne soient plus au même endroit... Le lundi 18 août 2008 à 09:02:20, mess-mate a écrit : Bonjour, pour une raison inconnue je peux pas sélectionner le device qu'il faut. Donc pas de son ! Je crois qu'il faut utiliser alsa mais où faut-il configurer cela dans audacity ? Dans preferences c'est pas possible. merci d'avance amicalement -- mess-mate Watch Rincewind. Look at him. Scrawny, like most wizards, and clad in a dark red robe on which a few mystic sigils were embroidered in tarnished sequins. Some might have taken him for a mere apprentice enchanter who had run away from his master out of defiance, boredom, fear and a lingering taste for heterosexuality. Yet around his neck was a chain bearing the bronze octagon that marked him as an alumnus of Unseen University, the high school of magic whose time-and-space transcendent campus is never precisely Here or There. Graduates were usually destined for mageship at least, but Rincewind--after an unfortunate event--had left knowing only one spell and made a living of sorts around the town by capitalizing on an innate gift for languages. He avoided work as a rule, but had a quickness of wit that put his acquaintances in mind of a bright rodent. -- Terry Pratchett, The Colour of Magic -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: soucis apt-get upgrade
Bonjour, Le jeudi 21 août 2008, Bruno a écrit... Que dois je faire concrètement pour ne plus avoir cette erreur ? J'en sais rien ! que la police de caractère me pose aussi des soucis, #echo $LANG donne fr_FR.UTF-8 Que dois je faire pour améliorer la restitution des caractères accentués ? Utiliser une police qui permet d'afficher l'UTF-8. Les caractères qui sont affichés sont typiques de caractères encodés en utf-8 mais affichés par du latin1. -- jm A.E.L. Sarl (R.C.S CASTRES 490843240) http://www.spidboutic.fr -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
resolution ecran LARGE
Bonsoir Ubuntu 8.04 avec un ecran 1400 900 60hz L'outil cliquodromique (gnome-display-properties) ne propose pas cette resolution. Que faire pour la mettre en oeuvre ? Merci d'avance -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: resolution ecran LARGE
[EMAIL PROTECTED] a écrit : Bonsoir Bonsoir, Ubuntu 8.04 avec un ecran 1400 900 60hz L'outil cliquodromique (gnome-display-properties) ne propose pas cette resolution. Que faire pour la mettre en oeuvre ? Je pense qu'il va te falloir mettre les mains dans le moteur, heu dans le /etc/X11/xorg.conf, un dpkg-reconfigure xserver-xorg ne permettant plus depuis la version 7.3 (il me semble) de spécifier la résolution. C'est xrandr qui prend en charge cela maintenant il me semble (à confirmer). Il te faut ajouter dans le /etc/X11/xorg.conf une sous-section dans la section Screen de ce genre là : # SubSection Display Depth24 Modes1280x800 1280x768 1200x800 1152x864 1152x768 1024x768 800x600 640x480 EndSubSection # Merci d'avance De rien, Bonne soirée. -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
gimp-2.5.3 et le 16 bits
Bonjour La version de développement gimp-2.5.3 vient de sortir. Je l'ai compilée sur Lenny et brièvement essayée. Toujours pas de support 16 bits : warning, the image you're loading are 16 bits per channel. GIMP can only handle 8 bits. Quelqu'un a-t-il une autre expérience concernant le 16 bits avec gimp-2.5 ? M -- Lisez la FAQ de la liste avant de poser une question : http://wiki.debian.org/DebFrFrenchLists Vous pouvez aussi ajouter le mot ``spam'' dans vos champs From et Reply-To: To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Error al hacer dpkg-reconfigure xserver-xorg
Rodrigo Cortés escribió: 2008/8/21 Salvador Garcia Z. [EMAIL PROTECTED]: Rodrigo Cortés escribió: 2008/8/16 Salvador Garcia Z. [EMAIL PROTECTED]: Después metes el driver privativo y todo va de lujo. Perdón pero los pasos que indicas instalan el módulo del driver nvidia que se carga en el kernel (o me equivoco??)... entonces... para que instalas luego el driver privativo??? El driver privativo lo cargo por que, los que estan en debian no me permiten controlar o no se como controlar los floats y el SLI, para aprobechar al maximo lo que he pagado por ella. Con los privativos le puedo llevar a que me responda a 16x y ajustes de resolución de 32. la tarjeta que tengo es esta: Lo que trataba de decirte es que con la instalación mediante m-a a-i instalas un driver que existe en los repositorios de debian, sin embargo, si instalas el driver privativo te reemplazará el driver instalado por el privativo, por eso, sólo basta con instalar el privativo. Si y no. Da la casualidad de que el driver privativo solo lo puedes cargar con el núcleo 2.6.18 y eso ya no existe, ya estamos en el 2.6.26, lo cual quiere decir que tendrías que copilar o buscar la manera de cargar un núcleo antiguo que muchas veces no, nos da el rendimiento que esperamos de nuestros ordenadores, con el 18 tengo problemas de usb y algunos de bios. De esta manera el driver privativo entra en cualquier núcleo sin problemas. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Compilar Heartbeat 2.1.4
Hola, estoy tratando de compilar el Heartbeat 2.1.4 en debian etch. Me sale este error, y creo que es un poco genérico: http://1227.com/ gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../../include -I../../include -I../../include -I../../linux-ha -I../../linux-ha -I../../libltdl -I../../libltdl -D_BSD_SOURCE -D__BSD_SOURCE -D__FAVOR_BSD -DHAVE_NET_ETHERNET_H -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -g -O2 -Wall -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes -Wdeclaration-after-statement -Wpointer-arith -Wwrite-strings -Wcast-qual -Wcast-align -Wbad-function-cast -Winline -Wmissing-format-attribute -Wformat=2 -Wformat-security -Wformat-nonliteral -Wno-long-long -Wno-strict-aliasing -Werror -ggdb3 -funsigned-char -g -O2 -Wall -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes -Wdeclaration-after-statement -Wpointer-arith -Wwrite-strings -Wcast-qual -Wcast-align -Wbad-function-cast -Winline -Wmissing-format-attribute -Wformat=2 -Wformat-security -Wformat-nonliteral -Wno-long-long -Wno-strict-aliasing -Werror -ggdb3 -funsigned-char -MT pils.lo -MD -MP -MF .deps/pils.Tpo -c pils.c -fPIC -DPIC -o .libs/pils.o cc1: warnings being treated as errors pils.c:244: error: initialization from incompatible pointer type pils.c:245: error: initialization from incompatible pointer type make[2]: *** [pils.lo] Error 1 make[2]: se sale del directorio `/usr/src/Heartbeat-STABLE-2-1-STABLE-2.1.4/lib/pils' make[1]: *** [all-recursive] Error 1 make[1]: se sale del directorio `/usr/src/Heartbeat-STABLE-2-1-STABLE-2.1.4/lib' Cómo podría solucionarse ?? A alguien le suena ?? Creo que en otras versiones de Linux está compilando. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: como arreglar esto?
On Thu, Aug 21, 2008 at 6:05 PM, Luis Rondon Paz [EMAIL PROTECTED] wrote: hace unos dÃas instalé munin pero estoy recibiendo a cada rato un correo con esto me pueden decir que tengo que hacer para arreglar esto? o mejor dicho agregar en la configuración para que no me lo envié mas pues tengo entendido que si escribo $bash: export LANG=C automáticamente se arregla pero las tildes y los caracteres donde los adiciono o en que parte de la config para que no me de mas este correo el cron ? salu2s perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = es_ES.UTF-8 are supported and installed on your system. perl: warning: Falling back to the standard locale (C). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = es_ES.UTF-8 are supported and installed on your system. perl: warning: Falling back to the standard locale (C). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = es_ES.UTF-8 are supported and installed on your system. perl: warning: Falling back to the standard locale (C). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = es_ES.UTF-8 are supported and installed on your system. perl: warning: Falling back to the standard locale (C). ~:# dpkg-reconfigure locales Generating locales (this might take a while)... en_US.ISO-8859-1... done en_US.ISO-8859-15... done es_ES.ISO-8859-1... done [EMAIL PROTECTED] done es_US.ISO-8859-1... done en_US.UTF-8... done Generation complete. perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = es_ES.UTF-8 are supported and installed on your system. perl: warning: Falling back to the standard locale (C). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = es_ES.UTF-8 are supported and installed on your system. perl: warning: Falling back to the standard locale (C). y entonces' sigo igual :-( -- La Voluntad es el unico motor de nuestros logros Mstaaravin / http://www.mstaaravin.com.ar/ -- Este mensaje ha sido analizado por MailScanner en busca de virus y otros contenidos peligrosos, y se considera que está limpio. http://www.minaz.cu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Compilar Heartbeat 2.1.4
2008/8/22 Adrian Chapela [EMAIL PROTECTED]: Hola, estoy tratando de compilar el Heartbeat 2.1.4 en debian etch. Me sale este error, y creo que es un poco genérico: http://1227.com/ gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../../include -I../../include -I../../include -I../../linux-ha -I../../linux-ha -I../../libltdl -I../../libltdl -D_BSD_SOURCE -D__BSD_SOURCE -D__FAVOR_BSD -DHAVE_NET_ETHERNET_H -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -g -O2 -Wall -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes -Wdeclaration-after-statement -Wpointer-arith -Wwrite-strings -Wcast-qual -Wcast-align -Wbad-function-cast -Winline -Wmissing-format-attribute -Wformat=2 -Wformat-security -Wformat-nonliteral -Wno-long-long -Wno-strict-aliasing -Werror -ggdb3 -funsigned-char -g -O2 -Wall -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes -Wdeclaration-after-statement -Wpointer-arith -Wwrite-strings -Wcast-qual -Wcast-align -Wbad-function-cast -Winline -Wmissing-format-attribute -Wformat=2 -Wformat-security -Wformat-nonliteral -Wno-long-long -Wno-strict-aliasing -Werror -ggdb3 -funsigned-char -MT pils.lo -MD -MP -MF .deps/pils.Tpo -c pils.c -fPIC -DPIC -o .libs/pils.o cc1: warnings being treated as errors pils.c:244: error: initialization from incompatible pointer type pils.c:245: error: initialization from incompatible pointer type make[2]: *** [pils.lo] Error 1 make[2]: se sale del directorio `/usr/src/Heartbeat-STABLE-2-1-STABLE-2.1.4/lib/pils' make[1]: *** [all-recursive] Error 1 make[1]: se sale del directorio `/usr/src/Heartbeat-STABLE-2-1-STABLE-2.1.4/lib' Cómo podría solucionarse ?? A alguien le suena ?? Creo que en otras versiones de Linux está compilando. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] Por que no lo instalas desde los repositorios? -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: md300 modem 3g en lenny
O Xoves 21 Agosto 2008 21:52, javier barcena escribiu: buenas tardes.. hace casi 14 dias que intento hacer funcionar el modem usb 3g de sony ericsson MD300 en debian lenny pero por distintos caminos llegoal mismo resultado.. el dispositivo ttyUSB0 no es reconocido. Entre las cosas que hice fue crear reglas udev, agregar el id y vendor del modem al modulo usbserial y crear los dispositivos con .. mknod.. ttyUSB0, 1,2. Lei casi todos los tutoriales de las distintas distribuciones.. pero nodi con la solucion correcta.. Mi kernel es 2.6.24-1 para un amd k7 Saludos javier No deberias tener que crear reglas udev, ni hacer nada con mknod (y mucho menos hacer las dos al mismo tiempo). Si efectivamente el módulo usbserial hace funcionar tu modem y al enchufarlo no aparece automáticamente el dispositivo ttyUSB0, tienes que indicarle al módulo usbserial el id de vendedor y producto. Si ni con esas, igual tu dispositivo no se puede usar así. Dices que ya agregado el id de vendedor y producto al modulo, pero no dices cómo. Yo lo hice para un MPX200 con los parámetros del módulo, de esta forma: # rmmod usbserial #modprobe usbserial vendor=0x product=0x Enchufa ahora tu aparato y comprueba si aparece el dispositivo ttyUSB0 Si sigues teniendo problemas danos más detalles: salida de dmesg, ids del dispositivo, etc... Suerte. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Compilar Heartbeat 2.1.4
Michel Blankleder escribió: 2008/8/22 Adrian Chapela [EMAIL PROTECTED]: Hola, estoy tratando de compilar el Heartbeat 2.1.4 en debian etch. Me sale este error, y creo que es un poco genérico: http://1227.com/ gcc -std=gnu99 -DHAVE_CONFIG_H -I. -I../../include -I../../include -I../../include -I../../linux-ha -I../../linux-ha -I../../libltdl -I../../libltdl -D_BSD_SOURCE -D__BSD_SOURCE -D__FAVOR_BSD -DHAVE_NET_ETHERNET_H -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libxml2 -g -O2 -Wall -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes -Wdeclaration-after-statement -Wpointer-arith -Wwrite-strings -Wcast-qual -Wcast-align -Wbad-function-cast -Winline -Wmissing-format-attribute -Wformat=2 -Wformat-security -Wformat-nonliteral -Wno-long-long -Wno-strict-aliasing -Werror -ggdb3 -funsigned-char -g -O2 -Wall -Wmissing-prototypes -Wmissing-declarations -Wstrict-prototypes -Wdeclaration-after-statement -Wpointer-arith -Wwrite-strings -Wcast-qual -Wcast-align -Wbad-function-cast -Winline -Wmissing-format-attribute -Wformat=2 -Wformat-security -Wformat-nonliteral -Wno-long-long -Wno-strict-aliasing -Werror -ggdb3 -funsigned-char -MT pils.lo -MD -MP -MF .deps/pils.Tpo -c pils.c -fPIC -DPIC -o .libs/pils.o cc1: warnings being treated as errors pils.c:244: error: initialization from incompatible pointer type pils.c:245: error: initialization from incompatible pointer type make[2]: *** [pils.lo] Error 1 make[2]: se sale del directorio `/usr/src/Heartbeat-STABLE-2-1-STABLE-2.1.4/lib/pils' make[1]: *** [all-recursive] Error 1 make[1]: se sale del directorio `/usr/src/Heartbeat-STABLE-2-1-STABLE-2.1.4/lib' Cómo podría solucionarse ?? A alguien le suena ?? Creo que en otras versiones de Linux está compilando. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] Por que no lo instalas desde los repositorios? Lo quiero poder actualizar más rápido que las actualizaciones de Debian, además de poder usar Betas. Para mi caso creo que es la mejor opción. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: como arreglar esto?
2008/8/22 Luis Rondon Paz [EMAIL PROTECTED]: On Thu, Aug 21, 2008 at 6:05 PM, Luis Rondon Paz [EMAIL PROTECTED] ~:# dpkg-reconfigure locales Generating locales (this might take a while)... en_US.ISO-8859-1... done en_US.ISO-8859-15... done es_ES.ISO-8859-1... done [EMAIL PROTECTED] done es_US.ISO-8859-1... done en_US.UTF-8... done Generation complete. perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = es_ES.UTF-8 are supported and installed on your system. perl: warning: Falling back to the standard locale (C). perl: warning: Setting locale failed. perl: warning: Please check that your locale settings: LANGUAGE = (unset), LC_ALL = (unset), LANG = es_ES.UTF-8 are supported and installed on your system. perl: warning: Falling back to the standard locale (C). y entonces' Necesitas tener es_ES.UTF-8, que es el que tienes configurado en tu máquina. Saludos, Miry -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Compilar Heartbeat 2.1.4
El 22/08/2008 16:46, Adrian Chapela escribió: Lo quiero poder actualizar más rápido que las actualizaciones de Debian, además de poder usar Betas. Para mi caso creo que es la mejor opción. Pues DIRECTAMENTE a Sid, y ya está. -- Slds. de Santiago José López Borrazás. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Documentacion sobre Mailman
Saludos: hace rato quiero montar en mi pc que tiene debian, el mailman pero he buscado por todos lados documentación actualizada que me explique paso a paso como instalarlo, configurarlo y administrarlo, si alguien que sea miembro de la lista me puede ayudar por favor se lo agradecería inmensamente. -- Yoandy Márquez Montero ( Tito ) Administrador de Red Nodo [ipivc.rimed.cu] IPI Lázaro Cárdenas del Río, Santa Clara, VC. Cuba WebMaster Url: http://www.ipivc.rimed.cu E_mail: [EMAIL PROTECTED] Jabber: [EMAIL PROTECTED] Telef: 53-42-218401 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Maldito akregator ....
Hola lista. Por lo visto ayer hubo una actulización para akregator vía aptitude y para mi desgracia ni tenía una copia de seguridad de mis feeds (mal hecho) y tampoco me dejó una copia de seguridad de mis antiguos feeds en el directorio donde los guarda akregator ... así que se me quedó cara de tonto cuando ví que al abrir akregator tenía los feeds por defecto gr Así que lo que me gustaría es que me dijérais si existe alguna posibilidad de recuperarlo de manera mas rapida sin tener que mantener la unidad desmontada y hacerlo al vuelo. He probado con foremost y con egrep ... pero no se si hay otra forma mas instantanea... un saludo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Maldito akregator ....
O Venres 22 Agosto 2008 20:12, nx escribiu: Hola lista. Por lo visto ayer hubo una actulización para akregator vía aptitude y para mi desgracia ni tenía una copia de seguridad de mis feeds (mal hecho) y tampoco me dejó una copia de seguridad de mis antiguos feeds en el directorio donde los guarda akregator ... así que se me quedó cara de tonto cuando ví que al abrir akregator tenía los feeds por defecto gr Así que lo que me gustaría es que me dijérais si existe alguna posibilidad de recuperarlo de manera mas rapida sin tener que mantener la unidad desmontada y hacerlo al vuelo. He probado con foremost y con egrep ... pero no se si hay otra forma mas instantanea... un saludo Me parece muy raro que una actualización borre ningún archivo de configuración. Si lo ha hecho creo que podría considerarse un bug (la política de Debian habla mucho sobre conservar configuraciones. Puedes decir con qué versión exacta te ha pasado esto? Sobre solucionarlo, lo veo chungo. El archivo donde se guarda la información de los feeds es ~/.kde/share/apps/akregator/data/feeds.opml. Con un poco de suerte simplemente ha usado otro archivo y puedes sacar la info de ahí. Si no... backups? Suerte. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Maldito akregator ....
2008/8/22 Jorge Barreiro Gonzalez [EMAIL PROTECTED]: O Venres 22 Agosto 2008 20:12, nx escribiu: Hola lista. Por lo visto ayer hubo una actulización para akregator vía aptitude y para mi desgracia ni tenía una copia de seguridad de mis feeds (mal hecho) y tampoco me dejó una copia de seguridad de mis antiguos feeds en el directorio donde los guarda akregator ... así que se me quedó cara de tonto cuando ví que al abrir akregator tenía los feeds por defecto gr Así que lo que me gustaría es que me dijérais si existe alguna posibilidad de recuperarlo de manera mas rapida sin tener que mantener la unidad desmontada y hacerlo al vuelo. He probado con foremost y con egrep ... pero no se si hay otra forma mas instantanea... un saludo Me parece muy raro que una actualización borre ningún archivo de configuración. Si lo ha hecho creo que podría considerarse un bug (la política de Debian habla mucho sobre conservar configuraciones. Puedes decir con qué versión exacta te ha pasado esto? Sobre solucionarlo, lo veo chungo. El archivo donde se guarda la información de los feeds es ~/.kde/share/apps/akregator/data/feeds.opml. Con un poco de suerte simplemente ha usado otro archivo y puedes sacar la info de ahí. Si no... backups? Suerte. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] Normalmente debian nunca borra un archivo de configuración, mas bien lo mueve a un archivo .old o .algo para que no haya problemas. Revisa el path de tu configuración, tal vez encuentres tu antigua configuración con otra terminación. Revisa las fechas de modificación. -- Atte ItZtLi ¤º°°º¤ø,¸¸,ø¤º°°º¤ø,¸¸,ø¤º°`°º¤ø,¸ Nahui Tonalli Icniuhtli. ¤º°°º¤ø,¸¸,ø¤º°°º¤ø,¸¸,ø¤º°`°º¤ø,¸ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Maldito akregator ....
Victor H De la Luz escribió: 2008/8/22 Jorge Barreiro Gonzalez [EMAIL PROTECTED]: O Venres 22 Agosto 2008 20:12, nx escribiu: Hola lista. Por lo visto ayer hubo una actulización para akregator vía aptitude y para mi desgracia ni tenía una copia de seguridad de mis feeds (mal hecho) y tampoco me dejó una copia de seguridad de mis antiguos feeds en el directorio donde los guarda akregator ... así que se me quedó cara de tonto cuando ví que al abrir akregator tenía los feeds por defecto gr Así que lo que me gustaría es que me dijérais si existe alguna posibilidad de recuperarlo de manera mas rapida sin tener que mantener la unidad desmontada y hacerlo al vuelo. He probado con foremost y con egrep ... pero no se si hay otra forma mas instantanea... un saludo Me parece muy raro que una actualización borre ningún archivo de configuración. Si lo ha hecho creo que podría considerarse un bug (la política de Debian habla mucho sobre conservar configuraciones. Puedes decir con qué versión exacta te ha pasado esto? Sobre solucionarlo, lo veo chungo. El archivo donde se guarda la información de los feeds es ~/.kde/share/apps/akregator/data/feeds.opml. Con un poco de suerte simplemente ha usado otro archivo y puedes sacar la info de ahí. Si no... backups? Suerte. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] Normalmente debian nunca borra un archivo de configuración, mas bien lo mueve a un archivo .old o .algo para que no haya problemas. Revisa el path de tu configuración, tal vez encuentres tu antigua configuración con otra terminación. Revisa las fechas de modificación. Chungo entonces creo que va a ser lo que me temía que ayer peté mucho el disco duro hasta el punto de que se me quedó completamente lleno y a lo peor en ese momento actualizó la lista de feeds y ... como no había espacio donde escribir no pudo hacerlo porque no habia espacio! ... en fin es solo una teoría. Para la proxima vez tendré algún backup ya que tengo la mala costumbre de no hacerlo ... :( Un saludo y gracias -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
[OT] - Problemas con ORACLE 10g Express Edition
Instale ORACLE 10g Express Edition de 32 bits en un equipo 64 bits lo pude instalar, pero al ahora me pasa lo siguiente, ademas adjunto mi archivo con las variables s.o. code Introduzca el nombre de usuario: system Introduzca la contraseña: ERROR: ORA-01034: ORACLE not available ORA-27101: shared memory realm does not exist Linux Error: 2: No such file or directory /code mi archivo /home/user/.bashrc tienes estas variasbles de ambiente code export PATH=$PATH:/usr/lib/oracle/xe/app/oracle/product/10.2.0/server/bin export ORACLE_HOME=/usr/lib/oracle/xe/app/oracle/product/10.2.0/server export ORACLE_SID=XE export NLS_LANG=`$ORACLE_HOME/bin/nls_lang.sh` /code alguien tiene idea de que pasa? de ante mano muchas gracias
Re: Laptop ACER Aspire 3050-1922
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hola que tal... angel escribió: El sáb, 16-08-2008 a las 17:08 -0430, Félix E. Urbina C. escribió: Hola a todos, Tengo una portátil: - Acer Aspire 3050-1922 - Procesador AMD Sempron - Tarjeta gráfica ATI raedon xpress 1100 - RAM 512MB DDR2 He instalado Debian Etch r3, Etch r4a y Lenny Beta2, en todos los casos presenta problemas, en cuanto a la instalación funciona todo tranquilamente. El problema se da en post-instalación, cuando enciendo la máquina comienza a cargar todo el sistema sin problemas solo cuando llega a un punto que se queda congelada la carga y de ahí no pasa. Las últimas líneas que manifiesta es: Loading ACPI modules: battery ACPI: Battery Slot [BAT1] (battery absent) ac Así tal cual, de todas maneras seguiré buscando en Google a ver si consigo alguna solución. Mientras que alguien la sepa por acá sería bueno saberlo. Proba pasando estos parametros en el boot: pci=assign-busses apicmaintimer idle=poll Gracias por el apoyo, pero así tampoco funcionó, tendré que buscar otra manera de hacer las cosas. Gracias. Saludos... - -- Félix E. Urbina C. Ciudad Guayana, Venezuela -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkivf5wACgkQ4y7Ij51lpaLp8ACfZEO+RuTZOaYxB0N3BLcpGeeb 83AAnixMfL9FXjq7jpq6dV3baalJIiYi =p6PD -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Laptop ACER Aspire 3050-1922
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Odair Augusto Trujillo escribió: Hola, cuando tengas el menú del grub puesto, presiona e para editar la entrada, luego vas a la línea del kernel y presionas e para editar esa línea, le quitas la opción quiet y presionas enter, luego presionas b para iniciar. Ahí te da mas detalles del problema. -- Al principio, el Hombre creó a Dios; y lo creó a su imagen y semejanza. Y el Hombre dio a Dios multitud de nombres, y el poder de que fuera el Señor de toda la tierra cuando al Hombre le conviniere. Eureka, ya activé la portátil, solo quité del init.d el servicio acpid para que no arranque, sin embargo buscaré bien si es indispensable, por que podría agregarlo en otro nivel. Saludos... - -- Félix E. Urbina C. Ciudad Guayana, Venezuela -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkivgSUACgkQ4y7Ij51lpaJ6EQCfalMwMb1DHeoQmJx4jq1bvPJb dpgAn0f/MRPuYSSdmcHjbofjd+TbWsRw =9eAA -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
SV: kvm/qemu: vnc-geometri?
Det görs av den som startar vncserver Så här gör jag med min FC8-maskin där vncserver går som demon: [EMAIL PROTECTED] ~]$ cat /etc/sysconfig/vncservers VNCSERVERS=1:bengt VNCSERVERARGS[1]=-geometry 1680x1050 -nohttpd Det går att ange direkt om man startar vncserver med kommando. Pröva vncserver --help Du skall inte behöva pilla i X konfiguration för detta. /Bengt - Ursprungligt meddelande Från: [EMAIL PROTECTED] [EMAIL PROTECTED] Till: debian-user-swedish@lists.debian.org Skickat: måndag 11 augusti 2008 17:37:47 Ämne: kvm/qemu: vnc-geometri? Har nu kompletterat med en virtuell 32-bitarsmaskin (kör Lenny-x86) med hjälp av virt-manager (använder kvm/qemu och libvirtd). Den funkar fint även om muspekaren är krånglig (det rekommenderas att använda en extern USB-pekplatta för den virtuella maskinen). Jag behöver sun-java-plugin för att kunna fylla i reseräkningar... Dyker den någonsin upp i 64-bitarsversion? Det är inte uppenbart hur man byter skärmstorlek (-geometry) på den vnc-server genom vilken man ansluter till de virtualiserade maskinerna och det framgår inte av dokumentationen. Rutan blir bara 800x600 - för lite för en Iceweasel. Är det så illa att man måste ange default i Xorg.conf ? /Fredrik -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] __ Ta semester! - sök efter resor hos Kelkoo. Jämför pris på flygbiljetter och hotellrum här: http://www.kelkoo.se/c-169901-resor-biljetter.html?partnerId=96914052 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: atualizações debian etch
Uma atualização menos arriscada e mais imediata poderia ser o repositório volatile. Vejam: http://www.tutolivre.net/volatile-clamav-e-spamassassin-atualizados-no-debian-40-etch/ http://www.debian.org/devel/debian-volatile/ Daemon BR escreveu: Quando o debian lenny ser liberado como estável, até quando vai ter atualizações para o debian etch ? -- Att -- Atenciosamente, Roberto Tikao Tsukamoto Júnior UNEMAT - Universidade do Estado de Mato Grosso Cáceres-MT -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
codificação de texto
Pessoal, boa tarde... Qual a codificação de texto utilizada pelo windows, para que eu posso configurar o meu debian etch para vizualizar nomes de pastas e arquivos com acentos no linux... -- Cumprimentos Carlos Alberto Mota Castro (Maranhão) Não sabia que era impossível, foi lá e fez.
Res: RES: Ajuda em conf. Do squid para maquina antiga
Cara, olha aqui: http://www.gdhpress.com.br/servidores/leia/index.php?p=cap2-8 tem umas dicas bem legais pra utilizar o squid, e tem uma linguagem fácil. Abraço. - Mensagem original De: Daniel [EMAIL PROTECTED] Para: debian-user-portuguese@lists.debian.org Enviadas: Quarta-feira, 20 de Agosto de 2008 15:26:11 Assunto: RES: Ajuda em conf. Do squid para maquina antiga Beleza galera, a todos muito obrigado. Fui um momento de raro desespero que escrevi e de fato vi os absurdos que tinha colocado no squid.conf. Peço desculpa a todos pois de fato uma pesquisa no google teria resolvido os problemas, estou na lista a anos e raramente dou uma dessas, espero que nào volte a acontecer. Um abraço a todos Daniel -Mensagem original- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Em nome de Rafael Enviada em: quarta-feira, 20 de agosto de 2008 12:08 Para: debian-user-portuguese@lists.debian.org Assunto: Re: Ajuda em conf. Do squid para maquina antiga Bom tenta coloca menos cache de memoria cache_mem 256 Mb vc colocou toda a memoria disponível isso não é recomendavel pq o servidor deve ficar com alguma memoria sobrando para poder rodar outros processos deve ser por essa razão que quando ativa o squid fica tudo lento ele não tem memoria para gerenciar todos os processos e começa a usar a swap recomendo diminir para algo em torno de 64Mb e defina tb o tamanho máximo dos arquivos que irão ficar no cache de memoria sem isso pode acontecer dos 64Mb reservados serem preenchido com apenas um arquivos grandes cache_mem 64 Mb maximum_object_size_in_memory 64kb A opção cache_mem serve para dizer ao squid quanto da memoria ele pode utilizar para o cache e não quanto de memoria o computador possui recomendo que vc faça um teste inicie o server sem o squid execute um free -m e veja quanta memoria ele utiliza com os serviço que ele tem sem o squid assi vc vera quanto de memoria sobra pra fazer o cache_mem sempre deixe uma margem de sobra por exemplo total used free shared buffers cached Mem: 495 489 6 0 10 69 -/+ buffers/cache: 409 86 Swap: 956 103 853 aqui temos um server usando 409Mb de memoria sendo que ele dispoe de 1Gb o cache do squid poderia ser de nomaximo uns 400 a 450 Mb deixando uma sobra para as horas em que o servidor fizer algum serviço mais pesado ter memoria disponivel utilize o comando free -m para ver quanto de swap vc esta usando quanto menos swap melhor -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] Novos endereços, o Yahoo! que você conhece. Crie um email novo com a sua cara @ymail.com ou @rocketmail.com. http://br.new.mail.yahoo.com/addresses
Servidor FTP
Bom dia Pessoal, Qual programa vocês me indicariam para prover serviço de FTP. Dei uma procurada e costumam utilizar o proftpd. É o mais aconselhável e com bons recursos ? Desde já agradeço, -- Adauto Serpa Tecnólogo em Informática [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Servidor FTP
Olá Adauto, Eu normalmente uso o vsftpd, é simples de configurar e roda muito bem. Nunca usei o proftpd. detalhes: Fornece: ftp-server Descrição: The Very Secure FTP Daemon A lightweight, efficient FTP server written from the ground up with security in mind. vsftpd supports both anonymous and non-anonymous FTP, PAM authentication, bandwidth limiting, and the Linux sendfile() facility. abs, Guilherme 2008/8/22 Adauto Serpa [EMAIL PROTECTED]: Bom dia Pessoal, Qual programa vocês me indicariam para prover serviço de FTP. Dei uma procurada e costumam utilizar o proftpd. É o mais aconselhável e com bons recursos ? Desde já agradeço, -- Adauto Serpa Tecnólogo em Informática [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] -- Guilherme Rocha Mobile 55 71 82032195 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Servidor FTP
Adauto, O vsftp e tao estavel quanto o proftpd a diferença é o vsftp é bem mais seguro. Att. Leandro Moreira On Fri, 22 Aug 2008 13:18:20 +, Adauto Serpa [EMAIL PROTECTED] wrote: Bom dia Pessoal, Qual programa vocês me indicariam para prover serviço de FTP. Dei uma procurada e costumam utilizar o proftpd. É o mais aconselhável e com bons recursos ? Desde já agradeço, -- Adauto Serpa Tecnólogo em Informática [EMAIL PROTECTED] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] !DSPAM:1,48aebd3b200876826718160! -- Leandro Moreira Linux Networks e-mail: [EMAIL PROTECTED] Tel.: + 55(32) 9906-5713 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
[OT] estraindo dados de tabela do mysql
Caros, Sei que esse tópico nao compete a essa lista, mas se alguem poder me ajudar preciso estrair os dados de uma tabela do mysql para um arquivo de texto. Desde já agradeço a ajuda. Att. -- Leandro Moreira Linux Networks e-mail: [EMAIL PROTECTED] Tel.: + 55(32) 9906-5713 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [OT] estraindo dados de tabela do mysql
Caros, Desculpem o transtorno, já resolvi o problema com mysqldump. Att. Leandro Moreira On Fri, 22 Aug 2008 11:10:21 -0300, Leandro Moreira [EMAIL PROTECTED] wrote: Caros, Sei que esse tópico nao compete a essa lista, mas se alguem poder me ajudar preciso estrair os dados de uma tabela do mysql para um arquivo de texto. Desde já agradeço a ajuda. Att. -- Leandro Moreira Linux Networks e-mail: [EMAIL PROTECTED] Tel.: + 55(32) 9906-5713 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED] !DSPAM:1,48aec8f4200871952989471! -- Leandro Moreira Linux Networks e-mail: [EMAIL PROTECTED] Tel.: + 55(32) 9906-5713 -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [OT] estraindo dados de tabela do mysql
Leandro Moreira wrote: Caros, Sei que esse tópico nao compete a essa lista, mas se alguem poder me ajudar preciso estrair os dados de uma tabela do mysql para um arquivo de texto. Desde já agradeço a ajuda. Não sei se é exatamente isso o que você quer, mas se você quiser fazer um dump da sua tabela, pode tentar: $ mysqldump DATABASE TABLE -u USER -p table.txt e se você quiser executar uma query, obter só uma coluna, etc. pode tentar: $ echo select * from TABLE | mysql DATABASE -u USER -p table.txt -- Atenciosamente, Arthur Furlan [EMAIL PROTECTED] Att. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Controle de banda e cache
Estou tentando resolver um problema grave na empresa onde trabalho. Aqui, temos um link via satélite de 256k e temos cerca de 20 pcs conectados a uma rede interna usando este link via compartilhamento nat do windows XP. Desta forma, a conexão fica extramamente lenda, tornando-se quase impossível seu uso. Para solucionar esta situação, seu sugeri a compra de uma máquina (que já está sendo providenciada) para ser servidor proxy squid dedicado com controle de banda. Já estou preparando o squid.conf, com ajuda de alguns tutoriais na internet e alguns emails aqui da lista, para implementar no servidor mas tenho as seguintes dúvidas: 1- Li por aí que o delay pools do squid pode chegar a corromper alguns arquivos executáveis (o que é indesejável,baixados nas máquinas clientes e que a melhor solução para limitar a banda no debian etch seria o shaper. Pois bem, existe algum problema ao usar o squid + shaper, ou eles só devem ser usados separadamente? 2-Qual o cáculo que devo fazer para saber qual quantidade de banda devo liberar para cada pc? 3-Onde encontro tutoriais sobre a configuração do shaper? grato, Saul Lima
Re: Controle de banda e cache
1- Li por aí que o delay pools do squid pode chegar a corromper alguns arquivos executáveis (o que é indesejável,baixados nas máquinas clientes e que a melhor solução para limitar a banda no debian etch seria o shaper. Bom, eu nunca havia ouvida falar disso. A única coisa que posso dizer, por experiência própria, é que uso delay_pools em um conjunto de laboratórios de informática da minha faculdade, onde se baixa bastante arquivos executáveis, e nunca ouvi nenhuma reclamação desse tipo. Se acontece, é pouco o suficiente pra que eu nunca tenha ficado sabendo. Quanto ao shapper, bom saber dele, não conhecia. =) -- http://edsonmarquezani.wordpress.com -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Ativar o Fn+F8 para mudar de monitor
2008/8/20 Ronaldo Reis Junior escreveu: tenho um Dell Latitude D400. Quando vou usar o datashow, eu tenho que ligar o datashow e depois o computador ou reiniciar o GDM para poder projetar a tela. Daí fica a tela nos dois, laptop e datashow. A tecla Fn+F8 era para, em teoria, alternar entre laptop, datashow ou laptop+datashow. Mas ela não funciona. Os drivers proprietários da NVidia vem com um programa que permite selecionar as saídas. Pela lista de pacotes, me parece que seu note tem uma controladora de vídeo Intel. Sendo um driver livre, deveria ser mais bem integrado ao note, né? Mas não tenho experiência com notes assim. Eu acho que você poderia configurar o xorg.conf para que as duas saídas fiquem ligadas o tempo todo, mas acho que assim o note consome mais energia. Desculpe a resposta meio inútil, é só para lembrar que esse assunto é totalmente dependende do driver de vídeo. -- Bruno Schneider http://www.dcc.ufla.br/~bruno/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Controle de banda e cache
O shaper é o cbq. Procure tutoriais do CBQ, que você vai encontrar datados de 2004 para lá, mas não há problema pois a configuração é mesma. -- Atenciosamente, Roberto Tikao Tsukamoto Júnior UNEMAT - Universidade do Estado de Mato Grosso Cáceres-MT -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: [OFF] compactando com o mencoder
2008/8/21 Miguel Da Silva - Centro de Matemática escreveu: Olha só, existem vários opções que você pode usar; fixed_quant, bitrate, zrquality, etc. Conhecer as várias opções nunca faz mal, mas se está com pressa, eu sugiro usar o bitrate (bits por segundo). Você decide qual o tamanho de arquivo você quer, divide pelo tempo do vídeo e pronto. -- Bruno Schneider http://www.dcc.ufla.br/~bruno/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: configuração de acentos no debian e windows
On Thu, Aug 21, 2008 at 4:41 PM, Carlos Alberto escreveu: Como eu configuro meu debian para quando eu visualizar nomes de arquivos, nomeados no windows, com acentos sejam visualizados no meu debian etch sem erros...! Não existe receita de bolo para isso. Windows não usa um único sistema de codificação. Linux não usa um único sistema de codificação. Tem bastante coisa sobre isso na lista. Sugiro que leia as discussões antigas na lista para aprender mais sobre o assunto e testar algumas coisas para tentar resolver o seu caso específico. -- Bruno Schneider http://www.dcc.ufla.br/~bruno/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: codificação de texto
On Fri, Aug 22, 2008 at 9:48 AM, Carlos Alberto perguntou mais uma vez: Qual a codificação de texto utilizada pelo windows, para que eu posso configurar o meu debian etch para vizualizar nomes de pastas e arquivos com acentos no linux... Carlos Alberto, vi no seu histórico que é um hábito seu repetir perguntas na lista quando não recebe resposta em pouco tempo. Para piorar repete a pergunta criando uma nova discussão. Você poderia fazer a gentileza de parar com isso? Atrapalha todo mundo! -- Bruno Schneider http://www.dcc.ufla.br/~bruno/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: atualizações debian etch
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Olá, Roberto Tikao Tsukamoto Júnior escreveu: Uma atualização menos arriscada e mais imediata poderia ser o repositório volatile. Vejam: http://www.tutolivre.net/volatile-clamav-e-spamassassin-atualizados-no-debian-40-etch/ http://www.debian.org/devel/debian-volatile/ O volatile não é uma suíte completa, como o stable, testing e o unstable. Longe disso, ele possui somente alguns poucos pacotes que se encaixam em critérios bem específicos. Por exemplo, softwares antivírus como o ClamAV e softwares antispam como o SpamAssassin. No caso do ClamAV, as vezes é necessário utilizarmos versões mais novas de uma engine de procura de vírus para que todas as regras de detecção de vírus possam ser usadas. No caso do SpamAssassin, nem sempre conseguimos utilizar as novas regras de detecção de spam com versões antigas do SpamAssassin, provavelmente porque as regras foram desenvolvidas fazendo uso de funcionalidades existentes somente em versões mais atuais do SpamAssassin. Como o Debian possui a política de não permitir versões novas de softwares na suíte stable, o repositório volatile foi criado para armazenar novas versões de softwares que se encaixem nessa categoria. - -- André Luís Lopes [EMAIL PROTECTED],debian}.org http://www.andrelop.org/blog/ Public GPG KeyID : 9D1B82F6 -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAkiu4m8ACgkQW4/i9Z0bgvY2JgCbB3gV+Yl8ihEjffmCxI+aKMIm ckwAnihHaF4QePc/SuPvRM2tsrJ03bhN =kDPg -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Servidor FTP
Adauto Serpa escreveu: Bom dia Pessoal, Qual programa vocês me indicariam para prover serviço de FTP. Dei uma procurada e costumam utilizar o proftpd. É o mais aconselhável e com bons recursos ? Eu costumo usar o Proftpd qdo o objetivo é ftp com autenticação ... E o vsftp qdo o intuito é ftp anônimo ... Nunca tive problemas de segurança com nenhum deles, mas eu nunca conseguí fazer o vsftp autenticar usuários em uma base sql, enquanto o proftpd é coisa de criança com Debian e similares ... Simplesmente instale o módulo ( no meu caso proftppgsql ) configurar e pronto ... Fábio Rabelo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Data e hora no SAMBA
Boa tarde pessoal Estou com uma dúvida referente a hora das estações windows no samba. O pessoal se loga no samba e a hora sempre fica adiantada, daí eu vou nas configurações de data e hora no windows e vejo que a opção de ajustar automaticamente a hora para horário de verão esta marcada, já fiz o teste desmarquei e no outro dia fui la e esta marcada novamente... Alguém sabe me ajudar? Muito obrigado Rafael
Liberando o msn9 no iptables
Olá, Estou tendo problemas em liberar o msn9 no iptables, as versões mais antigas funcionam sem problemas com estas regras: $IPT -A FORWARD -d 65.54.179.203 -j ACCEPT $IPT -A FORWARD -d 65.54.183.0/24 -j ACCEPT $IPT -A FORWARD -d 65.54.239.20 -j ACCEPT $IPT -A FORWARD -d 65.54.170.28 -j ACCEPT $IPT -A FORWARD -d 65.54.239.144 -j ACCEPT $IPT -A INPUT -s 0/0 -p tcp -m multiport --sport 1863,1864,6891,6900,6901,1863,5190,6901 -j ACCEPT $IPT -A INPUT -s 0/0 -p tcp -m multiport --dport 1863,1864,6891,6900,6901,1863,5190,6901 -j ACCEPT Mas o novo msn9 não conecta, eu tenho que deixa liberado o FORWARD para ele conecta. Alguém sabe o que pode ser? PaTricK -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Firefox 3 no Debian Etch, com Gtk2 2.10 e com Suporte a Temas.
Firefox 3 no Debian Etch, com Gtk2 2.10 e com Suporte a Temas. http://flavioblogg.blogspot.com/2008/08/firefox-3-no-debian-etch-com-gtk2-210-e.html -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Canada dictionary in OOo in Debian?
I found the following link very useful when I was getting the UK dictionary to work: http://wiki.eeeuser.com/howto:openofficeukdict John
Re: Canada dictionary in OOo in Debian?
On 08/21/08 18:09, Paul Johnson wrote: On Thu, 2008-08-21 at 13:52 -0500, Ron Johnson wrote: They're trying to tell you something... The Debian lists are not the place to be a racist bastard, Ron. Sure it is! Canada is Evil and must be DESTROYED -- Ron Johnson, Jr. Jefferson LA USA Do not bite at the bait of pleasure till you know there is no hook beneath it. -- Thomas Jefferson -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: acer driver
Wayne Topa wrote: Jonathan Kaye wrote: Wayne Topa wrote: If it came with WindBloz did it include a CD with software for that card? Does it have any software for that card installed? Did the card work in WindBloz? If you have WindBloz software for it you might get it working using the ndiswrapper package. Hi again Wayne, On the Acer website they do have the Windows XP driver for the Aspire 3500. It's called Atheros Wireless LAN B+G Driver 4.0.0.14001. I can give it a try with ndiswrapper. Cheers, Jonathan Sure you can. Get that and the ndiswrapper (which I have not used) and go for it!! Good Find Jonathan!! Wayne More info: 1. dmesg results seem to be good: [ 14.270854] ndiswrapper version 1.53 loaded (smp=yes, preempt=no) [ 14.358992] ndiswrapper: driver net5211 (,11/15/2006,5.1.1.9) loaded [ 14.359358] ndiswrapper :00:0b.0: enabling device (0010 - 0012) [ 14.359593] ndiswrapper (ZwClose:2198): closing handle 0xf78975a8 not implemented [ 14.969994] ndiswrapper: using IRQ 17 [ 15.196018] usbcore: registered new interface driver ndiswrapper [ 15.186802] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK 2. ifconfig seems more like you described. Entries only for eth0, lo and wlan0. wlan0 looks like this: wlan0 Link encap:Ethernet HWaddr 00:0e:9b:cf:bc:0c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 Memory:e201-e202 Cheers, Jonathan -- Registerd Linux user #445917 at http://counter.li.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Canada dictionary in OOo in Debian?
On Thu, 2008-08-21 at 16:10 -0700, Paul Johnson wrote: On Thu, 2008-08-21 at 15:04 -0700, consultores1 wrote: I'm having the same situation, it looks that the Canadian dictionary doesn't exist yet! and by default it use U.S. dictionary. My preference in this case is to use British dictionary, but i can't. Make sure the en-gb packages are installed? OK, thanks so much. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Call me now +226 78 03 96 12 If I can Trust You.
I have a new email address!You can now email me at: [EMAIL PROTECTED] Iam Ahmed DIALLO, a staff of Bank Of Africa I want to transfer US$14 Million to your account. - Ahmed Diallo
Traffic Mirroring for Debugging
Hi, In one of our servers, I want to debug a network server daemon. The problem is I don't have luxury for a downtime or to iterrupt related server's network traffic. Current routing structure looks like below. VPN Switch (192.168.1.1) - Server Machine (192.168.1.2) To debug the related server daemon, I planned to redirect the network traffic to a second sandbox server. Planned routing structure is: VPN Switch (192.168.1.1) | +- Temporary Linux Machine (192.168.1.10) || |+- Server Machine (192.168.1.2) +-- Sandbox Server Machine (192.168.1.20) For test purposes, I configured a client to connect to 192.168.1.10 (instead of actual server, 192.168.1.2). But I couldn't manage to redirect incoming traffic of 192.168.1.10 to 192.168.1.2 and 192.168.2.20 machines. How can I get such a mirrored redirection? Furthermore, I first considered using DNAT of iptables, but learnt that it doesn't support multiple destinations without load-balancing. Anyway, I wanted to give it a try for just a single machine. I connected to 1.10 machine and typed below iptables command: # iptables -t nat -A PREROUTING -d 192.168.1.10 -j DNAT --to-destination 192.168.1.20 # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination DNAT 0-- 0.0.0.0/0192.168.1.10 to:192.168.1.20 Chain POSTROUTING (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination And started a netcat listener on 1.20 machine: # nc -l -p 2310 Then tried to connect to the started nc listener from 1.10 machine: # nc -vvv 192.168.1.10 2310 192.168.1.10: inverse host lookup failed: Unknown host (UNKNOWN) [192.168.1.10] 2310 (?) : Connection refused sent 0, rcvd 0 Gosh! Even couldn't manage to make DNAT for a single address work properly. Any helps will be really really appreciated. Regards. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Traffic Mirroring for Debugging
Why don't you bridge the interfaces of 192.168.1.10 ? In that case, you need to reconfigure client to point to 192.168.1.20 and you can sniff your network via the 192.168.1.10 machine ? Hope this helps, Christophe Volkan YAZICI a écrit : Hi, In one of our servers, I want to debug a network server daemon. The problem is I don't have luxury for a downtime or to iterrupt related server's network traffic. Current routing structure looks like below. VPN Switch (192.168.1.1) - Server Machine (192.168.1.2) To debug the related server daemon, I planned to redirect the network traffic to a second sandbox server. Planned routing structure is: VPN Switch (192.168.1.1) | +- Temporary Linux Machine (192.168.1.10) || |+- Server Machine (192.168.1.2) +-- Sandbox Server Machine (192.168.1.20) For test purposes, I configured a client to connect to 192.168.1.10 (instead of actual server, 192.168.1.2). But I couldn't manage to redirect incoming traffic of 192.168.1.10 to 192.168.1.2 and 192.168.2.20 machines. How can I get such a mirrored redirection? Furthermore, I first considered using DNAT of iptables, but learnt that it doesn't support multiple destinations without load-balancing. Anyway, I wanted to give it a try for just a single machine. I connected to 1.10 machine and typed below iptables command: # iptables -t nat -A PREROUTING -d 192.168.1.10 -j DNAT --to-destination 192.168.1.20 # iptables -L -n -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination DNAT 0-- 0.0.0.0/0192.168.1.10 to:192.168.1.20 Chain POSTROUTING (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination And started a netcat listener on 1.20 machine: # nc -l -p 2310 Then tried to connect to the started nc listener from 1.10 machine: # nc -vvv 192.168.1.10 2310 192.168.1.10: inverse host lookup failed: Unknown host (UNKNOWN) [192.168.1.10] 2310 (?) : Connection refused sent 0, rcvd 0 Gosh! Even couldn't manage to make DNAT for a single address work properly. Any helps will be really really appreciated. Regards. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Errors DirMngr
On Wed, Aug 20, 2008 at 9:21 PM, Sven Joachim [EMAIL PROTECTED] wrote: Zaki, can you install lsb-base version 3.2-20 and retry? Dear Sven, when I choose testing, the lsb-base version which installed is 3.2-19 Then I choose to change to unstable. Actually it's not good solution -- Zaki Akhmad -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Traffic Mirroring for Debugging
On Fri, 22 Aug 2008, Bonnel Christophe [EMAIL PROTECTED] writes: Why don't you bridge the interfaces of 192.168.1.10? I don't have in depth experience with bridging, would you mind explaining a little bit about it please. (Example tutorial pointers will be appreciated.) In that case, you need to reconfigure client to point to 192.168.1.20 and you can sniff your network via the 192.168.1.10 machine? What I really need is not spoofing, I need to somehow redirect identical network traffic to a second machine. Applications are running on Microsoft Windows Servers on 1.2 and 1.20. Is bridging in the way you mentioned capable of doing such a thing? Regards. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Errors DirMngr
On 2008-08-22 10:39 +0200, Zaki Akhmad wrote: On Wed, Aug 20, 2008 at 9:21 PM, Sven Joachim [EMAIL PROTECTED] wrote: Zaki, can you install lsb-base version 3.2-20 and retry? Dear Sven, when I choose testing, the lsb-base version which installed is 3.2-19 Then I choose to change to unstable. Actually it's not good solution You don't have to switch your whole system to unstable, and I did not suggest that you do. Just downloading the lsb-base package from packages.debian.org and installing it with dpkg -i would have been sufficient. Sven -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
F/OSS Repository
Hello all I am from Indonesia. I would like know, F/OSS repository besides sourceforge. Can somebody mention other F/OSS repository? Thanks -- Zaki Akhmad -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: xorg update clobbers Nvidia GL
On Sat, 2008-08-16 at 13:56 -0500, Jordi Gutiérrez Hermoso wrote: 2008/8/16 Patrick Wiseman [EMAIL PROTECTED]: If I use nvidia-installer to UNinstall the drivers, Btw, the installer from nvidia's website doesn't play nicely with Debian's packaging system, as you have seen. The Debian way to do it is something like this: Actually, the list is even shorter than you think: a-i does quite a lot. update-pciids m-a a-i nvidia depmod -a modprobe nvidia dpkg-reconfigure xserver-xorg -- Paul Johnson [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part
Re: [OFF] TMDA
On Tue, 2008-08-19 at 15:15 -0300, Márcio Luciano Donada wrote: Hi People, I have a serious problem and has researched in several places and found no answer. The problem is the following, I move an e-mail to test for the user and sends the same e-mail from tmda asking for confirmation that only after I respond to confirmation it sends back another email asking Again the confirmation. To take the doubt, follow the doc and the tmda main.cf added in the line: TMDA is considered harmful and was removed from Debian quite some time ago. Please don't use it. http://linuxmafia.com/faq/Mail/challenge-response.html -- Paul Johnson [EMAIL PROTECTED] signature.asc Description: This is a digitally signed message part
Re: Traffic Mirroring for Debugging
I suppose you have multiples interfaces on your 192.168.1.10. Normally, you have multiple IP addresses on your 192.168.1.10, one address for each interface. If you bridge interfaces, all your interfaces will have one and only one IP address 192.168.1.10. If you prefer, your machine (192.168.1.10) will work as switch. You can see the beginning of this article (no need to use the firewall part, use only D1 or D2 depending on your configuration): http://www.debian.org/doc/manuals/securing-debian-howto/ap-bridge-fw.en.html Search also on google with debian+bridge. I'm french and I have many links but only in my language. HTH, Christophe Volkan YAZICI a écrit : On Fri, 22 Aug 2008, Bonnel Christophe [EMAIL PROTECTED] writes: Why don't you bridge the interfaces of 192.168.1.10? I don't have in depth experience with bridging, would you mind explaining a little bit about it please. (Example tutorial pointers will be appreciated.) In that case, you need to reconfigure client to point to 192.168.1.20 and you can sniff your network via the 192.168.1.10 machine? What I really need is not spoofing, I need to somehow redirect identical network traffic to a second machine. Applications are running on Microsoft Windows Servers on 1.2 and 1.20. Is bridging in the way you mentioned capable of doing such a thing? Regards. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
ATMAIL
Does anyone know where I can find the @mail open? I only have @mail demo on my desktop. Greatly appreciated! -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: chkrootkit hidden processes possible LKM Trojan.
Wackojacko on 21/08/08 20:32, wrote: Adam Hardy wrote: However, using #chkrootkit -x lkm and #/usr/lib/chkrootkit/chkproc -v -v Wacko, you haven't got a script that does that have you? (Identifying the process that is hidden from /proc/PID?) Seems a bit laborious doing it manually more than once. As per my original mail above, these two commands will show you the hidden processes. First one asks chkrootkit why it thinks there is an LKM Trojan on the system. Second one is the helper script run by chkrootkit that lists the hidden processes but can be run directly. I am still seeing output from these commands, but the daily chkrootkit email warning of LKM Trojan has now disappeared!! Thanks for the low-down on chkrootkit. That's the same behaviour from chkrootkit that I am seeing too. In my case the hidden processes are all java, children of the process that is listed by ps. It reminds me of an old bug with java and linux where ps would show multiple processes for the java process. I doubt it's related to this issue but it makes me suspect a bug. Regards Adam -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
After upgrade, FCKeditor no longer working in moinmoin 1.7.1
Hi All, I recently updated my moinmoin to 1.7.1. However, FCKeditor seems no longer to be installed. In the README I read that it is supplied as an example and that one can reinstate it at your own risk. However, there's no information how to 'reinstate' it. Has anyone done this before ? How do I do this ? Thanks in advance, Peter. -- Peter Van Biesen Sysadmin VAPH tel: +32 (0) 2 225 85 70 fax: +32 (0) 2 225 85 88 e-mail: [EMAIL PROTECTED] PGP: http://www.vaph.be/pgpkeys signature.asc Description: This is a digitally signed message part.
Re: No internal mic on the dell XPS M1330 laptop
Thanks for the suggestion, but no, it still doesn't work. Sjoerd Magnus Pedersen wrote: Sjoerd Hardeman wrote: Hi, I am unable to get the internal microphone to work on my dell XPS M1330 laptop. Has anybody succeeded in doing so? For the obvious answers: yes, I have googled, and have tried lots of different settings in option snd_hda_intel model=... settings in /etc/modprobe.d/alsa-base. The result is that I didn't get it to work. So I think I'm looking for a less obvious answer. Can anybody help me with this? Sjoerd Hardeman Have you tried building alsa with module-assistent? The drivers in that packages is usually newer than the kernel-ones? /Magnus signature.asc Description: OpenPGP digital signature
Re: F/OSS Repository
On 08/22/08 03:56, Zaki Akhmad wrote: Hello all I am from Indonesia. I would like know, F/OSS repository besides sourceforge. Can somebody mention other F/OSS repository? Why exactly are you asking? Do you not trust sourceforge to stay free? -- Ron Johnson, Jr. Jefferson LA USA Do not bite at the bait of pleasure till you know there is no hook beneath it. -- Thomas Jefferson -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
cannot open display: :0.0 error when using schroot
I have set up a schroot using this guide: http://alioth.debian.org/docman/view.php/30192/21/debian-amd64-howto.html#id292205 , but for some reason when I try to run a program I get the following error: ~$ schroot -p nero W: Group ‘sbuild’ not found I: [sid chroot] Running command: “nero” (nero:456): Gtk-WARNING **: cannot open display: :0.0 I have set up a succesfull schroot before, the only difference now is that I use sudo. DISPLAY=:0 doesn't work either: (sid32)[EMAIL PROTECTED]:/# export DISPLAY=:0 (sid32)[EMAIL PROTECTED]:/# nero (nero:4231): Gtk-WARNING **: cannot open display: :0 My schroot.conf [sid] description=Debian sid (unstable) location=/var/chroot/sid priority=3 users=rleigh,aniruddha groups=sbuild,aniruddha root-groups=root aliases=unstable,default Regards, Aniruddha -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: F/OSS Repository
On Fri, Aug 22, 2008 at 03:56:40PM +0700, Zaki Akhmad wrote: Hello all I am from Indonesia. I would like know, F/OSS repository besides sourceforge. Can somebody mention other F/OSS repository? SourceForge is not merely a repository. Its main role is a development infrastructure. There are a number of other somewhat similar sites. e.g.: http://berlios.deb , http://savana.gnu.org/ (both based originally on Sourceforge/GForge), Google Code, Cannonical's tool, and Microsolt's CodePlex. There are also various more specialized sites. Many of them based on GForge. -- Tzafrir Cohen | [EMAIL PROTECTED] | VIM is http://tzafrir.org.il || a Mutt's [EMAIL PROTECTED] || best ICQ# 16849754 || friend -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: trying to get tyan s2895 audio working --tyan support does not like debian.....help.
On Thu, Aug 21, 2008 at 21:28:48 -0400, Michael Habashy wrote: On Wed, Aug 20, 2008 at 14:46:06 -0400, Michael Habashy wrote: after being on the phone with Tyan -- i have realized how useless they are. I am trying to get the audio working on the board. I have a debain 4.0 AMD 64 version. i did an lspci on my server and got this: [...] 00:04.0 Multimedia audio controller: nVidia Corporation CK804 AC'97 Audio Controller (rev a2) [...] rider:/# lsmod | grep snd snd_usb_audio 88736 0 You don't seem to have an active USB audio card, so why is this module loaded? Did you add it to /etc/modules? (The presence of this module should not hurt, but it is better if we understand why it is loaded.) [...] snd_intel8x0 39592 4 snd_ac97_codec106456 1 snd_intel8x0 snd_ac97_bus7296 1 snd_ac97_codec snd_pcm_oss48672 0 snd_mixer_oss 21888 1 snd_pcm_oss snd_pcm89096 6 snd_usb_audio,snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_timer 29192 4 snd_seq,snd_pcm snd65256 16 snd_usb_audio,snd_seq_oss,snd_seq,snd_rawmidi,snd_seq_device,snd_hwdep,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 15392 1 snd snd_page_alloc 15504 2 snd_intel8x0,snd_pcm This looks OK. rider:/# cat /dev/sndstat Sound Driver:3.8.1a-980706 (ALSA v1.0.12rc1 emulation code) Kernel: Linux rider 2.6.18-6-amd64 #1 SMP Mon Jun 16 22:30:01 UTC 2008 x86_64 Config options: 0 Installed drivers: Type 10: ALSA emulation Card config: NVidia CK804 with AD1981B at 0xb0002000, irq 209 Audio devices: 0: NVidia CK804 (DUPLEX) Synth devices: NOT ENABLED IN CONFIG Midi devices: NOT ENABLED IN CONFIG Timers: 7: system timer Mixers: 0: Analog Devices AD1981B rider:/# cat /proc/asound/cards 0 [CK804 ]: NFORCE - NVidia CK804 NVidia CK804 with AD1981B at 0xb0002000, irq 209 That all seems to be fine, so what is the problem, the volume level? I would log in at a terminal without starting X (or without logging in with [xkg]dm if you normally use graphical login), and then run speaker-test -t sine If that starts without errors, keep it running, go to another terminal (e.g. CTRL+ALT+F2), log in and start alsamixer. Experiment with the volume levels (CURSOR UP/DOWN and LEFT/RIGHT), especially Master and PCM, until you hear the sound from speaker-test at an adequate volume. (Use ESC if you want to exit alsamixer.) Does that work? -- Regards,| http://users.icfo.es/Florian.Kulzer Florian | -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Turning off touchpad scroll
On Thu, Aug 21, 2008 at 04:21:36PM -0400, Curt Howland wrote: On Thursday 21 August 2008, Andrew Sackville-West [EMAIL PROTECTED] was heard to say: just put the missing stuff back into xorg.conf, as a start. X still respects those settings, so far as I know, it just doesn't *need* them anymore. I tried that, no joy. I tried copying in the Synaptics device, just like in the previous xorg.conf, and also as settings inside the configured mouse. Neither made any difference. I also discovered that while KDE will let me change the magnitude of the scroll events, it will not allow me to turn them off. I cannot set scroll to 0, only 1 or more. On Thursday 21 August 2008, Felipe Gallois [EMAIL PROTECTED] was heard to say: it seems that the synaptics drivers are not installed by default in laptops anymore Yet this is what is in /var/log/Xorg.0.log: (II) Synaptics touchpad driver version 0.14.6 (1406) (--) AlpsPS/2 ALPS GlidePoint auto-dev sets device to /dev/input/event8 (**) Option Device /dev/input/event8 (--) AlpsPS/2 ALPS GlidePoint touchpad found (**) AlpsPS/2 ALPS GlidePoint: always reports core events (II) XINPUT: Adding extended input device AlpsPS/2 ALPS GlidePoint (type: MOUSE) (--) AlpsPS/2 ALPS GlidePoint auto-dev sets device to /dev/input/event8 (**) Option Device /dev/input/event8 (--) AlpsPS/2 ALPS GlidePoint touchpad found so it seems that it is in fact getting loaded. The old configuration is just being ignored. Have you set up the ServerLayout Section in your /etc/X11/xorg.conf? I'm not shure if it will help, but I think, as I configured some other things with the touchpad, it just worked after doing this. With the best greetings Richard -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Lenny users: attn about Gnome/libxml2 breakage
Today I did the usual dist-upgrade for my testing install, and it left me with a badly broken (from user's perspective) installation, because basically all Gnome applications stopped working. After a bit over 2 hours worth of investigation, I've found out how to solve the issue; since I first looked here and didn't find anything gnome related, I'm sending this to the list for the casual other victim. Symptom: Gnome apps just hang, without outputting anything to stdout/stderr (or .xsession-errors if started through the menu). Problem: the apps segfault inside libxml2, and thereafter enter a deadlocked state in a mutex (or in a select call); the former is apparently a bug in libxml2, the latter seems to be the Gnome functionality to pop up a windows which seems to have an issue on it's own (so it's really two bugs happening here, obscuring the investigation a bit.) Solution: install libxml2 from unstable; this is actually a downgrade (from libxml2 2.6.32.dfsg-2+lenny to 2.6.32.dfsg-2). I.e. apt-get install -t unstable libxml2/unstable, but you need to have the unstable sources in apt.sources and use apt pinning (I won't explain that here, check other sources). Cheers, Christian. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Replication datas in cluster
Hello, I have been configured the drbd+hearbeat. If the cluster2 (master) is off, the cluster1 (slave) take all resources of cluster2. But if cluster2 is up, it receive all resources, and datas, but the datas not come to cluster2, and the /home is not mounted in cluster1. How I can to do the datas created in cluster1 go to cluster2 ? Best regards, Faria Novos endereços, o Yahoo! que você conhece. Crie um email novo com a sua cara @ymail.com ou @rocketmail.com. http://br.new.mail.yahoo.com/addresses -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: acer driver
Jonathan Kaye wrote: Wayne Topa wrote: Jonathan Kaye wrote: Wayne Topa wrote: If it came with WindBloz did it include a CD with software for that card? Does it have any software for that card installed? Did the card work in WindBloz? If you have WindBloz software for it you might get it working using the ndiswrapper package. Hi again Wayne, On the Acer website they do have the Windows XP driver for the Aspire 3500. It's called Atheros Wireless LAN B+G Driver 4.0.0.14001. I can give it a try with ndiswrapper. Cheers, Jonathan Sure you can. Get that and the ndiswrapper (which I have not used) and go for it!! Good Find Jonathan!! Wayne More info: 1. dmesg results seem to be good: [ 14.270854] ndiswrapper version 1.53 loaded (smp=yes, preempt=no) [ 14.358992] ndiswrapper: driver net5211 (,11/15/2006,5.1.1.9) loaded [ 14.359358] ndiswrapper :00:0b.0: enabling device (0010 - 0012) [ 14.359593] ndiswrapper (ZwClose:2198): closing handle 0xf78975a8 not implemented [ 14.969994] ndiswrapper: using IRQ 17 [ 15.196018] usbcore: registered new interface driver ndiswrapper [ 15.186802] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK 2. ifconfig seems more like you described. Entries only for eth0, lo and wlan0. wlan0 looks like this: wlan0 Link encap:Ethernet HWaddr 00:0e:9b:cf:bc:0c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 Memory:e201-e202 Cheers, Jonathan You are nearly there now. I would suggest you read (print) all of the UserDocs from the madwifi site. I bound my copies and used them quite a bit when I get started. Get your /etc/network/interfaces setup using those docs and refer, if needed, to the debian-reference (you have installed that, right), and you are in the pink. I haven't checked lately but there are some debian realated pages in the UserDocs you might find interesting. Way to go Jonathan! Wayne -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Errors DirMngr
On Fri, Aug 22, 2008 at 3:54 PM, Sven Joachim [EMAIL PROTECTED] wrote: You don't have to switch your whole system to unstable, and I did not suggest that you do. Just downloading the lsb-base package from packages.debian.org and installing it with dpkg -i would have been sufficient. I just got frustrated yesterday, and change to testing. Thanks Sven for your advice. -- Zaki Akhmad -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Debian marketing team
Hi everybody! The Debian Marketing Team is real. It just didnt get alot rolling yet and no processes in place to work on anything. But better late then never! We look for people (both Debian Developers, Maintaners or Users) around the world who are interested in helping. * It would be good to collect Debian related News centrally (wiki) and depending on its content and impact spread them locally or globally. * We need to put together plan and understand both who uses Debian and where Debian would fit in well and should be used. For that we need marketing savvy people. We want to meet and work on this. Have you been to Extremadura yet? Do you want to go there? Sightseeing not included. We started putting together ideas at http://wiki.debian.org/Marketing, will use the existing mailing list [EMAIL PROTECTED] and the irc channel #debian-marketing on irc.debian.org for communication. Moritz and Andreas signature.asc Description: Digital signature
(Solved) Re: Turning off touchpad scroll
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Thursday 21 August 2008, Curt Howland was heard to say: But now, after the change in X where most of the specific configuration options are autodetected, I'm back to having scroll areas. Ok, here's the solution: I had to add back the Server Layout section, as well as the Synaptics Touchpad section, into the new minimalist autoconfigured xorg.conf: Section InputDevice Identifier Synaptics Touchpad Driver synaptics Option SendCoreEventstrue Option Device/dev/psaux Option Protocol auto-dev Option VertEdgeScrollfalse Option HorizEdgeScroll false EndSection Section ServerLayout Identifier Default Layout Screen Default Screen InputDevice Generic Keyboard InputDevice Synaptics Touchpad EndSection so that the generic mouse would not be used. Without adding the Server Layout section, X always chooses the generic mouse, even if the Generic Mouse section is commented out. Unlike more recent touch pads, my 5-year old laptop has a smallish touchpad, so I continually ran into the scroll areas, causing switching between tabs in Konqueror, or bringing up many minimized applications if the mouse was over the task list. Hooray! So there are three things I must add to the xorg.conf: Synaptics Touchpad section, Server Layout section, and Driver nvidia to the Device section. But it is still a much, much more simplified xorg.conf than it was, that's for sure. Thanks to both of you for suggesting trains of inquiry, Curt- - -- Treason! http://blog.mises.org/archives/007926.asp -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.9 (GNU/Linux) iQEVAwUBSK7DXi9Y35yItIgBAQKaqgf/QH/g72qoKFRItzfA54eAXPlL4zBah10Z tcUUgronIQViLo9v5pLbUL8wz2+5wbpqu7gNHfmSVZ1fB1NTE0K11nmEf7ZJDVHB YYGH6nUmo7NzezbJxl1c+lz48yLBf8FQdXO6AvVaSeL42+4wG5W9bomZIsp/pOxb wK+XjzQozMPNpkhXpFEsKHG1NQY0Qwfx4oQFfNtDaSz9P86gFZHQS1XPs5eATnx1 J+6BNczp+uJ9jz/GbmwJgENkpRD2WFLXssQDUzAFO5uMBCmBACNNAqN69Iw2Ef9r BV4vX0U2JIKQCtbi8eSTvJM+pOO2O6UAU4FkOWAiID/YN/mJWFCXQA== =pdBh -END PGP SIGNATURE- -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: ATMAIL
On 08/22/2008 11:11 AM, Rod James Bio wrote: Does anyone know where I can find the @mail open? I only have @mail demo on my desktop. Greatly appreciated! You've obviously missed it, but there is a very useful service for searching the web. It's called 'google'. If you type atmail open (without the quotes) in the right top text box of your browser and press enter, you just have to follow the first link on the resulting page Good luck! Johannes signature.asc Description: OpenPGP digital signature
Re: acer driver
Wayne Topa wrote: You are nearly there now. I would suggest you read (print) all of the UserDocs from the madwifi site. I bound my copies and used them quite a bit when I get started. Get your /etc/network/interfaces setup using those docs and refer, if needed, to the debian-reference (you have installed that, right), and you are in the pink. I haven't checked lately but there are some debian realated pages in the UserDocs you might find interesting. Way to go Jonathan! Wayne Thanks a lot Wayne. I found an AP near our flat and we'll be able to got there and try to get the thing connected. There hardest part is being sure the correct driver is installed correctly. The results from ifconfig seem to be ok and iwconfig wlan0 also produced reasonable results. Anyway we'll have a go at connecting to an open network tomorrow. Cheers, Jonathan -- Registerd Linux user #445917 at http://counter.li.org/ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: udev and kernel (testing)
Hello all - I officially retract my clueless email. Sorry about that. :^( +-+ Glenn Becker - [EMAIL PROTECTED] SDF Public Access UNIX System - http://sdf.lonestar.org +-+ -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: F/OSS Repository
Zaki Akhmad wrote: Hello all I am from Indonesia. I would like know, F/OSS repository besides sourceforge. Can somebody mention other F/OSS repository? More an index than a repository, but if you're just looking for software to use: http://freshmeat.net/ - Chris -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: F/OSS Repository
2008/8/22 Zaki Akhmad [EMAIL PROTECTED] I would like know, F/OSS repository besides sourceforge. Can somebody mention other F/OSS repository? For a list, see http://en.wikipedia.org/wiki/Comparison_of_free_software_hosting_facilities -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Lenny users: attn about Gnome/libxml2 breakage
I realize that the suggestion I wrote about undoes a security fix. So, don't do what I said, do something different (what about going outside and enjoying a walk?). Well ok, the issue said to be fixed is only a DoS (of course ironically it introduces another DoS ;). Thanks in advance to the security team for fixing the fixes. Thanks, Christian. Christian Jaeger wrote: Today I did the usual dist-upgrade for my testing install, and it left me with a badly broken (from user's perspective) installation, because basically all Gnome applications stopped working. After a bit over 2 hours worth of investigation, I've found out how to solve the issue; since I first looked here and didn't find anything gnome related, I'm sending this to the list for the casual other victim. Symptom: Gnome apps just hang, without outputting anything to stdout/stderr (or .xsession-errors if started through the menu). Problem: the apps segfault inside libxml2, and thereafter enter a deadlocked state in a mutex (or in a select call); the former is apparently a bug in libxml2, the latter seems to be the Gnome functionality to pop up a windows which seems to have an issue on it's own (so it's really two bugs happening here, obscuring the investigation a bit.) Solution: install libxml2 from unstable; this is actually a downgrade (from libxml2 2.6.32.dfsg-2+lenny to 2.6.32.dfsg-2). I.e. apt-get install -t unstable libxml2/unstable, but you need to have the unstable sources in apt.sources and use apt pinning (I won't explain that here, check other sources). Cheers, Christian. -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Lenny users: attn about Gnome/libxml2 breakage
Christian Jaeger wrote: Thanks in advance to the security team for fixing the fixes. PS. in case it's needed here is some information: - System is x86_64, core 2 duo - see attached backtraces from two Gnome apps (xchat segfaulted too, as did Ekiga iirc). Christian. #0 0x7f6038aa95c8 in _int_free (av=0x7f6038d829e0, mem=0xc9ad10) at malloc.c:4663 #1 0x7f6038aa9a76 in *__GI___libc_free (mem=0xc9ad10) at malloc.c:3626 #2 0x7f603c54f065 in xmlParseEntityDecl__internal_alias (ctxt=0xcb1700) at parser.c:4809 #3 0x7f603c54f7e6 in xmlParseMarkupDecl__internal_alias (ctxt=0x7f6038d829e0) at parser.c:5947 #4 0x7f603c54f87e in xmlParseInternalSubset (ctxt=0xcb1700) at parser.c:7310 #5 0x7f603c550626 in xmlParseChunk__internal_alias (ctxt=0xcb1700, chunk=value optimized out, size=value optimized out, terminate=0) at parser.c:10782 #6 0x7f602bac4cd0 in ?? () from /usr/lib/librsvg-2.so.2 #7 0x7f602bcf0d7c in ?? () from /usr/lib/gtk-2.0/2.10.0/loaders/svg_loader.so #8 0x7f603a5d4c99 in IA__gdk_pixbuf_loader_write (loader=0xb28ea0, buf=0xc94180 ?xml version=\1.0\ encoding=\utf-8\?\n!-- Generator: Adobe Illustrator 10.0.3, SVG Export Plug-In . SVG Version: 3.0.0 Build 77) --\n!DOCTYPE svg PUBLIC \-//W3C//DTD SVG 1.0//EN\\http://www.w3;..., count=4082, error=0xcc8528) at /scratch/build-area/gtk+2.0-2.12.11/gdk-pixbuf/gdk-pixbuf-loader.c:475 #9 0x7f603ab9c530 in icon_info_ensure_scale_and_pixbuf (icon_info=0xcc84f0, scale_only=value optimized out) at /scratch/build-area/gtk+2.0-2.12.11/gtk/gtkicontheme.c:2743 #10 0x7f603ab9cac2 in IA__gtk_icon_info_load_icon (icon_info=0x7f6038d829e0, error=0x7fff450e9f30) at /scratch/build-area/gtk+2.0-2.12.11/gtk/gtkicontheme.c:2907 #11 0x7f603ab9e98e in IA__gtk_icon_theme_load_icon (icon_theme=value optimized out, icon_name=0x7f603ad27676 gtk-cancel, size=20, flags=GTK_ICON_LOOKUP_USE_BUILTIN, error=0x7fff450e9f30) at /scratch/build-area/gtk+2.0-2.12.11/gtk/gtkicontheme.c:1505 #12 0x7f603ab99eae in IA__gtk_icon_set_render_icon (icon_set=0x9fec50, style=0xa57000, direction=GTK_TEXT_DIR_LTR, state=GTK_STATE_NORMAL, size=GTK_ICON_SIZE_BUTTON, widget=0x9e5650, detail=0x0) at /scratch/build-area/gtk+2.0-2.12.11/gtk/gtkiconfactory.c:1466 #13 0x7f603acefa71 in IA__gtk_widget_render_icon (widget=0x9e5650, stock_id=value optimized out, size=GTK_ICON_SIZE_BUTTON, detail=0x0) at /scratch/build-area/gtk+2.0-2.12.11/gtk/gtkwidget.c:6459 #14 0x7f603abaf5c1 in gtk_image_calc_size (image=0x7f6038d829e0) at /scratch/build-area/gtk+2.0-2.12.11/gtk/gtkimage.c:1946 #15 0x7f603abaf689 in gtk_image_size_request (widget=0x7f6038d829e0, requisition=0x7f6038b518d8) at /scratch/build-area/gtk+2.0-2.12.11/gtk/gtkimage.c:1987 #16 0x7f60397fbe0f in IA__g_closure_invoke (closure=0x766700, return_value=0x0, n_param_values=2, param_values=0x7fff450ea250, invocation_hint=0x7fff450ea150) at /build/buildd/glib2.0-2.16.4/gobject/gclosure.c:490 #17 0x7f603980e538 in signal_emit_unlocked_R (node=0x9b0cf0, detail=0, instance=0x9e5650, emission_return=0x0, instance_and_params=0x7fff450ea250) at /build/buildd/glib2.0-2.16.4/gobject/gsignal.c:2370 #18 0x7f6039810116 in IA__g_signal_emit_valist (instance=0x9e5650, signal_id=value optimized out, detail=0, var_args=0x7fff450ea4e0) at /build/buildd/glib2.0-2.16.4/gobject/gsignal.c:2199 #19 0x7f6039810482 in IA__g_signal_emit_by_name (instance=0x9e5650, detailed_signal=0x7f603adafed5 size_request) at /build/buildd/glib2.0-2.16.4/gobject/gsignal.c:2267 #20 0x7f603ac391f8 in _gtk_size_group_compute_requisition (widget=0x9e5650, requisition=0x7fff450ea610) at /scratch/build-area/gtk+2.0-2.12.11/gtk/gtksizegroup.c:820 #21 0x7f603ab921f6 in gtk_hbox_size_request (widget=0xc1f2a0, requisition=0xc1f2d8) at /scratch/build-area/gtk+2.0-2.12.11/gtk/gtkhbox.c:97 #22 0x7f60397fbe0f in IA__g_closure_invoke (closure=0x766700, return_value=0x0, n_param_values=2, param_values=0x7fff450ea8a0, invocation_hint=0x7fff450ea7a0) at /build/buildd/glib2.0-2.16.4/gobject/gclosure.c:490 #23 0x7f603980e538 in signal_emit_unlocked_R (node=0x9b0cf0, detail=0, instance=0xc1f2a0, emission_return=0x0, instance_and_params=0x7fff450ea8a0) at /build/buildd/glib2.0-2.16.4/gobject/gsignal.c:2370 #24 0x7f6039810116 in IA__g_signal_emit_valist (instance=0xc1f2a0, signal_id=value optimized out, detail=0, var_args=0x7fff450eab30) at /build/buildd/glib2.0-2.16.4/gobject/gsignal.c:2199 #25 0x7f6039810482 in IA__g_signal_emit_by_name (instance=0xc1f2a0, detailed_signal=0x7f603adafed5 size_request) at /build/buildd/glib2.0-2.16.4/gobject/gsignal.c:2267 #26 0x7f603ac391f8 in _gtk_size_group_compute_requisition (widget=0xc1f2a0, requisition=0x7fff450eac60) at /scratch/build-area/gtk+2.0-2.12.11/gtk/gtksizegroup.c:820 #27
libjpeg6b-6 source
Hi, Recently I found source for libjpeg 6b-6 in http://ftp.handhelds.org/mirror/Debian-snapshot-2003-08-28/Debian/pool/main/libj/libjpeg6b/ However this source is not available at ftp://ftp.uu.net/graphics/jpeg/ http://www.ijg.org/files/ Does anyone know which is the official place to look for all libjpeg releases? -- Regards, Ashish There are 10 types of people; those who understand binary, and those who don't -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
instant drawing of virtual terminal
How can I make new screenfulls of text get drawn instantly in a virtual console, rather than having to wait for the text to scroll up. For example when paging with less, I have to wait for the entire screen to scroll up until I can read the new text, and this takes a long time when my cpu is under heavy load. Thank You.
Re: Network Bandwitch incremental and less
I recently installed Lenny on my laptop, the strange thing is that I have the speed sheet dynamics I went from 60 Mbytes a few KByte. We've need other info. The internet connection is direct or you using a modem/router? Pol -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: libjpeg6b-6 source
On Fri, Aug 22, 2008 at 08:42:05PM +0530, Ashish Yadav wrote: Hi, Recently I found source for libjpeg 6b-6 in http://ftp.handhelds.org/mirror/Debian-snapshot-2003-08-28/Debian/pool/main/libj/libjpeg6b/ However this source is not available at ftp://ftp.uu.net/graphics/jpeg/ http://www.ijg.org/files/ Does anyone know which is the official place to look for all libjpeg releases? apt-get source libjpeg6 #? Alternatively: http://packages.debian.org/libjpeg6 http://packages.debian.org/search?keywords=libjpeg6 http://packages.debian.org/sid/libjpeg62 # and from the copyright link: http://packages.debian.org/changelogs/pool/main/libj/libjpeg6b/libjpeg6b_6b-14/libjpeg62.copyright -- Tzafrir Cohen | [EMAIL PROTECTED] | VIM is http://tzafrir.org.il || a Mutt's [EMAIL PROTECTED] || best ICQ# 16849754 || friend -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Unannounced kernel update today? (etch)
My systems informed me of a kernel update today, but I can't find any indication either on the security web site or the security-announce list that there has been one recently. The changelog for the package says: linux-2.6 (2.6.18.dfsg.1-22etch2) stable-security; urgency=high * bugfix/x86-wrong-register-was-used-in-align-macro.patch Fix regression introduced upstream by the fix for CVE-2008-0598 * bugfix/cifs-fix-compiler-warning.patch, bugfix/netfilter-nf_nat_snmp_basic-fix-range-check.patch Fix regressions introduced upstream by the fixes for CVE-2008-1673 * bugfix/sound-ensure-device-number-is-valid-in-snd_seq_oss_synth_make_info.patch Fix possible information leak in seq_oss_synth.c See CVE-2008-3272 * bugfix/vfs-fix-lookup-on-deleted-directory.patch Fix potential memory leak in lookup path See CVE-2008-3275 -- dann frazier [EMAIL PROTECTED] Mon, 18 Aug 2008 01:43:55 -0600 The last security kernel I see announced is from June 9th. I run my own local repositories, mirrored using rsync(sync once a day) - debmirror -v --nosource --method=rsync -r :debian -h mirrors.kernel.org --dist=etch /storage/debian/mirror/base debmirror -v --nosource --method=rsync -r :debian-security -h security.debian.org --dist=etch --section=updates/main,updates/contrib,updates/non-free --ignore-missing-release --ignore-release-gpg /storage/debian/mirror/security rsync -av rsync://security.debian.org/debian-security/dists/etch/updates/Release* /storage/debian/mirror/security/dists/etch/updates/ Maybe I'm just being overly paranoid ? thanks nate (been a few years since I've been on the list, still waiting for the list confirmation message that I'm subscribed) -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Unannounced kernel update today? (etch)
nate escreveu: My systems informed me of a kernel update today, but I can't find any indication either on the security web site or the security-announce list that there has been one recently. It was announced: http://lists.debian.org/debian-security-announce/2008/msg00216.html . -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Unannounced kernel update today? (etch)
On Fri, Aug 22, 2008 at 08:26:30AM -0700, nate wrote: My systems informed me of a kernel update today, but I can't find any indication either on the security web site or the security-announce list that there has been one recently. On the website it seems to be still missing but the mailinglist archive has it. http://lists.debian.org/debian-security-announce/2008/msg00216.html Sven -- If God passed a mic to me to speak I'd say stay in bed, world Sleep in peace [The Cardigans - 03:45: No sleep] -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Unannounced kernel update today? (etch)
Sven Hoexter wrote: On Fri, Aug 22, 2008 at 08:26:30AM -0700, nate wrote: My systems informed me of a kernel update today, but I can't find any indication either on the security web site or the security-announce list that there has been one recently. On the website it seems to be still missing but the mailinglist archive has it. http://lists.debian.org/debian-security-announce/2008/msg00216.html Ahh, ok thanks! I checked the archives but for some reason didn't see it(I think I was doing a top-down search rather than bottom up) nate -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: cannot open display: :0.0 error when using schroot
Aniruddha wrote: I have set up a schroot using this guide: http://alioth.debian.org/docman/view.php/30192/21/debian-amd64-howto.html#id292205 , but for some reason when I try to run a program I get the following error: ~$ schroot -p nero W: Group ‘sbuild’ not found I: [sid chroot] Running command: “nero” (nero:456): Gtk-WARNING **: cannot open display: :0.0 I have set up a succesfull schroot before, the only difference now is that I use sudo. DISPLAY=:0 doesn't work either: (sid32)[EMAIL PROTECTED]:/# export DISPLAY=:0 (sid32)[EMAIL PROTECTED]:/# nero (nero:4231): Gtk-WARNING **: cannot open display: :0 My schroot.conf [sid] description=Debian sid (unstable) location=/var/chroot/sid priority=3 users=rleigh,aniruddha groups=sbuild,aniruddha root-groups=root aliases=unstable,default What does 'xhost' say when you run it as the normal user (before you do the schroot)? You may need to do an 'xhost local:' to allow any local (only your host system logins) user to connect to the display. You will need the DISPLAY=:0.0 exported in the schroot environment, at least. -- Bob McGowan smime.p7s Description: S/MIME Cryptographic Signature
Re: cannot open display: :0.0 error when using schroot
On Fri, 2008-08-22 at 09:43 -0700, Bob McGowan wrote: What does 'xhost' say when you run it as the normal user (before you do the schroot)? You may need to do an 'xhost local:' to allow any local (only your host system logins) user to connect to the display. You will need the DISPLAY=:0.0 exported in the schroot environment, at least. Thanks for the help! Here's the output of those commands: ~$ xhost access control enabled, only authorized clients can connect ~$ xhost local: non-network local connections being added to access control list $ schroot -p nero I: [sid-1516ecae-815d-4eb3-ab8c-c7a94befa26f chroot] Running command: “nero” Gtk-Message: Failed to load module gnomebreakpad: libgnomebreakpad.so: cannot open shared object file: No such file or directory (nero:23894): Gtk-WARNING **: cannot open display: :0.0 Regards, Aniruddha -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Toshiba satellite L40
On Tue, Aug 19, 2008 at 6:24 PM, darren naidoo [EMAIL PROTECTED] wrote: Which is the best os 4 my laptop with drivers etc Have you try Debian? You can start searching by doing some Google search with keywords such as Satellite L40 Linux etc -- Zaki Akhmad -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: compatibility
[snip] I don't know about AutoCAD. Can anyone recommend anything? QCad is something you could check out. It is based on AutoCAD and the interface is quite similar too. -- Regards, Kumar. -- Kumar Ravichandran Graduate Research Assistant Department of Aerospace Engineering University of Maryland College Park, MD. An eye for an eye will only make the entire world blind. - Mohandas Karamchand Gandhi -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: compatibility
On Thu, 2008-08-21 at 14:43 -0400, Kenn Bannerman wrote: I'm looking at various Linux versions but none seem to indicate whether they are compatible with certain software programs such as: AutoCAD Adobe Photoshop et al SoundForge Any info you can supply would greatly help my decision. Thanks very much. Yours sincerely, Kenn Bannerman Depending on which version you would like to use, alle *nix are compatible with these programs thprough Wine: AutoCAD http://appdb.winehq.org/appview.php?iAppId=86 SoundForge http://appdb.winehq.org/objectManager.php?sClass=applicationiId=529 Adobe Photoshop http://appdb.winehq.org/appview.php?appId=17 You could alsouse Crossover office: http://www.codeweavers.com/compatibility/browse/cat/?showall=1;cat_id=2 Or Virtualbox: http://www.virtualbox.org/ Regards, Aniruddha -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: Lenny users: attn about Gnome/libxml2 breakage
Christian Jaeger wrote: Today I did the usual dist-upgrade for my testing install, and it left me with a badly broken (from user's perspective) installation, because basically all Gnome applications stopped working. After a bit over 2 hours worth of investigation, I've found out how to solve the issue; since I first looked here and didn't find anything gnome related, I'm sending this to the list for the casual other victim. Symptom: Gnome apps just hang, without outputting anything to stdout/stderr (or .xsession-errors if started through the menu). Problem: the apps segfault inside libxml2, and thereafter enter a deadlocked state in a mutex (or in a select call); the former is apparently a bug in libxml2, the latter seems to be the Gnome functionality to pop up a windows which seems to have an issue on it's own (so it's really two bugs happening here, obscuring the investigation a bit.) Solution: install libxml2 from unstable; this is actually a downgrade (from libxml2 2.6.32.dfsg-2+lenny to 2.6.32.dfsg-2). I.e. apt-get install -t unstable libxml2/unstable, but you need to have the unstable sources in apt.sources and use apt pinning (I won't explain that here, check other sources). Hi Christian, thanks for the warning and solution. After my dist-upgrade last night, gdm would not start (it gave me a The greeter program appears to be crashing message, and never got to the login screen). But I could start Xorg with 'startx' and all my Gnome programs worked fine (including gnome-appearance-properties). Downgrading libxml2 to the pre-security-update version fixed gdm, so now everything works. Have you opened a bug report on this anywhere? I'm on a Lenovo X60 Tablet, Core Duo: 2.6.26-1-686 #1 SMP Wed Aug 20 12:56:41 UTC 2008 i686 GNU/Linux - Chris Burkhardt -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: cannot open display: :0.0 error when using schroot
Aniruddha wrote: On Fri, 2008-08-22 at 09:43 -0700, Bob McGowan wrote: What does 'xhost' say when you run it as the normal user (before you do the schroot)? You may need to do an 'xhost local:' to allow any local (only your host system logins) user to connect to the display. You will need the DISPLAY=:0.0 exported in the schroot environment, at least. Thanks for the help! Here's the output of those commands: ~$ xhost access control enabled, only authorized clients can connect ~$ xhost local: non-network local connections being added to access control list $ schroot -p nero I: [sid-1516ecae-815d-4eb3-ab8c-c7a94befa26f chroot] Running command: “nero” Gtk-Message: Failed to load module gnomebreakpad: libgnomebreakpad.so: cannot open shared object file: No such file or directory (nero:23894): Gtk-WARNING **: cannot open display: :0.0 Regards, Aniruddha I'd guess libgnomebreakpad.so is not accessible from within the schroot environment. And without it, GTK and nero can't do anything affecting the display. *However*, this is all guesswork, my knowledge of schroot (or chroot, for that matter) is pretty minimal. What I do know is that a chroot is an isolated area that needs to have all the support files, executables and libraries set up correctly within the chroot environment for things to work. After all, it is a jail, intended to keep the user from accessing things above the jail's root directory. Don't know if my ramblings will be of any help ;(, good luck may be the only thing further I can say. -- Bob McGowan smime.p7s Description: S/MIME Cryptographic Signature
Re: Lenny users: attn about Gnome/libxml2 breakage
On Fri, Aug 22, 2008 at 2:12 PM, Chris Burkhardt [EMAIL PROTECTED] wrote: Christian Jaeger wrote: Today I did the usual dist-upgrade for my testing install, and it left me with a badly broken (from user's perspective) installation, because basically all Gnome applications stopped working. After a bit over 2 hours worth of investigation, I've found out how to solve the issue; since I first looked here and didn't find anything gnome related, I'm sending this to the list for the casual other victim. Symptom: Gnome apps just hang, without outputting anything to stdout/stderr (or .xsession-errors if started through the menu). Problem: the apps segfault inside libxml2, and thereafter enter a deadlocked state in a mutex (or in a select call); the former is apparently a bug in libxml2, the latter seems to be the Gnome functionality to pop up a windows which seems to have an issue on it's own (so it's really two bugs happening here, obscuring the investigation a bit.) Solution: install libxml2 from unstable; this is actually a downgrade (from libxml2 2.6.32.dfsg-2+lenny to 2.6.32.dfsg-2). I.e. apt-get install -t unstable libxml2/unstable, but you need to have the unstable sources in apt.sources and use apt pinning (I won't explain that here, check other sources). Hi Christian, thanks for the warning and solution. I second the thanks for the heads-up. I hadn't yet done my daily update, so I put libxml2 and libxml2-utils on hold until I can be sure the new bug is fixed. Patrick -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: compatibility
On Fri, Aug 22, 2008 at 01:53:14PM -0400, Kumar Ravichandran wrote: I don't know about AutoCAD. Can anyone recommend anything? QCad is something you could check out. It is based on AutoCAD and the interface is quite similar too. I think he means the iterface is based on AutoCAD. :-) Kumar -- Kumar Appaiah signature.asc Description: Digital signature
Re: State of 64bit desktop
Hi, On Tue, Aug 19, 2008 at 07:05:19AM +1000, Alex Samad wrote: If I'm hearing folks correctly, is 32-bit flash running out of the box on 64-bit lenny now? If it's not running out of the box, could someone please post a link to a HOWTO? Thanks! apt-get install nspluginwrapper apt-get install flashplayer-mozilla (from the debian multimedia repo) that should be it :) It may work but we now have good packages in official Debian site. For Java, icedtea-gcjwebplugin is in main. (Sun Java is not packaged but this free one is pretty good) For Flash, swfdec-mozilla and mozilla-plugin-gnash are in main while flashplugin-nonfree is contrib. This flashplugin-nonfree load 32bit version using nspluginwrapper. For most video's, mozilla-plugin-gnash is working for me but google street view only works with nonfree flash player. http://people.debian.org/~osamu/pub/getwiki/html/ch08.en.html#webbrowsersinx Osamu -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Nautilus fails to manage desktop
I'm running nautilus 2.20.0-6, and after a recent reboot nautilus is refusing to manage the desktop. I've tried killing nautilus, removing ~/.nautilus and ~/.gconf/apps/nautilus before relaunching it manually, but it simply refused to show the contents of ~/Desktop on the desktop. gconf-editor shows that /apps/nautilus/preferences/show_desktop is enabled, so that doesn't seem to be the issue, either. What else can I do to restore my desktop icons and allow nautilus to manage the desktop? -- Oh, look: rocks! -- Doctor Who, Destiny of the Daleks -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of unsubscribe. Trouble? Contact [EMAIL PROTECTED]
Re: What is the best way to deal with changing device names in Debian?
On Sun,17.Aug.08, 13:35:18, abel wrote: question 1 -- [...] Are the new menu.lst lines correct? question 2 -- update-grub should be run after the update to /etc/fstab. correct? Read menu.lst, it's self-documenting. Regards, Andrei -- If you can't explain it simply, you don't understand it well enough. (Albert Einstein) signature.asc Description: Digital signature
